is < ``2.0``.
Older versions of psutil (e.g. ``1.2.1`` which is the version shipped with
Ubuntu 14.04) use a different API for retrieving the child processes.
To handle this try the new API first and if that fails try the old API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257616 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257268 91177308-0d34-0410-b5e6-96231b3b80d8
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257221 91177308-0d34-0410-b5e6-96231b3b80d8
This should work with ShTest (executed externally or internally) and GTest
test formats.
To set the timeout a new option ``--timeout=`` has
been added which specifies the maximum run time of an individual test
in seconds. By default this 0 which causes no timeout to be enforced.
The timeout can also be set from a lit configuration file by modifying
the ``lit_config.maxIndividualTestTime`` property.
To implement a timeout we now require the psutil Python module if a
timeout is requested. This dependency is confined to the newly added
``lit.util.killProcessAndChildren()``. A note has been added into the
TODO document describing how we can remove the dependency on the
``pustil`` module in the future. It would be nice to remove this
immediately but that is a lot more work and Daniel Dunbar believes it is
better that we get a working implementation first and then improve it.
To avoid breaking the existing behaviour the psutil module will not be
imported if no timeout is requested.
The included testcases are derived from test cases provided by
Jonathan Roelofs which were in an previous attempt to add a per test
timeout to lit (http://reviews.llvm.org/D6584). Thanks Jonathan!
Reviewers: ddunbar, jroelofs, cmatthews, MatzeB
Subscribers: cmatthews, llvm-commits
Differential Revision: http://reviews.llvm.org/D14706
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256471 91177308-0d34-0410-b5e6-96231b3b80d8
the script when running a ShTest with an external or internal shell.
This bug is caused by use of the ``map`` function in Python 3 which
returns an iterable (rather than a list in Python 2). After the iterable
is exhausted it won't return any more output and consequently when
``_runShTest()`` tries to access the ``script`` which has already been
iterated over it is empty. Converting to a list immediatley after
calling ``map()`` fixes this.
This fixes the ``tests/shtest-format.py`` test when running under
Python3 which was previously failing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253556 91177308-0d34-0410-b5e6-96231b3b80d8
instead of executable if the argument was found inside a directory
contained in PATH.
An example where this could cause a problem is if there was a RUN line
that ran the ``test`` command and if the user had a directory in their
PATH that contained a directory called ``test/`` (that occured before
``/usr/bin/``). Lit would try to use the directory as the executable
which would fail with the rather cryptic message.
```
Could not create process due to [Errno 13] Permission denied
```
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253031 91177308-0d34-0410-b5e6-96231b3b80d8
The existing -v option only displays commands and outputs for failed
tests, the newly introduced -a displays it for all executed tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251806 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the function to be easily reused and also simplifies the
code as the keyword list is next to the keyword handling now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251478 91177308-0d34-0410-b5e6-96231b3b80d8
It is common to have a default soft process limit, at least on some families of
Linux distributions, of 1024. This is normally more than enough, but if you
have many cores, and you're running tests that create many threads, this can
become a problem. My POWER7 development machine has 48 cores, and when running
the lld regression tests, which often want to create up to 48 threads, I run
into problems. lit, by default, will want to run 48 tests in parallel, and
48*48 < 1024, and so many tests fail like this:
terminate called after throwing an instance of 'std::system_error'
what(): Resource temporarily unavailable
or lit fails like this when launching a test:
OSError: [Errno 11] Resource temporarily unavailable
lit can easily detect this situation and attempt to repair it before launching
tests (by raising the soft process limit to something that will allow ncpus^2
threads to be created), and should do so to prevent spurious test failures.
This is the follow-up to this thread:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/090942.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249161 91177308-0d34-0410-b5e6-96231b3b80d8
The variable is actually called ANDROID_SERIAL.
This was not exercised on the bots until today.
Should fix the sanitizer-x86_64-linux failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246898 91177308-0d34-0410-b5e6-96231b3b80d8
The plan is to use this for the sanitizer test suite on Windows. See
PR24554 for more details on why we need this.
Tested manually by injecting rand() into a sanitizer test and watching
what it does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246704 91177308-0d34-0410-b5e6-96231b3b80d8
My theory is that somehow Python's refcounting and GC strategy isn't
closing the subprocess handle in a timely fashion. This accesses the
private '_handle' field of the Popen object, but I see no other way to
do this. If this doesn't address the problem on the sanitizer-windows
buildbot, we can revert this change. If it does, then let's keep the
hack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245946 91177308-0d34-0410-b5e6-96231b3b80d8
This was affecting test/asan/TestCases/Windows/coverage-basic.cc in
compiler-rt. It does something like:
cd %T/mydir
%clang %s -o t.exe
./t.exe
Previously, we'd end up looking for t.exe relative to the cwd of the lit
process, not the cwd of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242941 91177308-0d34-0410-b5e6-96231b3b80d8
The MSys 2 version of 'env' cannot be used to set 'TZ' in the
environment due to some portability hacks in the process spawning
compatibility layer[1]. This affects test/Object/archive-toc.test, which
tries to set TZ in the environment.
