Document the new parameter and threshod computation
model. Also fix a bug when the threshold parameter
is set to be different from the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272749 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: With runtime profile, we have more confidence in branch probability, thus during basic block layout, we set a lower hot prob threshold so that blocks can be layouted optimally.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272729 91177308-0d34-0410-b5e6-96231b3b80d8
Save machine function pointer so that
the reference does not need to be passed around.
This also gives other methods access to machine
function for information such as entry count etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272594 91177308-0d34-0410-b5e6-96231b3b80d8
This is third patch to clean up the code.
Included in this patch:
1. Further unclutter trace/chain formation main routine;
2. Isolate the logic to compute global cost/conflict detection
into its own method;
3. Heavily document the selection algorithm;
4. Added helper hook to allow PGO specific logic to be
added in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272582 91177308-0d34-0410-b5e6-96231b3b80d8
This is second patch to clean up the code.
In this patch, the logic to determine block outlinining
is refactored and more comments are added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272514 91177308-0d34-0410-b5e6-96231b3b80d8
This is one of the patches to clean up the code so that
it is in a better form to make future enhancements easier.
In htis patch, the logic to collect viable successors are
extrated as a helper to unclutter the caller which gets very
large recenty. Also cleaned up BP adjustment code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272482 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies commit r271930, r271915, r271923. They hit a bug in
Thumb which is fixed in r272258 now.
The original message:
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272267 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Consider the following diamond CFG:
A
/ \
B C
\/
D
Suppose A->B and A->C have probabilities 81% and 19%. In block-placement, A->B is called a hot edge and the final placement should be ABDC. However, the current implementation outputs ABCD. This is because when choosing the next block of B, it checks if Freq(C->D) > Freq(B->D) * 20%, which is true (if Freq(A) = 100, then Freq(B->D) = 81, Freq(C->D) = 19, and 19 > 81*20%=16.2). Actually, we should use 25% instead of 20% as the probability here, so that we have 19 < 81*25%=20.25, and the desired ABDC layout will be generated.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20989
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272203 91177308-0d34-0410-b5e6-96231b3b80d8
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
Differential Revision: http://reviews.llvm.org/D20276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271925 91177308-0d34-0410-b5e6-96231b3b80d8
The benefits of this patch are
-- We call AnalyzeBranch() to optimize unanalyzable branches, but the result of
AnalyzeBranch() is not used. Now the result is useful.
-- Before the layout of all the MBBs is set, the result of AnalyzeBranch() is
not correct and needs to be fixed before using it to optimize the branch
conditions. Now this optimization is called after the layout, the code used
to fix the result of AnalyzeBranch() is not needed.
-- The branch condition of the last block is not optimized before. Now it is
optimized.
Differential Revision: http://reviews.llvm.org/D20177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270623 91177308-0d34-0410-b5e6-96231b3b80d8
Currently cost based loop rotation algo can only be turned on with
two conditions: the function has real profile data, and -precise-rotation-cost
flag is turned on. This is not convenient for developers to experiment
when profile is not available. Add a new option to force the new
rotation algorithm -force-precise-rotation-cost
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269266 91177308-0d34-0410-b5e6-96231b3b80d8
After the layout of the basic blocks is set, the target may be able to get rid
of unconditional branches to fallthrough blocks that the generic code does not
catch. This happens any time TargetInstrInfo::AnalyzeBranch is not able to
analyze all the branches involved in the terminators sequence, while still
understanding a few of them.
In such situation, AnalyzeBranch can directly modify the branches if it has been
instructed to do so.
This patch takes advantage of that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268328 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267022 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
EHPad BB are not entered the classic way and therefor do not need to be placed after their predecessors. This patch make sure EHPad BB are not chosen amongst successors to form chains, and are selected as last resort when selecting the best candidate.
