D64033 <https://reviews.llvm.org/D64033> added DW_AT_call_column for
inline sites. However, that change wasn't aware of "-gno-column-info".
To avoid adding column info when "-gno-column-info" is used, now
DW_AT_call_column is only added when we have non-zero column (when
"-gno-column-info" is used, column will be zero).
Patch by Wenlei He!
Differential Revision: https://reviews.llvm.org/D64784
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@366264 91177308-0d34-0410-b5e6-96231b3b80d8
The column field is missing for all inline sites, currently it's always
zero. This changes populates DW_AT_call_column field for inline sites.
Test case modified to cover this change.
Patch by: Wenlei He
Differential revision: https://reviews.llvm.org/D64033
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365945 91177308-0d34-0410-b5e6-96231b3b80d8
A build failure was found on the SystemZ platform.
This reverts commit 9e7e73578e54cd22b3c7af4b54274d743b6607cc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365886 91177308-0d34-0410-b5e6-96231b3b80d8
In addition, fix the build failure for the 'unused'
variable. The variable was used inside the 'LLVM_DEBUG()'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365469 91177308-0d34-0410-b5e6-96231b3b80d8
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365467 91177308-0d34-0410-b5e6-96231b3b80d8
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365444 91177308-0d34-0410-b5e6-96231b3b80d8
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363635 91177308-0d34-0410-b5e6-96231b3b80d8
Variable's stack location can stretch longer than it should. If a
variable is placed at the stack in a some nested basic block its range
can be calculated to be up to the next occurrence of the variable's
DBG_VALUE, or up to the end of the function, thus covering a basic
blocks that should not be included in the variable’s location range.
This happens because the DbgEntityHistoryCalculator ends register
locations at the end of a basic block only if the variable’s location
register has been changed throughout the function, which is not the
case for the register used to reference stack objects.
This patch also tries to produce a single value location if the location
list builder managed to merge all the locations into one.
Reviewers: aprantl, dstenb, jmorse
Reviewed By: aprantl, dstenb, jmorse
Subscribers: djtodoro, ivanbaev, asowda
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D61600
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362923 91177308-0d34-0410-b5e6-96231b3b80d8
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360108 91177308-0d34-0410-b5e6-96231b3b80d8
While this doesn't come up in reasonable cases currently (the only user
defined types not in type units are ones without linkage - which makes
for near-ODR violations, because it'd be a type with linkage referencing
a type without linkage - such a type can't be validly defined in more
than one TU, so arguably it shouldn't be in a type unit to begin with -
but it's a convenient way to demonstrate an issue that will become more
revalent with homed modular debug info type definitions - which also
don't need to be in type units but more legitimately so).
Precursor to the Clang change to de-type-unit (by omitting the
'identifier') types homed due to strong linkage vtables. (making that
change without this one would lead to major type duplication in type
units)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359122 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r358931
Reverted in r358997
Seems this change made Apple accelerator tables miss names (because
names started respecting the CU NameTableKind GNU & assuming that
shouldn't produce accelerated names too), which is never correct (apple
accelerator tables don't have separators or CU lists - if present, they
must describe all names in all CUs).
Original Description:
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359026 91177308-0d34-0410-b5e6-96231b3b80d8
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358931 91177308-0d34-0410-b5e6-96231b3b80d8
COMMON blocks are a feature of Fortran that has no direct analog in C languages, but they are similar to data sections in assembly language programming. A COMMON block is a named area of memory that holds a collection of variables. Fortran subprograms may map the COMMON block memory area to their own, possibly distinct, non-empty list of variables. A Fortran COMMON block might look like the following example.
COMMON /ALPHA/ I, J
For this construct, the compiler generates a new scope-like DI construct (!DICommonBlock) into which variables (see I, J above) can be placed. As the common block implies a range of storage with global lifetime, the !DICommonBlock refers to a !DIGlobalVariable. The Fortran variable that comprise the COMMON block are also linked via metadata to offsets within the global variable that stands for the entire common block.
