This class represents a symbol table built from in-memory IR. It provides
access to GlobalValues and should only be used if such access is required
(e.g. in the LTO implementation). We will eventually change IRObjectFile
to read from a bitcode symbol table rather than using ModuleSymbolTable,
so it would not be able to expose the module.
Differential Revision: https://reviews.llvm.org/D27073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288319 91177308-0d34-0410-b5e6-96231b3b80d8
The assertions were wrong; we need to call getEncodingData() on the element,
not the array. While here, simplify the skipRecord() implementation for Fixed
and Char6 arrays. This is tested by the code I added to llvm-bcanalyzer
which makes sure that we can skip any record.
Differential Revision: https://reviews.llvm.org/D27241
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288315 91177308-0d34-0410-b5e6-96231b3b80d8
If LoopInfo is available during GVN, BasicAA will use it. However
MergeBlockIntoPredecessor does not update LI as it merges blocks.
This didn't use to cause problems because LI was freed before
GVN/BasicAA. Now with OptimizationRemarkEmitter, the lifetime of LI is
extended so LI needs to be kept up-to-date during GVN.
Differential Revision: https://reviews.llvm.org/D27288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288307 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
it's often the case when the rules in the SpecialCaseList
are of the form hel.o*bar. That gives us a chance to build
trigram index to quickly discard 99% of inputs without
running a full regex. A similar idea was used in Google Code Search
as described in the blog post:
https://swtch.com/~rsc/regexp/regexp4.html
The check is defeated, if there's at least one regex
more complicated than that. In this case, all inputs
will go through the regex. That said, the real-world
rules are often simple or can be simplied. That considerably
speeds up compiling Chromium with CFI and UBSan.
As measured on Chromium's content_message_generator.cc:
before, CFI: 44 s
after, CFI: 23 s
after, CFI, no blacklist: 23 s (~1% slower, but 3 runs were unable to show the difference)
after, regular compilation to bitcode: 23 s
Reviewers: pcc
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288303 91177308-0d34-0410-b5e6-96231b3b80d8
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288296 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288293 91177308-0d34-0410-b5e6-96231b3b80d8
VariableDbgInfo is per function data, so it makes sense to have it with
the function instead of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288292 91177308-0d34-0410-b5e6-96231b3b80d8
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.
Differential Revision: https://reviews.llvm.org/D27244
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288290 91177308-0d34-0410-b5e6-96231b3b80d8
Maintain the command line resolutions as a map to a list of resolutions
rather than a single resolution, and apply the resolutions in the order
observed. This is not only simpler but allows us to test the scenario where
the two symbols have different resolutions.
Differential Revision: https://reviews.llvm.org/D27285
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288288 91177308-0d34-0410-b5e6-96231b3b80d8
The LLDB tests are now ready for this patch.
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288283 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When using thin archives, and processing the same archive multiple times, we were mangling existing entries. The root cause is that we were calling computeRelativePath() more than once. Here, we only call it when adding new members to an archive.
Note that D27218 changes the way thin archives are printed, and will break the new unit test included here. Depending on which one lands first, the other will need to be slightly modified.
Reviewers: rafael, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288280 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288279 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves some posix specific file i/o code into a new
file, FuzzerIOPosix.cpp, and provides implementations for these
functions on Windows in FuzzerIOWindows.cpp. This is another
incremental step towards getting libfuzzer working on Windows,
although it still should not be expected to be fully working.
Patch by Marcos Pividori
Differential Revision: https://reviews.llvm.org/D27233
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288275 91177308-0d34-0410-b5e6-96231b3b80d8
This implements PGO-driven loop peeling.
The basic idea is that when the average dynamic trip-count of a loop is known,
based on PGO, to be low, we can expect a performance win by peeling off the
first several iterations of that loop.
Unlike unrolling based on a known trip count, or a trip count multiple, this
doesn't save us the conditional check and branch on each iteration. However,
it does allow us to simplify the straight-line code we get (constant-folding,
etc.). This is important given that we know that we will usually only hit this
code, and not the actual loop.
This is currently disabled by default.
Differential Revision: https://reviews.llvm.org/D25963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288274 91177308-0d34-0410-b5e6-96231b3b80d8
We had a limited version of this for scalar 'and'; this expands
the transform to 'or' and 'xor' and allows vectors types too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288273 91177308-0d34-0410-b5e6-96231b3b80d8
When svn does not know the password and it has to prompt, it needs to query.
However it won't when invoked from the Python script and instead fails with:
svn: E215004: Authentication failed and interactive prompting is disabled; see the --force-interactive option
Differential Revision: https://reviews.llvm.org/D27274
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288266 91177308-0d34-0410-b5e6-96231b3b80d8
In an effort to get libfuzzer working on Windows, we need to make
a distinction between what functions require platform specific
code (e.g. different code on Windows vs Linux) and what code
doesn't. IO functions, for example, tend to be platform
specific.
This patch separates out some of the functions which will need
to have platform specific implementations into different headers,
so that we can then provide different implementations for each
platform.
Aside from that, this patch contains no functional change. It
is purely a re-organization.
Patch by Marcos Pividori
Differential Revision: https://reviews.llvm.org/D27230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288264 91177308-0d34-0410-b5e6-96231b3b80d8
