Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371284 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369013 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352827 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit f47d6b38c7a61d50db4566b02719de05492dcef1 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352800 91177308-0d34-0410-b5e6-96231b3b80d8
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352791 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r348203 and reapplies D55085 with an additional
GCOV bugfix to make the change NFC for relative file paths in .gcno files.
Thanks to Ilya Biryukov for additional testing!
Original commit message:
Update Diagnostic handling for changes in CFE.
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348512 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r348203.
Reason: this produces absolute paths in .gcno files, breaking us
internally as we rely on them being consistent with the filenames passed
in the command line.
Also reverts r348157 and r348155 to account for revert of r348154 in
clang repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348279 91177308-0d34-0410-b5e6-96231b3b80d8
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
This fixes the GCOV tests in compiler-rt that were broken by the Clang
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348203 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When making code coverage, a lot of files (like the ones coming from /usr/include) are removed when post-processing gcno/gcda so finally they doen't need to be instrumented nor to appear in gcno/gcda.
The goal of the patch is to be able to filter the files we want to instrument, there are several advantages to do that:
- improve speed (no overhead due to instrumentation on files we don't care)
- reduce gcno/gcda size
- it gives the possibility to easily instrument only few files (e.g. ones modified in a patch) without changing the build system
- need to accept this patch to be enabled in clang: https://reviews.llvm.org/D52034
Reviewers: marco-c, vsk
Reviewed By: marco-c
Subscribers: llvm-commits, sylvestre.ledru
Differential Revision: https://reviews.llvm.org/D52033
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346641 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is replacement for patch in https://reviews.llvm.org/D49460.
When we fork, the counters are duplicate as they're and so the values are finally wrong when writing gcda for parent and child.
So just before to fork, we flush the counters and so the parent and the child have new counters set to zero.
For exec** functions, we need to flush before the call to have some data.
Reviewers: vsk, davidxl, marco-c
Reviewed By: marco-c
Subscribers: llvm-commits, sylvestre.ledru, marco-c
Differential Revision: https://reviews.llvm.org/D53593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346313 91177308-0d34-0410-b5e6-96231b3b80d8
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344502 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Right now there is no hit counter on the line of function.
So the idea is add the line of the function to all the lines covered by the entry block.
Tests in compiler-rt/profile will be fixed in another patch: https://reviews.llvm.org/D49854
Reviewers: marco-c, davidxl
Reviewed By: marco-c
Subscribers: sylvestre.ledru, llvm-commits
Differential Revision: https://reviews.llvm.org/D49853
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344228 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few leftovers in rL343163 which span two lines. This commit
changes these llvm::sort(C.begin(), C.end, ...) to llvm::sort(C, ...)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343426 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342631 91177308-0d34-0410-b5e6-96231b3b80d8
Right now, the counters are added in regards of the number of successors
for a given BasicBlock: it's good when we've only 1 or 2 successors (at
least with BranchInstr). But in the case of a switch statement, the
BasicBlock after switch has several predecessors and we need know from
which BB we're coming from.
So the idea is to revert what we're doing: add a PHINode in each block
which will select the counter according to the incoming BB. They're
several pros for doing that:
- we fix the "switch" bug
- we remove the function call to "__llvm_gcov_indirect_counter_increment"
and the lookup table stuff
- we replace by PHINodes, so the optimizer will probably makes a better
job.
Patch by calixte!
Differential Revision: https://reviews.llvm.org/D51619
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341977 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm_gcov_... routines in compiler-rt are regular C functions that
need to be called using the proper C ABI for the target. The current
code simply calls them using plain LLVM IR types. Since the type are
mostly simple, this happens to just work on certain targets. But other
targets still need special handling; in particular, it may be necessary
to sign- or zero-extended sub-word values to comply with the ABI. This
caused gcov failures on SystemZ in particular.
Now the very same problem was already fixed for the llvm_profile_ calls
here: https://reviews.llvm.org/D21736
This patch uses the same method to fix the llvm_gcov_ calls, in
particular calls to llvm_gcda_start_file, llvm_gcda_emit_function, and
llvm_gcda_emit_arcs.
Reviewed By: marco-c
Differential Revision: https://reviews.llvm.org/D49134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336692 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Add wasm personality function
- Re-categorize the existing `isFuncletEHPersonality()` function into
two different functions: `isFuncletEHPersonality()` and
`isScopedEHPersonality(). This becomes necessary as wasm EH uses scoped
EH instructions (catchswitch, catchpad/ret, and cleanuppad/ret) but not
outlined funclets.
- Changed some callsites of `isFuncletEHPersonality()` to
`isScopedEHPersonality()` if they are related to scoped EH IR-level
stuff.
Reviewers: majnemer, dschuff, rnk
Subscribers: jfb, sbc100, jgravelle-google, eraman, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332667 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Prior to this change, LLVM would in some cases emit *massive* writeout
functions with many 10s of 1000s of function calls in straight-line
code. This is a very wasteful way to represent what are fundamentally
loops and creates a number of scalability issues. Among other things,
register allocating these calls is extremely expensive. While D46127 makes this
less severe, we'll still run into scaling issues with this eventually. If not
in the compile time, just from the code size.
Now the pass builds up global data structures modeling the inputs to
these functions, and simply loops over the data structures calling the
relevant functions with those values. This ensures that the code size is
a fixed and only data size grows with larger amounts of coverage data.
A trivial change to IRBuilder is included to make it easier to build
the constants that make up the global data.
Reviewers: wmi, echristo
Subscribers: sanjoy, mcrosier, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46357
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331407 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kcc, pcc, danielcdh, jmolloy, sanjoy, dberlin, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D45142
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330059 91177308-0d34-0410-b5e6-96231b3b80d8
-fprofile-dir=path allows the user to specify where .gcda files should be
emitted when the program is run. In particular, this is the first flag that
causes the .gcno and .o files to have different paths, LLVM is extended to
support this. -fprofile-dir= does not change the file name in the .gcno (and
thus where lcov looks for the source) but it does change the name in the .gcda
(and thus where the runtime library writes the .gcda file). It's different from
a GCOV_PREFIX because a user can observe that the GCOV_PREFIX_STRIP will strip
paths off of -fprofile-dir= but not off of a supplied GCOV_PREFIX.
To implement this we split -coverage-file into -coverage-data-file and
-coverage-notes-file to specify the two different names. The !llvm.gcov
metadata node grows from a 2-element form {string coverage-file, node dbg.cu}
to 3-elements, {string coverage-notes-file, string coverage-data-file, node
dbg.cu}. In the 3-element form, the file name is already "mangled" with
.gcno/.gcda suffixes, while the 2-element form left that to the middle end
pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280306 91177308-0d34-0410-b5e6-96231b3b80d8
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278078 91177308-0d34-0410-b5e6-96231b3b80d8
Coincidentally this function maps to the C++17 try_emplace. Rename it
for consistentcy with C++17 std::map. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276276 91177308-0d34-0410-b5e6-96231b3b80d8
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272709 91177308-0d34-0410-b5e6-96231b3b80d8
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266446 91177308-0d34-0410-b5e6-96231b3b80d8
Do not emit profile arc files and note files for module and skeleton
CU's.
Our users report seeing unexpected *.gcda and *.gcno files in their
projects when using gcov-style profiling with modules or frameworks.
The unwanted files come from these modules. This is not very helpful
for end-users. Further, we've seen reports of instrumented programs
crashing while writing these files out (due to I/O failures).
rdar://problem/22838296
Reviewed-by: aprantl
Differential Revision: http://reviews.llvm.org/D15997
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258406 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252219 91177308-0d34-0410-b5e6-96231b3b80d8
