The loop vectorizer preserves wrapping, exact, and fast-math properties of scalar instructions.
This patch adds a convenience method to make that operation easier because we need to do this
in the loop vectorizer, SLP vectorizer, and possibly other places.
Although this is a 'no functional change' patch, I've added a testcase to verify that the exact
flag is preserved by the loop vectorizer. The wrapping and fast-math flags are already checked
in existing testcases.
Differential Revision: http://reviews.llvm.org/D5138
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216886 91177308-0d34-0410-b5e6-96231b3b80d8
chain became completely broken here as *all* intrinsic users ended up
being skipped, and the ones that seemed to be singled out were actually
the exact wrong set.
This is a great example of why long else-if chains can be easily
confusing. Switch the entire code to use early exits and early continues
to have simpler (and more importantly, correct) logic here, as well as
fixing the reversed logic for detecting and continuing on lifetime
intrinsics.
I've also significantly cleaned up the test case and added another test
case demonstrating an example where the optimization is not (trivially)
safe to perform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216871 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the hint mechanism relied on clean up passes to remove redundant
metadata, which still showed up if running opt at low levels of optimization.
That also has shown that multiple nodes of the same type, but with different
values could still coexist, even if temporary, and cause confusion if the
next pass got the wrong value.
This patch makes sure that, if metadata already exists in a loop, the hint
mechanism will never append a new node, but always replace the existing one.
It also enhances the algorithm to cope with more metadata types in the future
by just adding a new type, not a lot of code.
Re-applying again due to MSVC 2013 being minimum requirement, and this patch
having C++11 that MSVC 2012 didn't support.
Fixes PR20655.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216870 91177308-0d34-0410-b5e6-96231b3b80d8
This feeds AA through the IFI structure into the inliner so that
AddAliasScopeMetadata can use AA->getModRefBehavior to figure out which
functions only access their arguments (instead of just hard-coding some
knowledge of memory intrinsics). Most of the information is only available from
BasicAA; this is important for preserving alias scoping information for
target-specific intrinsics when doing the noalias parameter attribute to
metadata conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216866 91177308-0d34-0410-b5e6-96231b3b80d8
I thought that I had fixed this problem in r216818, but I did not do a very
good job. The underlying issue is that when we add alias.scope metadata we are
asserting that this metadata completely describes the aliasing relationships
within the current aliasing scope domain, and so in the context of translating
noalias argument attributes, the pointers must all be based on noalias
arguments (as underlying objects) and have no other kind of underlying object.
In r216818 excluding appropriate accesses from getting alias.scope metadata is
done by looking for underlying objects that are not identified function-local
objects -- but that's wrong because allocas, etc. are also function-local
objects and we need to explicitly check that all underlying objects are the
noalias arguments for which we're adding metadata aliasing scopes.
This fixes the underlying-object check for adding alias.scope metadata, and
does some refactoring of the related capture-checking eligibility logic (and
adds more comments; hopefully making everything a bit clearer).
Fixes self-hosting on x86_64 with -mllvm -enable-noalias-to-md-conversion (the
feature is still disabled by default).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216863 91177308-0d34-0410-b5e6-96231b3b80d8
The previous implementation of AddAliasScopeMetadata, which adds noalias
metadata to preserve noalias parameter attribute information when inlining had
a flaw: it would add alias.scope metadata to accesses which might have been
derived from pointers other than noalias function parameters. This was
incorrect because even some access known not to alias with all noalias function
parameters could easily alias with an access derived from some other pointer.
Instead, when deriving from some unknown pointer, we cannot add alias.scope
metadata at all. This fixes a miscompile of the test-suite's tramp3d-v4.
Furthermore, we cannot add alias.scope to functions unless we know they
access only argument-derived pointers (currently, we know this only for
memory intrinsics).
Also, we fix a theoretical problem with using the NoCapture attribute to skip
the capture check. This is incorrect (as explained in the comment added), but
would not matter in any code generated by Clang because we get only inferred
nocapture attributes in Clang-generated IR.
