Workaround bug where the InstCombine pass was asserting on the IR added in lit
test, where we have a bitcast instruction after a GEP from an addrspace cast.
The second bitcast in the test was getting combined into
`bitcast <16 x i32>* %0 to <16 x i32> addrspace(3)*`, which looks like it should
be an addrspace cast instruction instead. Otherwise if control flow is allowed
to continue as it is now we create a GEP instruction
`<badref> = getelementptr inbounds <16 x i32>, <16 x i32>* %0, i32 0`. However
because the type of this instruction doesn't match the address space we hit an
assert when replacing the bitcast with that GEP.
```
void llvm::Value::doRAUW(llvm::Value*, bool): Assertion `New->getType() == getType() && "replaceAllUses of value with new value of different type!"' failed.
```
Differential Revision: https://reviews.llvm.org/D50058
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338395 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine has a cast transform that matches a cast-of-select:
Orig = cast (Src = select Cond TV FV)
And tries to replace it with a select which has the cast folded in:
NewSel = select Cond (cast TV) (cast FV)
The combiner does RAUW(Orig, NewSel), so any debug values for Orig would
survive the transform. But debug values for Src would be lost.
This patch teaches InstCombine to replace all debug uses of Src with
NewSel (taking care of doing any necessary DIExpression rewriting).
Differential Revision: https://reviews.llvm.org/D49270
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337310 91177308-0d34-0410-b5e6-96231b3b80d8
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336451 91177308-0d34-0410-b5e6-96231b3b80d8
We have bailout hacks based on min/max in various places in instcombine
that shouldn't be necessary. The affected test was added for:
D48930
...which is a consequence of the improvement in:
D48584 (https://reviews.llvm.org/rL336172)
I'm assuming the visitTrunc bailout in this patch was added specifically
to avoid a change from SimplifyDemandedBits, so I'm just moving that
below the EvaluateInDifferentType optimization. A narrow min/max is still
a min/max.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336293 91177308-0d34-0410-b5e6-96231b3b80d8
When zext is EvaluatedInDifferentType, InstCombine
drops the dbg.value intrinsic. This patch tries to
preserve said DI, by inserting the zext's old DI in the
resulting instruction. (Only for integer type for now)
Differential Revision: https://reviews.llvm.org/D48331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336254 91177308-0d34-0410-b5e6-96231b3b80d8
This prevents InstCombine from creating mis-sized dbg.values when
replacing a sequence of casts with a simpler cast. For example, in:
(fptrunc (floor (fpext X))) -> (floorf X)
We no longer emit dbg.value(X) (with a 32-bit float operand) to describe
(fpext X) (which is a 64-bit float).
This was diagnosed by the debugify check added in r335682.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335696 91177308-0d34-0410-b5e6-96231b3b80d8
Add an overload for the common case where the replacement dbg.values
have the same DIExpressions as the originals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335643 91177308-0d34-0410-b5e6-96231b3b80d8
The previous code worked with vectors, but it failed when the
vector constants contained undef elements.
The matchers handle those cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335262 91177308-0d34-0410-b5e6-96231b3b80d8
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335144 91177308-0d34-0410-b5e6-96231b3b80d8
Don't always:
cast (select (cmp x, y), z, C) --> select (cmp x, y), (cast z), C'
This is something that came up as far back as D26556, and I lost track of it.
I suspect that this transform is part of the underlying problem that is
inspiring some of the recent proposals that seek to match larger patterns
that include a cast op. Even if that's not true, this transform causes
problems for codegen (particularly with vector types).
A transform to actively match the size of cmp and select operand sizes should
follow. This patch just removes the harmful canonicalization in the other
direction.
Differential Revision: https://reviews.llvm.org/D47163
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333611 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
The bitwidth of the operation should always be wider than the result width of the truncate since we don't recurse through any width changing operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332055 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331275 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of returning the smaller FP constant we now return the minimal Type the constant can fit into. We also return the Type of the input to any fp extends. The legality checks are then done on just the size of these Types. If we find something profitable we then emit FPTruncs in front of the smaller binop and assume those FPTruncs will be constant folded or combined with any ConstantFPs or fpextends.
Differential Revision: https://reviews.llvm.org/D44038
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326617 91177308-0d34-0410-b5e6-96231b3b80d8
Currently this code's control flow very much assumes that there are no meaningful checks after determining that it's a ConstantFP. So whenever it wants to stop it just does "return V". But V is also the variable name it uses when it wants to return a new value. So 'return V' appears multiple times with different meanings.
This patch just moves all the code into a helper function and returns nullptr when it wants to stop.
I've split this from D43774 while I try to figure out how to best handle the vector case there. But this change by itself at least seemed like a readability improvement.
Differential Revision: https://reviews.llvm.org/D43833
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326361 91177308-0d34-0410-b5e6-96231b3b80d8
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325102 91177308-0d34-0410-b5e6-96231b3b80d8
There was a logic hole in D42739 / rL324014 because we're not accounting for select and phi
instructions that might have repeated operands. This is likely a source of an infinite loop.
I haven't manufactured a test case to prove that, but it should be safe to speculatively limit
this transform to binops while we try to create that test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324252 91177308-0d34-0410-b5e6-96231b3b80d8
This is the enhancement suggested in D42536 to fix a shortcoming in
regular InstCombine's canEvaluate* functionality.
When we have multiple uses of a value, but they're all in one instruction, we can
allow that expression to be narrowed or widened for the same cost as a single-use
value.
AFAICT, this can only matter for multiply: sub/and/or/xor/select would be simplified
away if the operands are the same value; add becomes shl; shifts with a variable shift
amount aren't handled.
