Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369013 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes https://bugs.llvm.org/show_bug.cgi?id=36578 and https://bugs.llvm.org/show_bug.cgi?id=36296.
Supersedes: https://reviews.llvm.org/D55966
One of the fundamental transformation that CoroSplit pass performs before splitting the coroutine is to find which values need to survive between suspend and resume and provide a slot for them in the coroutine frame to spill and restore the value as needed.
Coroutine frame becomes available once the storage for it was allocated and that point is marked in the pre-split coroutine with a llvm.coro.begin intrinsic.
FE normally puts all of the user-authored code that would be accessing those values after llvm.coro.begin, however, sometimes instructions accessing those values would end up prior to coro.begin. For example, writing out a value of the parameter into the alloca done by the FE or instructions that are added by the optimization passes such as SROA when it rewrites allocas.
Prior to this change, CoroSplit pass would try to move instructions that may end up accessing the values in the coroutine frame after CoroBegin. However it would run into problems (report_fatal_error) if some of the values would be used both in the allocation function (for example allocator is passed as a parameter to a coroutine) and in the use-authored body of the coroutine.
To handle this case and to simplify the instruction moving logic, this change removes all of the instruction moving. Instead, we only change the uses of the spilled values that are dominated by coro.begin and leave other instructions intact.
Before:
```
%var = alloca i32
%1 = getelementptr .. %var; ; will move this one after coro.begin
%f = call i8* @llvm.coro.begin(
```
After:
```
%var = alloca i32
%1 = getelementptr .. %var; stays put
%f = call i8* @llvm.coro.begin(
```
If we discover that there is a potential write into an alloca, prior to coro.begin we would copy its value from the alloca into the spill slot in the coroutine frame.
Before:
```
%var = alloca i32
store .. %var ; will move this one after coro.begin
%f = call i8* @llvm.coro.begin(
```
After:
```
%var = alloca i32
store .. %var ;stays put
%f = call i8* @llvm.coro.begin(
%tmp = load %var
store %tmp, %spill.slot.for.var
```
Note: This change does not handle array allocas as that is something that C++ FE does not produce, but, it can be added in the future if need arises
Reviewers: llvm-commits, modocache, ben-clayton, tks2103, rjmccall
Reviewed By: modocache
Subscribers: bartdesmet
Differential Revision: https://reviews.llvm.org/D66230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368949 91177308-0d34-0410-b5e6-96231b3b80d8
The suspend-crossing algorithm is not correct in the presence of uses
that cannot be reached on some successor path from their defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368796 91177308-0d34-0410-b5e6-96231b3b80d8
The support for swifterror allocas should work in all lowerings.
The support for swifterror arguments only really works in a lowering
with prototypes where you can ensure that the prototype also has a
swifterror argument; I'm not really sure how it could possibly be
made to work in the switch lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368795 91177308-0d34-0410-b5e6-96231b3b80d8
These rely on having an allocator provided to the coroutine and thus,
for now, only work in retcon lowerings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368791 91177308-0d34-0410-b5e6-96231b3b80d8
A quick contrast of this ABI with the currently-implemented ABI:
- Allocation is implicitly managed by the lowering passes, which is fine
for frontends that are fine with assuming that allocation cannot fail.
This assumption is necessary to implement dynamic allocas anyway.
- The lowering attempts to fit the coroutine frame into an opaque,
statically-sized buffer before falling back on allocation; the same
buffer must be provided to every resume point. A buffer must be at
least pointer-sized.
- The resume and destroy functions have been combined; the continuation
function takes a parameter indicating whether it has succeeded.
- Conversely, every suspend point begins its own continuation function.
- The continuation function pointer is directly returned to the caller
instead of being stored in the frame. The continuation can therefore
directly destroy the frame when exiting the coroutine instead of having
to leave it in a defunct state.
- Other values can be returned directly to the caller instead of going
through a promise allocation. The frontend provides a "prototype"
function declaration from which the type, calling convention, and
attributes of the continuation functions are taken.