This functionality is not yet enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216818 91177308-0d34-0410-b5e6-96231b3b80d8
consider: (and (icmp X, Y), (and Z, (icmp A, B)))
It may be possible to combine (icmp X, Y) with (icmp A, B).
If we successfully combine, create an 'and' instruction with Z.
This fixes PR20814.
N.B. There is room for improvement after this change but I'm not
convinced it's worth chasing yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216814 91177308-0d34-0410-b5e6-96231b3b80d8
Don't promote byval pointer arguments when when their size in bits is
not equal to their alloc size in bits. This can happen for x86_fp80,
where the size in bits is 80 but the alloca size in bits in 128.
Promoting these types can break passing unions of x86_fp80s and other
types.
Patch by Thomas Jablin!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216693 91177308-0d34-0410-b5e6-96231b3b80d8
InstSimplify already handles icmp (X+Y), X (and things like it)
appropriately. The first thing that InstCombine does is run
InstSimplify on the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216659 91177308-0d34-0410-b5e6-96231b3b80d8
For a detailed description of the problem see the comment in the test file.
The problematic moveBefore() calls are not required anymore because the new
scheduling algorithm ensures a correct ordering anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216656 91177308-0d34-0410-b5e6-96231b3b80d8
Several combines involving icmp (shl C2, %X) C1 can be simplified
without introducing any new instructions. Move them to InstSimplify;
while we are at it, make them more powerful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216642 91177308-0d34-0410-b5e6-96231b3b80d8
We try to perform this transform in InstSimplify but we aren't always
able to. Sometimes, we need to insert a bitcast if X and Y don't have
the same time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216598 91177308-0d34-0410-b5e6-96231b3b80d8
We supported transforming:
(gep i8* X, -(ptrtoint Y))
to:
(inttoptr (sub (ptrtoint X), (ptrtoint Y)))
However, this only fired if 'X' had type i8*. Generalize this to
support various types of different sizes. This results in much better
CodeGen, especially for pointers to packed structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216523 91177308-0d34-0410-b5e6-96231b3b80d8
(X >> Z) & (Y >> Z) -> (X&Y) >> Z for all shifts.
(X >> Z) | (Y >> Z) -> (X|Y) >> Z for all shifts.
(X >> Z) ^ (Y >> Z) -> (X^Y) >> Z for all shifts.
These patterns were previously handled separately in visitAnd()/visitOr()/visitXor().
Differential Revision: http://reviews.llvm.org/D4951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216443 91177308-0d34-0410-b5e6-96231b3b80d8
Adding, removing, or changing non-pack parameters can change the ABI
classification of pack parameters. Clang and other frontends encode the
classification in the IR of the call site, but the callee side
determines it dynamically based on the number of registers consumed so
far. Changing the prototype affects the number of registers consumed
would break such code.
Dead argument elimination performs a similar task and already has a
similar check to avoid this problem.
Patch by Thomas Jablin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216421 91177308-0d34-0410-b5e6-96231b3b80d8
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216393 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalDCE deletes global vars and updates their initializers to nullptr
while leaving underlying constants to be cleaned up later by its uses.
The clean up may never happen, fix this by forcing it every time it's
safe to destroy constants.
Final patch by Rafael Espindola
http://reviews.llvm.org/D4931
<rdar://problem/17523868>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216390 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support to recognize division by uniform power of 2 and modifies the cost table to vectorize division by uniform power of 2 whenever possible.
Updates Cost model for Loop and SLP Vectorizer.The cost table is currently only updated for X86 backend.
Thanks to Hal, Andrea, Sanjay for the review. (http://reviews.llvm.org/D4971)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216371 91177308-0d34-0410-b5e6-96231b3b80d8
CFE, with -03, would turn:
bool f(unsigned x) {
bool a = x & 1;
bool b = x & 2;
return a | b;
}
into:
%1 = lshr i32 %x, 1
%2 = or i32 %1, %x
%3 = and i32 %2, 1
%4 = icmp ne i32 %3, 0
This sort of thing exposes a nasty pathology in GCC, ICC and LLVM.
