ObjectLinkingLayer::Plugin provides event notifications when objects are loaded,
emitted, and removed. It also provides a modifyPassConfig callback that allows
plugins to modify the JITLink pass configuration.
This patch moves eh-frame registration into its own plugin, and teaches
llvm-jitlink to only add that plugin when performing execution runs on
non-Windows platforms. This should allow us to re-enable the test case that was
removed in r359198.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359357 91177308-0d34-0410-b5e6-96231b3b80d8
When failing materialization of a symbol X, remove X from the dependants list
of any of X's dependencies. This ensures that when X's dependencies are
emitted (or fail themselves) they do not try to access the no-longer-existing
MaterializationInfo for X.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359252 91177308-0d34-0410-b5e6-96231b3b80d8
Frame Descriptor Entries (FDEs) have a pointer back to a Common Information
Entry (CIE) that describes how the rest FDE should be parsed. JITLink had been
assuming that FDEs always referred to the most recent CIE encountered, but the
spec allows them to point back to any previously encountered CIE. This patch
fixes JITLink to look up the correct CIE for the FDE.
The testcase is a MachO binary with an FDE that refers to a CIE that is not the
one immediately proceeding it (the layout can be viewed wit
'dwarfdump --eh-frame <testcase>'. This test case had to be a binary as llvm-mc
now sorts FDEs (as of r356216) to ensure FDEs *do* point to the most recent CIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359105 91177308-0d34-0410-b5e6-96231b3b80d8
Section atoms are not sorted, so we need to scan the whole section to find the
start address.
No test case: Found by inspection, and any reproduction would depend on pointer
ordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358865 91177308-0d34-0410-b5e6-96231b3b80d8
The error check required FDEs to refer to the most recent CIE, but the eh-frame
spec allows them to refer to any previously seen CIE. This patch removes the
offending check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358840 91177308-0d34-0410-b5e6-96231b3b80d8
Knowing the address/symbolnum field values makes it easier to identify the
unsupported relocation, and provides enough information for the full bit
pattern of the relocation to be reconstructed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358833 91177308-0d34-0410-b5e6-96231b3b80d8
The extra information here will be helpful in diagnosing errors, like the
ones currently occuring on the PPC big-endian bots. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358826 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
JITLink is a jit-linker that performs the same high-level task as RuntimeDyld:
it parses relocatable object files and makes their contents runnable in a target
process.
JITLink aims to improve on RuntimeDyld in several ways:
(1) A clear design intended to maximize code-sharing while minimizing coupling.
RuntimeDyld has been developed in an ad-hoc fashion for a number of years and
this had led to intermingling of code for multiple architectures (e.g. in
RuntimeDyldELF::processRelocationRef) in a way that makes the code more
difficult to read, reason about, extend. JITLink is designed to isolate
format and architecture specific code, while still sharing generic code.
(2) Support for native code models.
RuntimeDyld required the use of large code models (where calls to external
functions are made indirectly via registers) for many of platforms due to its
restrictive model for stub generation (one "stub" per symbol). JITLink allows
arbitrary mutation of the atom graph, allowing both GOT and PLT atoms to be
added naturally.
(3) Native support for asynchronous linking.
JITLink uses asynchronous calls for symbol resolution and finalization: these
callbacks are passed a continuation function that they must call to complete the
linker's work. This allows for cleaner interoperation with the new concurrent
ORC JIT APIs, while still being easily implementable in synchronous style if
asynchrony is not needed.
To maximise sharing, the design has a hierarchy of common code:
(1) Generic atom-graph data structure and algorithms (e.g. dead stripping and
| memory allocation) that are intended to be shared by all architectures.
|
+ -- (2) Shared per-format code that utilizes (1), e.g. Generic MachO to
| atom-graph parsing.
|
+ -- (3) Architecture specific code that uses (1) and (2). E.g.
JITLinkerMachO_x86_64, which adds x86-64 specific relocation
support to (2) to build and patch up the atom graph.
