This is a late backend subset of the IR transform added with:
D52439
We can confirm that the conversion to a 'trunc' is correct by running:
$ opt -instcombine -data-layout="e"
(assuming the IR transforms are correct; change "e" to "E" for big-endian)
As discussed in PR39016:
https://bugs.llvm.org/show_bug.cgi?id=39016
...the pattern may emerge during legalization, so that's we are waiting for an
insertelement to become a scalar_to_vector in the pattern matching here.
The DAG allows for fun variations that are not possible in IR. Result types for
extracts and scalar_to_vector don't necessarily match input types, so that means
we have to be a bit more careful in the transform (see code comments).
The tests show that we don't handle cases that require a shift (as we did in the
IR version). I've left that as a potential follow-up because I'm not sure if
that's a real concern at this late stage.
Differential Revision: https://reviews.llvm.org/D53201
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344872 91177308-0d34-0410-b5e6-96231b3b80d8
Using a base address specifier even for a single-element range is a size
win for object files (7 words versus 8 words - more significant savings
if the debug info is compressed (since it's 3 words of uncompressable
reloc + 4 compressable words compared to 6 uncompressable reloc + 2
compressable words) - does trade off executable size increase though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344841 91177308-0d34-0410-b5e6-96231b3b80d8
Putting addresses in the address pool, even with non-fission, can reduce
relocations - reusing the addresses from debug_info and debug_rnglists
(the latter coming soon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344834 91177308-0d34-0410-b5e6-96231b3b80d8
Change of approach, it looks like it's a much better idea to deal with
the vregs that have LLTs and reg classes both properly, than trying to
avoid creating those across all GlobalISel passes and all targets.
The change mostly touches MachineRegisterInfo::constrainRegClass,
which is apparently only used by MachineCSE. The changes are NFC for
any pipeline but one that contains MachineCSE mid-GlobalISel.
NOTE on isCallerPreservedOrConstPhysReg change in MachineCSE:
There is no test covering it as the only way to insert a new pass
(MachineCSE) from a command line I know of is llc's -run-pass option,
which only works with MIR, but MIRParser freezes reserved registers upon
MachineFunctions creation, making it impossible to reproduce the state
that exposes the issue.
Reviwed By: aditya_nandakumar
Differential Revision: https://reviews.llvm.org/D53144
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344822 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Large GEP splitting, introduced in rL332015, uses a `DenseMap<AssertingVH<Value>, ...>`. This causes an assertion to fail (in debug builds) or undefined behaviour to occur (in release builds) when a value is RAUWed.
This manifested itself in the 7zip benchmark from the llvm test suite built on ARM with `-fstrict-vtable-pointers` enabled while RAUWing invariant group launders and splits in CodeGenPrepare.
This patch merges the large offsets of the argument and the result of an invariant.group strip/launder intrinsic before RAUWing.
Reviewers: Prazek, javed.absar, haicheng, efriedma
Reviewed By: Prazek, efriedma
Subscribers: kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344802 91177308-0d34-0410-b5e6-96231b3b80d8
In a loop, create artificial dependences between the source of a
COPY/REG_SEQUENCE to the use in next iteration.
Eg:
SRC ----Data Dep--> COPY
COPY ---Anti Dep--> PHI (implies, to be used in next iteration)
PHI ----Data Dep--> USE
This patches creates
USE ----Artificial Dep---> SRC
This will effectively schedule the COPY late to eliminate additional copies.
Before this patch, the schedule can be
SRC, COPY, USE : The COPY is used in next iteration and it needs to be
preserved.
After this patch, the schedule can be
USE, SRC, COPY : The COPY is used in next iteration and the live interval is
reduced.
Differential Revision: https://reviews.llvm.org/D53303
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344748 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r344575.
Newly introduced test eh-lsda.ll.test fails with use-after-free under
ASAN build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344639 91177308-0d34-0410-b5e6-96231b3b80d8
Add an intrinsic that takes 2 integers and perform saturation addition on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53053
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344629 91177308-0d34-0410-b5e6-96231b3b80d8
Use SrcVT/DestVT types, correct shift type and AND instead of ZERO_EXTEND_IN_REG.
