Several integer multiply/divide instructions require use of a
register pair as input and output. This patch moves setting
up the input register pair from C++ code to TableGen, simplifying
the whole process and making it more easily extensible.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307155 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes a couple of whitespace errors, re-sorts the vector floating-point
instructions to make them more easily extensible, and adds a missing
pseudo instruction.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307154 91177308-0d34-0410-b5e6-96231b3b80d8
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306876 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306821 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304203 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304202 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302667 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302665 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the set of character-set translate and convert instructions
for assembler / disassembler use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302644 91177308-0d34-0410-b5e6-96231b3b80d8
Vector immediate load instructions should have the isAsCheapAsAMove, isMoveImm
and isReMaterializable flags set. With them, these instruction will get
hoisted out of loops.
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292790 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288526 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288525 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288031 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288029 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288028 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286587 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286586 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286585 91177308-0d34-0410-b5e6-96231b3b80d8
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286285 91177308-0d34-0410-b5e6-96231b3b80d8
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286284 91177308-0d34-0410-b5e6-96231b3b80d8
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286283 91177308-0d34-0410-b5e6-96231b3b80d8
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286263 91177308-0d34-0410-b5e6-96231b3b80d8
* Use a generic vector unit to model the issue unit more accurately.
* Update some vector instructions that actually use the vector unit for more
than one cycle.
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286112 91177308-0d34-0410-b5e6-96231b3b80d8
IssueWidth updated to reflect the capacity of the issue unit correctly.
Correct number of FX and LS units modelled (2, was 1).
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286109 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements two changes:
- Move processor feature definition into a new file SystemZFeatures.td,
and provide explicit lists of supported and unsupported features for
each level of the z/Architecture. This allows specifying unsupported
features in the scheduler definition files for each processor.
- Add optional aliases for the -mcpu processor names according to the
level of the z/Architecture, for compatibility with other compilers
on the platform. The supported aliases are:
-mcpu=arch8 equals -mcpu=z10
-mcpu=arch9 equals -mcpu=z196
-mcpu=arch10 equals -mcpu=zEC12
-mcpu=arch11 equals -mcpu=z13
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285577 91177308-0d34-0410-b5e6-96231b3b80d8
Post-RA sched strategy and scheduling instruction annotations for z196, zEC12
and z13.
This scheduler optimizes decoder grouping and balances processor resources
(including side steering the FPd unit instructions).
The SystemZHazardRecognizer keeps track of the scheduling state, which can
be dumped with -debug-only=misched.
Reviers: Ulrich Weigand, Andrew Trick.
https://reviews.llvm.org/D17260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284704 91177308-0d34-0410-b5e6-96231b3b80d8
Jonas Paulsson