Change the unnamed label comments like
; <label>:8 ; preds = %1
to
; <label>:8: ; preds = %1
This way lit tests can match [[LABEL]]: in both asserts and no-asserts builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258993 91177308-0d34-0410-b5e6-96231b3b80d8
Fix PR24852 (crash with -debug -instcombine)
Patch by Than McIntosh <thanm@google.com>
Summary:
Add guards to the asm writer to prevent crashing
when dumping an instruction that has no basic
block.
Differential Revision: http://reviews.llvm.org/D15798
From: Than McIntosh <thanm@google.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257094 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commit renames GCRelocateOperands to GCRelocateInst and makes it an
intrinsic wrapper, similar to e.g. MemCpyInst. Also, all users of
GCRelocateOperands were changed to use the new intrinsic wrapper instead.
Reviewers: sanjoy, reames
Subscribers: reames, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D15762
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256811 91177308-0d34-0410-b5e6-96231b3b80d8
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences. Does not
use binary literals.
Differential Revision: http://reviews.llvm.org/D13829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256095 91177308-0d34-0410-b5e6-96231b3b80d8
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Includes a fix to scrub value subclass data in dropAllReferences.
Differential Revision: http://reviews.llvm.org/D13829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256093 91177308-0d34-0410-b5e6-96231b3b80d8
Make personality functions, prefix data, and prologue data hungoff
operands of Function.
This is based on the email thread "[RFC] Clean up the way we store
optional Function data" on llvm-dev.
Thanks to sanjoyd, majnemer, rnk, loladiro, and dexonsmith for feedback!
Differential Revision: http://reviews.llvm.org/D13829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256090 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255522 91177308-0d34-0410-b5e6-96231b3b80d8
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255422 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a new target-independent calling convention for C++ TLS
access functions. It aims to minimize overhead in the caller by perserving as
many registers as possible.
The target-specific implementation for X86-64 is defined as following:
Arguments are passed as for the default C calling convention
The same applies for the return value(s)
The callee preserves all GPRs - except RAX and RDI
The access function makes C-style TLS function calls in the entry and exit
block, C-style TLS functions save a lot more registers than normal calls.
The added calling convention ties into the existing implementation of the
C-style TLS functions, so we can't simply use existing calling conventions
such as preserve_mostcc.
rdar://9001553
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254737 91177308-0d34-0410-b5e6-96231b3b80d8
When working with tokens, it is often the case that one has instructions
which consume a token and produce a new token. Currently, we have no
mechanism to represent an initial token state.
Instead, we can create a notional "empty token" by inventing a new
constant which captures the semantics we would like. This new constant
is called ConstantTokenNone and is written textually as "token none".
Differential Revision: http://reviews.llvm.org/D14581
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252811 91177308-0d34-0410-b5e6-96231b3b80d8
No code uses this functionality yet. This change just exposes
information / structure that was already present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252644 91177308-0d34-0410-b5e6-96231b3b80d8
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252368 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252219 91177308-0d34-0410-b5e6-96231b3b80d8
Stop converting implicitly between iterators and pointers/references in
lib/IR. For convenience, I've added a `getIterator()` accessor to
`ilist_node` so that callers don't need to know how to spell the
iterator class (i.e., they can use `X.getIterator()` instead of
`Function::iterator(X)`).
I'll eventually disallow these implicit conversions entirely, but
there's a lot of code, so it doesn't make sense to do it all in one
patch. One library or so at a time.
Why? To root out cases of `getNextNode()` and `getPrevNode()` being
used in iterator logic. The design of `ilist` makes that invalid when
the current node could be at the back of the list, but it happens to
"work" right now because of a bug where those functions never return
`nullptr` if you're using a half-node sentinel. Before I can fix the
function, I have to remove uses of it that rely on it misbehaving.
(Maybe the function should just be deleted anyway? But I don't want
deleting it -- potentially a huge project -- to block fixing
ilist/iplist.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249782 91177308-0d34-0410-b5e6-96231b3b80d8
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248832 91177308-0d34-0410-b5e6-96231b3b80d8
When llvm declarations have argument names, it's helpful to actually
print those names when debugging. Arguably, it'd be nice to print them
all the time, but that would mean the IR we output wouldn't round trip
through bitcode, which doesn't store the names.
Make the varous print() methods in AsmWriter optionally print "for
debug" and set that flag in the dump() methods. The only thing this
does differently for now is print the argument names in declarations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248692 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This also adds the first set of tests for operand bundles.
The optimizer has not been audited to ensure that it does the right
thing with operand bundles.
Depends on D12456.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: maksfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12457
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248551 91177308-0d34-0410-b5e6-96231b3b80d8
The rest of the EH pads are fine, since they have at most one label and
take fewer operands for the personality.
Old catchpad vs. new:
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)] to label %__except.ret.10 unwind label %catchendblock.9
-----
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)]
to label %__except.ret.10 unwind label %catchendblock.9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247433 91177308-0d34-0410-b5e6-96231b3b80d8
Fix embarrassing bugs I introduced to the `SlotTracker` in or around
r235785. I had us iterating through every instruction in a function
(and hitting a map in the LLVMContext) for every basic block in the
function.
