If all the operands to a phi node are of the same operation, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the operation should
be the merged debug locations of the phi node arguments.
Patch 2 of 8 for D26256. Folding of a binary operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289679 91177308-0d34-0410-b5e6-96231b3b80d8
Since SGPRs should spill to VGPRs, they should be allocated first.
I don't think this is sufficient for SGPRs to always spill to
VGPRs though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289671 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: We used to create SampleProfileLoader pass in clang. This makes LTO/ThinLTO unable to add this pass in the linker plugin. This patch moves the SampleProfileLoader pass creation from clang to llvm pass manager builder.
Reviewers: tejohnson, davidxl, dnovillo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27743
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289669 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The current test only checks whether ld64 is available, causing tests
to fail when ld64 is avilable but libLTO is not built.
Reviewers: beanz, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27739
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289662 91177308-0d34-0410-b5e6-96231b3b80d8
Given two debug locations the function getMergedLocation combines the
locations into a single location (which may be an empty location).
Please see https://reviews.llvm.org/D26256 for the discussion leading
up to this API.
Note the function is currently a stub. This allows optimisations to
use the API although no location will actually be used.
This is patch 1 out of 8 for D26256. As suggested by David Blaikie,
each change in D26256 has been broken out into a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289661 91177308-0d34-0410-b5e6-96231b3b80d8
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289659 91177308-0d34-0410-b5e6-96231b3b80d8
Generalize sdiv/udiv/srem/urem combines using APInt::isPowerOf2, which only works for const/splat-const values, to call SelectionDAG::isKnownToBeAPowerOfTwo instead which recognises many more cases.
Added a DAGCombiner::BuildLogBase2 helper since PowerOf2 combines often involve taking the log2 of such a value.
Differential Revision: https://reviews.llvm.org/D27714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289654 91177308-0d34-0410-b5e6-96231b3b80d8
adding new optimization opportunity by adding new X86ISelLowering pattern. The test case was shown in https://llvm.org/bugs/show_bug.cgi?id=30945.
Test explanation:
Select gets three arguments mask, op and op2. In this case, the Mask is a result of ICMP. The ICMP instruction compares (with equal operand) the zero initializer vector and the result of the first ICMP.
In general, The result of "cmp eq, op1, zero initializers" is "not(op1)" where op1 is a mask. By rearranging of the two arguments inside the Select instruction, we can get the same result. Without the necessary of the middle phase ("cmp eq, op1, zero initializers").
Missed optimization opportunity:
vpcmpled %zmm0, %zmm1, %k0
knotw %k0, %k1
can be combine to
vpcmpgtd %zmm0, %zmm2, %k1
Reviewers:
1. delena
2. igorb
Commited after check all
Differential Revision: https://reviews.llvm.org/D27160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289653 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r289648, as it's an execution test and relies on the
emulator/dispatcher being available on all builders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289651 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289643 91177308-0d34-0410-b5e6-96231b3b80d8
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. This will yield subtle bugs if
interposition is attempted. As a result, regardless of whether we're in PIC
mode, we don't assume that we need to add the nop to support the possibility of
ELF interposition. However, the necessary check is in place (i.e. calling
GV->isInterposable and TM.shouldAssumeDSOLocal) so when we have functions for
which interposition is allowed at the IR level, we'll add the nop as necessary.
In the mean time, we'll generate more tail calls and fewer nops when compiling
position-independent code.
Differential Revision: https://reviews.llvm.org/D27231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289638 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289631 91177308-0d34-0410-b5e6-96231b3b80d8
Now we only pass bit 0 of the DemandedElts to optimize operand 1 as we recurse since the upper bits are unused. Similarly we clear bit 0 for optimizing operand 0.
Also calculate UndefElts correctly.
Simplify InstCombineCalls for these instrinics to just call SimplifyDemandedVectorElts for the call instrution to reuse this support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289629 91177308-0d34-0410-b5e6-96231b3b80d8
Now we only pass bit 0 of the DemandedElts to optimize operand 1 as we recurse since the upper bits are unused.
Also calculate UndefElts correctly.
Simplify InstCombineCalls for these instrinics to just call SimplifyDemandedVectorElts for the call instrution to reuse this support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289628 91177308-0d34-0410-b5e6-96231b3b80d8
Bots are broken and needs to be fixed before having this on by default.
The feature was committed in r289619.
I tried to disable it in r289624 and failed because it was initialized in two places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289626 91177308-0d34-0410-b5e6-96231b3b80d8
Bots are broken and needs to be fixed before having this on by default.
The feature was committed in r289619.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289624 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up to r289256, address a FIXME to avoid resetting the column
number. This reduced .debug_line by 2.6% in a RelWithDebInfo
self-build of clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289620 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Given a flag (-mllvm -reverse-iterate) this patch will enable iteration of SmallPtrSet in reverse order.
The idea is to compile the same source with and without this flag and expect the code to not change.
If there is a difference in codegen then it would mean that the codegen is sensitive to the iteration order of SmallPtrSet.
This is enabled only with LLVM_ENABLE_ABI_BREAKING_CHECKS.
Reviewers: chandlerc, dexonsmith, mehdi_amini
Subscribers: mgorny, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D26718
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289619 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LinkDyLib is only used (before arg processing) to set up the default for
LinkMode. So reset LinkMode as well, and process before --link-shared or
--link-static to allow those flags to continue to override it.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289608 91177308-0d34-0410-b5e6-96231b3b80d8
This change re-lands r289215, by reverting r289482. The underlying
issue that caused it to be reverted has been fixed by Tim Northover in
r289496.
Original commit message for r289215:
[SCEVExpander] Use llvm data structures; NFC
Original commit message for r289482:
Revert "[SCEVExpander] Use llvm data structures; NFC"
This reverts r289215 (git SHA1 cb7b86a1). It breaks the ubsan build
because a DenseMap that keys off of `AssertingVH<T>` will hit UB when it
tries to cast the empty and tombstone keys to `T *` (due to insufficient
alignment).
This is the relevant stack trace (thanks to Mike Aizatsky):
#0 0x25cf100 in llvm::AssertingVH<llvm::PHINode>::getValPtr() const llvm/include/llvm/IR/ValueHandle.h:212:39
#1 0x25cea20 in llvm::AssertingVH<llvm::PHINode>::operator=(llvm::AssertingVH<llvm::PHINode> const&) llvm/include/llvm/IR/ValueHandle.h:234:19
#2 0x25d0092 in llvm::DenseMapBase<llvm::DenseMap<llvm::AssertingVH<llvm::PHINode>, llvm::detail::DenseSetEmpty, llvm::DenseMapInfo<llvm::AssertingVH<llvm::PHINode> >, llvm::detail::DenseSetPair<llvm::AssertingVH<llvm::PHINode> > >, llvm::AssertingVH<llvm::PHINode>, llvm::detail::DenseSetEmpty, llvm::DenseMapInfo<llvm::AssertingVH<llvm::PHINode> >, llvm::detail::DenseSetPair<llvm::AssertingVH<llvm::PHINode> > >::clear() llvm/include/llvm/ADT/DenseMap.h:113:23
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289602 91177308-0d34-0410-b5e6-96231b3b80d8
