The current DAG combine turns a sequence of extracts from <4 x i32> followed by zexts into a store followed by scalar loads.
According to measurements by Martin Krastev (see PR 21269) for x86-64, a sequence of an extract, movs and shifts gives better performance. However, for 32-bit x86, the previous sequence still seems better.
Differential Revision: http://reviews.llvm.org/D6501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223360 91177308-0d34-0410-b5e6-96231b3b80d8
Replaced some logic that checked if a build_vector node is doing a splat of a
non-undef value with a call to method BuildVectorSDNode::getSplatValue().
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223354 91177308-0d34-0410-b5e6-96231b3b80d8
According to a previous FIXME comment we now not only look at MBB
successors, but also handle code sinking past them:
x = computation
if () {} else {}
use x
The instruction could be sunk over the whole diamond for the
if/then/else (or loop, etc), allowing it to be sunk into other blocks
after that.
Modified test added in r204522, due to one spill less present.
Minor fixes in comments.
Patch provided by Jonas Paulsson. Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223350 91177308-0d34-0410-b5e6-96231b3b80d8
Added instcombine optimizations for BSWAP with AND/OR/XOR ops:
OP( BSWAP(x), BSWAP(y) ) -> BSWAP( OP(x, y) )
OP( BSWAP(x), CONSTANT ) -> BSWAP( OP(x, BSWAP(CONSTANT) ) )
Since its just a one liner, I've also added BSWAP to the DAGCombiner equivalent as well:
fold (OP (bswap x), (bswap y)) -> (bswap (OP x, y))
Refactored bswap-fold tests to use FileCheck instead of just checking that the bswaps had gone.
Differential Revision: http://reviews.llvm.org/D6407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223349 91177308-0d34-0410-b5e6-96231b3b80d8
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223348 91177308-0d34-0410-b5e6-96231b3b80d8
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223347 91177308-0d34-0410-b5e6-96231b3b80d8
Commit on
- This patch fixes the bug described in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-May/062343.html
The fix allocates an extra slot just below the GPRs and stores the base pointer
there. This is done only for functions containing llvm.eh.sjlj.setjmp that also
need a base pointer. Because code containing llvm.eh.sjlj.setjmp saves all of
the callee-save GPRs in the prologue, the offset to the extra slot can be
computed before prologue generation runs.
Impact at run-time on affected functions is::
- One extra store in the prologue, The store saves the base pointer.
- One extra load after a llvm.eh.sjlj.setjmp. The load restores the base pointer.
Because the extra slot is just above a gap between frame-pointer-relative and
base-pointer-relative chunks of memory, there is no impact on other offset
calculations other than ensuring there is room for the extra slot.
http://reviews.llvm.org/D6388
Patch by Arch Robison <arch.robison@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223329 91177308-0d34-0410-b5e6-96231b3b80d8
We had mistakenly believed that GCC's 'cc' referred to the entire
condition-code register (cr0 through cr7) -- and implemented this in r205630 to
fix PR19326, but 'cc' is actually an alias only to 'cr0'. This is causing LLVM
to clobber too much with legacy code with inline asm using the 'cc' clobber.
Fixes PR21451.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223328 91177308-0d34-0410-b5e6-96231b3b80d8
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223323 91177308-0d34-0410-b5e6-96231b3b80d8
This is simply a grab bag of unrelated checks:
- A statepoint call can't be marked readonly or readnone
- We don't currently support inline asm or varadic target functions. Both could be supported, but don't currently work.
- I forgot to check that the number of call arguments actually matched the wrapped callee in my previous change. Included here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223322 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, inline asm memory operands might be expanded as 0($r), where $r is
a register containing the address. As a result, this register cannot be r0, and
we need to enforce this register subclass constraint to prevent miscompiling
the code (we'd get this constraint for free with the usual instruction
definitions, but that scheme has no knowledge of how we end up printing inline
asm memory operands, and so here we need to do it 'by hand'). We can accomplish
this within the current address-mode selection framework by introducing an
explicit COPY_TO_REGCLASS node.
Fixes PR21443.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223318 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this commit, physical registers defined implicitly were considered free
right after their definition, i.e.. like dead definitions. Therefore, their uses
had to immediately follow their definitions, otherwise the related register may
be reused to allocate a virtual register.
This commit fixes this assumption by keeping implicit definitions alive until
they are actually used. The downside is that if the implicit definition was dead
(and not marked at such), we block an otherwise available register. This is
however conservatively correct and makes the fast register allocator much more
robust in particular regarding the scheduling of the instructions.
Fixes PR21700.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223317 91177308-0d34-0410-b5e6-96231b3b80d8
The non-opaque part can be structurally uniqued. To keep this to just
a hash lookup, we don't try to unique cyclic types.
Also change the type mapping algorithm to be optimistic about a type
not being recursive and only create a new type when proven to be wrong.
This is not as strong as trying to speculate that we can keep the source
type, but is simpler (no speculation to revert) and more powerfull
than what we had before (we don't copy non-recursive types at least).
I initially wrote this to try to replace the name based type merging.
It is not strong enough to replace it, but is is a useful addition.
