locks must be matched with unlocks. Also, use calloc to allocate the
block so that it is properly zero'd. Thanks to Nick Kledzik for
tracking this down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69314 91177308-0d34-0410-b5e6-96231b3b80d8
is appropriate. This helps visually differentiate host-oriented
calculations from target-oriented calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68227 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
allocating memory in the JIT. This is insanely inefficient, but
hey, most people implement their own memory managers anyway.
Patch by Eric Yew!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66472 91177308-0d34-0410-b5e6-96231b3b80d8
and extern_weak_odr. These are the same as the non-odr versions,
except that they indicate that the global will only be overridden
by an *equivalent* global. In C, a function with weak linkage can
be overridden by a function which behaves completely differently.
This means that IP passes have to skip weak functions, since any
deductions made from the function definition might be wrong, since
the definition could be replaced by something completely different
at link time. This is not allowed in C++, thanks to the ODR
(One-Definition-Rule): if a function is replaced by another at
link-time, then the new function must be the same as the original
function. If a language knows that a function or other global can
only be overridden by an equivalent global, it can give it the
weak_odr linkage type, and the optimizers will understand that it
is alright to make deductions based on the function body. The
code generators on the other hand map weak and weak_odr linkage
to the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66339 91177308-0d34-0410-b5e6-96231b3b80d8
1. When the JIT is asked to remove a function, updating it's
mapping to 0, we invalidate any function stubs used only
by that function. Now, also invalidate the JIT's mapping
from the GV the stub pointed to, to the address of the GV.
2. When dlsym stubs for cross-process JIT are enabled, do not
abort just because a named function cannot be found in the
JIT's process.
3. Fix various assumptions about when it is ok to use the lazy
resolver when non-lazy JITing is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66324 91177308-0d34-0410-b5e6-96231b3b80d8
This invalidates the stubs in the resolver map when they are no longer referenced,
and should the JIT memory manager ever pick up a deallocateStub interface, the
JIT could reclaim the memory for unused stubs as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66141 91177308-0d34-0410-b5e6-96231b3b80d8
on failure to resolve it.
Do not abort on failure to resolve an external symbol when using dlsym stubs,
since the symbol may not be in the JIT's address space. Just use 0.
Allow dlsym stubs to differentiate between GlobalVars and Functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66050 91177308-0d34-0410-b5e6-96231b3b80d8
that has not been JIT'd yet, the callee is put on a list of pending functions
to JIT. The call is directed through a stub, which is updated with the address
of the function after it has been JIT'd. A new interface for allocating and
updating empty stubs is provided.
Add support for removing the ModuleProvider the JIT was created with, which
would otherwise invalidate the JIT's PassManager, which is initialized with the
ModuleProvider's Module.
Add support under a new ExecutionEngine flag for emitting the infomration
necessary to update Function and GlobalVariable stubs after JITing them, by
recording the address of the stub and the name of the GlobalValue. This allows
code to be copied from one address space to another, where libraries may live
at different virtual addresses, and have the stubs updated with their new
correct target addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64906 91177308-0d34-0410-b5e6-96231b3b80d8
there.
This changes the interpreter to use libffi. After this patch, the interpreter
will barely be able to call any external functions if built on a system without
libffi installed (just enough to pass 'make check' really). But with libffi,
we can now call any function that isn't variadic or taking a struct or vector
parameter (but pointer to struct is fine). Patch by Alexei Svitkine!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63723 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a rebuild of 'configure' itself. I will be committing that next, but
built with the wrong version of autoconf. Somebody who has the right one, please update
it.
As a side-note, because of the way autoconf works, all built tools will link against
libffi, not just lli. If you know how to fix this, please let me know ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62553 91177308-0d34-0410-b5e6-96231b3b80d8
Split Support/Registry.h into two files so that we have less to
recompile every time CommandLine.h is changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62312 91177308-0d34-0410-b5e6-96231b3b80d8
SingleSource/UnitTests/2007-04-25-weak.c in JIT mode. The test
now passes on systems which are able to produce a correct
reference output to compare with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61674 91177308-0d34-0410-b5e6-96231b3b80d8
This is a short term workaround. The current solution is for the JIT memory manager to manage code and data memory separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58688 91177308-0d34-0410-b5e6-96231b3b80d8
Since the ARM constant pool handling supercedes the standard LLVM constant
pool entirely, the JIT emitter does not allocate space for the constants,
nor initialize the memory. The constant pool is considered part of the
instruction stream.
Likewise, when resolving relocations into the constant pool, a hook into
the target back end is used to resolve from the constant ID# to the
address where the constant is stored.
For now, the support in the ARM emitter is limited to 32-bit integer. Future
patches will expand this to the full range of constants necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58338 91177308-0d34-0410-b5e6-96231b3b80d8
variable is moved to the execution engine. The JIT calls the TargetJITInfo
to allocate thread local storage. Currently, only linux/x86 knows how to
allocate thread local global variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58142 91177308-0d34-0410-b5e6-96231b3b80d8
this handling to work properly for modifying stub functions, relocations
back to entry points after JIT compilation, etc..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57013 91177308-0d34-0410-b5e6-96231b3b80d8
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56622 91177308-0d34-0410-b5e6-96231b3b80d8
whose darwin code was written after the ability to dynamically register frames,
we need to do special hacks to make things work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55507 91177308-0d34-0410-b5e6-96231b3b80d8
Also skip indirect encoding for platforms that ask for one: we direclty
write an address, not a pointer to the address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54987 91177308-0d34-0410-b5e6-96231b3b80d8
model, except for external calls; this makes
addressing modes PC-relative. Incomplete.
The assertion at the top of Emitter::runOnMachineFunction
was obviously bogus (always true) so I removed it.
If someone knows what the correct test should be to cover
all the various targets, please fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54656 91177308-0d34-0410-b5e6-96231b3b80d8
Evan broke it in r54523 by adding a parameter in the implementation without
updating the header correspondingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54555 91177308-0d34-0410-b5e6-96231b3b80d8
are allocated in the same buffer as the code,
jump tables, etc.
The default JIT memory manager does not handle buffer
overflow well. I didn't introduce this and I'm not
attempting to fix it here, but it is more likely to
be hit now since we're putting more stuff in the
buffer. This affects one test that I know of so far,
MultiSource/Benchmarks/NPB-serial/is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54442 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
InvalidateInstructionCache method instead of calling through
a hook on the JIT. This is a host feature, not a target feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52734 91177308-0d34-0410-b5e6-96231b3b80d8
1. The "JITState" object creates a PassManager with the ModuleProvider that the
jit is created with. If the ModuleProvider is removed and deleted, the
PassManager is invalid.
2. The Global maps in the JIT were not invalidated with a ModuleProvider was
removed. This could lead to a case where the Module would be freed, and a
new Module with Globals at the same addresses could return invalid results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51384 91177308-0d34-0410-b5e6-96231b3b80d8
are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both. The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51118 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
function has already been codegen'd. This is required by the Java class loading
mechanism which executes Java code when materializing a function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49988 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, introduction of XXX::Create methods
for Users that have a potentially variable number of
Uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49277 91177308-0d34-0410-b5e6-96231b3b80d8
tools. This is currently only enabled on the mac, but could easily be
supported by other hosts that are interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49207 91177308-0d34-0410-b5e6-96231b3b80d8
