Rather than scaling loop headers and then scaling all the loop members
by the header frequency, scale `LoopData::Scale` itself, and scale the
loop members by it. It's much more obvious what's going on this way,
and doesn't cost any extra multiplies.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207189 91177308-0d34-0410-b5e6-96231b3b80d8
Make `getPackagedNode()` a member function of
`BlockFrequencyInfoImplBase` so that it's available for templated code.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207183 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by David Blaikie in code review, a `std::list<T>` is
simpler than a `std::vector<std::unique_ptr<T>>`. Another option is a
`std::deque<T>` (which allocates in chunks), but I'd like to leave open
the option of inserting in the middle of the sequence for handling
irreducible control flow on the fly.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207177 91177308-0d34-0410-b5e6-96231b3b80d8
condition into an obviously infinite loop with an assert about the
degenerate condition. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207147 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm here: http://dl.acm.org/citation.cfm?id=177301.
The idea of isolating the roots has even more relevance when using the
stack not just to implement the DFS but also to implement the recursive
step. Because we use it for the recursive step, to isolate the roots we
need to maintain two stacks: one for our recursive DFS walk, and another
of the nodes that have been walked. The nice thing is that the latter
will be half the size. It also fixes a complete hack where we scanned
backwards over the stack to find the next potential-root to continue
processing. Now that is always the top of the DFS stack.
While this is a really nice improvement already (IMO) it further opens
the door for two important simplifications:
1) De-duplicating some of the code across the two different walks. I've
actually made the duplication a bit worse in some senses with this
patch because the two are starting to converge.
2) Dramatically simplifying the loop structures of both walks.
I wanted to do those separately as they'll be essentially *just* CFG
restructuring. This patch on the other hand actually uses different
datastructures to implement the algorithm itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207098 91177308-0d34-0410-b5e6-96231b3b80d8
applied prior to pushing a node onto the DFSStack. This is the first
step toward avoiding the stack entirely for leaf nodes. It also
simplifies things a bit and I think is pointing the way toward factoring
some more of the shared logic out of the two implementations.
It is also making it more obvious how to restructure the loops
themselves to be a bit easier to read (although no different in terms of
functionality).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207095 91177308-0d34-0410-b5e6-96231b3b80d8
a SmallPtrSet. Currently, there is no need for stable iteration in this
dimension, and I now thing there won't need to be going forward.
If this is ever re-introduced in any form, it needs to not be
a SetVector based solution because removal cannot be linear. There will
be many SCCs with large numbers of parents. When encountering these, the
incremental SCC update for intra-SCC edge removal was quadratic due to
linear removal (kind of).
I'm really hoping we can avoid having an ordering property here at all
though...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207091 91177308-0d34-0410-b5e6-96231b3b80d8
than functions. So far, this access pattern is *much* more common. It
seems likely that any user of this interface is going to have nodes at
the point that they are querying the SCCs.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207045 91177308-0d34-0410-b5e6-96231b3b80d8
values rather than an expensive dense map query to test whether children
have already been popped into an SCC. This matches the incremental SCC
building code. I've also included the assert that I put there but
updated both of their text.
No functionality changed here.
I still don't have any great ideas for sharing the code between the two
implementations, but I may try a brute-force approach to factoring it at
some point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207042 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the core functionality necessary to remove an edge from
the call graph and correctly update both the basic graph and the SCC
structure. As part of that it has to run a tiny (in number of nodes)
Tarjan-style DFS walk of an SCC being mutated to compute newly formed
SCCs, etc.
This is *very rough* and a WIP. I have a bunch of FIXMEs for code
cleanup that will reduce the boilerplate in this change substantially.
I also have a bunch of simplifications to various parts of both
algorithms that I want to make, but first I'd like to have a more
holistic picture. Ideally, I'd also like more testing. I'll probably add
quite a few more unit tests as I go here to cover the various different
aspects and corner cases of removing edges from the graph.
Still, this is, so far, successfully updating the SCC graph in-place
without disrupting the identity established for the existing SCCs even
when we do challenging things like delete the critical edge that made an
SCC cycle at all and have to reform things as a tree of smaller SCCs.
