to create a JIT. This lets you specify JIT-specific configuration items
like the JITMemoryManager to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44647 91177308-0d34-0410-b5e6-96231b3b80d8
This allows an important optimization to be re-enabled.
- If all uses / defs of a split interval can be folded, give the interval a
low spill weight so it would not be picked in case spilling is needed (avoid
pushing other intervals in the same BB to be spilled).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44601 91177308-0d34-0410-b5e6-96231b3b80d8
throw exceptions", just mark intrinsics with the nounwind
attribute. Likewise, mark intrinsics as readnone/readonly
and get rid of special aliasing logic (which didn't use
anything more than this anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44544 91177308-0d34-0410-b5e6-96231b3b80d8
into alias analysis. This meant updating the API
which now has versions of the getModRefBehavior,
doesNotAccessMemory and onlyReadsMemory methods
which take a callsite parameter. These should be
used unless the callsite is not known, since in
general they can do a better job than the versions
that take a function. Also, users should no longer
call the version of getModRefBehavior that takes
both a function and a callsite. To reduce the
chance of misuse it is now protected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44487 91177308-0d34-0410-b5e6-96231b3b80d8
attributes. While there, I noticed that not all
attribute methods returned a pointer-to-constant,
so I fixed that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44457 91177308-0d34-0410-b5e6-96231b3b80d8
in the middle of a split basic block, create a new live interval starting at
the def. This avoid artifically extending the live interval over a number of
cycles where it is dead. e.g.
bb1:
= vr1204 (use / kill) <= new interval starts and ends here.
...
...
vr1204 = (new def) <= start a new interval here.
= vr1204 (use)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44436 91177308-0d34-0410-b5e6-96231b3b80d8
the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44359 91177308-0d34-0410-b5e6-96231b3b80d8
trivial difference in function attributes, allow calls to it to
be converted to direct calls. Based on a patch by Török Edwin.
While there, move the various lists of mutually incompatible
parameters etc out of the verifier and into ParameterAttributes.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44315 91177308-0d34-0410-b5e6-96231b3b80d8
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44300 91177308-0d34-0410-b5e6-96231b3b80d8
http://llvm.org/viewvc/llvm-project?rev=44199&view=rev
This patch completely broke serialization due to an invariant I assumed but
did not hold. The assumed invariant was that all pointer IDs emitted by a call
to BatchEmitOwnedPtrs would be consecutive. This is only the case if there has
been no forward references to an owned pointer (and hence already registered
with the Serializer object).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44203 91177308-0d34-0410-b5e6-96231b3b80d8
Deserialize::ReadDiffPtrID to read and emit bools instead of unsigned
integers. This should result in a nice space optimization once we have
"auto-abbreviation" generation in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44200 91177308-0d34-0410-b5e6-96231b3b80d8
SerializedPtrID, followed by the *differences* in IDs. The big idea is that
most IDs will be just be 1 off from the previous (either that or NULL, which
we encode as a difference if 0), so this will greatly reduce the encoding
space for extra IDs to just 1 bit per pointer.
So far this optimization reduces serialization of Carbon.h by only 1%, but
we aren't using any abbreviations now in the Bitcode file to properly take
advantage of this optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44199 91177308-0d34-0410-b5e6-96231b3b80d8
When a live interval is being spilled, rather than creating short, non-spillable
intervals for every def / use, split the interval at BB boundaries. That is, for
every BB where the live interval is defined or used, create a new interval that
covers all the defs and uses in the BB.
This is designed to eliminate one common problem: multiple reloads of the same
value in a single basic block. Note, it does *not* decrease the number of spills
since no copies are inserted so the split intervals are *connected* through
spill and reloads (or rematerialization). The newly created intervals can be
spilled again, in that case, since it does not span multiple basic blocks, it's
spilled in the usual manner. However, it can reuse the same stack slot as the
previously split interval.
This is currently controlled by -split-intervals-at-bb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44198 91177308-0d34-0410-b5e6-96231b3b80d8
is disabled in the sense that it will refuse to create one from a UDiv
instruction, until the code is better tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44163 91177308-0d34-0410-b5e6-96231b3b80d8
deserialize objects if BatchReadOwnedPtrs was called more than once in the
same call chain then the second call would overwrite the SerializedPtrIDs
being used by the first call. Solved this problem by making the vector that
holds the pointer IDs local to a function call. Now BatchReadOwnedPtrs is
reentrant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44152 91177308-0d34-0410-b5e6-96231b3b80d8
MachineOperand auxInfo. Previous clunky implementation uses an external map
to track sub-register uses. That works because register allocator uses
a new virtual register for each spilled use. With interval splitting (coming
soon), we may have multiple uses of the same register some of which are
of using different sub-registers from others. It's too fragile to constantly
update the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44104 91177308-0d34-0410-b5e6-96231b3b80d8
to use different mappings for EH and debug info;
no functional change yet.
Fix warning in X86CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44056 91177308-0d34-0410-b5e6-96231b3b80d8
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44037 91177308-0d34-0410-b5e6-96231b3b80d8
clients of the Deserializer to read the pointer ID before they are ready
to deserialize the object (which can mean registering a pointer reference
with the backpatcher).
Changed some methods that took an argument "SerializedPtrID" to "const SerializedPtrID&" (pass-by-reference). This is to accommodate a future
revision of SerializedPtrID where it may be much fatter than an unsigned
integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44021 91177308-0d34-0410-b5e6-96231b3b80d8
deserialization as a temporary location for storing serialized pointer identifiers. The
definition of SerializedPtrID will likely change significantly in the future, and the
current implementation caused compilation errors on some 64-bit machines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43983 91177308-0d34-0410-b5e6-96231b3b80d8
serialized block in the bitstream, including a block in an entirely different
nesting than the current block. This is useful for deserializing objects from
a bitstream in an order different from the order that they were serialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43973 91177308-0d34-0410-b5e6-96231b3b80d8
Moved some of the logic in BitstreamReader::ExitBlock into a utility function
BitstreamReader::PopBlockScope. The latter is a private method. It will also
be called by Deserializer to manipulate the current "block scope."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43972 91177308-0d34-0410-b5e6-96231b3b80d8
apints on big-endian machines if the bitwidth is
not a multiple of 8. Introduce a new helper,
MVT::getStoreSizeInBits, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43934 91177308-0d34-0410-b5e6-96231b3b80d8
block that is being visited in the bitstream. The client can also now
skip blocks before reading them, and query the current abbreviation number
as seen from the perspective of the Deserializer. This allows the client
to be more interactive in the deserialization process (if they so choose).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43916 91177308-0d34-0410-b5e6-96231b3b80d8
instead of just using "unsigned". This gives us more flexibility in changing
the definition of the handle later, and is more self-documenting.
Added tracking of block stack in the Deserializer. Now clients can query
if they are still within a block using the methods GetCurrentBlockLocation()
and FinishedBlock().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43903 91177308-0d34-0410-b5e6-96231b3b80d8