While there, completely avoid the call to
`SlotTracker::processFunctionMetadata()` from
`SlotTracker::processFunction()` if we've speculatively done this
already in `SlotTracker::processModule()` by checking
`ShouldInitializeAllMetadata` (this wasn't an algorithmic problem, but
it's touching the same line of code).
Fixes PR24699.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247372 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a `cleanupendpad` instruction, used to mark exceptional exits out of
cleanups (for languages/targets that can abort a cleanup with another
exception). The `cleanupendpad` instruction is similar to the `catchendpad`
instruction in that it is an EH pad which is the target of unwind edges in
the handler and which itself has an unwind edge to the next EH action.
The `cleanupendpad` instruction, similar to `cleanupret` has a `cleanuppad`
argument indicating which cleanup it exits. The unwind successors of a
`cleanuppad`'s `cleanupendpad`s must agree with each other and with its
`cleanupret`s.
Update WinEHPrepare (and docs/tests) to accomodate `cleanupendpad`.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246751 91177308-0d34-0410-b5e6-96231b3b80d8
Function::print isn't interestingly different from Value::print. Just
let the only caller (in PrintCallGraphPass) call the Value version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245797 91177308-0d34-0410-b5e6-96231b3b80d8
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245149 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245029 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags,
using `DW_TAG_variable` in their place Stop exposing the `tag:` field at
all in the assembly format for `DILocalVariable`.
Most of the testcase updates were generated by the following sed script:
find test/ -name "*.ll" -o -name "*.mir" |
xargs grep -l 'DILocalVariable' |
xargs sed -i '' \
-e 's/tag: DW_TAG_arg_variable, //' \
-e 's/tag: DW_TAG_auto_variable, //'
There were only a handful of tests in `test/Assembly` that I needed to
update by hand.
(Note: a follow-up could change `DILocalVariable::DILocalVariable()` to
set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable`
(as appropriate), instead of having that logic magically in the backend
in `DbgVariable`. I've added a FIXME to that effect.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243774 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Differential Revision: http://reviews.llvm.org/D11097
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243766 91177308-0d34-0410-b5e6-96231b3b80d8
This commit publicly exposes the method 'getLocalSlot' in the
'ModuleSlotTracker' class.
This change is useful for MIR serialization, to serialize the unnamed basic
block and unnamed alloca references.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243336 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of the pattern
for (auto I = x.rbegin(), E = x.end(); I != E; ++I)
we can use make_range to construct the reverse range and iterate using
that instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243163 91177308-0d34-0410-b5e6-96231b3b80d8
This commit extracts the code that prints out a name of an LLVM value without a
prefix from a function 'PrintLLVMName' into a publicly accessible function named
'printLLVMNameWithoutPrefix'.
This change would be useful for MIR serialization, as it would allow the MIR
printer to reuse this function to print out the names of the external symbol
machine operands.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242803 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Reviewers: rnk, JosephTremoulet, reames, nlewycky, rjmccall
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241888 91177308-0d34-0410-b5e6-96231b3b80d8
It is meant to be used to record modules @imported by the current
compile unit, so a debugger an import the same modules to replicate this
environment before dropping into the expression evaluator.
DIModule is a sibling to DINamespace and behaves quite similarly.
In addition to the name of the module it also records the module
configuration details that are necessary to uniquely identify the module.
This includes the configuration macros (e.g., -DNDEBUG), the include path
where the module.map file is to be found, and the isysroot.
The idea is that the backend will turn this into a DW_TAG_module.
http://reviews.llvm.org/D9614
rdar://problem/20965932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241017 91177308-0d34-0410-b5e6-96231b3b80d8
Allow callers of `Value::print()` and `Metadata::print()` to pass in a
`ModuleSlotTracker`. This allows them to pay only once for calculating
module-level slots (such as Metadata).
This is related to PR23865, where there was a huge cost for
`MachineFunction::print()`. Although I don't have a *particular* user
in mind for this new code, I have hit big slowdowns before when running
`opt -debug`, and I think this will be useful. Going forward, if
someone hits a big slowdown with `print()` statements, they can create a
`ModuleSlotTracker` and send it through. Similarly, adding support to
`Value::dump()` and `Metadata::dump()` should be trivial.
I added unit tests to be sure the `print()` functions actually behave
the same way with and without the slot tracker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240867 91177308-0d34-0410-b5e6-96231b3b80d8
For another 1% speedup on the testcase in PR23865, push the
`ModuleSlotTracker` through to metadata-related printing in
`MachineBasicBlock::print()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240848 91177308-0d34-0410-b5e6-96231b3b80d8
Expose enough of the IR-level `SlotTracker` so that
`MachineFunction::print()` can use a single one for printing
`BasicBlock`s. Next step would be to lift this through a few more APIs
so that we can make other print methods faster.
Fixes PR23865, changing the runtime of `llc -print-machineinstrs` from
many minutes (killed after 3 minutes, but it wasn't very close) to
13 seconds for a 502185 line dump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240842 91177308-0d34-0410-b5e6-96231b3b80d8