Differential Revision: https://reviews.llvm.org/D42739
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324014 91177308-0d34-0410-b5e6-96231b3b80d8
A cast from A to B is eliminable if its result is casted to C, and if
the pair of casts could just be expressed as a single cast. E.g here,
%c1 is eliminable:
%c1 = zext i16 %A to i32
%c2 = sext i32 %c1 to i64
InstCombine optimizes away eliminable casts. This patch teaches it to
insert a dbg.value intrinsic pointing to the final result, so that local
variables pointing to the eliminable result are preserved.
Differential Revision: https://reviews.llvm.org/D42566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323570 91177308-0d34-0410-b5e6-96231b3b80d8
// trunc (binop X, C) --> binop (trunc X, C')
// trunc (binop (ext X), Y) --> binop X, (trunc Y)
I'm grouping sub with the other binops because that makes the code simpler
and the transforms are valid:
https://rise4fun.com/Alive/UeF
...so even though we don't expect a sub with constant Op1 or any of the
other opcodes with constant Op0 due to canonicalization rules, we might as
well handle those situations if non-canonical code somehow reaches this
point (it should just make instcombine more efficient in reaching its
end goal).
This should solve the problem that later manifests in the vectorizers in
PR35295:
https://bugs.llvm.org/show_bug.cgi?id=35295
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318404 91177308-0d34-0410-b5e6-96231b3b80d8
We were using an i1 type and then zero extending to a vector. Instead just create the 0/1 directly as a ConstantInt with the correct type. No need to ask ConstantExpr to zero extend for us.
This bug is a bit tricky to hit because it requires us to visit a zext of an icmp that would normally be simplified to true/false, but that icmp hasnt' been visited yet. In the test case this zext and icmp were created by visiting a udiv and due to worklist ordering we got to the zext first.
Fixes PR34841.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314971 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds splat support to transformZExtICmp. The test cases are vector versions of tests that failed when commenting out parts of the existing scalar code.
One test didn't vectorize optimize properly due to another bug so a TODO has been added.
Differential Revision: https://reviews.llvm.org/D37253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312023 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the bitsToClear from the LHS of an 'and' comes back non-zero, but all of those bits are known zero on the RHS, we can reset bitsToClear.
Without this, the 'or' in the modified test case blocks the transform because it has non-zero bits in its RHS in those bits.
Reviewers: spatel, majnemer, davide
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36944
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311343 91177308-0d34-0410-b5e6-96231b3b80d8
I couldn't find any smaller folds to help the cases in:
https://bugs.llvm.org/show_bug.cgi?id=34046
after:
rL310141
The truncated rotate-by-variable patterns elude all of the existing transforms because
of multiple uses and knowledge about demanded bits and knownbits that doesn't exist
without the whole pattern. So we need an unfortunately large pattern match. But by
simplifying this pattern in IR, the backend is already able to generate
rolb/rolw/rorb/rorw for x86 using its existing rotate matching logic (although
there is a likely extraneous 'and' of the rotate amount).
Note that rotate-by-constant doesn't have this problem - smaller folds should already
produce the narrow IR ops.
Differential Revision: https://reviews.llvm.org/D36395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310509 91177308-0d34-0410-b5e6-96231b3b80d8
In addition to moving the shift transforms over, we may want to
detect too-wide rotate patterns here (PR34046).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310181 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the InstCombiner class contained a pointer to an IR builder that had been passed to the constructor. Sometimes this would be passed to helper functions as either a pointer or the pointer would be dereferenced to be passed by reference.
This patch makes it a reference everywhere including the InstCombiner class itself so there is more inconsistency. This a large, but mechanical patch. I've done very minimal formatting changes on it despite what clang-format wanted to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307451 91177308-0d34-0410-b5e6-96231b3b80d8
There are 2 parts to this patch made simultaneously to avoid a regression.
We're reversing the canonicalization that moves bitwise vector ops before bitcasts.
We're moving bitwise vector ops *after* bitcasts instead. That's the 1st and 3rd hunks
of the patch. The motivation is that there's only one fold that currently depends on
the existing canonicalization (see next), but there are many folds that would
automatically benefit from the new canonicalization.
PR33138 ( https://bugs.llvm.org/show_bug.cgi?id=33138 ) shows why/how we have these
patterns in IR.
There's an or(and,andn) pattern that requires an adjustment in order to continue matching
to 'select' because the bitcast changes position. This match is unfortunately complicated
because it requires 4 logic ops with optional bitcast and sext ops.
Test diffs:
1. The bitcast.ll and bitcast-bigendian.ll changes show the most basic difference -
bitcast comes before logic.
2. There are also tests with no diffs in bitcast.ll that verify that we're still doing
folds that were enabled by the previous canonicalization.
3. icmp-xor-signbit.ll shows the payoff. We don't need to adjust existing icmp patterns
to look through bitcasts.
4. logical-select.ll contains several tests for the or(and,andn) --> select fold to
verify that we are still handling those cases. The lone diff shows the movement of
the bitcast from the new canonicalization rule.
Differential Revision: https://reviews.llvm.org/D33517
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306011 91177308-0d34-0410-b5e6-96231b3b80d8
These methods are specifically optimized to only counting leading zeros without an additional uint64_t compare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304876 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise we end up miscompiling, transforming:
define i8 @tinky() {
%sext = sext i1 1 to i16
%hibit = lshr i16 %sext, 15
%tr = trunc i16 %hibit to i8
ret i8 %tr
}
into:
%sext = sext i1 1 to i8
ret i8 %sext
and the first get folded to ret i8 1, while the second gets folded
to ret i8 -1.
Eventually we should get rid of this transform entirely, but for now,
this at least fixes a know correctness bug.
Differential Revision: https://reviews.llvm.org/D33338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303513 91177308-0d34-0410-b5e6-96231b3b80d8
Cameron McInally