Summary:
Reversed loads are handled as gathering. But we can just reshuffle
these values. Patch adds support for vectorization of reversed loads.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325134 91177308-0d34-0410-b5e6-96231b3b80d8
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325102 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For better vectorization result we should take into consideration the
cost of the user insertelement instructions when we try to
vectorize sequences that build the whole vector. I.e. if we have the
following scalar code:
```
<Scalar code>
insertelement <ScalarCode>, ...
```
we should consider the cost of the last `insertelement ` instructions as
the cost of the scalar code.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42657
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324893 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If -pass-remarks=loop-vectorize, atomic ops will be seen by
analyzeInterleaving(), even though canVectorizeMemory() == false. This
is because we are requesting extra analysis instead of bailing out.
In such a case, we end up with a Group in both Load- and StoreGroups,
and then we'll try to access freed memory when traversing LoadGroups after having had released the Group when iterating over StoreGroups.
The fix is to include mayWriteToMemory() when validating that two
instructions are the same kind of memory operation.
Reviewers: mssimpso, davidxl
Reviewed By: davidxl
Subscribers: hsaito, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D43064
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Loops with inequality comparers, such as:
// unsigned bound
for (unsigned i = 1; i < bound; ++i) {...}
have getSmallConstantMaxTripCount report a large maximum static
trip count - in this case, 0xffff fffe. However, profiling info
may show that the trip count is much smaller, and thus
counter-recommend vectorization.
This change:
- flips loop-vectorize-with-block-frequency on by default.
- validates profiled loop frequency data supports vectorization,
when static info appears to not counter-recommend it. Absence
of profile data means we rely on static data, just as we've
done so far.
Reviewers: twoh, mkuper, davidxl, tejohnson, Ayal
Reviewed By: davidxl
Subscribers: bkramer, llvm-commits
Differential Revision: https://reviews.llvm.org/D42946
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324543 91177308-0d34-0410-b5e6-96231b3b80d8
The type-shrinking logic in reduction detection, although narrow in scope, is
also rather ad-hoc, which has led to bugs (e.g., PR35734). This patch modifies
the approach to rely on the demanded bits and value tracking analyses, if
available. We currently perform type-shrinking separately for reductions and
other instructions in the loop. Long-term, we should probably think about
computing minimal bit widths in a more complete way for the loops we want to
vectorize.
PR35734
Differential Revision: https://reviews.llvm.org/D42309
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324195 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323662 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323530 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323441 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323430 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323348 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the same value is going to be vectorized several times in the same
tree entry, this entry is considered to be a gather entry and cost of
this gather is counter as cost of InsertElementInstrs for each gathered
value. But we can consider these elements as ShuffleInstr with
SK_PermuteSingle shuffle kind.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323246 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the vectorized tree has truncate to minimum required bit width and
the vector type of the cast operation after the truncation is the same
as the vector type of the cast operands, count cost of the vector cast
operation as 0, because this cast will be later removed.
Also, if the vectorization tree root operations are integer cast operations, do not consider them as candidates for truncation. It will just create extra number of the same vector/scalar operations, which will be removed by instcombiner.
Reviewers: RKSimon, spatel, mkuper, hfinkel, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322946 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Sometimes vectorization of insertelement instructions with extractelement operands may produce an extra shuffle operation, if these operands are in the reverse order. Patch tries to improve this situation by the reordering of the operands to remove this extra shuffle operation.
Reviewers: mkuper, hfinkel, RKSimon, spatel
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D33954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322579 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This method is supposed to be called for IVs that have casts in their use-def
chains that are completely ignored after vectorization under PSE. However, for
truncates of such IVs the same InductionDescriptor is used during
creation/widening of both original IV based on PHINode and new IV based on
TruncInst.
This leads to unintended second call to recordVectorLoopValueForInductionCast
with a VectorLoopVal set to the newly created IV for a trunc and causes an
assert due to attempt to store new information for already existing entry in the
map. This is wrong and should not be done.
Fixes PR35773.
Reviewers: dorit, Ayal, mssimpso
Reviewed By: dorit
Subscribers: RKSimon, dim, dcaballe, hsaito, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D41913
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322473 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes the bug with incorrect handling of InsertValue|InsertElement
instrucions in SLP vectorizer. Currently, we may use incorrect
ExtractElement instructions as the operands of the original
InsertValue|InsertElement instructions.
Reviewers: mkuper, hfinkel, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321994 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the vectorized value is marked as extra reduction argument, its users
are not considered as external users. Patch fixes this.
Reviewers: mkuper, hfinkel, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41786
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321993 91177308-0d34-0410-b5e6-96231b3b80d8
The approach was never discussed, I wasn't able to reproduce this
non-determinism, and the original author went AWOL.
After a discussion on the ML, Philip suggested to revert this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321974 91177308-0d34-0410-b5e6-96231b3b80d8
Another small step forward to move VPlan stuff outside of LoopVectorize.cpp.
