When either instruction in a fused pair has no other dependency, besides on
the other instruction, make sure that other instructions do not get
scheduled between them. Additionally, avoid fusing an instruction more than
once along the same dependency chain.
Differential revision: https://reviews.llvm.org/D36704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320420 91177308-0d34-0410-b5e6-96231b3b80d8
This is due to PR26161 needing to be resolved before we can fix
big endian bugs like PR35359. The work to split aggregates into smaller LLTs
instead of using one large scalar will take some time, so in the mean time
we'll fall back to SDAG.
Some ARM BE tests xfailed for now as a result.
Differential Revision: https://reviews.llvm.org/D40789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320388 91177308-0d34-0410-b5e6-96231b3b80d8
At first, I tried to thread the x86 needle and use a target hook (isVectorShiftByScalarCheap())
to disable the transform only for non-splat pow-of-2 constants, but not AVX2, but only some
element types, but...it's difficult.
Here we just avoid the loop with the x86 vector transform that conflicts with the general DAG
combine and preserve all of the existing behavior AFAICT otherwise.
Some tests that will probably fail if someone does try to restrict this in a more targeted way
for x86-only may be found in:
test/CodeGen/X86/combine-mul.ll
test/CodeGen/X86/vector-mul.ll
test/CodeGen/X86/widen_arith-5.ll
This should prevent the infinite looping seen with:
https://bugs.llvm.org/show_bug.cgi?id=35579
Differential Revision: https://reviews.llvm.org/D41040
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320374 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is the first part of https://reviews.llvm.org/D40348.
In order to allow target combines to be performed on newly combined
indexed loads, add them back to the worklist. The remainder of the
above patch will be committed in subsequent revisions and will use
this. Test cases will be included with those follow-up commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320365 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preparatory step for D34515.
This change:
- makes nodes ISD::ADDCARRY and ISD::SUBCARRY legal for i32
- lowering is done by first converting the boolean value into the carry flag
using (_, C) ← (ARMISD::ADDC R, -1) and converted back to an integer value
using (R, _) ← (ARMISD::ADDE 0, 0, C). An ARMISD::ADDE between the two
operations does the actual addition.
- for subtraction, given that ISD::SUBCARRY second result is actually a
borrow, we need to invert the value of the second operand and result before
and after using ARMISD::SUBE. We need to invert the carry result of
ARMISD::SUBE to preserve the semantics.
- given that the generic combiner may lower ISD::ADDCARRY and
ISD::SUBCARRYinto ISD::UADDO and ISD::USUBO we need to update their lowering
as well otherwise i64 operations now would require branches. This implies
updating the corresponding test for unsigned.
- add new combiner to remove the redundant conversions from/to carry flags
to/from boolean values (ARMISD::ADDC (ARMISD::ADDE 0, 0, C), -1) → C
- fixes PR34045
- fixes PR34564
- fixes PR35103
Differential Revision: https://reviews.llvm.org/D35192
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320355 91177308-0d34-0410-b5e6-96231b3b80d8
Introduces the AddrFI "addressing mode", which is necessary simply because
it's not possible to write a pattern that directly matches a frameindex.
Ensure callee-saved registers are accessed relative to the stackpointer. This
is necessary as callee-saved register spills are performed before the frame
pointer is set.
Move HexagonDAGToDAGISel::isOrEquivalentToAdd to SelectionDAGISel, so we can
make use of it in the RISC-V backend.
Differential Revision: https://reviews.llvm.org/D39848
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320353 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This relaxes an assertion inside SelectionDAGBuilder which is overly
restrictive on targets which have no concept of alignment (such as AVR).
In these architectures, all types are aligned to 8-bits.
After this, LLVM will only assert that accesses are aligned on targets
which actually require alignment.
This patch follows from a discussion on llvm-dev a few months ago
http://llvm.1065342.n5.nabble.com/llvm-dev-Unaligned-atomic-load-store-td112815.html
Reviewers: bogner, nemanjai, joerg, efriedma
Reviewed By: efriedma
Subscribers: efriedma, cactus, llvm-commits
Differential Revision: https://reviews.llvm.org/D39946
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320243 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320217 91177308-0d34-0410-b5e6-96231b3b80d8
MachineSink attempts to place instructions near the basic blocks where
they are needed. Once an instruction has been sunk, its location
relative to other instructions no longer is consistent with the
original source code. In order to ensure correct stepping in the
debugger, the debug location for sunk instructions is either merged
with the insertion point or erased if the target successor block is
empty.
Originally submitted as r318679, revised to fix sanitizer failure and
improve testing.
Patch by Matthew Voss!
Differential Revision: https://reviews.llvm.org/D39933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320216 91177308-0d34-0410-b5e6-96231b3b80d8
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Add support for operand subreg index as an immediate to debug printing
and use ::print in the MIRPrinter.
Differential Review: https://reviews.llvm.org/D40965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320209 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed this pattern in D38316 / D38388. We failed to combine a shuffle that is either
repeating a scalar insertion at the same position in a vector or translated to a different
element index.
Like the earlier patch, this could be an instcombine too, but since we opted to make this
a DAG transform earlier, I've made this one a DAG patch too.
We do not need any legality checking because the new insert is identical to the existing
insert except that it may have a different constant insertion operand.
The constant insertion test in test/CodeGen/X86/vector-shuffle-combining.ll was the
motivation for D38756.
