to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes the IDom for exit blocks and all blocks reachable from the exit blocks, when runtime unrolling under multiexit/exiting case.
We initially had a restrictive check that the IDom is only updated when
it is the header of the loop.
However, we also need to update the IDom to the correct one when the
IDom is any block within the original loop. See added test cases (which
fail dom tree verification without the patch).
Reviewers: reames, mzolotukhin, mkazantsev, hfinkel
Reviewed by: brzycki, kuhar
Subscribers: zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D56284
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350640 91177308-0d34-0410-b5e6-96231b3b80d8
NFC: This adds the dom tree verification under debug mode at a point
just before we start unrolling the loop. This allows us to verify dom
tree at a state where it is much smaller and before the unrolling
actually happens.
This also implies we do not need to run -verify-dom-info everytime to
see if the DT is in a valid state when we transform the loop for runtime
unrolling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350334 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, runtime unrolling does not support loops where multiple
exiting blocks exit to the latchExit. Added TODO and other code
clarifications for ConnectProlog code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349944 91177308-0d34-0410-b5e6-96231b3b80d8
When multiple loop transformation are defined in a loop's metadata, their order of execution is defined by the order of their respective passes in the pass pipeline. For instance, e.g.
#pragma clang loop unroll_and_jam(enable)
#pragma clang loop distribute(enable)
is the same as
#pragma clang loop distribute(enable)
#pragma clang loop unroll_and_jam(enable)
and will try to loop-distribute before Unroll-And-Jam because the LoopDistribute pass is scheduled after UnrollAndJam pass. UnrollAndJamPass only supports one inner loop, i.e. it will necessarily fail after loop distribution. It is not possible to specify another execution order. Also,t the order of passes in the pipeline is subject to change between versions of LLVM, optimization options and which pass manager is used.
This patch adds 'followup' attributes to various loop transformation passes. These attributes define which attributes the resulting loop of a transformation should have. For instance,
!0 = !{!0, !1, !2}
!1 = !{!"llvm.loop.unroll_and_jam.enable"}
!2 = !{!"llvm.loop.unroll_and_jam.followup_inner", !3}
!3 = !{!"llvm.loop.distribute.enable"}
defines a loop ID (!0) to be unrolled-and-jammed (!1) and then the attribute !3 to be added to the jammed inner loop, which contains the instruction to distribute the inner loop.
Currently, in both pass managers, pass execution is in a fixed order and UnrollAndJamPass will not execute again after LoopDistribute. We hope to fix this in the future by allowing pass managers to run passes until a fixpoint is reached, use Polly to perform these transformations, or add a loop transformation pass which takes the order issue into account.
For mandatory/forced transformations (e.g. by having been declared by #pragma omp simd), the user must be notified when a transformation could not be performed. It is not possible that the responsible pass emits such a warning because the transformation might be 'hidden' in a followup attribute when it is executed, or it is not present in the pipeline at all. For this reason, this patche introduces a WarnMissedTransformations pass, to warn about orphaned transformations.
Since this changes the user-visible diagnostic message when a transformation is applied, two test cases in the clang repository need to be updated.
To ensure that no other transformation is executed before the intended one, the attribute `llvm.loop.disable_nonforced` can be added which should disable transformation heuristics before the intended transformation is applied. E.g. it would be surprising if a loop is distributed before a #pragma unroll_and_jam is applied.
With more supported code transformations (loop fusion, interchange, stripmining, offloading, etc.), transformations can be used as building blocks for more complex transformations (e.g. stripmining+stripmining+interchange -> tiling).
Reviewed By: hfinkel, dmgreen
Differential Revision: https://reviews.llvm.org/D49281
Differential Revision: https://reviews.llvm.org/D55288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348944 91177308-0d34-0410-b5e6-96231b3b80d8
In this patch, I'm adding an extra check to the Latch's terminator in llvm::UnrollRuntimeLoopRemainder,
similar to how it is already done in the llvm::UnrollLoop.
The compiler would crash if this function is called with a malformed loop.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D51486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342958 91177308-0d34-0410-b5e6-96231b3b80d8
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334492 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
Current runtime unrolling invalidates parent loop saying that it might have changed
after the inner loop has changed, but it doesn't bother to do the same to its parents.
With patch rL329047, SCEV becomes much smarter about calculation of exit counts for
outer loops. We might need to invalidate not only the immediate parent, but also
any of its parents as well.
There is no clear evidence that there is some miscompile happening because of this
(at least I don't have such test), but the common sense says that the current code
is wrong.
