Commit Graph

72 Commits

Author SHA1 Message Date
Eric Christopher
b2bc6e4ad6 Add some fixes to the configure script for isInf and add
--enable-libcpp to projects/sample.

Patch by Dmitri Shubin with additional fixes by me.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153425 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-26 02:09:01 +00:00
Eric Christopher
a443e5b1f1 Remove the C backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153307 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-23 05:50:46 +00:00
Benjamin Kramer
8c3d2580cb configure: Don't require a perl interpreter to be present, LLVM's buildsystem doesn't depend on perl anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152234 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-07 17:07:20 +00:00
Rafael Espindola
9993a3aebb Enable -Wcovered-switch-default again, but add -Werror to the checks to make
sure we don't use it with compilers that don't support it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151665 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-28 23:32:06 +00:00
Chandler Carruth
3c2e5f2140 Temporarily revert r151609, which enabled a new warning for LLVM and
Clang builds. The detection logic for compilers that support the warning
isn't working. Rafael is going to investigate it, but didn't want people
to have to wade through build spam until then.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151649 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-28 19:26:56 +00:00
Rafael Espindola
33177f591a Enable -Wcovered-switch-default as it matches the switch style used in llvm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151609 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-28 02:01:55 +00:00
Rafael Espindola
1aee22e072 Replace the old --with-cxx-* configure options with a single --with-gcc-toolchain
that just uses the new toolchain probing logic. This fixes linking with -m32 on
64 bit systems (the /32 dir was not being added to the search).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149651 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-03 00:59:30 +00:00
Rafael Espindola
48381e5d20 Regenerate configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149391 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-31 17:18:47 +00:00
Sebastian Pop
6e9b5eb51b revert r147542 after comments from Joerg Sonnenberger
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147608 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-05 18:28:46 +00:00
Sebastian Pop
8a86887ba3 use getHostTriple instead of getDefaultTargetTriple in getClosestTargetForJIT
Get back getHostTriple.

For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-04 19:47:22 +00:00
Tony Linthicum
b4b54153ad Hexagon backend support
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146412 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-12 21:14:40 +00:00
Sebastian Pop
de2e0b5e6d rename LLVM_HOSTTRIPLE into LLVM_DEFAULT_TARGET_TRIPLE
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143501 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-01 21:31:44 +00:00
Sebastian Pop
c4cbf4a6a4 derive LLVM_HOSTTRIPLE from target
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143500 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-01 21:30:04 +00:00
Dan Gohman
33ba8b0e96 Remove the Alpha backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143164 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-27 22:56:32 +00:00
Daniel Dunbar
b42d47605b projects/sample: Switch over to imported Makefile setup.
- This will require you to manually reconfigure the projects/sample project (by running projects/config/sample/config.status --recheck) if you haven't updated/built since the 1st part of this commit went in.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143148 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-27 21:25:09 +00:00
Eric Christopher
360fa9a29d Handle newer cases for freebsd which is approaching 10.0 and not 1.0.
Patch by Dimitry Andric!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142995 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-26 00:42:12 +00:00
Dan Gohman
3e6157de57 Remove the Blackfin backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142880 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-25 00:05:42 +00:00
Dan Gohman
29074ccf6c Remove the SystemZ backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142878 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-24 23:48:32 +00:00
Daniel Dunbar
bf79f91941 Regenerate projects/sample/configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142457 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-18 23:10:58 +00:00
Daniel Dunbar
2532fa21a9 projects/sample: Import adapted form of current LLVM autoconf/Makefile setup so that projects/sample is standalone and not tied to the LLVM build setup.
- This currently just moves over all of the behavior from LLVM. Eventually all of the configure checks that are directly needed by the LLVM build setup should probably go away, and the project should manage their own configuration checks if necessary.

 - This is the 1st half of this work, the actual Makefile.common hasn't moved over yet. I've tried to stage this in such a way that incremental builds will properly reconfigure for most active developers (the Makefiles don't handle reconfiguring in a perfectly reliable way, and I haven't found an easy way to make them do so).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142456 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-18 23:10:47 +00:00
Chris Lattner
7a2bdde0a0 Fix a ton of comment typos found by codespell. Patch by
Luis Felipe Strano Moraes!



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129558 91177308-0d34-0410-b5e6-96231b3b80d8
2011-04-15 05:18:47 +00:00
Peter Collingbourne
2bf4b54a80 Regen configure
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121646 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-12 21:42:01 +00:00
Peter Collingbourne
1fbf5a492e Fix paths; AutoRegen.sh changes its current working directory to be the
autoconf directory, but these paths need to be relative to the main
source directory.  Patch originally by Dan Gohman, r67655.

