append "exit <retcode>" to the end of the output file. This is used by
the nightly tester to make bugpoint match the output generated by the
RunSafely.sh script so it doesn't find false positives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31960 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
Remove predicate simplifier from default gcc3 pipeline. New design is too
slow to enable by default.
Add new testcases for problems encountered in development.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31895 91177308-0d34-0410-b5e6-96231b3b80d8
Fix an infinite loop in the Linker and a few other assorted link problems.
Patch contributed by Scott Michel. Thanks, Scott!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31680 91177308-0d34-0410-b5e6-96231b3b80d8
speed up, it sometimes makes it crash on complex bc files, which isn't very nice.
With this, bugpoint can reduce the 176.gcc failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31589 91177308-0d34-0410-b5e6-96231b3b80d8
miscompilation. This is useful for working around GCC+CBE bugs or for handling
programs that CBE doesn't support (e.g. inline asm) when searching for
optimizer bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31588 91177308-0d34-0410-b5e6-96231b3b80d8
This patch converts the old SHR instruction into two instructions,
AShr (Arithmetic) and LShr (Logical). The Shr instructions now are not
dependent on the sign of their operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31542 91177308-0d34-0410-b5e6-96231b3b80d8
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31380 91177308-0d34-0410-b5e6-96231b3b80d8
Make necessary changes to support DIV -> [SUF]Div. This changes llvm to
have three division instructions: signed, unsigned, floating point. The
bytecode and assembler are bacwards compatible, however.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31195 91177308-0d34-0410-b5e6-96231b3b80d8
initializers as well. This is only a first pass. It can be slow because
it clones the module for each pass. An obvious improvement is not to do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31182 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
DLL* linkages got full (I hope) codegeneration support in C & both x86
assembler backends.
External weak linkage added for future use, we don't provide any
codegeneration, etc. support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30374 91177308-0d34-0410-b5e6-96231b3b80d8
This pass:
1. Splits TargetMachine into TargetMachine (generic targets, can be implemented
any way, like the CBE) and LLVMTargetMachine (subclass of TM that is used by
things using libcodegen and other support).
2. Instead of having each target fully populate the passmgr for file or JIT
output, move all this to common code, and give targets hooks they can
implement.
3. Commonalize the target population stuff between file emission and JIT
emission.
4. All (native code) codegen stuff now happens in a FunctionPassManager, which
paves the way for "fast -O0" stuff in the CFE later, and now LLC could
lazily stream .bc files from disk to use less memory.
5. There are now many fewer #includes and the targets don't depend on the
scalar xforms or libanalysis anymore (but codegen does).
6. Changing common code generator pass ordering stuff no longer requires
touching all targets.
7. The JIT now has the option of "-fast" codegen or normal optimized codegen,
which is now orthogonal to the fact that JIT'ing is being done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30081 91177308-0d34-0410-b5e6-96231b3b80d8
Close out this long standing bug by removing the remaining overloaded
virtual functions in LLVM. The -Woverloaded-virtual option is now turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29934 91177308-0d34-0410-b5e6-96231b3b80d8
Remove exception throwing/handling from lib/Bytecode, and adjust its users
to compensate for changes in the interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29875 91177308-0d34-0410-b5e6-96231b3b80d8
Remove exception handling from the bytecode archiver and adjust the llvm-ar
tool to accommodate the new interfaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29866 91177308-0d34-0410-b5e6-96231b3b80d8
Remove exceptions from the Path::create*OnDisk methods. Update their users
to handle error messages via arguments and result codes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29840 91177308-0d34-0410-b5e6-96231b3b80d8
memory pressure. This order spaces out large executables with small ones in
between so that in a -j2 or -j3 build, it only attempts to build only one
large executable at time. If you're doing -j4, you probably have enuogh
memory anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29835 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust usage of the ExecuteAndWait function to use the last argument which
is the ErrMsg string. This is necessitated because this function no longer
throws exceptions on error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29791 91177308-0d34-0410-b5e6-96231b3b80d8
Make sys::Program::ExecuteAndWait not throw exceptions and update any
affected code. It now return -9999 to signal that the program couldn't be
executed. Only one case (in bugpoint) actually examines the result code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29785 91177308-0d34-0410-b5e6-96231b3b80d8
with the -verify pass option. It is also more accurate in that this option
causes a verify option to be run after every pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29782 91177308-0d34-0410-b5e6-96231b3b80d8
one-off (and broken) RunOptimizations function. Also, run some cleanup
passes after the user's loaded passes run. This make sure to clean up
any cruft left around by thos passes.