Differential Revision: https://reviews.llvm.org/D45940
Reviewed By: chandlerc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330577 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes layering - Transforms/Utils shouldn't depend on including a Scalar
or IPO header, because Scalar and IPO depend on Utils.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328717 91177308-0d34-0410-b5e6-96231b3b80d8
NewExit and epilog PreHeader should has the same debug loc as the original loop
body, instead of original loop exit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321465 91177308-0d34-0410-b5e6-96231b3b80d8
The optimisation remarks for loop unrolling with an unrolled remainder looks something like:
test.c:7:18: remark: completely unrolled loop with 3 iterations [-Rpass=loop-unroll]
C[i] += A[i*N+j];
^
test.c:6:9: remark: unrolled loop by a factor of 4 with run-time trip count [-Rpass=loop-unroll]
for(int j = 0; j < N; j++)
^
This removes the first of the two messages.
Differential revision: https://reviews.llvm.org/D38725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316986 91177308-0d34-0410-b5e6-96231b3b80d8
Add a profitability heuristic to enable runtime unrolling of multi-exit
loop: There can be atmost two unique exit blocks for the loop and the
second exit block should be a deoptimizing block. Also, there can be one
other exiting block other than the latch exiting block. The reason for
the latter is so that we limit the number of branches in the unrolled
code to being at most the unroll factor. Deoptimizing blocks are rarely
taken so these additional number of branches created due to the
unrolling are predictable, since one of their target is the deopt block.
Reviewers: apilipenko, reames, evstupac, mkuper
Subscribers: llvm-commits
Reviewed by: reames
Differential Revision: https://reviews.llvm.org/D35380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313363 91177308-0d34-0410-b5e6-96231b3b80d8
During runtime unrolling on loops with multiple exits, we update the
exit blocks with the correct phi values from both original and remainder
loop.
In this process, we lookup the VMap for the mapped incoming phi values,
but did not update the VMap if a default entry was generated in the VMap
during the lookup. This default value is generated when constants or
values outside the current loop are looked up.
This patch fixes the assertion failure when null entries are present in
the VMap because of this lookup. Added a testcase that showcases the
problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313358 91177308-0d34-0410-b5e6-96231b3b80d8
Debug information can be, and was, corrupted when the runtime
remainder loop was fully unrolled. This is because a !null node can
be created instead of a unique one describing the loop. In this case,
the original node gets incorrectly updated with the NewLoopID
metadata.
In the case when the remainder loop is going to be quickly fully
unrolled, there isn't the need to add loop metadata for it anyway.
Differential Revision: https://reviews.llvm.org/D37338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312471 91177308-0d34-0410-b5e6-96231b3b80d8
On some targets, the penalty of executing runtime unrolling checks
and then not the unrolled loop can be significantly detrimental to
performance. This results in the need to be more conservative with
the unroll count, keeping a trip count of 2 reduces the overhead as
well as increasing the chance of the unrolled body being executed. But
being conservative leaves performance gains on the table.
This patch enables the unrolling of the remainder loop introduced by
runtime unrolling. This can help reduce the overhead of misunrolled
loops because the cost of non-taken branches is much less than the
cost of the backedge that would normally be executed in the remainder
loop. This allows larger unroll factors to be used without suffering
performance loses with smaller iteration counts.
Differential Revision: https://reviews.llvm.org/D36309
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310824 91177308-0d34-0410-b5e6-96231b3b80d8
Separated out the profitability from the safety analysis for multiexit
loop unrolling. Currently, this is an NFC because profitability is true
only if the unroll-runtime-multi-exit is set to true (off-by-default).
This is to ease adding the profitability heuristic up for review at
D35380.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308753 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When we runtime unroll with multiple exit blocks, we also need to update the
immediate dominators of the immediate successors of the exit blocks.
Reviewers: reames, mkuper, mzolotukhin, apilipenko
Reviewed by: mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35304
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307909 91177308-0d34-0410-b5e6-96231b3b80d8
Refactored the code and separated out a function
`canSafelyUnrollMultiExitLoop` to reduce redundant checks and make it
easier to add profitability heuristics later.
Added tests to runtime unrolling to make sure that unrolling for
multi-exit loops is not done unless the option
-unroll-runtime-multi-exit is true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307843 91177308-0d34-0410-b5e6-96231b3b80d8
The loop structure for the outer loop does not contain the epilog
preheader when we try to unroll inner loop with multiple exits and
epilog code is generated. For now, we just bail out in such cases.
Added a test case that shows the problem. Without this bailout, we would
trip on assert saying LCSSA form is incorrect for outer loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307676 91177308-0d34-0410-b5e6-96231b3b80d8
When unrolling under multiple exits which is under off-by-default option,
the assert that checks for VMap entry in loop exit values is too strong.
(assert if VMap entry did not exist, the value should be a
constant). However, values derived from
constants or from values outside loop, does not have a VMap entry too.
Removed the assert and added a testcase showcasing the property for
non-constant values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307542 91177308-0d34-0410-b5e6-96231b3b80d8
With the NFC refactoring in rL307417 (git SHA 987dd01), all the logic
is in place to support multiple exit/exiting blocks when prolog
remainder is generated.
This patch removed the assert that multiple exit blocks unrolling is only
supported when epilog remainder is generated.
