Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253511 91177308-0d34-0410-b5e6-96231b3b80d8
Several backends have instructions to reverse the order of bits in an integer. Conceptually matching such patterns is similar to @llvm.bswap, and it was mentioned in http://reviews.llvm.org/D14234 that it would be best if these patterns were matched in InstCombine instead of reimplemented in every different target.
This patch introduces an intrinsic @llvm.bitreverse.i* that operates similarly to @llvm.bswap. For plumbing purposes there is also a new ISD node ISD::BITREVERSE, with simple expansion and promotion support.
The intention is that InstCombine's BSWAP detection logic will be extended to support BITREVERSE too, and @llvm.bitreverse intrinsics emitted (if the backend supports lowering it efficiently).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252878 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a pass for doing PowerPC peephole optimizations at the
MI level while the code is still in SSA form. This allows for easy
modifications to the instructions while depending on a subsequent pass
of DCE. Both passes are very fast due to the characteristics of SSA.
At this time, the only peepholes added are for cleaning up various
redundancies involving the XXPERMDI instruction. However, I would
expect this will be a useful place to add more peepholes for
inefficiencies generated during instruction selection. The pass is
placed after VSX swap optimization, as it is best to let that pass
remove unnecessary swaps before performing any remaining clean-ups.
The utility of these clean-ups are demonstrated by changes to four
existing test cases, all of which now have tighter expected code
generation. I've also added Eric Schweiz's bugpoint-reduced test from
PR25157, for which we now generate tight code. One other test started
failing for me, and I've fixed it
(test/Transforms/PlaceSafepoints/finite-loops.ll) as well; this is not
related to my changes, and I'm not sure why it works before and not
after. The problem is that the CHECK-NOT: of "statepoint" from test1
fails because of the "statepoint" in test2, and so forth. Adding a
CHECK-LABEL in between keeps the different occurrences of that string
properly scoped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252651 91177308-0d34-0410-b5e6-96231b3b80d8
Under most circumstances, if SCEV can simplify X-Y to a constant, then it can
also simplify Y-X to a constant. However, there is no guarantee that this is
always true, and concensus is not to consider that a correctness bug in SCEV
(although it is undesirable).
PPCLoopPreIncPrep gathers pointers used to access memory (via loads, stores and
prefetches) into buckets, where in each bucket the relative pointer offsets are
constant. We used to keep each bucket as a multimap, where SCEV's subtraction
operation was used to define the ordering predicate. Instead, use a fixed SCEV
base expression for each bucket, record the constant offsets from that base
expression, and adjust it later, if desirable, once all pointers have been
collected.
Doing it this way should be more compile-time efficient than the previous
scheme (in addition to making the implementation less sensitive to SCEV
simplification quirks).
Fixes PR25170.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252417 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252219 91177308-0d34-0410-b5e6-96231b3b80d8
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. It turns out that the new code path taken due to
legalizing a scalar_to_vector of i64 -> v2i64 exposes a missing check in a
micro optimization to change a load followed by a scalar_to_vector into a
load and splat instruction on PPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251798 91177308-0d34-0410-b5e6-96231b3b80d8
We cannot form ctr-based loops around function calls, including calls to
__tls_get_addr used for PIC TLS variables. References to such TLS variables,
however, might be buried within constant expressions, and so we need to search
the entire constant expression to be sure that no references to such TLS
variables exist.
Fixes PR25256, reported by Eric Schweitz. This is a slightly-modified version
of the patch suggested by Eric in the bug report, and a test case I created.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251582 91177308-0d34-0410-b5e6-96231b3b80d8
As a follow-up to r251566, do the same for the other optionally-supported
register classes (mostly for vector registers). Don't return an unavailable
register class (which would cause an assert later), but fail cleanly when
provided an unsupported inline asm constraint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251575 91177308-0d34-0410-b5e6-96231b3b80d8
When crbits are disabled, cleanly reject the constraint (return the register
class only to cause an assert later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251566 91177308-0d34-0410-b5e6-96231b3b80d8
Add the crbits processor feature so that the test can be run at -O1, etc.
regardless of the default crbits setting.
