There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309426 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309158 91177308-0d34-0410-b5e6-96231b3b80d8
A few tests in llvm/test/Transforms/Util/PredicateInfo/ are using -reverse-iterate.
The option -reverse-iterate is enabled with +Asserts in usual cases, but it can be turned on/off regardless of LLVM_ENABLE_ASSERTIONS.
I wonder if this were incompatible to https://reviews.llvm.org/D33908 (r304757).
Differential Revision: https://reviews.llvm.org/D33854
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304851 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Sort OpsToRename before iterating to make iteration order deterministic.
Thanks to Daniel Berlin for the sorting logic.
Reviewers: dberlin, RKSimon, efriedma, davide
Reviewed By: dberlin, davide
Subscribers: sanjoy, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D33265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304447 91177308-0d34-0410-b5e6-96231b3b80d8
One of the fast-math optimizations is to replace calls to standard double
functions with their float equivalents, e.g. exp -> expf. However, this can
cause infinite loops for the following:
float expf(float val) { return (float) exp((double) val); }
A similar inline declaration exists in the MinGW-w64 math.h header file which
when compiled with -O2/3 and fast-math generates infinite loops.
So this fix checks that the calling function to the standard double function
that is being replaced does not match the float equivalent.
Differential Revision: https://reviews.llvm.org/D31806
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301304 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis, it has Analysis passes, and once NewGVN is made an Analysis,
this removes the cross dependency from Analysis to Transform/Utils.
NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299980 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
While we don't want them aliasing with other pointers, there seems to
be no point in not having them clobber must-aliased'd pointers.
If some day, we split the aliasing and ordering chains, we'd make this
not aliasing but an ordering barrier (IE it doesn't affect it's
memory, but we can't hoist it above it).
Reviewers: hfinkel, george.burgess.iv
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31865
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299865 91177308-0d34-0410-b5e6-96231b3b80d8
In isUseTriviallyOptimizableToLiveOnEntry, pointsToConstantMemory needs to be
called on the load's pointer operand, not on the result of the load (which
might not even be a pointer).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299823 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Depends on D29606 and D29682
Makes us pass GVN's edge.ll (we also will pass a few other testcases
they just need cleaning up).
Thoughts on the Predicate* hiearchy of classes especially welcome :)
(it's not clear to me how best to organize it, and currently, the getBlock* seems ... uglier than maybe wasting a field somewhere or something).
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295889 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds support for placing predicateinfo such that it affects critical edges.
This fixes the issues mentioned by Nuno on the mailing list.
Depends on D29519
Reviewers: davide, nlopes
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29606
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294921 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a utility to build extended SSA (see "ABCD: eliminating
array bounds checks on demand"), and an intrinsic to support it. This
is then used to get functionality equivalent to propagateEquality in
GVN, in NewGVN (without having to replace instructions as we go). It
would work similarly in SCCP or other passes. This has been talked
about a few times, so i built a real implementation and tried to
productionize it.
Copies are inserted for operands used in assumes and conditional
branches that are based on comparisons (see below for more)
Every use affected by the predicate is renamed to the appropriate
intrinsic result.
E.g.
%cmp = icmp eq i32 %x, 50
br i1 %cmp, label %true, label %false
true:
ret i32 %x
false:
ret i32 1
will become
%cmp = icmp eq i32, %x, 50
br i1 %cmp, label %true, label %false
true:
; Has predicate info
; branch predicate info { TrueEdge: 1 Comparison: %cmp = icmp eq i32 %x, 50 }
%x.0 = call @llvm.ssa_copy.i32(i32 %x)
ret i32 %x.0
false:
ret i23 1
(you can use -print-predicateinfo to get an annotated-with-predicateinfo dump)
This enables us to easily determine what operations are affected by a
given predicate, and how operations affected by a chain of
predicates.
