test(node): cover the sweep's boot wiring and prove an interrupted push never reaches the upload

Two claims from earlier commits were argued rather than executed. Both are now
observed.

The legacy-CID sweep's spawn sat inline in main() where no test could reach it,
so the batch size, the inter-batch delay, the detachment and the shutdown select
were all reasoned. The block moves verbatim into `spawn_legacy_cid_sweep`, which
a test calls directly. It seeds rows whose keys are already canonical, so the
cost gate skips each and the persisted cursor reads out walk progress cleanly,
then asserts the cursor stops at the configured batch boundary, the call returns
without blocking, the task is still alive inside its delay, and shutdown ends it.
Never spawning, reading the batch or delay from the wrong knob, or removing the
shutdown branch each turns it red. What remains reasoned is the single call line
inside main(), down from a twenty-six line block.

The claim that a disconnect-interrupted push never uploads to Tigris was
structural: the tests build the store with no Tigris client, so a counter inside
the client arm could never move and would have proved nothing. The counter now
sits at the upload decision, before the client is consulted, and the disconnect
test asserts zero while the success test asserts exactly one. That positive
control is what makes the zero meaningful, and it is itself load-bearing:
releasing the success path with failure semantics drops it to zero, and adding a
Drop impl that uploads raises the disconnect count to one.

The counter observes reaching the upload site, not an S3 request. TigrisClient
wraps a concrete SDK client with no injectable endpoint, and plumbing one through
would be out of proportion to the risk here.

.cargo/audit.toml

@@ -0,0 +1,38 @@
+# cargo-audit configuration.
+#
+# cargo-audit reads its config from .cargo/audit.toml (relative to the working
+# directory) or ~/.cargo/audit.toml. It does NOT read a repo-root audit.toml,
+# and there is no CLI flag to point at a config file (`-f` is the lockfile path).
+# This file lives at .cargo/audit.toml for that reason.
+#
+# The audit job stays hard-fail: only the advisories explicitly listed below are
+# suppressed, so any NEW advisory still breaks CI. Each entry below has no
+# available upstream fix; everything fixable is fixed in Cargo.lock instead.
+#
+# Tracking: the hickory ignores are reachable accepted risk. A scheduled re-check
+# (.github/workflows/audit-schedule.yml) runs without these ignores and fails if
+# the lockfile moves off the pinned vulnerable versions while the ignores remain.
+
+[advisories]
+ignore = [
+    # hickory-proto 0.25.2 (pulled by libp2p-dns 0.44 -> hickory-resolver 0.25).
+    # REACHABLE: the node wraps its QUIC transport in the system DNS resolver
+    # (crates/gitlawb-node/src/p2p/mod.rs:238), so a malicious DNS response can
+    # trigger these DoS paths. No fix is available: the latest libp2p-dns on
+    # crates.io is 0.44 and pins hickory 0.25; the fix requires hickory >=0.26.1.
+    # REMOVE both once libp2p-dns ships a release using hickory 0.26 (verified
+    # 2026-06-21: cargo update -p hickory-proto locks 0 packages; still 0.25.2).
+    # Tracking: https://github.com/Gitlawb/node/issues/76
+    "RUSTSEC-2026-0118", # hickory NSEC3 closest-encloser unbounded loop
+    "RUSTSEC-2026-0119", # hickory O(n^2) name-compression CPU exhaustion
+
+    # rsa 0.9.10 (Marvin timing sidechannel). Present in Cargo.lock because sqlx
+    # resolves sqlx-mysql unconditionally, and sqlx-mysql depends on rsa. cargo
+    # audit scans the lockfile, so it flags rsa even though it is NOT linked into
+    # our binary: sqlx is built postgres-only (crates/gitlawb-node/Cargo.toml),
+    # so the MySQL RSA auth path is never compiled and there is no RSA oracle to
+    # attack. No upstream fix exists regardless. REMOVE this ignore if sqlx is
+    # ever built with the `mysql` feature, or any other consumer of rsa enters
+    # the build, at which point it becomes a real reachable advisory.
+    "RUSTSEC-2023-0071", # rsa Marvin attack (no fix; not linked in our build)
+]

.env.example

@@ -21,6 +21,23 @@ GITLAWB_REPOS_DIR=/data/repos
 # When using the bundled docker-compose, this is wired automatically.
 DATABASE_URL=postgresql://gitlawb:changeme@localhost:5432/gitlawb
 
+# ── Database pool & startup resilience ────────────────────────────────────
+# Maximum connections in the PostgreSQL pool. A cap, not a floor —
+# connections open lazily. Size against the DB server's max_connections,
+# remembering admin tooling opens its own pool.
+GITLAWB_DB_MAX_CONNECTIONS=20
+# Seconds a request waits for a pool connection before failing with 503.
+GITLAWB_DB_ACQUIRE_TIMEOUT_SECS=5
+# Upper bound on each startup connect+migrate attempt, in seconds. Keep it
+# generous enough for a peer instance to finish migrating (the migration
+# advisory lock is held across a deploy); on expiry the attempt is retried.
+GITLAWB_DB_CONNECT_TIMEOUT_SECS=60
+# Startup retry backoff while the database is unavailable: first delay and
+# ceiling, in seconds. The node stays up serving 503s (with a truthful
+# /ready) instead of crash-looping.
+GITLAWB_DB_RETRY_INITIAL_SECS=5
+GITLAWB_DB_RETRY_MAX_SECS=60
+
 # ── IPFS pinning (Pinata) ─────────────────────────────────────────────────
 # Get a JWT at https://app.pinata.cloud/developers/api-keys
 GITLAWB_PINATA_JWT=
@@ -63,13 +80,149 @@ POSTGRES_PASSWORD=changeme
 
 # ── P2P networking ────────────────────────────────────────────────────────
 GITLAWB_P2P_PORT=7546
-# Comma-separated multiaddrs of bootstrap peers
+# Comma-separated HTTP peer URLs to announce to on startup.
+# The binary also ships with bootstrap-peers.json; set
+# GITLAWB_BOOTSTRAP_DISABLE_SEEDS=true for isolated dev/test networks.
 GITLAWB_BOOTSTRAP_PEERS=
+GITLAWB_BOOTSTRAP_DISABLE_SEEDS=false
+# Require signatures on peer announce/sync write routes. Keep false during
+# rolling upgrades so existing live nodes can still communicate.
+GITLAWB_REQUIRE_SIGNED_PEER_WRITES=false
+
+# Require the authenticated pusher to be the repo owner on git-receive-pack.
+# A valid did:key signature is authentication, not authorization: anyone can
+# sign as their own DID. When true, pushes from a non-owner DID are rejected.
+# Keep false until the repo owner is ready for owner-only writes.
+GITLAWB_ENFORCE_OWNER_PUSH=false
+
+# Comma-separated libp2p multiaddrs.
+# Example: /ip4/1.2.3.4/udp/7546/quic-v1/p2p/12D3KooW...
+GITLAWB_P2P_BOOTSTRAP=
 
 # ── Access control ────────────────────────────────────────────────────────
-# Set to false to require auth on all read endpoints
+# Reserved for private-read mode. Public/private repo read enforcement is not
+# wired in the current live release; do not rely on this for private repositories.
 GITLAWB_PUBLIC_READ=true
 
+# Maximum git smart-HTTP pack request size, in bytes.
+GITLAWB_MAX_PACK_BYTES=2147483648
+
+# Max seconds a served git upload-pack / receive-pack (clone / push) may run
+# before it is aborted with a 504. Bounds a hung git that would otherwise pin a
+# worker and, on push, the repo write lock. Also bounds both info/refs
+# advertisements, the withheld-blob pack build, and the push-side candidate
+# discovery (rev-list / cat-file), all reaped via process-group teardown (#174).
+# Default 600.
+GITLAWB_GIT_SERVICE_TIMEOUT_SECS=600
+
+# Max seconds the storage-ACQUISITION phase of a served git op may run before the
+# request is shed with a 503, separate from the git-run timeout above. A
+# concurrency permit is taken before this phase and GITLAWB_GIT_SERVICE_TIMEOUT_SECS
+# only starts once git spawns, so without this a stalled backend (a hung Tigris
+# HEAD/GET, or a hung pg advisory-lock iteration on push) pins the permit and drains
+# the pool until every later request 503s. On expiry the permit is released
+# (fail-closed). Kept separate because acquisition and git execution are distinct
+# cost centers. Must be positive; set very large to effectively disable. Default 30.
+GITLAWB_GIT_ACQUIRE_TIMEOUT_SECS=30
+
+# Max concurrent git READ ops (upload-pack + the upload-pack info/refs
+# advertisement) served at once, a global pool separate from the push pool below.
+# The anon receive-pack info/refs advertisement has its OWN pool (see below), not
+# this one. Over-cap sheds a clean 503 + Retry-After. Anonymous reads draw from
+# here, so pair it with GITLAWB_MAX_CONCURRENT_READS_PER_CALLER (below) so one
+# caller cannot monopolize the pool. Default 128.
+GITLAWB_MAX_CONCURRENT_GIT_OPS=128
+
+# Max concurrent git-receive-pack (push) POST operations, in a pool separate from
+# the read pool (GITLAWB_MAX_CONCURRENT_GIT_OPS) so anonymous reads cannot shed an
+# authenticated push at admission. The anon receive-pack info/refs advertisement
+# runs in a SEPARATE pool of the same size (disjoint from this one), so an
+# advertisement flood cannot shed a push either. Over-cap sheds a 503 +
+# Retry-After. Default 32.
+GITLAWB_MAX_CONCURRENT_GIT_PUSHES=32
+
+# Max concurrent read ops (upload-pack + the upload-pack info/refs advertisement)
+# a single caller may hold, so one caller cannot monopolize the read pool. Keyed
+# on the resolved SOURCE IP, never the DID: a signature does not move a caller off
+# this cap. The source-IP key is only as granular as GITLAWB_TRUSTED_PROXY below:
+# left unset, a node behind an edge/NAT keys all callers on the edge IP and this
+# collapses to one global cap. Set GITLAWB_TRUSTED_PROXY for per-client keying; a
+# high-fanout caller (CI behind one NAT) then needs the operator to raise this.
+# Default 16.
+GITLAWB_MAX_CONCURRENT_READS_PER_CALLER=16
+
+# ── Push rate limiting (git-receive-pack flood brake) ─────────────────────
+# Max receive-pack requests (info/refs advertisement + push POST) per client
+# IP per hour. 0 disables. Default 600.
+GITLAWB_PUSH_RATE_LIMIT=600
+
+# ── /ipfs/{cid} visibility-walk admission (#174) ──────────────────────────
+# GET /ipfs/{cid} runs a per-repo full-history git walk in a blocking thread to
+# decide whether the caller may read a path-scoped blob. It is publicly reachable,
+# so it is bounded to keep a permissionless caller from fanning out unbounded
+# concurrent walks and exhausting blocking-pool threads + PIDs.
+# Max concurrent /ipfs walks across all callers (a pool of its own, disjoint from
+# the served-git pools). Over-cap sheds a 503. Default 32.
+GITLAWB_MAX_CONCURRENT_IPFS_WALKS=32
+# Max concurrent /ipfs walks a single SOURCE IP may hold (keyed like the git
+# per-caller caps via GITLAWB_TRUSTED_PROXY; reject-before-insert bounded map).
+# Default 4.
+GITLAWB_IPFS_WALK_PER_SOURCE=4
+# Max legacy (NULL-provenance) repos probed per single /ipfs request, bounding the
+# scan-fallback fan-out (git cat-file per candidate repo) for an anonymous caller. A
+# truncated scan sheds a retryable 503, never a false 404. Default 256.
+GITLAWB_IPFS_MAX_REPOS_WALKED=256
+# Max /ipfs/{cid} requests per client IP per hour (route flood brake, distinct
+# from the concurrency caps above). 0 disables. Default 600.
+GITLAWB_IPFS_RATE_LIMIT=600
+
+# ── Creation rate limiting (repo/agent/issue/PR flood brake) ──────────────
+# Max creation requests (POST /api/v1/repos, /api/register, fork, issues,
+# pulls) per client IP per hour, in addition to the per-DID limit. The per-DID
+# limit alone is bypassed by a did:key farm (one throwaway identity per repo),
+# which is how spam-repo floods slip past it and the iCaptcha gate; the per-IP
+# brake caps a single-source flood. Uses GITLAWB_TRUSTED_PROXY below to resolve
+# the client IP. 0 disables. Default 120.
+GITLAWB_CREATE_RATE_LIMIT=120
+
+# ── Peer-sync rate limiting (per client IP, uses GITLAWB_TRUSTED_PROXY below) ─
+# /api/v1/peers/announce and /api/v1/sync/notify accept unsigned requests from
+# known peers and run at higher frequency, so a generous bucket. Separate from
+# the trigger bucket so an unsigned notify flood can't drain trigger's quota.
+# 0 disables. Default 600.
+GITLAWB_PEER_WRITE_RATE_LIMIT=600
+# /api/v1/sync/trigger requires a signature and fans out to every peer per call,
+# so it gets a tight bucket. 0 disables. Default 60.
+GITLAWB_SYNC_TRIGGER_RATE_LIMIT=60
+
+# Which forwarded header the edge is trusted to set, used to resolve the real
+# client IP for the push limiter. One of:
+#   (unset) — no trusted proxy: key on the socket peer address, ignore headers.
+#   fly     — behind Fly's edge (trust Fly-Client-IP).
+#   x-forwarded-for — behind a single reverse proxy like Caddy/NGINX (trust the
+#             rightmost X-Forwarded-For hop).
+# Only set this when a proxy you control actually fronts the node; trusting a
+# forwarded header on a directly-exposed node lets clients spoof the key.
+GITLAWB_TRUSTED_PROXY=
+
 # ── Sync ─────────────────────────────────────────────────────────────────
 # Enable automatic background sync from known peers
 GITLAWB_AUTO_SYNC=false
+
+# ── iCaptcha proof-of-intelligence gate ───────────────────────────────────
+# Optional gate on create_repo + register: require callers to present an
+# iCaptcha proof (X-ICaptcha-Proof header) earned at icaptcha.gitlawb.com.
+# Default off = fully inert (no behavior change).
+#   off     - gate disabled (default)
+#   shadow  - verify + log would-be rejections, but always allow
+#   enforce - reject requests without a valid, strong-enough proof
+ICAPTCHA_MODE=off
+# Optional base64url Ed25519 public key override; if unset it is fetched from
+# ICAPTCHA_URL/v1/pubkey at startup. Recommended in production: pinning the key
+# removes the startup dependency on the iCaptcha service being reachable and
+# avoids silently running inert if that one-time fetch fails.
+ICAPTCHA_PUBKEY=
+# Minimum proof difficulty level required to pass.
+ICAPTCHA_REQUIRED_LEVEL=3
+# Base URL of the iCaptcha service.
+ICAPTCHA_URL=https://icaptcha.gitlawb.com

.github/CODEOWNERS

@@ -0,0 +1,11 @@
+# Ownership for CI, release, and security-sensitive infrastructure.
+# A PR that edits these paths requires review from a code owner once
+# branch protection's "Require review from Code Owners" is enabled.
+
+/.github/                      @beardthelion
+/Dockerfile                    @beardthelion
+/Dockerfile.bins               @beardthelion
+/docker-compose.yml            @beardthelion
+/release-please-config.json    @beardthelion
+/.release-please-manifest.json @beardthelion
+/SECURITY.md                   @beardthelion

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,66 @@
+name: Bug report
+description: Report a defect in a Gitlawb crate or node behavior
+labels: ["bug"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for the report. Please fill in the fields below so we can reproduce the issue.
+        For security vulnerabilities, do NOT open an issue — follow SECURITY.md instead.
+  - type: textarea
+    id: what-happened
+    attributes:
+      label: What happened?
+      description: A clear description of the bug.
+    validations:
+      required: true
+  - type: textarea
+    id: expected
+    attributes:
+      label: Expected behavior
+    validations:
+      required: true
+  - type: textarea
+    id: repro
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. ...
+        2. ...
+        3. ...
+    validations:
+      required: true
+  - type: dropdown
+    id: crate
+    attributes:
+      label: Affected crate
+      options:
+        - gitlawb-node
+        - gl
+        - git-remote-gitlawb
+        - gitlawb-core
+        - not sure / other
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version or commit
+      description: Output of the binary's `--version`, or the git commit you built.
+    validations:
+      required: true
+  - type: textarea
+    id: environment
+    attributes:
+      label: Environment
+      description: OS, Rust version (`rustc --version`), and anything else relevant.
+    validations:
+      required: false
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant logs
+      description: Paste logs or errors. This will be rendered as code, no need for backticks.
+      render: shell
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,8 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Security vulnerability
+    url: https://github.com/Gitlawb/node/blob/main/SECURITY.md
+    about: Please report security issues privately per our security policy, not as a public issue.
+  - name: Questions & discussion
+    url: https://github.com/Gitlawb/node/discussions
+    about: For usage questions and open-ended discussion.

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -0,0 +1,34 @@
+name: Feature request
+description: Suggest an improvement or new capability
+labels: ["enhancement"]
+body:
+  - type: textarea
+    id: problem
+    attributes:
+      label: Problem / use case
+      description: What are you trying to do that's hard or impossible today?
+    validations:
+      required: true
+  - type: textarea
+    id: proposal
+    attributes:
+      label: Proposed solution
+    validations:
+      required: true
+  - type: textarea
+    id: alternatives
+    attributes:
+      label: Alternatives considered
+    validations:
+      required: false
+  - type: dropdown
+    id: protocol
+    attributes:
+      label: Does this touch the protocol?
+      description: Identity, signatures, UCAN, ref certs, or P2P wire formats. Protocol changes need an issue discussion before any PR.
+      options:
+        - "No"
+        - "Yes"
+        - "Not sure"
+    validations:
+      required: true

.github/pull_request_template.md

@@ -0,0 +1,63 @@
+<!--
+  Thanks for contributing to Gitlawb. Keep PRs focused on one change.
+  Protocol-level changes (identity, signatures, wire format) should start
+  as an issue before code — see CONTRIBUTING.md.
+-->
+
+## Summary
+
+<!-- One or two sentences: what changes and why it matters. -->
+
+
+
+## Motivation & context
+
+<!-- What problem does this solve? Link prior discussion if any. -->
+Closes #
+
+## Kind of change
+
+- [ ] Bug fix
+- [ ] Feature
+- [ ] Security fix
+- [ ] Docs
+- [ ] Tests / CI
+- [ ] Refactor (no behavior change)
+- [ ] Breaking or protocol change (issue required first)
+
+## What changed
+
+<!-- Bullet the concrete changes. Note the crate(s) touched:
+     gitlawb-core / gitlawb-node / gl / git-remote-gitlawb -->
+
+-
+
+## How a reviewer can verify
+
+<!-- Commands to run, or repro steps for a bug plus proof it's fixed. -->
+
+```sh
+
+```
+
+## Before you request review
+
+- [ ] Scope is one logical change; no unrelated churn
+- [ ] `cargo test --workspace` passes locally
+- [ ] New behavior is covered by tests (required for fixes)
+- [ ] `cargo fmt --all` and `cargo clippy --workspace --all-targets -- -D warnings` are clean
+- [ ] Commit titles use Conventional Commits (`feat(...)`, `fix(...)`, `docs(...)`)
+- [ ] Docs / `.env.example` updated if behavior or config changed (or N/A)
+- [ ] Checked existing PRs so this isn't a duplicate
+
+## Protocol & signing impact
+
+<!-- Delete this block if your change doesn't touch the protocol. -->
+
+- [ ] Touches DID / `did:key`, Ed25519 / RFC 9421 signatures, UCAN, ref certs, or P2P wire formats
+- [ ] Discussed in an issue before implementation
+- [ ] Backward-compatible with existing nodes and previously signed history
+
+## Notes for reviewers
+
+<!-- Anything out of scope, follow-ups, or known limitations. Optional. -->

.github/workflows/audit-schedule.yml

@@ -0,0 +1,88 @@
+name: Scheduled Audit
+
+# Self-expiring suppression check (companion to the PR-blocking audit gate in
+# pr-checks.yml). Runs weekly. It re-runs cargo audit WITHOUT the .cargo/audit.toml
+# ignore list to surface the full advisory set for visibility, and it hard-fails
+# if the lockfile has moved off the pinned vulnerable versions while the ignores
+# are still present, i.e. the upstream fix landed but the ignore was not dropped.
+on:
+  schedule:
+    - cron: "0 6 * * 1" # Mondays 06:00 UTC
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+env:
+  CARGO_TERM_COLOR: always
+
+jobs:
+  scheduled-audit:
+    name: scheduled audit (no ignores)
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Set up Rust toolchain
+        uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
+        with:
+          toolchain: stable
+
+      - name: Cache cargo
+        uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
+        with:
+          key: audit-schedule
+
+      - name: Install cargo-audit (floating; drift canary)
+        # Deliberately UNPINNED, unlike the blocking gate in pr-checks.yml. This
+        # job is cron-only (weekly); it is never pull_request- or push-triggered,
+        # so it NEVER gates a merge no matter what it does. Floating the scanner
+        # here is the drift canary: if a newer cargo-audit regresses, at worst
+        # this weekly run reds (the install step below is unguarded) or its
+        # visibility report changes, and that is exactly the signal that latest
+        # has moved and the pinned gate should not be bumped yet. The scan result
+        # itself never fails the run (the "Full audit report" step is `|| true`
+        # and the only other hard-fail is a Cargo.lock grep). The point is that
+        # drift surfaces here without ever blocking a PR. Do NOT pin to match
+        # pr-checks.yml.
+        run: cargo install --locked cargo-audit
+
+      # Full advisory report with NO suppressions. Run from a scratch dir that
+      # has no .cargo/audit.toml so the ignore list does not apply; never fail
+      # the build on this step, it is visibility only.
+      - name: Full audit report (ignores not applied)
+        run: |
+          mkdir -p "$RUNNER_TEMP/full-audit"
+          cp Cargo.lock "$RUNNER_TEMP/full-audit/Cargo.lock"
+          cd "$RUNNER_TEMP/full-audit"
+          {
+            echo '### Full cargo audit (no ignores applied)'
+            echo '```'
+            cargo audit -f Cargo.lock || true
+            echo '```'
+          } >> "$GITHUB_STEP_SUMMARY"
+
+      # Drift guard: the hickory ignores are only valid while hickory-proto is
+      # pinned at 0.25.x. If the lockfile has moved past that, the upstream fix
+      # is in and the ignores in .cargo/audit.toml must be removed. Fail loudly.
+      - name: Fail if hickory moved past 0.25.x while ignores remain
+        run: |
+          set -euo pipefail
+          version="$(grep -A1 'name = "hickory-proto"' Cargo.lock | grep '^version' | head -1 | cut -d'"' -f2)"
+          echo "hickory-proto in Cargo.lock: ${version:-not present}"
+          ignores_present=false
+          if grep -q 'RUSTSEC-2026-011' .cargo/audit.toml; then
+            ignores_present=true
+          fi
+          # Drift = the lockfile no longer matches what the ignores assume:
+          # hickory moved off 0.25.x (fix shipped) OR was removed entirely
+          # (dead ignore entries left behind). Both must fail.
+          if [ "$ignores_present" = true ] && { [ -z "${version}" ] || [[ "${version}" != 0.25.* ]]; }; then
+            echo "::error::hickory-proto is ${version:-absent from Cargo.lock} but the RUSTSEC-2026-0118/0119 ignores are still in .cargo/audit.toml. The upstream fix appears to be available or the dependency is gone; remove the ignores."
+            exit 1
+          fi
+          echo "No drift: ignore list is consistent with the pinned hickory-proto version."

