Add the necessary definitions for RISC-V ELF files, including relocs. Also
make necessary trivial change to ELFYaml, llvm-objdump, and llvm-readobj in
order to work with RISC-V ELFs.
Differential Revision: https://reviews.llvm.org/D23557
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285708 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no point to importing at -O0, since we won't inline. We should
also disable other cross-module optimizations.
(Plan to backport this fix to the 3.9 branch to fix PR30774)
Reviewers: pcc
Subscribers: johanengelen, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25918
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285648 91177308-0d34-0410-b5e6-96231b3b80d8
DW_TAG_atomic_type was already included in Dwarf.defs and emitted correctly,
however Verifier didn't recognize it as valid.
Thus we introduce the following changes:
* Make DW_TAG_atomic_type valid tag for IR and DWARF (enabled only with -gdwarf-5)
* Add it to related docs
* Add DebugInfo tests
Differential Revision: https://reviews.llvm.org/D26144
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285624 91177308-0d34-0410-b5e6-96231b3b80d8
Modifying DWARFFormValue to remember the DWARFUnit that it was encoded with can simplify the usage of instances of this class. Previously users would have to try and pass in the same DWARFUnit that was used to decode the form value and there was a possibility that a different DWARFUnit might be supplied to the functions that extract values (strings, CU relative references, addresses) and cause problems. This fixes this potential issue by storing the DWARFUnit inside the DWARFFormValue so that this mistake can't be made. Instances of DWARFFormValue are not stored permanently and are used as temporary values, so the increase in size of an instance of DWARFFormValue isn't a big deal. This makes decoding form values more bullet proof and is a change that will be used by future modifications.
https://reviews.llvm.org/D26052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285594 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the version of report_error were quoting the filename and
printing a colon between the file name and the error message, but this
one wasn't doing either of those. Fix the output to be more
consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285252 91177308-0d34-0410-b5e6-96231b3b80d8
Usage:
llvm-xray extract <object file> [-o <filename or '-'>]
The tool gets the XRay instrumentation map from an object file and turns
it into YAML. We first support ELF64 sleds on x86_64 binaries, with
provision for supporting other supported platforms and formats later.
This is the first of a many-part change to fully implement the
`llvm-xray` tool.
We also define a subcommand registration and dispatch mechanism to be
used by other further subcommand implementations for llvm-xray.
Diffusion Revision: https://reviews.llvm.org/D21987
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285165 91177308-0d34-0410-b5e6-96231b3b80d8
Usage:
llvm-xray extract <object file> [-o <filename or '-'>]
The tool gets the XRay instrumentation map from an object file and turns
it into YAML. We first support ELF64 sleds on x86_64 binaries, with
provision for supporting other supported platforms and formats later.
This is the first of a many-part change to fully implement the
`llvm-xray` tool.
We also define a subcommand registration and dispatch mechanism to be
used by other further subcommand implementations for llvm-xray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285155 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
Thanks to Adrian Prantl for stewarding this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285094 91177308-0d34-0410-b5e6-96231b3b80d8
In an IR symbol table I would expect the comdats to be represented as:
- A table of strings, one for each comdat name.
- Each symbol has an optional index into that table.
The natural api for accessing that would be
InputFile:
ArrayRef<StringRef> getComdatTable() const;
Symbol:
int getComdatIndex() const;
This patch implements an API as close to that as possible. The
implementation on top of the current IRObjectFile is a bit hackish,
but should map just fine over a symbol table and is very convenient to
use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285061 91177308-0d34-0410-b5e6-96231b3b80d8
When we load coverage data from multiple objects, we don't have a way to
attribute a source object to a function record. Printing out the object
filename next to the source filename is already not very useful: soon,
it'll actually become misleading. Stop printing out the filename now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285043 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Most of the changes are very straight-forward. The only choice I had to make was
to use second-precision time points in the Archive classes. I did this because
the archive files use that precision in the on-disk representation anyway.
Reviewers: rafael, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25773
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284974 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow-up to D25416. It removes all usages of TimeValue from
llvm/Support library (except for the actual TimeValue declaration), and replaces
them with appropriate usages of std::chrono. To facilitate this, I have added
small utility functions for converting time points and durations into appropriate
OS-specific types (FILETIME, struct timespec, ...).
