This will allow for much easier testing when the input files are in a
different folder from the test script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194034 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables llvm-cov to correctly output the run count stored in
the GCDA file. GCOVProfiling currently does not generate this
information, so the GCDA run data had to be hacked on from a GCDA file
generated by gcc. This is corrected by a subsequent patch.
With the run and program data included, both llvm-cov and gcov produced
the same output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194033 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193865 91177308-0d34-0410-b5e6-96231b3b80d8
The function verifyFunction() in lib/IR/Verifier.cpp misses some
calls. It creates a temporary FunctionPassManager that will run a
single Verifier pass. Unfortunately, FunctionPassManager is no
PassManager and does not call doInitialization() and doFinalization()
by itself. Verifier does important tasks in doInitialization() such as
collecting type information used to check DebugInfo metadata and
doFinalization() does some additional checks. Therefore these checks
were missed and debug info couldn't be verified at all, it just
crashed if the function had some.
verifyFunction() is currently not used in llvm unless -debug option is
enabled, and in unittests/IR/VerifierTest.cpp
VerifierTest had to be changed to create the function in a module from
which the type debug info can be collected.
Patch by Michael Kruse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193719 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-cov will now be able to read program counts from the GCDA file and
output it in the same format as gcov. The program summary tag was
identified from gcov-io.h as "\0\0\0\a3".
There is currently a bug in GCOVProfiling.cpp which does not generate
the
run- or program-counting IR, so this change was tested manually by
modifying the GCDA file and comparing the gcov and llvm-cov outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193389 91177308-0d34-0410-b5e6-96231b3b80d8
This was a fundamental flaw in llvm-cov where it treated the values in
the GCDA files as block counts instead of edge counts. This created
incorrect line counts when branching was present. Instead, the edge
counts should be summed to obtain the correct block count.
The fix was tested using custom test files as well as single source
files from the test-suite directory. The behaviour can be verified by
reading the GCOV documentation that describes the GCDA spec ("ARC_COUNTS
gives the counter values for those arcs that are instrumented") and the
header description provided by GCOVProfiling.cpp ("instruments the code
that runs to records (sic) the edges between blocks that run and emit a
complementary "gcda" file on exit").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193299 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few motivations for this:
- Using a map allows for checking if line is in map. This differentiates
unexecutable lines (such as comments) from unexecuted logical lines of
code. "#####" is now outputted in this case, in line with gcov.
- Source files are no longer read in twice: once when storing the line
counts, and once when outputting the data.
- Greatly simplifies the function FileInfo::addLineCount().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193264 91177308-0d34-0410-b5e6-96231b3b80d8
Major steps include:
1). introduces a not-addr-taken bit-field in GlobalVariable
2). GlobalOpt pass sets "not-address-taken" if it proves a global varirable
dosen't have its address taken.
3). AA use this info for disambiguation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193251 91177308-0d34-0410-b5e6-96231b3b80d8
The loop bounds here are uint32_t variables, so it makes sense for the
loop variables to have the same type.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193192 91177308-0d34-0410-b5e6-96231b3b80d8
Rename Size to EndPos, which makes more sense because the variable
stores the last location of the blocks.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193189 91177308-0d34-0410-b5e6-96231b3b80d8
Line counts in llvm-cov are read in as 64-bit integers but were being truncated
to 32-bit in collectLineCounts(), which caused overflow for large counts.
This patch fixes all counts to be uint64_t.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193172 91177308-0d34-0410-b5e6-96231b3b80d8
- Replaced tabs with proper padding
- print() takes two arguments, which are the GCNO and GCDA filenames
- Files are listed at the top of output, appended by line 0
- Stripped strings of trailing \0s
- Removed last two lines of whitespace in output
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193148 91177308-0d34-0410-b5e6-96231b3b80d8
collectLineCounts() should only organize the output data. This is done in
anticipation of subsequent changes which will pass in GCNO and GCDA filenames
into the print function where it is printed similar to the gcov output.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193134 91177308-0d34-0410-b5e6-96231b3b80d8
template_value are updated to use DIRef.
A paired commit at clang is required due to changes to DIBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192320 91177308-0d34-0410-b5e6-96231b3b80d8
Bitcasting everything to i8* won't work. Autoupgrade the old
intrinsic declarations to use the new mangling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192117 91177308-0d34-0410-b5e6-96231b3b80d8
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192018 91177308-0d34-0410-b5e6-96231b3b80d8
on platforms with relocations in debug info and also temporarily
revert r191800 due to conflicts with the revert of r191792.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191967 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for some ARM intrinsics such as VCVTN which does a <4 x float> <-> <4 x half> conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191870 91177308-0d34-0410-b5e6-96231b3b80d8
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191800 91177308-0d34-0410-b5e6-96231b3b80d8
Currently it will insert an illegal bitcast.
Arguably, the address space argument should be
added for the creation case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191702 91177308-0d34-0410-b5e6-96231b3b80d8