Reviewers: davide, sanjoy
Subscribers: mgorny, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D29519
Update for review comments
Fix a bug Nuno noticed where we are giving information about and/or on edges where the info is not useful and easy to use wrong
Update for review comments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294351 91177308-0d34-0410-b5e6-96231b3b80d8
In ValueMapper we create new operands for MDNodes and
rely on MDNode::replaceWithUniqued to create a new MDNode
with the specified operands. However this doesn't always
actually happen correctly for DISubprograms because when we
uniquify the new node, we only odr-compare it with existing nodes
(MDNodeSubsetEqualImpl<DISubprogram>::isDeclarationOfODRMember). Although
the TemplateParameters field can refer to a distinct DICompileUnit via
DITemplateTypeParameter::type -> DICompositeType::scope -> DISubprogram::unit,
it is not currently included in the odr comparison. As a result, we can end
up getting our original DISubprogram back, which means we will have a cloned
module referring to the DICompileUnit in the original module, which causes
a verification error.
The fix I implemented was to consider TemplateParameters to be one of the
odr-equal properties. But I'm a little uncomfortable with this. In general it
seems unsound to rely on distinct MDNodes never being reachable from nodes
which we only check odr-equality of. My only long term suggestion would be
to separate odr-uniquing from full uniquing.
Differential Revision: https://reviews.llvm.org/D29240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294240 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Next round of extra tests for MSSA.
I have a prototype invariant.group handling implementation
that fixes all the FIXMEs, and I think it will be
easier to see what is the difference if I firstly
post this, and then only fix fixits.
Reviewers: george.burgess.iv, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292797 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This test had a bug: !llvm.invariant.group instead
of !invariant.group.
Also add some new test for future development.
All tests passes, when MSSA will support invariant.group
only the lines with FIXIT should be changed.
Reviewers: dberlin, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292730 91177308-0d34-0410-b5e6-96231b3b80d8
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290292 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290153 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289982 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289920 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289902 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change adds some verification in the IR verifier around struct path
TBAA metadata.
Other than some basic sanity checks (e.g. we get constant integers where
we expect constant integers), this checks:
- That by the time an struct access tuple `(base-type, offset)` is
"reduced" to a scalar base type, the offset is `0`. For instance, in
C++ you can't start from, say `("struct-a", 16)`, and end up with
`("int", 4)` -- by the time the base type is `"int"`, the offset
better be zero. In particular, a variant of this invariant is needed
for `llvm::getMostGenericTBAA` to be correct.
- That there are no cycles in a struct path.
- That struct type nodes have their offsets listed in an ascending
order.
- That when generating the struct access path, you eventually reach the
access type listed in the tbaa tag node.
Reviewers: dexonsmith, chandlerc, reames, mehdi_amini, manmanren
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D26438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289402 91177308-0d34-0410-b5e6-96231b3b80d8
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288683 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
D26704 fixed the non-determinism in codegen by sorting basic blocks before
iteration so as to have a defined iteration order. As a result we need to fix
the names (numbers) of the temporaries in the following unit tests:
test/Transforms/Util/MemorySSA/multi-edges.ll
test/Transforms/Util/MemorySSA/multiple-backedges-hal.ll
Reviewers: dberlin, david2050, mgrang
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26926
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287575 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the non-determinism caused due to iterating SmallPtrSet's
which was uncovered due to the experimental "reverse iteration order " patch:
https://reviews.llvm.org/D26718
The following unit tests failed because of the undefined order of iteration.
LLVM :: Transforms/Util/MemorySSA/cyclicphi.ll
LLVM :: Transforms/Util/MemorySSA/many-dom-backedge.ll
LLVM :: Transforms/Util/MemorySSA/many-doms.ll
LLVM :: Transforms/Util/MemorySSA/phi-translation.ll
Reviewers: dberlin, mgrang
Subscribers: dberlin, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D26704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287563 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
Thanks to Adrian Prantl for stewarding this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285094 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Utility pass to remove gc.relocates created by rewrite statepoints for GC.
With respect to safepoint verification, the IR generated would be incorrect, and cannot run
as such.
This would be a single transformation on the final optimized IR.