To support asynchronous symbol resolution and finalization, the callbacks for
these operations take continuations as arguments:
using JITLinkAsyncLookupContinuation =
std::function<void(Expected<AsyncLookupResult> LR)>;
using JITLinkAsyncLookupFunction =
std::function<void(const DenseSet<StringRef> &Symbols,
JITLinkAsyncLookupContinuation LookupContinuation)>;
using FinalizeContinuation = std::function<void(Error)>;
virtual void finalizeAsync(FinalizeContinuation OnFinalize);
In addition to its headline features, JITLink also makes other improvements:
- Dead stripping support: symbols that are not used (e.g. redundant ODR
definitions) are discarded, and take up no memory in the target process
(In contrast, RuntimeDyld supported pointer equality for weak definitions,
but the redundant definitions stayed resident in memory).
- Improved exception handling support. JITLink provides a much more extensive
eh-frame parser than RuntimeDyld, and is able to correctly fix up many
eh-frame sections that RuntimeDyld currently (silently) fails on.
- More extensive validation and error handling throughout.
This initial patch supports linking MachO/x86-64 only. Work on support for
other architectures and formats will happen in-tree.
Differential Revision: https://reviews.llvm.org/D58704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358818 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reduces the number of functions in the interface between RuntimeDyld
and RuntimeDyldChecker by combining "GetXAddress" and "GetXContent" functions
into "GetXInfo" functions that return a struct describing both the address and
content. The GetStubOffset function is also replaced with a pair of utilities,
GetStubInfo and GetGOTInfo, that fit the new scheme. For RuntimeDyld both of
these functions will return the same result, but for the new JITLink linker
(https://reviews.llvm.org/D58704) these will provide the addresses of PLT stubs
and GOT entries respectively.
For JITLink's use, a 'got_addr' utility has been added to the rtdyld-check
language, and the syntax of 'got_addr' and 'stub_addr' has been changed: both
functions now take two arguments, a 'stub container name' and a target symbol
name. For llvm-rtdyld/RuntimeDyld the stub container name is the object file
name and section name, separated by a slash. E.g.:
rtdyld-check: *{8}(stub_addr(foo.o/__text, y)) = y
For the upcoming llvm-jitlink utility, which creates stubs on a per-file basis
rather than a per-section basis, the container name is just the file name. E.g.:
jitlink-check: *{8}(got_addr(foo.o, y)) = y
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358295 91177308-0d34-0410-b5e6-96231b3b80d8
Following r354972 the Intel JIT Listener would not report line table
information because the section indices did not match. There was
a similar issue with the PerfJitEventListener. This change performs
the section index lookup when building the object address used to
query the line table information.
Differential Revision: https://reviews.llvm.org/D59490
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356895 91177308-0d34-0410-b5e6-96231b3b80d8
When running lli --debug --force-interpreter=true the executed instructions are
printed but are missing newlines. This commit adds the missing newlines.
Patch by Andrew Brown.
Differential Revision: https://reviews.llvm.org/D57806
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355587 91177308-0d34-0410-b5e6-96231b3b80d8
ELF sections allow 0 for the alignment, which is specified to
be the same as 1. However many clients do not expect this and
will behave poorly in the presence of a 0-aligned section (for
example by trying to modulo something by the section alignment).
We can be more polite by making sure that we always pass a
non-zero value to clients.
Differential Revision: https://reviews.llvm.org/D57482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352694 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tried to address the following use case.
. bcc (https://github.com/iovisor/bcc) utilizes llvm JIT to
compile for BTF target.
. with -g, .BTF and .BTF.ext sections (BPF debug info)
will be generated by LLVM.
. .BTF does not have relocations and .BTF.ext has some
relocations.
. With ProcessAllSections, .BTF.ext is loaded by JIT dynamic linker
and is available to application. But .BTF is not loaded.
The bcc application needs both .BTF.ext and .BTF for debugging
purpose, and .BTF is not loaded. This patch addressed this issue
by iterating over all sections and loading any missing
sections, after symbol/relocation processing in loadObjectImpl().