- On the caller side, the frontend can generate natural IR that directly
uses the continuation functions as long as it prevents IPO with the
coroutine until lowering has happened. In combination with the point
above, the frontend is almost totally in charge of the ABI of the
coroutine.
- Unique-yield coroutines are given some special treatment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368788 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CoroSplit depends on CallGraphWrapperPass, but it was not explicitly adding it as a pass dependency.
This missing dependency can trigger errors / assertions / crashes in PMTopLevelManager::schedulePass() under certain configurations.
Author: ben-clayton
Reviewers: GorNishanov
Reviewed By: GorNishanov
Subscribers: capn, EricWF, modocache, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63144
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363727 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CoroFrame was not considering static array allocas, and was only ever reserving a single element in the coroutine frame.
This meant that stores to the non-zero'th element would corrupt later frame data.
Store static array allocas as field arrays in the coroutine frame.
Added test.
Committed by Gor Nishanov on behalf of ben-clayton
Reviewers: GorNishanov, modocache
Reviewed By: GorNishanov
Subscribers: Orlando, capn, EricWF, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61372
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360636 91177308-0d34-0410-b5e6-96231b3b80d8
code to `CallBase`.
This patch focuses on the legacy PM, call graph, and some of inliner and legacy
passes interacting with those APIs from `CallSite` to the new `CallBase` class.
No interesting changes.
Differential Revision: https://reviews.llvm.org/D60412
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358739 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Depends on https://reviews.llvm.org/D59069.
https://bugs.llvm.org/show_bug.cgi?id=40979 describes a bug in which the
-coro-split pass would assert that a use was across a suspend point from
a definition. Normally this would mean that a value would "spill" across
a suspend point and thus need to be stored in the coroutine frame. However,
in this case the use was unreachable, and so it would not be necessary
to store the definition on the frame.
To prevent the assert, simply remove unreachable basic blocks from a
coroutine function before computing spills. This avoids the assert
reported in PR40979.
Reviewers: GorNishanov, tks2103
Reviewed By: GorNishanov
Subscribers: EricWF, jdoerfert, llvm-commits, lewissbaker
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59068
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355852 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Enable suspend point simplification for cases where:
* coro.save and coro.suspend are in different basic blocks
* where there are intervening intrinsics
Reviewers: modocache, tks2103, lewissbaker
Reviewed By: modocache
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D55160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348897 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the primary remaining API producing `TerminatorInst` which
will reduce the rate at which code is introduced trying to use it and
generally make it much easier to remove the remaining APIs across the
codebase.
Also clean up some of the stragglers that the previous mechanical update
of variables missed.
Users of LLVM and out-of-tree code generally will need to update any
explicit variable types to handle this. Replacing `TerminatorInst` with
`Instruction` (or `auto`) almost always works. Most of these edits were
made in prior commits using the perl one-liner:
```
perl -i -ple 's/TerminatorInst(\b.* = .*getTerminator\(\))/Instruction\1/g'
```
This also my break some rare use cases where people overload for both
`Instruction` and `TerminatorInst`, but these should be easily fixed by
removing the `TerminatorInst` overload.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344504 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340701 91177308-0d34-0410-b5e6-96231b3b80d8
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340699 91177308-0d34-0410-b5e6-96231b3b80d8
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333954 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
https://bugs.llvm.org/show_bug.cgi?id=34897 demonstrates an incorrect
coroutine frame allocation elision in the coro-elide pass. The elision
is performed on the basis that the SSA variables from all llvm.coro.begin
are directly referenced in subsequent llvm.coro.destroy instructions.
However, this ignores the fact that the function may exit through paths
that do not run these destroy instructions. In the sample program from
PR34897, for example, the llvm.coro.destroy instruction is only
executed in exception handling code. When the coroutine function exits
normally, llvm.coro.destroy is not called. Eliding the allocation in
this case causes a subsequent reference to the coroutine handle from
outside of the function to access freed memory.
To fix the issue, when finding an llvm.coro.destroy for each llvm.coro.begin,
only consider llvm.coro.destroy that are executed along non-exceptional paths.