Fixes PR23778.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251548 91177308-0d34-0410-b5e6-96231b3b80d8
cntlz is the old POWER mnemonic. cntlzw is the PowerPC mnemonic.
This change fixes an issue when -no-integrated-as: The opcode cntlz is
unrecognized by gas
Alias the POWER mnemonic cntlz[.] to the PowerPC mnemonic cntlzw[.]
This is done for because the POWER cntlz mnemonic has be used by LLVM for
a very long time. We need to make sure that assembly programs
that are using the cntlz[.] do not break with this change.
Change PowerPC tests to reflect the insn change from cntlz to cntlzw.
Add assembly test to verify cntlz[.] is encoded correctly.
Patch by Tom Rix!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251489 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Don't call `computeKnownBitsFromRangeMetadata` for extended loads --
this can cause a mismatch between the width of the !range metadata and
the width of the APInt's accumulating `KnownZero` (and `KnownOne` in the
future). This isn't a problem now, but will be after a future change.
Note: this can be made more aggressive in the future.
Reviewers: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14107
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251486 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250370 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250349 91177308-0d34-0410-b5e6-96231b3b80d8
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250342 91177308-0d34-0410-b5e6-96231b3b80d8
PR25157 identifies a bug where a load plus a vector shuffle is
incorrectly converted into an LXVDSX instruction. That optimization
is only valid if the load is of a doubleword, and in the noted case,
it was not. This corrects that problem.
Joint patch with Eric Schweitz, who provided the bugpoint-reduced test
case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250324 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corresponds to review:
http://reviews.llvm.org/D12032
This patch builds onto the patch that provided scalar to vector conversions
without stack operations (D11471).
Included in this patch:
- Vector element extraction for all vector types with constant element number
- Vector element extraction for v16i8 and v8i16 with variable element number
- Removal of some unnecessary COPY_TO_REGCLASS operations that ended up
unnecessarily moving things around between registers
Not included in this patch (will be in upcoming patch):
- Vector element extraction for v4i32, v4f32, v2i64 and v2f64 with
variable element number
- Vector element insertion for variable/constant element number
Testing is provided for all extractions. The extractions that are not
implemented yet are just placeholders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249822 91177308-0d34-0410-b5e6-96231b3b80d8
Shrink wrapping is causing a self-hosting failure on PPC64/Linux. Disable for
now until the problem can be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248924 91177308-0d34-0410-b5e6-96231b3b80d8
When AA is being used, non-aliasing stores are canonicalized to use the same
chain, and DAGCombiner::getStoreMergeAndAliasCandidates can take advantage of
this by looking only as users of a store's chain operand. However, user
iteration is not result-number specific, we need to check that the use is as a
chain operand, and not via some other operand. It is certainly possible to have
another potentially-aliasing store, which shares the first's base pointer, and
uses the first's chain's node via some other operand.
Failure to catch this situation caused, at least in the included test case, an
assert later because the relative sequence-number ordering caused later
replacement to create a cycle in the DAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248698 91177308-0d34-0410-b5e6-96231b3b80d8
The algorithm would not modify the live-in list of blocks below the save
block point which is correct unless it happens to be a restore point at
the same time.
Also fixes the benign issue of live-in registers being added twice in
some cases.
The testcase is based on a test submitted by Kit Barton.
Differential Revision: http://reviews.llvm.org/D13176
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248620 91177308-0d34-0410-b5e6-96231b3b80d8
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248169 91177308-0d34-0410-b5e6-96231b3b80d8
- Strenghten the logic to be sure we hoist the restore point out of the current
loop. (The fixes a bug with infinite loop, added as part of the patch.)
- Walk over the exit blocks of the current loop to conver to the desired restore
point in one iteration of the update loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247958 91177308-0d34-0410-b5e6-96231b3b80d8
When building LLVM as a (potentially dynamic) library that can be linked against
by multiple compilers, the default triple is not really meaningful.
We allow to explicitely set it to an empty string when configuring LLVM.
In this case, said "target independent" tests in the test suite that are using
the default triple are disabled by matching the newly available feature
"default_triple".