With this patch the number of named struct types is a clang lto bootstrap goes
from 49674 to 15986.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223278 91177308-0d34-0410-b5e6-96231b3b80d8
Add checks that the types in a gc.statepoint sequence match the wrapper callee and that relocating a pointer doesn't change it's type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223275 91177308-0d34-0410-b5e6-96231b3b80d8
The recently added documentation for statepoints claimed that we checked the parameters of the various intrinsics for validity. This patch adds the code to actually do so. I also removed a couple of redundant checks for conditions which are checked elsewhere in the Verifier and simplified the logic using the helper functions from Statepoint.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223259 91177308-0d34-0410-b5e6-96231b3b80d8
This pass needs to be run after PrologEpilogInserter, because
that pass may inserter spill code which reads or writes memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223253 91177308-0d34-0410-b5e6-96231b3b80d8
This change makes MemorySanitizer instrumentation a bit more strict
about instructions that have no origin id assigned to them.
This would have caught the bug that was fixed in r222918.
This is re-commit of r222997, reverted in r223211, with 3 more
missing origins added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223236 91177308-0d34-0410-b5e6-96231b3b80d8
Try to convert two compares of a signed range check into a single unsigned compare.
Examples:
(icmp sge x, 0) & (icmp slt x, n) --> icmp ult x, n
(icmp slt x, 0) | (icmp sgt x, n) --> icmp ugt x, n
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223224 91177308-0d34-0410-b5e6-96231b3b80d8
Almost all immediates in PowerPC assembly (both 32-bit and 64-bit) are signed
numbers, and it is important that we print them as such. To make sure that
happens, we change PPCTargetLowering::LowerAsmOperandForConstraint so that it
does all intermediate checks on a signed-extended int64_t value, and then
creates the resulting target constant using MVT::i64. This will ensure that all
negative values are printed as negative values (mirroring what is done in other
backends to achieve the same sign-extension effect).
This came up in the context of inline assembly like this:
"add%I2 %0,%0,%2", ..., "Ir"(-1ll)
where we used to print:
addi 3,3,4294967295
and gcc would print:
addi 3,3,-1
and gas accepts both forms, but our builtin assembler (correctly) does not. Now
we print -1 like gcc does.
While here, I replaced a bunch of custom integer checks with isInt<16> and
friends from MathExtras.h.
Thanks to Paul Hargrove for the bug report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223220 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM understands a -enable-sign-dependent-rounding-fp-math codegen option. When
the user has specified this option, the Tag_ABI_FP_rounding attribute should be
emitted with value 1. This option currently does not appear to disable
transformations and optimizations that assume default floating point rounding
behavior, AFAICT, but the intention should be recorded in the build attributes,
regardless of what the compiler actually does with the intention.
Change-Id: If838578df3dc652b6f2796b8d152545674bcb30e
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223218 91177308-0d34-0410-b5e6-96231b3b80d8
When lazy reading a module, the types used in a function will not be visible to
a TypeFinder until the body is read.
This patch fixes that by asking the module for its identified struct types.
If a materializer is present, the module asks it. If not, it uses a TypeFinder.
This fixes pr21374.
I will be the first to say that this is ugly, but it was the best I could find.
Some of the options I looked at:
* Asking the LLVMContext. This could be made to work for gold, but not currently
for ld64. ld64 will load multiple modules into a single context before merging
them. This causes us to see types from future merges. Unfortunately,
MappedTypes is not just a cache when it comes to opaque types. Once the
mapping has been made, we have to remember it for as long as the key may
be used. This would mean moving MappedTypes to the Linker class and having
to drop the Linker::LinkModules static methods, which are visible from C.
* Adding an option to ignore function bodies in the TypeFinder. This would
fix the PR by picking the worst result. It would work, but unfortunately
we are currently quite dependent on the upfront type merging. I will
try to reduce our dependency, but it is not clear that we will be able
to get rid of it for now.
The only clean solution I could think of is making the Module own the types.
This would have other advantages, but it is a much bigger change. I will
propose it, but it is nice to have this fixed while that is discussed.
With the gold plugin, this patch takes the number of types in the LTO clang
binary from 52817 to 49669.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223215 91177308-0d34-0410-b5e6-96231b3b80d8
Remove an unnecessary `MDNode::replaceAllUsesWith()`. In the preceding
line, `TheLoop->setLoopID()` visits all backedges and sets the new loop
ID. This sufficiently updates the loop metadata.
Metadata RAUW is going away as part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223210 91177308-0d34-0410-b5e6-96231b3b80d8
Select i1 logical ops directly to 64-bit SALU instructions.
Vector i1 values are always really in SGPRs, with each
bit for each item in the wave. This saves about 4 instructions
when and/or/xoring any condition, and also helps write conditions
that need to be passed in vcc.
This should work correctly now that the SGPR live range
fixing pass works. More work is needed to eliminate the VReg_1
pseudo regclass and possibly the entire SILowerI1Copies pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223206 91177308-0d34-0410-b5e6-96231b3b80d8
The loop is over the operands of an instruction, and checks the
register with the sub reg index of the dest register. This probably
meant to be checking the sub reg index of the same operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223205 91177308-0d34-0410-b5e6-96231b3b80d8