@alpha_ = common global %alphabytes_ zeroinitializer, align 64, !dbg !27, !dbg !30, !dbg !33!14 = distinct !DISubprogram(…)
!20 = distinct !DICommonBlock(scope: !14, declaration: !25, name: "alpha")
!25 = distinct !DIGlobalVariable(scope: !20, name: "common alpha", type: !24)
!27 = !DIGlobalVariableExpression(var: !25, expr: !DIExpression())
!29 = distinct !DIGlobalVariable(scope: !20, name: "i", file: !3, type: !28)
!30 = !DIGlobalVariableExpression(var: !29, expr: !DIExpression())
!31 = distinct !DIGlobalVariable(scope: !20, name: "j", file: !3, type: !28)
!32 = !DIExpression(DW_OP_plus_uconst, 4)
!33 = !DIGlobalVariableExpression(var: !31, expr: !32)
The DWARF generated for this is as follows.
DW_TAG_common_block:
DW_AT_name: alpha
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: common alpha
DW_AT_type: array of 8 bytes
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: i
DW_AT_type: integer*4
DW_AT_location: @Alpha+0
DW_TAG_variable:
DW_AT_name: j
DW_AT_type: integer*4
DW_AT_location: @Alpha+4
Patch by Eric Schweitz!
Differential Revision: https://reviews.llvm.org/D54327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357934 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356451 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356442 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
According to
https://docs.nvidia.com/cuda/archive/10.0/ptx-writers-guide-to-interoperability/index.html#cuda-specific-dwarf,
the compiler should emit the DW_AT_address_class attribute for all
variable and parameter. It means, that DW_AT_address_class attribute
should be used in the non-standard way to support compatibility with the
cuda-gdb debugger.
Clang is able to generate the information about the variable address
class. This information is emitted as the expression sequence
`DW_OP_constu <DWARF Address Space> DW_OP_swap DW_OP_xderef`. The patch
tries to find all such expressions and transform them into
`DW_AT_address_class <DWARF Address Space>` if target is NVPTX and the debugger is gdb.
If the expression is not found, then default values are used. For the
local variables <DWARF Address Space> is set to ADDR_local_space(6), for
the globals <DWARF Address Space> is set to ADDR_global_space(5). The
values are taken from the table in the same section 5.2. CUDA-Specific
DWARF Definitions.
Reviewers: echristo, probinson
Subscribers: jholewinski, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D57157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353203 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out knowing more than just the base address might be useful -
specifically a future change to respect a DICompileUnit flag for the use
of base address specifiers in DWARF < 5.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346380 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the offsets larger (since they are further from the base
address) but those are in the .dwo - and allows removing addresses and
relocations from the .o file.
This could be built into the AddressPool more fundamentally, perhaps -
when you ask for an AddressPool entry you could say "or give me some
other entry and an offset I need to use" - though what to do about
situations where the first use of an address in a section is not the
earliest address in that section... is tricky.
At least with range addresses we can be fairly sure we've seen the
earliest address first because we see the start address for the
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345224 91177308-0d34-0410-b5e6-96231b3b80d8
Logs provided by @stella.stamenova indicate that on Linux, lldb adds a
spurious slide offset to the return PC it loads from AT_call_return_pc
attributes (see the list thread: "[PATCH] D50478: Add support for
artificial tail call frames").
This patch side-steps the issue by getting rid of the load address
calculation in lldb's CallEdge::GetReturnPCAddress.
The idea is to have the DWARF writer emit function-local offsets to the
instruction after a call. I.e. return-pc = label-after-call-insn -
function-entry. LLDB can simply add this offset to the base address of a
function to get the return PC.
Differential Revision: https://reviews.llvm.org/D53469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344960 91177308-0d34-0410-b5e6-96231b3b80d8
Putting addresses in the address pool, even with non-fission, can reduce
relocations - reusing the addresses from debug_info and debug_rnglists
(the latter coming soon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344834 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF v5 introduces DW_AT_call_all_calls, a subprogram attribute which
indicates that all calls (both regular and tail) within the subprogram
have call site entries. The information within these call site entries
can be used by a debugger to populate backtraces with synthetic tail
call frames.
Tail calling frames go missing in backtraces because the frame of the
caller is reused by the callee. Call site entries allow a debugger to
reconstruct a sequence of (tail) calls which led from one function to
another. This improves backtrace quality. There are limitations: tail
recursion isn't handled, variables within synthetic frames may not
survive to be inspected, etc. This approach is not novel, see:
https://gcc.gnu.org/wiki/summit2010?action=AttachFile&do=get&target=jelinek.pdf
This patch adds an IR-level flag (DIFlagAllCallsDescribed) which lowers
to DW_AT_call_all_calls. It adds the minimal amount of DWARF generation
support needed to emit standards-compliant call site entries. For easier
deployment, when the debugger tuning is LLDB, the DWARF requirement is
adjusted to v4.
