Currently getOptimalMemOpType returns i32 for large enough sizes without
checking for alignment, leading to poor code generation when misaligned accesses
aren't permitted as we generate a word store then later split it up into byte
stores. This means we inadvertantly go over the MaxStoresPerMemcpy limit and for
memset we splat the memset value into a word then immediately split it up
again.
Fix this by leaving it up to FindOptimalMemOpLowering to figure out which type
to use, but also fix a bug there where it wasn't correctly checking if
misaligned memory accesses are allowed.
Differential Revision: https://reviews.llvm.org/D33442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303990 91177308-0d34-0410-b5e6-96231b3b80d8
Re-commit r303937 + r303949 as they were not the cause for the build
failures.
We do not track liveness of reserved registers so adding them to the
liveins list in computeLiveIns() was completely unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303970 91177308-0d34-0410-b5e6-96231b3b80d8
Tentatively revert this to see if it fixes the buildbot stage2
breakages.
This reverts commit r303938.
This reverts commit r303954.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303960 91177308-0d34-0410-b5e6-96231b3b80d8
Tentatively revert, suspecting that it caused breakage in stage2
buildbots.
This reverts commit r303949.
This reverts commit r303937.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303955 91177308-0d34-0410-b5e6-96231b3b80d8
We may have situations in which a superregister is reserved and not
added to liveins, so we have to add the subregisters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303949 91177308-0d34-0410-b5e6-96231b3b80d8
- addLiveOutsNoPristines() needs to add callee saved registers that are
actually saved and restored somewhere to the set (they are not
pristine).
- Cleanup/rewrite the code for addLiveOuts()/addLiveOutsNoPristines().
This fixes the problem from D32156.
Differential Revision: https://reviews.llvm.org/D32464
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303938 91177308-0d34-0410-b5e6-96231b3b80d8
We do not track liveness of reserved registers so adding them to the
liveins list in computeLiveIns() was completely unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303937 91177308-0d34-0410-b5e6-96231b3b80d8
Previously this code was defensive to the situation in which the debug
info scopes would lead to a different subprogram from the subprogram in
the CU's subprogram list (this could've happened with linkonce
functions, etc as per the comment being removed). Since the CU<>SP link
reversal this is no longer possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303933 91177308-0d34-0410-b5e6-96231b3b80d8
Rename the DEBUG_TYPE to match the names of corresponding passes where
it makes sense. Also establish the pattern of simply referencing
DEBUG_TYPE instead of repeating the passname where possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303921 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, every time we wanted to serialize a field list record, we
would create a new copy of FieldListRecordBuilder, which would in turn
create a temporary instance of TypeSerializer, which itself had a
std::vector<> that was about 128K in size. So this 128K allocation was
happening every time. We can re-use the same instance over and over, we
just have to clear its internal hash table and seen records list between
each run. This saves us from the constant re-allocations.
This is worth an ~18.5% speed increase (3.75s -> 3.05s) in my tests.
Differential Revision: https://reviews.llvm.org/D33506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303919 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out gold doesn't use the DW_AT_GNU_pubnames to decide whether to
parse the rest of the DIEs when building gdb-index. This causes gold to
trip over LLVM's output when there are DW_FORM_ref_addr present.
Gold does use the presence of a debug_gnu_pub{names,types} entry for the
CU to skip parsing the debug_info portion, so make sure that's included
even when empty (technically, when empty there couldn't be any ref_addr
anyway - it only came up when gmlt didn't produce any (even non-empty)
pubnames - but given what that reveals about gold's implementation, this
seems like a good thing to do for consistency).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303894 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a fix for PR32538. MachineCSE first looks at MO.isDead(), but
if it is not marked dead, MachineCSE still wants to do its own check
to see if it is trivially dead. This check for the trivial case
assumed that physical registers cannot be live out of a block.
Patch by Mattias Eriksson.