VPlanBuilder.h is renamed to LoopVectorizationPlanner.h
LoopVectorizationPlanner class is moved from LoopVectorize.cpp to
LoopVectorizationPlanner.h LoopVectorizationCostModel::VectorizationFactor
class is moved to LoopVectorizationPlanner.h (used by the planner class) ---
this needs further streamlining work in later patches and thus all I did was
take it out of the CostModel class and moved to the header file. The callback
function had to stay inside LoopVectorize.cpp since it calls an
InnerLoopVectorizer member function declared in it. Next Steps: Make
InnerLoopVectorizer, LoopVectorizationCostModel, and other classes more modular
and more aligned with VPlan direction, in small increments.
Previous step was: r320900 (https://reviews.llvm.org/D41045)
Patch by Hideki Saito, thanks!
Differential Revision: https://reviews.llvm.org/D41420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321962 91177308-0d34-0410-b5e6-96231b3b80d8
canVectorize is only checking if the loop has a normalized pre-header if DoExtraAnalysis is true.
This doesn't make sense to me because reporting analysis information shouldn't alter legality
checks. This is probably the result of a last minute minor change before committing (?).
Patch by Diego Caballero.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D40973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321172 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to the original scalar loop during LV code gen cause the return value
of Legal->isConsecutivePtr() to be inconsistent with the return value during
legal/cost phases (further analysis and information of the bug is in D39346).
This patch is an alternative fix to PR34965 following the CM_Widen approach
proposed by Ayal and Gil in D39346. It extends InstWidening enum with
CM_Widen_Reverse to properly record the widening decision for consecutive
reverse memory accesses and, consequently, get rid of the
Legal->isConsetuviePtr() call in LV code gen. I think this is a simpler/cleaner
solution to PR34965 than the one in D39346.
Fixes PR34965.
Patch by Diego Caballero, thanks!
Differential Revision: https://reviews.llvm.org/D40742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320913 91177308-0d34-0410-b5e6-96231b3b80d8
This is a small step forward to move VPlan stuff to where it should belong (i.e., VPlan.*):
1. VP*Recipe classes in LoopVectorize.cpp are moved to VPlan.h.
2. Many of VP*Recipe::print() and execute() definitions are still left in
LoopVectorize.cpp since they refer to things declared in LoopVectorize.cpp. To
be moved to VPlan.cpp at a later time.
3. InterleaveGroup class is moved from anonymous namespace to llvm namespace.
Referencing it in anonymous namespace from VPlan.h ended up in warning.
Patch by Hideki Saito, thanks!
Differential Revision: https://reviews.llvm.org/D41045
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320900 91177308-0d34-0410-b5e6-96231b3b80d8
In SLPVectorizer, the vector build instructions (insertvalue for aggregate type) is passed to BoUpSLP.buildTree, it is treated as UserIgnoreList, so later in cost estimation, the cost of these instructions are not counted.
For aggregate value, later usage are more likely to be done in scalar registers, either used as individual scalars or used as a whole for function call or return value. Ignore scalar extraction instructions may cause too aggressive vectorization for aggregate values, and slow down performance. So for vectorization of aggregate value, the scalar extraction instructions are required in cost estimation.
Differential Revision: https://reviews.llvm.org/D41139
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320736 91177308-0d34-0410-b5e6-96231b3b80d8
D30041 extended SCEVPredicateRewriter to improve handling of Phi nodes whose
update chain involves casts; PSCEV can now build an AddRecurrence for some
forms of such phi nodes, under the proper runtime overflow test. This means
that we can identify such phi nodes as an induction, and the loop-vectorizer
can now vectorize such inductions, however inefficiently. The vectorizer
doesn't know that it can ignore the casts, and so it vectorizes them.
This patch records the casts in the InductionDescriptor, so that they could
be marked to be ignored for cost calculation (we use VecValuesToIgnore for
that) and ignored for vectorization/widening/scalarization (i.e. treated as
TriviallyDead).
In addition to marking all these casts to be ignored, we also need to make
sure that each cast is mapped to the right vector value in the vector loop body
(be it a widened, vectorized, or scalarized induction). So whenever an
induction phi is mapped to a vector value (during vectorization/widening/
scalarization), we also map the respective cast instruction (if exists) to that
vector value. (If the phi-update sequence of an induction involves more than one
cast, then the above mapping to vector value is relevant only for the last cast
of the sequence as we allow only the "last cast" to be used outside the
induction update chain itself).
This is the last step in addressing PR30654.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320672 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch tries to vectorize loads of consecutive memory accesses, accessed
in non-consecutive or jumbled way. An earlier attempt was made with patch D26905
which was reverted back due to some basic issue with representing the 'use mask' of
jumbled accesses.
This patch fixes the mask representation by recording the 'use mask' in the usertree entry.
