When the ProcessAllSections flag (introduced in r204398) is set RuntimeDyld is
supposed to make a call to the client's memory manager for every section in each
object that is loaded. Due to some missing checks, this was not happening in all
cases. This patch adds the missing cases, and fixes the Orc unit test that
verifies correct behavior for ProcessAllSections (The unit test had been
silently bailing out due to an ordering issue: a change in the test order meant
that this unit-test was running before the native target was registered. This
issue has also been fixed in this patch).
This fixes <rdar://problem/22789965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299449 91177308-0d34-0410-b5e6-96231b3b80d8
N32 relocations are only correct for individual relocations at the moment.
Support for relocation composition will follow in a later patch.
Patch By: Daniel Sanders
Reviwers: vkalintiris, atanasyan
Differential Revision: https://reviews.llvm.org/D27467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289532 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have dropped MSVC 2013, all supported compilers support
noexcept and we can drop this portability macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284672 91177308-0d34-0410-b5e6-96231b3b80d8
This patch causes RuntimeDyld to check for existing definitions when it
encounters weak symbols. If a definition already exists then the new weak
definition is discarded. All symbol lookups within a "logical dylib" should now
agree on the address of any given weak symbol. This allows the JIT to better
match the behavior of the static linker for C++ code.
This support is only partial, as it does not allow strong definitions that
occur after the first weak definition (in JIT symbol lookup order) to override
the previous weak definitions. Support for this will be added in a future
patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278065 91177308-0d34-0410-b5e6-96231b3b80d8
Common symbol support in ORC was broken in r270716 when the symbol resolution
rules in RuntimeDyld were changed. With the switch to lazily materialized
symbols in r277386, common symbols can be supported by having
RuntimeDyld::emitCommonSymbols search for (but not materialize!) definitions
elsewhere in the logical dylib.
This patch adds the 'Common' flag to JITSymbolFlags, and the necessary check
to RuntimeDyld::emitCommonSymbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277397 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces RuntimeDyld::SymbolInfo with JITSymbol: A symbol class
that is capable of lazy materialization (i.e. the symbol definition needn't be
emitted until the address is requested). This can be used to support common
and weak symbols in the JIT (though this is not implemented in this patch).
For consistency, RuntimeDyld::SymbolResolver is renamed to JITSymbolResolver.
For space efficiency a new class, JITEvaluatedSymbol, is introduced that
behaves like the old RuntimeDyld::SymbolInfo - i.e. it is just a pair of an
address and symbol flags. Instances of JITEvaluatedSymbol can be used in
symbol-tables to avoid paying the space cost of the materializer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277386 91177308-0d34-0410-b5e6-96231b3b80d8
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273701 91177308-0d34-0410-b5e6-96231b3b80d8
searching for external symbols, and fall back to the SymbolResolver::findSymbol
method if the former returns null.
This makes RuntimeDyld behave more like a static linker: Symbol definitions
from within the current module's "logical dylib" will be preferred to
external definitions. We can build on this behavior in the future to properly
support weak symbol handling.
Custom symbol resolvers that override the findSymbolInLogicalDylib method may
notice changes due to this patch. Clients who have not overridden this method
should generally be unaffected, however users of the OrcMCJITReplacement class
may notice changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270716 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268298 91177308-0d34-0410-b5e6-96231b3b80d8
Also replaces a number of calls to report_fatal_error with Error returns.
The plumbing will make it easier to return errors originating in libObject.
Replacing report_fatal_errors with Error returns will give JIT clients the
opportunity to recover gracefully when the JIT is unable to produce/relocate
code, as well as providing meaningful error messages that can be used to file
bug reports.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267776 91177308-0d34-0410-b5e6-96231b3b80d8
The previous allocation code was over-estimating the amount of memory required.
No test case: we don't currently have a good way to detect conervative
over-allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267041 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266919 91177308-0d34-0410-b5e6-96231b3b80d8
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264187 91177308-0d34-0410-b5e6-96231b3b80d8
This is a more generic version of the MCJITMemoryManager::notifyObjectLoaded
method: It provides only a RuntimeDyld reference (rather than an
ExecutionEngine), and so can be used with ORC JIT stacks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257296 91177308-0d34-0410-b5e6-96231b3b80d8
RuntimeDyld::MemoryManager.
The RuntimeDyld::MemoryManager::reserveAllocationSpace method is called when
object files are loaded, and gives clients a chance to pre-allocate memory for
all segments. Previously only the size of each segment (code, ro-data, rw-data)
was supplied but not the alignment. This hasn't caused any problems so far, as
most clients allocate via the MemoryBlock interface which returns page-aligned
blocks. Adding alignment arguments enables finer grained allocation while still
satisfying alignment restrictions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257294 91177308-0d34-0410-b5e6-96231b3b80d8
managers.