.github/workflows/pr-checks.yml

@@ -9,18 +9,25 @@ on:
 permissions:
   contents: read
 
+# Cancel superseded runs on the same PR/branch; never cancel runs on main.
+concurrency:
+  group: pr-checks-${{ github.ref }}
+  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
+
 env:
   CARGO_TERM_COLOR: always
   RUST_BACKTRACE: 1
 
 jobs:
-  fmt-clippy-test:
-    name: fmt + clippy + test
+  fmt-clippy:
+    name: fmt + clippy
     runs-on: ubuntu-latest
-
+    timeout-minutes: 30
     steps:
       - name: Check out repository
         uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
 
       - name: Set up Rust toolchain
         uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
@@ -37,5 +44,171 @@ jobs:
       - name: cargo clippy
         run: cargo clippy --workspace --all-targets -- -D warnings
 
+  test:
+    name: test (${{ matrix.toolchain }})
+    runs-on: ubuntu-latest
+    timeout-minutes: 45
+    strategy:
+      fail-fast: false
+      matrix:
+        toolchain: [stable, beta]
+    # Beta is informational: an upstream beta regression should warn, not block merges.
+    continue-on-error: ${{ matrix.toolchain == 'beta' }}
+    # Postgres for the DB-backed integration tests (#[sqlx::test] provisions an
+    # isolated database per test off this connection). The health-check gate keeps
+    # `cargo test` from racing a not-yet-ready server.
+    services:
+      postgres:
+        image: postgres:16
+        env:
+          POSTGRES_USER: postgres
+          POSTGRES_PASSWORD: postgres
+          POSTGRES_DB: gitlawb_test
+        ports:
+          - 5432:5432
+        options: >-
+          --health-cmd pg_isready
+          --health-interval 10s
+          --health-timeout 5s
+          --health-retries 5
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Set up Rust toolchain
+        uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
+        with:
+          toolchain: ${{ matrix.toolchain }}
+
+      - name: Cache cargo
+        uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
+        with:
+          key: ${{ matrix.toolchain }}
+
       - name: cargo test
+        env:
+          DATABASE_URL: postgres://postgres:postgres@localhost:5432/gitlawb_test
         run: cargo test --workspace
+
+  build-release:
+    name: build --release
+    runs-on: ubuntu-latest
+    timeout-minutes: 45
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Set up Rust toolchain
+        uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
+        with:
+          toolchain: stable
+
+      - name: Cache cargo
+        uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
+        with:
+          key: release
+
+      - name: cargo build --release
+        run: cargo build --release --workspace
+
+  audit:
+    name: cargo audit
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Set up Rust toolchain
+        uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
+        with:
+          toolchain: stable
+
+      - name: Cache cargo
+        uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
+        with:
+          key: audit-0.22.2
+
+      - name: Install cargo-audit (pinned)
+        # Pin the scanner on this BLOCKING gate: an unpinned `cargo install`
+        # floats to the latest release, so a regressed cargo-audit could red CI
+        # repo-wide with no code change. Advisory-DB freshness is fetched at scan
+        # time, independent of the binary, so this does not weaken what the gate
+        # catches. The weekly Scheduled Audit (audit-schedule.yml) deliberately
+        # floats to latest as the drift canary; when it shows a newer cargo-audit
+        # behaving differently, bump this version (and the cache key above) as a
+        # deliberate maintainer action. If 0.22.2 is ever yanked from crates.io
+        # this step fails loud until the pin is bumped.
+        run: |
+          set -euo pipefail
+          cargo install --locked --version 0.22.2 cargo-audit
+          # Assert the pin took effect so an accidental future unpin (or a drift
+          # off 0.22.2) fails loudly here instead of silently running a different
+          # scanner. `cargo audit --version` prints "cargo-audit-audit 0.22.2".
+          installed="$(cargo audit --version)"
+          echo "cargo-audit installed: $installed"
+          echo "$installed" | grep -qE '(^| )0\.22\.2($| )' || {
+            echo "::error::cargo-audit is not the pinned 0.22.2 (got: $installed)"
+            exit 1
+          }
+
+      # Hard-fail gate. Suppressions live in .cargo/audit.toml (read automatically
+      # from the repo root), each with no available upstream fix. A green check
+      # here means "no NEW advisories", not "advisory-clean": surface the active
+      # ignore list so a reviewer sees exactly what is being accepted.
+      - name: Show active audit ignores
+        run: |
+          {
+            echo '### cargo audit: accepted advisories (.cargo/audit.toml)'
+            echo '```toml'
+            sed -n '/^\[advisories\]/,$p' .cargo/audit.toml
+            echo '```'
+          } >> "$GITHUB_STEP_SUMMARY"
+
+      - name: cargo audit
+        run: cargo audit
+
+  msrv:
+    name: MSRV (Rust 1.91)
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Set up Rust 1.91
+        uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # 1.91
+        with:
+          toolchain: "1.91"
+
+      - name: Cache cargo
+        uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
+        with:
+          key: msrv
+
+      - name: cargo check on MSRV
+        run: cargo check --workspace --all-targets
+
+  docker-build:
+    name: Docker build smoke test
+    runs-on: ubuntu-latest
+    timeout-minutes: 30
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          persist-credentials: false
+
+      - name: Build image
+        run: docker build -t gitlawb-node:ci-test .
+
+      - name: Smoke test --version
+        run: docker run --rm gitlawb-node:ci-test --version

.github/workflows/pr-triage.yml

@@ -0,0 +1,124 @@
+name: PR Triage
+
+# Runs on pull_request_target, not pull_request: fork PRs get a read-only
+# GITHUB_TOKEN under pull_request regardless of the permissions below, so the
+# label/comment writes 403. This job never checks out or runs PR head code (it
+# only reads context.payload and the files API), so pull_request_target is safe.
+on:
+  pull_request_target:
+    types: [opened, edited, synchronize, reopened]
+
+permissions:
+  contents: read
+  pull-requests: write
+  issues: write
+
+concurrency:
+  group: pr-triage-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  triage:
+    name: Quality-signal triage
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    steps:
+      - name: Label and guide
+        uses: actions/github-script@f28e40c7f34bde8b3046d885e986cb6290c5673b # v7
+        with:
+          script: |
+            const pr = context.payload.pull_request;
+            const { owner, repo } = context.repo;
+            const prNumber = pr.number;
+
+            // Trusted authors bypass triage entirely.
+            const trusted = ["OWNER", "MEMBER", "COLLABORATOR"];
+            if (trusted.includes(pr.author_association)) {
+              core.info(`Author association ${pr.author_association} is trusted; skipping triage.`);
+              return;
+            }
+
+            // Labels this workflow owns. Anything here may be added or removed each run.
+            const MANAGED = ["needs-issue", "needs-description", "needs-tests", "workflow-change"];
+            const want = new Set();
+
+            const body = pr.body || "";
+
+            // Linked issue: look for "closes/fixes/resolves #N" or any bare #N reference.
+            const hasLinkedIssue =
+              /\b(close[sd]?|fix(e[sd])?|resolve[sd]?)\b[^\n]*#\d+/i.test(body) ||
+              /#\d+/.test(body);
+            if (!hasLinkedIssue) want.add("needs-issue");
+
+            // Description substance: strip HTML comments and markdown headings, then measure.
+            const stripped = body
+              .replace(/<!--[\s\S]*?-->/g, "")
+              .replace(/^#+.*$/gm, "")
+              .trim();
+            if (stripped.length < 50) want.add("needs-description");
+
+            // File-based signals.
+            const files = await github.paginate(github.rest.pulls.listFiles, {
+              owner, repo, pull_number: prNumber, per_page: 100,
+            });
+            const names = files.map(f => f.filename);
+
+            const isFork = pr.head.repo && pr.head.repo.full_name !== pr.base.repo.full_name;
+            const touchesWorkflows = names.some(n => n.startsWith(".github/workflows/"));
+            if (isFork && touchesWorkflows) want.add("workflow-change");
+
+            const changedRust = names.some(n => n.startsWith("crates/") && n.endsWith(".rs"));
+            // A test can live in a tests/ dir, a *_test.rs file, or (the common Rust
+            // pattern) an inline #[test] / #[cfg(test)] block added inside the source file.
+            const addsInlineTest = files.some(f =>
+              f.filename.endsWith(".rs") && f.patch &&
+              /^\+.*#\[(test\]|cfg\(test\))/m.test(f.patch));
+            const touchedTests =
+              names.some(n => n.includes("/tests/") || n.endsWith("_test.rs")) || addsInlineTest;
+            if (changedRust && !touchedTests) want.add("needs-tests");
+
+            // Reconcile labels: add wanted managed labels, remove managed labels no longer wanted.
+            const current = (await github.rest.issues.listLabelsOnIssue({
+              owner, repo, issue_number: prNumber,
+            })).data.map(l => l.name);
+
+            const toAdd = [...want].filter(l => !current.includes(l));
+            const toRemove = MANAGED.filter(l => current.includes(l) && !want.has(l));
+
+            if (toAdd.length) {
+              await github.rest.issues.addLabels({ owner, repo, issue_number: prNumber, labels: toAdd });
+            }
+            for (const name of toRemove) {
+              await github.rest.issues.removeLabel({ owner, repo, issue_number: prNumber, name })
+                .catch(() => {}); // ignore if already gone
+            }
+
+            // Guidance comment: only for advisory signals, and only once.
+            const advisory = ["needs-issue", "needs-description", "needs-tests"].filter(l => want.has(l));
+            if (!advisory.length) return;
+
+            const MARKER = "<!-- gitlawb-triage -->";
+            const comments = await github.paginate(github.rest.issues.listComments, {
+              owner, repo, issue_number: prNumber, per_page: 100,
+            });
+            if (comments.some(c => c.body && c.body.includes(MARKER))) {
+              core.info("Guidance comment already present; not reposting.");
+              return;
+            }
+
+            const reasons = {
+              "needs-issue": "Link the issue this addresses (`Closes #123`). For protocol changes, open an issue first.",
+              "needs-description": "Add a short summary of what changes and why: the template's Summary and Motivation sections.",
+              "needs-tests": "This changes Rust source but no tests changed. Tests are required for fixes and strongly encouraged for features.",
+            };
+            const lines = advisory.map(l => `- ${reasons[l]}`).join("\n");
+            const comment = [
+              MARKER,
+              "Thanks for the contribution. A couple of things will help us review this faster:",
+              "",
+              lines,
+              "",
+              "See [CONTRIBUTING.md](https://github.com/Gitlawb/node/blob/main/CONTRIBUTING.md). Update the PR and these notes will clear automatically.",
+            ].join("\n");
+
+            await github.rest.issues.createComment({ owner, repo, issue_number: prNumber, body: comment });

.github/workflows/release.yml

@@ -9,6 +9,9 @@ concurrency:
   group: release-${{ github.ref }}
   cancel-in-progress: false
 
+# Least privilege by default; every job opts in to exactly what it needs.
+permissions: {}
+
 jobs:
   release-please:
     if: ${{ github.repository == 'Gitlawb/node' }}
@@ -24,7 +27,7 @@ jobs:
     steps:
       - name: Run release-please
         id: release
-        uses: googleapis/release-please-action@16a9c90856f42705d54a6fda1823352bdc62cf38 # v4.3.0
+        uses: googleapis/release-please-action@45996ed1f6d02564a971a2fa1b5860e934307cf7 # v5.0.0
         with:
           token: ${{ secrets.GITHUB_TOKEN }}
 
@@ -41,6 +44,7 @@ jobs:
         uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ needs.release-please.outputs.tag_name }}
+          persist-credentials: false
 
       - name: Set up QEMU
         uses: docker/setup-qemu-action@29109295f81e9208d7d86ff1c6c12d2833863392 # v3.6.0
@@ -101,6 +105,9 @@ jobs:
     needs: release-please
     if: ${{ needs.release-please.outputs.release_created == 'true' }}
     runs-on: ${{ matrix.os }}
+    # Windows is best-effort: a failure there must not fail the job or block the
+    # downstream npm/Homebrew jobs that only consume the unix artifacts.
+    continue-on-error: ${{ startsWith(matrix.target, 'x86_64-pc-windows') }}
     permissions:
       contents: write
     strategy:
@@ -109,17 +116,24 @@ jobs:
         include:
           - target: x86_64-unknown-linux-musl
             os: ubuntu-latest
+          # Native arm64 runner: cross-compiling this target with the glibc
+          # toolchain broke aws-lc-sys, and native lets the smoke test run.
           - target: aarch64-unknown-linux-musl
-            os: ubuntu-latest
+            os: ubuntu-24.04-arm
+          # macos-13 (the last plain Intel image) is retired and queues forever;
+          # macos-15-intel is GitHub's supported Intel label.
           - target: x86_64-apple-darwin
-            os: macos-13
+            os: macos-15-intel
           - target: aarch64-apple-darwin
             os: macos-14
+          - target: x86_64-pc-windows-msvc
+            os: windows-latest
     steps:
       - name: Checkout release tag
         uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ needs.release-please.outputs.tag_name }}
+          persist-credentials: false
 
       - name: Set up Rust toolchain
         uses: dtolnay/rust-toolchain@b3b07ba8b418998c39fb20f53e8b695cdcc8de1b # stable
@@ -127,46 +141,422 @@ jobs:
           toolchain: stable
           targets: ${{ matrix.target }}
 
+      # Both musl targets build natively on a matching-arch runner, so the stock
+      # musl-gcc wrapper is all that's needed (no cross toolchain).
       - name: Install musl tools (linux)
         if: contains(matrix.target, 'linux-musl')
         run: |
           sudo apt-get update
           sudo apt-get install -y musl-tools
-          if [ "${{ matrix.target }}" = "aarch64-unknown-linux-musl" ]; then
-            sudo apt-get install -y gcc-aarch64-linux-gnu
-            echo "CARGO_TARGET_AARCH64_UNKNOWN_LINUX_MUSL_LINKER=aarch64-linux-gnu-gcc" >> "$GITHUB_ENV"
-            echo "CC_aarch64_unknown_linux_musl=aarch64-linux-gnu-gcc" >> "$GITHUB_ENV"
-          fi
 
       - name: Cache cargo
         uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
         with:
           key: ${{ matrix.target }}
 
-      - name: Build
-        run: cargo build --release --target ${{ matrix.target }} -p gl -p git-remote-gitlawb -p gitlawb-node
+      # The gitlawb-node daemon is a Linux/macOS service; on Windows we ship only
+      # the two CLI binaries. A Windows-only failure must not block the release.
+      - name: Determine binaries
+        shell: bash
+        run: |
+          BINS="gl git-remote-gitlawb gitlawb-node"
+          case "${{ matrix.target }}" in *windows*) BINS="gl git-remote-gitlawb" ;; esac
+          echo "BINS=$BINS" >> "$GITHUB_ENV"
 
-      - name: Package
-        id: pkg
+      - name: Build
         shell: bash
         run: |
           set -euo pipefail
-          NAME="gitlawb-node-${{ needs.release-please.outputs.version }}-${{ matrix.target }}"
+          args=""
+          for b in $BINS; do args="$args -p $b"; done
+          cargo build --release --target ${{ matrix.target }} $args
+
+      # Run each packaged binary's --version so a broken release artifact fails the
+      # build instead of shipping. Every target builds on a matching-arch runner,
+      # so all of them can execute here.
+      - name: Smoke test binaries
+        shell: bash
+        run: |
+          set -euo pipefail
+          VERSION="${{ needs.release-please.outputs.version }}"
+          BIN_DIR="target/${{ matrix.target }}/release"
+          EXE=""
+          case "${{ matrix.target }}" in *windows*) EXE=".exe" ;; esac
+          for bin in $BINS; do
+            echo "== $bin --version =="
+            out="$("$BIN_DIR/$bin$EXE" --version)"
+            echo "$out"
+            # Each binary prints "<name> <version>"; assert the released version is present.
+            grep -qF "$VERSION" <<<"$out" || {
+              echo "::error::$bin --version did not report expected version $VERSION (got: $out)"
+              exit 1
+            }
+          done
+
+      - name: Package
+        shell: bash
+        run: |
+          set -euo pipefail
+          TARGET="${{ matrix.target }}"
+          NAME="gitlawb-node-${{ needs.release-please.outputs.version }}-${TARGET}"
+          BIN_DIR="target/${TARGET}/release"
+          EXE=""
+          case "$TARGET" in *windows*) EXE=".exe" ;; esac
+
+          # Portable sha256 → "<hash>  <file>" so install scripts and brew can parse it.
+          sha256_file() {
+            local f="$1"
+            if command -v sha256sum >/dev/null 2>&1; then
+              sha256sum "$f"
+            elif command -v shasum >/dev/null 2>&1; then
+              shasum -a 256 "$f"
+            else
+              local h
+              h=$(certutil -hashfile "$f" SHA256 | sed -n 2p | tr -d ' \r')
+              printf '%s  %s\n' "$h" "$f"
+            fi
+          }
+
           mkdir -p "dist/$NAME"
-          cp "target/${{ matrix.target }}/release/gl" "dist/$NAME/"
-          cp "target/${{ matrix.target }}/release/git-remote-gitlawb" "dist/$NAME/"
-          cp "target/${{ matrix.target }}/release/gitlawb-node" "dist/$NAME/"
+          for bin in $BINS; do
+            cp "$BIN_DIR/$bin$EXE" "dist/$NAME/"
+          done
           cp README.md LICENSE-MIT LICENSE-APACHE "dist/$NAME/"
+
           cd dist
-          tar czf "$NAME.tar.gz" "$NAME"
-          shasum -a 256 "$NAME.tar.gz" > "$NAME.tar.gz.sha256"
-          echo "asset=dist/$NAME.tar.gz" >> "$GITHUB_OUTPUT"
-          echo "checksum=dist/$NAME.tar.gz.sha256" >> "$GITHUB_OUTPUT"
+          case "$TARGET" in
+            *windows*)
+              # 7z is preinstalled on windows-latest runners.
+              7z a -tzip "$NAME.zip" "$NAME" >/dev/null
+              sha256_file "$NAME.zip" > "$NAME.zip.sha256"
+              ;;
+            *)
+              tar czf "$NAME.tar.gz" "$NAME"
+              sha256_file "$NAME.tar.gz" > "$NAME.tar.gz.sha256"
+              ;;
+          esac
 