Part of prep work for D52965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344602 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344575 91177308-0d34-0410-b5e6-96231b3b80d8
This is intended to make the backend on par with functionality that was
added to the IR version of SimplifyDemandedVectorElts in:
rL343727
...and the original motivation is that we need to improve demanded-vector-elements
in several ways to avoid problems that would be exposed in D51553.
Differential Revision: https://reviews.llvm.org/D52912
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344541 91177308-0d34-0410-b5e6-96231b3b80d8
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344502 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TwoAddressInstruction pass typically rewrites
%1:short = foo %0.sub_lo:long
as
%1:short = COPY %0.sub_lo:long
%1:short = foo %1:short
when having tied operands.
If there are extra un-tied operands that uses the same reg and
subreg, such as the second and third inputs to fie here:
%1:short = fie %0.sub_lo:long, %0.sub_hi:long, %0.sub_lo:long
then there was a bug which replaced the register %0 also for
the un-tied operand, but without changing the subregister indices.
So we used to get:
%1:short = COPY %0.sub_lo:long
%1:short = fie %1, %1.sub_hi:short, %1.sub_lo:short
With this fix we instead get:
%1:short = COPY %0.sub_lo:long
%1:short = fie %1, %0.sub_hi:long, %1
Reviewers: arsenm, JesperAntonsson, kparzysz, MatzeB
Reviewed By: MatzeB
Subscribers: bjope, kparzysz, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D36224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344492 91177308-0d34-0410-b5e6-96231b3b80d8
The final stage of CTPOP expansion (v = (v * 0x01010101...) >> (Len - 8)) is completely pointless for the byte (Len = 8) case as it reduces to (v = (v * 0x01...) >> 0), but annoyingly this doesn't always get optimized away.
Found while investigating generic vector CTPOP expansion (PR32655).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344477 91177308-0d34-0410-b5e6-96231b3b80d8
The CTPOP case has been changed from VT.getSizeInBits to VT.getScalarSizeInBits - but this fits in with future work for vector support (PR32655) and doesn't affect any current (scalar) uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344461 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
getShiftAmountTy for X86 returns MVT::i8. If a BSWAP or BITREVERSE is created that requires promotion and the difference between the original VT and the promoted VT is more than 255 then we won't able to create the constant.
This patch adds a check to replace the result from getShiftAmountTy to MVT::i32 if the difference won't fit. This should get legalized later when the shift is ultimately expanded since its clearly an illegal type that we're only promoting to make it a power of 2 bit width. Alternatively we could base the decision completely on the largest shift amount the promoted VT could use.
Vectors should be immune here because getShiftAmountTy always returns the incoming VT for vectors. Only the scalar shift amount can be changed by the targets.
Reviewers: eli.friedman, RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53232
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344460 91177308-0d34-0410-b5e6-96231b3b80d8
There is one remnant - AVX1 custom splitting of 256-bit vectors - which is due to a regression where the X86ISD::ANDNP is still performed as a YMM.
I've also tightened the CTLZ or CTPOP lowering in SelectionDAGLegalize::ExpandBitCount to require a legal CTLZ - it doesn't affect existing users and fixes an issue with AVX512 codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344457 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344437 91177308-0d34-0410-b5e6-96231b3b80d8
This is more consistent with what we usually do and matches some code X86 custom emits in some cases that I think I can cleanup.
The MIPS test change just looks to be an instruction ordering change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344422 91177308-0d34-0410-b5e6-96231b3b80d8
The initial patch was not reviewed, and does not have any tests;
it should not have been merged.
This reverts 344395, 344390, 344387, 344385, 344381, 344376,
and 344366.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344405 91177308-0d34-0410-b5e6-96231b3b80d8
This saves a conversion to extracts and build_vector. We already do this when both the result and the input need to be widened to the same type.
This changed the sse-intrinsics-fast-isel test because we don't lower (insert_vector_elt (scalar_to_vector X), Y, 1) well. We turn it into (vector_shuffle (scalar_to_vector X), (scalar_to_vector Y), <0, 4, 2, 3>) losing track of the fact that the upper elts could be undef.