Test Plan:
1. Download the sample program from
https://bugs.llvm.org/show_bug.cgi?id=34897, compile it with
`clang++ -fcoroutines-ts -stdlib=libc++ -std=c++1z -O2`, and run it.
It should print `"run1\ncheck1\nrun2\ncheck2"` and then exit
successfully.
2. Compile https://godbolt.org/g/mCKfnr and confirm it is still
optimized to a single instruction, 'return 1190'.
3. `check-llvm`
Reviewers: rsmith, GorNishanov, eric_niebler
Reviewed By: GorNishanov
Subscribers: andrewrk, lewissbaker, EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D43242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332077 91177308-0d34-0410-b5e6-96231b3b80d8
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331184 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kcc, pcc, danielcdh, jmolloy, sanjoy, dberlin, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D45142
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330059 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If an alloca need to be stored in the coroutine frame and it has an alignment specified and the alignment does not match the natural alignment of the alloca type. Insert appropriate padding into the coroutine frame to make sure that it gets requested alignment.
For example for a packet type (which natural alignment is 1), but alloca alignment is 8, we may need to insert a padding field with required number of bytes to make sure it is properly aligned.
```
%PackedStruct = type <{ i64 }>
...
%data = alloca %PackedStruct, align 8
```
If the previous field in the coroutine frame had alignment 2, we would have [6 x i8] inserted before %PackedStruct in the coroutine frame:
```
%f.Frame = type { ..., i16, [6 x i8], %PackedStruct }
```
Reviewers: rnk, lewissbaker, modocache
Reviewed By: modocache
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D45221
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329112 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When attempting to split a coroutine with 'hidden' visibility (for
example, a C++ coroutine that is inlined when compiled with the option
'-fvisibility-inlines-hidden'), LLVM would hit an assertion in
include/llvm/IR/GlobalValue.h:240: "local linkage requires default
visibility". The issue is that the visibility is copied from the source
of the function split in the `CloneFunctionInto` function, but the linkage
is not. To fix, create the new function first with external linkage,
then copy the linkage from the original function *after* `CloneFunctionInto`
is called.
Since `GlobalValue::setLinkage` in turn calls `maybeSetDsoLocal`, the
explicit call to `setDSOLocal` can be removed in CoroSplit.cpp.
Test Plan: check-llvm
Reviewers: GorNishanov, lewissbaker, EricWF, majnemer, rnk
Reviewed By: rnk
Subscribers: llvm-commits, eric_niebler
Differential Revision: https://reviews.llvm.org/D44185
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329033 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A recent addition to Coroutines TS (https://wg21.link/p0913) adds a pre-defined coroutine noop_coroutine that does nothing.
To implement this feature, we implemented an llvm.coro.noop intrinsic that returns a coroutine handle to a coroutine that does nothing when resumed or destroyed.
Reviewers: EricWF, modocache, rnk, lewissbaker
Reviewed By: modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328986 91177308-0d34-0410-b5e6-96231b3b80d8
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move a debug statement to above where an assertion is hit, so that the debug
statement can be inspected before a stack trace.
Test Plan: `check-llvm`
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325529 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The behavior described in Coroutines TS `[dcl.fct.def.coroutine]/7`
allows coroutine parameters to be passed into allocator functions.
The instructions to store values into the alloca'd parameters must not
be moved past the frame allocation, otherwise uninitialized values are
passed to the allocator.
Test Plan: `check-llvm`
Reviewers: rsmith, GorNishanov, eric_niebler
Reviewed By: GorNishanov
Subscribers: compnerd, EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D43000
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325285 91177308-0d34-0410-b5e6-96231b3b80d8
While updating clang tests for having clang set dso_local I noticed
that:
- There are *a lot* of tests to update.
- Many of the updates are redundant.
They are redundant because a GV is "obviously dso_local". This patch
starts formalizing that a bit by requiring that internal and private
GVs be dso_local too. Since they all are, we don't have to print
dso_local to the textual representation, making it a bit more compact
and easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322317 91177308-0d34-0410-b5e6-96231b3b80d8
Guillaume Chatelet