While legalizing a 64-bit shift left by 1, the following occurs:
We split the shift operand in half: a high half and a low half.
We then create an ADDC with the low half and a ADDE with the high half +
the carry bit from the ADDC.
This is problematic if X is any_ext'd because the high half computation
is now undef + undef + carry bit and there is no way to ensure that the
two undef values had the same bitwise representation. This results in
the lowest bit in the high half turning into garbage.
Instead, do not try to turn shifts into arithmetic during type
legalization.
This fixes PR26350.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259065 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the instruction we're hoisting out of a loop into its preheader is
guaranteed to have executed in the loop, then the metadata associated
with the instruction (e.g. !range or !dereferenceable) is valid in the
preheader. This is because once we're in the preheader, we know we're
eventually going to reach the location the metadata was valid at.
This change makes LICM smarter around this, and helps it recognize cases
like these:
```
do {
int a = *ptr; !range !0
...
} while (i++ < N);
```
to
```
int a = *ptr; !range !0
do {
...
} while (i++ < N);
```
Earlier we'd drop the `!range` metadata after hoisting the load from
`ptr`.
Reviewers: igor-laevsky
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16669
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259053 91177308-0d34-0410-b5e6-96231b3b80d8
Author: milena.vujosevic.janicic
Reviewers: dsanders
FastIsel is not supported for microMIPS, thus it needs to be disabled.
Test micromips-zero-mat-uses.ll is deleted since the tested sequence of instructions is not generated for microMIPS without FastISel.
Differential Revision: http://reviews.llvm.org/D15892
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259039 91177308-0d34-0410-b5e6-96231b3b80d8
Re-commit of r258951 after fixing layering violation.
The related LLVM patch adds a backend diagnostic type for reporting
unsupported features, this adds a printer for them to clang.
In the case where debug location information is not available, I've
changed the printer to report the location as the first line of the
function, rather than the closing brace, as the latter does not give the
user any information. This also affects optimisation remarks.
Differential Revision: http://reviews.llvm.org/D16590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259035 91177308-0d34-0410-b5e6-96231b3b80d8
This patch revamps the RegStackifier pass with a new tree traversal mechanism,
enabling three major new features:
- Stackification of values with multiple uses, using the result value of set_local
- More aggressive stackification of instructions with side effects
- Reordering operands in commutative instructions to enable more stackification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259009 91177308-0d34-0410-b5e6-96231b3b80d8
Change the unnamed label comments like
; <label>:8 ; preds = %1
to
; <label>:8: ; preds = %1
This way lit tests can match [[LABEL]]: in both asserts and no-asserts builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258993 91177308-0d34-0410-b5e6-96231b3b80d8
We already perform it at the beginning of the function so we can't
arrive here with an invalid object. Also, add a test so that bugs
won't sneak in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258982 91177308-0d34-0410-b5e6-96231b3b80d8
Various bits we want to use the new ABI actually compile with "-arch armv7k
-miphoneos-version-min=9.0". Not ideal, but also not ridiculous given how
slices work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258975 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for:
https://llvm.org/bugs/show_bug.cgi?id=26308
With the switch to using the TTI cost model in:
http://reviews.llvm.org/rL228826
...it became possible to hit a zero-cost cycle of instructions (gep -> phi -> gep...),
so we need a cap for the recursion in DominatesMergePoint().
A recursion depth parameter was already added for a different reason in:
http://reviews.llvm.org/rL255660
...so we can just set a limit for it.
I pulled "10" out of the air and made it an independent parameter that we can play with.
It might be higher than it needs to be given the currently low default value of
PHINodeFoldingThreshold (2). That's the starting cost value that we enter the recursion
with, and most instructions have cost set to TCC_Basic (1), so I don't think we're going
to speculate more than 2 instructions with the current parameters.
As noted in the review and the TODO comment, we can do better than just limiting recursion
depth.
Differential Revision: http://reviews.llvm.org/D16637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258971 91177308-0d34-0410-b5e6-96231b3b80d8
ObjC ARC Optimizer.
The main implication of this is:
1. Ensuring that we treat it conservatively in terms of optimization.
2. We put the ASM marker on it so that the runtime can recognize
objc_unsafeClaimAutoreleasedReturnValue from releaseRV.
<rdar://problem/21567064>
Patch by Michael Gottesman!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258970 91177308-0d34-0410-b5e6-96231b3b80d8
The BPF and WebAssembly backends had identical code for emitting errors
for unsupported features, and AMDGPU had very similar code. This merges
them all into one DiagnosticInfo subclass, that can be used by any
backend.
There should be minimal functional changes here, but some AMDGPU tests
have been updated for the new format of errors (it used a slightly
different format to BPF and WebAssembly). The AMDGPU error messages will
now benefit from having precise source locations when debug info is
available.
The implementation of DiagnosticInfoUnsupported::print must be in
lib/Codegen rather than in the existing file in lib/IR/ to avoid
introducing a dependency from IR to CodeGen.
Differential Revision: http://reviews.llvm.org/D16590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258951 91177308-0d34-0410-b5e6-96231b3b80d8
For these basic tests of the intrinsic, make sure the mask can't simplify to movss, blend-with-zero or something else
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258941 91177308-0d34-0410-b5e6-96231b3b80d8
MCJIT emits zero-length CIE at the end of the _eh_frame section. This change
ensures that parser inside DebugInfo will not crash and correctly record such cases.
