The current logic assumes that any constant global will never be SRA'd. I presume this is because normally constant globals can be pushed into their uses and deleted. However, that sometimes can't happen (which is where you really want SRA, so the elements that can be eliminated, are!).
There seems to be no reason why we can't SRA constants too, so let's do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267393 91177308-0d34-0410-b5e6-96231b3b80d8
If several regions cover the same area of code, we have to restore
the combined value for that area when return from a nested region.
This patch achieves that by combining regions before calling buildSegments.
Differential Revision: http://reviews.llvm.org/D18610
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267390 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This implements a new method of run-time checking the NoWrap
SCEV predicates, which should be easier to optimize and nicer
for targets that don't correctly handle multiplication/addition
of large integer types (like i128).
If the AddRec is {a,+,b} and the backedge taken count is c,
the idea is to check that |b| * c doesn't have unsigned overflow,
and depending on the sign of b, that:
a + |b| * c >= a (b >= 0) or
a - |b| * c <= a (b <= 0)
where the comparisons above are signed or unsigned, depending on
the flag that we're checking.
The advantage of doing this is that we avoid extending to a larger
type and we avoid the multiplication of large types (multiplying
i128 can be expensive).
Reviewers: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D19266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267389 91177308-0d34-0410-b5e6-96231b3b80d8
ADD8TLS, a variant of add instruction used for initial-exec TLS,
currently accepts r0 as a source register. While add itself supports
r0 just fine, linker can relax it to a local-exec sequence, converting
it to addi - which doesn't support r0.
Differential Revision: http://reviews.llvm.org/D19193
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267388 91177308-0d34-0410-b5e6-96231b3b80d8
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
This reaplies r267320 without changes after fixing an issue in the OpenMP IR
generator in clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267370 91177308-0d34-0410-b5e6-96231b3b80d8
This corrects the MI annotations for the stack adjustment following the __chkstk
invocation. We were marking the original SP usage as a Def rather than Kill.
The (new) assigned value is the definition, the original reference is killed.
Adjust the ISelLowering to mark Kills and FrameSetup as well.
This partially resolves PR27480.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267361 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on D19318, if we only demand the first element of a DIVSS/DIVSD intrinsic, then reduce to a FDIV call. This matches the existing FADD/FSUB/FMUL patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267359 91177308-0d34-0410-b5e6-96231b3b80d8
Split from D17490. This patch improves support for determining the demanded vector elements through SSE scalar intrinsics:
1 - demanded vector element support for unary and some extra binary scalar intrinsics (RCP/RSQRT/SQRT/FRCZ and ADD/CMP/DIV/ROUND).
2 - addss/addsd get simplified to a fadd call if we aren't interested in the pass through elements
3 - if we don't need the lowest element of a scalar operation then just use the first argument (the pass through elements) directly
We can add support for propagating demanded elements through any equivalent packed SSE intrinsics in a future patch (these wouldn't use the pass through patterns).
Differential Revision: http://reviews.llvm.org/D19318
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267357 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves support for determining the demanded vector elements through SSE scalar intrinsics:
1 - recognise that we only need the lowest element of the second input for binary scalar operations (and all the elements of the first input)
2 - recognise that the roundss/roundsd intrinsics use the lowest element of the second input and the remaining elements from the first input
Differential Revision: http://reviews.llvm.org/D17490
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267356 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed issue with VPPERM target shuffle mask decoding that was incorrectly masking off the 3-bit permute op with a 2-bit mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267346 91177308-0d34-0410-b5e6-96231b3b80d8
Reused the ability to split constants of a type wider than the shuffle mask to work with masks generated from scalar constants transfered to xmm.
This fixes an issue preventing PSHUFB target shuffle masks decoding rematerialized scalar constants and also exposes the XOP VPPERM bug described in PR27472.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267343 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR22248 on s390x. The previous attempt at this was D19101,
which was before LOAD_STACK_GUARD existed. Compared to the previous
version, this always emits a rather ugly block of 4 instructions, involving
a thread pointer load that can't be shared with other potential users.
However, this is necessary for SSP - spilling the guard value (or thread
pointer used to load it) is counter to the goal, since it could be
overwritten along with the frame it protects.
Differential Revision: http://reviews.llvm.org/D19363
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267340 91177308-0d34-0410-b5e6-96231b3b80d8
Add tests for some missing cases to bitcode upgrade in r267296.
- DICompositeType with an 'elements:' field, which will cause it to be
involved in a cycle after the upgrade.
- A DIDerivedType that references a class in 'extraData:'.
I updated test/Bitcode/dityperefs-3.8.ll with the missing cases and
regenerated test/Bitcode/dityperefs-3.8.ll.bc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267332 91177308-0d34-0410-b5e6-96231b3b80d8
The original patch caused crashes because it could derefence a null pointer
for SelectionDAGTargetInfo for targets that do not define it.
Evaluates fmul+fadd -> fmadd combines and similar code sequences in the
machine combiner. It adds support for float and double similar to the existing
integer implementation. The key features are:
- DAGCombiner checks whether it should combine greedily or let the machine
combiner do the evaluation. This is only supported on ARM64.
- It gives preference to throughput over latency: the heuristic used is
to combine always in loops. The targets decides whether the machine
combiner should optimize for throughput or latency.