Also, added test runs and checks with PROLOG prefix in
runtime-loop-multiple-exits.ll test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307435 91177308-0d34-0410-b5e6-96231b3b80d8
Minor refactoring to use the preexisting loop exit that's already
calculated. We do not need to recompute the loop exit in ConnectProlog.
Apart from avoiding redundant computation, this is required for
supporting multiple loop exits when Prolog remainder loops are generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307417 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we do not support multiple exiting blocks to the
latch exit block. However, this bailout wasn't triggered when we had a
unique exit block (which is the latch exit), with multiple exiting
blocks to that unique exit.
Moved the bailout so that it's triggered in both cases and added
testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307291 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Runtime unrolling is done for loops with a single exit block and a
single exiting block (and this exiting block should be the latch block).
This patch adds logic to support unrolling in the presence of multiple exit
blocks (which also means multiple exiting blocks).
Currently this is under an off-by-default option and is supported when
epilog code is generated. Support in presence of prolog code will be in
a future patch (we just need to add more tests, and update comments).
This patch is essentially an implementation patch. I have not added any
heuristic (in terms of branches added or code size) to decide when
this should be enabled.
Reviewers: mkuper, sanjoy, reames, evstupac
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33001
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306846 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of getBackEdgeTakenCount, use getExitCount on the latch exiting block
(which is proven to be the only exiting block in the loop to be unrolled).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306410 91177308-0d34-0410-b5e6-96231b3b80d8
The single exit block allowed in runtime unrolling is guaranteed to be
the Latch's successor, so rename it as LatchExitBlock.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306105 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Cloning basic blocks in the loop for runtime loop unroller depends on loop being
in rotated form (i.e. loop latch target is the exit block).
Assert that this is true, so that callers of runtime loop unroller pass in
canonical loops.
The single caller of this function has that check recently added:
https://reviews.llvm.org/rL301239
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302058 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
rL293124 added the necessary infrastructure to properly add the cloned
top level loop to LoopInfo, which means we do not have to do it manually
in CloneLoopBlocks.
@mkuper sorry for not pointing this out during my review of D29156, I just
realized that today.
Reviewers: mzolotukhin, chandlerc, mkuper
Reviewed By: mkuper
Subscribers: llvm-commits, mkuper
Differential Revision: https://reviews.llvm.org/D29173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293615 91177308-0d34-0410-b5e6-96231b3b80d8
Even when we don't create a remainder loop (that is, when we unroll by 2), we
may duplicate nested loops into the remainder. This is complicated by the fact
the remainder may itself be either inserted into an outer loop, or at the top
level. In the latter case, we may need to create new top-level loops.
Differential Revision: https://reviews.llvm.org/D29156
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293124 91177308-0d34-0410-b5e6-96231b3b80d8
Mostly straightforward changes; we just didn't do the computation before.
One sort of interesting change in LoopUnroll.cpp: we weren't handling
dominance for children of the loop latch correctly, but
foldBlockIntoPredecessor hid the problem for complete unrolling.
Currently punting on loop peeling; made some minor changes to isolate
that problem to LoopUnrollPeel.cpp.
Adds a flag -unroll-verify-domtree; it verifies the domtree immediately
after we finish updating it. This is on by default for +Asserts builds.
Differential Revision: https://reviews.llvm.org/D28073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292447 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes Transforms/LoopUnroll/runtime-loop3.ll which failed with
EXTENSIVE_DEBUG, because the cloned basic blocks were not added to the
correct sub-loops in LoopUnrollRuntime.cpp.
Reviewers: dexonsmith, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291619 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When cloning blocks for prologue/epilogue we need to replicate the loop
structure from the original loop. It wasn't a problem for the innermost
loops, but it led to an incorrect loop info when we unrolled a loop with
a child loop - in this case created prologue-loop had a child loop, but
loop info didn't reflect that.
This fixes PR28888.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits, silvas
Differential Revision: https://reviews.llvm.org/D24203
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280901 91177308-0d34-0410-b5e6-96231b3b80d8
when unroll runtime iteration loop.
In llvm::UnrollRuntimeLoopRemainder, if the loop to be unrolled is the inner
loop inside a loop nest, the scalar evolution needs to be dropped for its
parent loop which is done by ScalarEvolution::forgetLoop. However, we can
postpone forgetLoop to the end of UnrollRuntimeLoopRemainder so TripCountSC
expansion can still reuse existing value.
Differential Revision: https://reviews.llvm.org/D23572
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279748 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It is incorrect to compare TripCount (which is BECount + 1)
with extraiters (or Count) to check if we should enter unrolled
loop or not, because TripCount can potentially overflow
(when BECount is max unsigned integer).
While comparing BECount with (Count - 1) is overflow safe and
therefore correct.
Reviewer: hfinkel
Differential Revision: http://reviews.llvm.org/D19256
From: Evgeny Stupachenko <evstupac@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267662 91177308-0d34-0410-b5e6-96231b3b80d8
