Re-commit r303937 + r303949 as they were not the cause for the build
failures.
We do not track liveness of reserved registers so adding them to the
liveins list in computeLiveIns() was completely unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303970 91177308-0d34-0410-b5e6-96231b3b80d8
Tentatively revert, suspecting that it caused breakage in stage2
buildbots.
This reverts commit r303949.
This reverts commit r303937.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303955 91177308-0d34-0410-b5e6-96231b3b80d8
We do not track liveness of reserved registers so adding them to the
liveins list in computeLiveIns() was completely unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303937 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: D25742 improved the precision of debug locations for PGO by removing debug locations from common tail when tail-merging. However, if identical insturctions that are merged into a common tail have the same debug locations, there's no need to remove them. This patch creates a merged debug location of identical instructions across SameTails and assign it to the instruction in the common tail, so that the debug locations are maintained if they are same across identical instructions.
Reviewers: aprantl, probinson, MatzeB, rob.lougher
Reviewed By: aprantl
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D30226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297805 91177308-0d34-0410-b5e6-96231b3b80d8
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well, subject to some simple frequency calculations.
Differential Revision: https://reviews.llvm.org/D28583
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293716 91177308-0d34-0410-b5e6-96231b3b80d8
Branch folder removes implicit defs if they are the only non-branching
instructions in a block, and the branches do not use the defined registers.
The problem is that in some cases these implicit defs are required for
the liveness information to be correct.
Differential Revision: https://reviews.llvm.org/D25478
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284036 91177308-0d34-0410-b5e6-96231b3b80d8
This is prep work for allowing the threshold to be different during layout,
and to enforce a single threshold between merging and duplicating during
layout. No observable change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279117 91177308-0d34-0410-b5e6-96231b3b80d8
Use LivePhysRegs with a backwards walking algorithm to update live in
lists, this way the results do not depend on the presence of kill flags
anymore.
This patch also reduces the number of registers added as live-in.
Previously all pristine registers as well as all sub registers of a
super register were added resulting in unnecessarily large live in
lists. This fixed https://llvm.org/PR25263.
Differential Revision: http://reviews.llvm.org/D22027
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275201 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies commit r271930, r271915, r271923. They hit a bug in
Thumb which is fixed in r272258 now.
The original message:
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272267 91177308-0d34-0410-b5e6-96231b3b80d8
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
Differential Revision: http://reviews.llvm.org/D20276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271925 91177308-0d34-0410-b5e6-96231b3b80d8
Track which basic blocks belong to which funclets. Permit branch
folding to fire but only if it can prove that doing so will not cause
code in one funclet to be reused in another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249257 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
BranchFolderPass was not correctly setting the basic block branch weights when
tail-merging created or merged blocks. This patch recomutes the weights of
tail-merged blocks using the following formula:
branch_weight(merged block to successor j) =
sum(block_frequency(bb) * branch_probability(bb -> j))
bb is a block that is in the set of merged blocks.
<rdar://problem/16256423>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215135 91177308-0d34-0410-b5e6-96231b3b80d8
It works with clang, but GCC has different rules so we can't make all of those
hidden. This reverts commit r190534.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190536 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to write unit tests that are less susceptible
to minor code motion, particularly copy placement. block-placement.ll
covers this case with -pre-RA-sched=source which will soon be
default. One incorrectly named block is already fixed, but without
this fix, enabling new coalescing and scheduling would cause more
failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184680 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, the testcase I have is large and confidential, so I don't have a test to commit at the moment; I'll see if I can come up with something smaller where this issue reproduces.
<rdar://problem/9716278>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134565 91177308-0d34-0410-b5e6-96231b3b80d8
sharp all or nothing transition when one extra predecessor was added. Now
we still test first ones for merging.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132974 91177308-0d34-0410-b5e6-96231b3b80d8
markers. In some cases a register def is dead on one path, but not on
another.
This is passing Clang self-hosting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131214 91177308-0d34-0410-b5e6-96231b3b80d8
at the start of basic blocks to their common predecessor. It's actually quite
common (e.g. about 50 times in JM/lencod) and has shown to be a nice code size
benefit. e.g.
pushq %rax
testl %edi, %edi
jne LBB0_2
## BB#1:
xorb %al, %al
popq %rdx
ret
LBB0_2:
xorb %al, %al
callq _foo
popq %rdx
ret
=>
pushq %rax
xorb %al, %al
testl %edi, %edi
je LBB0_2
## BB#1:
callq _foo
LBB0_2:
popq %rdx
ret
rdar://9145558
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131172 91177308-0d34-0410-b5e6-96231b3b80d8
running tail duplication when doing branch folding for if-conversion, and
we also want to be able to run tail duplication earlier to fix some
reg alloc problems. Move the CanFallThrough function from BranchFolding
to MachineBasicBlock so that it can be shared by TailDuplication.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89904 91177308-0d34-0410-b5e6-96231b3b80d8
instead of typedefs for std::pair. This simplifies the type of
SameTails, which previously was std::vector<std::pair<std::vector<std::pair<unsigned, MachineBasicBlock *> >::iterator, MachineBasicBlock::iterator>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86885 91177308-0d34-0410-b5e6-96231b3b80d8
use it to control tail merging when there is a tradeoff between performance
and code size. When there is only 1 instruction in the common tail, we have
been merging. That can be good for code size but is a definite loss for
performance. Now we will avoid tail merging in that case when the
optimization level is "Aggressive", i.e., "-O3". Radar 7338114.
Since the IfConversion pass invokes BranchFolding, it too needs to know
the optimization level. Note that I removed the RegisterPass instantiation
for IfConversion because it required a default constructor. If someone
wants to keep that for some reason, we can add a default constructor with
a hard-wired optimization level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85346 91177308-0d34-0410-b5e6-96231b3b80d8
