The ARMv8 ARMARM states that for these instructions in A64 state:
"Unspecified bits in "imm5" are ignored but should be set to zero by an assembler.", (imm4 for INS).
Make the disassembler accept any encoding with these ignored bits set to 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234896 91177308-0d34-0410-b5e6-96231b3b80d8
This pass will always try to insert llvm.SI.ifbreak intrinsics
in the same block that its conditional value is computed in. This is
a problem when conditions for breaks or continue are computed outside
of the loop, because the llvm.SI.ifbreak intrinsic ends up being inserted
outside of the loop.
This patch fixes this problem by inserting the llvm.SI.ifbreak
intrinsics in the loop header when the condition is computed outside
the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234891 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this check the following case failed:
Skip a SubBlock which is not a MODULE_BLOCK_ID nor a BLOCKINFO_BLOCK_ID
Got to end of file
TheModule would still be == nullptr, and we would subsequentially fail
when materializing the Module (assert at the start of
BitcodeReader::MaterializeModule).
Bug found with AFL.
Reviewers: dexonsmith, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234887 91177308-0d34-0410-b5e6-96231b3b80d8
Some targets (ie. Mips) have additional rules for ordering the relocation
table entries. Allow them to override generic sortRelocs(), which sorts
entries by Offset.
Then override this function for Mips, to emit HI16 and GOT16 relocations
against the local symbol in pair with the corresponding LO16 relocation.
Patch by Vladimir Stefanovic.
Differential Revision: http://reviews.llvm.org/D7414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234883 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo::getRegPressureLimit has a note that it is an old
model that relies on manually entered classes. Using the newer model of
register pressure sets seems more appropriate. We might eventually even
switch to lib/CodeGen/RegisterPressure.cpp, but we should probably do
incremental changes here.
Using the newer model also makes it easier to take regmasks into account
which is necessary to fix llvm.org/PR23143. I am currently also
preparing a patch for that, but would like to do this switch
independently.
Review: http://reviews.llvm.org/D8986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234880 91177308-0d34-0410-b5e6-96231b3b80d8
The testcase that is included in the patch caused a crash when doing DebugInfoFinder::processModule
on the module due to DCT->getElements() returning nullptr in DebugInfoFinder::processType.
By doing "DCT->getElements()" instead of "DCT->getElements()->operands()" one gets a DIArray
instead of a raw MDTuple. The former has code to handle null as a 0-element array and
therefore avoids the crash.
Differential Revision: http://reviews.llvm.org/D9008
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234875 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This transformation reassociates a n-ary add so that the add can partially reuse
existing instructions. For example, this pass can simplify
void foo(int a, int b) {
bar(a + b);
bar((a + 2) + b);
}
to
void foo(int a, int b) {
int t = a + b;
bar(t);
bar(t + 2);
}
saving one add instruction.
Fixes PR22357 (https://llvm.org/bugs/show_bug.cgi?id=22357).
Test Plan: nary-add.ll
Reviewers: broune, dberlin, hfinkel, meheff, sanjoy, atrick
Reviewed By: sanjoy, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234855 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DICompileUnit::replaceSubprograms()` and
`DICompileUnit::replaceGlobalVariables()` to match the `MDCompileUnit`
equivalents that they're wrapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234852 91177308-0d34-0410-b5e6-96231b3b80d8
When a loadable (.so or .dylib) pass is built with assertions enabled and
loaded into the 'opt' tool, we need to ensure that the extra symbols that such
passes depend on are linked into the tool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234851 91177308-0d34-0410-b5e6-96231b3b80d8
Gut the `DIDescriptor` wrappers around `MDLocalScope` subclasses. Note
that `DILexicalBlock` wraps `MDLexicalBlockBase`, not `MDLexicalBlock`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234850 91177308-0d34-0410-b5e6-96231b3b80d8
Bring function documentation for ScalarEvolutionExpander up to code by
not repeating the function name in the comment documenting
functionality. Reflow the edited comments where needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234847 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Runtime unrolling of loops needs to emit an expression to compute the
loop's runtime trip-count. Avoid runtime unrolling if this computation
will be expensive.
Depends on D8993.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8994
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234846 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Teach `isHighCostExpansion` to consider divisions by power-of-two
constants as cheap and add a test case. This change is needed for a new
user of `isHighCostExpansion` that will be added in a subsequent change.
Depends on D8995.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8993
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234845 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move isHighCostExpansion from IndVarSimplify to SCEVExpander. This
exposed function will be used in a subsequent change.
Reviewers: bogner, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234844 91177308-0d34-0410-b5e6-96231b3b80d8
Add a few functions from `DILexicalBlock` to `MDLexicalBlockBase`,
leaving `DILexicalBlock` a simple wrapper.
IMO, the new functions (`getLine()` and `getColumn()`) don't really
belong in the base class, but to simplify transitioning old code it
seems like the right incremental step. I've explicitly deleted them in
`MDLexicalBlockFile`, and eventually the callers should be updated to
downcast to `MDLexicalBlock` directly and the forwarding functions
removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234842 91177308-0d34-0410-b5e6-96231b3b80d8
Gut all the non-pointer API from the variable wrappers, except an
implicit conversion from `DIGlobalVariable` to `DIDescriptor`. Note
that if you're updating out-of-tree code, `DIVariable` wraps
`MDLocalVariable` (`MDVariable` is a common base class shared with
`MDGlobalVariable`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234840 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first in a series of patches to eventually add support for TLS relocations to RuntimeDyld. This patch resolves an issue in the current GOT handling, where GOT entries would be reused between object files, which leads to the same situation that necessitates the GOT in the first place, i.e. that the 32-bit offset can not cover all of the address space. Thus this patch makes the GOT object-file-local.