We should probably find a way to prevent the scalarization of the <2 x f32> load on these tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344404 91177308-0d34-0410-b5e6-96231b3b80d8
If the input type is widened as well, but we still were forced to unroll, we shouldn't be considering the widened input element count. We should only create as many scalar operations as the original type called for.
This will be important for an upcoming patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344403 91177308-0d34-0410-b5e6-96231b3b80d8
This a resubmission of a patch which was previously reverted
due to breaking several lld tests. The issues causing those
failures have been fixed, so the patch is now resubmitted.
---Original Commit Message---
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344377 91177308-0d34-0410-b5e6-96231b3b80d8
BTF is the debug format for BPF, a kernel virtual machine
and widely used for tracing, networking and security, etc ([1]).
Currently only instruction streams are passed to kernel,
the kernel verifier verifies them before execution. In order to
provide better visibility of bpf programs to user space
tools, some debug information, e.g., function names and
debug line information are desirable for kernel so tools
can get such information with better annotation
for jited instructions for performance or other reasons.
The dwarf is too complicated in kernel and for BPF.
Hence, BTF is designed to be the debug format for BPF ([2]).
Right now, pahole supports BTF for types, which
are generated based on dwarf sections in the ELF file.
In order to annotate performance metrics for jited bpf insns,
it is necessary to pass debug line info to the kernel.
Furthermore, we want to pass the actual code to the
kernel because of the following reasons:
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
Another consideration is for JIT. The project like bcc
use MCJIT to compile a C program into bpf insns and
load them to the kernel ([3]). The generated BTF sections
will be readily available for such cases as well.
This patch implemented generation of BTF info in llvm
compiler. The BTF related sections will be generated
when both -target bpf and -g are specified. Two sections
are generated:
.BTF contains all the type and string information, and
.BTF.ext contains the func_info and line_info.
The separation is related to how two sections are used
differently in bpf loader, e.g., linux libbpf ([4]).
The .BTF section can be loaded into the kernel directly
while .BTF.ext needs loader manipulation before loading
to the kernel. The format of the each section is roughly
defined in llvm:include/llvm/MC/MCBTFContext.h and
from the implementation in llvm:lib/MC/MCBTFContext.cpp.
A later example also shows the contents in each section.
The type and func_info are gathered during CodeGen/AsmPrinter
by traversing dwarf debug_info. The line_info is
gathered in MCObjectStreamer before writing to
the object file. After all the information is gathered,
the two sections are emitted in MCObjectStreamer::finishImpl.
With cmake CMAKE_BUILD_TYPE=Debug, the compiler can
dump out all the tables except insn offset, which
will be resolved later as relocation records.
The debug type "btf" is used for BTFContext dump.
Dwarf tests the debug info generation with
llvm-dwarfdump to decode the binary sections and
check whether the result is expected. Currently
we do not have such a tool yet. We will implement
btf dump functionality in bpftool ([5]) as the bpftool is
considered the recommended tool for bpf introspection.
The implementation for type and func_info is tested
with linux kernel test cases. The line_info is visually
checked with dump from linux kernel libbpf ([4]) and
checked with readelf dumping section raw data.
Note that the .BTF and .BTF.ext information will not
be emitted to assembly code and there is no assembler
support for BTF either.
In the below, with a clang/llvm built with CMAKE_BUILD_TYPE=Debug,
Each table contents are shown for a simple C program.