Reviewers: qcolombet, jbhateja
Reviewed By: qcolombet, jbhateja
Subscribers: jbhateja, llvm-commits
Differential Revision: https://reviews.llvm.org/D33408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303731 91177308-0d34-0410-b5e6-96231b3b80d8
C++14 added user-defined literal support for complex numbers so that you can
write something like "complex<double> val = 2i". However, there is an existing
GNU extension supporting this syntax and interpreting the result as a _Complex
type.
This changes parsing so that such literals are interpreted in terms of C++14's
operators if an overload is present but otherwise falls back to the original
GNU extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303694 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch makes instruction fusion more aggressive by
* adding artificial edges between the successors of FirstSU and
SecondSU, similar to BaseMemOpClusterMutation::clusterNeighboringMemOps.
* updating PostGenericScheduler::tryCandidate to keep clusters together,
similar to GenericScheduler::tryCandidate.
This change increases the number of AES instruction pairs generated on
Cortex-A57 and Cortex-A72. This doesn't change code at all in
most benchmarks or general code, but we've seen improvement on kernels
using AESE/AESMC and AESD/AESIMC.
Reviewers: evandro, kristof.beyls, t.p.northover, silviu.baranga, atrick, rengolin, MatzeB
Reviewed By: evandro
Subscribers: aemerson, rengolin, MatzeB, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303618 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
This reapplies r303566 without any modifications. The stage2 build
failures persisted even after reverting this patch, and looking back
through history, it looks like these tests are flaky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303575 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303461 91177308-0d34-0410-b5e6-96231b3b80d8
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303446 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
While this makes some case better and some case worse - so it's unclear if it is a worthy combine just by itself - this is a useful canonicalisation.
As per discussion in D32756 .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32916
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303441 91177308-0d34-0410-b5e6-96231b3b80d8
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303409 91177308-0d34-0410-b5e6-96231b3b80d8
pruneSubRegValues() needs to remove subregister ranges starting at
instructions that later get removed by eraseInstrs(). It missed to check
one case in which eraseInstrs() would remove an instruction.
Fixes http://llvm.org/PR32688
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303396 91177308-0d34-0410-b5e6-96231b3b80d8
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303388 91177308-0d34-0410-b5e6-96231b3b80d8
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303369 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303362 91177308-0d34-0410-b5e6-96231b3b80d8
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303360 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303341 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are several places in the codebase that try to calculate a maximum value in a Statistic object. We currently do this in one of two ways:
MaxNumFoo = std::max(MaxNumFoo, NumFoo);
or
MaxNumFoo = (MaxNumFoo > NumFoo) ? MaxNumFoo : NumFoo;
The first version reads from MaxNumFoo one time and uncontionally rwrites to it. The second version possibly reads it twice depending on the result of the first compare. But we have no way of knowing if the value was changed by another thread between the reads and the writes.
This patch adds a method to the Statistic object that can ensure that we only store if our value is the max and the previous max didn't change after we read it. If it changed we'll recheck if our value should still be the max or not and try again.
This spawned from an audit I'm trying to do of all places we uses the implicit conversion to unsigned on the Statistics objects. See my previous thread on llvm-dev https://groups.google.com/forum/#!topic/llvm-dev/yfvxiorKrDQ
Reviewers: dberlin, chandlerc, hfinkel, dblaikie
Reviewed By: chandlerc
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D33301
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303318 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303292 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure IRTranslator->MachineIRBuilder->DebugLoc doesn't
outlive the DILocation. Clear it at the end of
IRTranslator::runOnMachineFunction
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303277 91177308-0d34-0410-b5e6-96231b3b80d8
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303271 91177308-0d34-0410-b5e6-96231b3b80d8
Don't allow -optimize-regalloc=false with -regalloc given for anything other
than 'fast'. The other register allocators depend on the supporting passes
added by addOptimizedRegAlloc().
Reviewers: Quentin Colombet, Matthias Braun
https://reviews.llvm.org/D33181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303238 91177308-0d34-0410-b5e6-96231b3b80d8