We are now recording DW_EH_PE_omit as a default value for FDE and LSDA encodings.
Also Offset != EndAugmentationOffset assertion check will only happen if augmentation
string had 'z' letter in it.
Differential Revision: http://reviews.llvm.org/D16588
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258931 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is the second attempt to reapply commit r258404. There was bug in
the initial patch and subsequent fix (mentioned below).
The initial patch caused an assertion because we were computing smaller type
sizes for instructions that cannot be demoted. The fix first determines the
instructions that will be demoted, and then applies the smaller type size to
only those instructions.
This should fix PR26239 and PR26307.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258929 91177308-0d34-0410-b5e6-96231b3b80d8
and "Add a missing test case for r258847."
This reverts commit r258847, r258848. Causes miscompilations and backend
errors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258927 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a revised version of D13974, and the following quoted summary are from D13974
"This patch adds support to check if a loop has loop invariant conditions which lead to loop exits. If so, we know that if the exit path is taken, it is at the first loop iteration. If there is an induction variable used in that exit path whose value has not been updated, it will keep its initial value passing from loop preheader. We can therefore rewrite the exit value with
its initial value. This will help remove phis created by LCSSA and enable other optimizations like loop unswitch."
D13974 was committed but failed one lnt test. The bug was that we only checked the condition from loop exit's incoming block was a loop invariant. But there could be another condition from loop header to that incoming block not being a loop invariant. This would produce miscompiled code.
This patch fixes the issue by checking if the incoming block is loop header, and if not, don't perform the rewrite. The could be further improved by recursively checking all conditions leading to loop exit block, but I'd like to check in this simple version first and improve it with future patches.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16570
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258912 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r258903 which reverted r255660. r258903 was an
accidental commit and should not have been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258905 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG tries to turn complex branch conditions into a switch.
Some of it's logic attempts to reason about bitwise arithmetic produced
by InstCombine. InstCombine can turn things like (X == 2) || (X == 3)
into (X & 1) == 2 and so SimplifyCFG tries to detect when this occurs so
that it can produce a switch instruction.
However, the legality checking was not sufficient to determine whether
or not this had occured. Correctly check this case by requiring that
the right-hand side of the comparison be a power of two.
This fixes PR26323.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258904 91177308-0d34-0410-b5e6-96231b3b80d8
When no device name is specified, default to kaveri
for HSA since SI is not supported and it woud fail.
Default to "tahiti" instead of "SI" since these are
effectively the same, and tahiti is an actual device.
Move default device handling to the TargetMachine
rather than the AMDGPUSubtarget. The module ISA version
is computed from the device name provided with the target
machine, so the attributes printed by the AsmPrinter were
inconsistent with those computed in the subtarget.
Also remove DevName field from subtarget since it's redundant
with getCPU() in the superclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258901 91177308-0d34-0410-b5e6-96231b3b80d8
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258883 91177308-0d34-0410-b5e6-96231b3b80d8
The AMDGPU backend was the last user of the old StringMatcher
recognition code. Move it over to the new lookupLLVMIntrinsicName
funciton, which is now improved to handle all of the interesting edge
cases exposed by AMDGPU intrinsic names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258875 91177308-0d34-0410-b5e6-96231b3b80d8
Enable handling of SM_SentinelZero shuffle elements to getShuffleScalarElt. Improves VZEXT_LOAD matches in EltsFromConsecutiveLoads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258865 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258861 91177308-0d34-0410-b5e6-96231b3b80d8
r258781 optimized memcpy/memmove/memcpy so the intrinsic call can return its first argument, but missed the frame index case. Teach it to ignore that case so C code doesn't assert out in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258851 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, AnalyzeBranch() fails non-equality comparison between floating points
on X86 (see https://llvm.org/bugs/show_bug.cgi?id=23875). This is because this
function can modify the branch by reversing the conditional jump and removing
unconditional jump if there is a proper fall-through. However, in the case of
non-equality comparison between floating points, this can turn the branch
"unanalyzable". Consider the following case:
jne.BB1
jp.BB1
jmp.BB2
.BB1:
...
.BB2:
...
AnalyzeBranch() will reverse "jp .BB1" to "jnp .BB2" and then "jmp .BB2" will be
removed:
jne.BB1
jnp.BB2
.BB1:
...
.BB2:
...
However, AnalyzeBranch() cannot analyze this branch anymore as there are two
conditional jumps with different targets. This may disable some optimizations
like block-placement: in this case the fall-through behavior is enforced even if
the fall-through block is very cold, which is suboptimal.
Actually this optimization is also done in block-placement pass, which means we
can remove this optimization from AnalyzeBranch(). However, currently
X86::COND_NE_OR_P and X86::COND_NP_OR_E are not reversible: there is no defined
negation conditions for them.
In order to reverse them, this patch defines two new CondCode X86::COND_E_AND_NP
and X86::COND_P_AND_NE. It also defines how to synthesize instructions for them.
Here only the second conditional jump is reversed. This is valid as we only need
them to do this "unconditional jump removal" optimization.
Differential Revision: http://reviews.llvm.org/D11393
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258847 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the RedoInsts was processed at the end of the block.
However it was possible that it left behind some instructions that
were not canonicalized.
This should guarantee that any previous instruction in the basic
block is canonicalized before we process a new instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258830 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258826 91177308-0d34-0410-b5e6-96231b3b80d8
