My original support for the general dynamic and local dynamic TLS
models contained some fairly obtuse hacks to generate calls to
__tls_get_addr when lowering a TargetGlobalAddress. Rather than
generating real calls, special GET_TLS_ADDR nodes were used to wrap
the calls and only reveal them at assembly time. I attempted to
provide correct parameter and return values by chaining CopyToReg and
CopyFromReg nodes onto the GET_TLS_ADDR nodes, but this was also not
fully correct. Problems were seen with two back-to-back stores to TLS
variables, where the call sequences ended up overlapping with unhappy
results. Additionally, since these weren't real calls, the proper
register side effects of a call were not recorded, so clobbered values
were kept live across the calls.
The proper thing to do is to lower these into calls in the first
place. This is relatively straightforward; see the changes to
PPCTargetLowering::LowerGlobalTLSAddress() in PPCISelLowering.cpp.
The changes here are standard call lowering, except that we need to
track the fact that these calls will require a relocation. This is
done by adding a machine operand flag of MO_TLSLD or MO_TLSGD to the
TargetGlobalAddress operand that appears earlier in the sequence.
The calls to LowerCallTo() eventually find their way to
LowerCall_64SVR4() or LowerCall_32SVR4(), which call FinishCall(),
which calls PrepareCall(). In PrepareCall(), we detect the calls to
__tls_get_addr and immediately snag the TargetGlobalTLSAddress with
the annotated relocation information. This becomes an extra operand
on the call following the callee, which is expected for nodes of type
tlscall. We change the call opcode to CALL_TLS for this case. Back
in FinishCall(), we change it again to CALL_NOP_TLS for 64-bit only,
since we require a TOC-restore nop following the call for the 64-bit
ABIs.
During selection, patterns in PPCInstrInfo.td and PPCInstr64Bit.td
convert the CALL_TLS nodes into BL_TLS nodes, and convert the
CALL_NOP_TLS nodes into BL8_NOP_TLS nodes. This replaces the code
removed from PPCAsmPrinter.cpp, as the BL_TLS or BL8_NOP_TLS
nodes can now be emitted normally using their patterns and the
associated printTLSCall print method.
Finally, as a result of these changes, all references to get-tls-addr
in its various guises are no longer used, so they have been removed.
There are existing TLS tests to verify the changes haven't messed
anything up). I've added one new test that verifies that the problem
with the original code has been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221703 91177308-0d34-0410-b5e6-96231b3b80d8
The ISel lowering for global TLS access in PIC mode was creating a pseudo
instruction that is later expanded to a call, but the code was not
setting the hasCalls flag in the MachineFrameInfo alongside the adjustsStack
flag. This caused some functions to be mistakenly recognized as leaf functions,
and this in turn affected the decision to eliminate the frame pointer.
With the fix, hasCalls is properly set and the leaf frame pointer is correctly
preserved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221695 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM replaces the SelectionDAG pattern (xor (set_cc cc x y) 1) with
(set_cc !cc x y), which is only correct when the xor has type i1.
Instead, we should check that the constant operand to the xor is all
ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221693 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch enables code generation for the MIPS II target. Pre-Mips32
targets don't have the MUL instruction, so we add the correspondent
pattern that uses the MULT/MFLO combination in order to retrieve the
product.
This is WIP as we don't support code generation for select nodes due to
the lack of conditional-move instructions.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6150
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221686 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical name when printing assembly is still $29. The reason is that
GAS does not accept "$hwr_ulr" at the moment.
This addresses the comments from r221307, which reverted the original
commit r221299.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221685 91177308-0d34-0410-b5e6-96231b3b80d8
The original commit r221299 was reverted in r221307. I removed the name
"hrw_ulr" ($29) from the original commit because two tests were failing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221681 91177308-0d34-0410-b5e6-96231b3b80d8
Referencing one symbol from another in the same section does not
generally require a relocation. However, the MS linker has a feature
called /INCREMENTAL which enables incremental links. It achieves this
by creating thunks to the actual function and redirecting all
relocations to point to the thunk.
This breaks down with the old scheme if you have a function which
references, say, itself. On x86_64, we would use %rip relative
addressing to reference the start of the function from out current
position. This would lead to miscompiles because other references might
reference the thunk instead, breaking function pointer equality.
