Summary:
This patch will add loop metadata on the pre and post loops generated by IRCE.
Currently, we have metadata for disabling optimizations such as vectorization,
unrolling, loop distribution and LICM versioning (and confirmed that these
optimizations check for the metadata before proceeding with the transformation).
The pre and post loops generated by IRCE need not go through loop opts (since
these are slow paths).
Added two test cases as well.
Reviewers: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26806
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289588 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289573 91177308-0d34-0410-b5e6-96231b3b80d8
since bpf instruction stream is multiple of 8 change llvm-objdump
to print decimal instruction number instead of hex address, so that
users don't have to do this math manually to match kernel verifier output
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289569 91177308-0d34-0410-b5e6-96231b3b80d8
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289566 91177308-0d34-0410-b5e6-96231b3b80d8
Many places pass around a DWARFDebugInfoEntryMinimal and a DWARFUnit. It is easy to get things wrong by using the wrong DWARFUnit with a DWARFDebugInfoEntryMinimal. This patch creates a DWARFDie class that contains the DWARFUnit and DWARFDebugInfoEntryMinimal objects so that they can't get out of sync. All attribute extraction has been moved out of DWARFDebugInfoEntryMinimal and into DWARFDie. DWARFDebugInfoEntryMinimal was also renamed to DWARFDebugInfoEntry.
DWARFDie objects are temporary objects that are used by clients and contain 2 pointers that you always need to have anyway. Keeping them grouped will avoid errors and simplify many of the attribute extracting APIs by not having to pass in a DWARFUnit.
Differential Revision: https://reviews.llvm.org/D27634
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289565 91177308-0d34-0410-b5e6-96231b3b80d8
Implement DirName from scratch to avoid dependencies on external libraries.
It's based on MSDN documentation for Naming Files, Paths, and Namespaces.
The algorithm can't simply start from the end and look backwards for the
first separator, because we need to preserve the prefix that represent
the root location. We shouldn't remove anything there. In Windows we
have many different options, like:
\\Server\Share\ , \ , C: , C:\ , \\?\C:\ , \\?\UNC\Server\Share\
We remove the last separator in the rest of the path, if it exists.
It was implemented to have a similar behaviour to dirname() in linux,
removing trailing separators, returning "." when the path doesn't
contain separators, etc.
Differential Revision: https://reviews.llvm.org/D27579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289562 91177308-0d34-0410-b5e6-96231b3b80d8
I added a new flag RunningCB to know if the Fuzzer's main thread is
running the CB function, instead of using (!CurrentUnitSize).
(!CurrentUnitSize) doesn't work properly. For example, in FuzzerLoop.cpp,
inside ShuffleAndMinimize() function, we execute the callback with an
empty string (size=0). Previous implementation failed to detect timeouts
in that execution.
Also, I add a regression test for that case.
Differential Revision: https://reviews.llvm.org/D27433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289561 91177308-0d34-0410-b5e6-96231b3b80d8
Reorganize #includes to follow LLVM Coding Standards.
Include some missing headers. Required to use `Printf()`.
Aside from that, this patch contains no functional change.
It is purely a re-organization.
Differential Revision: https://reviews.llvm.org/D27363
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289560 91177308-0d34-0410-b5e6-96231b3b80d8
std:🧵:hardware_concurrency() returns an unsigned, so I modify
NumberOfCpuCores() to return unsigned too.
The number of cpus is used to define the number of workers, so I decided
to update the worker and jobs flags to be declared as unsigned too.
Differential Revision: https://reviews.llvm.org/D27685
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289559 91177308-0d34-0410-b5e6-96231b3b80d8
Use unsigned for PID instead of signed int. GetCurrentProcessId() returns
an unsigned (DWORD) so we must be sure we can deal with all possible values.
I use a long unsigned to be sure it can hold a 32 bit unsigned (DWORD).
Differential Revision: https://reviews.llvm.org/D27281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289558 91177308-0d34-0410-b5e6-96231b3b80d8
Add new flags to FuzzingOptions to represent the different conditions
on the signal handling. These options are passed when calling
SetSignalHandler().
This changes simplify the implementation of Windows's exception
handling. Now we can define a unique handler for all the exceptions.
Differential Revision: https://reviews.llvm.org/D27238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289557 91177308-0d34-0410-b5e6-96231b3b80d8
StringLiteral is a wrapper around a string literal useful for
replacing global tables of char arrays with global tables of
StringRefs that can initialized in a constexpr context, avoiding
the invocation of a global constructor.
