32-bit writes on amd64 zero out the high bits of the corresponding 64-bit
register. LLVM makes use of this for zero-extension, but until now relied on
custom MCLowering and other code to fixup instructions. Now we have proper
handling of sub-registers, this can be done by creating SUBREG_TO_REG
instructions at selection-time.
Should be no change in functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182921 91177308-0d34-0410-b5e6-96231b3b80d8
The code to distinguish between unaligned and aligned addresses was
already there, so this is mostly just a switch-on-and-test process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182920 91177308-0d34-0410-b5e6-96231b3b80d8
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182908 91177308-0d34-0410-b5e6-96231b3b80d8
In fact, we're probably going to support these flags in completely different
ways. So this test is no longer valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182899 91177308-0d34-0410-b5e6-96231b3b80d8
I additionally changed certain checks to use EXPECT_FALSE instead of a boolean
complement with EXPECT_TRUE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182896 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.
Patch by Xiaoyi Guo!
This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182885 91177308-0d34-0410-b5e6-96231b3b80d8
This corrects a problem where x86 instructions that implicitly define/use both
an A-register (RAX, EAX, ..) and EFLAGS were declared as only defining/using
EFLAGS, because the outer "let Defs/Uses = [EFLAGS]" in the various multiclasses
overrides the "let Defs/Uses = [areg]" in BinOpAI.
The instructions deriving from BinOpAI were moved out of the "let Defs", and a
BinOpAI_FF class was created, for instructions that implicitly define and use
EFLAGS and the A-register (SBC, ADC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182883 91177308-0d34-0410-b5e6-96231b3b80d8
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of test-suite on A15 hardware with --optimize-option=-O0 and
all the tests pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182877 91177308-0d34-0410-b5e6-96231b3b80d8
This allows rematerialization during register coalescing to handle
more cases involving operations like SUBREG_TO_REG which might need to
be rematerialized using sub-register indices.
For example, code like:
v1(GPR64):sub_32 = MOVZ something
v2(GPR64) = COPY v1(GPR64)
should be convertable to:
v2(GPR64):sub_32 = MOVZ something
but previously we just gave up in places like this
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182872 91177308-0d34-0410-b5e6-96231b3b80d8
Since the testing case uses ref_addr, which requires version 3+ to work,
we will solve the dwarf version issue first.
This patch also causes failures in one of the bots. I will update the patch
accordingly in my next attempt.
rdar://13926659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182867 91177308-0d34-0410-b5e6-96231b3b80d8
Tidy up three places where the register class for ARM and Thumb wasn't
restrictive enough:
- No PC dest for reg-reg add/orr/sub.
- No PC dest for shifts.
- No PC or SP for Thumb2 reg-imm add.
I encountered this while combining FastISel with
-verify-machineinstrs. These instructions defined registers whose
classes weren't restrictive enough, and the uses failed
verification. They're also undefined in the ISA, or would produce code
that FastISel wouldn't want. This doesn't fix the register class
narrowing issue (where uses should restrict definitions), and isn't
thorough, but it's a small step in the right direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182863 91177308-0d34-0410-b5e6-96231b3b80d8
This updates the debug info metadata schema documentation for various
schema changes made recently surrounding filename information for
scopes and the representation of imported entities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182817 91177308-0d34-0410-b5e6-96231b3b80d8
This patch solves the problem of numeric register values not being accepted:
../set_alias.s:1:11: error: expected valid expression after comma
.set r4,$4
^
The parsing of .set directive is changed and handling of symbols in code
as well to enable this feature.
The test example is added.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182807 91177308-0d34-0410-b5e6-96231b3b80d8
- llvm.loop.parallel metadata has been renamed to llvm.loop to be more generic
by making the root of additional loop metadata.
- Loop::isAnnotatedParallel now looks for llvm.loop and associated
llvm.mem.parallel_loop_access
- document llvm.loop and update llvm.mem.parallel_loop_access
- add support for llvm.vectorizer.width and llvm.vectorizer.unroll
- document llvm.vectorizer.* metadata
- add utility class LoopVectorizerHints for getting/setting loop metadata
- use llvm.vectorizer.width=1 to indicate already vectorized instead of
already_vectorized
- update existing tests that used llvm.loop.parallel and
llvm.vectorizer.already_vectorized
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182802 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read-modify-write the target bits when processing
relocations for the MCJIT. This had the problem that when relocations
were processed multiple times for the same object file (as they can
be), the result is not idempotent and the values became corrupted.
The solution to this is to take any bits used in the destination from
the pristine object file as LLVM emitted it.
This should fix PR16013 and remote MCJIT on ARM ELF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182800 91177308-0d34-0410-b5e6-96231b3b80d8
from a different CU.
We used to print out an error message and fail to generate inlined_subroutine.
If we use ref_addr in the generated DWARF, the DWARF version should be 3 or
above.
rdar://13926659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182791 91177308-0d34-0410-b5e6-96231b3b80d8
The size reduction in the RegDiffLists are rather dramatic. Here are a few
size differences for MCTargetDesc.o files (before and after) in bytes:
R600 - 36160B - 11184B - 69% reduction
ARM - 28480B - 8368B - 71% reduction
Mips - 816B - 576B - 29% reduction
One side effect of dynamically computing the aliases is that the iterator does
not guarantee that the entries are ordered or that duplicates have been removed.
The documentation implies this is a safe assumption and I found no clients that
requires these attributes (i.e., strict ordering and uniqueness).
My local LNT tester results showed no execution-time failures or significant
compile-time regressions (i.e., beyond what I would consider noise) for -O0g,
-O2 and -O3 runs on x86_64 and i386 configurations.
rdar://12906217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182783 91177308-0d34-0410-b5e6-96231b3b80d8
Extend LinkModules to pass a ValueMaterializer to RemapInstruction and friends to lazily create Functions for lazily linked globals. This is a big win when linking small modules with large (mostly unused) library modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182776 91177308-0d34-0410-b5e6-96231b3b80d8
