This patch moves the processing of pointer induction variables in
collectLoopUniforms from the consecutive pointer phase of the analysis to the
phi node phase. Previously, if a pointer induction variable was used by both a
scalarized non-memory instruction as well as a vectorized memory instruction,
we would incorrectly identify the pointer as uniform. Pointer induction
variables should be treated the same as other phi nodes. That is, they are
uniform if all users of the induction variable and induction variable update
are uniform.
Differential Revision: https://reviews.llvm.org/D24511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281485 91177308-0d34-0410-b5e6-96231b3b80d8
The test case included in r280979 wasn't checking what it was supposed to be
checking for the predicated store case. Fixing the test revealed that the
multi-use case (when a pointer is used by both vectorized and scalarized memory
accesses) wasn't being handled properly. We can't skip over
non-consecutive-like pointers since they may have looked consecutive-like with
a different memory access.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280992 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, all consecutive pointers were marked uniform after vectorization.
However, if a consecutive pointer is used by a memory access that is eventually
scalarized, the pointer won't remain uniform after all. An example is
predicated stores. Even though a predicated store may be consecutive, it will
still be scalarized, making it's pointer operand non-uniform.
This patch updates the logic in collectLoopUniforms to consider the cases where
a memory access may be scalarized. If a memory access may be scalarized, its
pointer operand is not marked uniform. The determination of whether a given
memory instruction will be scalarized or not has been moved into a common
function that is used by the vectorizer, cost model, and legality analysis.
Differential Revision: https://reviews.llvm.org/D24271
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280979 91177308-0d34-0410-b5e6-96231b3b80d8
For uniform instructions, we're only required to generate a scalar value for
the first vector lane of each unroll iteration. Thus, if we have a reverse
interleaved group, computing the member index off the scalar GEP corresponding
to the last vector lane of its pointer operand technically makes the GEP
non-uniform. We should compute the member index off the first scalar GEP
instead.
I've added the updated member index computation to the existing reverse
interleaved group test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280497 91177308-0d34-0410-b5e6-96231b3b80d8
We can now maintain scalar values in VectorLoopValueMap. Thus, we no longer
have to create temporary vectors with insertelement instructions when handling
pointer induction variables. This case was mistakenly missed from r279649 when
refactoring the other scalarization code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280405 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves the allocation of VectorParts for PHI nodes into the actual
PHI widening code. Previously, we allocated these VectorParts in
vectorizeBlockInLoop, and passed them by reference to widenPHIInstruction. Upon
returning, we would then map the VectorParts in VectorLoopValueMap. This
behavior is problematic for the cases where we only want to generate a scalar
version of a PHI node. For example, if in the future we only generate a scalar
version of an induction variable, we would end up inserting an empty vector
entry into the map once we return to vectorizeBlockInLoop. We now no longer
need to pass VectorParts to the various PHI widening functions, and we can keep
VectorParts allocation as close as possible to the point at which they are
actually mapped in VectorLoopValueMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280390 91177308-0d34-0410-b5e6-96231b3b80d8
After r279649 when getting a vector value from VectorLoopValueMap, we create an
insertelement sequence on-demand if the value has been scalarized instead of
vectorized. We previously inserted this insertelement sequence before the
value's first vector user. However, this insert location is problematic if that
user is the phi node of a first-order recurrence. With this patch, we move the
insertelement sequence after the last scalar instruction we created when
scalarizing the value. Thus, the value's vector definition in the new loop will
immediately follow its scalar definitions. This should fix PR30183.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30183
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280001 91177308-0d34-0410-b5e6-96231b3b80d8
This patch unifies the data structures we use for mapping instructions from the
original loop to their corresponding instructions in the new loop. Previously,
we maintained two distinct maps for this purpose: WidenMap and ScalarIVMap.
WidenMap maintained the vector values each instruction from the old loop was
represented with, and ScalarIVMap maintained the scalar values each scalarized
induction variable was represented with. With this patch, all values created
for the new loop are maintained in VectorLoopValueMap.
The change allows for several simplifications. Previously, when an instruction
was scalarized, we had to insert the scalar values into vectors in order to
maintain the mapping in WidenMap. Then, if a user of the scalarized value was
also scalar, we had to extract the scalar values from the temporary vector we
created. We now aovid these unnecessary scalar-to-vector-to-scalar conversions.
If a scalarized value is used by a scalar instruction, the scalar value is used
directly. However, if the scalarized value is needed by a vector instruction,
we generate the needed insertelement instructions on-demand.
A common idiom in several locations in the code (including the scalarization
code), is to first get the vector values an instruction from the original loop
maps to, and then extract a particular scalar value. This patch adds
getScalarValue for this purpose along side getVectorValue as an interface into
VectorLoopValueMap. These functions work together to return the requested
values if they're available or to produce them if they're not.
The mapping has also be made less permissive. Entries can be added to
VectorLoopValue map with the new initVector and initScalar functions.
getVectorValue has been modified to return a constant reference to the mapped
entries.
There's no real functional change with this patch; however, in some cases we
will generate slightly different code. For example, instead of an insertelement
sequence following the definition of an instruction, it will now precede the
first use of that instruction. This can be seen in the test case changes.
Differential Revision: https://reviews.llvm.org/D23169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279649 91177308-0d34-0410-b5e6-96231b3b80d8
div/rem instructions in basic blocks that require predication currently prevent
vectorization. This patch extends the existing mechanism for predicating stores
to handle other instructions and leverages it to predicate divs and rems.
Differential Revision: https://reviews.llvm.org/D22918
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279620 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: I later (after r278573) found that LoopIterator.h has some overlapping with LoopBodyTraits. It's good to use LoopBodyTraits because a *Traits struct is algorithm independent.