Getting this to work is really critical for the new pass manager as it
is going to associate significant state with the SCC instance and needs
it to be stable. That is also the motivation behind the return of the
newly formed SCCs. Eventually, I'll wire this all the way up to the
public API so that the pass manager can use it to correctly re-enqueue
newly formed SCCs into a fresh postorder traversal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206968 91177308-0d34-0410-b5e6-96231b3b80d8
up the stack finishing the exploration of each entries children before
we're finished in addition to accounting for their low-links. Added
a unittest that really hammers home the need for this with interlocking
cycles that would each appear distinct otherwise and crash or compute
the wrong result. As part of this, nuke a stale fixme and bring the rest
of the implementation still more closely in line with the original
algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206966 91177308-0d34-0410-b5e6-96231b3b80d8
resisted this for too long. Just with the basic testing here I was able
to exercise the analysis in more detail and sift out both type signature
bugs in the API and a bug in the DFS numbering. All of these are fixed
here as well.
The unittests will be much more important for the mutation support where
it is necessary to craft minimal mutations and then inspect the state of
the graph. There is just no way to do that with a standard FileCheck
test. However, unittesting these kinds of analyses is really quite easy,
especially as they're designed with the new pass manager where there is
essentially no infrastructure required to rig up the core logic and
exercise it at an API level.
As a minor aside about the DFS numbering bug, the DFS numbering used in
LCG is a bit unusual. Rather than numbering from 0, we number from 1,
and use 0 as the sentinel "unvisited" state. Other implementations often
use '-1' for this, but I find it easier to deal with 0 and it shouldn't
make any real difference provided someone doesn't write silly bugs like
forgetting to actually initialize the DFS numbering. Oops. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206954 91177308-0d34-0410-b5e6-96231b3b80d8
into a helper function. I plan to re-use it for doing incremental
DFS-based updates to the SCCs when we mutate the call graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206948 91177308-0d34-0410-b5e6-96231b3b80d8
the Callee list. This is going to be quite important to prevent removal
from going quadratic. No functionality changed at this point, this is
one of the refactoring patches I've broken out of my initial work toward
mutation updates of the call graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206938 91177308-0d34-0410-b5e6-96231b3b80d8
The branch that skips irreducible backedges was only active when
propagating mass at the top-level. In particular, when propagating mass
through a loop recognized by `LoopInfo` with irreducible control flow
inside, irreducible backedges would not be skipped.
Not sure where that idea came from, but the result was that mass was
lost until after loop exit. Added a testcase that covers this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206860 91177308-0d34-0410-b5e6-96231b3b80d8
Store pointers directly to loops inside the nodes. This could have been
done without changing the type stored in `std::vector<>`. However,
rather than computing the number of loops before constructing them
(which `LoopInfo` doesn't provide directly), I've switched to a
`vector<unique_ptr<LoopData>>`.
This adds some heap overhead, but the number of loops is typically
small.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206857 91177308-0d34-0410-b5e6-96231b3b80d8
This was implicitly with copy assignment before, which fails to actually
clear `std::vector<>`'s heap storage. Move assignment would work, but
since MSVC can't imply those anyway, explicitly `clear()`-ing members
makes more sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206856 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all the header #include lines, lib/Analysis/...
edition.
This one has a bit extra as there were *other* #define's before #include
lines in addition to DEBUG_TYPE. I've sunk all of them as a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206843 91177308-0d34-0410-b5e6-96231b3b80d8
define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
Change `PositiveFloat` to `UnsignedFloat`, and fix some of the comments
to indicate that it's disappearing eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206771 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206707, reapplying r206704. The preceding commit
to CalcSpillWeights should have sorted out the failing buildbots.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206766 91177308-0d34-0410-b5e6-96231b3b80d8
LazyCallGraph analysis framework. Wire it up all the way through the opt
driver and add some very basic testing that we can build pass pipelines
including these components. Still a lot more to do in terms of testing
that all of this works, but the basic pieces are here.
There is a *lot* of boiler plate here. It's something I'm going to
actively look at reducing, but I don't have any immediate ideas that
don't end up making the code terribly complex in order to fold away the
boilerplate. Until I figure out something to minimize the boilerplate,
almost all of this is based on the code for the existing pass managers,
copied and heavily adjusted to suit the needs of the CGSCC pass
management layer.
The actual CG management still has a bunch of FIXMEs in it. Notably, we
don't do *any* updating of the CG as it is potentially invalidated.
I wanted to get this in place to motivate the new analysis, and add
update APIs to the analysis and the pass management layers in concert to
make sure that the *right* APIs are present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206745 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206677, reapplying my BlockFrequencyInfo rewrite.