This patch was inspired by a patch submitted by Bram Adams.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29781 91177308-0d34-0410-b5e6-96231b3b80d8
Rid the Assembly Parser of exceptions. This is a really gross hack but it
will do until the Assembly Parser is re-written as a recursive descent.
The basic premise is that wherever the old "ThrowException" function was
called (new name: GenerateError) we set a flag (TriggerError). Every
production checks that flag and calls YYERROR if it is set. Additionally,
each call to ThrowException in the grammar is replaced with GEN_ERROR
which calls GenerateError and then YYERROR immediately. This prevents
the remaining production from continuing after an error condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29763 91177308-0d34-0410-b5e6-96231b3b80d8
Shrinkify LLVM's footprint by removing the analyze tool and moving its
functionality into the opt tool. THis eliminates one of the largest tools
from LLVM and doesn't make opt much bigger because it already included
most of the analysis passes. To get the old analyze functionality pass
the -analyze option to opt. Note that the integeration here is dead
simple. The "main" of analyze was just copied to opt and invoked if the
-analyze option was given. There may be opportunities for further
integration such as removing the distinction between transform passes
and analysis passes.
To use the analysis functionality, if you previously did this:
analyze $FNAME -domset -disable-verify
you would now do this:
opt -analyze $FNAME -domset -disable-verify
Pretty simple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29762 91177308-0d34-0410-b5e6-96231b3b80d8
Enable the makefile check on the result of find-cycles.pl. LLVM is now
cycle free and we intend to keep it that way. This patch will fail the
build if cycles are found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29517 91177308-0d34-0410-b5e6-96231b3b80d8
instead of throwing an exception. This reduces the amount of code that is
exposed to exceptions (e.g. FileUtilities), though it is clearly only one step
along the way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29395 91177308-0d34-0410-b5e6-96231b3b80d8
This is faster because SplitFunctionsOutOfModule no longer calls Clone Module and then removes the functions it doesnt want from the module returned. Instead it creates a module and copies over the specified functions, making changes to the new and old module where neccessary. This reduces the memory demand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29379 91177308-0d34-0410-b5e6-96231b3b80d8
have a compile-host version of "nm", not build-host. In order to effect this
we must use autoconf to determine the correct "nm" to use and propagate that
through the makefiles, through llvm-config and finally to GenLibDeps.pl as
an optional argument.
Patch contributed by Anton Korobeynikov. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29368 91177308-0d34-0410-b5e6-96231b3b80d8
dependency is found. The find-cycles.pl script now exits with a return code
that equals the number of cycles found. The Makefile was changed to ignore
the status code of find-cycles.pl. This should be removed once the libraries
are free of cyclic dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29290 91177308-0d34-0410-b5e6-96231b3b80d8
This works around bugs in some versions of the cygwin linker.
Patch contributed by Anton Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29239 91177308-0d34-0410-b5e6-96231b3b80d8
Don't both with the "C" and "cc" extensions as they aren't common and they
the "C" extension conflicts with the "c" extension on operating systems
that have case insensitive file names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28899 91177308-0d34-0410-b5e6-96231b3b80d8
recognized as such! This prevents the CppWriter from treating every
operand as a forward reference and making a mess of the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28800 91177308-0d34-0410-b5e6-96231b3b80d8
which allows it to debug optimizer infinite loops. This patch is contributed
by Nick Lewycky, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28763 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add #includes to LinkAllVMCore.h to get Mangler.o and InlineAsm.o
2. Make Mangler.h and InlineAsm.h use the macros to ensure linkage
3. Make each of the tools with --load options include LinkAllVMCore.h
This should be the last set of changes for this bug and 800.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28719 91177308-0d34-0410-b5e6-96231b3b80d8
1. llvm is built with objroot = OBJ and installed.
2. OBJ is deleted or install tree is shipped.
3. llvm-config is run.
