The --args option can now be used to pass arguments to code linked with
llvm-jitlink. E.g.
$ llvm-jitlink file1.o file2.o --args a b c
is equivalent to:
$ ld -o program file1.o file2.o
$ ./program a b c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359115 91177308-0d34-0410-b5e6-96231b3b80d8
Frame Descriptor Entries (FDEs) have a pointer back to a Common Information
Entry (CIE) that describes how the rest FDE should be parsed. JITLink had been
assuming that FDEs always referred to the most recent CIE encountered, but the
spec allows them to point back to any previously encountered CIE. This patch
fixes JITLink to look up the correct CIE for the FDE.
The testcase is a MachO binary with an FDE that refers to a CIE that is not the
one immediately proceeding it (the layout can be viewed wit
'dwarfdump --eh-frame <testcase>'. This test case had to be a binary as llvm-mc
now sorts FDEs (as of r356216) to ensure FDEs *do* point to the most recent CIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359105 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the variables naming to match LLVM style,
simplifies the code used to extract the group members,
simplifies the loop and reorders the code around a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359101 91177308-0d34-0410-b5e6-96231b3b80d8
This was meant to be part of the original commit r358921, but somehow
got lost.
<rdar://problem/49751748>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359010 91177308-0d34-0410-b5e6-96231b3b80d8
When a Swift module built with debug info imports a library without
debug info from a textual interface, the textual interface is
necessary to reconstruct types defined in the library's interface. By
recording the Swift interface files in DWARF dsymutil can collect them
and LLDB can find them.
This patch teaches dsymutil to look for DW_TAG_imported_modules and
records all references to parseable Swift ingterfrace files and copies
them to
a.out.dSYM/Contents/Resources/<Arch>/<ModuleName>.swiftinterface
<rdar://problem/49751748>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358921 91177308-0d34-0410-b5e6-96231b3b80d8
The -dump-relocated-section-content option will dump the contents of each
section after relocations are applied, and before any checks are run or
code executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358863 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
JITLink is a jit-linker that performs the same high-level task as RuntimeDyld:
it parses relocatable object files and makes their contents runnable in a target
process.
JITLink aims to improve on RuntimeDyld in several ways:
(1) A clear design intended to maximize code-sharing while minimizing coupling.
RuntimeDyld has been developed in an ad-hoc fashion for a number of years and
this had led to intermingling of code for multiple architectures (e.g. in
RuntimeDyldELF::processRelocationRef) in a way that makes the code more
difficult to read, reason about, extend. JITLink is designed to isolate
format and architecture specific code, while still sharing generic code.
(2) Support for native code models.
RuntimeDyld required the use of large code models (where calls to external
functions are made indirectly via registers) for many of platforms due to its
restrictive model for stub generation (one "stub" per symbol). JITLink allows
arbitrary mutation of the atom graph, allowing both GOT and PLT atoms to be
added naturally.
(3) Native support for asynchronous linking.
JITLink uses asynchronous calls for symbol resolution and finalization: these
callbacks are passed a continuation function that they must call to complete the
linker's work. This allows for cleaner interoperation with the new concurrent
ORC JIT APIs, while still being easily implementable in synchronous style if
asynchrony is not needed.
To maximise sharing, the design has a hierarchy of common code:
(1) Generic atom-graph data structure and algorithms (e.g. dead stripping and
| memory allocation) that are intended to be shared by all architectures.
|
+ -- (2) Shared per-format code that utilizes (1), e.g. Generic MachO to
| atom-graph parsing.
|
+ -- (3) Architecture specific code that uses (1) and (2). E.g.
JITLinkerMachO_x86_64, which adds x86-64 specific relocation
support to (2) to build and patch up the atom graph.
To support asynchronous symbol resolution and finalization, the callbacks for
these operations take continuations as arguments:
using JITLinkAsyncLookupContinuation =
std::function<void(Expected<AsyncLookupResult> LR)>;
using JITLinkAsyncLookupFunction =
std::function<void(const DenseSet<StringRef> &Symbols,
JITLinkAsyncLookupContinuation LookupContinuation)>;
using FinalizeContinuation = std::function<void(Error)>;
virtual void finalizeAsync(FinalizeContinuation OnFinalize);
In addition to its headline features, JITLink also makes other improvements:
- Dead stripping support: symbols that are not used (e.g. redundant ODR
definitions) are discarded, and take up no memory in the target process
(In contrast, RuntimeDyld supported pointer equality for weak definitions,
but the redundant definitions stayed resident in memory).
- Improved exception handling support. JITLink provides a much more extensive
eh-frame parser than RuntimeDyld, and is able to correctly fix up many
eh-frame sections that RuntimeDyld currently (silently) fails on.
- More extensive validation and error handling throughout.
This initial patch supports linking MachO/x86-64 only. Work on support for
other architectures and formats will happen in-tree.
Differential Revision: https://reviews.llvm.org/D58704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358818 91177308-0d34-0410-b5e6-96231b3b80d8
This was caught by UBSAN
tools/llvm-objdump/X86/macho-disassembly-g-dsym.test
tools/llvm-objdump/X86/hex-displacement.test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358806 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Trying to add the plumbing necessary to add tuning options to the new pass manager.
Testing with the flags for loop vectorize.