I've done a careful audit, added some asserts, and fixed a couple of
bugs (unfortunately, they were in unlikely code paths). There's a small
chance that this will appease the failing bots [1][2]. (If so, great!)
If not, I have a follow-up commit ready that will temporarily add
-debug-only=block-freq to the two failing tests, allowing me to compare
the code path between what the failing bots and what my machines (and
the rest of the bots) are doing. Once I've triggered those builds, I'll
revert both commits so the bots go green again.
[1]: http://bb.pgr.jp/builders/ninja-x64-msvc-RA-centos6/builds/1816
[2]: http://llvm-amd64.freebsd.your.org/b/builders/clang-i386-freebsd/builds/18445
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206704 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206666, as planned.
Still stumped on why the bots are failing. Sanitizer bots haven't
turned anything up. If anyone can help me debug either of the failures
(referenced in r206666) I'll owe them a beer. (In the meantime, I'll be
auditing my patch for undefined behaviour.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206677 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206628, reapplying r206622 (and r206626).
Two tests are failing only on buildbots [1][2]: i.e., I can't reproduce
on Darwin, and Chandler can't reproduce on Linux. Asan and valgrind
don't tell us anything, but we're hoping the msan bot will catch it.
So, I'm applying this again to get more feedback from the bots. I'll
leave it in long enough to trigger builds in at least the sanitizer
buildbots (it was failing for reasons unrelated to my commit last time
it was in), and hopefully a few others.... and then I expect to revert a
third time.
[1]: http://bb.pgr.jp/builders/ninja-x64-msvc-RA-centos6/builds/1816
[2]: http://llvm-amd64.freebsd.your.org/b/builders/clang-i386-freebsd/builds/18445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206666 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206622 and the MSVC fixup in r206626.
Apparently the remotely failing tests are still failing, despite my
attempt to fix the nondeterminism in r206621.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206628 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206556, effectively reapplying commit r206548 and
its fixups in r206549 and r206550.
In an intervening commit I've added target triples to the tests that
were failing remotely [1] (but passing locally). I'm hoping the mystery
is solved? I'll revert this again if the tests are still failing
remotely.
[1]: http://bb.pgr.jp/builders/ninja-x64-msvc-RA-centos6/builds/1816
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206622 91177308-0d34-0410-b5e6-96231b3b80d8
Reality is that we're never going to copy one of these. Supporting this
was becoming a nightmare because nothing even causes it to compile most
of the time. Lots of subtle errors built up that wouldn't have been
caught by any "normal" testing.
Also, make the move assignment actually work rather than the bogus swap
implementation that would just infloop if used. As part of that, factor
out the graph pointer updates into a helper to share between move
construction and move assignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206583 91177308-0d34-0410-b5e6-96231b3b80d8
LazyCallGraph. This is the start of the whole point of this different
abstraction, but it is just the initial bits. Here is a run-down of
what's going on here. I'm planning to incorporate some (or all) of this
into comments going forward, hopefully with better editing and wording.
=]
The crux of the problem with the traditional way of building SCCs is
that they are ephemeral. The new pass manager however really needs the
ability to associate analysis passes and results of analysis passes with
SCCs in order to expose these analysis passes to the SCC passes. Making
this work is kind-of the whole point of the new pass manager. =]
So, when we're building SCCs for the call graph, we actually want to
build persistent nodes that stick around and can be reasoned about
later. We'd also like the ability to walk the SCC graph in more complex
ways than just the traditional postorder traversal of the current CGSCC
walk. That means that in addition to being persistent, the SCCs need to
be connected into a useful graph structure.
However, we still want the SCCs to be formed lazily where possible.
These constraints are quite hard to satisfy with the SCC iterator. Also,
using that would bypass our ability to actually add data to the nodes of
the call graph to facilite implementing the Tarjan walk. So I've
re-implemented things in a more direct and embedded way. This
immediately makes it easy to get the persistence and connectivity
correct, and it also allows leveraging the existing nodes to simplify
the algorithm. I've worked somewhat to make this implementation more
closely follow the traditional paper's nomenclature and strategy,
although it is still a bit obtuse because it isn't recursive, using
an explicit stack and a tail call instead, and it is interruptable,
resuming each time we need another SCC.