- Supports for fmadd, f(n)msub, fmla, fmls patterns
- On by default at O3 ffast-math
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267328 91177308-0d34-0410-b5e6-96231b3b80d8
in a debug-info-bearing function has a debug location attached to it. Failure to
do so causes an "!dbg attachment points at wrong subprogram for function"
assertion failure when the inliner sets up inline scope info.
rdar://problem/25878916
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267320 91177308-0d34-0410-b5e6-96231b3b80d8
Keeping as much as possible internal/private is
known to help the optimizer. Let's try to benefit from
this in ThinLTO.
Note: this is early work, but is enough to build clang (and
all the LLVM tools). I still need to write some lit-tests...
Differential Revision: http://reviews.llvm.org/D19103
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267317 91177308-0d34-0410-b5e6-96231b3b80d8
The option to control the emission of the new relocations
is -relax-relocations (blatantly copied from GNU as).
It can't be enabled by default because it breaks relatively
recent versions of ld.bfd/ld.gold (late 2015).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267307 91177308-0d34-0410-b5e6-96231b3b80d8
It seems we still have some ordering issue in the combined index
emission, but I can't figure out why right now.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267306 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fixup for r267304.
The test was sensitive to the path in a subtle way:
the index in memory is sorted by GUID, which are hashes
that include the source filename for local globals.
Teresa recently added a directive at the IR level, so
we can specify it here to make the test independent of
the path.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267305 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As discussed in D18298, some local globals can't
be renamed/promoted (because they have a section, or because
they are referenced from inline assembly).
To be able to detect naming collision, we need to keep around
the "GUID" using their original name without taking the linkage
into account.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19454
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267304 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We are always importing the initializer for a GlobalVariable.
So if a GlobalVariable is in the export-list, we pull in any
refs as well.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19102
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267303 91177308-0d34-0410-b5e6-96231b3b80d8
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267296 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This removes a couple of flags added to control this behavior, and
simply keeps all value names when save-temps is specified.
Reviewers: rafael
Subscribers: llvm-commits, pcc, davide
Differential Revision: http://reviews.llvm.org/D19384
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267279 91177308-0d34-0410-b5e6-96231b3b80d8
Since forward references for uniqued node operands are expensive (and
those for distinct node operands are cheap due to
DistinctMDOperandPlaceholder), minimize forward references in uniqued
node operands.
Moreover, guarantee that when a cycle is broken by a distinct node, none
of the uniqued nodes have any forward references. In
ValueEnumerator::EnumerateMetadata, enumerate uniqued node subgraphs
first, delaying distinct nodes until all uniqued nodes have been
handled. This guarantees that uniqued nodes only have forward
references when there is a uniquing cycle (since r267276 changed
ValueEnumerator::organizeMetadata to partition distinct nodes in front
of uniqued nodes as a post-pass).
Note that a single uniqued subgraph can hit multiple distinct nodes at
its leaves. Ideally these would themselves be emitted in post-order,
but this commit doesn't attempt that; I think it requires an extra pass
through the edges, which I'm not convinced is worth it (since
DistinctMDOperandPlaceholder makes forward references quite cheap
between distinct nodes).
I've added two testcases:
- test/Bitcode/mdnodes-distinct-in-post-order.ll is just like
test/Bitcode/mdnodes-in-post-order.ll, except with distinct nodes
instead of uniqued ones. This confirms that, in the absence of
uniqued nodes, distinct nodes are still emitted in post-order.
- test/Bitcode/mdnodes-distinct-nodes-break-cycles.ll is the minimal
example where a naive post-order traversal would cause one uniqued
node to forward-reference another. IOW, it's the motivating test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267278 91177308-0d34-0410-b5e6-96231b3b80d8
When an operand of a distinct node hasn't been read yet, the reader can
use a DistinctMDOperandPlaceholder. This is much cheaper than forward
referencing from a uniqued node. Change
ValueEnumerator::organizeMetadata to partition distinct nodes and
uniqued nodes to reduce the overhead of cycles broken by distinct nodes.
Mehdi measured this for me; this removes most of the RAUW from the
importing step of -flto=thin, even after a WIP patch that removes
string-based DITypeRefs (introducing many more cycles to the metadata
graph).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267276 91177308-0d34-0410-b5e6-96231b3b80d8
Before we printed a warning to stderr and left the actual output stream in a
mess. This tries to print a .long or .short representation of what we saw (as
if there was a data-in-code directive).
This isn't guaranteed to restore synchronization in Thumb-mode (if the invalid
instruction was supposed to be 32-bits, we may be off-by-16 for the rest of the
function). But there's no certain way to deal with that, and it's invalid code
anyway (if the data really wasn't an instruction, the user can add proper
.data_in_code directives if they care)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267250 91177308-0d34-0410-b5e6-96231b3b80d8
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267249 91177308-0d34-0410-b5e6-96231b3b80d8
The dwo_name was added to dwo files to improve diagnostics in dwp, but
it confuses tools that attempt to load any dwo named by a dwo_name, even
ones inside dwos. Avoid this by keeping track of whether a unit is
already a dwo unit, and if so, not loading further dwos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267241 91177308-0d34-0410-b5e6-96231b3b80d8