       - name: Attach to release
         uses: softprops/action-gh-release@72f2c25fcb47643c292f7107632f7a47c1df5cd8 # v2.3.2
         with:
           tag_name: ${{ needs.release-please.outputs.tag_name }}
           files: |
-            ${{ steps.pkg.outputs.asset }}
-            ${{ steps.pkg.outputs.checksum }}
+            dist/*.tar.gz
+            dist/*.zip
+            dist/*.sha256
+
+  npm-publish:
+    name: Publish to npm
+    needs: [release-please, release-binaries]
+    if: ${{ needs.release-please.outputs.release_created == 'true' }}
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      id-token: write # npm provenance
+    steps:
+      - name: Guard on secret
+        id: guard
+        env:
+          NPM_TOKEN: ${{ secrets.NPM_TOKEN }}
+        run: |
+          if [ -z "${NPM_TOKEN:-}" ]; then
+            echo "::warning::NPM_TOKEN is not set — skipping npm publish."
+            echo "enabled=false" >> "$GITHUB_OUTPUT"
+          else
+            echo "enabled=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Checkout release tag
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          ref: ${{ needs.release-please.outputs.tag_name }}
+          persist-credentials: false
+
+      - name: Lay in release binaries
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+          TAG: ${{ needs.release-please.outputs.tag_name }}
+        run: |
+          set -euo pipefail
+          # npm platform package -> Rust target triple (unix only; Windows is not
+          # published to npm).
+          MAP="
+          gl-darwin-arm64:aarch64-apple-darwin
+          gl-darwin-x64:x86_64-apple-darwin
+          gl-linux-arm64:aarch64-unknown-linux-musl
+          gl-linux-x64:x86_64-unknown-linux-musl
+          "
+          mkdir -p _dl
+          for entry in $MAP; do
+            pkg="${entry%%:*}"
+            target="${entry#*:}"
+            archive="gitlawb-node-${VERSION}-${target}.tar.gz"
+            echo "==> $pkg <- $archive"
+            gh release download "$TAG" --repo "$GITHUB_REPOSITORY" \
+              --pattern "$archive" --dir _dl --clobber
+            tar -xzf "_dl/$archive" -C _dl
+            src="_dl/gitlawb-node-${VERSION}-${target}"
+            cp "$src/gl" "npm/packages/$pkg/gl"
+            cp "$src/git-remote-gitlawb" "npm/packages/$pkg/git-remote-gitlawb"
+            chmod +x "npm/packages/$pkg/gl" "npm/packages/$pkg/git-remote-gitlawb"
+          done
+
+      - name: Set versions
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          VERSION: ${{ needs.release-please.outputs.version }}
+        run: |
+          set -euo pipefail
+          node -e '
+            const fs = require("fs");
+            const v = process.env.VERSION;
+            for (const p of fs.readdirSync("npm/packages")) {
+              const f = `npm/packages/${p}/package.json`;
+              const pkg = JSON.parse(fs.readFileSync(f, "utf8"));
+              pkg.version = v;
+              if (pkg.optionalDependencies) {
+                for (const k of Object.keys(pkg.optionalDependencies)) {
+                  pkg.optionalDependencies[k] = v;
+                }
+              }
+              fs.writeFileSync(f, JSON.stringify(pkg, null, 2) + "\n");
+            }
+          '
+
+      - name: Publish
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          NPM_TOKEN: ${{ secrets.NPM_TOKEN }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+        run: |
+          set -euo pipefail
+          echo "//registry.npmjs.org/:_authToken=${NPM_TOKEN}" > ~/.npmrc
+          # Platform packages first, then the wrapper (so its optionalDependencies resolve).
+          # Skip versions already on the registry so a rerun after a partial publish
+          # is idempotent instead of erroring on the first existing package.
+          for pkg in gl-darwin-arm64 gl-darwin-x64 gl-linux-arm64 gl-linux-x64 gl; do
+            name="@gitlawb/$pkg"
+            if npm view "$name@$VERSION" version >/dev/null 2>&1; then
+              echo "==> $name@$VERSION already published, skipping"
+              continue
+            fi
+            echo "==> npm publish $name@$VERSION"
+            npm publish "npm/packages/$pkg" --provenance --access public
+          done
+
+  homebrew-bump:
+    name: Bump Homebrew tap
+    needs: [release-please, release-binaries]
+    if: ${{ needs.release-please.outputs.release_created == 'true' }}
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read # GITHUB_TOKEN downloads release assets; the tap push uses HOMEBREW_TAP_PAT
+    steps:
+      - name: Guard on secret
+        id: guard
+        env:
+          HOMEBREW_TAP_PAT: ${{ secrets.HOMEBREW_TAP_PAT }}
+        run: |
+          if [ -z "${HOMEBREW_TAP_PAT:-}" ]; then
+            echo "::warning::HOMEBREW_TAP_PAT is not set — skipping Homebrew bump."
+            echo "enabled=false" >> "$GITHUB_OUTPUT"
+          else
+            echo "enabled=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Checkout tap repo
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          repository: Gitlawb/homebrew-tap
+          token: ${{ secrets.HOMEBREW_TAP_PAT }}
+          path: tap
+          persist-credentials: false
+
+      - name: Regenerate formula
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+          TAG: ${{ needs.release-please.outputs.tag_name }}
+        run: |
+          set -euo pipefail
+          base="https://github.com/${GITHUB_REPOSITORY}/releases/download/${TAG}"
+          mkdir -p _sums
+          gh release download "$TAG" --repo "$GITHUB_REPOSITORY" \
+            --pattern '*.tar.gz.sha256' --dir _sums --clobber
+          sha() { awk '{print $1}' "_sums/gitlawb-node-${VERSION}-$1.tar.gz.sha256"; }
+          SHA_MAC_ARM="$(sha aarch64-apple-darwin)"
+          SHA_MAC_X64="$(sha x86_64-apple-darwin)"
+          SHA_LNX_ARM="$(sha aarch64-unknown-linux-musl)"
+          SHA_LNX_X64="$(sha x86_64-unknown-linux-musl)"
+
+          mkdir -p tap/Formula
+          cat > tap/Formula/gl.rb <<EOF
+          class Gl < Formula
+            desc "Gitlawb CLI — decentralized git for AI agents and developers"
+            homepage "https://gitlawb.com"
+            version "${VERSION}"
+            license "MIT OR Apache-2.0"
+
+            on_macos do
+              on_arm do
+                url "${base}/gitlawb-node-${VERSION}-aarch64-apple-darwin.tar.gz"
+                sha256 "${SHA_MAC_ARM}"
+              end
+              on_intel do
+                url "${base}/gitlawb-node-${VERSION}-x86_64-apple-darwin.tar.gz"
+                sha256 "${SHA_MAC_X64}"
+              end
+            end
+
+            on_linux do
+              on_arm do
+                url "${base}/gitlawb-node-${VERSION}-aarch64-unknown-linux-musl.tar.gz"
+                sha256 "${SHA_LNX_ARM}"
+              end
+              on_intel do
+                url "${base}/gitlawb-node-${VERSION}-x86_64-unknown-linux-musl.tar.gz"
+                sha256 "${SHA_LNX_X64}"
+              end
+            end
+
+            def install
+              bin.install "gl"
+              bin.install "git-remote-gitlawb"
+            end
+
+            test do
+              assert_match version.to_s, shell_output("#{bin}/gl --version")
+            end
+          end
+          EOF
+
+      - name: Commit and push
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        working-directory: tap
+        env:
+          HOMEBREW_TAP_PAT: ${{ secrets.HOMEBREW_TAP_PAT }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+        run: |
+          set -euo pipefail
+          git config user.name "github-actions[bot]"
+          git config user.email "41898282+github-actions[bot]@users.noreply.github.com"
+          # Stage first so a brand-new (untracked) formula is detected by the no-op check.
+          git add Formula/gl.rb
+          if git diff --cached --quiet; then
+            echo "Formula already up to date."
+            exit 0
+          fi
+          git commit -m "gl ${VERSION}"
+          # Credentials are not persisted in .git/config; supply the token only for the push.
+          git push "https://x-access-token:${HOMEBREW_TAP_PAT}@github.com/Gitlawb/homebrew-tap.git" HEAD:main
+
+  web-sync:
+    name: Sync web (install scripts + version)
+    needs: [release-please, release-binaries]
+    if: ${{ needs.release-please.outputs.release_created == 'true' }}
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read # GITHUB_TOKEN checks out node; the web PR uses WEB_SYNC_PAT
+    steps:
+      - name: Guard on secret
+        id: guard
+        env:
+          WEB_SYNC_PAT: ${{ secrets.WEB_SYNC_PAT }}
+        run: |
+          if [ -z "${WEB_SYNC_PAT:-}" ]; then
+            echo "::warning::WEB_SYNC_PAT is not set — skipping web sync."
+            echo "enabled=false" >> "$GITHUB_OUTPUT"
+          else
+            echo "enabled=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Checkout node (release tag)
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          ref: ${{ needs.release-please.outputs.tag_name }}
+          path: node
+          persist-credentials: false
+
+      - name: Checkout web
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        with:
+          repository: Gitlawb/web
+          token: ${{ secrets.WEB_SYNC_PAT }}
+          path: web
+          persist-credentials: false
+
+      # web-sync publishes install.ps1 + version.json, so the Windows ZIP must exist.
+      # Windows is best-effort for npm/Homebrew (continue-on-error), so verify the
+      # asset is present before advertising a release the site can't actually serve.
+      - name: Verify website release assets
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+          TAG: ${{ needs.release-please.outputs.tag_name }}
+        run: |
+          set -euo pipefail
+          gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json assets \
+            --jq '.assets[].name' > /tmp/release-assets
+          for asset in \
+            "gitlawb-node-${VERSION}-x86_64-pc-windows-msvc.zip" \
+            "gitlawb-node-${VERSION}-x86_64-pc-windows-msvc.zip.sha256"; do
+            grep -Fxq "$asset" /tmp/release-assets || {
+              echo "::error::release asset missing: $asset (Windows build likely failed); not syncing web"
+              exit 1
+            }
+          done
+
+      - name: Sync and open PR
+        if: ${{ steps.guard.outputs.enabled == 'true' }}
+        env:
+          GH_TOKEN: ${{ secrets.WEB_SYNC_PAT }}
+          VERSION: ${{ needs.release-please.outputs.version }}
+          TAG: ${{ needs.release-please.outputs.tag_name }}
+        run: |
+          set -euo pipefail
+          # Canonical install scripts (source of truth lives in the node repo).
+          cp node/install.sh web/public/install.sh
+          cp node/install.ps1 web/public/install.ps1
+          # Single version source the site can read.
+          printf '{\n  "version": "%s",\n  "tag": "%s"\n}\n' "$VERSION" "$TAG" > web/public/version.json
+          # One-time, idempotent drift fixes: drop orphaned binaries, fix stale link.
+          rm -rf web/public/bin
+          if [ -f web/public/skill.md ]; then
+            sed -i 's#github.com/gitlawb/releases#github.com/Gitlawb/node/releases#g' web/public/skill.md
+          fi
+
+          cd web
+          # Stage first so brand-new (untracked) files are caught by the no-op check.
+          git add -A
+          if git diff --cached --quiet; then
+            echo "web already up to date."
+            exit 0
+          fi
+          branch="release-sync/${TAG}"
+          git config user.name "github-actions[bot]"
+          git config user.email "41898282+github-actions[bot]@users.noreply.github.com"
+          git checkout -b "$branch"
+          git commit -m "chore: sync gitlawb ${TAG} (install scripts + version)"
+          # Credentials are not persisted in .git/config; supply the token only for the push.
+          git push --force "https://x-access-token:${GH_TOKEN}@github.com/Gitlawb/web.git" "HEAD:$branch"
+          gh pr create --repo Gitlawb/web --head "$branch" \
+            --title "Sync gitlawb ${TAG}" \
+            --body "Automated sync from Gitlawb/node ${TAG}: install.sh, install.ps1, public/version.json, and one-time drift fixes (removed orphaned public/bin, fixed skill.md releases link). Review and merge to deploy via Vercel." \
+            || {
+              # Only swallow the "PR already exists" case; surface auth/API failures
+              # (a failed gh pr list must not be misread as "PR exists").
+              pr_count="$(gh pr list --repo Gitlawb/web --head "$branch" --state open --json number --jq 'length')" || exit 1
+              if [ "$pr_count" != "0" ]; then
+                echo "PR for $branch already exists; branch was updated."
+              else
+                exit 1
+              fi
+            }

.github/workflows/stale.yml

@@ -0,0 +1,40 @@
+name: Stale PRs
+
+on:
+  schedule:
+    - cron: "30 1 * * *"  # daily at 01:30 UTC
+  workflow_dispatch:
+
+permissions:
+  contents: read
+  pull-requests: write
+  issues: write
+
+jobs:
+  stale:
+    name: Flag and close ignored PRs
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    steps:
+      - uses: actions/stale@5bef64f19d7facfb25b37b414482c7164d639639 # v9
+        with:
+          days-before-stale: 14
+          days-before-close: 7
+          # Act on PRs only; never on issues.
+          days-before-issue-stale: -1
+          days-before-issue-close: -1
+          # Only PRs the triage step flagged as missing a real description.
+          # needs-issue is advisory-only (linking an issue is a SHOULD, and many
+          # legitimate small PRs have none) so it does not drive auto-close.
+          only-pr-labels: "needs-description"
+          stale-pr-label: "stale"
+          exempt-pr-labels: "workflow-change,security,pinned"
+          remove-stale-when-updated: true
+          stale-pr-message: >
+            This PR has been inactive for 14 days and is still missing a description.
+            It will be closed in 7 days if there's no update. Push a change or leave a
+            comment to keep it open. No hard feelings, you can reopen anytime.
+          close-pr-message: >
+            Closing due to inactivity. Reopen whenever you're ready to update it. See
+            CONTRIBUTING.md for what helps us review quickly.
+          ascending: true

.gitignore

@@ -1,6 +1,7 @@
 /target
 **/*.rs.bk
 Cargo.lock.bak
+dist/
 
 # Local node data
 /data
@@ -21,3 +22,7 @@ keys/
 
 # Logs
 *.log
+.openclaude-profile.json
+
+# Per-operator Fly config (node1 prod config is pulled from Fly, not tracked)
+infra/fly/node1.fly.toml

