interface methods isCOFF().
The '-coff' command line option has been removed. It was not used in any
test cases.
The patch reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208157 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, there's a -n/--no-output option, which disables the writing
of any .gcov files, so that it emits only the summary info on stdout.
This implements the same behaviour in llvm-cov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208148 91177308-0d34-0410-b5e6-96231b3b80d8
fall back to the normal path without a cpu. While doing this fix
llc to just exit when we don't have a module to process instead of
asserting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208102 91177308-0d34-0410-b5e6-96231b3b80d8
We already do this for shstrtab, so might as well do it for strtab. This
extracts the string table building code into a separate class. The idea
is to use it for other object formats too.
I mostly wanted to do this for the general principle, but it does save a
little bit on object file size. I tried this on a clang bootstrap and
saved 0.54% on the sum of object file sizes (1.14 MB out of 212 MB for
a release build).
Differential Revision: http://reviews.llvm.org/D3533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207670 91177308-0d34-0410-b5e6-96231b3b80d8
This starts in MCJIT::getSymbolAddress where the
unique_ptr<object::Binary> is release()d and (after a cast) passed to a
single caller, MCJIT::addObjectFile.
addObjectFile calls RuntimeDyld::loadObject.
RuntimeDld::loadObject calls RuntimeDyldELF::createObjectFromFile
And the pointer is never owned at this point. I say this point, because
the alternative codepath, RuntimeDyldMachO::createObjectFile certainly
does take ownership, so this seemed like a good hint that this was a/the
right place to take ownership.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207580 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for an -mattr option to the gold plugin and to llvm-lto. This
allows the caller to specify details of the subtarget architecture, like +aes,
or +ssse3 on x86. Note that this requires a change to the include/llvm-c/lto.h
interface: it adds a function lto_codegen_set_attr and it increments the
version of the interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207279 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kostya Serebryany.
unique_ptr would be nice, but it's a bit too much work for an area I'm
not familiar with, nor invested in, unfortunately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207265 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
Should fix PR19526.
When Oscar added this code in the intial CMake build system port, he had
a TODO saying that ${CMAKE_SHARED_LINKER_FLAGS} was probably wrong. I
agree. I'm using ${CMAKE_CXX_LINK_FLAGS} to point LLVM at my custom
installation of gcc 4.recent, so that seems more correct. With this
change, I can build creduce against an installed clang, and it picks up
the write flags from --ldflags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207171 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206971 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
We normally don't drop functions from the C API's, but in this case I think we
can:
* The old implementation of getFileOffset was fairly broken
* The introduction of LLVMGetSymbolFileOffset was itself a C api breaking
change as it removed LLVMGetSymbolOffset.
* It is an incredibly specialized use case. The only reason MCJIT needs it is
because of its odd position of being a dynamic linker of .o files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206750 91177308-0d34-0410-b5e6-96231b3b80d8
LazyCallGraph analysis framework. Wire it up all the way through the opt
driver and add some very basic testing that we can build pass pipelines
including these components. Still a lot more to do in terms of testing
that all of this works, but the basic pieces are here.
There is a *lot* of boiler plate here. It's something I'm going to
actively look at reducing, but I don't have any immediate ideas that
don't end up making the code terribly complex in order to fold away the
boilerplate. Until I figure out something to minimize the boilerplate,
almost all of this is based on the code for the existing pass managers,
copied and heavily adjusted to suit the needs of the CGSCC pass
management layer.
The actual CG management still has a bunch of FIXMEs in it. Notably, we
don't do *any* updating of the CG as it is potentially invalidated.
I wanted to get this in place to motivate the new analysis, and add
update APIs to the analysis and the pass management layers in concert to
make sure that the *right* APIs are present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206745 91177308-0d34-0410-b5e6-96231b3b80d8
file. This will make it easy to scale up the number of passes supported.