The other tricky bit here, and what actually took almost all the time
and trials and errors I spent building this, is exactly *what* graph
structure to build for the SCCs. The naive thing to build is the call
graph in its newly acyclic form. I wrote about 4 versions of this which
did precisely this. Inevitably, when I experimented with them across
various use cases, they became incredibly awkward. It was all
implementable, but it felt like a complete wrong fit. Square peg, round
hole. There were two overriding aspects that pushed me in a different
direction:
1) We want to discover the SCC graph in a postorder fashion. That means
the root node will be the *last* node we find. Using the call-SCC DAG
as the graph structure of the SCCs results in an orphaned graph until
we discover a root.
2) We will eventually want to walk the SCC graph in parallel, exploring
distinct sub-graphs independently, and synchronizing at merge points.
This again is not helped by the call-SCC DAG structure.
The structure which, quite surprisingly, ended up being completely
natural to use is the *inverse* of the call-SCC DAG. We add the leaf
SCCs to the graph as "roots", and have edges to the caller SCCs. Once
I switched to building this structure, everything just fell into place
elegantly.
Aside from general cleanups (there are FIXMEs and too few comments
overall) that are still needed, the other missing piece of this is
support for iterating across levels of the SCC graph. These will become
useful for implementing #2, but they aren't an immediate priority.
Once SCCs are in good shape, I'll be working on adding mutation support
for incremental updates and adding the pass manager that this analysis
enables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206581 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite the shared implementation of BlockFrequencyInfo and
MachineBlockFrequencyInfo entirely.
The old implementation had a fundamental flaw: precision losses from
nested loops (or very wide branches) compounded past loop exits (and
convergence points).
The @nested_loops testcase at the end of
test/Analysis/BlockFrequencyAnalysis/basic.ll is motivating. This
function has three nested loops, with branch weights in the loop headers
of 1:4000 (exit:continue). The old analysis gives non-sensical results:
Printing analysis 'Block Frequency Analysis' for function 'nested_loops':
---- Block Freqs ----
entry = 1.0
for.cond1.preheader = 1.00103
for.cond4.preheader = 5.5222
for.body6 = 18095.19995
for.inc8 = 4.52264
for.inc11 = 0.00109
for.end13 = 0.0
The new analysis gives correct results:
Printing analysis 'Block Frequency Analysis' for function 'nested_loops':
block-frequency-info: nested_loops
- entry: float = 1.0, int = 8
- for.cond1.preheader: float = 4001.0, int = 32007
- for.cond4.preheader: float = 16008001.0, int = 128064007
- for.body6: float = 64048012001.0, int = 512384096007
- for.inc8: float = 16008001.0, int = 128064007
- for.inc11: float = 4001.0, int = 32007
- for.end13: float = 1.0, int = 8
Most importantly, the frequency leaving each loop matches the frequency
entering it.
The new algorithm leverages BlockMass and PositiveFloat to maintain
precision, separates "probability mass distribution" from "loop
scaling", and uses dithering to eliminate probability mass loss. I have
unit tests for these types out of tree, but it was decided in the review
to make the classes private to BlockFrequencyInfoImpl, and try to shrink
them (or remove them entirely) in follow-up commits.
The new algorithm should generally have a complexity advantage over the
old. The previous algorithm was quadratic in the worst case. The new
algorithm is still worst-case quadratic in the presence of irreducible
control flow, but it's linear without it.
The key difference between the old algorithm and the new is that control
flow within a loop is evaluated separately from control flow outside,
limiting propagation of precision problems and allowing loop scale to be
calculated independently of mass distribution. Loops are visited
bottom-up, their loop scales are calculated, and they are replaced by
pseudo-nodes. Mass is then distributed through the function, which is
now a DAG. Finally, loops are revisited top-down to multiply through
the loop scales and the masses distributed to pseudo nodes.
There are some remaining flaws.
- Irreducible control flow isn't modelled correctly. LoopInfo and
MachineLoopInfo ignore irreducible edges, so this algorithm will
fail to scale accordingly. There's a note in the class
documentation about how to get closer. See also the comments in
test/Analysis/BlockFrequencyInfo/irreducible.ll.
- Loop scale is limited to 4096 per loop (2^12) to avoid exhausting
the 64-bit integer precision used downstream.