Reviewers: probinson, echristo
Differential Revision: http://reviews.llvm.org/D12660
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247775 91177308-0d34-0410-b5e6-96231b3b80d8
The changes in this patch are as follows:
1. Modify the emitPrologue and emitEpilogue methods to work properly when the prologue and epilogue blocks are not the first/last blocks in the function
2. Fix a bug in PPCEarlyReturn optimization caused by an empty entry block in the function
3. Override the runShrinkWrap PredicateFtor (defined in TargetMachine) to check whether shrink wrapping should run:
Shrink wrapping will run on PPC64 (Little Endian and Big Endian) unless -enable-shrink-wrap=false is specified on command line
A new test case, ppc-shrink-wrapping.ll was created based on the existing shrink wrapping tests for x86, arm, and arm64.
Phabricator review: http://reviews.llvm.org/D11817
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247237 91177308-0d34-0410-b5e6-96231b3b80d8
To commute a trivial rlwimi instructions (meaning one with a full mask and zero
shift), we'd need to ability to form an all-zero mask (instead of an all-one
mask) using rlwimi. We can't represent this, however, and we'll miscompile code
if we try.
The code quality problem that this highlights (that SDAG simplification can
lead to us generating an ISD::OR node with a constant zero LHS) will be fixed
as a follow-up.
Fixes PR24719.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246937 91177308-0d34-0410-b5e6-96231b3b80d8
PPCISelDAGToDAG has a transformation that generates a rlwimi instruction from
an input pattern that looks like this:
and(or(x, c1), c2)
but the associated logic does not work if there are bits that are 1 in c1 but 0
in c2 (these are normally canonicalized away, but that can't happen if the 'or'
has other users. Make sure we abort the transformation if such bits are
discovered.
Fixes PR24704.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246900 91177308-0d34-0410-b5e6-96231b3b80d8
When forming permutation-based unaligned vector loads, we need to know whether
it is valid to read ahead of the requested address by a full vector length.
Doing so is more efficient (and allows for more CSE with later loads), but
could trigger a page fault if invalid. To determine validity, we look for other
loads in the same block that access the relevant address range.
The relevant point here is that we need to do this as part of the process of
forming permutation-based vector loads, and this happens quite early in the
SDAG pipeline - specifically before many of the address calculations are fully
canonicalized. As a result, we need to try harder to recognize base+offset
address computations, because they still might appear as chain of adds
(base+offset+offset, for example). To account for this, we'll look through
chains of adds, accumulating the constant offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246813 91177308-0d34-0410-b5e6-96231b3b80d8
If you compute the MMO offset using unsigned arithmetic, you end up with a
large positive offset instead of a small negative one. In theory, this could
cause bad instruction-scheduling decisions later.
I noticed this by inspection from the debug output, and using that for the
regression test is the best I can do right now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246805 91177308-0d34-0410-b5e6-96231b3b80d8
I'm adding a regression test to better cover code generation for unaligned
vector loads and stores, but there's no functional change to the code
generation here. There is an improvement to the cost model for unaligned vector
loads and stores, mostly for QPX (for which we were not previously accounting
for the permutation-based loads), and the cost model implementation is cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246712 91177308-0d34-0410-b5e6-96231b3b80d8
LowerVECTOR_SHUFFLE needs to decide whether to pass a vector shuffle off to the
TableGen-generated matching code, and it does this by testing the same
predicates used by the TableGen files. Unfortunately, when we added new
P8Altivec-only predicates, we started universally testing them in
LowerVECTOR_SHUFFLE, and if then matched when targeting a system prior to a P8,
we'd end up with a selection failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246675 91177308-0d34-0410-b5e6-96231b3b80d8
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246507 91177308-0d34-0410-b5e6-96231b3b80d8
AggressiveAntiDepBreaker was doing some EarlyClobber checking, but was not
checking that the register being potentially renamed was defined by an
early-clobber def where there was also a use, in that instruction, of the
register being considered as the target of the rename. Fixes PR24014.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246423 91177308-0d34-0410-b5e6-96231b3b80d8
There were really two problems here. The first was that we had the truth tables
for signed i1 comparisons backward. I imagine these are not very common, but if
you have:
setcc i1 x, y, LT
this has the '0 1' and the '1 0' results flipped compared to:
setcc i1 x, y, ULT
because, in the signed case, '1 0' is really '-1 0', and the answer is not the
same as in the unsigned case.