.release-please-manifest.json

@@ -1,3 +1,3 @@
 {
-  ".": "0.3.8"
+  ".": "0.5.1"
 }

CHANGELOG.md

@@ -0,0 +1,86 @@
+# Changelog
+
+## [0.5.1](https://github.com/Gitlawb/node/compare/v0.5.0...v0.5.1) (2026-07-10)
+
+
+### Bug Fixes
+
+* **bounties:** add tests for claim_bounty repo-read gate ([#160](https://github.com/Gitlawb/node/issues/160)) ([#169](https://github.com/Gitlawb/node/issues/169)) ([6bafaa6](https://github.com/Gitlawb/node/commit/6bafaa6dc5f05c0dcd61c708397afddbcf8c2e3f))
+* **deps:** bump crossbeam-epoch to 0.9.20 for RUSTSEC-2026-0204 ([#162](https://github.com/Gitlawb/node/issues/162)) ([#163](https://github.com/Gitlawb/node/issues/163)) ([67ad2b8](https://github.com/Gitlawb/node/commit/67ad2b876c8d9a336219d1016968de7a88fc4e75))
+* **node,git:** bound a hung served git with a total-duration timeout ([#62](https://github.com/Gitlawb/node/issues/62)) ([#165](https://github.com/Gitlawb/node/issues/165)) ([cd67718](https://github.com/Gitlawb/node/commit/cd67718f49ec38726a40f6bcf36f539ccdb42969))
+* **node:** bound list_ref_certificates with LIMIT and add upsert to prevent unbounded growth ([#147](https://github.com/Gitlawb/node/issues/147)) ([#149](https://github.com/Gitlawb/node/issues/149)) ([6b5e5bc](https://github.com/Gitlawb/node/commit/6b5e5bc7aee00a2d03295d3620df1ee4d8c024a2))
+* **node:** gate POST /api/v1/sync/trigger and rate-limit the peer-sync routes ([#82](https://github.com/Gitlawb/node/issues/82)) ([#161](https://github.com/Gitlawb/node/issues/161)) ([d00d89a](https://github.com/Gitlawb/node/commit/d00d89ae5be992d1f63e95b714ae1bd3735e8457))
+* **node:** rate-limit repo/agent creation per client IP to stop DID-farm spam floods ([#180](https://github.com/Gitlawb/node/issues/180)) ([dfcaa22](https://github.com/Gitlawb/node/commit/dfcaa22b23ec91be4c75926956aa994ca89de8d5))
+* **release:** build aarch64-musl natively on arm64 runners, replace retired macos-13 ([#155](https://github.com/Gitlawb/node/issues/155)) ([6cff528](https://github.com/Gitlawb/node/commit/6cff5286b436fdee44ad881999e2a5f4bdba18f9))
+* **visibility:** gate repo-scoped read surfaces on visibility ([#120](https://github.com/Gitlawb/node/issues/120)) ([#157](https://github.com/Gitlawb/node/issues/157)) ([26bc3f6](https://github.com/Gitlawb/node/commit/26bc3f69870aa77e43c0d92115a5aa59555b7d88))
+
+## [0.5.0](https://github.com/Gitlawb/node/compare/v0.4.0...v0.5.0) (2026-07-05)
+
+
+### Features
+
+* **gl:** sanctioned iCaptcha client flow + secure git lifecycle ([#138](https://github.com/Gitlawb/node/issues/138)) ([06388ec](https://github.com/Gitlawb/node/commit/06388ec26aa29d356ae311276fdb91be054e9ecc))
+
+
+### Bug Fixes
+
+* **gl:** sign the CLI's /ipfs/pins reads under the [#134](https://github.com/Gitlawb/node/issues/134) auth gate ([#146](https://github.com/Gitlawb/node/issues/146)) ([20d6848](https://github.com/Gitlawb/node/commit/20d6848846b3a988d604208833167a528b7d8820))
+* **node,git-remote:** gate receive-pack advertisement, sign client fetch/push ([#119](https://github.com/Gitlawb/node/issues/119)) ([6f36fc0](https://github.com/Gitlawb/node/commit/6f36fc07b8e10a650c5948b269feac1cb25cae2a))
+* **node,gossip:** route gossip HTTP through the no-redirect client ([#93](https://github.com/Gitlawb/node/issues/93)) ([#140](https://github.com/Gitlawb/node/issues/140)) ([563c456](https://github.com/Gitlawb/node/commit/563c456803bf3e958d63869db424b3940472bc3d))
+* **node:** close two spam-vector root causes (trust upsert + ungated push) ([#152](https://github.com/Gitlawb/node/issues/152)) ([2df6ff9](https://github.com/Gitlawb/node/commit/2df6ff9d30de62f754fa41473e85db316021718e))
+* **node:** gate GET /ipfs/{cid} on reachable allowed-set, not deny-set ([#126](https://github.com/Gitlawb/node/issues/126)) ([#133](https://github.com/Gitlawb/node/issues/133)) ([466a550](https://github.com/Gitlawb/node/commit/466a550915edd711856ef32035f9f474e2577c4f))
+* **node:** gate the ref-updates feeds on read visibility ([#112](https://github.com/Gitlawb/node/issues/112), [#114](https://github.com/Gitlawb/node/issues/114)) ([#143](https://github.com/Gitlawb/node/issues/143)) ([4891db3](https://github.com/Gitlawb/node/commit/4891db38892663326ee0c1417a2db931988be4b5))
+* **node:** prefer canonical repo row over mirror row in get_repo ([#124](https://github.com/Gitlawb/node/issues/124)) ([#141](https://github.com/Gitlawb/node/issues/141)) ([6c95592](https://github.com/Gitlawb/node/commit/6c95592d188222ac3446dc23ef8d9befbf82ad6f))
+* **remote:** include HTTP error response body ([#137](https://github.com/Gitlawb/node/issues/137)) ([09a0cb2](https://github.com/Gitlawb/node/commit/09a0cb23b9f284ccbd69aca6958b70671f3bfb46))
+* **repos:** log the cause when repo create fails ([#103](https://github.com/Gitlawb/node/issues/103)) ([2620e97](https://github.com/Gitlawb/node/commit/2620e973e3cd4835ed42ddd4adcd8183b5b3080e))
+
+## [0.4.0](https://github.com/Gitlawb/node/compare/v0.3.9...v0.4.0) (2026-06-30)
+
+
+### Features
+
+* agent profiles (display name, bio, avatar, social links) ([#23](https://github.com/Gitlawb/node/issues/23)) ([09a3397](https://github.com/Gitlawb/node/commit/09a339745eca40a2567d911e947e3fc7426fc621))
+* **db:** versioned schema migrations with idempotent backfill ([#21](https://github.com/Gitlawb/node/issues/21)) ([927e4d0](https://github.com/Gitlawb/node/commit/927e4d0cfb4ea11dca6930780939afaa067797ba))
+* encrypted replication for private subtrees (B1/B2/B3) for [#18](https://github.com/Gitlawb/node/issues/18) ([#36](https://github.com/Gitlawb/node/issues/36)) ([5ff7af8](https://github.com/Gitlawb/node/commit/5ff7af84fa21fab53a12dfa04a0e7fb7e7d672e6))
+* **git-remote-gitlawb:** add --version and --help flags ([#30](https://github.com/Gitlawb/node/issues/30)) ([3a401eb](https://github.com/Gitlawb/node/commit/3a401eb0792f9c5f5a10de6c16861655ab3836e0))
+* **gitlawb-attest:** External Attestation v1 for ref-update certs ([#20](https://github.com/Gitlawb/node/issues/20)) ([924bccd](https://github.com/Gitlawb/node/commit/924bccd8e53e9be2dc9d6d4e4f1376952d6462bb))
+* **node:** blind recipient identities at rest and gate B1 by repo readability ([#40](https://github.com/Gitlawb/node/issues/40)) ([abdc775](https://github.com/Gitlawb/node/commit/abdc7757708d2bbb2bfda99bb65d50756142a42e))
+* **node:** enforce per-route authorization across the REST and GraphQL surface ([#87](https://github.com/Gitlawb/node/issues/87)) ([2202b00](https://github.com/Gitlawb/node/commit/2202b0097fab6976ab366a2cdc385f1146a72f86))
+* **node:** graceful shutdown + Prometheus metrics endpoint ([#22](https://github.com/Gitlawb/node/issues/22)) ([2ce4da9](https://github.com/Gitlawb/node/commit/2ce4da9cc5a4791e8ae5a1cd90270b67f60d9ec3))
+* **node:** iCaptcha proof-of-intelligence gate on create_repo + register ([#108](https://github.com/Gitlawb/node/issues/108)) ([adc20f9](https://github.com/Gitlawb/node/commit/adc20f9effad7b42fab55002875d209c4ed79518))
+* **node:** iCaptcha-aware repo propagation gate with quarantine ([#125](https://github.com/Gitlawb/node/issues/125)) ([8b9ceec](https://github.com/Gitlawb/node/commit/8b9ceec25ef338965d1db72d39a7f2adb5300cc9))
+* **node:** owner-only push enforcement behind GITLAWB_ENFORCE_OWNER_PUSH ([#31](https://github.com/Gitlawb/node/issues/31)) ([#68](https://github.com/Gitlawb/node/issues/68)) ([0a15e76](https://github.com/Gitlawb/node/commit/0a15e763d2ab46737a3831715facbe51045b33ba))
+* **node:** peer partial-mirrors for repos with private subtrees ([#35](https://github.com/Gitlawb/node/issues/35)) ([e365a57](https://github.com/Gitlawb/node/commit/e365a57b51c167abf06e87bfeb0565c80ed1b849))
+* **node:** pin the per-push object delta instead of re-enumerating the whole repo ([#90](https://github.com/Gitlawb/node/issues/90)) ([1af4fdf](https://github.com/Gitlawb/node/commit/1af4fdf485c7084cd160551b757b1ad1eed65cc6))
+* **node:** replication enforcement (Phase 2) for [#18](https://github.com/Gitlawb/node/issues/18) ([#34](https://github.com/Gitlawb/node/issues/34)) ([8680d0f](https://github.com/Gitlawb/node/commit/8680d0f9d6600bba1a52d15624f8a2802a169511))
+* **node:** signature-gated agent self-deregister ([#29](https://github.com/Gitlawb/node/issues/29)) ([#63](https://github.com/Gitlawb/node/issues/63)) ([ff492b4](https://github.com/Gitlawb/node/commit/ff492b452126f5568dac4286a7249f0cadb8b380))
+* **node:** subtree content withholding (Phase 3) for [#18](https://github.com/Gitlawb/node/issues/18) ([#28](https://github.com/Gitlawb/node/issues/28)) ([61b3830](https://github.com/Gitlawb/node/commit/61b383019fd895a1a6adfad934ad6c626e0f095e))
+* path-scoped repository visibility (Phase 1) for [#18](https://github.com/Gitlawb/node/issues/18) ([#25](https://github.com/Gitlawb/node/issues/25)) ([6abaf1d](https://github.com/Gitlawb/node/commit/6abaf1d7ed8fc55c6547568ae7247131311bde98))
+* per-DID rate limiting on creation endpoints (10/hour) ([#13](https://github.com/Gitlawb/node/issues/13)) ([b12c6bc](https://github.com/Gitlawb/node/commit/b12c6bc3283c2647224a62fb520a3cb7acf4a747))
+* **sync:** auto-register as replica with origin after successful mirror ([#56](https://github.com/Gitlawb/node/issues/56)) ([c03c9af](https://github.com/Gitlawb/node/commit/c03c9af8fadafe262a2bf3cf25e19edf7160d376))
+
+
+### Bug Fixes
+
+* **api:** blob endpoint returns 400/404 instead of 500 on bad paths ([#37](https://github.com/Gitlawb/node/issues/37)) ([b61a1bd](https://github.com/Gitlawb/node/commit/b61a1bd46ffe78b39c0967e97b0ad349eba0b046))
+* **core:** route seed access through the zeroizing wrapper ([#41](https://github.com/Gitlawb/node/issues/41)) ([#64](https://github.com/Gitlawb/node/issues/64)) ([c9f43b0](https://github.com/Gitlawb/node/commit/c9f43b010576edb3c92a3be3d935cad232250344))
+* **core:** zeroize the derived X25519 secret ([#65](https://github.com/Gitlawb/node/issues/65)) ([#91](https://github.com/Gitlawb/node/issues/91)) ([2f6611a](https://github.com/Gitlawb/node/commit/2f6611a30fbb66cef9991cf4c6e507548acc5038))
+* **gl:** paginate gl-clone Arweave recovery and make /encrypted-blobs parsing schema-strict ([#49](https://github.com/Gitlawb/node/issues/49)) ([#70](https://github.com/Gitlawb/node/issues/70)) ([2153b0b](https://github.com/Gitlawb/node/commit/2153b0b7a67a48c29a33cd70b80cfbb69760805d))
+* **infra:** drop fly idle_timeout 600 -> 120 ([#38](https://github.com/Gitlawb/node/issues/38)) ([a2217bf](https://github.com/Gitlawb/node/commit/a2217bff27ff3d6cae02bd8a12f8a0af7ce2b0a1))
+* **node:** anchor the real old_sha and issue a per-ref certificate ([#72](https://github.com/Gitlawb/node/issues/72)) ([6809201](https://github.com/Gitlawb/node/commit/6809201daa223d6f833be6e95876a7b4e1f2b0b5))
+* **node:** close under-withholding via full ref scope and full-history classification ([#42](https://github.com/Gitlawb/node/issues/42)) ([#84](https://github.com/Gitlawb/node/issues/84)) ([3e1e904](https://github.com/Gitlawb/node/commit/3e1e9045e4e3aa5ea0aee69767ceb01637920d2a))
+* **node:** dedupe mirror and canonical repo rows on list surfaces ([#6](https://github.com/Gitlawb/node/issues/6)) ([#73](https://github.com/Gitlawb/node/issues/73)) ([3e8e333](https://github.com/Gitlawb/node/commit/3e8e333aa03d7a2fe455d5d83f23089d58feb8c9))
+* **node:** enforce path-scoped visibility on the REST read API ([#52](https://github.com/Gitlawb/node/issues/52)) ([e37ea7f](https://github.com/Gitlawb/node/commit/e37ea7fec6d5a3171b526c84f884670bbbd258fb))
+* **node:** fail closed when a recipient DID can't be resolved ([#47](https://github.com/Gitlawb/node/issues/47)) ([#67](https://github.com/Gitlawb/node/issues/67)) ([abc9ad0](https://github.com/Gitlawb/node/commit/abc9ad03acb48e608234650a25049622673fa53a))
+* **node:** gate fork_repo on per-caller path-scoped visibility ([#98](https://github.com/Gitlawb/node/issues/98)) ([#109](https://github.com/Gitlawb/node/issues/109)) ([6ae316c](https://github.com/Gitlawb/node/commit/6ae316cc88521747cbacb2a612b9433897d2e490))
+* **node:** gate GET /ipfs/{cid} on per-caller path-scoped visibility ([#110](https://github.com/Gitlawb/node/issues/110)) ([#128](https://github.com/Gitlawb/node/issues/128)) ([174f25a](https://github.com/Gitlawb/node/commit/174f25a206380b26796b8782e1bd860b0a409fc9))
+* **node:** gate repo-listing and stats surfaces on visibility ([#97](https://github.com/Gitlawb/node/issues/97), [#99](https://github.com/Gitlawb/node/issues/99), [#101](https://github.com/Gitlawb/node/issues/101), [#104](https://github.com/Gitlawb/node/issues/104)) ([#111](https://github.com/Gitlawb/node/issues/111)) ([828dd27](https://github.com/Gitlawb/node/commit/828dd279a286f58bbb3c73627b2a1e23778b25cf))
+* **node:** make Tigris repo hydration resilient to corrupt archives & failed writes ([#54](https://github.com/Gitlawb/node/issues/54)) ([7a99d0f](https://github.com/Gitlawb/node/commit/7a99d0f27cfa869e9f8a803f16cff30191745a51))
+* **node:** preserve promisor mirror mode on unknown withheld-paths lookup ([#48](https://github.com/Gitlawb/node/issues/48)) ([#69](https://github.com/Gitlawb/node/issues/69)) ([96fcfdb](https://github.com/Gitlawb/node/commit/96fcfdb1ca6d4cd27226670068702c9f177e283a))
+* **node:** reap leaked git child processes ([#53](https://github.com/Gitlawb/node/issues/53)) ([#61](https://github.com/Gitlawb/node/issues/61)) ([803d83e](https://github.com/Gitlawb/node/commit/803d83efdbcfa9d98affac1c5aaf8aacc511ae64))
+* **node:** reject malformed path globs with non-trailing or empty-segment wildcards ([#74](https://github.com/Gitlawb/node/issues/74)) ([#75](https://github.com/Gitlawb/node/issues/75)) ([3d880cd](https://github.com/Gitlawb/node/commit/3d880cd56fed10e4c5ae787b52ce411384950f5e))
+* **node:** skip withheld-walk when no path-scoped rule can withhold ([#60](https://github.com/Gitlawb/node/issues/60)) ([338ff83](https://github.com/Gitlawb/node/commit/338ff83584f2ab960be7e42ecec64191f5aaeb95))
+* **release:** give crates explicit versions for release-please ([#129](https://github.com/Gitlawb/node/issues/129)) ([788a868](https://github.com/Gitlawb/node/commit/788a8686c1deafe03573703d72eb927cde81f54d))
+* **release:** use simple release-type + generic Cargo.toml updaters ([#130](https://github.com/Gitlawb/node/issues/130)) ([12bfb1b](https://github.com/Gitlawb/node/commit/12bfb1b3c86b38f0b22d488cd6e85dfd96e0c37f))
+* **security:** gate webhook creation through the public-host validator ([#81](https://github.com/Gitlawb/node/issues/81)) ([#92](https://github.com/Gitlawb/node/issues/92)) ([f28fa02](https://github.com/Gitlawb/node/commit/f28fa02236bd65c6a4fb690131ab14640cc53a12))
+* **security:** reject non-public peer URLs + prune poisoned peers ([#78](https://github.com/Gitlawb/node/issues/78)) ([a8cc33a](https://github.com/Gitlawb/node/commit/a8cc33a185f2649d3fe100ec271ee5739a55eba7))

CONTRIBUTING.md

@@ -55,10 +55,29 @@ Smart contracts live in a separate repo: [github.com/Gitlawb/contracts](https://
 4. **Conventional commits.** Use `feat:`, `fix:`, `docs:`, `refactor:`, `test:`, `chore:`. Releases are automated by [release-please](https://github.com/googleapis/release-please) — your commit prefixes drive the next version bump.
 5. **Format and lint.** Run `cargo fmt --all` and `cargo clippy --workspace --all-targets -- -D warnings` before submitting. CI will reject anything that fails these.
 
+## What gets merged, what gets closed
+
+We welcome contributions from humans and agents alike. To keep review sustainable, PRs are
+expected to clear a basic quality bar:
+
+- **Link an issue.** Bug fixes and features should reference an issue (`Closes #123`). For
+  protocol-level changes (identity, signatures, UCAN, ref certs, wire formats), open the
+  issue *before* writing code.
+- **One change per PR.** Unrelated churn slows review and gets sent back.
+- **Tests and a green pipeline.** New behavior needs tests; `cargo fmt`, `cargo clippy`,
+  and the full CI suite must pass.
+- **A real description.** Say what changes and why. "Update code" is not a description.
+
+A triage bot labels PRs that are missing these and leaves a short note. Nothing is closed
+automatically while you're engaging. A flagged PR still missing a description after 14 days of
+inactivity gets a stale warning, and is closed 7 days later if still untouched. A missing issue
+link alone never triggers closure; that label stays advisory. Closed PRs can be reopened at any
+time once updated.
+
 ## Development environment
 
 **Requirements:**
-- Rust stable (≥ 1.85) — install via [rustup](https://rustup.rs)
+- Rust stable (≥ 1.91) — install via [rustup](https://rustup.rs)
 - PostgreSQL — required for the node. Use the bundled `docker-compose.yml` for local dev.
 - Docker (optional, for full-stack local testing)
 

Cargo.toml

@@ -5,11 +5,20 @@ members = [
     "crates/gitlawb-node",
     "crates/gl",
     "crates/git-remote-gitlawb",
+    "crates/gitlawb-attest",
+    "crates/icaptcha-client",
 ]
 
 [workspace.package]
-version = "0.3.8"
+# Per-crate versions live in each crate's [package] so release-please can manage
+# them (it cannot rewrite an inherited `version.workspace = true`). They are kept
+# in lockstep by release-please's generic updater: each crate's `version` line
+# carries an `# x-release-please-version` annotation and is listed under
+# `extra-files` in release-please-config.json. The release type is `simple`
+# (not `rust`) because the rust strategy unconditionally tries to rewrite this
+# virtual workspace root as a package manifest and errors out.
 edition = "2021"
+rust-version = "1.91"
 license = "MIT OR Apache-2.0"
 authors = ["gitlawb contributors"]
 repository = "https://github.com/gitlawb/node"
@@ -20,12 +29,13 @@ tokio = { version = "1", features = ["full"] }
 # serialization
 serde = { version = "1", features = ["derive"] }
 serde_json = "1"
+serde_jcs = "0.2"
 # errors
 thiserror = "2"
 anyhow = "1"
 # crypto
 ed25519-dalek = { version = "2", features = ["rand_core", "pkcs8", "pem"] }
-rand = "0.8"
+rand = "0.8.6"
 sha2 = "0.10"
 # encoding
 hex = "0.4.3"
@@ -45,3 +55,7 @@ uuid = { version = "1", features = ["v4"] }
 reqwest = { version = "0.12", features = ["blocking", "json", "multipart", "rustls-tls"], default-features = false }
 # HMAC
 hmac = "0.12"
+
+[profile.release]
+lto = "thin"
+strip = "symbols"

Dockerfile

@@ -28,6 +28,7 @@ RUN mkdir -p crates/gitlawb-core/src crates/gitlawb-node/src crates/gl/src crate
 # cargo can keep the dummy `fn main() {}` binaries from the cache layer above
 # and the runtime container exits immediately with code 0.
 COPY crates/ crates/
+COPY bootstrap-peers.json ./
 RUN find crates -name "*.rs" -exec touch {} + && \
     rm -f target/release/gitlawb-node target/release/gl target/release/git-remote-gitlawb && \
     rm -rf target/release/.fingerprint/gitlawb-node-* \
@@ -43,6 +44,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         git \
         ca-certificates \
         curl \
+        tini \
     && rm -rf /var/lib/apt/lists/*
 
 # Non-root user for runtime
@@ -64,11 +66,18 @@ ENV GITLAWB_REPOS_DIR=/data/repos \
     GITLAWB_PORT=7545 \
     GITLAWB_P2P_PORT=7546
 
-EXPOSE 7545 7546
+EXPOSE 7545 7546/udp
 
 VOLUME ["/data"]
 
 HEALTHCHECK --interval=30s --timeout=5s --start-period=15s --retries=3 \
     CMD curl -fsS http://127.0.0.1:${GITLAWB_PORT}/health || exit 1
 
-ENTRYPOINT ["gitlawb-node"]
+# Run under tini so the node is never PID 1. As PID 1 a process must reap
+# reparented orphans itself; the node does not, so git's reparented grandchildren
+# (e.g. pack-objects orphaned when a served upload-pack dies on a client
+# disconnect) would accumulate as zombies until fork() fails with EAGAIN (#53).
+# tini reaps them and forwards SIGTERM/SIGINT to the node, which runs its own
+# graceful shutdown. (No `-g`: the node manages its own children, so group-wide
+# signalling would only disturb in-flight git helpers during shutdown.)
+ENTRYPOINT ["tini", "--", "gitlawb-node"]

README.md

@@ -1,49 +1,321 @@
-# gitlawb node
+# Gitlawb Node
 
-**Decentralized git for AI agents and developers.** Run your own node, host repos under your own DID, and connect to the gitlawb network.
+**Decentralized git infrastructure for developers, AI agents, and app delivery.**
 
-This repository contains the open-source node software:
+Gitlawb Node is the open-source node software behind the Gitlawb network. It lets anyone run a self-hosted node, publish repositories under a DID, sign writes with Ed25519 HTTP signatures, replicate git activity across peers, and move toward a resilient app-delivery network where code and build assets can be served closer to users.
 
-- `gitlawb-node` — Axum HTTP server, git smart-HTTP, libp2p gossip, optional S3-compatible storage
-- `gl` — CLI for identity, repos, PRs, MCP server
-- `git-remote-gitlawb` — `git remote helper` for `gitlawb://` URLs
-- `gitlawb-core` — shared crypto primitives (DID, CID, HTTP signatures, UCAN)
+Gitlawb is not trying to be only “another git host.” The long-term direction is:
+
+```txt
+Decentralized GitHub
++ signed agent-native workflows
++ resilient repo replication
++ CDN-style app/code delivery
+```
+
+The mission is simple: once code is pushed to the network, it should not disappear because one server went down.
 
 ---
 
-## Quickstart
+## What is in this repository?
 
