Allow the "SplitCriticalEdge" function to split the edge to a landing pad. If
the pass is *sure* that it thinks it knows what it's doing, then it may go ahead
and specify that the landing pad can have its critical edge split. The loop
unswitch pass is one of these passes. It will split the critical edges of all
edges coming from a loop to a landing pad not within the loop. Doing so will
retain important loop analysis information, such as loop simplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155817 91177308-0d34-0410-b5e6-96231b3b80d8
This way we can enable the POD-like class optimization for a lot more classes,
saving ~120k of code in clang/i386/Release+Asserts when selfhosting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155761 91177308-0d34-0410-b5e6-96231b3b80d8
- FlatArrayMap. Very simple map container that uses flat array inside.
- MultiImplMap. Map container interface, that has two modes, one for small amount of elements and one for big amount.
- SmallMap. SmallMap is DenseMap compatible MultiImplMap. It uses FlatArrayMap for small mode, and DenseMap for big mode.
Also added unittests for new classes and update for ProgrammersManual.
For more details about new classes see ProgrammersManual and comments in sourcecode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155557 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction match is found, but the subtarget features it
requires are not available (missing floating point unit, or thumb vs arm
mode, for example), issue a diagnostic that identifies what the feature
mismatch is.
rdar://11257547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155499 91177308-0d34-0410-b5e6-96231b3b80d8
Strategy.
0. Implement new classes. Classes doesn't affect anything. They still work with ConstantInt base values at this stage.
1. Fictitious replacement of current ConstantInt case values with ConstantRangesSet. Case ranges set will still hold single value, and ConstantInt *getCaseValue() will return it. But additionally implement new method in SwitchInst that allows to work with case ranges. Currenly I think it should be some wrapper that returns either single value or ConstantRangesSet object.
2. Step-by-step replacement of old "ConstantInt* getCaseValue()" with new alternative. Modify algorithms for all passes that works with SwitchInst. But don't modify LLParser and BitcodeReader/Writer. Still hold single value in each ConstantRangesSet object. On this stage some parts of LLVM will use old-style methods, and some ones new-style.
3. After all getCaseValue() usages will removed and whole LLVM and its clients will work in new style - modify LLParser, Reader and Writer. Remove getCaseValue().
4. Replace ConstantInt*-based case ranges set items with APInt ones.
Currently we are on Zero Stage: New classes.
ConstantRangesSet.
I selected ConstantArrays as case ranges set "holder" object (it is a temporary decision, I'll explain why below). The array items are may be ConstantVectors with single item, and ConstantVectors with two items (that means single number and range respectively).
The ConstantInt will used as basic value representation. It will replaced with APInt then. Of course ConstantArray and ConstantVector will go away after ConstantInt => APInt replacement.
New class mandatory features:
- bool isSatisfies(ConstantInt *V) method (need better name?). Returns true if the given value satisfies this case.
- Case's ranges and values enumeration. In some passes we need to analize each case (SwitchLowering for example).
Factory + unified clusterify.
I also propose to implement the factory that allows to build case object with user friendly way. I called it CRSBuilder by now.
Currenly I implemented the factory that allows add,remove pairs of range+successor. It also allows add existing ConstantRangesSet decompiling it to separated ranges. Factory can emit either clusters set (single case range + successor) or the set of "ConstantRangesSet + Successor" pairs.
So you can use it either as builder for new cases set for SwitchInst, or for clusterification of existing cases set.
Just call Factory.optimize() and it emits optimized and sorted clusters collection for you!
I tested clusterification on SelectionDAGBuilder - it works fine. Don't worry it was not included in this patch. Just new classes.
Factory is a template. There are two params: SuccessorClass and IsReadonly. So you can specify what successor you need (BB or MBB). And you can also restrict your factory to use values in read-only mode (SelectionDAGBuilder need IsReadonly=true). Read-only factory couldn't build the cases ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155464 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG builder is a convenient place to do it. Hopefully this is more
efficient than a separate traversal over the same region.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155456 91177308-0d34-0410-b5e6-96231b3b80d8
on X86 Atom. Some of our tests failed because the tail merging part of
the BranchFolding pass was creating new basic blocks which did not
contain live-in information. When the anti-dependency code in the Post-RA
scheduler ran, it would sometimes rename the register containing
the function return value because the fact that the return value was
live-in to the subsequent block had been lost. To fix this, it is necessary
to run the RegisterScavenging code in the BranchFolding pass.
This patch makes sure that the register scavenging code is invoked
in the X86 subtarget only when post-RA scheduling is being done.
Post RA scheduling in the X86 subtarget is only done for Atom.
This patch adds a new function to the TargetRegisterClass to control
whether or not live-ins should be preserved during branch folding.
This is necessary in order for the anti-dependency optimizations done
during the PostRASchedulerList pass to work properly when doing
Post-RA scheduling for the X86 in general and for the Intel Atom in particular.
