insufficient to populate the expected struct. Prior to this we already
bailed out of the routine when this situation comes up, so none of this
code had any effect.
If someone wants to bring it back to handle these cases, fixing the
earlier conditions and adding the necessary test cases that actually
exercises it, they can always revert this and go from there.
Both of these were noticed by PVS-Studio due to the identical (dead)
condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285989 91177308-0d34-0410-b5e6-96231b3b80d8
in llvm-objdump for Mach-O files add the printing of the
ARM_THREAD_STATE64 in the same format as
otool-classic(1) on darwin.
To do this the 64-bit ARM general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://28985800
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285967 91177308-0d34-0410-b5e6-96231b3b80d8
Add the necessary definitions for RISC-V ELF files, including relocs. Also
make necessary trivial change to ELFYaml, llvm-objdump, and llvm-readobj in
order to work with RISC-V ELFs.
Differential Revision: https://reviews.llvm.org/D23557
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285708 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the version of report_error were quoting the filename and
printing a colon between the file name and the error message, but this
one wasn't doing either of those. Fix the output to be more
consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285252 91177308-0d34-0410-b5e6-96231b3b80d8
the ARM_THREAD_STATE in the same format as
otool-classic(1) on darwin.
Also remove an extra space in printing the initprot to make
the output match otool-classic(1) on darwin.
rdar://28851457
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284852 91177308-0d34-0410-b5e6-96231b3b80d8
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283671 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a copy of the demangler in libcxxabi.
The code also has no dependencies on anything else in LLVM. To enforce
that I added it as another library. That way a BUILD_SHARED_LIBS will
fail if anyone adds an use of StringRef for example.
The no llvm dependency combined with the fact that this has to build
on linux, OS X and Windows required a few changes to the code. In
particular:
No constexpr.
No alignas
On OS X at least this library has only one global symbol:
__ZN4llvm16itanium_demangleEPKcPcPmPi
My current plan is:
Commit something like this
Change lld to use it
Change lldb to use it as the fallback
Add a few #ifdefs so that exactly the same file can be used in
libcxxabi to export abi::__cxa_demangle.
Once the fast demangler in lldb can handle any names this
implementation can be replaced with it and we will have the one true
demangler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280732 91177308-0d34-0410-b5e6-96231b3b80d8
This adds behaviour similar to binutils' objdump which can show symbols in an
import library. Differences from that stem around the fact that we do not
create section symbols nor the all import import descriptor symbol reference.
However, this does mean that the tool can serve as a possible replacement for
the existing tool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279088 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This change fix bug in AMDGPU disassembly. Previously, presence of symbols other than kernel symbols caused objdump to skip begining of those symbols.
Reviewers: tstellarAMD, vpykhtin, Bigcheese, ruiu
Subscribers: kzhuravl, arsenm
Differential Revision: http://reviews.llvm.org/D21966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278921 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of the find is only used to compare against end(), just
use is_contained instead.
No functionality change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278469 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit the revert commit r277627. The build errors
mentioned in r277627 were likely caused by an unclean build directory.
Sorry for the noise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277630 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r277540. It breaks the build with:
../lib/Object/Archive.cpp:264:41: error: return type of out-of-line definition of 'llvm::object::ArchiveMemberHeader::getUID' differs from that in the declaration
Expected<unsigned> ArchiveMemberHeader::getUID() const {
~~~~~~~~~~~~~~~~~~ ^
include/llvm/Object/Archive.h:53:12: note: previous declaration is here
unsigned getUID() const;
~~~~~~~~ ^
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277627 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed the last incorrect uses of llvm_unreachable() in the code
which were actually just cases of errors in the input Archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277540 91177308-0d34-0410-b5e6-96231b3b80d8
We had import_directory_table_entry and
coff_import_directory_table_entry, remove one. Also, factor out the
logic which determins if a descriptor is a terminator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277296 91177308-0d34-0410-b5e6-96231b3b80d8
As mentioned in commit log for r276686 this next step is adding a new
method in the ArchiveMemberHeader class to get the full name that
does proper error checking, and can be use for error messages.