-bash-4.2$ cat -n test.c
1 struct A {
2 int a;
3 char b;
4 };
5
6 int test(struct A *t) {
7 return t->a;
8 }
-bash-4.2$ clang -O2 -target bpf -g -mllvm -debug-only=btf -c test.c
Type Table:
[1] FUNC name_off=1 info=0x0c000001 size/type=2
param_type=3
[2] INT name_off=12 info=0x01000000 size/type=4
desc=0x01000020
[3] PTR name_off=0 info=0x02000000 size/type=4
[4] STRUCT name_off=16 info=0x04000002 size/type=8
name_off=18 type=2 bit_offset=0
name_off=20 type=5 bit_offset=32
[5] INT name_off=22 info=0x01000000 size/type=1
desc=0x02000008
String Table:
0 :
1 : test
6 : .text
12 : int
16 : A
18 : a
20 : b
22 : char
27 : test.c
34 : int test(struct A *t) {
58 : return t->a;
FuncInfo Table:
sec_name_off=6
insn_offset=<Omitted> type_id=1
LineInfo Table:
sec_name_off=6
insn_offset=<Omitted> file_name_off=27 line_off=34 line_num=6 column_num=0
insn_offset=<Omitted> file_name_off=27 line_off=58 line_num=7 column_num=3
-bash-4.2$ readelf -S test.o
......
[12] .BTF PROGBITS 0000000000000000 0000028d
00000000000000c1 0000000000000000 0 0 1
[13] .BTF.ext PROGBITS 0000000000000000 0000034e
0000000000000050 0000000000000000 0 0 1
[14] .rel.BTF.ext REL 0000000000000000 00000648
0000000000000030 0000000000000010 16 13 8
......
-bash-4.2$
The latest linux kernel ([6]) can already support .BTF with type information.
The [7] has the reference implementation in linux kernel side
to support .BTF.ext func_info. The .BTF.ext line_info support is not
implemented yet. If you have difficulty accessing [6], you can
manually do the following to access the code:
git clone https://github.com/yonghong-song/bpf-next-linux.git
cd bpf-next-linux
git checkout btf
The change will push to linux kernel soon once this patch is landed.
References:
[1]. https://www.kernel.org/doc/Documentation/networking/filter.txt
[2]. https://lwn.net/Articles/750695/
[3]. https://github.com/iovisor/bcc
[4]. https://github.com/torvalds/linux/tree/master/tools/lib/bpf
[5]. https://github.com/torvalds/linux/tree/master/tools/bpf/bpftool
[6]. https://github.com/torvalds/linux
[7]. https://github.com/yonghong-song/bpf-next-linux/tree/btf
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Differential Revision: https://reviews.llvm.org/D52950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344366 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Reland of
- r344197 "[MC][ELF] compute entity size for explicit sections"
- r344206 "[MC][ELF] Fix section_mergeable_size.ll"
after being reverted in r344278 due to build breakages from not
specifying a target triple.
Move test from test/CodeGen/Generic/ to test/MC/ELF/.
Add explicit target triple so we don't try to run
this test on non ELF targets.
Reported: https://reviews.llvm.org/D53056#1261707
Reviewers: fhahn, rnk, espindola, NoQ
Reviewed By: fhahn, rnk
Subscribers: NoQ, MaskRay, rengolin, emaste, arichardson, llvm-commits, pirama, srhines
Differential Revision: https://reviews.llvm.org/D53146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344360 91177308-0d34-0410-b5e6-96231b3b80d8
Generalize SelectionDAGLegalize's CTLZ expansion to handle vectors - lets VectorLegalizer::ExpandCTLZ to just pass the expansion on instead of repeating the same codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344349 91177308-0d34-0410-b5e6-96231b3b80d8
I want to add another pattern here that includes scalar_to_vector,
so this makes that patch smaller. I was hoping to remove the
hasOneUse() check because it shouldn't be necessary for common
codegen, but an AMDGPU test has a comment suggesting that the
extra check makes things better on one of those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344320 91177308-0d34-0410-b5e6-96231b3b80d8
In future, if we may add any new DAG mutations other than artificial dependencies,
the NodeNum may not be valid. Instead the index from topological schedule DAG can be
used as long as we update it with the DAG change.
Differential Revision: https://reviews.llvm.org/D53104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344283 91177308-0d34-0410-b5e6-96231b3b80d8
This was originally causing some test failures on non-Windows
platforms, which required fixes in the compiler and linker. After
those fixes, however, other tests started failing. Reverting
temporarily until I can address everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344279 91177308-0d34-0410-b5e6-96231b3b80d8
Sanjay Patel