The benefit of the pass is for easy analysis when the IRs are 'polluted' by too
many gc.relocates.
Added tests.
test run: All RS4GC tests with -verify option. Local downstream tests on large
IR files. This also works when the pointer being gc.relocated is another
gc.relocate.
Reviewers: sanjoy, reames
Subscribers: beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25096
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284855 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pass shrink-wraps a condition to some library calls where the call
result is not used. For example:
sqrt(val);
is transformed to
if (val < 0)
sqrt(val);
Even if the result of library call is not being used, the compiler cannot
safely delete the call because the function can set errno on error
conditions.
Note in many functions, the error condition solely depends on the incoming
parameter. In this optimization, we can generate the condition can lead to
the errno to shrink-wrap the call. Since the chances of hitting the error
condition is low, the runtime call is effectively eliminated.
These partially dead calls are usually results of C++ abstraction penalty
exposed by inlining. This optimization hits 108 times in 19 C/C++ programs
in SPEC2006.
Reviewers: hfinkel, mehdi_amini, davidxl
Subscribers: modocache, mgorny, mehdi_amini, xur, llvm-commits, beanz
Differential Revision: https://reviews.llvm.org/D24414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284542 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283473 91177308-0d34-0410-b5e6-96231b3b80d8
When phi nodes are created in the -mem2reg phase, the @llvm.dbg.declare
entries are converted to @llvm.dbg.value entries at the place where the
store instructions existed. However no entry is created to describe
the resulting value of the phi node.
The effect of this is especially noticeable in for loops which have a
constant for the intial value; the loop control variable's location
would be described as the intial constant value in the loop body once
the -mem2reg optimization phase was run.
This change adds the creation of the @llvm.dbg.value entries to describe
variables whose location is the result of a phi node created in -mem2reg.
Also when the phi node is finally lowered to a machine instruction it
is important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Differential Revision: https://reviews.llvm.org/D23715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281895 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In the use optimizer, we need to keep of whether the lower bound still
dominates us or else we may decide a lower bound is still valid when it
is not due to intervening pushes/pops. Fixes PR28880 (and probably a
bunch of other things).
Reviewers: george.burgess.iv
Subscribers: MatzeB, llvm-commits, sebpop
Differential Revision: https://reviews.llvm.org/D23237
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277978 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r277637. It teaches MemorySSA that invariant
loads (and loads of provably constant memory) are always liveOnEntry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277640 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes MemorySSA recognize atomic/volatile loads, and makes
MSSA treat said loads specially. This allows us to be a bit more
aggressive in some cases.
Administrative note: Revision was LGTM'ed by reames in person.
Additionally, this doesn't include the `invariant.load` recognition in
the differential revision, because I feel it's better to commit that
separately. Will commit soon.
Differential Revision: https://reviews.llvm.org/D16875
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277637 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates MemorySSA's use-optimizing walker to be more
accurate and, in some cases, faster.
Essentially, this changed our core walking algorithm from a
cache-as-you-go DFS to an iteratively expanded DFS, with all of the
caching happening at the end. Said expansion happens when we hit a Phi,
P; we'll try to do the smallest amount of work possible to see if
optimizing above that Phi is legal in the first place. If so, we'll
expand the search to see if we can optimize to the next phi, etc.
An iteratively expanded DFS lets us potentially quit earlier (because we
don't assume that we can optimize above all phis) than our old walker.
Additionally, because we don't cache as we go, we can now optimize above
loops.
As an added bonus, this patch adds a ton of verification (if
EXPENSIVE_CHECKS are enabled), so finding bugs is easier.
Differential Revision: https://reviews.llvm.org/D21777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275940 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the new pass manager to MemorySSA pass.
Change MemorySSA to be computed eagerly upon construction.
Change MemorySSAWalker to be owned by the MemorySSA object that creates
it.
Reviewers: dberlin, george.burgess.iv
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19664
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271432 91177308-0d34-0410-b5e6-96231b3b80d8
Adrian Prantl