To do this the name of ArchiveMemberHeader::getName() is changed to
ArchiveMemberHeader::getRawName() to be consistent with
Archive::Child::getRawName(). Then the “new” method is the addition
of a new implementation of ArchiveMemberHeader::getName() which gets
the full name and provides proper error checking. Which is mostly a rewrite
of what was Archive::Child::getName() and cleaning up incorrect uses of
llvm_unreachable() in the code which were actually just cases of errors
in the input Archives.
Then Archive::Child::getName() is changed to return Expected<> and use
the new implementation of ArchiveMemberHeader::getName() .
Also needed to change Archive::getMemoryBufferRef() with these
changes to return Expected<> as well to propagate Errors up.
As well as changing Archive::isThinMember() to return Expected<> .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277177 91177308-0d34-0410-b5e6-96231b3b80d8
This step builds on Lang Hames work to change Archive::child_iterator
for better interoperation with Error/Expected. Building on that it is now
possible to return an error message when the size field of an archive
contains non-decimal characters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276025 91177308-0d34-0410-b5e6-96231b3b80d8
The same value for EM_BPF is being propagated to glibc,
elfutils, and binutils.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275633 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need to print any of the special __mh_*_header symbols when
disassembling. Since they point at the beginning of the segment (not where the
actual code is) they're pretty misleading.
Should also fix lld bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275498 91177308-0d34-0410-b5e6-96231b3b80d8
We were quite happy to read past the end of the valid section data when
disassembling. Instead we entirely skip stub dylibs, and tell the user what's
happened if their section only has partial data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275487 91177308-0d34-0410-b5e6-96231b3b80d8
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275316 91177308-0d34-0410-b5e6-96231b3b80d8
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274079 91177308-0d34-0410-b5e6-96231b3b80d8
The last import is the penultimate entry, the last entry is nulled out.
Data beyond the null entry should not be considered to hold import
entries.
This fixes PR28302.
N.B. I am working on a reduced testcase, the one in PR28302 is too
large.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273790 91177308-0d34-0410-b5e6-96231b3b80d8
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273701 91177308-0d34-0410-b5e6-96231b3b80d8
with the -macho and -universal-headers flags.
Just a follow on to r273207, I missed updating the printing of the fat magic
number when the universal file is a 64-bit universal file.
rdar://26899493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273324 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272880 91177308-0d34-0410-b5e6-96231b3b80d8
It was printing out nothing in this case.
llvm-objdump tries to disassemble sections a symbol at a time. In the case of a
fully stripped Mach-O executable the only symbol remaining in the (__TEXT,__text)
section is the special linker defined symbol __mh_execute_header . This
symbol is special in that while it is N_SECT symbol in the (__TEXT,__text)
its address is before the start of the (__TEXT,__text). It’s address is the
start of the __TEXT segment which is where the mach header is statically
linked. So the code in DisassembleMachO() needs to deal with this case specially.
rdar://26778273
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272837 91177308-0d34-0410-b5e6-96231b3b80d8
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272232 91177308-0d34-0410-b5e6-96231b3b80d8
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271332 91177308-0d34-0410-b5e6-96231b3b80d8
At some point we're going to need libObject to have this dependency, but as it is now this is causing too many headaches. This commit will reduce the linkage to just llvm-objdump where it is strictly needed, and we'll cross the libObject bridge later when we need it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270866 91177308-0d34-0410-b5e6-96231b3b80d8
This is a support COFF feature. Ensure that we can display the weak externals
auxiliary symbol. It contains useful information (such as the default binding
and how to resolve the symbol).
This reapplies the previous patch with a modification which hopefully should fix
the endianness issues. The variadic call would promote the ulittle32_t to a
uint32_t which would lose the byte-swapping behaviour desired.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270813 91177308-0d34-0410-b5e6-96231b3b80d8