- The "bias" calculation proposed on llvmdev is *not* incorporated
here. This will be added in a follow-up commit, once comments from
this review have been handled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206548 91177308-0d34-0410-b5e6-96231b3b80d8
After some discussions the preferred semantics of
the always_inline attribute is
inline always when the compiler can determine
that it it safe to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206487 91177308-0d34-0410-b5e6-96231b3b80d8
graph. This simplifies the custom move constructor operation to one of
walking the graph and updating the 'up' pointers to point to the new
location of the graph. Switch the nodes from a reference to a pointer
for the 'up' edge to facilitate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206450 91177308-0d34-0410-b5e6-96231b3b80d8
is set even when it contains a indirect branch.
The attribute overrules correctness concerns
like the escape of a local block address.
This is for rdar://16501761
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206429 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, BranchProbabilityInfo::calcLoopBranchHeuristics would determine the weights of basic blocks inside loops even when it didn't have enough information to estimate the branch probabilities correctly. This patch fixes the function to exit early if it doesn't see any exit edges or back edges and let the later heuristics determine the weights.
This fixes PR18705 and <rdar://problem/15991090>.
Differential Revision: http://reviews.llvm.org/D3363
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206194 91177308-0d34-0410-b5e6-96231b3b80d8
This is a shared implementation class for BlockFrequencyInfo and
MachineBlockFrequencyInfo, not for BlockFrequency, a related (but
distinct) class.
No functionality change.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206083 91177308-0d34-0410-b5e6-96231b3b80d8
into a constant size alloca by inlining.
Ran a run over the testsuite, no results out of the noise, fixes
the testcase in the PR.
PR19115.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205710 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation of getUserCost had duplicated (and hard-coded) the default
logic in getGEPCost. Instead, it is better to use getGEPCost directly, which
limits the default logic to the implementation of one function, and allows
targets to override the behavior.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205346 91177308-0d34-0410-b5e6-96231b3b80d8
This commit consist of two parts.
The first part fix the PR15967. The wrong conclusion was made when the MaxLookup
limit was reached. The fix introduce a out parameter (MaxLookupReached) to
DecomposeGEPExpression that the function aliasGEP can act upon.
The second part is introducing the constant MaxLookupSearchDepth to make sure
that DecomposeGEPExpression and GetUnderlyingObject use the same search depth.
This is a small cleanup to clarify the original algorithm.
Patch by Karl-Johan Karlsson!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204859 91177308-0d34-0410-b5e6-96231b3b80d8
Implement Pass::releaseMemory() in BlockFrequencyInfo and
MachineBlockFrequencyInfo. Just delete the private implementation when
not in use. Switch to a std::unique_ptr to make the logic more clear.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204741 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a loop of the form
for (unsigned n = 0; n != (k & -32); n += 32) {}
then we know that n is always divisible by 32 and the loop must
terminate. Even if we have a condition where the loop counter will
overflow it'll always hold this invariant.
PR19183. Our loop vectorizer creates this pattern and it's also
occasionally formed by loop counters derived from pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204728 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the target hook to take also the operand index into account when
calculating the cost of the constant materialization.
Related to <rdar://problem/16381500>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204435 91177308-0d34-0410-b5e6-96231b3b80d8
This commit extends the coverage of the constant hoisting pass, adds additonal
debug output and updates the function names according to the style guide.
Related to <rdar://problem/16381500>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204389 91177308-0d34-0410-b5e6-96231b3b80d8
The "noduplicate" attribute of call instructions is sometimes queried directly
and sometimes through the cannotDuplicate() predicate. This patch streamlines
all queries to use the cannotDuplicate() predicate. It also adds this predicate
to InvokeInst, to mirror what CallInst has.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204049 91177308-0d34-0410-b5e6-96231b3b80d8
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203559 91177308-0d34-0410-b5e6-96231b3b80d8
the stack of the analysis group because they are all immutable passes.
This is made clear by Craig's recent work to use override
systematically -- we weren't overriding anything for 'finalizePass'
because there is no such thing.
This is kind of a lame restriction on the API -- we can no longer push
and pop things, we just set up the stack and run. However, I'm not
invested in building some better solution on top of the existing
(terrifying) immutable pass and legacy pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203437 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203364 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
to ensure we don't mess up any of the overrides. Necessary for cleaning
up the Value use iterators and enabling range-based traversing of use
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202958 91177308-0d34-0410-b5e6-96231b3b80d8
