SUMMARY
This patch adds a verification check on the abbreviation declarations in the .debug_abbrev section.
The check makes sure that no abbreviation declaration has more than one attributes with the same name.
Differential Revision: https://reviews.llvm.org/D35643
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308579 91177308-0d34-0410-b5e6-96231b3b80d8
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308543 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch modifies the handleDebugInfo() function so that we verify the contents of each unit
in the .debug_info section only if its header has been successfully verified.
This change will allow for more/different verification checks depending on the type of the unit since from
dwarf5, the .debug_info section may consist of different types of units.
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D35521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308245 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds verification checks for the unit header chain in the .debug_info section.
Specifically, for each unit in the .debug_info section, the verifier checks that:
The unit length is valid (i.e. the unit can actually fit in the .debug_info section)
The dwarf version of the unit is valid
The address size is valid (4 or 8)
The unit type (if the unit is in dwarf5) is valid
The debug_abbrev_offset is valid
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307975 91177308-0d34-0410-b5e6-96231b3b80d8
Doing so is leaking an implementation detail.
I have an implementation that uses the lld infrastructure and doesn't
use a map or object::SectionRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307846 91177308-0d34-0410-b5e6-96231b3b80d8
Variable was called 'Name' and contained text
name of relocation type. Problem was that
outside of this error handling scope we already
have different 'Name' variable that contains
section name.
Change helps to avoid confusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307530 91177308-0d34-0410-b5e6-96231b3b80d8
Requires callers to directly associate relocations with a DataExtractor
used to read data from a DWARF section, which helps a callee not make
assumptions about which section it is reading.
This is the next step in reducing DWARFFormValue's dependence on DWARFUnit.
Differential Revision: https://reviews.llvm.org/D34704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306699 91177308-0d34-0410-b5e6-96231b3b80d8
Because of mistake introduced in r306517,
wrong variable ("name" instead of "Name") was used
in error message.
As a result it reported section name instead of
relocation name.
This file still needs cleanup to match LLVM coding style
and more tests I think.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306677 91177308-0d34-0410-b5e6-96231b3b80d8
With fix in include folder character case:
#include "llvm/Codegen/AsmPrinter.h" -> #include "llvm/CodeGen/AsmPrinter.h"
Original commit message:
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306517 91177308-0d34-0410-b5e6-96231b3b80d8
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306512 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304844 91177308-0d34-0410-b5e6-96231b3b80d8
With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304078 91177308-0d34-0410-b5e6-96231b3b80d8
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304002 91177308-0d34-0410-b5e6-96231b3b80d8
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303983 91177308-0d34-0410-b5e6-96231b3b80d8
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303978 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303532 91177308-0d34-0410-b5e6-96231b3b80d8
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303331 91177308-0d34-0410-b5e6-96231b3b80d8
RelocAddrMap was a pair of <width, address>, where width is relocation size (4/8/x, x < 8),
and width field was never used in code.
Relocations proccessing loop had checks for width field. Does not look like DWARF parser
should do that. There is probably no much sense to validate relocations during proccessing
them in parser.
Patch removes relocation's width relative code from DWARFContext.
Differential revision: https://reviews.llvm.org/D33194
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303251 91177308-0d34-0410-b5e6-96231b3b80d8
I am working on a speedup of building .gdb_index in LLD and
noticed that relocations that are proccessed in DWARFContextInMemory often uses
the same symbol in a row. This patch introduces caching to reduce the relocations
proccessing time.
For benchmark,
I took debug LLC binary objects configured with -ggnu-pubnames and linked it using LLD.
Link time without --gdb-index is about 4,45s.
Link time with --gdb-index: a) Without patch: 19,16s b) With patch: 15,52s
That means time spent on --gdb-index in this configuration is
19,16s - 4,45s = 14,71s (without patch) vs 15,52s - 4,45s = 11,07s (with patch).
Differential revision: https://reviews.llvm.org/D31136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303051 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-dwarfdump currently prints no message if decompression fails
for some reason. I noticed that during work on one of LLD patches
where LLD produced an broken output. It was a bit confusing to see
no output for section dumped and no any error message at all.
Patch adds error message for such cases.
Differential revision: https://reviews.llvm.org/D32865
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302221 91177308-0d34-0410-b5e6-96231b3b80d8
Adrian requested we create a DWARFVerifier.cpp file to contain all of the DWARF verification stuff. This change simply moves the functionality over into DWARFVerifier.h and DWARFVerifier.cpp, renames the DWARFVerifier methods to start with lower case, and switches DWARFContext.cpp over to using the new functionality.
Differential Revision: https://reviews.llvm.org/D32809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302044 91177308-0d34-0410-b5e6-96231b3b80d8
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301984 91177308-0d34-0410-b5e6-96231b3b80d8
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301971 91177308-0d34-0410-b5e6-96231b3b80d8
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301844 91177308-0d34-0410-b5e6-96231b3b80d8