The patch adds and invokes the new function trackLivenessAfterRegAlloc()
instead of using the existing requiresRegisterScavenging().
It changes BranchFolding.cpp to call trackLivenessAfterRegAlloc() instead of
requiresRegisterScavenging(). It changes the all the targets that
implemented requiresRegisterScavenging() to also implement
trackLivenessAfterRegAlloc().
It adds an assertion in the Post RA scheduler to make sure that post RA
liveness information is available when it is needed.
It changes the X86 break-anti-dependencies test to use –mcpu=atom, in order
to avoid running into the added assertion.
Finally, this patch restores the use of anti-dependency checking
(which was turned off temporarily for the 3.1 release) for
Intel Atom in the Post RA scheduler.
Patch by Andy Zhang!
Thanks to Jakob and Anton for their reviews.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155395 91177308-0d34-0410-b5e6-96231b3b80d8
test suite failures. The failures occur at each stage, and only get
worse, so I'm reverting all of them.
Please resubmit these patches, one at a time, after verifying that the
regression test suite passes. Never submit a patch without running the
regression test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155372 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that the struct file_status on UNIX systems has two
members called st_dev and st_ino; those are also members of the
struct stat, and they are reserved identifiers which can also be
provided as #define (and this is the case for st_dev on Hurd).
The solution (attached) is to rename them, for example adding a
"fs_" prefix (= file status) to them.
Patch by Pino Toscano
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155354 91177308-0d34-0410-b5e6-96231b3b80d8
It set NumLowBitAvailable = 3 which may not be true on all platforms. We only
ever use 2 bits (the default) so this assumption can be safely removed
Should fix PR12612.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155288 91177308-0d34-0410-b5e6-96231b3b80d8
Now that multiple DAGUpdateListeners can be active at the same time,
ISelPosition can become a local variable in DoInstructionSelection.
We simply register an ISelUpdater with CurDAG while ISelPosition exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155249 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of passing listener pointers to RAUW, let SelectionDAG itself
keep a linked list of interested listeners.
This makes it possible to have multiple listeners active at once, like
RAUWUpdateListener was already doing. It also makes it possible to
register listeners up the call stack without controlling all RAUW calls
below.
DAGUpdateListener uses an RAII pattern to add itself to the SelectionDAG
list of active listeners.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155248 91177308-0d34-0410-b5e6-96231b3b80d8
This nicely handles the most common case of virtual register sets, but
also handles anticipated cases where we will map pointers to IDs.
The goal is not to develop a completely generic SparseSet
template. Instead we want to handle the expected uses within llvm
without any template antics in the client code. I'm adding a bit of
template nastiness here, and some assumption about expected usage in
order to make the client code very clean.
The expected common uses cases I'm designing for:
- integer keys that need to be reindexed, and may map to additional
data
- densely numbered objects where we want pointer keys because no
number->object map exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155227 91177308-0d34-0410-b5e6-96231b3b80d8
Assembly matchers for instructions with a two-operand form. ARM is full
of these, for example:
add {Rd}, Rn, Rm // Rd is optional and is the same as Rn if omitted.
The property TwoOperandAliasConstraint on the instruction definition controls
when, and if, an alias will be formed. No explicit InstAlias definitions
are required.
rdar://11255754
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155172 91177308-0d34-0410-b5e6-96231b3b80d8
commits have had several major issues pointed out in review, and those
issues are not being addressed in a timely fashion. Furthermore, this
was all committed leading up to the v3.1 branch, and we don't need piles
of code with outstanding issues in the branch.
It is possible that not all of these commits were necessary to revert to
get us back to a green state, but I'm going to let the Hexagon
maintainer sort that out. They can recommit, in order, after addressing
the feedback.
Reverted commits, with some notes:
Primary commit r154616: HexagonPacketizer
- There are lots of review comments here. This is the primary reason
for reverting. In particular, it introduced large amount of warnings
due to a bad construct in tablegen.
- Follow-up commits that should be folded back into this when
reposting:
- r154622: CMake fixes
- r154660: Fix numerous build warnings in release builds.
- Please don't resubmit this until the three commits above are
included, and the issues in review addressed.
Primary commit r154695: Pass to replace transfer/copy ...
- Reverted to minimize merge conflicts. I'm not aware of specific
issues with this patch.
Primary commit r154703: New Value Jump.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154703: Remove iostream usage
- r154758: Fix CMake builds
- r154759: Fix build warnings in release builds
- Please incorporate these fixes and and review feedback before
resubmitting.
Primary commit r154829: Hexagon V5 (floating point) support.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154841: Remove unused variable (fixing build warnings)
There are also accompanying Clang commits that will be reverted for
consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155047 91177308-0d34-0410-b5e6-96231b3b80d8
DenseMap's hash function uses slightly more entropy and reduces hash collisions
significantly. I also experimented with Hashing.h, but it didn't gave a lot of
improvement while being much more expensive to compute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154996 91177308-0d34-0410-b5e6-96231b3b80d8