Instead, we would rather want:
%1 = and i32 %x, 3
%2 = icmp ne i32 %1, 0
Things get a bit more interesting in the following case:
%1 = lshr i32 %x, %y
%2 = or i32 %1, %x
%3 = and i32 %2, 1
%4 = icmp ne i32 %3, 0
Replacing it with the following sequence is better:
%1 = shl nuw i32 1, %y
%2 = or i32 %1, 1
%3 = and i32 %2, %x
%4 = icmp ne i32 %3, 0
This sequence is preferable because %1 doesn't involve %x and could
potentially be hoisted out of loops if it is invariant; only perform
this transform in the non-constant case if we know we won't increase
register pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216343 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR20425.
During slice building, if all of the incoming values of a PHI node are the same, replace the PHI node with the common value. This simplification makes alloca's used by PHI nodes easier to promote.
Test Plan: Added three more tests in phi-and-select.ll
Reviewers: nlewycky, eliben, meheff, chandlerc
Reviewed By: chandlerc
Subscribers: zinovy.nis, hfinkel, baldrick, llvm-commits
Differential Revision: http://reviews.llvm.org/D4659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216299 91177308-0d34-0410-b5e6-96231b3b80d8
Consider:
%add = add nuw i32 %a, -16777216
%and = and i32 %add, 255
Regardless of whether or not we demand the sign bit of %add, we cannot
replace -16777216 with 2130706432 without also removing 'nuw' from the
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216273 91177308-0d34-0410-b5e6-96231b3b80d8
Consider:
%add = add nsw i32 %a, -16777216
%and = and i32 %add, 255
Regardless of whether or not we demand the sign bit of %add, we cannot
replace -16777216 with 2130706432 without also removing 'nsw' from the
instruction.
This fixes PR20377.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216261 91177308-0d34-0410-b5e6-96231b3b80d8
In unreachable blocks it's legal to have instructions like "%x = op %x".
Such instuctions are not schedulable. Therefore the SLPVectorizer has to check for
unreachable blocks and ignore them.
Fixes bug 20646.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216256 91177308-0d34-0410-b5e6-96231b3b80d8
We now use a std::vector instead of a DenseSet to store the list of
label checks so that we can iterate over it deterministically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216255 91177308-0d34-0410-b5e6-96231b3b80d8
In this case, we are creating an x86_fp80 slice for a union from C where
the padding bytes may contain real data. An x86_fp80 alloca is 16 bytes,
and that's just fine. We can't, however, use regular loads and stores to
access the slice, because the store size is only 10 bytes / 80 bits.
Instead, use memcpy and memset.
Fixes PR18726.
Reviewed By: chandlerc
Differential Revision: http://reviews.llvm.org/D5012
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216248 91177308-0d34-0410-b5e6-96231b3b80d8
Somewhat unnoticed in the original implementation of discriminators, but
it could cause instructions to end up in new, small,
DW_TAG_lexical_blocks due to the use of DILexicalBlock to track
discriminator changes.
Instead, use DILexicalBlockFile which we already use to track file
changes without introducing new scopes, so it works well to track
discriminator changes in the same way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216239 91177308-0d34-0410-b5e6-96231b3b80d8
Currently only "add nsw" are widened. This patch eliminates tons of "sext" instructions for 64 bit code (and the corresponding target code) in cases like:
int N = 100;
float **A;
void foo(int x0, int x1)
{
float * A_cur = &A[0][0];
float * A_next = &A[1][0];
for(int x = x0; x < x1; ++x).
{
// Currently only [x+N] case is widened. Others 2 cases lead to sext.
// This patch fixes it, so all 3 cases do not need sext.
const float div = A_cur[x + N] + A_cur[x - N] + A_cur[x * N];
A_next[x] = div;
}
}
...
> clang++ test.cpp -march=core-avx2 -Ofast -fno-unroll-loops -fno-tree-vectorize -S -o -
Differential Revision: http://reviews.llvm.org/D4695
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216160 91177308-0d34-0410-b5e6-96231b3b80d8