-The fastest way to run a node is via Docker. You'll get a node + Postgres locally with one command.
+This is a Rust workspace with four crates:
+
+| Crate | Purpose |
+|---|---|
+| `gitlawb-node` | The node daemon: Axum HTTP server, git smart-HTTP, Postgres metadata, libp2p gossip, optional S3/Tigris/IPFS/Arweave/Base PoS hooks. |
+| `gl` | The Gitlawb CLI for identity, repos, issues, PRs, bounties, tasks, peers, node status, MCP, and setup flows. |
+| `git-remote-gitlawb` | Git remote helper for `gitlawb://` URLs, so normal `git clone`, `git fetch`, and `git push` can talk to Gitlawb nodes. |
+| `gitlawb-core` | Shared primitives: Ed25519 identities, `did:key`, CIDs, RFC 9421 HTTP signatures, certificates, and UCAN tokens. |
+
+---
+
+## Why Gitlawb Nodes?
+
+Most git hosting today depends on a small number of centralized platforms. Gitlawb Nodes are designed for a different model:
+
+- **Own your identity** — every user, agent, and node is an Ed25519 keypair represented as `did:key:z6Mk...`.
+- **Signed writes by default** — write requests use RFC 9421 HTTP Signatures instead of passwords.
+- **Git-native transport** — repositories are still real git repositories served over smart HTTP.
+- **Agent-native workflows** — the `gl` CLI and MCP server expose repo, issue, task, PR, and UCAN flows to AI agents.
+- **Peer-aware delivery** — nodes can announce, discover, gossip, and sync with each other.
+- **App CDN direction** — the network can evolve from decentralized code storage into code + asset + app delivery.
+
+---
+
+## Current status
+
+Gitlawb Node is live early infrastructure. It is useful today, but some security and reliability features are intentionally staged for compatibility with existing nodes.
+
+Good today:
+
+- Local or Docker node startup.
+- Postgres-backed repo metadata.
+- Bare git repository storage.
+- Git smart-HTTP clone/fetch/push.
+- RFC 9421-signed writes.
+- DID identities.
+- `gl` CLI workflows.
+- libp2p peer discovery/gossip foundation.
+- Optional Tigris/S3 storage.
+- Optional IPFS/Pinata and Arweave/Irys hooks.
+- Optional Base node-operator staking/heartbeat hooks.
+
+Known limitations:
+
+- Private repository read enforcement is not wired yet. Treat public nodes as public infrastructure unless you restrict access at your proxy/firewall.
+- UCAN chain validation and revocation are not complete.
+- Repository write authorization is not capability-complete yet; HTTP signatures prove identity, not full authorization policy.
+- Peer writes are signed by upgraded nodes, but strict signed-peer enforcement is opt-in during rolling upgrades.
+- GraphQL mutations need mutation-aware auth before becoming a public write surface.
+
+See:
+
+- [`SECURITY.md`](SECURITY.md)
+- [`docs/OSS-READINESS-AUDIT.md`](docs/OSS-READINESS-AUDIT.md)
+- [`docs/MAINTAINER-ROADMAP.md`](docs/MAINTAINER-ROADMAP.md)
+
+---
+
+## Quickstart: run a local node
+
+The fastest path is Docker Compose. It starts a node and Postgres.
 
 ```bash
-git clone https://github.com/gitlawb/node.git
+git clone https://github.com/Gitlawb/node.git
 cd node
 cp .env.example .env
 docker compose up -d
 ```
 
-Your node is now serving:
+Your local node will serve:
 
-- HTTP + git smart-HTTP on `:7545`
-- libp2p gossip on `:7546`
+| Service | Default |
+|---|---|
+| HTTP API + git smart-HTTP | `http://localhost:7545` |
+| libp2p QUIC/UDP | `7546` |
+| Postgres | compose-managed |
 
 Verify:
 
 ```bash
 curl http://localhost:7545/health
+curl http://localhost:7545/api/v1/stats
+```
+
+Expected health response:
+
+```json
+{ "status": "ok" }
+```
+
+Stop it:
+
+```bash
+docker compose down
 ```
 
 ---
 
-## How it works
+## Install the CLI
 
-- **Identity** — every actor (human or agent) is an Ed25519 keypair → `did:key:z6Mk...`. No accounts, no passwords.
-- **Auth** — every write is signed via HTTP Signatures (RFC 9421).
-- **Delegation** — UCAN capability tokens.
-- **Storage** — local disk + optional S3-compatible bucket (Tigris, MinIO, AWS S3).
-- **Networking** — libp2p Gossipsub for ref-update events, Kademlia DHT for node discovery.
+```bash
+# npm (macOS / Linux)
+npm install -g @gitlawb/gl
 
-The node is **stateless beyond Postgres + the repos directory.** You can scale horizontally by pointing multiple nodes at a shared S3 bucket and database.
+# Homebrew (macOS / Linux)
+brew install gitlawb/tap/gl
+
+# curl (macOS / Linux)
+curl -fsSL https://gitlawb.com/install.sh | sh
+
+# PowerShell (Windows)
+irm https://gitlawb.com/install.ps1 | iex
+```
+
+Or build from source:
+
+```bash
+cargo build --release -p gl -p git-remote-gitlawb -p gitlawb-node
+```
+
+Put these binaries on your `PATH`:
+
+```txt
+target/release/gl
+target/release/git-remote-gitlawb
+target/release/gitlawb-node
+```
+
+Check your setup:
+
+```bash
+gl doctor
+```
+
+---
+
+## First repo flow
+
+Create an identity:
+
+```bash
+gl identity new
+gl identity show
+```
+
+Register against your local node:
+
+```bash
+gl register --node http://localhost:7545
+```
+
+Create a repo:
+
+```bash
+gl repo create my-repo --description "My first Gitlawb repo" --node http://localhost:7545
+```
+
+Use the git remote helper:
+
+```bash
+export GITLAWB_NODE=http://localhost:7545
+git clone gitlawb://did:key:z6Mk.../my-repo
+```
+
+For public-network use, make sure `GITLAWB_NODE` points to the node you want. The helper defaults to localhost for local development.
+
+### Full lifecycle against an iCaptcha-enforcing node
+
+Public nodes (e.g. `node.gitlawb.com`) require two things on writes:
+
+1. **RFC 9421 HTTP Signatures** — every write is signed by your identity key. `gl`
+   and the `git-remote-gitlawb` helper do this automatically. An old/unsigned CLI
+   fails with `401 not_an_agent`; `gl` will tell you to upgrade and register.
+2. **An iCaptcha proof** on the spam-gated writes (**repo create, fork, register**).
+   `gl` solves this for you: on the node's `403 icaptcha_proof_required` it reads the
+   `x-icaptcha-url` / `x-icaptcha-level` hints, requests a challenge, solves it
+   locally (arithmetic / algebra / sequence), and **retries the same signed request**
+   with the `x-icaptcha-proof` header — no manual steps, no env vars.
+
+```bash
+gl identity new                                   # create did:key identity
+gl register      --node https://node.gitlawb.com  # signed + auto-solves iCaptcha
+gl repo create memlawb --node https://node.gitlawb.com   # signed + auto-solves iCaptcha
+git push  origin2 main                            # origin2 = gitlawb://<your-did>/memlawb (signed)
+git clone gitlawb://<your-did>/memlawb            # public read, no proof needed
+gl doctor                                         # preflight: identity, node, version, iCaptcha
+```
+
+Notes:
+
+- **`requesterId` is always your DID.** The proof's `sub` claim must equal the
+  authenticated signer; `gl`/helper set this automatically and the node enforces
+  `sub == authenticated DID` (so a proof minted for another identity is rejected).
+- **Proofs are short-lived (~5 min TTL) and single-use.** If one expires between
+  solving and use, the client transparently solves a fresh one and retries.
+- **What needs what:** create / fork / register are signed **and** iCaptcha-gated;
+  `git push` is **signed-only** (owner signature is the gate — no per-push challenge);
+  reads (clone / fetch / `repo info`) need no proof. A non-existent repo returns a
+  clear `404`, never a placeholder.
+- **API-key iCaptcha deployments:** set `GITLAWB_ICAPTCHA_URL` to your iCaptcha
+  origin and `GITLAWB_ICAPTCHA_API_KEY` to its key. The client only talks to an
+  `https` origin whose host is allowlisted (that URL or the public default), and
+  sends the bearer token **only** to your configured origin — never to a URL a
+  node advertises — so a hostile node can't capture the key or redirect the solve.
+
+---
+
+## Architecture
+
+```txt
+┌──────────────────────────┐
+│ gl CLI / git / AI agents │
+└────────────┬─────────────┘
+             │ signed HTTP writes / git smart-HTTP
+             ↓
+┌──────────────────────────┐
+│ gitlawb-node             │
+│ Axum API + git routes    │
+└────────────┬─────────────┘
+             │
+    ┌────────┴────────┐
+    ↓                 ↓
+Postgres        Bare git repos
+metadata        local disk / optional S3
+    │                 │
+    └────────┬────────┘
+             ↓
+       libp2p peers
+  gossip + discovery + sync
+             ↓
+ optional IPFS / Arweave / Base PoS
+```
+
+### Core concepts
+
+| Concept | Meaning |
+|---|---|
+| DID | A user, agent, or node identity derived from an Ed25519 public key. |
+| HTTP Signature | RFC 9421 signature proving control of the DID key for write requests. |
+| Ref certificate | Signed record of a ref update. Useful for audit and replication. |
+| UCAN | Delegation token for future capability-based workflows. |
+| Peer announce | Node-to-node HTTP announcement of DID + public URL. |
+| Gossipsub | libp2p topic for ref-update events. |
+| Smart HTTP | Standard git protocol over HTTP for clone/fetch/push. |
+
+---
+
+## API surface
+
+The node exposes both git smart-HTTP routes and JSON APIs.
+
+Common public read routes:
+
+```txt
+GET /health
+GET /
+GET /api/v1/stats
+GET /api/v1/contracts
+GET /api/v1/repos
+GET /api/v1/repos/{owner}/{repo}
+GET /api/v1/repos/{owner}/{repo}/tree
+GET /api/v1/repos/{owner}/{repo}/blob/{path}
+GET /api/v1/repos/{owner}/{repo}/issues
+GET /api/v1/repos/{owner}/{repo}/pulls
+GET /api/v1/peers
+GET /{owner}/{repo}/info/refs
+POST /{owner}/{repo}/git-upload-pack
+```
+
+Signed write routes include:
+
+```txt
+POST /api/v1/repos
+POST /api/register
+POST /api/v1/repos/{owner}/{repo}/fork
+POST /api/v1/repos/{owner}/{repo}/issues
+POST /api/v1/repos/{owner}/{repo}/pulls
+POST /api/v1/repos/{owner}/{repo}/pulls/{number}/merge
+POST /api/v1/repos/{owner}/{repo}/hooks
+POST /api/v1/bounties/{id}/...
+POST /{owner}/{repo}/git-receive-pack
+```
+
+These peer write routes support staged rollout:
+
+```txt
+POST /api/v1/peers/announce
+POST /api/v1/sync/notify
+```
+
+When `GITLAWB_REQUIRE_SIGNED_PEER_WRITES=false`, unsigned legacy peers are accepted on those two routes, but signed requests are verified when signature headers are present. Once all live peers upgrade, operators can set:
+
+```bash
+GITLAWB_REQUIRE_SIGNED_PEER_WRITES=true
+```
+
+`POST /api/v1/sync/trigger` is not part of the staged rollout: it always requires a signature in both config modes and returns 401 without one, because each call drives an O(peers) outbound fan-out.
 
 ---
 
@@ -51,76 +323,193 @@ The node is **stateless beyond Postgres + the repos directory.** You can scale h
 
 All configuration is via environment variables. See [`.env.example`](.env.example) for the full reference.
 
-The minimum required:
+Minimum required for a persistent node:
 
-- `DATABASE_URL` — Postgres connection string
+```env
+DATABASE_URL=postgresql://gitlawb:changeme@localhost:5432/gitlawb
+```
 
-Everything else has sensible defaults. Optional features:
+Important node settings:
 
-- `GITLAWB_TIGRIS_BUCKET` (+ AWS credentials) — S3-compatible shared storage
-- `GITLAWB_PINATA_JWT` — IPFS warm-storage pinning
-- `GITLAWB_IRYS_URL` — Arweave permanent anchoring
-- `GITLAWB_BOOTSTRAP_PEERS` — comma-separated peer URLs to announce to on startup
-- `GITLAWB_P2P_BOOTSTRAP` — comma-separated libp2p multiaddrs
+| Variable | Purpose |
+|---|---|
+| `GITLAWB_HOST` / `GITLAWB_PORT` | HTTP bind address and port. |
+| `GITLAWB_REPOS_DIR` | Local bare repo storage directory. |
+| `GITLAWB_PUBLIC_URL` | Public HTTP URL announced to peers. |
+| `GITLAWB_P2P_PORT` | libp2p QUIC/UDP port. Use `0` to disable. |
+| `GITLAWB_BOOTSTRAP_PEERS` | Comma-separated HTTP peer URLs. |
+| `GITLAWB_P2P_BOOTSTRAP` | Comma-separated libp2p multiaddrs. |
+| `GITLAWB_BOOTSTRAP_DISABLE_SEEDS` | Disable embedded seed peers for isolated dev/test networks. |
+| `GITLAWB_REQUIRE_SIGNED_PEER_WRITES` | Require signed peer announce/sync writes. |
+| `GITLAWB_AUTO_SYNC` | Enable automatic sync from known peers. |
+| `GITLAWB_MAX_PACK_BYTES` | Max git pack body size for smart-HTTP routes. |
+| `GITLAWB_GIT_SERVICE_TIMEOUT_SECS` | Max seconds a served git upload-pack, receive-pack, or `info/refs` advertisement may run before it is aborted (504). Default 600. Also bounds the withheld-blob classification walk (on both the upload-pack serve and receive-pack replication paths) and the push-side pin-candidate discovery (`rev-list` / `cat-file`), each reaped via process-group teardown at the deadline. |
+| `GITLAWB_GIT_ACQUIRE_TIMEOUT_SECS` | Max seconds the storage-acquisition phase (Tigris HEAD/GET, push advisory-lock) of a served git op may run before the request is shed with a 503, separate from the git-run timeout. The concurrency permit is released on expiry so a stalled backend cannot pin the pool. Default 30. |
+| `GITLAWB_MAX_CONCURRENT_IPFS_WALKS` | Max concurrent `GET /ipfs/{cid}` visibility walks across all callers (own pool, disjoint from the served-git pools); over-cap sheds 503. Default 32. |
+| `GITLAWB_IPFS_WALK_PER_SOURCE` | Max concurrent `/ipfs` walks a single source IP may hold. Default 4. |
+| `GITLAWB_IPFS_MAX_REPOS_WALKED` | Max legacy (NULL-provenance) repos probed per `/ipfs/{cid}` request, bounding the scan-fallback fan-out. A truncated scan returns a retryable 503, not a false 404. Default 256. |
+| `GITLAWB_IPFS_RATE_LIMIT` | Max `/ipfs/{cid}` requests per client IP per hour (route flood brake). 0 disables. Default 600. |
+| `GITLAWB_TIGRIS_BUCKET` | Optional S3/Tigris shared repo storage bucket. |
+| `GITLAWB_PINATA_JWT` | Optional Pinata/IPFS warm-storage pinning. |
+| `GITLAWB_IRYS_URL` | Optional Irys/Arweave permanent anchoring. |
 
-### On-chain Proof-of-Stake (advanced, optional)
+Production note: change the default Postgres password before exposing a node publicly.
 
-The node supports an optional on-chain PoS layer where operators register their DID, stake $GITLAWB on Base L2, and receive a share of protocol fees. Smart contracts are in a separate repository at [github.com/gitlawb/contracts](https://github.com/gitlawb/contracts).
-
-PoS is **disabled by default** and currently paused pending external audit. To enable, set `GITLAWB_CONTRACT_NODE_STAKING` and `GITLAWB_OPERATOR_PRIVATE_KEY`. See [`docs/RUN-A-NODE.md`](docs/RUN-A-NODE.md) for details.
+Legacy-pin window: releases before the CID-resolver work stored the provider CID (Kubo dag-pb / Pinata) as a pinned object's resolver key. The `/ipfs/{cid}` resolver now recomputes the raw-content CID from the object bytes and refuses to serve a key that does not match, so `GET /api/v1/ipfs/pins` can still advertise an unrepaired legacy CID that 404s. Such a row is repaired opportunistically the next time a push carries the object again (its key is rewritten to the raw CID, the old value kept in `legacy_provider_cid`), but git negotiation omits objects the node already has, so most legacy rows never re-enter a push delta. A deferred one-shot startup sweep, not this opportunistic path, is what fully retires the advertise-then-404 window. Rows whose object bytes are gone stay withheld.
 
 ---
 
-## Build from source
+## Optional node staking
 
-Requires Rust 1.85+ and a Postgres instance.
+Gitlawb Node includes optional Base L2 node-operator hooks. Operators can register a node DID, stake `$GITLAWB`, and post heartbeats.
+
+PoS is disabled unless these are configured:
+
+```env
+GITLAWB_CONTRACT_NODE_STAKING=0x...
+GITLAWB_OPERATOR_PRIVATE_KEY=0x...
+GITLAWB_CHAIN_RPC_URL=https://mainnet.base.org
+```
+
+Recommended for operators:
+
+```env
+GITLAWB_OPERATOR_STRICT_MODE=true
+GITLAWB_HEARTBEAT_INTERVAL_HOURS=20
+```
+
+Read:
+
+- [`docs/RUN-A-NODE.md`](docs/RUN-A-NODE.md)
+- [`docs/ECONOMICS.md`](docs/ECONOMICS.md)
+
+Use a dedicated low-balance operator wallet. Do not use a treasury wallet as the heartbeat key.
+
+---
+
+## Building from source
+
+Requires Rust 1.91+.
 
 ```bash
 cargo build --release -p gitlawb-node -p gl -p git-remote-gitlawb
 ```
 
-Binaries are placed in `target/release/`. The `gl` and `git-remote-gitlawb` binaries should be on your `$PATH` for client use.
-
----
-
-## CLI usage
+Run tests:
 
 ```bash
-gl identity new
-gl register --node http://localhost:7545
-gl repo create my-repo --description "..."
-git clone gitlawb://did:key:z6Mk.../my-repo
+cargo fmt --all -- --check
+cargo clippy --workspace --all-targets -- -D warnings
+cargo test --workspace
 ```
 
-Full CLI reference: `gl --help`.
+Run the node from source:
+
+```bash
+DATABASE_URL=postgresql://gitlawb:changeme@localhost:5432/gitlawb \
+  cargo run -p gitlawb-node --release
+```
 
 ---
 
-## Architecture
+## macOS menu bar app
 
+A native Swift/AppKit menu bar app is included for managing a local Docker Compose stack without living in the terminal.
+
+Requirements:
+
+- macOS 26+
+- Xcode Command Line Tools
+- Docker Desktop, OrbStack, or Colima
+
+Build:
+
+```bash
+./scripts/build-macos-app.sh
 ```
-crates/
-├── gitlawb-core/        crypto primitives (DID, CID, HTTP sigs, UCAN)
-├── gitlawb-node/        node daemon (Axum + git smart-HTTP)
-├── gl/                  CLI
-└── git-remote-gitlawb/  git remote helper
+
+Output:
+
+```txt
+dist/Gitlawb Node.app
+dist/Gitlawb Node.dmg
+```
+
+Features:
+
+- Start/stop local node stack.
+- Status indicator.
+- Settings GUI.
+- Auto-start on login.
+- Docker runtime detection.
+
+Unsigned local build:
+
+```bash
+xattr -cr "dist/Gitlawb Node.app"
+```
+
+---
+
+## Roadmap
+
+The current maintainer focus is live-network stability first.
+
+Short-term priorities:
+
+1. Keep CI green: fmt, clippy, tests, release build.
+2. Add Docker and installer smoke tests.
+3. Improve operator docs and `gl doctor` checks.
+4. Harden peer writes and publish the signed-peer rollout plan.
+5. Implement repo write authorization: owner checks, protected branches, and UCAN capability checks.
+6. Implement private-read enforcement or remove private repo affordances until it exists.
+7. Add metrics for pushes, fetches, pack sizes, peer sync, failed auth, and webhooks.
+
+Product direction:
+
+1. Reliable repo replication.
+2. Health-aware peer syncing.
+3. CDN-style clone/fetch routing to healthy replicas.
+4. App asset/build delivery from nodes.
+5. Operator dashboard and desktop UX.
+
+Read the maintainer roadmap:
+
+```txt
+docs/MAINTAINER-ROADMAP.md
 ```
 
 ---
 
 ## Contributing
 
-See [`CONTRIBUTING.md`](CONTRIBUTING.md). Security issues: see [`SECURITY.md`](SECURITY.md).
+Start here:
+
+- [`CONTRIBUTING.md`](CONTRIBUTING.md)
+- [`docs/MAINTAINER-ROADMAP.md`](docs/MAINTAINER-ROADMAP.md)
+- [`docs/OSS-READINESS-AUDIT.md`](docs/OSS-READINESS-AUDIT.md)
+- [`SECURITY.md`](SECURITY.md)
+
+Good first contribution areas:
+
+- docs and install polish
+- Docker smoke tests
+- CLI error messages
+- `gl doctor` checks
+- operator dashboard UX
+- test coverage for peer sync and signed writes
+
+Security issues should follow [`SECURITY.md`](SECURITY.md).
+
+---
 
 ## License
 
-Licensed under either of
+Licensed under either of:
 
 - Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or http://www.apache.org/licenses/LICENSE-2.0)
 - MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT)
 
 at your option.
 
-### Contribution
-
-Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
+Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in this project shall be dual licensed as above, without any additional terms or conditions.

