The recommit fixes three bugs: The first one is to use CurrentBlock instead of
PREInstr's Parent as param of performScalarPREInsertion because the Parent
of a clone instruction may be uninitialized. The second one is stop PRE when
CurrentBlock to its predecessor is a backedge and an operand of CurInst is
defined inside of CurrentBlock. The same value defined inside of loop in last
iteration can not be regarded as available. The third one is an out-of-bound
array access in a flipped if guard.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306313 91177308-0d34-0410-b5e6-96231b3b80d8
This was reverted in r306252, but I already had the bug fixed and was
just trying to form a test case.
The original commit factored the logic for forming dedicated exits
inside of LoopSimplify into a helper that could be used elsewhere and
with an approach that required fewer intermediate data structures. See
that commit for full details including the change to the statistic, etc.
The code looked fine to me and my reviewers, but in fact didn't handle
indirectbr correctly -- it left the 'InLoopPredecessors' vector dirty.
If you have code that looks *just* right, you can end up leaking these
predecessors into a subsequent rewrite, and crash deep down when trying
to update PHI nodes for predecessors that don't exist.
I've added an assert that makes the bug much more obvious, and then
changed the code to reliably clear the vector so we don't get this bug
again in some other form as the code changes.
I've also added a test case that *does* manage to catch this while also
giving some nice positive coverage in the face of indirectbr.
The real code that found this came out of what I think is CPython's
interpreter loop, but any code with really "creative" interpreter loops
mixing indirectbr and other exit paths could manage to tickle the bug.
I was hard to reduce the original test case because in addition to
having a particular pattern of IR, the whole thing depends on the order
of the predecessors which is in turn depends on use list order. The test
case added here was designed so that in multiple different predecessor
orderings it should always end up going down the same path and tripping
the same bug. I hope. At least, it tripped it for me without
manipulating the use list order which is better than anything bugpoint
could do...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306257 91177308-0d34-0410-b5e6-96231b3b80d8
I did some basic testing while looking for a bug in my recent change to
loop simplify and even though it didn't find the bug it seems like
a useful improvement anyways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306256 91177308-0d34-0410-b5e6-96231b3b80d8
This leads to a segfault. Chandler already has a test case and should be
able to recommit with a fix soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306252 91177308-0d34-0410-b5e6-96231b3b80d8
http://rise4fun.com/Alive/i8Q
A narrow bitwise logic op is obviously better than math for value tracking,
and zext is better than sext. Typically, the 'not' will be folded into an
icmp predicate.
The IR difference would even survive through codegen for x86, so we would see
worse code:
https://godbolt.org/g/C14HMF
one_or_zero(int, int): # @one_or_zero(int, int)
xorl %eax, %eax
cmpl %esi, %edi
setle %al
retq
one_or_zero_alt(int, int): # @one_or_zero_alt(int, int)
xorl %ecx, %ecx
cmpl %esi, %edi
setg %cl
movl $1, %eax
subl %ecx, %eax
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306243 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
InstCombine replaces large allocas with small globals consts causing buffer overflows
on valid code, see PR33372.
This fix permits this optimization only if the global is dereference for alloca size.
Fixes PR33372
Reviewers: eugenis, majnemer, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34311
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306194 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: visitSwitchInst should not take INT_MAX when Cost is negative. Instead of INT_MAX , we also use a valid upperbound cost when overflow occurs in Cost.
Reviewers: hans, echristo, dmgreen
Reviewed By: dmgreen
Subscribers: mcrosier, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D34436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306118 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Many languages have a three way comparison idiom where comparing two values
produces not a boolean, but a tri-state value. Typical values (e.g. as used in
the lcmp/fcmp bytecodes from Java) are -1 for less than, 0 for equality, and +1
for greater than.
We actually do a great job already of converting three way comparisons into
binary comparisons when the result produced has one a single use. Unfortunately,
such values can have more than one use, and in that case, our existing
optimizations break down.
The patch adds a peephole which converts a three-way compare + test idiom into a
binary comparison on the original inputs. It focused on replacing the test on
the result of the three way compare and does nothing about removing the three
way compare itself. That's left to other optimizations (which do actually kick
in commonly.)
We currently recognize one idiom on signed integer compare. In the future, we
plan to recognize and simplify other comparison idioms on
other signed/unsigned datatypes such as floats, vectors etc.
This is a resurrection of Philip Reames' original patch:
https://reviews.llvm.org/D19452
Reviewers: majnemer, apilipenko, reames, sanjoy, mkazantsev
Reviewed by: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34278
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306100 91177308-0d34-0410-b5e6-96231b3b80d8
I want to use the same logic as LoopSimplify to form dedicated exits in
another pass (SimpleLoopUnswitch) so I wanted to factor it out here.
I also noticed that there is a pretty significantly more efficient way
to implement this than the way the code in LoopSimplify worked. We don't
need to actually retain the set of unique exit blocks, we can just
rewrite them as we find them and use only a set to deduplicate.