In this scenario, llvm-config shouldn't emit an error message at #3, it
should just know it's not running in the objdir :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28704 91177308-0d34-0410-b5e6-96231b3b80d8
This can be used for tools that want makefile rules to depend on the libraries
(e.g. so the tool is relinked when a library changes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28701 91177308-0d34-0410-b5e6-96231b3b80d8
through to gcc when its being used as a linker. This allows -L and -l
(and any other) options to be added so that non-complete bytecode files
can be processed with bugpoint. The -Xlinker option can be added as many
times as needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28692 91177308-0d34-0410-b5e6-96231b3b80d8
If installed, ignore the prefix the tree is configured with: always use the
prefix that llvm-config is currently at, which may be different if the tree
was moved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28669 91177308-0d34-0410-b5e6-96231b3b80d8
BCWriter, and bzip2 libraries. Adjust the various makefiles to accommodate
these changes. This was done to speed up link times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28610 91177308-0d34-0410-b5e6-96231b3b80d8
mess as functions were moved around into a better ordering. The code was
extended to provide various -gen-* options to better control what the
generated output should be. Currently it is possible to generate entire
modules (three different ways), functions, global variables, and types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28589 91177308-0d34-0410-b5e6-96231b3b80d8
a floating point conversion problem with NAN in intrinsics.ll. llvm2cpp
makes an attempt to provide the correct conversion, based on the
implementation in the CBackend writer, but it doesn't get NAN correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28568 91177308-0d34-0410-b5e6-96231b3b80d8
1. Get rid of old AsmWriter cruft that's not needed.
2. Implement several instructions. Enough to get by globalvars.ll and
alignment.ll in the Feature test suite.
3. Handle constants properly (don't repeat definitions).
4. Make the output compatible with llvm-dis for diff purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28541 91177308-0d34-0410-b5e6-96231b3b80d8
1. Return the module from the MakeModule function so it can be verified.
2. Make sure types get generated with their names
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28536 91177308-0d34-0410-b5e6-96231b3b80d8
This is a safekeeping commit. The program is not finished. It currently
handles modules, types, global variables and function declarations. Blocks
and instructions remain to be done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28528 91177308-0d34-0410-b5e6-96231b3b80d8
Minor tweaks in public headers and a few .cpp files so that LLVM can build
successfully with -pedantic and projects using LLVM with -pedantic don't
get warnings from LLVM. There's still more -pedantic warnings to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28453 91177308-0d34-0410-b5e6-96231b3b80d8
Don't check in the LibDeps.txt and FinalLibDeps.txt files to CVS because
the content differs from platform to platform. Instead, adjust the makefile
so that a dummy llvm-config is built if Perl is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28084 91177308-0d34-0410-b5e6-96231b3b80d8
1. If Perl is not available, don't run Perl dependent targets.
2. Check in FinalLibDeps.txt for build environments that can't build it
because there's no Perl processor.
3. Ensure that FinalLibDeps.txt depends on LibDeps.txt so it is
automatically regenerated.
4. Support objdir != srcdir building.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27915 91177308-0d34-0410-b5e6-96231b3b80d8
1. Check for Perl and only build llvm-config if its available.
2. Add some virtual components
3. Don't depend on "standard" location for Perl, but configured location
4. Document the tool with a POD file.
This version is now ready for testing by users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27005 91177308-0d34-0410-b5e6-96231b3b80d8
1. LLVMCBackend.o now depends on LLVMCodeGen.o (why we're not sure)
2. LLVMExecutionEngine.o no longer depends on LLVMInterpreter.o nor LLVMJIT.o
Thanks, Chris.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26976 91177308-0d34-0410-b5e6-96231b3b80d8
is a handy tool for users of LLVM who want to be able to quickly get
information about LLVM's configuration. It is intended to be used in the
command line of other tools. Documentation will be forthcoming in a
subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26952 91177308-0d34-0410-b5e6-96231b3b80d8
makefile using the utils/GenLibDeps.pl script with the -flat option. It
records the dependencies between libraries in such a way that the
llvm-config script can easily read it (in makefile dependency format).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26876 91177308-0d34-0410-b5e6-96231b3b80d8
the rule for building the LibDeps.txt file using GenLibDeps.pl. This needs
to be done from time to time manually in order to keep LibDeps.txt up to
date.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26875 91177308-0d34-0410-b5e6-96231b3b80d8
almost impossible with the new CFE. It now guarantees that the static
ctor/dtor list is correctly split between the modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26624 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for running static ctor/dtors that aren't handled by __main.
This fixes programs with the JIT and the new CFE, such as HBD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26620 91177308-0d34-0410-b5e6-96231b3b80d8