Differential Revision: https://reviews.llvm.org/D40209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320050 91177308-0d34-0410-b5e6-96231b3b80d8
We can just extend the original vector to vXi1 and trust that the legalization process will revisit it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320013 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Changed use_instructions() to use_nodbg_instructions() when
building an instruction set.
We don't want the presence of debug info to affect the code
we generate.
Reviewers: dblaikie, Eugene.Zelenko, chandlerc, aprantl
Reviewed By: aprantl
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D40882
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320010 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when creating a named section, the Wasm
frontend forces it to use `SectionKind::Data`, whereas
in fact C++ does generate code sections with custom
names.
Patch by Nicholas Wilson
Differential Revision: https://reviews.llvm.org/D40906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320002 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When calculating the RootLatency, we add up all the latencies of the
deleted instructions. But for NewRootLatency we only add the latency of
the new root instructions, ignoring the latencies of the other
instructions inserted. This leads the combiner to underestimate the cost
of patterns which add multiple instructions. This patch fixes that by
summing up the latencies of all new instructions. For NewRootNode, the
more complex getLatency function is used.
Note that we may be slightly more precise than just summing up
all latencies. For example, consider a pattern like
r1 = INS1 ..
r2 = INS2 ..
r3 = INS3 r1, r2
I think in some other places, the total latency of the pattern would be
estimated as lat(INS3) + max(lat(INS1), lat(INS2)). If you consider
that worth changing, I think it would be best to do in a follow-up
patch.
Reviewers: Gerolf, sebpop, spop, fhahn
Reviewed By: fhahn
Subscribers: evandro, llvm-commits
Differential Revision: https://reviews.llvm.org/D40307
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319951 91177308-0d34-0410-b5e6-96231b3b80d8
If the mask needs to be promoted that should occur by the legalizer detecting the mask operand needs to be promoted not as a side effect of another action.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319852 91177308-0d34-0410-b5e6-96231b3b80d8
If the mask needs to be promoted it should be handled by operand promotion after the result is legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319851 91177308-0d34-0410-b5e6-96231b3b80d8
The mask will be promoted if necessary when operands are promoted. It's possible the mask type is legal, but the setcc result type is a different. We shouldn't promote to the setcc result type unless the mask needs to be promoted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319850 91177308-0d34-0410-b5e6-96231b3b80d8
GetWidenedVector does't guarantee the widened elements are zero which would break the intended behavior of the operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319849 91177308-0d34-0410-b5e6-96231b3b80d8
The patch originally broke Chromium (crbug.com/791714) due to its failing to
specify that the new pseudo instructions clobber EFLAGS. This commit fixes
that.
> Summary: This strengthens the guard and matches MSVC.
>
> Reviewers: hans, etienneb
>
> Subscribers: hiraditya, JDevlieghere, vlad.tsyrklevich, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D40622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319824 91177308-0d34-0410-b5e6-96231b3b80d8
There's no such thing as a setcc with vector operands and scalar result. And if we're trying to widen the result we would have to already be looking at a vector result type.
So this patch renames the VSETCC function as the SETCC function and delete the original SETCC function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319799 91177308-0d34-0410-b5e6-96231b3b80d8
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D39604
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319773 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319771 91177308-0d34-0410-b5e6-96231b3b80d8
MachineRegisterInfo used to allow just one regalloc hint per virtual
register. This patch extends this to a vector of regalloc hints, which is
filled in by common code with sorted copy hints. Such hints will make for
more ID copies that can be removed.
NB! This improvement is currently (and hopefully temporarily) *disabled* by
default, except for SystemZ. The only reason for this is the big impact this
has on tests, which has unfortunately proven unmanageable. It was a long
while since all the tests were updated and just waiting for review (which
didn't happen), but now targets have to enable this themselves
instead. Several targets could get a head-start by downloading the tests
updates from the Phabricator review. Thanks to those who helped, and sorry
you now have to do this step yourselves.
This should be an improvement generally for any target!
The target may still create its own hint, in which case this has highest
priority and is stored first in the vector. If it has target-type, it will
not be recomputed, as per the previous behaviour.
The temporary hook enableMultipleCopyHints() will be removed as soon as all
targets return true.
Review: Quentin Colombet, Ulrich Weigand.
https://reviews.llvm.org/D38128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319754 91177308-0d34-0410-b5e6-96231b3b80d8
The CONCAT_VECTORS operand get its type from getSetCCResultType, but if the mask type and the setcc have different scalar sizes this creates an illegal CONCAT_VECTORS operation. The concat type should be 2x the mask type, and then an extend should be added if needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319744 91177308-0d34-0410-b5e6-96231b3b80d8
Consistently use the same parameter names as the names of the affected
fields. This avoids some unintuitive abbreviations like `isSS`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319722 91177308-0d34-0410-b5e6-96231b3b80d8
While we cannot skip the whole TwoAddressInstructionPass even for -O0
there are some parts of the pass that are currently skipped at -O0 but
not for optnone. Changing this as there is no reason to have those two
hit different code paths here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319721 91177308-0d34-0410-b5e6-96231b3b80d8
MatchRotate assumes the types of the types of LHS and RHS are equal,
which is always the case then they come from an OR node, but here
we're getting them from two different TRUNC nodes, so we have to check
the types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319695 91177308-0d34-0410-b5e6-96231b3b80d8
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319691 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move splitIndirectCriticalEdges() from CodeGenPrepare to BasicBlockUtils.h so
that it can be called from other places.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40750
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319689 91177308-0d34-0410-b5e6-96231b3b80d8
Evandro Menezes