Testing: Apart from check-{llvm, clang}, I built a stage2 RelWithDebInfo
clang binary. Its dSYM passed verification and grew by 1.4% compared to
the baseline. 151,879 call site entries were added.
rdar://42001377
Differential Revision: https://reviews.llvm.org/D49887
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343883 91177308-0d34-0410-b5e6-96231b3b80d8
In some senario, LLVM will remove llvm.dbg.labels in IR. For example,
when the labels are in unreachable blocks, these labels will not
be generated in LLVM IR. In the case, these debug labels will have
address zero as their address. It is not legal address for debugger to
set breakpoints or query sources. So, the patch inhibits the address info
(DW_AT_low_pc) of removed labels.
Fix build failed in BuildBot, clang-stage1-cmake-RA-incremental, on macOS.
Differential Revision: https://reviews.llvm.org/D51908
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343062 91177308-0d34-0410-b5e6-96231b3b80d8
In some senario, LLVM will remove llvm.dbg.labels in IR. For example,
when the labels are in unreachable blocks, these labels will not
be generated in LLVM IR. In the case, these debug labels will have
address zero as their address. It is not legal address for debugger to
set breakpoints or query sources. So, the patch inhibits the address info
(DW_AT_low_pc) of removed labels.
Differential Revision: https://reviews.llvm.org/D51908
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342943 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes addBlockByrefAddress(), it is dead code as far as
clang is concerned: Every byref block capture is emitted with a
complex expression that is equivalent to what this function does.
rdar://problem/31629055
Differential Revision: https://reviews.llvm.org/D51763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341737 91177308-0d34-0410-b5e6-96231b3b80d8
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340039 91177308-0d34-0410-b5e6-96231b3b80d8
Now that Clang disables NVPTX pubnames via metadata there's no need for
this fallback to target detection in the backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339970 91177308-0d34-0410-b5e6-96231b3b80d8
In cases where the debugger load time is a worthwhile tradeoff (or less
costly - such as loading from a DWP instead of a variety of DWOs
(possibly over a high-latency/distributed filesystem)) against object
file size, it can be reasonable to disable pubnames and corresponding
gdb-index creation in the linker.
A backend-flag version of this was implemented for NVPTX in
D44385/r327994 - which was fine for NVPTX which wouldn't mix-and-match
CUs. Now that it's going to be a user-facing option (likely powered by
"-gno-pubnames", the same as GCC) it should be encoded in the
DICompileUnit so it can vary per-CU.
After this, likely the NVPTX support should be migrated to the metadata
& the previous flag implementation should be removed.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D50213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339939 91177308-0d34-0410-b5e6-96231b3b80d8
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339676 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 ELF ABI does not define a static relocation type for TLS offset within
a module, which makes it impossible for compiler to generate a valid
DW_AT_location content for thread local variables. Currently LLVM generates an
invalid R_AARCH64_ABS64 relocation at the DW_AT_location field for a TLS
variable. That causes trouble for linker because thread local variable does
not have an absolute address at link time. AArch64 GCC solves the problem by
not generating DW_AT_location for thread local variables. We should do the
same in LLVM.
Differential Revision: https://reviews.llvm.org/D43860
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338655 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added an option that allows to emit only '.loc' and '.file' kind debug
directives, but disables emission of the DWARF sections. Required for
NVPTX target to support profiling. It requires '.loc' and '.file'
directives, but does not require any DWARF sections for the profiler.
Reviewers: probinson, echristo, dblaikie
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338616 91177308-0d34-0410-b5e6-96231b3b80d8
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338390 91177308-0d34-0410-b5e6-96231b3b80d8
The test failure was caused by the compiler not emitting a __debug_ranges section with DWARF 4 and
earlier when no ranges are needed. The test checks for the existence regardless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338081 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338039 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For NVPTX target the value of `DW_AT_frame_base` attribute must be set
to `DW_OP_call_frame_cfa`.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45785
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338036 91177308-0d34-0410-b5e6-96231b3b80d8
This commit caused a regression in the debuginfo-tests:
FAIL: debuginfo-tests :: apple-accel.cpp (40748 of 46595)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337997 91177308-0d34-0410-b5e6-96231b3b80d8
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
Differential Revision: https://reviews.llvm.org/D45556
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337799 91177308-0d34-0410-b5e6-96231b3b80d8