SECURITY.md

@@ -16,7 +16,7 @@ We will acknowledge receipt within 48 hours and aim to release a fix within 14 d
 
 ## Current Security Architecture
 
-### What is production-ready (v0.1)
+### Current live security controls
 
 **Ed25519 identity and HTTP Signatures**
 - Every write operation is signed with RFC 9421 HTTP Signatures
@@ -42,35 +42,46 @@ We will acknowledge receipt within 48 hours and aim to release a fix within 14 d
 
 ## Dependency Vulnerability Status
 
-| Crate | Advisory | Severity | Status |
-|-------|----------|----------|--------|
-| `rsa 0.9.x` | RUSTSEC-2023-0071 Marvin Attack | Medium | Unexploitable — bundled via `sqlx-mysql` internals; gitlawb uses PostgreSQL only, MySQL auth code is never executed. No upstream fix available. |
-| `lru 0.12.x` | RUSTSEC-2026-0002 unsound IterMut | Warning | In `libp2p-swarm`; the specific unsafe code path is internal to libp2p and not reachable through gitlawb's usage. No upstream fix yet. |
+| Area | Status |
+|------|--------|
+| Dependabot alerts | Current open Rust alerts were addressed by updating vulnerable dependencies, removing libp2p mDNS, and moving P2P transport from TCP/Yamux to QUIC/UDP. |
 
 ---
 
 ## Known Limitations (Planned for v0.2)
 
-These are **documented, accepted limitations** for the current testnet release. They will be addressed before mainnet.
+These are **documented, accepted limitations** for the current live release and should be prioritized without breaking existing nodes during rolling upgrades.
 
 ### UCAN chain validation
 - The auth middleware verifies HTTP Signatures and token structure, but does not yet walk the full UCAN delegation chain.
 - **Impact:** A node cannot yet enforce fine-grained capability delegation. Currently, any registered agent with a valid HTTP Signature can push.
-- **Mitigation:** Nodes can set `GITLAWB_PUBLIC_READ=false` to restrict access. The v0.1 trust score system provides soft rate limiting.
+- **Mitigation:** Keep write endpoints signed, treat public nodes as public infrastructure, and treat trust scores as soft rate-limiting signals rather than authorization.
 - **Fix target:** v0.2
 
 ### UCAN revocation
 - Issued UCAN tokens cannot be revoked before expiry.
 - **Impact:** If a keypair is compromised, the attacker retains access until the UCAN expires (default: 30 days).
-- **Mitigation:** Regenerate your identity (`gl identity new --force`) and re-register to issue a new UCAN. Nodes will reject the old DID on sight if manually blocklisted.
+- **Mitigation:** Regenerate your identity (`gl identity new --force`) and re-register to issue a new UCAN. Until revocation/blocklisting is implemented, operators should remove compromised DIDs directly from their local database.
 - **Fix target:** v0.2
 
 ### git-receive-pack authentication
-- The `git-receive-pack` endpoint enforces HTTP Signature auth via the `git-remote-gitlawb` remote helper. Direct HTTP push without the helper is currently unauthenticated on v0.1 nodes.
-- **Impact:** A node operator accepting direct HTTP git pushes (not via `gitlawb://`) cannot verify the pusher's identity.
-- **Mitigation:** Use `gitlawb://` remote URLs. Do not expose `POST /*/git-receive-pack` to untrusted networks.
+- The `git-receive-pack` endpoint enforces HTTP Signature auth. Plain Git smart-HTTP clients do not generate those headers, so the `git-remote-gitlawb` helper is required for pushes.
+- **Impact:** Direct HTTP pushes without RFC 9421 headers are rejected; users need `gitlawb://` remotes or equivalent signed clients.
+- **Mitigation:** Use `gitlawb://` remote URLs and keep `git-remote-gitlawb` on the user's `PATH`.
 - **Fix target:** v0.2
 
+### Private repository reads
+- Repository records have an `is_public` field and the node exposes `GITLAWB_PUBLIC_READ`, but per-repository private-read enforcement is not wired in the current live release.
+- **Impact:** Do not store private repositories or secrets on public nodes.
+- **Mitigation:** Run isolated nodes for non-public data and restrict network access at the reverse proxy or firewall layer.
+- **Fix target:** v0.2
+
+### Peer route hardening rollout
+- Peer announce and sync notification routes accept signed requests and verify DID matches when a signature is present.
+- **Impact:** Unsigned peer writes are still accepted by default so existing live nodes can keep communicating during rolling upgrades.
+- **Mitigation:** After all active peers run signed-node builds, operators can set `GITLAWB_REQUIRE_SIGNED_PEER_WRITES=true`.
+- **Fix target:** staged rollout
+
 ---
 
 ## Supported Versions

bootstrap-peers.json

@@ -0,0 +1,47 @@
+{
+  "$comment": "Canonical seed list for the Gitlawb network. Merged with GITLAWB_BOOTSTRAP_PEERS at startup. PRs to add public nodes welcome.",
+  "version": 1,
+  "updated": "2026-06-30",
+  "peers": [
+    {
+      "name": "gitlawb",
+      "operator": "Gitlawb",
+      "did": "did:key:z6MkqDnb7Siv3Cwj7pGJq4T5EsUisECqR8KpnDLwcaZq5TPr",
+      "http_url": "https://node.gitlawb.com",
+      "p2p_multiaddr": null,
+      "added": "2026-04-29"
+    },
+    {
+      "name": "gitlawb-node2",
+      "operator": "Gitlawb",
+      "did": null,
+      "http_url": "https://node2.gitlawb.com",
+      "p2p_multiaddr": null,
+      "added": "2026-06-30"
+    },
+    {
+      "name": "gitlawb-node3",
+      "operator": "Gitlawb",
+      "did": null,
+      "http_url": "https://node3.gitlawb.com",
+      "p2p_multiaddr": null,
+      "added": "2026-06-30"
+    },
+    {
+      "name": "gitlawb-manila",
+      "operator": "Gitlawb",
+      "did": null,
+      "http_url": "https://manila.gitlawb.com",
+      "p2p_multiaddr": null,
+      "added": "2026-06-30"
+    },
+    {
+      "name": "rapybus-gitlawb",
+      "operator": "RapyBus S.A.C.",
+      "did": "did:key:z6MktERLyhFpjUyN7dnkf7CYY5RXKJ6BTZiKohoi37YVBS7R",
+      "http_url": "https://rapybus-gitlawb.com",
+      "p2p_multiaddr": null,
+      "added": "2026-05-16"
+    }
+  ]
+}

crates/git-remote-gitlawb/Cargo.toml

@@ -1,8 +1,9 @@
 [package]
 name = "git-remote-gitlawb"
 description = "Git remote helper — enables 'git clone gitlawb://did:gitlawb:...'"
-version.workspace = true
+version = "0.5.1" # x-release-please-version
 edition.workspace = true
+rust-version.workspace = true
 license.workspace = true
 
 [[bin]]
@@ -15,3 +16,6 @@ anyhow = { workspace = true }
 reqwest = { workspace = true }
 tracing = { workspace = true }
 tracing-subscriber = { workspace = true }
+
+[dev-dependencies]
+mockito = "1"

crates/gitlawb-attest/Cargo.toml

@@ -0,0 +1,22 @@
+[package]
+name = "gitlawb-attest"
+description = "External Attestation v1: pluggable provenance attachments for gitlawb ref-update certs"
+version = "0.5.1" # x-release-please-version
+edition.workspace = true
+rust-version.workspace = true
+license.workspace = true
+
+[dependencies]
+serde = { workspace = true }
+serde_json = { workspace = true }
+serde_jcs = { workspace = true }
+thiserror = { workspace = true }
+ed25519-dalek = { workspace = true }
+sha2 = { workspace = true }
+hex = { workspace = true }
+base64 = { workspace = true }
+multibase = { workspace = true }
+
+[dev-dependencies]
+gitlawb-core = { path = "../gitlawb-core" }
+rand = { workspace = true }

crates/gitlawb-attest/src/attestation.rs

@@ -0,0 +1,557 @@
+//! One typed, signed, cert-bound provenance blob.
+//!
+//! Fields: `type` (discriminator), `payload` (opaque, type-specific JSON),
+//! `cert_hash` (binds to one ref-update cert), `signer` (`did:key`), and
+//! `sig` (base64url-no-pad ed25519).
+//!
+//! The signature covers the domain-separated input
+//! `b"gitlawb-attest-sig/v1\n"` followed by JCS-encoded `{type, payload,
+//! cert_hash}` per RFC 8785. The domain tag is in the byte stream rather
+//! than the canonical JSON so the wire shape stays additive: an `Attestation`
+//! deserialized today and one constructed by a future `v2` signer differ only
+//! by which tag the verifier prepends.
+//!
+//! Type discriminators are slash-separated namespace + version strings
+//! (`covenant/exec/v1`, `slsa/v1.0`, `sigstore/dsse/v1`); verifiers register
+//! by exact match.
+
+use base64::{engine::general_purpose::URL_SAFE_NO_PAD as B64U, Engine};
+use ed25519_dalek::{Signature, Signer, SigningKey, Verifier, VerifyingKey};
+use serde::{de::DeserializeOwned, Deserialize, Serialize};
+
+use crate::error::{Error, Result};
+
+/// Domain-separation tag prepended to the JCS signing input. Bumped to
+/// `v2` if the signing-input shape changes.
+const SIGNING_DOMAIN: &[u8] = b"gitlawb-attest-sig/v1\n";
+
+/// Multicodec varint prefix for Ed25519 public keys (0xed 0x01).
+const ED25519_MULTICODEC: [u8; 2] = [0xed, 0x01];
+
+/// A signed provenance blob attached to a ref-update cert.
+#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
+pub struct Attestation {
+    /// Type discriminator, e.g. `covenant/exec/v1`.
+    #[serde(rename = "type")]
+    pub type_: String,
+
+    /// Type-specific payload. The verifier reparses into its concrete shape.
+    pub payload: serde_json::Value,
+
+    /// Lowercase SHA-256 hex of the cert body. Binds this attestation to one
+    /// cert. The lowercase form is canonical because the JCS signing input
+    /// includes this field verbatim — accepting mixed case on the wire would
+    /// require both signer and verifier to normalize before computing the
+    /// JCS bytes, an easy spec rule to miss across language ports.
+    pub cert_hash: String,
+
+    /// `did:key` of the signer; the verifying key is recoverable from it.
+    pub signer: String,
+
+    /// base64url-no-pad ed25519 signature over the JCS signing input.
+    pub sig: String,
+}
+
+/// Type-specific payload. Implement on a struct that is `Serialize +
+/// DeserializeOwned` to participate.
+pub trait AttestationPayload: Serialize + DeserializeOwned + Send + Sync {
+    /// The discriminator string written on the wire.
+    fn payload_type() -> &'static str;
+}
+
+#[derive(Serialize)]
+struct SigningInput<'a> {
+    #[serde(rename = "type")]
+    type_: &'a str,
+    payload: &'a serde_json::Value,
+    cert_hash: &'a str,
+}
+
+impl Attestation {
+    /// Sign a fresh attestation. `cert_hash_bytes` comes from
+    /// [`crate::cert::cert_hash`].
+    pub fn sign<P: AttestationPayload>(
+        signing_key: &SigningKey,
+        payload: P,
+        cert_hash_bytes: [u8; 32],
+    ) -> Result<Self> {
+        let type_ = P::payload_type().to_string();
+        validate_type(&type_)?;
+        let payload_value = serde_json::to_value(payload)?;
+        let cert_hash_hex = hex::encode(cert_hash_bytes);
+
+        let bytes = canonical_signing_bytes(&type_, &payload_value, &cert_hash_hex)?;
+        let sig: Signature = signing_key.sign(&bytes);
+
+        Ok(Self {
+            type_,
+            payload: payload_value,
+            cert_hash: cert_hash_hex,
+            signer: did_key_from_verifying_key(&signing_key.verifying_key()),
+            sig: B64U.encode(sig.to_bytes()),
+        })
+    }
+
+    /// Verify the signature and check that `cert_hash` matches
+    /// `expected_cert_hash`. Returns the recovered verifying key so the caller
+    /// can check it against an allowlist.
+    pub fn verify_signature(&self, expected_cert_hash: [u8; 32]) -> Result<VerifyingKey> {
+        let expected_hex = hex::encode(expected_cert_hash);
+        if self.cert_hash != expected_hex {
+            return Err(Error::CertHashMismatch);
+        }
+
+        validate_type(&self.type_)?;
+        let bytes = canonical_signing_bytes(&self.type_, &self.payload, &self.cert_hash)?;
+
+        let vk = verifying_key_from_did_key(&self.signer)?;
+        let sig_bytes: [u8; 64] = B64U
+            .decode(&self.sig)
+            .map_err(|e| Error::Signature(format!("base64url: {e}")))?
+            .try_into()
+            .map_err(|_| Error::Signature("signature must be 64 bytes".to_string()))?;
+        let sig = Signature::from_bytes(&sig_bytes);
+        vk.verify(&bytes, &sig)
+            .map_err(|e| Error::Signature(format!("ed25519: {e}")))?;
+
+        Ok(vk)
+    }
+
+    /// Reparse `payload` as `P`. Errors if the type discriminator does not
+    /// match `P::payload_type()`.
+    pub fn payload_as<P: AttestationPayload>(&self) -> Result<P> {
+        if self.type_ != P::payload_type() {
+            return Err(Error::Type(format!(
+                "expected '{}', got '{}'",
+                P::payload_type(),
+                self.type_
+            )));
+        }
+        Ok(P::deserialize(&self.payload)?)
+    }
+}
+
+/// Discriminator grammar: nonempty, ASCII-graphic only, slash-separated
+/// segments of `[a-zA-Z0-9._+-]`, no empty segment, capped at 128 bytes.
+/// Matches `covenant/exec/v1`, `slsa/v1.0`, `sigstore/dsse/v1`.
+fn validate_type(t: &str) -> Result<()> {
+    if t.is_empty() {
+        return Err(Error::Type("empty discriminator".to_string()));
+    }
+    if t.len() > 128 {
+        return Err(Error::Type(format!(
+            "discriminator longer than 128 bytes ({})",
+            t.len()
+        )));
+    }
+    if !t.is_ascii() {
+        return Err(Error::Type(format!("discriminator must be ASCII: '{t}'")));
+    }
+    for segment in t.split('/') {
+        if segment.is_empty() {
+            return Err(Error::Type(format!(
+                "discriminator has an empty segment: '{t}'"
+            )));
+        }
+        for c in segment.chars() {
+            if !(c.is_ascii_alphanumeric() || c == '.' || c == '_' || c == '+' || c == '-') {
+                return Err(Error::Type(format!(
+                    "discriminator segment '{segment}' has disallowed character '{c}'"
+                )));
+            }
+        }
+    }
+    Ok(())
+}
+
+fn canonical_signing_bytes(
+    type_: &str,
+    payload: &serde_json::Value,
+    cert_hash_hex: &str,
+) -> Result<Vec<u8>> {
+    let input = SigningInput {
+        type_,
+        payload,
+        cert_hash: cert_hash_hex,
+    };
+    let jcs = serde_jcs::to_vec(&input).map_err(|e| Error::Jcs(e.to_string()))?;
+    let mut out = Vec::with_capacity(SIGNING_DOMAIN.len() + jcs.len());
+    out.extend_from_slice(SIGNING_DOMAIN);
+    out.extend_from_slice(&jcs);
+    Ok(out)
+}
+
+fn did_key_from_verifying_key(key: &VerifyingKey) -> String {
+    let mut buf = Vec::with_capacity(ED25519_MULTICODEC.len() + 32);
+    buf.extend_from_slice(&ED25519_MULTICODEC);
+    buf.extend_from_slice(&key.to_bytes());
+    let encoded = multibase::encode(multibase::Base::Base58Btc, &buf);
+    format!("did:key:{encoded}")
+}
+
+/// The DID:key spec mandates base58btc (multibase `z`-prefix). Other multibase
+/// encodings of the same key bytes are rejected so allowlists, dedup, and
+/// signer-pinning policies that compare `signer` strings remain consistent
+/// across peers.
+fn verifying_key_from_did_key(did: &str) -> Result<VerifyingKey> {
+    let method_id = did
+        .strip_prefix("did:key:")
+        .ok_or_else(|| Error::Did(format!("not a did:key: {did}")))?;
+    if !method_id.starts_with('z') {
+        return Err(Error::Did(format!(
+            "did:key must use base58btc (z-prefix): {did}"
+        )));
+    }
+    let (base, bytes) =
+        multibase::decode(method_id).map_err(|e| Error::Did(format!("multibase: {e}")))?;
+    if base != multibase::Base::Base58Btc {
+        return Err(Error::Did(format!(
+            "did:key must use base58btc (z-prefix): {did}"
+        )));
+    }
+    if bytes.len() != ED25519_MULTICODEC.len() + 32
+        || bytes[..ED25519_MULTICODEC.len()] != ED25519_MULTICODEC
+    {
+        return Err(Error::Did("not an ed25519 did:key".to_string()));
+    }
+    let key_bytes: [u8; 32] = bytes[ED25519_MULTICODEC.len()..]
+        .try_into()
+        .expect("length checked above");
+    VerifyingKey::from_bytes(&key_bytes)
+        .map_err(|e| Error::Did(format!("invalid ed25519 key: {e}")))
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use ed25519_dalek::SigningKey;
+    use rand::rngs::OsRng;
+    use serde::{Deserialize, Serialize};
+
+    fn fresh() -> SigningKey {
+        SigningKey::generate(&mut OsRng)
+    }
+
+    #[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
+    struct DummyPayload {
+        agent: String,
+        commit: String,
+    }
+
+    impl AttestationPayload for DummyPayload {
+        fn payload_type() -> &'static str {
+            "test/dummy/v1"
+        }
+    }
+
+    fn sample_cert_hash() -> [u8; 32] {
+        let mut h = [0u8; 32];
+        for (i, b) in h.iter_mut().enumerate() {
+            *b = i as u8;
+        }
+        h
+    }
+
+    fn dummy_attestation(sk: &SigningKey, cert_hash: [u8; 32]) -> Attestation {
+        Attestation::sign(
+            sk,
+            DummyPayload {
+                agent: "a".to_string(),
+                commit: "b".to_string(),
+            },
+            cert_hash,
+        )
+        .unwrap()
+    }
+
+    #[test]
+    fn sign_then_verify_roundtrip() {
+        let sk = fresh();
+        let cert_hash = sample_cert_hash();
+        let payload = DummyPayload {
+            agent: "did:key:z6MkTest".to_string(),
+            commit: "deadbeef".to_string(),
+        };
+        let att = Attestation::sign(&sk, payload.clone(), cert_hash).unwrap();
+        let vk = att.verify_signature(cert_hash).unwrap();
+        assert_eq!(vk.to_bytes(), sk.verifying_key().to_bytes());
+        assert_eq!(att.payload_as::<DummyPayload>().unwrap(), payload);
+    }
+
+    #[test]
+    fn cross_cert_replay_fails() {
+        let sk = fresh();
+        let cert_a = sample_cert_hash();
+        let mut cert_b = sample_cert_hash();
+        cert_b[0] ^= 0xff;
+        let att = dummy_attestation(&sk, cert_a);
+        let err = att.verify_signature(cert_b).unwrap_err();
+        assert!(matches!(err, Error::CertHashMismatch));
+    }
+
+    #[test]
+    fn tampered_payload_fails_verify() {
+        let sk = fresh();
+        let cert_hash = sample_cert_hash();
+        let mut att = dummy_attestation(&sk, cert_hash);
+        att.payload = serde_json::json!({ "agent": "evil", "commit": "b" });
+        let err = att.verify_signature(cert_hash).unwrap_err();
+        assert!(matches!(err, Error::Signature(_)));
+    }
+
+    #[test]
+    fn payload_as_wrong_type_errors() {
+        let sk = fresh();
+        let att = dummy_attestation(&sk, sample_cert_hash());
+
+        #[derive(Debug, Serialize, Deserialize)]
+        struct Wrong {
+            #[allow(dead_code)]
+            x: String,
+        }
+        impl AttestationPayload for Wrong {
+            fn payload_type() -> &'static str {
+                "test/other/v1"
+            }
+        }
+        let err = att.payload_as::<Wrong>().unwrap_err();
+        assert!(matches!(err, Error::Type(_)));
+    }
+
+    #[test]
+    fn json_roundtrip_preserves_signature() {
+        let sk = fresh();
+        let cert_hash = sample_cert_hash();
+        let att = dummy_attestation(&sk, cert_hash);
+        let json = serde_json::to_string(&att).unwrap();
+        let back: Attestation = serde_json::from_str(&json).unwrap();
+        back.verify_signature(cert_hash).unwrap();
+    }
+
+    /// Wire shape is part of the public protocol — pin field names so an
+    /// accidental rename surfaces as a test failure, not silent interop drift.
+    #[test]
+    fn wire_shape_pins_field_names() {
+        let sk = fresh();
+        let att = dummy_attestation(&sk, sample_cert_hash());
+        let v: serde_json::Value = serde_json::to_value(&att).unwrap();
+        let obj = v.as_object().expect("attestation must serialize as object");
+        let keys: std::collections::BTreeSet<&str> = obj.keys().map(String::as_str).collect();
+        let expected: std::collections::BTreeSet<&str> =
+            ["type", "payload", "cert_hash", "signer", "sig"]
+                .into_iter()
+                .collect();
+        assert_eq!(keys, expected);
+        assert!(obj["type"].is_string());
+        assert!(obj["cert_hash"].is_string());
+        assert!(obj["signer"].is_string());
+        assert!(obj["sig"].is_string());
+    }
+
+    /// The spec mandates lowercase hex on the wire. An uppercase cert_hash
+    /// is rejected as `CertHashMismatch` so a non-canonical signer can't
+    /// produce attestations that verify against some peers but not others.
+    #[test]
+    fn uppercase_cert_hash_is_rejected_as_non_canonical() {
+        let sk = fresh();
+        let cert_hash = sample_cert_hash();
+        let mut att = dummy_attestation(&sk, cert_hash);
+        att.cert_hash = att.cert_hash.to_uppercase();
+        let err = att.verify_signature(cert_hash).unwrap_err();
+        assert!(matches!(err, Error::CertHashMismatch));
+    }
+
+    #[test]
+    fn empty_type_rejected_at_signing() {
+        #[derive(Serialize, Deserialize)]
+        struct Empty {}
+        impl AttestationPayload for Empty {
+            fn payload_type() -> &'static str {
+                ""
+            }
+        }
+        let sk = fresh();
+        let err = Attestation::sign(&sk, Empty {}, sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Type(_)));
+    }
+
+    #[test]
+    fn validate_type_grammar() {
+        validate_type("covenant/exec/v1").unwrap();
+        validate_type("slsa/v1.0").unwrap();
+        validate_type("sigstore/dsse/v1").unwrap();
+        validate_type("a").unwrap();
+        validate_type("a.b-c_d+e/x").unwrap();
+
+        for bad in [
+            "",
+            " ",
+            "covenant/exec/v1 ",
+            "covenant//v1",
+            "/covenant/v1",
+            "covenant/v1/",
+            "covenant\x00exec/v1",
+            "covenant/exec\nv1",
+            "сovenant/exec/v1",
+            "covenant/ex ec/v1",
+            "covenant/exec/v1#frag",
+        ] {
+            let err = validate_type(bad).unwrap_err();
+            assert!(matches!(err, Error::Type(_)), "must reject '{bad}'");
+        }
+
+        let too_long = "a/".repeat(70);
+        let err = validate_type(&too_long).unwrap_err();
+        assert!(matches!(err, Error::Type(_)));
+    }
+
+    #[test]
+    fn did_key_must_be_base58btc() {
+        // Sign with a real key, then re-encode the public-key bytes in a
+        // different multibase. Verification must reject.
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        let mut buf = Vec::with_capacity(34);
+        buf.extend_from_slice(&ED25519_MULTICODEC);
+        buf.extend_from_slice(&sk.verifying_key().to_bytes());
+        for base in [
+            multibase::Base::Base64Url,
+            multibase::Base::Base32Lower,
+            multibase::Base::Base16Lower,
+        ] {
+            att.signer = format!("did:key:{}", multibase::encode(base, &buf));
+            let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+            assert!(matches!(err, Error::Did(_)), "must reject base {base:?}");
+        }
+    }
+
+    #[test]
+    fn verify_rejects_did_without_did_key_prefix() {
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        att.signer = "ed25519:abc".to_string();
+        let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Did(_)));
+    }
+
+    #[test]
+    fn verify_rejects_did_with_wrong_multicodec() {
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        // 0x12 0x00 = sha2-256 multicodec — wrong for an ed25519 public key.
+        let mut buf = vec![0x12, 0x00];
+        buf.extend_from_slice(&sk.verifying_key().to_bytes());
+        att.signer = format!(
+            "did:key:{}",
+            multibase::encode(multibase::Base::Base58Btc, &buf)
+        );
+        let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Did(_)));
+    }
+
+    #[test]
+    fn verify_rejects_did_with_wrong_key_length() {
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        let mut buf = Vec::with_capacity(33);
+        buf.extend_from_slice(&ED25519_MULTICODEC);
+        // 31 bytes instead of 32.
+        buf.extend_from_slice(&sk.verifying_key().to_bytes()[..31]);
+        att.signer = format!(
+            "did:key:{}",
+            multibase::encode(multibase::Base::Base58Btc, &buf)
+        );
+        let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Did(_)));
+    }
+
+    #[test]
+    fn verify_rejects_bad_signature_base64() {
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        att.sig = "!!not-base64!!".to_string();
+        let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Signature(_)));
+    }
+
+    #[test]
+    fn verify_rejects_signature_wrong_length() {
+        let sk = fresh();
+        let mut att = dummy_attestation(&sk, sample_cert_hash());
+        att.sig = B64U.encode([0u8; 32]); // valid base64, wrong size.
+        let err = att.verify_signature(sample_cert_hash()).unwrap_err();
+        assert!(matches!(err, Error::Signature(_)));
+    }
+
+    /// A payload that happens to contain a `cert_hash` field of its own does
+    /// not interfere with the outer binding: the attestation envelope's
+    /// `cert_hash` is the only field consulted by `verify_signature`, and the
+    /// payload is treated as opaque JSON throughout. A reviewer worried about
+    /// shadowing or smuggling can verify this directly.
+    #[test]
+    fn payload_cert_hash_field_does_not_shadow_outer_binding() {
+        #[derive(Serialize, Deserialize)]
+        struct Sneaky {
+            cert_hash: String,
+            x: String,
+        }
+        impl AttestationPayload for Sneaky {
+            fn payload_type() -> &'static str {
+                "test/sneaky/v1"
+            }
+        }
+
+        let sk = fresh();
+        let outer_hash = sample_cert_hash();
+        let att = Attestation::sign(
+            &sk,
+            Sneaky {
+                cert_hash: "forged-by-the-attacker".to_string(),
+                x: "y".to_string(),
+            },
+            outer_hash,
+        )
+        .unwrap();
+
+        // Envelope's cert_hash is the outer (real) hash, lowercase hex.
+        assert_eq!(att.cert_hash, hex::encode(outer_hash));
+        // Payload retains its own field — opaque to the protocol.
+        assert_eq!(
+            att.payload.get("cert_hash").and_then(|v| v.as_str()),
+            Some("forged-by-the-attacker"),
+        );
+        // Verification binds to the outer envelope's cert_hash.
+        att.verify_signature(outer_hash).unwrap();
+        // And rejects when the outer cert hash differs.
+        let mut wrong = outer_hash;
+        wrong[0] ^= 0xff;
+        let err = att.verify_signature(wrong).unwrap_err();
+        assert!(matches!(err, Error::CertHashMismatch));
+    }
+
+    /// A different protocol that also signs `{type, payload, cert_hash}` with
+    /// the same key would still fail attestation verification because the
+    /// signing input carries a domain tag the other protocol does not include.
+    #[test]
+    fn cross_protocol_replay_is_rejected_by_domain_separation() {
+        let sk = fresh();
+        let cert_hash = sample_cert_hash();
+        let att = dummy_attestation(&sk, cert_hash);
+
+        // Sign the same JCS bytes WITHOUT the domain tag and graft the
+        // signature back onto the attestation.
+        let cert_hash_hex = hex::encode(cert_hash);
+        let bare = serde_jcs::to_vec(&SigningInput {
+            type_: &att.type_,
+            payload: &att.payload,
+            cert_hash: &cert_hash_hex,
+        })
+        .unwrap();
+        let other_sig: Signature = sk.sign(&bare);
+        let mut tampered = att.clone();
+        tampered.sig = B64U.encode(other_sig.to_bytes());
+
+        let err = tampered.verify_signature(cert_hash).unwrap_err();
+        assert!(matches!(err, Error::Signature(_)));
+    }
+}