Differential Revision: https://reviews.llvm.org/D27686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289551 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is last in of a series of patches to evolve ADCE.cpp to support
removing of unnecessary control flow.
This patch adds the code to update the control and data flow graphs
to remove the dead control flow.
Also update unit tests to test the capability to remove dead,
may-be-infinite loop which is enabled by the switch
-adce-remove-loops.
Previous patches:
D23824 [ADCE] Add handling of PHI nodes when removing control flow
D23559 [ADCE] Add control dependence computation
D23225 [ADCE] Modify data structures to support removing control flow
D23065 [ADCE] Refactor anticipating new functionality (NFC)
D23102 [ADCE] Refactoring for new functionality (NFC)
Reviewers: dberlin, majnemer, nadav, mehdi_amini
Subscribers: llvm-commits, david2050, freik, twoh
Differential Revision: https://reviews.llvm.org/D24918
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289548 91177308-0d34-0410-b5e6-96231b3b80d8
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bits which constitute the resulting OR value. If all the OR bits come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: hfinkel, RKSimon, filcab
Differential Revision: https://reviews.llvm.org/D26149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289538 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need to extract+test the sign bit of the known ones/zeros, we can use sext which will handle all of this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289534 91177308-0d34-0410-b5e6-96231b3b80d8
N32 relocations are only correct for individual relocations at the moment.
Support for relocation composition will follow in a later patch.
Patch By: Daniel Sanders
Reviwers: vkalintiris, atanasyan
Differential Revision: https://reviews.llvm.org/D27467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289532 91177308-0d34-0410-b5e6-96231b3b80d8
In certain cases it is possible that transient instructions such as
%reg = IMPLICIT_DEF as a single instruction in a basic block to reach
the MipsHazardSchedule pass. This patch teaches MipsHazardSchedule to
properly look through such cases.
Reviewers: vkalintiris, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D27209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289529 91177308-0d34-0410-b5e6-96231b3b80d8
Only the lower bits of the input element are used. And only the lower element can be undef since the upper bits are zeroed.
Have InstCombineCalls call SimplifyDemandedVectorElts for these intrinsics to reuse this support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289523 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Since we don't break BBs for function calls. We might get some insane counts
(wrap of unsigned) in the presence of noreturn calls.
This patch sets these counts to zero instead of the wrapped number.
Reviewers: davidxl
Subscribers: xur, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D27602
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289521 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pass will be used to relax instructions which use out of bounds
memory accesses to equivalent operations that can work with the
addresses.
The pass currently implements relaxation for the STDWPtrQRr instruction.
Without this pass, an assertion error would be hit in the pseudo expansion pass.
In the future, we will need to add more instructions to this pass. We can do
that on a case-by-case basic.
Reviewers: arsenm, kparzysz
Subscribers: wdng, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27650
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289517 91177308-0d34-0410-b5e6-96231b3b80d8
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289510 91177308-0d34-0410-b5e6-96231b3b80d8
The stack slot reuse code had a really amusing bug. We ended up only reusing a stack slot exact once (initial use + reuse) within a basic block. If we had a third statepoint to process, we ended up allocating a new set of stack slots. If we crossed a basic block boundary, the set got cleared. As a result, code which is invoke heavy doesn't see the problem, but multiple calls within a basic block does. Net result: as we optimize invokes into calls, lowering gets worse.
The root error here is that the bitmap uses by the custom allocator wasn't kept in sync. The result was that we ended up resizing the bitmap on the next statepoint (to handle the cross block case), reset the bit once, but then never reset it again.
Differential Revision: https://reviews.llvm.org/D25243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289509 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out if you were on windows and your default target wasn't windows the system-windows feature wasn't getting enabled.
This fixes that and updates the coff-dwarf test to rely on the new "target-windows" feature. That test was the reason why system-windows was changed to not always be enabled on Windows hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289503 91177308-0d34-0410-b5e6-96231b3b80d8
These extra specializations were added in the depths of history (r67984 from
2009) and are clearly problematic now. The pointers actually are aligned to the
default (8 bytes), since otherwise UBsan would be complaining loudly.
I *think* it originally made sense because there was no "alignof" to infer the
correct value so the generic case went with what malloc returned (8-byte
aliged objects), and on 32-bit machines this specialization was correct. It
became wrong when we started compiling for 64-bit, and caused a UBSan failure
when we tried to put a ValueHandle into a DenseMap.
Should fix the Green Dragon UBSan bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289496 91177308-0d34-0410-b5e6-96231b3b80d8
