The existing code turned out to be completely correct when auditted. Thus, only minor code changes and adding a couple of tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267215 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We can fold compares to false when two distinct allocations within a
function are compared for equality.
Patch by Anna Thomas!
Reviewers: majnemer, reames, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267214 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the type canonicalization logic to work for unordered atomic loads and stores. Note that while this change itself is fairly simple and low risk, there's a reasonable chance this will expose problems in the backends by suddenly generating IR they wouldn't have seen before. Anything of this nature will be an existing bug in the backend (you could write an atomic float load), but this will definitely change the frequency with which such cases are encountered. If you see problems, feel free to revert this change, but please make sure you collect a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267210 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This change will shorten memset if the beginning of memset is overwritten by later stores.
Reviewers: hfinkel, eeckstein, dberlin, mcrosier
Subscribers: mgrang, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267197 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a very basic test, since apparently there aren't any tests
for DCE whatsoever to add the new pass version to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267196 91177308-0d34-0410-b5e6-96231b3b80d8
E.g. for:
!1 = {"llvm.distribute", i32 1}
it now returns the MDOperand for 1.
I will use this in LoopDistribution to check the value of the metadata.
Note that the change is backward-compatible with its current use in
LoopVersioningLICM. An Optional implicitly converts to a bool depending
whether it contains a value or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267190 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CachingMemorySSAWalker::invalidateInfo was using IsCall to determine
which cache map needed to be cleared of entries referring to the invalidated
MemoryAccess, but there could also be entries referring to it in the
other cache map (value entries, not key entries). This change just
clears both tables to be conservatively correct.
Also add a verifyRemoved() function, called when expensive
checks (i.e. XDEBUG) are enabled to verify that the invalidated
MemoryAccess object is not referenced in any of the caches.
Reviewers: dberlin, george.burgess.iv
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19388
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267157 91177308-0d34-0410-b5e6-96231b3b80d8
We take the intersection of overflow flags while CSE'ing.
This permits us to consider two instructions with different overflow
behavior to be replaceable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267153 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When optimizing PHIs which have inputs floating point binary
operators, we preserve all IR flags except the fast math
flags.
This change removes the logic which tracked some of the IR flags
(no wrap, exact) and replaces it by doing an and on the IR flags of
all inputs to the PHI - which will also handle the fast math
flags.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19370
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267139 91177308-0d34-0410-b5e6-96231b3b80d8
We assumed that flags were only present on binary operators. This is
not true, they may also be present on calls and fcmps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267113 91177308-0d34-0410-b5e6-96231b3b80d8
EarlyCSE had inconsistent behavior with regards to flag'd instructions:
- In some cases, it would pessimize if the available instruction had
different flags by not performing CSE.
- In other cases, it would miscompile if it replaced an instruction
which had no flags with an instruction which has flags.
Fix this by being more consistent with our flag handling by utilizing
andIRFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267111 91177308-0d34-0410-b5e6-96231b3b80d8
Re-layer the functions in the new (i.e., newly correct) post-order
traversals in ValueEnumerator (r266947) and ValueMapper (r266949).
Instead of adding a node to the worklist in a helper function and
returning a flag to say what happened, return the node itself. This
makes the code way cleaner: the worklist is local to the main function,
there is no flag for an early loop exit (since we can cleanly bury the
loop), and it's perfectly clear when pointers into the worklist might be
invalidated.
I'm fixing both algorithms in the same commit to avoid repeating the
commit message; if you take the time to understand one the other should
be easy. The diff itself isn't entirely obvious since the traversals
have some noise (i.e., things to do), but here's the high-level change:
auto helper = [&WL](T *Op) { auto helper = [](T **&I, T **E) {
=> while (I != E) {
if (shouldVisit(Op)) { T *Op = *I++;
WL.push(Op, Op->begin()); if (shouldVisit(Op)) {
return true; return Op;
} }
return false; return nullptr;
}; };
=>
WL.push(S, S->begin()); WL.push(S, S->begin());
while (!empty()) { while (!empty()) {
auto *N = WL.top().N; auto *N = WL.top().N;
auto *&I = WL.top().I; auto *&I = WL.top().I;
bool DidChange = false;
while (I != N->end())
if (helper(*I++)) { => if (T *Op = helper(I, N->end()) {
DidChange = true; WL.push(Op, Op->begin());
break; continue;
} }
if (DidChange)
continue;
POT.push(WL.pop()); => POT.push(WL.pop());
} }
Thanks to Mehdi for helping me find a better way to layer this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds an instrumentation pass for the new EfficiencySanitizer ("esan")
performance tuning family of tools. Multiple tools will be supported
within the same framework. Preliminary support for a cache fragmentation
tool is included here.