This did require changing one part of LoopSimplify to not re-use the
unique set of exits, but it only used it to check that there was
a single unique exit. That part of the code is about to walk the exiting
blocks anyways, so it seemed better to rewrite it to use those exiting
blocks to compute this property on-demand.
I also had to ditch a statistic, but it doesn't seem terribly valuable.
Differential Revision: https://reviews.llvm.org/D34049
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306081 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: LVI can reason about an AND of icmps on the true dest of a branch. I believe we can do similar for the false dest of ORs. This allows us to get the same answer for the demorganed versions of some of the AND test cases as you can see.
Reviewers: anna, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306076 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently, we incorrectly update exit blocks of loops when there are multiple
edges from a single exiting block to the exit block. This can happen when we
have switches as the terminator of the exiting blocks.
The fix here is to correctly update the phi nodes in the exit block, and remove
all incoming values *except* for one which is from the preheader.
Note: Currently, this error can manifest only while deleting non-executed loops. However, it
is possible to trigger this error in invariant loops, once we enhance the logic
around the exit conditions for the loop check.
Reviewers: chandlerc, dberlin, sanjoy, efriedma
Reviewed by: efriedma
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D34516
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306048 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
InstCombine likes to turn (icmp eq (and X, C1), 0) into (icmp slt (trunc (X)), 0) sometimes. This breaks foldSelectICmpAndOr's ability to recognize (select (icmp eq (and X, C1), 0), Y, (or Y, C2))->(or (shl (and X, C1), C3), y).
This patch tries to recover this. I had to flip around some of the early out checks so that I could create a new And instruction during the compare processing without it possibly never getting used.
Reviewers: spatel, majnemer, davide
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306029 91177308-0d34-0410-b5e6-96231b3b80d8
There are 2 parts to this patch made simultaneously to avoid a regression.
We're reversing the canonicalization that moves bitwise vector ops before bitcasts.
We're moving bitwise vector ops *after* bitcasts instead. That's the 1st and 3rd hunks
of the patch. The motivation is that there's only one fold that currently depends on
the existing canonicalization (see next), but there are many folds that would
automatically benefit from the new canonicalization.
PR33138 ( https://bugs.llvm.org/show_bug.cgi?id=33138 ) shows why/how we have these
patterns in IR.
There's an or(and,andn) pattern that requires an adjustment in order to continue matching
to 'select' because the bitcast changes position. This match is unfortunately complicated
because it requires 4 logic ops with optional bitcast and sext ops.
Test diffs:
1. The bitcast.ll and bitcast-bigendian.ll changes show the most basic difference -
bitcast comes before logic.
2. There are also tests with no diffs in bitcast.ll that verify that we're still doing
folds that were enabled by the previous canonicalization.
3. icmp-xor-signbit.ll shows the payoff. We don't need to adjust existing icmp patterns
to look through bitcasts.
4. logical-select.ll contains several tests for the or(and,andn) --> select fold to
verify that we are still handling those cases. The lone diff shows the movement of
the bitcast from the new canonicalization rule.
Differential Revision: https://reviews.llvm.org/D33517
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306011 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305960 91177308-0d34-0410-b5e6-96231b3b80d8
This attribute is used to ensure the guard page is triggered on stack
overflow. Stack frames larger than the guard page size will generate
a call to __probestack to touch each page so the guard page won't
be skipped.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D34386
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305939 91177308-0d34-0410-b5e6-96231b3b80d8
I don't think there's any visible difference from having the wrong layout
for the 32-bit case at this point, but that could change in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305931 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I noticed that passing known bits across these intrinsics isn't great at capturing the information we really know. Turning known bits of the input into known bits of a count output isn't able to convey a lot of what we really know.
This patch adds range metadata to these intrinsics based on the known bits.
Currently the patch punts if we already have range metadata present.
Reviewers: spatel, RKSimon, davide, majnemer
Reviewed By: RKSimon
Subscribers: sanjoy, hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D32582
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305927 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously this folding had no checks to see if it was going to result in less instructions. This was pointed out during the review of D34184
This patch adds code to count how many instructions its going to create vs how many its going to remove so we can make a proper decision.
Reviewers: spatel, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34437
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305926 91177308-0d34-0410-b5e6-96231b3b80d8
MulOpsInlineThreshold option of SCEV is defaulted to 1000, which is inadequately high.
When constructing SCEVs of expressions like:
x1 = a * a
x2 = x1 * x1
x3 = x2 * x2
...
We actually have huge SCEVs with max allowed amount of operands inlined.
Such expressions are easy to get from unrolling of loops looking like
x = a
for (i = 0; i < n; i++)
x = x * x
Or more tricky cases where big powers are involved. If some non-linear analysis
tries to work with a SCEV that has 1000 operands, it may lead to excessively long
compilation. The attached test does not pass within 1 minute with default threshold.
This patch decreases its default value to 32, which looks much more reasonable if we
use analyzes with complexity O(N^2) or O(N^3) working with SCEV.