Currently, it just supports the function and module transformation
passes that were already supported in the opt tool explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206737 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for an indexed instrumentation based profiling
format, which is just a small header and an on disk hash table. This
format will be used by clang's -fprofile-instr-use= for PGO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206656 91177308-0d34-0410-b5e6-96231b3b80d8
Immutable DILineInfo doesn't bring any benefits and complicates
code. Also, use std::string instead of SmallString<16> for file
and function names - their length can vary significantly.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206654 91177308-0d34-0410-b5e6-96231b3b80d8
Still only 32-bit ARM using it at this stage, but the promotion allows
direct testing via opt and is a reasonably self-contained patch on the
way to switching ARM64.
At this point, other targets should be able to make use of it without
too much difficulty if they want. (See ARM64 commit coming soon for an
example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206485 91177308-0d34-0410-b5e6-96231b3b80d8
Since LLVM currently only supports WinCOFF, assume that the input is WinCOFF
rather than another type of COFF file (ECOFF/XCOFF). If the architecture is
detected as thumb (e.g. the file has a IMAGE_FILE_MACHINE_ARMNT magic) then use
a triple of thumbv7-windows.
This allows for objdump to properly handle WoA object files without having to
specify the target triple manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206446 91177308-0d34-0410-b5e6-96231b3b80d8
Implement DebugInfoVerifier, which steals verification relying on
DebugInfoFinder from Verifier.
- Adds LegacyDebugInfoVerifierPassPass, a ModulePass which wraps
DebugInfoVerifier. Uses -verify-di command-line flag.
- Change verifyModule() to invoke DebugInfoVerifier as well as
Verifier.
- Add a call to createDebugInfoVerifierPass() wherever there was a
call to createVerifierPass().
This implementation as a module pass should sidestep efficiency issues,
allowing us to turn debug info verification back on.
<rdar://problem/15500563>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206300 91177308-0d34-0410-b5e6-96231b3b80d8
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206241 91177308-0d34-0410-b5e6-96231b3b80d8
Once the auxiliary fields relating to the filename have been inspected, any
following auxiliary fields need not be visited as they have been consumed (the
following fields comprise the filepath as a single unit).
Adjust the test to catch this even if ASAN is not enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206190 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than switching behaviour on whether a previous symbol has an auxiliary
symbol record for the next count of elements, simply iterate over the auxiliary
symbols right after processing the current symbol entry. This makes the
behaviour much simpler to follow and similar to llvm-readobj and yaml2obj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206146 91177308-0d34-0410-b5e6-96231b3b80d8
If a filename is a multiple of 18 characters, there will be no null-terminator.
This will result in an invalid access by the constructed StringRef. Add a test
case to exercise this and fix that handling. Address this same vulnerability in
llvm-readobj as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206145 91177308-0d34-0410-b5e6-96231b3b80d8
The auxiliary file records are contiguous and only contain the filename.
Construct a StringRef directly rather than copying to a temporary buffer.
Suggested by majnemer on IRC!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206139 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for file auxiliary symbol entries in COFF symbol tables. A COFF
symbol table with a FILE entry is followed by sizeof(__FILE__) / 18 auxiliary
symbol records which contain the filename. Read them and form the original
filename that the record contains. Then display the name in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206126 91177308-0d34-0410-b5e6-96231b3b80d8
When -mcpu=native is passed, autodetect the host CPU and pass that
as the CPU name to the TargetMachine factory method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206095 91177308-0d34-0410-b5e6-96231b3b80d8
The patch implements support for both relocation record formats: Elf_Rel
and Elf_Rela. It is possible to define relocation against symbol only.
Relocations against sections will be implemented later. Now yaml2obj
recognizes X86_64, MIPS and Hexagon relocation types.
Example of relocation section specification:
Sections:
- Name: .text
Type: SHT_PROGBITS
Content: "0000000000000000"
AddressAlign: 16
Flags: [SHF_ALLOC]
- Name: .rel.text
Type: SHT_REL
Info: .text
AddressAlign: 4
Relocations:
- Offset: 0x1
Symbol: glob1
Type: R_MIPS_32
- Offset: 0x2
Symbol: glob2
Type: R_MIPS_CALL16
The patch reviewed by Michael Spencer, Sean Silva, Shankar Easwaran.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206017 91177308-0d34-0410-b5e6-96231b3b80d8