This fixes PR21520.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221678 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue with matching trunc -> assertsext -> zext on x86-64, which would not zero the high 32-bits. See PR20494 for details.
Recommitting - This time, with a hopefully working test.
Differential Revision: http://reviews.llvm.org/D6128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221672 91177308-0d34-0410-b5e6-96231b3b80d8
This adds const to a few methods that already return const references or
creates a const version when they reterun non-const references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221666 91177308-0d34-0410-b5e6-96231b3b80d8
AVX2 is available.
According to IACA, the new lowering has a throughput of 8 cycles instead of 13
with the previous one.
Althought this lowering kicks in some SPECs benchmarks, the performance
improvement was within the noise.
Correctness testing has been done for the whole range of uint32_t with the
following program:
uint4 v = (uint4) {0,1,2,3};
uint32_t i;
//Check correctness over entire range for uint4 -> float4 conversion
for( i = 0; i < 1U << (32-2); i++ )
{
float4 t = test(v);
float4 c = correct(v);
if( 0xf != _mm_movemask_ps( t == c ))
{
printf( "Error @ %vx: %vf vs. %vf\n", v, c, t);
return -1;
}
v += 4;
}
Where "correct" is the old lowering and "test" the new one.
The patch adds a test case for the two custom lowering instruction.
It also modifies the vector cost model, which is why cast.ll and uitofp.ll are
modified.
2009-02-26-MachineLICMBug.ll is also modified because we now hoist 7
instructions instead of 4 (3 more constant loads).
rdar://problem/18153096>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221657 91177308-0d34-0410-b5e6-96231b3b80d8
In the case we optimize an integer extend away and replace it directly with the
source register, we also have to clear all kill flags at all its uses.
This is necessary, because the orignal IR instruction might be trivially dead,
but we replaced it with a nop at MI level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221628 91177308-0d34-0410-b5e6-96231b3b80d8
Switch statements may have more than one incoming edge into the same BB if they
all have the same value. When the switch statement is converted these incoming
edges are now coming from multiple BBs. Updating all incoming values to be from
a single BB is incorrect and would generate invalid LLVM IR.
The fix is to only update the first occurrence of an incoming value. Switch
lowering will perform subsequent calls to this helper function for each incoming
edge with a new basic block - updating all edges in the process.
This fixes rdar://problem/18916275.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221627 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It currently only implements hasBranchDivergence, and will be extended
in later diffs.
Split from D6188.
Test Plan: make check-all
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221619 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a few cases of:
* Wrong variable name style.
* Lines longer than 80 columns.
* Repeated names in comments.
* clang-format of the above.
This make the next patch a lot easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221615 91177308-0d34-0410-b5e6-96231b3b80d8
FIXME: It should work on not only Linux but elf-targeting gnu ld.
For example if LLVM_DYLIB_COMPONENTS is "BitWriter Support", CMake emits the command line like;
-Wl,--whole-archive
lib/libLLVMBitWriter.a
lib/libLLVMSupport.a *1
-Wl,--no-whole-archive
lib/libLLVMCore.a
lib/libLLVMSupport.a *2
-lrt -ldl -ltinfo -lpthread -lm
It works since symbols in LLVMCore is resolved with not *2 but *1.
Unfortunately, --gc-sections is not powerful in this case to prune unused "visibility(default)" entries.
I am still experimenting other way not to rely on --whole-archive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221591 91177308-0d34-0410-b5e6-96231b3b80d8
We already use the llvm namespace. Remove the unnecessary prefix. Use the
StringRef::equals method to compare with C strings rather than instantiating
std::strings.
Addresses late review comments from David Majnemer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221564 91177308-0d34-0410-b5e6-96231b3b80d8
Visual Studio 2012 apparently does not support using alias declarations. Use
the more traditional typedef approach. This should let the Windows buildbots
pass. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221554 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces the symbol rewriter. This is an IR->IR transformation that is
implemented as a CodeGenPrepare pass. This allows for the transparent
adjustment of the symbols during compilation.
It provides a clean, simple, elegant solution for symbol inter-positioning. This
technique is often used, such as in the various sanitizers and performance
analysis.
The control of this is via a custom YAML syntax map file that indicates source
to destination mapping, so as to avoid having the compiler to know the exact
details of the source to destination transformations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221548 91177308-0d34-0410-b5e6-96231b3b80d8