Reviewers: chandlerc
Subscribers: sanjoy, mehdi_amini, jlebar, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358763 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an alias for llvm-symbolizer with different defaults so that
it can be used as a drop-in replacement for GNU's addr2line.
If a substring "addr2line" is found in the tool's name:
* it defaults "-i", "-f" and "-C" to OFF;
* it uses "--output-style=GNU" by default.
Differential Revision: https://reviews.llvm.org/D60067
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358749 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses two differences in the output of llvm-symbolizer
and GNU's addr2line:
* llvm-symbolizer prints an empty line after the report for an address.
* With "-f -i=0", llvm-symbolizer replaces the name of an inlined
function with the name from the symbol table, i. e., the top caller
function in the inlining chain. addr2line preserves the name of the
inlined function.
Differential Revision: https://reviews.llvm.org/D60770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358747 91177308-0d34-0410-b5e6-96231b3b80d8
.rela.dyn is a section that has sh_info normally
set to zero. And Info is an optional field in the description
of the relocation section in YAML.
But currently, yaml2obj would fail to produce the object when
Info is not explicitly listed.
The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D60820
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358656 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objcopy currently emits an error if a section to be removed is
referenced by another section. This is a reasonable thing to do, but is
different to GNU objcopy. We should allow users who know what they are
doing to have a way to produce the invalid ELF. This change adds a new
switch --allow-broken-links to both llvm-strip and llvm-objcopy to do
precisely that. The corresponding sh_link field is then set to 0 instead
of an error being emitted.
I cannot use llvm-readelf/readobj to test the link fields because they
emit an error if any sections, like the .dynsym, cannot be properly
loaded.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D60324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358649 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Reapply r357931 with fixes to ThinLTO testcases and llvm-lto tool.
ThinLTOCodeGenerator currently does not preserve llvm.used symbols and
it can internalize them. In order to pass the necessary information to the
legacy ThinLTOCodeGenerator, the input to the code generator is
rewritten to be based on lto::InputFile.
Now ThinLTO using the legacy LTO API will requires data layout in
Module.
"internalize" thinlto action in llvm-lto is updated to run both
"promote" and "internalize" with the same configuration as
ThinLTOCodeGenerator. The old "promote" + "internalize" option does not
produce the same output as ThinLTOCodeGenerator.
This fixes: PR41236
rdar://problem/49293439
Reviewers: tejohnson, pcc, kromanova, dexonsmith
Reviewed By: tejohnson
Subscribers: ormris, bd1976llvm, mehdi_amini, inglorion, eraman, hiraditya, jkorous, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358601 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change takes the full list of bfd targets that lld supports (see `ScriptParser.cpp`), including generic handling for `*-freebsd` targets (which uses the same settings but with a FreeBSD OSABI). In particular this adds mips support for `--output-target` (but not yet via `--binary-architecture`).
lld and llvm-objcopy use their own different custom data structures, so I'd prefer to check this in as-is (add support directly in llvm-objcopy, including all the test coverage) and do a separate NFC patch(s) that consolidate the two by putting this mapping into libobject.
See [[ https://bugs.llvm.org/show_bug.cgi?id=41462 | PR41462 ]].
Reviewers: jhenderson, jakehehrlich, espindola, alexshap, arichardson
Reviewed By: arichardson
Subscribers: fedor.sergeev, emaste, sdardis, krytarowski, atanasyan, llvm-commits, MaskRay, arichardson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60773
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358562 91177308-0d34-0410-b5e6-96231b3b80d8
The default handling splits input into lines. Since
llvm-microsoft-demangle-fuzzer doesn't do this, oss-fuzz produces inputs
that only trigger crashes if the input isn't split into lines. This adds
a hidden flag -raw-file which passes file contents to microsoftDemangle() in
the same way the fuzzer does, for reproducing oss-fuzz reports.
Also change llvm-undname to have a non-0 exit code for invalid symbols.
Differential Revision: https://reviews.llvm.org/D60771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358485 91177308-0d34-0410-b5e6-96231b3b80d8
This relands D60376/rL358405, with the difference: sed 'y/\t/ /' -> tr '\t' ' '
BSD sed doesn't support escape characters for the 'y' command.
I didn't use it in rL358405 because it was not listed at
https://llvm.org/docs/GettingStarted.html#software but it
should be available.
Original description:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358474 91177308-0d34-0410-b5e6-96231b3b80d8
This relands rL358418. It missed one test that should also use -macho
Note, all the other -private-header -exports-trie tests are used
together with -macho.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358472 91177308-0d34-0410-b5e6-96231b3b80d8
The test fails on darwin due to a sed error:
sed: 1: "y/\t/ /": transform strings are not the same length
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358459 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Add DefaultOption flag to CommandLineParser which provides a
default option or alias, but allows users to override it for some
other purpose as needed.
Also, add `-h` as a default alias to `-help`, which can be seamlessly
overridden by applications like llvm-objdump and llvm-readobj which
use `-h` as an alias for other options.
(relanding after revert, r358414)
Added DefaultOptions.clear() to reset().
Reviewers: alexfh, klimek
Reviewed By: klimek
Subscribers: kristina, MaskRay, mehdi_amini, inglorion, dexonsmith, hiraditya, llvm-commits, jhenderson, arphaman, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D59746
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358428 91177308-0d34-0410-b5e6-96231b3b80d8
Nico Weber