The unused dummy src2_modifiers is missing, so it crashes
when trying to print it.
I tried to fully remove src2_modifiers, but there are some
irritations in the places where it is converted to mad since
it starts to require modifying use lists while iterating over
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299861 91177308-0d34-0410-b5e6-96231b3b80d8
- corrected DS_GWS_* opcodes (see VI_Shader_Programming#16.pdf for detailed description)
- address operand is not used
- several opcodes have data operand
- all opcodes have offset modifier
- DS_AND_SRC2_B32: corrected typo in mnemo
- DS_WRAP_RTN_F32 replaced with DS_WRAP_RTN_B32
- added CI/VI opcodes:
- DS_CONDXCHG32_RTN_B64
- DS_GWS_SEMA_RELEASE_ALL
- added VI opcodes:
- DS_CONSUME
- DS_APPEND
- DS_ORDERED_COUNT
Differential Revision: https://reviews.llvm.org/D31707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299767 91177308-0d34-0410-b5e6-96231b3b80d8
This is somewhat tricky because there are two
pairs of tied operands, and it isn't allowed to be
VOP3 encoded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296519 91177308-0d34-0410-b5e6-96231b3b80d8
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294558 91177308-0d34-0410-b5e6-96231b3b80d8
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294437 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293417 91177308-0d34-0410-b5e6-96231b3b80d8
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292922 91177308-0d34-0410-b5e6-96231b3b80d8
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292117 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions: fctidu[.], fctiwu[.], ftdiv, ftsqrt are not implemented. Implement
them and add corresponding test cases in this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291116 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290336 91177308-0d34-0410-b5e6-96231b3b80d8
Since 32-bit instructions with 32-bit input immediate behavior
are used to materialize 16-bit constants in 32-bit registers
for 16-bit instructions, determining the legality based
on the size is incorrect. Change operands to have the size
specified in the type.
Also adds a workaround for a disassembler bug that
produces an immediate MCOperand for an operand that
is supposed to be OPERAND_REGISTER.
The assembler appears to accept out of bounds immediates and
truncates them, but this seems to be an issue for 32-bit
already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289306 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288526 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288525 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288031 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288029 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288028 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286587 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286586 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286585 91177308-0d34-0410-b5e6-96231b3b80d8
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286285 91177308-0d34-0410-b5e6-96231b3b80d8
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286284 91177308-0d34-0410-b5e6-96231b3b80d8
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286283 91177308-0d34-0410-b5e6-96231b3b80d8
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286263 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285590 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285574 91177308-0d34-0410-b5e6-96231b3b80d8
