Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338387 91177308-0d34-0410-b5e6-96231b3b80d8
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333954 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Add wasm personality function
- Re-categorize the existing `isFuncletEHPersonality()` function into
two different functions: `isFuncletEHPersonality()` and
`isScopedEHPersonality(). This becomes necessary as wasm EH uses scoped
EH instructions (catchswitch, catchpad/ret, and cleanuppad/ret) but not
outlined funclets.
- Changed some callsites of `isFuncletEHPersonality()` to
`isScopedEHPersonality()` if they are related to scoped EH IR-level
stuff.
Reviewers: majnemer, dschuff, rnk
Subscribers: jfb, sbc100, jgravelle-google, eraman, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332667 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, we end up inlining a musttail call into a non-tail position,
which breaks verifier invariants.
Fixes PR31014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329015 91177308-0d34-0410-b5e6-96231b3b80d8
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
InlineFunction pass to ceause using the old IRBuilder CreateMemCpy single-alignment API
in favour of the new API that allows setting source and destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324384 91177308-0d34-0410-b5e6-96231b3b80d8
When using the partial inliner, we might have attributes for forwarded
varargs, but the CodeExtractor does not create an empty argument
attribute set for regular arguments in that case, because it does not know
of the additional arguments. So in case we have attributes for VarArgs, we
also have to make sure we create (empty) attributes for all regular arguments.
This fixes PR36210.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324197 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The class wraps a uint64_t and an enum to represent the type of profile
count (real and synthetic) with some helper methods.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41883
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no need to replace the original call instruction if no
VarArgs need to be forwarded.
Reviewers: davide, rnk, majnemer, efriedma
Reviewed By: efriedma
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D40412
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319947 91177308-0d34-0410-b5e6-96231b3b80d8
enum TailCallKind { TCK_None = 0, TCK_Tail = 1, TCK_MustTail = 2,
TCK_NoTail = 3 };
TCK_NoTail is greater than TCK_Tail so taking the min does not do the
correct thing.
rdar://35639547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319075 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch extends the partial inliner to support inlining parts of
vararg functions, if the vararg handling is done in the outlined part.
It adds a `ForwardVarArgsTo` argument to InlineFunction. If it is
non-null, all varargs passed to the inlined function will be added to
all calls to `ForwardVarArgsTo`.
The partial inliner takes care to only pass `ForwardVarArgsTo` if the
varargs handing is done in the outlined function. It checks that vastart
is not part of the function to be inlined.
`test/Transforms/CodeExtractor/PartialInlineNoInline.ll` (already part
of the repo) checks we do not do partial inlining if vastart is used in
a basic block that will be inlined.
Reviewers: davide, davidxl, grosser
Reviewed By: davide, davidxl, grosser
Subscribers: gyiu, grosser, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D39607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318028 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With instrumentation profiling, when updating the VP metadata after
an inline, VP metadata on the inlined copy was inadvertantly having
all counts zeroed out. This was causing indirect calls from code inlined
during the call step to be marked as cold in the ThinLTO summaries and
not imported.
The CallerBFI needs to be passed down so that the CallSiteCount can be
computed from the profile summary info. With Sample PGO this was working
since the count is extracted from the branch weight metadata on the
call being inlined (even before we stopped looking at metadata for
non-sample PGO in r302844 this largely wasn't working for instrumentation
PGO since only promoted indirect calls would be getting inlined and have
the metadata).
Added an instrumentation PGO test and renamed the sample PGO test.
Reviewers: danielcdh, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D33389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303574 91177308-0d34-0410-b5e6-96231b3b80d8
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
This reapplies r302469 with a fix for a bot failure (reparentDebugInfo
now checks for the case the orig and new function are identical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302576 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR32977.
Original commit message:
> Make it illegal for two Functions to point to the same DISubprogram
>
> As recently discussed on llvm-dev [1], this patch makes it illegal for
> two Functions to point to the same DISubprogram and updates
> FunctionCloner to also clone the debug info of a function to conform
> to the new requirement. To simplify the implementation it also factors
> out the creation of inlineAt locations from the Inliner into a
> general-purpose utility in DILocation.
>
> [1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
> <rdar://problem/31926379>
>
> Differential Revision: https://reviews.llvm.org/D32975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302533 91177308-0d34-0410-b5e6-96231b3b80d8
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302469 91177308-0d34-0410-b5e6-96231b3b80d8
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301682 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299888 91177308-0d34-0410-b5e6-96231b3b80d8
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298010 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r296488.
As noted by David Blaikie on llvm-commits, I overlooked the case of a
debug function being inlined into a nodebug function being inlined
into a debug function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297163 91177308-0d34-0410-b5e6-96231b3b80d8
The LLVM backend cannot produce any debug info for an llvm::Function
without a DISubprogram attachment. When inlining a debug-info-carrying
function into a nodebug function, there is therefore no reason to keep
any debug info intrinsic calls or debug locations on the instructions.
This fixes a problem discovered in PR32042.
rdar://problem/30679307
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296488 91177308-0d34-0410-b5e6-96231b3b80d8
This was suggested in D27855: have the inliner add assumptions, so we don't
lose nonnull info provided by argument attributes.
This still doesn't solve PR28430 (dyn_cast), but this gets us closer.
https://reviews.llvm.org/D29999
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296366 91177308-0d34-0410-b5e6-96231b3b80d8
Multiple blocks in the callee can be mapped to a single cloned block
since we prune the callee as we clone it. The existing code
iterates over the value map and clones the block frequency (and
eventually scales the frequencies of the cloned blocks). Value map's
iteration is not deterministic and so the cloned block might get the
frequency of any of the original blocks. The fix is to set the max of
the original frequencies to the cloned block. The first block in the
sequence must have this max frequency and, in the call context,
subsequent blocks must have its frequency.