Change-Id: I9fe7f5045f065d84c126fa307ef6ebe0787296df
Reviewers: mkuper, loladiro, Ayal, zvi, danielcdh
Reviewed By: Ayal
Subscribers: mgrang, dcaballe, hans, mzolotukhin
Differential Revision: https://reviews.llvm.org/D36130
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320548 91177308-0d34-0410-b5e6-96231b3b80d8
It causes builds to fail with "Instruction does not dominate all uses" (PR35497).
> Patch tries to improve vectorization of the following code:
>
> void add1(int * __restrict dst, const int * __restrict src) {
> *dst++ = *src++;
> *dst++ = *src++ + 1;
> *dst++ = *src++ + 2;
> *dst++ = *src++ + 3;
> }
> Allows to vectorize even if the very first operation is not a binary add, but just a load.
>
> Fixed issues related to previous commit.
>
> Reviewers: spatel, mzolotukhin, mkuper, hfinkel, RKSimon, filcab, ABataev
>
> Reviewed By: ABataev, RKSimon
>
> Subscribers: llvm-commits, RKSimon
>
> Differential Revision: https://reviews.llvm.org/D28907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319550 91177308-0d34-0410-b5e6-96231b3b80d8
Patch tries to improve vectorization of the following code:
void add1(int * __restrict dst, const int * __restrict src) {
*dst++ = *src++;
*dst++ = *src++ + 1;
*dst++ = *src++ + 2;
*dst++ = *src++ + 3;
}
Allows to vectorize even if the very first operation is not a binary add, but just a load.
Fixed issues related to previous commit.
Reviewers: spatel, mzolotukhin, mkuper, hfinkel, RKSimon, filcab, ABataev
Reviewed By: ABataev, RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D28907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319531 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
First step in adding MemorySSA as dependency for loop pass manager.
Adding the dependency under a flag.
New pass manager: MSSA pointer in LoopStandardAnalysisResults can be null.
Legacy and new pass manager: Use cl::opt EnableMSSALoopDependency. Disabled by default.
Reviewers: sanjoy, davide, gberry
Subscribers: mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D40274
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318772 91177308-0d34-0410-b5e6-96231b3b80d8
properlyDominates() shouldn't be used as sort key. It causes different output between stdlibc++ and libc++.
Instead, I introduced RPOT. In most cases, it works for CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318743 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new abstraction layer to VPlan and leverages it to model the planned
instructions that manipulate masks (AND, OR, NOT), introduced during predication.
The new VPValue and VPUser classes model how data flows into, through and out
of a VPlan, forming the vertices of a planned Def-Use graph. The new
VPInstruction class is a generic single-instruction Recipe that models a
planned instruction along with its opcode, operands and users. See
VectorizationPlan.rst for more details.
Differential Revision: https://reviews.llvm.org/D38676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318645 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added more remarks to SLP pass, in particular "missed" optimization remarks.
Also proposed several tests for new functionality.
Patch by Vladimir Miloserdov!
For reference you may look at: https://reviews.llvm.org/rL302811
Reviewers: anemet, fhahn
Reviewed By: anemet
Subscribers: javed.absar, lattner, petecoup, yakush, llvm-commits
Differential Revision: https://reviews.llvm.org/D38367
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318307 91177308-0d34-0410-b5e6-96231b3b80d8
It crashes building sqlite; see reply on the llvm-commits thread.
> [SLPVectorizer] Failure to beneficially vectorize 'copyable' elements in integer binary ops.
>
> Patch tries to improve vectorization of the following code:
>
> void add1(int * __restrict dst, const int * __restrict src) {
> *dst++ = *src++;
> *dst++ = *src++ + 1;
> *dst++ = *src++ + 2;
> *dst++ = *src++ + 3;
> }
> Allows to vectorize even if the very first operation is not a binary add, but just a load.
>
> Fixed issues related to previous commit.
>
> Reviewers: spatel, mzolotukhin, mkuper, hfinkel, RKSimon, filcab, ABataev
>
> Reviewed By: ABataev, RKSimon
>
> Subscribers: llvm-commits, RKSimon
>
> Differential Revision: https://reviews.llvm.org/D28907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318239 91177308-0d34-0410-b5e6-96231b3b80d8
Patch tries to improve vectorization of the following code:
void add1(int * __restrict dst, const int * __restrict src) {
*dst++ = *src++;
*dst++ = *src++ + 1;
*dst++ = *src++ + 2;
*dst++ = *src++ + 3;
}
Allows to vectorize even if the very first operation is not a binary add, but just a load.
Fixed issues related to previous commit.
Reviewers: spatel, mzolotukhin, mkuper, hfinkel, RKSimon, filcab, ABataev
Reviewed By: ABataev, RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D28907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318193 91177308-0d34-0410-b5e6-96231b3b80d8
Alexey Bataev