crates/gitlawb-attest/src/cert.rs

@@ -0,0 +1,327 @@
+//! Envelope around a `gitlawb/ref-update/v1` cert plus optional attestations,
+//! and the cert-hash helper attestations bind to.
+//!
+//! An empty envelope serializes to the same bytes as the underlying bare cert.
+//! `cert_hash` strips `signatures` and `attestations`, JCS-encodes the rest,
+//! and SHA-256s; the result is what every attestation binds to.
+
+use serde::{Deserialize, Serialize};
+use sha2::{Digest, Sha256};
+
+use crate::attestation::Attestation;
+use crate::error::{Error, Result};
+use crate::verifier::{Registry, VerifiedAttestation};
+
+/// The discriminator the wrapped cert must carry. Matches the constant of the
+/// same name in `gitlawb-core::cert`.
+pub const CERT_TYPE: &str = "gitlawb/ref-update/v1";
+
+/// A ref-update cert with optional attestations.
+///
+/// The cert is flattened into the top-level JSON, so an empty envelope
+/// produces the same bytes as a bare cert and existing decoders ignore the
+/// extra `attestations` field. The cert is held as `serde_json::Value` so
+/// this crate has no runtime dependency on `gitlawb-core::cert::RefUpdateCert`.
+#[derive(Debug, Clone, Serialize, Deserialize)]
+pub struct AttestedRefUpdateCert {
+    /// The cert body and signatures, flattened to the top level.
+    #[serde(flatten)]
+    pub cert: serde_json::Value,
+
+    /// Attached attestations. Empty when absent on the wire.
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub attestations: Vec<Attestation>,
+}
+
+impl AttestedRefUpdateCert {
+    /// Wrap a cert. No attestations are attached yet.
+    ///
+    /// The serialized cert must be a JSON object whose `type` field equals
+    /// [`CERT_TYPE`] and which does **not** already carry an `attestations`
+    /// field. The second rule catches two cases that would otherwise leave
+    /// the envelope in an inconsistent in-memory state:
+    ///
+    /// - Double-wrap: `from_cert(&previously_wrapped_envelope)` would put the
+    ///   inner attestations on `self.cert` and leave `self.attestations` empty.
+    /// - Pre-attested cert from a peer: a malformed or malicious cert with an
+    ///   attached `attestations` field would survive `cert_hash` (which strips
+    ///   the field) but bypass the wrapper's append-and-verify path entirely.
+    ///
+    /// Both are rejected with [`Error::Payload`]. To re-wrap, deserialize the
+    /// envelope as `AttestedRefUpdateCert` directly.
+    pub fn from_cert<T: Serialize>(cert: &T) -> Result<Self> {
+        let value = serde_json::to_value(cert)?;
+        let obj = value
+            .as_object()
+            .ok_or_else(|| Error::Payload("cert must serialize as a JSON object".to_string()))?;
+        match obj.get("type").and_then(|v| v.as_str()) {
+            Some(t) if t == CERT_TYPE => {}
+            Some(other) => {
+                return Err(Error::Payload(format!(
+                    "cert type must be '{CERT_TYPE}', got '{other}'"
+                )));
+            }
+            None => {
+                return Err(Error::Payload(format!(
+                    "cert missing 'type' field (expected '{CERT_TYPE}')"
+                )));
+            }
+        }
+        if obj.contains_key("attestations") {
+            return Err(Error::Payload(
+                "cert already carries an 'attestations' field; deserialize as \
+                 AttestedRefUpdateCert directly instead of re-wrapping"
+                    .to_string(),
+            ));
+        }
+        Ok(Self {
+            cert: value,
+            attestations: Vec::new(),
+        })
+    }
+
+    /// The 32-byte cert hash every attached attestation must bind to.
+    pub fn cert_hash(&self) -> Result<[u8; 32]> {
+        cert_hash(&self.cert)
+    }
+
+    /// Append an already-signed attestation.
+    pub fn attach(&mut self, attestation: Attestation) {
+        self.attestations.push(attestation);
+    }
+
+    /// Verify every attached attestation against this envelope's cert hash,
+    /// applying the registry's policy. Equivalent to
+    /// `registry.verify_all(&self.attestations, self.cert_hash()?)` but
+    /// reads as one operation at call sites.
+    pub fn verify_attestations(&self, registry: &Registry) -> Result<Vec<VerifiedAttestation>> {
+        registry.verify_all(&self.attestations, self.cert_hash()?)
+    }
+}
+
+/// SHA-256 of the cert body. The body must be a JSON object; `signatures` and
+/// `attestations` are stripped before JCS encoding (RFC 8785), so the hash is
+/// reproducible across languages and JSON libraries and is stable across
+/// countersignatures.
+pub fn cert_hash(cert: &serde_json::Value) -> Result<[u8; 32]> {
+    let mut body = cert.clone();
+    let obj = body
+        .as_object_mut()
+        .ok_or_else(|| Error::Payload("cert body must be a JSON object".to_string()))?;
+    obj.remove("signatures");
+    obj.remove("attestations");
+    let bytes = serde_jcs::to_vec(&body).map_err(|e| Error::Jcs(e.to_string()))?;
+    let mut h = Sha256::new();
+    h.update(&bytes);
+    let out = h.finalize();
+    let mut arr = [0u8; 32];
+    arr.copy_from_slice(&out);
+    Ok(arr)
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use serde_json::json;
+
+    fn bare_cert() -> serde_json::Value {
+        json!({
+            "type": CERT_TYPE,
+            "repo": "did:key:z6MkRepo",
+            "ref_name": "refs/heads/main",
+            "from": "0".repeat(64),
+            "to": "a".repeat(64),
+            "seq": 1,
+            "timestamp": "2026-01-01T00:00:00Z",
+            "nonce": "n1",
+            "signatures": [{"signer": "did:key:z6MkRepo", "sig": "abc"}]
+        })
+    }
+
+    #[test]
+    fn empty_envelope_serializes_as_bare_cert() {
+        let bare = bare_cert();
+        let env = AttestedRefUpdateCert::from_cert(&bare).unwrap();
+        let env_json: serde_json::Value =
+            serde_json::from_str(&serde_json::to_string(&env).unwrap()).unwrap();
+
+        let bare_keys: std::collections::BTreeSet<&String> =
+            bare.as_object().unwrap().keys().collect();
+        let env_keys: std::collections::BTreeSet<&String> =
+            env_json.as_object().unwrap().keys().collect();
+        assert_eq!(bare_keys, env_keys);
+    }
+
+    #[test]
+    fn bare_cert_parses_as_envelope_with_no_attestations() {
+        let bare = bare_cert();
+        let env: AttestedRefUpdateCert = serde_json::from_value(bare.clone()).unwrap();
+        assert!(env.attestations.is_empty());
+        assert_eq!(env.cert, bare);
+    }
+
+    #[test]
+    fn cert_hash_is_stable_across_countersignatures() {
+        let base_body = json!({
+            "type": CERT_TYPE,
+            "repo": "did:key:z6MkRepo",
+            "ref_name": "refs/heads/main",
+            "from": "0".repeat(64),
+            "to": "a".repeat(64),
+            "seq": 1,
+            "timestamp": "2026-01-01T00:00:00Z",
+            "nonce": "n1"
+        });
+
+        let mut one_sig = base_body.clone();
+        one_sig["signatures"] = json!([{"signer": "x", "sig": "y"}]);
+
+        let mut two_sigs = base_body.clone();
+        two_sigs["signatures"] = json!([
+            {"signer": "x", "sig": "y"},
+            {"signer": "a", "sig": "b"}
+        ]);
+
+        assert_eq!(cert_hash(&one_sig).unwrap(), cert_hash(&two_sigs).unwrap());
+    }
+
+    #[test]
+    fn cert_hash_changes_when_body_changes() {
+        let body_a = json!({
+            "type": CERT_TYPE,
+            "repo": "did:key:z6MkRepo",
+            "ref_name": "refs/heads/main",
+            "from": "0".repeat(64),
+            "to": "a".repeat(64),
+            "seq": 1,
+            "timestamp": "2026-01-01T00:00:00Z",
+            "nonce": "n1",
+            "signatures": []
+        });
+        let mut body_b = body_a.clone();
+        body_b["to"] = json!("b".repeat(64));
+
+        assert_ne!(cert_hash(&body_a).unwrap(), cert_hash(&body_b).unwrap());
+    }
+
+    #[test]
+    fn cert_hash_rejects_non_object_root() {
+        let err = cert_hash(&json!(null)).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+        let err = cert_hash(&json!([1, 2, 3])).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+        let err = cert_hash(&json!("scalar")).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    #[test]
+    fn from_cert_rejects_wrong_type() {
+        let wrong = json!({"type": "gitlawb/ref-update/v0", "repo": "did:key:z"});
+        let err = AttestedRefUpdateCert::from_cert(&wrong).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    #[test]
+    fn from_cert_rejects_missing_type() {
+        let no_type = json!({"repo": "did:key:z"});
+        let err = AttestedRefUpdateCert::from_cert(&no_type).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    #[test]
+    fn from_cert_rejects_non_object() {
+        let arr = json!([1, 2, 3]);
+        let err = AttestedRefUpdateCert::from_cert(&arr).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    #[test]
+    fn mutating_env_cert_changes_the_hash() {
+        let mut env = AttestedRefUpdateCert::from_cert(&bare_cert()).unwrap();
+        let hash_before = env.cert_hash().unwrap();
+        env.cert.as_object_mut().unwrap().insert(
+            "nonce".to_string(),
+            serde_json::Value::String("mutated".to_string()),
+        );
+        let hash_after = env.cert_hash().unwrap();
+        assert_ne!(hash_before, hash_after);
+    }
+
+    /// A cert that already carries an `attestations` field is rejected
+    /// regardless of the field's contents. Catches double-wrap (where the
+    /// inner attestations would otherwise be smuggled into `self.cert`) and
+    /// peer-supplied "pre-attested" certs that would bypass the wrapper.
+    #[test]
+    fn from_cert_rejects_preexisting_attestations_field() {
+        let mut sneaky = bare_cert();
+        sneaky["attestations"] = json!([{"smuggled": true}]);
+        let err = AttestedRefUpdateCert::from_cert(&sneaky).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+
+        // Empty array still rejected — the field's mere presence is the signal.
+        let mut empty = bare_cert();
+        empty["attestations"] = json!([]);
+        let err = AttestedRefUpdateCert::from_cert(&empty).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    /// `from_cert` on an already-wrapped envelope is the same case as
+    /// `from_cert` on a cert with a pre-existing `attestations` field: serde
+    /// flattens the envelope back into a JSON object that carries the field.
+    #[test]
+    fn from_cert_rejects_a_previously_wrapped_envelope() {
+        let mut env = AttestedRefUpdateCert::from_cert(&bare_cert()).unwrap();
+        // Inject an attestation-shaped value so the wire round-trip would
+        // actually re-emit the field.
+        env.cert
+            .as_object_mut()
+            .unwrap()
+            .insert("attestations".to_string(), json!([]));
+        let err = AttestedRefUpdateCert::from_cert(&env).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    /// `attestations: null` is explicitly not the same as missing. The
+    /// `#[serde(default)]` attribute only fills in when the key is absent —
+    /// a present-but-null wire field is rejected, which surfaces malformed
+    /// payloads early instead of silently treating them as empty.
+    #[test]
+    fn attestations_null_on_wire_is_rejected() {
+        let mut with_null = bare_cert();
+        with_null["attestations"] = serde_json::Value::Null;
+        let err = serde_json::from_value::<AttestedRefUpdateCert>(with_null).unwrap_err();
+        let msg = format!("{err}");
+        assert!(
+            msg.contains("expected a sequence") || msg.contains("invalid type"),
+            "unexpected error: {msg}"
+        );
+    }
+
+    #[test]
+    fn attestations_string_on_wire_is_rejected() {
+        let mut with_str = bare_cert();
+        with_str["attestations"] = serde_json::Value::String("oops".to_string());
+        let err = serde_json::from_value::<AttestedRefUpdateCert>(with_str).unwrap_err();
+        let msg = format!("{err}");
+        assert!(msg.contains("expected a sequence") || msg.contains("invalid type"));
+    }
+
+    /// `attach` does not deduplicate. Duplicate attestations are a verifier-
+    /// policy concern (e.g., "at most one SLSA provenance"), not a wrapper
+    /// concern. Pinning the behavior so a future deduplication change is an
+    /// intentional break.
+    #[test]
+    fn attach_does_not_deduplicate() {
+        let mut env = AttestedRefUpdateCert::from_cert(&bare_cert()).unwrap();
+        let att = Attestation {
+            type_: "demo/v1".to_string(),
+            payload: serde_json::json!({}),
+            cert_hash: "deadbeef".to_string(),
+            signer: "did:key:z6MkDup".to_string(),
+            sig: "AAAA".to_string(),
+        };
+        env.attach(att.clone());
+        env.attach(att);
+        assert_eq!(env.attestations.len(), 2);
+    }
+}