The second problem was that we did not have patterns (at all) for the unsigned
comparisons select_cc nodes for i1 comparison operands. This was the specific
cause of PR24552. These had to be added (and a missing Altivec promotion added
as well) to make sure these function for all types. I've added a bunch more
test cases for these patterns, and there are a few FIXMEs in the test case
regarding code-quality.
Fixes PR24552.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246400 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for MIR serialization of PowerPC-specific operand target flags
(based on the generic infrastructure added in r244185 and r245383).
I won't even pretend that this is good test coverage, but this includes the
regression test associated with r246372. Adding an MIR test for that fix is far
superior to adding an IR-level test because particular instruction-scheduling
decisions are necessary in order to expose the bug, and using an MIR test we
can start the pipeline post-scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246373 91177308-0d34-0410-b5e6-96231b3b80d8
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246327 91177308-0d34-0410-b5e6-96231b3b80d8
When combiner AA is enabled, look at stores on the same chain.
Non-aliasing stores are moved to the same chain so the existing
code fails because it expects to find an adajcent store on a consecutive
chain.
Because of how DAGCombiner tries these store combines,
MergeConsecutiveStores doesn't see the correct set of stores on the chain
when it visits the other stores. Each store individually has its chain
fixed before trying to merge consecutive stores, and then tries to merge
stores from that point before the other stores have been processed to
have their chains fixed. To fix this, attempt to use FindBetterChain
on any possibly neighboring stores in visitSTORE.
Suppose you have 4 32-bit stores that should be merged into 1 vector
store. One store would be visited first, fixing the chain. What happens is
because not all of the store chains have yet been fixed, 2 of the stores
are merged. The other 2 stores later have their chains fixed,
but because the other stores were already merged, they have different
memory types and merging the two different sized stores is not
supported and would be more difficult to handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246307 91177308-0d34-0410-b5e6-96231b3b80d8
We might end up with a trivial copy as the addend, and if so, we should ignore
the corresponding FMA instruction. The trivial copy can be coalesced away later,
so there's nothing to do here. We should not, however, assert. Fixes PR24544.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245907 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes PR24546, which demonstrates a segfault during the VSX
swap removal pass. The problem is that debug value instructions were
not excluded from the list of instructions to be analyzed for webs of
related computation. I've added the test case from the PR as a crash
test in test/CodeGen/PowerPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245862 91177308-0d34-0410-b5e6-96231b3b80d8
When PPCVSXFMAMutate would look at the input addend register, it would get its
input value number. This would fail, however, if the register was undef,
causing a segfault. Don't segfault (just skip such FMA instructions).
Fixes the test case from PR24542 (although that may have been over-reduced).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245741 91177308-0d34-0410-b5e6-96231b3b80d8
XVCMPEQDP is used for VSX v2f64 equality comparisons, but the value type needs
to be v2i64 (as that's the corresponding SETCC type).
Fixes PR24225.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245535 91177308-0d34-0410-b5e6-96231b3b80d8
This DAGCombine was creating custom SDAG nodes with an illegal ppc_fp128
operand type because it was triggering on f64/f32 int2fp(fp2int(ppc_fp128 x)),
but shouldn't (it should only apply to f32/f64 types). The result was a crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245530 91177308-0d34-0410-b5e6-96231b3b80d8
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. I am working on resolving the issue, but in the
meantime, I'm disabling the legalization of scalar_to_vector operation for v2i64
and the associated testing until I can get this fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245481 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corresponds to review:
http://reviews.llvm.org/D11471
It improves the code generated for converting a scalar to a vector value. With
direct moves from GPRs to VSRs, we no longer require expensive stack operations
for this. Subsequent patches will handle the reverse case and more general
operations between vectors and their scalar elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244921 91177308-0d34-0410-b5e6-96231b3b80d8