Unfortunately, this still isn't quite enough, because the MemoryManager does not yet guarantee that sections are allocated sufficiently close to each other, even if they belong to the same object file. To address this concern, this patch also adds a small API abstraction on top of the GOT allocation mechanism that will allow (temporarily, until the MemoryManager is improved) using the stub mechanism instead of allocating a different section. The actual switch from separate section to stub mechanism will be part of a follow-on commit, so that it can be easily reverted independently at the appropriate time.
Test Plan: Includes a test case where the GOT of two object files is artificially forced to be apart by several GB.
Reviewers: lhames
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234839 91177308-0d34-0410-b5e6-96231b3b80d8
I don't think this API is helping much. Change the callers to call
`MDType::isBlockByrefStruct()` directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234837 91177308-0d34-0410-b5e6-96231b3b80d8
Gut a couple more classes in the DIDescriptor hierarchy. Leave behind
an implicit conversion to `DIDescriptor`, the old base class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234836 91177308-0d34-0410-b5e6-96231b3b80d8
This is along the same lines as r234832, but for `DILocation`. Clean
out all accessors from `DILocation`. Any callers should be using
`MDLocation` directly (e.g., via `operator->()`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234835 91177308-0d34-0410-b5e6-96231b3b80d8
Fix oversight in -analyze output. PtrRtCheck contains the pointers that
need to be checked against each other and not whether memchecks are
necessary.
For instance in the testcase PtrRtCheck has four elements but all
no-alias so no checking is necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234833 91177308-0d34-0410-b5e6-96231b3b80d8
Completely gut `DIExpression`, turning it into a simple wrapper around
`MDExpression *`. There are two bits of magic left:
- It's constructed from `const MDExpression*` but convertible to
`MDExpression*`.
- It's default-constructed to `nullptr`.
Otherwise, it should behave quite like a raw pointer. Once I've done
the same to the rest of the `DIDescriptor` subclasses, I'll come back to
delete them entirely (and update call sites as necessary to deal with
the missing magic).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234832 91177308-0d34-0410-b5e6-96231b3b80d8
Before we had real liveness, we needed to track every value that base pointer
insertion code created because these now might be live. We now just rerun
the data flow liveness algorithm (which is actually faster!) and no longer
need the associated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234827 91177308-0d34-0410-b5e6-96231b3b80d8
As documented in PR23200 (and the FIXMEs I've added to the code here),
this logic is fairly broken: it modifies the `LLVMContext` in a way that
affects other modules and cannot be serialized to assembly/bitcode. For
now, move it over to `MDLocation::computeNewDiscriminators()` anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234825 91177308-0d34-0410-b5e6-96231b3b80d8
I don't see a reason to add the `copyWithNewScope()` API over to
`MDLocation` -- it seems to be a holdover from when creating locations
required knowing details of operand layout -- so change
`AddDiscriminators` to call `MDLocation::get()` directly. Should be no
functionality change here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234824 91177308-0d34-0410-b5e6-96231b3b80d8
There's only one user of the various `DIObjCProperty::is*Property()`
accessors -- `DwarfUnit::constructTypeDIE()` -- and it's just using the
reverse logic to reconstruct the bitfield. Drop this API and simplify
the only caller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234818 91177308-0d34-0410-b5e6-96231b3b80d8
This keeps the program and JIT output in sync, enabling FileCheck to test the
order of target program and JIT events.
In particular we can now test that main is not compiled until after the global
constructor has run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234815 91177308-0d34-0410-b5e6-96231b3b80d8
These accessors in `DIDerivedType` should only be called when `DbgNode`
really is a `MDDerivedType`, not just a `MDDerivedTypeBase`. Assume
that it is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234812 91177308-0d34-0410-b5e6-96231b3b80d8
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234809 91177308-0d34-0410-b5e6-96231b3b80d8
debugging output to the LLI orc-lazy JIT, and update the orc-lazy "hello.ll"
test to actually test for lazy compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234805 91177308-0d34-0410-b5e6-96231b3b80d8
This is almost NFC, but I'm removing some assertions against `nullptr`.
The assertions aren't worth all that much since we'll typically get
segfaults at the same site (and I imagine ASan catches this sort of
thing), and besides: the whole idea is to replace the `DIDescriptor`
hierarchy with raw pointers to the new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234802 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of calling the somewhat confusingly-named
`DIVariable::isInlinedFnArgument()`, do the check directly here.
There's possibly a small functionality change here: instead of
`dyn_cast<>`'ing `DV->getScope()` to `MDSubprogram`, I'm looking up the
scope chain for the actual subprogram. I suspect that this is a no-op
for function arguments so in practise there isn't a real difference.
I've also added a `FIXME` to check the `inlinedAt:` chain instead, since
I wonder if that would be more reliable than the
`MDSubprogram::describes()` function.
Since this was the only user of `DIVariable::isInlinedFnArgument()`,
delete it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234799 91177308-0d34-0410-b5e6-96231b3b80d8