Differential Revision: https://reviews.llvm.org/D34397
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305882 91177308-0d34-0410-b5e6-96231b3b80d8
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305802 91177308-0d34-0410-b5e6-96231b3b80d8
These diffs were in the last version of the patch in D33342,
but I accidentally committed the previous rev.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305793 91177308-0d34-0410-b5e6-96231b3b80d8
We have a large portfolio of folds for and-of-icmps and or-of-icmps in InstSimplify and InstCombine,
but hardly anything for xor-of-icmps. Rather than trying to rethink and translate all of those folds,
we can use the truth table definition of xor:
X ^ Y --> (X | Y) & !(X & Y)
...to see if we can convert the xor to and/or and then use the existing folds.
http://rise4fun.com/Alive/J9v
Differential Revision: https://reviews.llvm.org/D33342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305792 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Existing heuristic uses the ratio between the function entry
frequency and the loop invocation frequency to find cold loops. However,
even if the loop executes frequently, if it has a small trip count per
each invocation, vectorization is not beneficial. On the other hand,
even if the loop invocation frequency is much smaller than the function
invocation frequency, if the trip count is high it is still beneficial
to vectorize the loop.
This patch uses estimated trip count computed from the profile metadata
as a primary metric to determine coldness of the loop. If the estimated
trip count cannot be computed, it falls back to the original heuristics.
Reviewers: Ayal, mssimpso, mkuper, danielcdh, wmi, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32451
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305729 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some optimizations in AddReachableCodeToWorklist did not update
the MadeIRChange state. This could happen both when removing
trivially dead instructions (DCE) and at constant folds.
It is essential that changes to the IR is reported correctly,
since for example InstCombinePass::run() will indicate that all
analyses are preserved otherwise.
And the CGPassManager determines if the CallGraph is up-to-date
based on status from InstructionCombiningPass::runOnFunction().
The new test case early_dce_clobbers_callgraph.ll is a reproducer
for some asserts that started to trigger after changes in the
inliner in r305245. With this patch the test case passes again.
Reviewers: sanjoy, craig.topper, dblaikie
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305725 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These 4 patterns have the same one use check repeated twice for each. Once without a cast and one with. But the cast has no effect on what method is called.
For the OR case I believe it is always profitable regardless of the number of uses since we'll never increase the instruction count.
For the AND case I believe it is profitable if the pair of xors has one use such that we'll get rid of it completely. Or if the C value is something freely invertible, in which case the not doesn't cost anything.
Reviewers: spatel, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34308
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305705 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently we don't try to do anything with vector xors.
This patch adds support for removing duplicate pairs from a chain of vector xors as its pretty easy to support. We still dont' try to combine the xors with and/ors, but I might try that in a future patch.
Reviewers: mcrosier, davide, resistor
Reviewed By: mcrosier
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305704 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: use AA to tell whether a load can be moved before a call that writes to memory.
Reviewers: dberlin, davide, sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D34115
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305698 91177308-0d34-0410-b5e6-96231b3b80d8
Current implementation of SCEVExpander demonstrates a very naive behavior when
it deals with power calculation. For example, a SCEV for x^8 looks like
(x * x * x * x * x * x * x * x)
If we try to expand it, it generates a very straightforward sequence of muls, like:
x2 = mul x, x
x3 = mul x2, x
x4 = mul x3, x
...
x8 = mul x7, x
This is a non-efficient way of doing that. A better way is to generate a sequence of
binary power calculation. In this case the expanded calculation will look like:
x2 = mul x, x
x4 = mul x2, x2
x8 = mul x4, x4
In some cases the code size reduction for such SCEVs is dramatic. If we had a loop:
x = a;
for (int i = 0; i < 3; i++)
x = x * x;
And this loop have been fully unrolled, we have something like:
x = a;
x2 = x * x;
x4 = x2 * x2;
x8 = x4 * x4;
The SCEV for x8 is the same as in example above, and if we for some reason
want to expand it, we will generate naively 7 multiplications instead of 3.
The BinPow expansion algorithm here allows to keep code size reasonable.
This patch teaches SCEV Expander to generate a sequence of BinPow multiplications
if we have repeating arguments in SCEVMulExpressions.
Differential Revision: https://reviews.llvm.org/D34025
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305663 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows strlen to be moved out of the loop in case its argument is
not modified in the loop in LICM.
Reviewers: hfinkel, davide, sanjoy, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34323
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305641 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When we fold vector constants that are operands of phi's that feed into select,
we need to set the correct insertion point for the *new* selects that get generated.
The correct insertion point is the incoming block for the phi.
Such cases can occur with patch r298845, which fixed folding of
vector constants, but the new selects could be inserted incorrectly (as the added
test case shows).
Reviewers: majnemer, spatel, sanjoy
Reviewed by: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34162
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305591 91177308-0d34-0410-b5e6-96231b3b80d8
Dehao Chen