Reviewers: anemet, nadav, mkuper
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278996 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of the find is only used to compare against end(), just
use is_contained instead.
No functionality change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278469 91177308-0d34-0410-b5e6-96231b3b80d8
Shifts with a uniform but non-constant count were considered very expensive to
vectorize, because the splat of the uniform count and the shift would tend to
appear in different blocks. That made the splat invisible to ISel, and we'd
scalarize the shift at codegen time.
Since r201655, CodeGenPrepare sinks those splats to be next to their use, and we
are able to select the appropriate vector shifts. This updates the cost model to
to take this into account by making shifts by a uniform cheap again.
Differential Revision: https://reviews.llvm.org/D23049
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277782 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the vectorizer to generate both scalar and vector versions
of an integer induction variable for a given loop. Previously, we only
generated a scalar induction variable if we knew all its users were going to be
scalar. Otherwise, we generated a vector induction variable. In the case of a
loop with both scalar and vector users of the induction variable, we would
generate the vector induction variable and extract scalar values from it for
the scalar users. With this patch, we now generate both versions of the
induction variable when there are both scalar and vector users and select which
version to use based on whether the user is scalar or vector.
Differential Revision: https://reviews.llvm.org/D22869
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277474 91177308-0d34-0410-b5e6-96231b3b80d8
This patch refactors the logic in collectLoopUniforms and
collectValuesToIgnore, untangling the concepts of "uniform" and "scalar". It
adds isScalarAfterVectorization along side isUniformAfterVectorization to
distinguish the two. Known scalar values include those that are uniform,
getelementptr instructions that won't be vectorized, and induction variables
and induction variable update instructions whose users are all known to be
scalar.
This patch includes the following functional changes:
- In collectLoopUniforms, we mark uniform the pointer operands of interleaved
accesses. Although non-consecutive, these pointers are treated like
consecutive pointers during vectorization.
- In collectValuesToIgnore, we insert a value into VecValuesToIgnore if it
isScalarAfterVectorization rather than isUniformAfterVectorization. This
differs from the previous functionaly in that we now add getelementptr
instructions that will not be vectorized into VecValuesToIgnore.
This patch also removes the ValuesNotWidened set used for induction variable
scalarization since, after the above changes, it is now equivalent to
isScalarAfterVectorization.
Differential Revision: https://reviews.llvm.org/D22867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277460 91177308-0d34-0410-b5e6-96231b3b80d8
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276554 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves the update instruction for vectorized integer induction phi
nodes to the end of the latch block. This ensures consistent placement of all
induction updates across all the kinds of int inductions we create (scalar,
splat vector, or vector phi).
Differential Revision: https://reviews.llvm.org/D22416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276339 91177308-0d34-0410-b5e6-96231b3b80d8
Test coverage is provided by modifying the function in the FP-math
testcase that we are allowed to vectorize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276223 91177308-0d34-0410-b5e6-96231b3b80d8
The earlier change added hotness attribute to missed-optimization
remarks. This follows up with the analysis remarks (the ones explaining
the reason for the missed optimization).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276192 91177308-0d34-0410-b5e6-96231b3b80d8
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
The recommit fixed the testcase global_alias.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275936 91177308-0d34-0410-b5e6-96231b3b80d8
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275912 91177308-0d34-0410-b5e6-96231b3b80d8
This patch swaps A and B in the interleaved access analysis and clarifies
related comments. The algorithm is more intuitive if we let access A precede
access B in program order rather than the reverse. This change was requested in
the review of D19984.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275567 91177308-0d34-0410-b5e6-96231b3b80d8
We now collect all accesses with a constant stride, not just the ones with a
stride greater than one. This change was requested in the review of D19984.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275473 91177308-0d34-0410-b5e6-96231b3b80d8
This patch prevents increases in the number of instructions, pre-instcombine,
due to induction variable scalarization. An increase in instructions can lead
to an increase in the compile-time required to simplify the induction
variables. We now maintain a new map for scalarized induction variables to
prevent us from converting between the scalar and vector forms.
This patch should resolve compile-time regressions seen after r274627.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275419 91177308-0d34-0410-b5e6-96231b3b80d8
The LCSSA pass itself will not generate several redundant PHI nodes in a single
exit block. However, such redundant PHI nodes don't violate LCSSA form, and may
be introduced by passes that preserve LCSSA, and/or preserved by the LCSSA pass
itself. So, assuming a single PHI node per exit block is not safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275217 91177308-0d34-0410-b5e6-96231b3b80d8
Use range-based for loops instead of doing everything manually.
Use auto when appropriate.
No functional change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275205 91177308-0d34-0410-b5e6-96231b3b80d8
We currently always vectorize induction variables. However, if an induction
variable is only used for counting loop iterations or computing addresses with
getelementptr instructions, we don't need to do this. Vectorizing these trivial
induction variables can create vector code that is difficult to simplify later
on. This is especially true when the unroll factor is greater than one, and we
create vector arithmetic when computing step vectors. With this patch, we check
if an induction variable is only used for counting iterations or computing
addresses, and if so, scalarize the arithmetic when computing step vectors
instead. This allows for greater simplification.
This patch addresses the suboptimal pointer arithmetic sequence seen in
PR27881.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27881
Differential Revision: http://reviews.llvm.org/D21620
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274627 91177308-0d34-0410-b5e6-96231b3b80d8
This will be re-used by the LoadStoreVectorizer.
Fix handling of range metadata and testcase by Justin Lebar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274281 91177308-0d34-0410-b5e6-96231b3b80d8
Except the seed uniform instructions (conditional branch and consecutive ptr
instructions), dependencies to be added into uniform set should only be used
by existing uniform instructions or intructions outside of current loop.
Differential Revision: http://reviews.llvm.org/D21755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274262 91177308-0d34-0410-b5e6-96231b3b80d8