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25730
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284966 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the implementation of OptReportLocationInfo's operator < so that contexts
with different unroll counts are reported separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284957 91177308-0d34-0410-b5e6-96231b3b80d8
iterating over an archive with object and non-object members that
would cause an Abort because to was not calling consumeError()
when the code was wanting to ignore a non-object file.
Found by Justin Bogner!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284867 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This adds support for dumping the globals stream from PDB files using llvm-pdbdump, similar to the support we have for the publics stream.
Reviewers: ruiu, zturner
Subscribers: beanz, mgorny, modocache
Differential Revision: https://reviews.llvm.org/D25801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284861 91177308-0d34-0410-b5e6-96231b3b80d8
the ARM_THREAD_STATE in the same format as
otool-classic(1) on darwin.
Also remove an extra space in printing the initprot to make
the output match otool-classic(1) on darwin.
rdar://28851457
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284852 91177308-0d34-0410-b5e6-96231b3b80d8
This was all using ArrayRef<>s before which presents a problem
when you want to serialize to or deserialize from an actual
PDB stream. An ArrayRef<> is really just a special case of
what can be handled with StreamInterface though (e.g. by using
a ByteStream), so changing this to use StreamInterface allows
us to plug in a PDB stream and get all the record serialization
and deserialization for free on a MappedBlockStream.
Subsequent patches will try to remove TypeTableBuilder and
TypeRecordBuilder in favor of class that operate on
Streams as well, which should allow us to completely merge
the reading and writing codepaths for both types and symbols.
Differential Revision: https://reviews.llvm.org/D25831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284762 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have dropped MSVC 2013, all supported compilers support
noexcept and we can drop this portability macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284672 91177308-0d34-0410-b5e6-96231b3b80d8
Profile runtime can generate an empty raw profile (when there is no function in
the shared library). This empty profile is treated as a text format profile. A
test format profile without the flag of "#IR" is thought to be a clang
generated profile. So in llvm profile merging, we will get a bogus warning of
"Merge IR generated profile with Clang generated profile."
The fix here is to skip the empty profile (when the buffer size is 0) for
profile merge.
Reviewers: vsk, davidxl
Differential Revision: http://reviews.llvm.org/D25687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284659 91177308-0d34-0410-b5e6-96231b3b80d8
Initializing a ThreadPool with ThreadCount = 1 spawns a thread even
though we don't need to. This is at least slower than it needs to be,
and at worst may somehow be exacerbating PR30735 (llvm-cov times out
on ARM bots).
As a follow-up, I'll try to add logic to llvm::ThreadPool to avoid
spawning a thread when ThreadCount = 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284621 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Changes default backend parallelism from thread::hardware_concurrency to
the new llvm::heavyweight_hardware_concurrency, which for X86 Linux
defaults to the number of physical cores (and will fall back to
thread::hardware_concurrency otherwise). This avoid oversubscribing
the physical cores using hyperthreading.
Reviewers: mehdi_amini, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25775
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284618 91177308-0d34-0410-b5e6-96231b3b80d8
This is just a quick utility handy for getting rough summaries of types
in a given object or dwo file. I've been using it to investigate the
amount of type info redundancy across a project build, for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284537 91177308-0d34-0410-b5e6-96231b3b80d8
debugger.
When bugpoint hacks at a testcase it may at one point create illegal
debug info metadata that won't even pass the Verifier. A bugpoint
*driver* built with assertions should not assert on it, but reject the
malformed intermediate step and continue to do its job.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284490 91177308-0d34-0410-b5e6-96231b3b80d8
Module inline asm was always being linked/concatenated
when running the IRLinker. This is correct for full LTO but not when
we are importing for ThinLTO, as it can result in multiply defined
symbols when the module asm defines a global symbol.
In order to test with llvm-lto2, I had to work around PR30396,
where a symbol that is defined in module assembly but defined in the
LLVM IR appears twice. Added workaround to llvm-lto2 with a FIXME.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25359
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284030 91177308-0d34-0410-b5e6-96231b3b80d8
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283671 91177308-0d34-0410-b5e6-96231b3b80d8
We need to add an entry in the combined-index for modules that have
a hash but otherwise empty summary, this is needed so that we can
get the hash for the module.
Also, if no entry is present in the combined index for a module, we
need to skip it when trying to compute a cache entry.
Differential Revision: https://reviews.llvm.org/D25300
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283654 91177308-0d34-0410-b5e6-96231b3b80d8
