We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293359 91177308-0d34-0410-b5e6-96231b3b80d8
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279698 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274189 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, specifying -post-RA-scheduler=true had the side effect of
disabling the antidependency breaker, yielding different behavior than
if the post-RA-scheduler was enabled via the scheduling model.
Differential Revision: http://reviews.llvm.org/D20186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270077 91177308-0d34-0410-b5e6-96231b3b80d8
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269011 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267022 91177308-0d34-0410-b5e6-96231b3b80d8
MachineFunctionProperties represents a set of properties that a MachineFunction
can have at particular points in time. Existing examples of this idea are
MachineRegisterInfo::isSSA() and MachineRegisterInfo::tracksLiveness() which
will eventually be switched to use this mechanism.
This change introduces the AllVRegsAllocated property; i.e. the property that
all virtual registers have been allocated and there are no VReg operands
left.
With this mechanism, passes can declare that they require a particular property
to be set, or that they set or clear properties by implementing e.g.
MachineFunctionPass::getRequiredProperties(). The MachineFunctionPass base class
verifies that the requirements are met, and handles the setting and clearing
based on the delcarations. Passes can also directly query and update the current
properties of the MF if they want to have conditional behavior.
This change annotates the target-independent post-regalloc passes; future
changes will also annotate target-specific ones.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D18421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264593 91177308-0d34-0410-b5e6-96231b3b80d8
Take parameters as MachineInstr& instead of MachineInstr* in
AntiDepBreaker API, since these are required to be non-null. No
functionality change intended. Looking toward PR26753.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262145 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAGInstrs doesn't behave differently before or after register
allocation. It was only used in a method of MachineSchedulerBase which
behaved differently in MachineScheduler/PostMachineScheduler. Change
this to let MachineScheduler/PostMachineScheduler just pass in a
parameter to that function.
The order of the LiveIntervals* and bool RemoveKillFlags paramters have
been switched to make out-of-tree code fail instead of unintentionally
passing a value intended for the IsPostRA flag to the (previously
following and default initialized) RemoveKillFlags.
Differential Revision: http://reviews.llvm.org/D14245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251883 91177308-0d34-0410-b5e6-96231b3b80d8
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247167 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
r213101 changed the behaviour of this method to not only affect the
PostMachineScheduler scheduler but also the PostRAScheduler scheduler,
renaming should make this fact clear. Also document that the preferred
way is to specify this in the scheduling model instead of overriding
this method.
Differential Revision: http://reviews.llvm.org/D10427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239659 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
Both MachineLoopInfo and MachineDominatorTree may be null in ScheduleDAGMI
constructor call. It is undefined behavior to take references to these values.
This bug is reported by UBSan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216118 91177308-0d34-0410-b5e6-96231b3b80d8
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214838 91177308-0d34-0410-b5e6-96231b3b80d8
Refactoring; no functional changes intended
Removed PostRAScheduler bits from subtargets (X86, ARM).
Added PostRAScheduler bit to MCSchedModel class.
This bit is set by a CPU's scheduling model (if it exists).
Removed enablePostRAScheduler() function from TargetSubtargetInfo and subclasses.
Fixed the existing enablePostMachineScheduler() method to use the MCSchedModel (was just returning false!).
Added methods to TargetSubtargetInfo to allow overrides for AntiDepBreakMode, CriticalPathRCs, and OptLevel for PostRAScheduling.
Added enablePostRAScheduler() function to PostRAScheduler class which queries the subtarget for the above values.
Preserved existing scheduler behavior for ARM, MIPS, PPC, and X86:
a. ARM overrides the CPU's postRA settings by enabling postRA for any non-Thumb or Thumb2 subtarget.
b. MIPS overrides the CPU's postRA settings by enabling postRA for everything.
c. PPC overrides the CPU's postRA settings by enabling postRA for everything.
d. X86 is the only target that actually has postRA specified via sched model info.
Differential Revision: http://reviews.llvm.org/D4217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213101 91177308-0d34-0410-b5e6-96231b3b80d8
define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
This adds two additional functions to the hazard recognizer interface. These
are optional (in the sense that the default implementations preserve the
current behavior), and used by the post-RA scheduler. Upcoming commits will use
this functionality in order to improve dispatch-group formation on the POWER7
and related cores. Dispatch groups are an odd construct: sometimes we need to
insert nops to force a new one to start (for performance reasons), and some
instructions need to appear in certain positions within a group, but the groups
are not fundamentally cycle based (they can contain instructions with data
dependencies with non-trivial latencies).
Motivation:
unsigned PreEmitNoops(SUnit *) - Used to force the post-RA scheduler to insert
nops to force a new dispatch group to begin. We already have a NoopHazard, and
this is also still needed. However, NoopHazard only causes a nop to be inserted
if there are no other available instructions, and so is not always sufficient.
The number of nops to insert depends on state that only the hazard recognizer
has, so a general callback is necessary.
bool ShouldPreferAnother(SUnit *) - Used to avoid scheduling instructions that
would start a new dispatch group when others are available that could be part
of the current dispatch group. In this case, we don't want to issue nops,
because the non-preferred instruction will implicitly start a new dispatch
group regardless.
Although the motivation for these functions is driven by the PowerPC backend,
they are completely general.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197084 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a pathological compile time problem with very large blocks
and lots of scheduling boundaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189116 91177308-0d34-0410-b5e6-96231b3b80d8
Now that return value registers are return instruction uses, there is no
need for special treatment of return blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174416 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
For now be more conservative in case other out-of-tree schedulers rely
on the old behavior of artificial edges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167808 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for weak DAG edges to the general scheduling
infrastructure in preparation for MachineScheduler support for
heuristics based on weak edges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167738 91177308-0d34-0410-b5e6-96231b3b80d8
Using the cached bit vector in MRI avoids comstantly allocating and
recomputing the reserved register bit vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165983 91177308-0d34-0410-b5e6-96231b3b80d8