Other than that, this saves a subprocess invocation of a small unix
utility, which is makes the tests faster.
The internal shell does not support shell variable expansion, so this
idiom in the ASan tests isn't supported yet:
RUN: env ASAN_OPTIONS=$ASAN_OPTIONS:opt=1 ...
[1] https://github.com/Alexpux/MSYS2-packages/issues/294
Differential Revision: http://reviews.llvm.org/D11350
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242696 91177308-0d34-0410-b5e6-96231b3b80d8
Pass ADB and ADB_SERIAL environment variables to lit tests.
This would allow running Android tests in compiler-rt when
there is more than one device attached to the host.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240459 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I spend some time trying to get the LIT test suite passing. Here are the changes that I needed to make on my machine.
I made the following changes for the following reasons.
1. google-test.py: The Google test format now checks for "[ PASSED ] 1 test." to check if a test passes.
2. discovery.py: The output appears in a different order on my machine than it did in the test.
3. unittest-adaptor.py: The output appears in a different order on my machine than it did in the test.
4. The classname is now formed differently in `getJUnitXML(...)`.
I'm not sure what is causing the output order to differ in discovery.py and unittest-adaptor.py. Does anybody have any thoughts?
Reviewers: ddunbar, danalbert, jroelofs
Reviewed By: jroelofs
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9864
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239663 91177308-0d34-0410-b5e6-96231b3b80d8
By setting limit_to_features to a non empty list of features a configuration can
restrict the set of tests to run to only include tests that require a feature in
this list.
rdar://21082253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238766 91177308-0d34-0410-b5e6-96231b3b80d8
These changes allow usages where you want to pass an additional
commandline option to all invocations of a specific llvm tool. Example:
> llvm-lit -Dllc=llc -enable-misched -verify-machineinstrs
Differential Revision: http://reviews.llvm.org/D9487
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236461 91177308-0d34-0410-b5e6-96231b3b80d8
The sanitizer test suite uses this idiom to disable a test. Now that we
actually check if a test ran after invoking it, we see that zero tests
ran, and complain.
Instead, ignore tests starting with DISABLED_ completely. Fixes the
sanitizer test suite failures on Windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234247 91177308-0d34-0410-b5e6-96231b3b80d8
The '/' character in the test name of a type-parameterized test is not a
path separator, and should not be '\' on Windows. We were passing a test
name to --gtest_filter which found no tests, so the exit code was zero,
indicating a passed test.
This bug has been here since r84387 in 2009, when Jeff Yasskin added the
original lit support for type-paratermized tests. Somewhere along the
line some of the ValueMapTests started failing, but we can fix those
separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234242 91177308-0d34-0410-b5e6-96231b3b80d8
The internal shell was already threading around a 'cwd' parameter. We
just have to make it mutable so that we can update it as the test script
executes.
If the shell ever grows support for environment variable substitution,
we could also implement support for export.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231017 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: I think this is probably a bug, but I'm putting this up for review just to be sure. I think that `lit.util.capture` should decode the resulting string in the same way `lit.util.executeCommand` does.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225681 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The following types can be encoded and decoded by the json library:
`dict`, `list`, `tuple`, `str`, `unicode`, `int`, `long`, `float`, `bool`, `NoneType`.
`JSONMetricValue` can be constructed with any of these types, and used as part of Test.Result.
This patch also adds a toMetricValue function that converts a value into a MetricValue.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224628 91177308-0d34-0410-b5e6-96231b3b80d8
We were already requiring 2.5, which meant that people on old linux distros
had to upgrade anyway.
Requiring python 2.6 will make supporting 3.X easier as we can use the 3.X
exception syntax.
According to the discussion on llvmdev, there is not much value is requiring
just 2.6, we may as well just require 2.7.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224129 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch gives me just enough to leverage the existing functionality in `TestRunner` for use in `libc++` and `libc++abi` .
It does the following:
* Adds the `UNSUPPORTED` tag to `TestRunner.parseIntegratedTestScript`.
* Allows `parseIntegratedTestScript` to return an empty script if a script is not required by the caller.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223915 91177308-0d34-0410-b5e6-96231b3b80d8