Prior to this patch, recursive finalization (where finalization of one
RuntimeDyld instance triggers finalization of another instance on which the
first depends) could trigger memory access failures: When the inner (dependent)
RuntimeDyld instance and its memory manager are finalized, memory allocated
(but not yet relocated) by the outer instance is locked, and relocation in the
outer instance fails with a memory access error.
This patch adds a latch to the RuntimeDyld::MemoryManager base class that is
checked by a new method: RuntimeDyld::finalizeWithMemoryManagerLocking, ensuring
that shared memory managers are only finalized by the outermost RuntimeDyld
instance.
This allows ORC clients to supply the same memory manager to multiple calls to
addModuleSet. In particular it enables the use of user-supplied memory managers
with the CompileOnDemandLayer which must reuse the supplied memory manager for
each function that is lazily compiled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257263 91177308-0d34-0410-b5e6-96231b3b80d8
DenseMap is most applicable when both keys and values are small.
In this case, the value violates that assumption, causing quite
significant memory overhead. A std::unordered_map is more appropriate
in this case (or at least fixed the memory problems I was seeing).
Differential Revision: http://reviews.llvm.org/D14910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254651 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For relocation types that are known to not require stub functions, there
is no need to allocate extra space for the stub functions.
Reviewers: lhames, reames, maksfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253920 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Change SectionEntry to keep track of the size of its underlying
allocation, and use that to bounds check advanceStubOffset.
Reviewers: lhames, andrew.w.kaylor, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14675
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253919 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove naked access to the data members in `SectionEntry` and route
accesses through accessor functions. This makes it obvious how the
instances of the class are used, and will also facilitate adding bounds
checking to `advanceStubOffset` in a later change.
Reviewers: lhames, loladiro, andrew.w.kaylor
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253918 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: ELF's STT_File symbols may overlap with regular globals in
other files, so we should ignore them here in order to avoid having
bogus entries in the symbol table that confuse us when resolving relocations.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250942 91177308-0d34-0410-b5e6-96231b3b80d8
(e.g. bss sections).
MachO and ELF have been silently letting this pass, but COFFObjectFile contains
an assertion to catch this kind of (ab)use of the getSectionContents, and this
was causing the JIT to crash on COFF objects with BSS sections. This patch
should fix that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250371 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Rather than just iterating over all sections and checking whether we have relocations for them, iterate over the relocation map instead. This showed up heavily in an artificial julia benchmark that does lots of compilation. On that particular benchmark, this patch gives
~15% performance improvements. As far as I can tell the primary reason why the original
loop was so expensive is that Relocations[i] actually constructs a relocationList (allocating memory & doing lots of other unnecessary computing) if none is found.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13545
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249942 91177308-0d34-0410-b5e6-96231b3b80d8
before any relocations have been applied, and again after all relocations have
been applied.
Previously each section was dumped before and after relocations targetting it
were applied, but this only shows the impact of relocations that point to other
symbols in the same section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247335 91177308-0d34-0410-b5e6-96231b3b80d8
Code-section alignment should be at least as high as the minimum
stub alignment. If the section alignment is lower it can cause
padding to be emitted resulting in alignment errors if the section
is mapped to a higher alignment on the target.
E.g. If a text section with a 4-byte alignment gets 4-bytes of
padding to guarantee 8-byte alignment for stubs but is re-mapped to
an 8-byte alignment on the target, the 4-bytes of padding will push
the stubs to 4-byte alignment causing a crash.
No test case: There is currently no way to control host section
alignment in llvm-rtdyld. This could be made testable by adding
a custom memory manager. I'll look at that in a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245031 91177308-0d34-0410-b5e6-96231b3b80d8
This function can actually fail since the symbol contains an index to the
section and that can be invalid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244375 91177308-0d34-0410-b5e6-96231b3b80d8
Requested by Eugene Rozenfeld of the LLILC team, this feature allows JIT
clients to skip relocations for selected external symbols by returning ~0ULL
from their symbol resolver. If this value is returned for a given symbol,
RuntimeDyld will skip all relocations for that symbol. The client will be
responsible for applying the skipped relocations manually before the code
is executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241383 91177308-0d34-0410-b5e6-96231b3b80d8
This function can really fail since the string table offset can be out of
bounds.
Using ErrorOr makes sure the error is checked.
Hopefully a lot of the boilerplate code in tools/* can go away once we have
a diagnostic manager in Object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241297 91177308-0d34-0410-b5e6-96231b3b80d8
This is still a really odd function. Most calls are in object format specific
contexts and should probably be replaced with a more direct query, but at least
now this is not too obnoxious to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240777 91177308-0d34-0410-b5e6-96231b3b80d8
COFF and MachO only define symbol sizes for common symbols. Reflect that
in the class hierarchy by having a method for common symbols only in the base
and a general one in ELF.
This avoids the need of using a magic value for the size, which had a few
problems
* Most callers didn't check for it.
* The ones that did could not tell the magic value from a file actually having
that value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240529 91177308-0d34-0410-b5e6-96231b3b80d8