Also, cause configure.ac to find absolute paths to LLVM source and
object trees.   Together, fixes PR1220.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121645 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-12 21:41:56 +00:00
Michael J. Spencer
3cc52ea33c I swear I did a make clean and make before committing all this...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120304 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-29 18:47:54 +00:00
Wesley Peck
15c4bb926f Testing subversion commit access
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96948 91177308-0d34-0410-b5e6-96231b3b80d8
2010-02-23 15:11:17 +00:00
Eric Christopher
1f1092920a Fix autoconf llvm srcdir location for generic projects.
Patch by Torvald Riegel!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94405 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-25 04:10:28 +00:00
Chandler Carruth
8b67f774e9 Move DataTypes.h to include/llvm/System, update all users. This breaks the last
direct inclusion edge from System to Support.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85086 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-26 01:35:46 +00:00
Torok Edwin
6493798d83 install-sh chmods to 0755 by default, and this causes 'git diff' to show
that all the Makefiles changed mode.
Fix this by tellint install-sh to chmod
only to 0644, these are not executable files after all!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80371 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-28 16:12:48 +00:00
Chris Lattner
929a49356e remove dead makefile flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74065 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-24 05:29:56 +00:00
Dan Gohman
324f608a45 Revert r67655 and r67656, as they are breaking the build. I'm
not going to persue this further at this time.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67666 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-25 00:52:11 +00:00
Dan Gohman
2594706ef7 LLVM's master Makefile.common is in LLVM_SRC_ROOT, not LLVM_OBJ_ROOT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67658 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-25 00:09:05 +00:00
Dan Gohman
d02a281aa5 Regenerate configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67656 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:47:11 +00:00
Dan Gohman
497e863c74 Fix paths; AutoRegen.sh changes its current working directory to be the
autoconf directory, but these paths need to be relative to the main
source directory.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67655 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:46:25 +00:00
Dan Gohman
c9ebae3389 Update for autoconf 2.6x;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67654 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:45:13 +00:00
Dan Gohman
9f16bcb59f Fix bash-isms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67647 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 20:21:37 +00:00
Nick Lewycky
206b59acf0 Add "sample" documentation to sample project.
This fixes part of PR2793.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56198 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-15 05:31:29 +00:00
John Criswell
e644ef7b09 Convert .cvsignore files
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37801 91177308-0d34-0410-b5e6-96231b3b80d8
2007-06-29 16:35:07 +00:00
Chris Lattner
9bc823ec54 avoid collision with /usr/bin/sample if this ever gets installed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34387 91177308-0d34-0410-b5e6-96231b3b80d8
2007-02-18 03:03:41 +00:00
Reid Spencer
19d220419a Make sample project -pedantic clean.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31391 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-03 00:09:53 +00:00
Reid Spencer
42fe455d37 For PR780:
1. Change the usage of LOADABLE_MODULE so that it implies all the things
   necessary to make a loadable module. This reduces the user's burdern to
   get a loadable module correctly built.
2. Document the usage of LOADABLE_MODULE in the MakefileGuide
3. Adjust the makefile for lib/Transforms/Hello to use the new specification
   for building loadable modules
4. Adjust the sample project to not attempt to build a shared library for
   its little library. This was just wasteful and not instructive at all.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29551 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-07 23:12:15 +00:00
Reid Spencer
72f42bbc9b For PR786:
Turn -pedantic and -Wno-long-long compile flags on by default. In a few
places, avoid the warnings by removing these options in the local makefile.
One notable exception: lib/Target/CBackend/Writer.cpp. These warnings are
left on as a reminder to developers to clean them up.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28614 91177308-0d34-0410-b5e6-96231b3b80d8
2006-06-01 01:55:21 +00:00
Reid Spencer
30ea4787ea Have the AutoRegen.sh script prompt the user for the LLVM src and obj
directories if it can't find them. Then, replace those values into the
configure.ac script and pass them to the LLVM_CONFIG_PROJECT so that the
values become the default for llvm_src and llvm_obj variables. In this way
the user is required to input this exactly once, and the scripts take it
from there.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27798 91177308-0d34-0410-b5e6-96231b3b80d8
2006-04-18 06:27:47 +00:00
Reid Spencer
5a4b9e7b5f Ignored generated files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27016 91177308-0d34-0410-b5e6-96231b3b80d8
2006-03-23 23:53:13 +00:00
Robert Bocchino
6b2b0136a9 Fixed Makefile so it does, indeed, build a dynamic library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25135 91177308-0d34-0410-b5e6-96231b3b80d8
2006-01-06 22:51:19 +00:00
Andrew Lenharth
3027321a76 oops
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22334 91177308-0d34-0410-b5e6-96231b3b80d8
2005-07-05 16:36:18 +00:00
Andrew Lenharth
c2640d0d9e updates
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22333 91177308-0d34-0410-b5e6-96231b3b80d8
2005-07-05 15:18:33 +00:00
Jeff Cohen
b02fbfc485 Eliminate tabs and trailing spaces
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21479 91177308-0d34-0410-b5e6-96231b3b80d8
2005-04-23 21:26:11 +00:00
Reid Spencer
421ec0554d Update to reflect various changes in the autoconf directory. THe
recommended configuration of projects is now much simplified and depends
on LLVM file presence rather than local project file presence.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20312 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:53:47 +00:00
Reid Spencer
bcb178fbe6 Remove auxilliary files that are now picked up from llvm/autoconf. This
avoids version conflict problems with ltmain.sh (libtool), mkinstalldirs
and install-sh. This prevents projects from becoming stale when the LLVM
build system is upgraded or modified.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20311 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:52:22 +00:00
Reid Spencer
1a87ddc03b * Move all the "standard" configuration stuff to the start of the file
* Make the auxilliary directory be llvm/autoconf not the project's
* Use the LLVM_CONFIG_PROJECT macro to get the --with-llvm{src,obj} args


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20310 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:50:53 +00:00