Summary:
For the following CFG:
A->B
B->C
A->C
If there is another edge B->D, then ABC should not be considered as triangle.
Reviewers: davidxl, iteratee
Reviewed By: iteratee
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D31310
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298661 91177308-0d34-0410-b5e6-96231b3b80d8
I had ajusted the test case before when testing a chain of length 2, and then
reverted it with rL296845 when I switched to 3 triangles. After running
benchmarks and examining generated code at length 2 I forgot to put the test
back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298000 91177308-0d34-0410-b5e6-96231b3b80d8
For chains of triangles with small join blocks that can be tail duplicated, a
simple calculation of probabilities is insufficient. Tail duplication
can be profitable in 3 different ways for these cases:
1) The post-dominators marked 50% are actually taken 56% (This shrinks with
longer chains)
2) The chains are statically correlated. Branch probabilities have a very
U-shaped distribution.
[http://nrs.harvard.edu/urn-3:HUL.InstRepos:24015805]
If the branches in a chain are likely to be from the same side of the
distribution as their predecessor, but are independent at runtime, this
transformation is profitable. (Because the cost of being wrong is a small
fixed cost, unlike the standard triangle layout where the cost of being
wrong scales with the # of triangles.)
3) The chains are dynamically correlated. If the probability that a previous
branch was taken positively influences whether the next branch will be
taken
We believe that 2 and 3 are common enough to justify the small margin in 1.
The code pre-scans a function's CFG to identify this pattern and marks the edges
so that the standard layout algorithm can use the computed results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296845 91177308-0d34-0410-b5e6-96231b3b80d8
Lay out trellis-shaped CFGs optimally.
A trellis of the shape below:
A B
|\ /|
| \ / |
| X |
| / \ |
|/ \|
C D
would be laid out A; B->C ; D by the current layout algorithm. Now we identify
trellises and lay them out either A->C; B->D or A->D; B->C. This scales with an
increasing number of predecessors. A trellis is a a group of 2 or more
predecessor blocks that all have the same successors.
because of this we can tail duplicate to extend existing trellises.
As an example consider the following CFG:
B D F H
/ \ / \ / \ / \
A---C---E---G---Ret
Where A,C,E,G are all small (Currently 2 instructions).
The CFG preserving layout is then A,B,C,D,E,F,G,H,Ret.
The current code will copy C into B, E into D and G into F and yield the layout
A,C,B(C),E,D(E),F(G),G,H,ret
define void @straight_test(i32 %tag) {
entry:
br label %test1
test1: ; A
%tagbit1 = and i32 %tag, 1
%tagbit1eq0 = icmp eq i32 %tagbit1, 0
br i1 %tagbit1eq0, label %test2, label %optional1
optional1: ; B
call void @a()
br label %test2
test2: ; C
%tagbit2 = and i32 %tag, 2
%tagbit2eq0 = icmp eq i32 %tagbit2, 0
br i1 %tagbit2eq0, label %test3, label %optional2
optional2: ; D
call void @b()
br label %test3
test3: ; E
%tagbit3 = and i32 %tag, 4
%tagbit3eq0 = icmp eq i32 %tagbit3, 0
br i1 %tagbit3eq0, label %test4, label %optional3
optional3: ; F
call void @c()
br label %test4
test4: ; G
%tagbit4 = and i32 %tag, 8
%tagbit4eq0 = icmp eq i32 %tagbit4, 0
br i1 %tagbit4eq0, label %exit, label %optional4
optional4: ; H
call void @d()
br label %exit
exit:
ret void
}
here is the layout after D27742:
straight_test: # @straight_test
; ... Prologue elided
; BB#0: # %entry ; A (merged with test1)
; ... More prologue elided
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_2
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_3
b .LBB0_4
.LBB0_2: # %optional1 ; B (copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_4
.LBB0_3: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_5
b .LBB0_6
.LBB0_4: # %optional2 ; D (copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_5: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
b .LBB0_7
.LBB0_6: # %optional3 ; F (copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit ; Ret
ld 30, 96(1) # 8-byte Folded Reload
addi 1, 1, 112
ld 0, 16(1)
mtlr 0
blr
The tail-duplication has produced some benefit, but it has also produced a
trellis which is not laid out optimally. With this patch, we improve the layouts
of such trellises, and decrease the cost calculation for tail-duplication
accordingly.
This patch produces the layout A,C,E,G,B,D,F,H,Ret. This layout does have
back edges, which is a negative, but it has a bigger compensating
positive, which is that it handles the case where there are long strings
of skipped blocks much better than the original layout. Both layouts
handle runs of executed blocks equally well. Branch prediction also
improves if there is any correlation between subsequent optional blocks.
Here is the resulting concrete layout:
straight_test: # @straight_test
; BB#0: # %entry ; A (merged with test1)
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_4
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_5
.LBB0_2: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_3: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
bne 0, .LBB0_7
b .LBB0_8
.LBB0_4: # %optional1 ; B (Copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_2
.LBB0_5: # %optional2 ; D (Copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_3
.LBB0_6: # %optional3 ; F (Copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit
Differential Revision: https://reviews.llvm.org/D28522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295223 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291695 91177308-0d34-0410-b5e6-96231b3b80d8
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291609 91177308-0d34-0410-b5e6-96231b3b80d8
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283934 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r283842.
test/CodeGen/X86/tail-dup-repeat.ll causes and llc crash with our
internal testing. I'll share a link with you.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283857 91177308-0d34-0410-b5e6-96231b3b80d8
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283842 91177308-0d34-0410-b5e6-96231b3b80d8
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Differential revision: https://reviews.llvm.org/D18226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283619 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 062ace9764953e9769142c1099281a345f9b6bdc.
Issue with loop info and block removal revealed by polly.
I have a fix for this issue already in another patch, I'll re-roll this
together with that fix, and a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283292 91177308-0d34-0410-b5e6-96231b3b80d8
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well.
Differential revision: https://reviews.llvm.org/D18226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283274 91177308-0d34-0410-b5e6-96231b3b80d8
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283164 91177308-0d34-0410-b5e6-96231b3b80d8
