The benchmarking summarized in
http://lists.llvm.org/pipermail/llvm-dev/2017-May/113525.html showed
this is beneficial for a wide range of cores.
As is to be expected, quite a few small adaptations are needed to the
regressions tests, as the difference in scheduling results in:
- Quite a few small instruction schedule differences.
- A few changes in register allocation decisions caused by different
instruction schedules.
- A few changes in IfConversion decisions, due to a difference in
instruction schedule and/or the estimated cost of a branch mispredict.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306514 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284757 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284545 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284541 91177308-0d34-0410-b5e6-96231b3b80d8
Presently, CodeGenPrepare deletes all nearly empty (only phi and branch)
basic blocks. This pass can delete loop preheaders which frequently creates
critical edges. A preheader can be a convenient place to spill registers to
the stack. If the entrance to a loop body is a critical edge, then spills
may occur in the loop body rather than immediately before it. This patch
protects loop preheaders from deletion in CodeGenPrepare even if they are
nearly empty.
Since the patch alters the CFG, it affects a large number of test cases.
In most cases, the changes are merely cosmetic (basic blocks have different
names or instruction orders change slightly). I am somewhat concerned about
the test/CodeGen/Mips/brdelayslot.ll test case. If the loop preheader is not
deleted, then the MIPS backend does not take advantage of a branch delay
slot. Consequently, I would like some close review by a MIPS expert.
The patch also partially subsumes D16893 from George Burgess IV. George
correctly notes that CodeGenPrepare does not actually preserve the dominator
tree. I think the dominator tree was usually not valid when CodeGenPrepare
ran, but I am using LoopInfo to mark preheaders, so the dominator tree is
now always valid before CodeGenPrepare.
Author: Tom Jablin (tjablin)
Reviewers: hfinkel george.burgess.iv vkalintiris dsanders kbarton cycheng
http://reviews.llvm.org/D16984
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265397 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
opportunities that only present themselves after late optimizations
such as tail duplication .e.g.
## BB#1:
movl %eax, %ecx
movl %ecx, %eax
ret
The register allocator also leaves some of them around (due to false
dep between copies from phi-elimination, etc.)
This required some changes in codegen passes. Post-ra scheduler and the
pseudo-instruction expansion passes have been moved after branch folding
and tail merging. They were before branch folding before because it did
not always update block livein's. That's fixed now. The pass change makes
independently since we want to properly schedule instructions after
branch folding / tail duplication.
rdar://10428165
rdar://10640363
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147716 91177308-0d34-0410-b5e6-96231b3b80d8