The shared instrumentation includes:
+ Turn mem{set,cpy,move} instrinsics into library calls.
+ Slowpath instrumentation of loads and stores via callouts to
the runtime library.
+ Fastpath instrumentation will be per-tool.
+ Which memory accesses to ignore will be per-tool.
Reviewers: eugenis, vitalybuka, aizatsky, filcab
Subscribers: filcab, vkalintiris, pcc, silvas, llvm-commits, zhaoqin, kcc
Differential Revision: http://reviews.llvm.org/D19167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267058 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we know that the pointer allocated within a function does not escape,
we can fold away comparisons that are done with global pointers
Patch by Anna Thomas!
Reviewers: reames, majnemer, sanjoy
Subscribers: mgrang, mcrosier, majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D19276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267035 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267022 91177308-0d34-0410-b5e6-96231b3b80d8
"Into" was misleading. I am also planning to use this helper to look
for loop metadata and return the argument, so find seems like a better
name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267013 91177308-0d34-0410-b5e6-96231b3b80d8
This builds on 266999 which made FindAvailableValue do the right thing. Tests included show the newly enabled transforms and those which disabled either due to conservatism or correctness requirements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267006 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
`llvm.guard(false)` always bails out of the current compilation unit, so
we can prune any control flow following it.
Reviewers: hfinkel, pcc, reames
Subscribers: majnemer, reames, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266955 91177308-0d34-0410-b5e6-96231b3b80d8
The iteratitive algorithm from r265456 claimed but failed to create a
post-order traversal. It had the same error that was fixed in the
ValueEnumerator in r266947: now, instead of pushing all operands on the
worklist at once, we pause whenever an operand gets pushed in order to
go depth-first (I know, it sounds obvious).
Sadly, I have no idea how to observe this from outside the algorithm and
so I haven't written a test. The output should be the same; it should
just use fewer temporary nodes now. I've added some comments that I
hope make the current logic clear enough it's unlikely to regress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266949 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The function importer already decided what symbols need to be pulled
in. Also these magically added ones will not be in the export list
for the source module, which can confuse the internalizer for
instance.
Reviewers: tejohnson, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19096
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266948 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch refined the instruction weight anootation algorithm:
1. Do not use dbg_value intrinsics for annotation.
2. Annotate cold calls if the call is inlined in profile, but not inlined before preparation. This indicates that the annotation preparation step found no sample for the inlined callsite, thus the call should be very cold.
Reviewers: dnovillo, davidxl
Subscribers: mgrang, llvm-commits
Differential Revision: http://reviews.llvm.org/D19286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266936 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch prevents importing from (and therefore exporting from) any
module with a "llvm.used" local value. Local values need to be promoted
and renamed when importing, and their presense on the llvm.used variable
indicates that there are opaque uses that won't see the rename. One such
example is a use in inline assembly.
See also the discussion at:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098047.html
As part of this, move collectUsedGlobalVariables out of Transforms/Utils
and into IR/Module so that it can be used more widely. There are several
other places in LLVM that used copies of this code that can be cleaned
up as a follow on NFC patch.
Reviewers: joker.eph
Subscribers: pcc, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266877 91177308-0d34-0410-b5e6-96231b3b80d8
This linkage is *not* intended to express that a declaration refers
to a weak symbol, but that the symbol might not be present at link
time. I don't believe it was the intent.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266856 91177308-0d34-0410-b5e6-96231b3b80d8
The functionality contained within getIntrinsicIDForCall is two-fold: it
checks if a CallInst's callee is a vectorizable intrinsic. If it isn't
an intrinsic, it attempts to map the call's target to a suitable
intrinsic.
Move the mapping functionality into getIntrinsicForCallSite and rename
getIntrinsicIDForCall to getVectorIntrinsicIDForCall while
reimplementing it in terms of getIntrinsicForCallSite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266801 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Need to use predecessors for reverse graph, successors for forward graph.
succ_iterator/pred_iterator are not compatible, this patch is all the work necessary to work around that (which is what everywhere else does). Not sure if there is a better way, so cc'ing some random folks to take a gander :)
Reviewers: dblaikie, qcolombet, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18796
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266718 91177308-0d34-0410-b5e6-96231b3b80d8