EHPad are scheduled in reverse probability order in order to have them flow into each others naturally.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17625
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265726 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: There are places in MachineBlockPlacement where a worklist is filled in pretty much identical way. The code is duplicated. This refactor it so that the same code is used in both scenarii.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18077
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263495 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a loop with a rarely taken path, we will prune that from the blocks which get added as part of the loop chain. The problem is that we weren't then recognizing the loop chain as schedulable when considering the preheader when forming the function chain. We'd then fall to various non-predecessors before finally scheduling the loop chain (as if the CFG was unnatural.) The net result was that there could be lots of garbage between a loop preheader and the loop, even though we could have directly fallen into the loop. It also meant we separated hot code with regions of colder code.
The particular reason for the rejection of the loop chain was that we were scanning predecessor of the header, seeing the backedge, believing that was a globally more important predecessor (true), but forgetting to account for the fact the backedge precessor was already part of the existing loop chain (oops!.
Differential Revision: http://reviews.llvm.org/D17830
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262547 91177308-0d34-0410-b5e6-96231b3b80d8
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254377 91177308-0d34-0410-b5e6-96231b3b80d8
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254366 91177308-0d34-0410-b5e6-96231b3b80d8
The root cause is the rounding behavior in BranchProbability construction. We may consider to use truncation instead in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254356 91177308-0d34-0410-b5e6-96231b3b80d8
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254348 91177308-0d34-0410-b5e6-96231b3b80d8
When looking for the best successor from the outer loop for a block
belonging to an inner loop, the edge probability computation can be
improved so that edges in the inner loop are ignored. For example,
suppose we are building chains for the non-loop part of the following
code, and looking for B1's best successor. Assume the true body is very
hot, then B3 should be the best candidate. However, because of the
existence of the back edge from B1 to B0, the probability from B1 to B3
can be very small, preventing B3 to be its successor. In this patch, when
computing the probability of the edge from B1 to B3, the weight on the
back edge B1->B0 is ignored, so that B1->B3 will have 100% probability.
if (...)
do {
B0;
... // some branches
B1;
} while(...);
else
B2;
B3;
Differential revision: http://reviews.llvm.org/D10825
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253414 91177308-0d34-0410-b5e6-96231b3b80d8
In the current BB placement algorithm, a loop chain always contains all loop blocks. This has a drawback that cold blocks in the loop may be inserted on a hot function path, hence increasing branch cost and also reducing icache locality.
Consider a simple example shown below:
A
|
B⇆C
|
D
When B->C is quite cold, the best BB-layout should be A,B,D,C. But the current implementation produces A,C,B,D.
This patch filters those cold blocks off from the loop chain by comparing the ratio:
LoopBBFreq / LoopFreq
to 20%: if it is less than 20%, we don't include this BB to the loop chain. Here LoopFreq is the frequency of the loop when we reduce the loop into a single node. In general we have more cold blocks when the loop has few iterations. And vice versa.
Differential revision: http://reviews.llvm.org/D11662
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251833 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, in MachineBlockPlacement pass the loop is rotated to let the best exit to be the last BB in the loop chain, to maximize the fall-through from the loop to outside. With profile data, we can determine the cost in terms of missed fall through opportunities when rotating a loop chain and select the best rotation. Basically, there are three kinds of cost to consider for each rotation:
1. The possibly missed fall through edge (if it exists) from BB out of the loop to the loop header.
2. The possibly missed fall through edges (if they exist) from the loop exits to BB out of the loop.
3. The missed fall through edge (if it exists) from the last BB to the first BB in the loop chain.
Therefore, the cost for a given rotation is the sum of costs listed above. We select the best rotation with the smallest cost. This is only for PGO mode when we have more precise edge frequencies.
Differential revision: http://reviews.llvm.org/D10717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250754 91177308-0d34-0410-b5e6-96231b3b80d8
Remove implicit ilist iterator conversions from MachineBasicBlock.cpp.
I've also added an overload of `splice()` that takes a pointer, since
it's a natural API. This is similar to the overloads I added for
`remove()` and `erase()` in r249867.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249883 91177308-0d34-0410-b5e6-96231b3b80d8