Differential Revision: https://reviews.llvm.org/D29696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295115 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the following to the new PM based inliner in PGO mode:
* Use block frequency analysis to derive callsite's profile count and use
that to adjust thresholds of hot and cold callsites.
* Incrementally update the BFI of the caller after a callee gets inlined
into it. This incremental update is only within an invocation of the run
method - BFI is not preserved across calls to run.
Update the function entry count of the callee after inlining it into a
caller.
* I've tuned the thresholds for the hot and cold callsites using a hacked
up version of the old inliner that explicitly computes BFI on a set of
internal benchmarks and spec. Once the new PM based pipeline stabilizes
(IIRC Chandler mentioned there are known issues) I'll benchmark this
again and adjust the thresholds if required.
Inliner PGO support.
Differential revision: https://reviews.llvm.org/D28331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292666 91177308-0d34-0410-b5e6-96231b3b80d8
We bail out on the 1st line if the assumption cache is not set, so there's
no need to check it after that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290787 91177308-0d34-0410-b5e6-96231b3b80d8
inside of `InlineFunction`. Prior to this, call instructions are
specifically being rewritten and replaced within the inlined region,
invalidating some of the call sites.
Several of these regions are using the same technique to walk the
inlined region so this seems clearly safe up to this point.
I've also added a short circuit to the scan for call sites based on what
other code is doing.
With this, the most common crash I've found in the new inliner code is
fixed. I've turned it on for another test case that covers this
scenario.
I'll make my way through most of the other inliner test cases
just to get some easy coverage next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290562 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't implement *every* feature of the existing inliner, but
tries to implement the most important ones for building a functional
optimization pipeline and beginning to sort out bugs, regressions, and
other problems.
Notable, but intentional omissions:
- No alloca merging support. Why? Because it isn't clear we want to do
this at all. Active discussion and investigation is going on to remove
it, so for simplicity I omitted it.
- No support for trying to iterate on "internally" devirtualized calls.
Why? Because it adds what I suspect is inappropriate coupling for
little or no benefit. We will have an outer iteration system that
tracks devirtualization including that from function passes and
iterates already. We should improve that rather than approximate it
here.
- Optimization remarks. Why? Purely to make the patch smaller, no other
reason at all.
The last one I'll probably work on almost immediately. But I wanted to
skip it in the initial patch to try to focus the change as much as
possible as there is already a lot of code moving around and both of
these *could* be skipped without really disrupting the core logic.
A summary of the different things happening here:
1) Adding the usual new PM class and rigging.
2) Fixing minor underlying assumptions in the inline cost analysis or
inline logic that don't generally hold in the new PM world.
3) Adding the core pass logic which is in essence a loop over the calls
in the nodes in the call graph. This is a bit duplicated from the old
inliner, but only a handful of lines could realistically be shared.
(I tried at first, and it really didn't help anything.) All told,
this is only about 100 lines of code, and most of that is the
mechanics of wiring up analyses from the new PM world.
4) Updating the LazyCallGraph (in the new PM) based on the *newly
inlined* calls and references. This is very minimal because we cannot
form cycles.
5) When inlining removes the last use of a function, eagerly nuking the
body of the function so that any "one use remaining" inline cost
heuristics are immediately refined, and queuing these functions to be
completely deleted once inlining is complete and the call graph
updated to reflect that they have become dead.
6) After all the inlining for a particular function, updating the
LazyCallGraph and the CGSCC pass manager to reflect the
function-local simplifications that are done immediately and
internally by the inline utilties. These are the exact same
fundamental set of CG updates done by arbitrary function passes.
7) Adding a bunch of test cases to specifically target CGSCC and other
subtle aspects in the new PM world.
Many thanks to the careful review from Easwaran and Sanjoy and others!
Differential Revision: https://reviews.llvm.org/D24226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290161 91177308-0d34-0410-b5e6-96231b3b80d8
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289756 91177308-0d34-0410-b5e6-96231b3b80d8
When a function F is inlined, InlineFunction extends the debug location of every
instruction inlined from F by adding an InlinedAt.
However, if an instruction has a 'null' debug location, InlineFunction would
propagate the callsite debug location to it. This behavior existed since
revision 210459.
Revision 210459 was originally committed specifically to workaround the lack of
debug information for instructions inlined from intrinsic functions (which are
usually declared with attributes `__always_inline__, __nodebug__`).
The problem with revision 210459 is that it doesn't make any sort of distinction
between instructions inlined from a 'nodebug' function and instructions which
are inlined from a function built with debug info. This issue may lead to
incorrect stepping in the debugger.
This patch works under the assumption that a nodebug function does not have a
DISubprogram. When a function F is inlined into another function G,
InlineFunction checks if F has debug info associated with it.
For nodebug functions, the InlineFunction logic is unchanged (i.e. it would
still propagate the callsite debugloc to the inlined instructions). Otherwise,
InlineFunction no longer propagates the callsite debug location.
Differential Revision: https://reviews.llvm.org/D27462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288895 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286893 91177308-0d34-0410-b5e6-96231b3b80d8
This would create a bitcast use which fails the verifier: swifterror values may
only be used by loads, stores, and as function arguments.
rdar://28233244
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281114 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280610 91177308-0d34-0410-b5e6-96231b3b80d8