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D55943
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352432 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MemoryBlock automatically extends a requested buffer size to a
multiple of page size because (I believe) doing it was thought to be harmless
and with that you could get more memory (on average 2KiB on 4KiB-page systems)
"for free".
That programming interface turned out to be error-prone. If you request N
bytes, you usually expect that a resulting object returns N for `size()`.
That's not the case for MemoryBlock.
Looks like there is only one place where we take the advantage of
allocating more memory than the requested size. So, with this patch, I
simply removed the automatic size expansion feature from MemoryBlock
and do it on the caller side when needed. MemoryBlock now always
returns a buffer whose size is equal to the requested size.
Differential Revision: https://reviews.llvm.org/D56941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351916 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow other utilities (including a future RuntimeDyld replacement) to
use these types without pulling in the major Core types (JITDylib, etc.).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351138 91177308-0d34-0410-b5e6-96231b3b80d8
MIPS `jr` instruction uses a delay-slot. To escape execution of
arbitrary instruction we should either fill the delay-slot by `nop`
instruction or swap `jr` instruction and logically preceding
instruction. This fix implements the second method to generate a bit
more effective code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351001 91177308-0d34-0410-b5e6-96231b3b80d8
MIPS ABI states that every function must be called through jalr $t9. In
other words, a function expect that t9 register points to the beginning
of its code. A function uses this register to calculate offset to the
Global Offset Table and save it to the `gp` register.
```
lui $gp, %hi(_gp_disp)
addiu $gp, %lo(_gp_disp)
addu $gp, $gp, $t9
```
If `t9` and as a result `$gp` point to the wrong place the following code
loads incorrect value from GOT and passes control to invalid code.
```
lw $v0,%call16(foo)($gp)
jalr $t9
```
OrcMips32 and OrcMips64 writeResolverCode methods pass control to the
resolved address, but do not setup `$t9` before the call. The `t9` holds
value of the beginning of `resolver` code so any attempts to call
routines via GOT failed.
This change fixes the problem. The `OrcLazy/hidden-visibility.ll` test
starts to pass correctly. Before the change it fails on MIPS because the
`exitOnLazyCallThroughFailure` called from the resolver code could not
call libc routine `exit` via GOT.
Differential Revision: http://reviews.llvm.org/D56058
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351000 91177308-0d34-0410-b5e6-96231b3b80d8
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350835 91177308-0d34-0410-b5e6-96231b3b80d8
lldb on Windows uses the ExecutionEngine for expression evaluation
and hits the llvm_unreachable due to this relocation. Thus, implement
the relocation and add a test to verify it's function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348904 91177308-0d34-0410-b5e6-96231b3b80d8
This patch renames both methods (NotifyObjectEmitted -> notifyObjectLoaded, and
NotifyObjectFreed -> notifyObjectFreed), adds an abstract "ObjectKey" (uint64_t)
parameter to notifyObjectLoaded, and replaces the ObjectFile parameter for
notifyObjectFreed with an ObjectKey. Using an ObjectKey to track identify
events, rather than a reference to the ObjectFile, allows us to free the
ObjectFile after notifyObjectLoaded is called, saving memory.
https://reviews.llvm.org/D53773
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348223 91177308-0d34-0410-b5e6-96231b3b80d8
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346604 91177308-0d34-0410-b5e6-96231b3b80d8
Doesn't build on Windows. The call to 'lookup' is ambiguous. Clang and
MSVC agree, anyway.
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/787
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): error C2668: 'llvm::orc::ExecutionSession::lookup': ambiguous call to overloaded function
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(823): note: could be 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(llvm::ArrayRef<llvm::orc::JITDylib *>,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(817): note: or 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(const llvm::orc::JITDylibSearchList &,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): note: while trying to match the argument list '(initializer list, llvm::orc::SymbolStringPtr)'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345078 91177308-0d34-0410-b5e6-96231b3b80d8
Lang Hames