crates/gitlawb-attest/src/error.rs

@@ -0,0 +1,46 @@
+use thiserror::Error;
+
+/// Errors from building or verifying an attestation.
+#[derive(Debug, Error)]
+pub enum Error {
+    /// Discriminator failed validation (empty, whitespace, control char,
+    /// disallowed grammar).
+    #[error("attestation type: {0}")]
+    Type(String),
+
+    /// Attestation was signed against a different cert.
+    #[error("cert hash mismatch")]
+    CertHashMismatch,
+
+    /// Ed25519 signature failed verification.
+    #[error("signature: {0}")]
+    Signature(String),
+
+    /// DID could not be parsed.
+    #[error("did: {0}")]
+    Did(String),
+
+    /// Payload structure check failed, or the cert body was not a JSON object.
+    #[error("payload: {0}")]
+    Payload(String),
+
+    /// No verifier registered for the type and policy required one.
+    #[error("no verifier registered for type '{0}'")]
+    UnknownType(String),
+
+    /// `RequireAll` policy did not find an entry for a required type, or the
+    /// entry was not fully verified.
+    #[error("required attestation type missing or unverified: '{0}'")]
+    RequiredMissing(String),
+
+    /// JSON failure.
+    #[error("json: {0}")]
+    Json(#[from] serde_json::Error),
+
+    /// JCS encoding failure.
+    #[error("jcs: {0}")]
+    Jcs(String),
+}
+
+/// Crate result alias.
+pub type Result<T> = std::result::Result<T, Error>;

crates/gitlawb-attest/src/lib.rs

@@ -0,0 +1,132 @@
+//! Pluggable provenance attachments for gitlawb ref-update certs.
+//!
+//! A `gitlawb/ref-update/v1` cert proves who pushed and where a ref moved to.
+//! It does not say how the commit was produced. This crate adds an optional
+//! `attestations` field that lets any provenance system (SLSA, Sigstore,
+//! in-toto, agent runtimes) attach a typed, signed blob bound to the cert by
+//! its hash.
+//!
+//! The cert format stays additive. A cert with no attestations serializes the
+//! same bytes it does today, and existing decoders (which do not set
+//! `deny_unknown_fields`) silently drop the new `attestations` field rather
+//! than reject the cert.
+//!
+//! ## Wire shape
+//!
+//! ```json
+//! {
+//!   "type": "gitlawb/ref-update/v1",
+//!   // ...standard cert fields...,
+//!   "signatures": [...],
+//!   "attestations": [
+//!     {
+//!       "type": "covenant/exec/v1",
+//!       "payload": { /* opaque, type-specific */ },
+//!       "cert_hash": "<sha256 hex of JCS-encoded cert body>",
+//!       "signer":    "did:key:z6Mk...",
+//!       "sig":       "<base64url ed25519 over the signing input>"
+//!     }
+//!   ]
+//! }
+//! ```
+//!
+//! ## Canonical bytes
+//!
+//! Hashing and signing inputs use JCS (RFC 8785) so they reproduce across
+//! implementations regardless of struct field order or JSON library.
+//!
+//! The cert hash is `SHA-256(JCS(cert_body_without_signatures_or_attestations))`,
+//! expressed as lowercase hex on the wire. Uppercase is non-canonical and
+//! rejected on verify so the JCS signing input is uniquely determined by the
+//! cert bytes alone — there is no implicit normalization rule that
+//! cross-language signers might miss.
+//!
+//! The attestation signing input is the byte string
+//! `b"gitlawb-attest-sig/v1\n" || JCS({type, payload, cert_hash})`. The
+//! domain tag is in the byte stream, not the canonical JSON, so an attestation
+//! cannot be confused with a same-shape JCS document signed for a different
+//! protocol that uses the same Ed25519 key.
+//!
+//! ## DID:key
+//!
+//! Signers are `did:key` DIDs over Ed25519, encoded with the multibase
+//! base58btc (`z`) prefix per the W3C DID:key specification. Non-base58btc
+//! encodings of the same public key are rejected on verify so allowlists,
+//! deduplication, and signer-pinning policies that compare `signer` strings
+//! stay consistent across peers.
+//!
+//! ## Verification
+//!
+//! [`Registry`] looks up a verifier by type discriminator. [`Policy`] decides
+//! what to do when no verifier matches: `AcceptKnown` (default) lets unknown
+//! types pass without trust; `RequireAll` enforces a per-repo allowlist while
+//! still letting unrelated attached attestations through unverified (so a
+//! third-party attachment cannot DoS the cert); `RejectUnknown` rejects
+//! anything unregistered.
+//!
+//! ## Quick start
+//!
+//! ```
+//! use ed25519_dalek::SigningKey;
+//! use gitlawb_attest::{
+//!     Attestation, AttestationPayload, AttestationVerifier, AttestedRefUpdateCert,
+//!     Error, Policy, Registry, Result, CERT_TYPE,
+//! };
+//! use serde::{Deserialize, Serialize};
+//!
+//! #[derive(Serialize, Deserialize)]
+//! struct ExecPayload { agent: String }
+//! impl AttestationPayload for ExecPayload {
+//!     fn payload_type() -> &'static str { "covenant/exec/v1" }
+//! }
+//!
+//! struct ExecVerifier;
+//! impl AttestationVerifier for ExecVerifier {
+//!     fn type_(&self) -> &'static str { "covenant/exec/v1" }
+//!     fn verify_payload(&self, payload: &serde_json::Value) -> Result<()> {
+//!         payload.get("agent").and_then(|v| v.as_str())
+//!             .ok_or_else(|| Error::Payload("missing agent".into()))?;
+//!         Ok(())
+//!     }
+//! }
+//!
+//! # fn run() -> Result<()> {
+//! let cert = serde_json::json!({
+//!     "type": CERT_TYPE, "repo": "did:key:z6MkRepo",
+//!     "ref_name": "refs/heads/main",
+//!     "from": "0".repeat(64), "to": "a".repeat(64),
+//!     "seq": 1, "timestamp": "2026-01-01T00:00:00Z", "nonce": "n1",
+//!     "signatures": []
+//! });
+//! let mut env = AttestedRefUpdateCert::from_cert(&cert)?;
+//!
+//! let sk = SigningKey::from_bytes(&[7u8; 32]);
+//! let payload = ExecPayload { agent: "did:key:z6MkAgent".into() };
+//! let att = Attestation::sign(&sk, payload, env.cert_hash()?)?;
+//! env.attach(att);
+//!
+//! let mut registry = Registry::new().with_policy(Policy::RejectUnknown);
+//! registry.register(ExecVerifier);
+//! let verified = env.verify_attestations(&registry)?;
+//! assert_eq!(verified[0].type_, "covenant/exec/v1");
+//! assert!(verified[0].fully_verified);
+//! # Ok(()) }
+//! # run().unwrap();
+//! ```
+
+pub mod attestation;
+pub mod cert;
+pub mod error;
+pub mod verifier;
+
+pub use attestation::{Attestation, AttestationPayload};
+pub use cert::{cert_hash, AttestedRefUpdateCert, CERT_TYPE};
+pub use error::{Error, Result};
+pub use verifier::{AttestationVerifier, Policy, Registry, VerifiedAttestation};
+
+/// Version string for the attestation envelope wire shape.
+///
+/// Bumped only when the binding rules — JCS input shape, domain-separation
+/// tag, hash algorithm — change. Independent of [`CERT_TYPE`], which versions
+/// the underlying ref-update cert.
+pub const ATTEST_ENVELOPE_VERSION: &str = "v1";

crates/gitlawb-attest/src/verifier.rs

@@ -0,0 +1,377 @@
+//! Verifier trait, registry, and policy.
+//!
+//! A [`Registry`] maps a type discriminator to a verifier. [`Policy`] decides
+//! what happens for types nothing is registered for: accept without trust,
+//! reject, or require an allowlist.
+//!
+//! Under [`Policy::RequireAll`] the registry never short-circuits on unknown
+//! types — any attestation can be attached by any third party, so blocking
+//! the cert because an attacker added an unrelated `attacker/spam/v1` would
+//! be a denial-of-service vector. Unknown types are silently treated as
+//! `fully_verified = false`; the allowlist is enforced only by the
+//! presence-and-verified check on `required_types` after the batch runs.
+
+use std::collections::HashMap;
+
+use crate::attestation::Attestation;
+use crate::error::{Error, Result};
+
+/// Verifier for one attestation type. Implementors declare the discriminator
+/// they handle and validate the payload's shape. The signature and cert-hash
+/// binding are checked by [`Registry::verify`] before `verify_payload` runs.
+pub trait AttestationVerifier: Send + Sync {
+    /// The discriminator this verifier handles. Must be a `'static` literal
+    /// so the registry can key on it without copying.
+    fn type_(&self) -> &'static str;
+
+    /// Validate payload structure. Signature is already verified.
+    fn verify_payload(&self, payload: &serde_json::Value) -> Result<()>;
+}
+
+/// What to do for attestation types with no registered verifier.
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Default)]
+pub enum Policy {
+    /// Unknown types pass but are flagged `fully_verified = false`. Default.
+    #[default]
+    AcceptKnown,
+
+    /// Every entry in `required_types` must be present and fully verified.
+    /// Unknown types beyond the required set are still accepted unverified,
+    /// so a malicious extra attestation cannot DoS the cert.
+    RequireAll,
+
+    /// Reject every attestation whose type is not registered.
+    RejectUnknown,
+}
+
+/// Result of verifying one attestation.
+#[derive(Debug, Clone)]
+pub struct VerifiedAttestation {
+    /// Type discriminator.
+    pub type_: String,
+    /// Signer's `did:key`.
+    pub signer: String,
+    /// Lowercase SHA-256 hex of the cert body the attestation bound to.
+    pub cert_hash: String,
+    /// `true` when a verifier ran a payload check and accepted it. `false`
+    /// when the policy let an unknown type through without one.
+    pub fully_verified: bool,
+}
+
+/// Verifiers keyed by type discriminator.
+#[derive(Default)]
+pub struct Registry {
+    by_type: HashMap<&'static str, Box<dyn AttestationVerifier>>,
+    policy: Policy,
+    required_types: Vec<String>,
+}
+
+impl Registry {
+    /// Empty registry with the default policy.
+    pub fn new() -> Self {
+        Self::default()
+    }
+
+    /// Register a verifier by value. Returns the prior verifier for the same
+    /// type, if any, so callers can detect double-registration.
+    pub fn register<V: AttestationVerifier + 'static>(
+        &mut self,
+        verifier: V,
+    ) -> Option<Box<dyn AttestationVerifier>> {
+        self.register_boxed(Box::new(verifier))
+    }
+
+    /// Like [`Self::register`] but takes an already-boxed trait object — useful
+    /// when verifiers are constructed dynamically.
+    pub fn register_boxed(
+        &mut self,
+        verifier: Box<dyn AttestationVerifier>,
+    ) -> Option<Box<dyn AttestationVerifier>> {
+        let key = verifier.type_();
+        self.by_type.insert(key, verifier)
+    }
+
+    /// Switch policy.
+    pub fn with_policy(mut self, policy: Policy) -> Self {
+        self.policy = policy;
+        self
+    }
+
+    /// Type discriminators that must be present and verified under
+    /// `Policy::RequireAll`. Ignored under other policies.
+    pub fn require_types<I, S>(mut self, types: I) -> Self
+    where
+        I: IntoIterator<Item = S>,
+        S: Into<String>,
+    {
+        self.required_types = types.into_iter().map(Into::into).collect();
+        self
+    }
+
+    /// Active policy.
+    pub fn policy(&self) -> Policy {
+        self.policy
+    }
+
+    /// Verify signature, cert-hash binding, and (if a verifier is registered)
+    /// payload structure. Under `RequireAll` this is lenient on unknown types
+    /// — see the module docstring.
+    pub fn verify(
+        &self,
+        attestation: &Attestation,
+        expected_cert_hash: [u8; 32],
+    ) -> Result<VerifiedAttestation> {
+        attestation.verify_signature(expected_cert_hash)?;
+
+        let fully = match self.by_type.get(attestation.type_.as_str()) {
+            Some(v) => {
+                v.verify_payload(&attestation.payload)?;
+                true
+            }
+            None => match self.policy {
+                Policy::AcceptKnown | Policy::RequireAll => false,
+                Policy::RejectUnknown => {
+                    return Err(Error::UnknownType(attestation.type_.clone()));
+                }
+            },
+        };
+
+        Ok(VerifiedAttestation {
+            type_: attestation.type_.clone(),
+            signer: attestation.signer.clone(),
+            cert_hash: attestation.cert_hash.clone(),
+            fully_verified: fully,
+        })
+    }
+
+    /// Verify a batch, then enforce `RequireAll`.
+    pub fn verify_all(
+        &self,
+        attestations: &[Attestation],
+        expected_cert_hash: [u8; 32],
+    ) -> Result<Vec<VerifiedAttestation>> {
+        let mut verified = Vec::with_capacity(attestations.len());
+        for a in attestations {
+            verified.push(self.verify(a, expected_cert_hash)?);
+        }
+        if self.policy == Policy::RequireAll {
+            for required in &self.required_types {
+                let present = verified
+                    .iter()
+                    .any(|v| &v.type_ == required && v.fully_verified);
+                if !present {
+                    return Err(Error::RequiredMissing(required.clone()));
+                }
+            }
+        }
+        Ok(verified)
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::attestation::{Attestation, AttestationPayload};
+    use ed25519_dalek::SigningKey;
+    use rand::rngs::OsRng;
+    use serde::{Deserialize, Serialize};
+
+    fn fresh() -> SigningKey {
+        SigningKey::generate(&mut OsRng)
+    }
+
+    #[derive(Serialize, Deserialize)]
+    struct Demo {
+        a: String,
+    }
+    impl AttestationPayload for Demo {
+        fn payload_type() -> &'static str {
+            "demo/v1"
+        }
+    }
+
+    struct DemoVerifier;
+    impl AttestationVerifier for DemoVerifier {
+        fn type_(&self) -> &'static str {
+            "demo/v1"
+        }
+        fn verify_payload(&self, payload: &serde_json::Value) -> Result<()> {
+            payload
+                .get("a")
+                .and_then(|v| v.as_str())
+                .filter(|s| !s.is_empty())
+                .map(|_| ())
+                .ok_or_else(|| Error::Payload("missing or empty 'a'".to_string()))
+        }
+    }
+
+    /// A second verifier that has the same discriminator as `DemoVerifier` —
+    /// used to test last-wins on `register`.
+    struct DemoVerifierAlt;
+    impl AttestationVerifier for DemoVerifierAlt {
+        fn type_(&self) -> &'static str {
+            "demo/v1"
+        }
+        fn verify_payload(&self, _payload: &serde_json::Value) -> Result<()> {
+            Err(Error::Payload("alt always rejects".to_string()))
+        }
+    }
+
+    #[derive(Serialize, Deserialize)]
+    struct Other {
+        x: u32,
+    }
+    impl AttestationPayload for Other {
+        fn payload_type() -> &'static str {
+            "other/v1"
+        }
+    }
+
+    fn sample_hash() -> [u8; 32] {
+        let mut h = [0u8; 32];
+        for (i, b) in h.iter_mut().enumerate() {
+            *b = (i + 1) as u8;
+        }
+        h
+    }
+
+    fn signed_demo(sk: &SigningKey, cert_hash: [u8; 32], a: &str) -> Attestation {
+        Attestation::sign(sk, Demo { a: a.to_string() }, cert_hash).unwrap()
+    }
+
+    fn signed_other(sk: &SigningKey, cert_hash: [u8; 32], x: u32) -> Attestation {
+        Attestation::sign(sk, Other { x }, cert_hash).unwrap()
+    }
+
+    #[test]
+    fn registry_accepts_registered_type() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let mut reg = Registry::new();
+        reg.register(DemoVerifier);
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let v = reg.verify(&att, cert_hash).unwrap();
+        assert!(v.fully_verified);
+        assert_eq!(v.type_, "demo/v1");
+        assert_eq!(v.cert_hash, hex::encode(cert_hash));
+    }
+
+    #[test]
+    fn accept_known_lets_unknown_pass_unverified() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let reg = Registry::new().with_policy(Policy::AcceptKnown);
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let v = reg.verify(&att, cert_hash).unwrap();
+        assert!(!v.fully_verified);
+    }
+
+    #[test]
+    fn reject_unknown_blocks_unregistered_types() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let reg = Registry::new().with_policy(Policy::RejectUnknown);
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let err = reg.verify(&att, cert_hash).unwrap_err();
+        assert!(matches!(err, Error::UnknownType(_)));
+    }
+
+    #[test]
+    fn require_all_enforces_presence() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let mut reg = Registry::new()
+            .with_policy(Policy::RequireAll)
+            .require_types(["demo/v1"]);
+        reg.register(DemoVerifier);
+
+        let err = reg.verify_all(&[], cert_hash).unwrap_err();
+        assert!(matches!(err, Error::RequiredMissing(t) if t == "demo/v1"));
+
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let v = reg.verify_all(&[att], cert_hash).unwrap();
+        assert_eq!(v.len(), 1);
+    }
+
+    /// Even when a junk attestation of an unrelated type is attached first, a
+    /// `RequireAll` registry must still accept the cert as long as the
+    /// required type is present and fully verified — the attacker shouldn't
+    /// be able to DoS the cert by attaching `attacker/spam/v1` before
+    /// `covenant/exec/v1`.
+    #[test]
+    fn require_all_is_lenient_on_unknown_types_in_the_batch() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let mut reg = Registry::new()
+            .with_policy(Policy::RequireAll)
+            .require_types(["demo/v1"]);
+        reg.register(DemoVerifier);
+
+        let spam = signed_other(&sk, cert_hash, 7);
+        let real = signed_demo(&sk, cert_hash, "ok");
+        let verified = reg.verify_all(&[spam, real], cert_hash).unwrap();
+        assert_eq!(verified.len(), 2);
+        assert!(verified
+            .iter()
+            .any(|v| v.type_ == "demo/v1" && v.fully_verified));
+        assert!(verified
+            .iter()
+            .any(|v| v.type_ == "other/v1" && !v.fully_verified));
+    }
+
+    /// A required type that is present but unverified (no verifier registered
+    /// even though the type appears in `required_types`) must fail
+    /// `verify_all` with `RequiredMissing`. Catches a misconfiguration where
+    /// the operator listed a type but forgot to register a verifier.
+    #[test]
+    fn require_all_rejects_present_but_unverified_required_type() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let reg = Registry::new()
+            .with_policy(Policy::RequireAll)
+            .require_types(["demo/v1"]); // type listed, but no verifier registered.
+
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let err = reg.verify_all(&[att], cert_hash).unwrap_err();
+        assert!(matches!(err, Error::RequiredMissing(t) if t == "demo/v1"));
+    }
+
+    #[test]
+    fn payload_check_failure_rejects() {
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let mut reg = Registry::new();
+        reg.register(DemoVerifier);
+        // Sign an empty `a` so the signature verifies but the payload check fails.
+        let att = Attestation::sign(&sk, Demo { a: String::new() }, cert_hash).unwrap();
+        let err = reg.verify(&att, cert_hash).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+
+    /// `RequireAll` with an empty allowlist degenerates to "no required types
+    /// to check" — the loop over `required_types` is a no-op, so an empty
+    /// batch verifies successfully. Pinned so operators relying on the empty
+    /// allowlist as a default-permissive RequireAll see consistent behavior.
+    #[test]
+    fn require_all_with_empty_allowlist_and_empty_batch_succeeds() {
+        let reg = Registry::new().with_policy(Policy::RequireAll);
+        let verified = reg.verify_all(&[], sample_hash()).unwrap();
+        assert!(verified.is_empty());
+    }
+
+    #[test]
+    fn register_returns_the_prior_verifier_on_double_register() {
+        let mut reg = Registry::new();
+        assert!(reg.register(DemoVerifier).is_none());
+        let prior = reg.register(DemoVerifierAlt);
+        let prior = prior.expect("second register must return the previous verifier");
+        assert_eq!(prior.type_(), "demo/v1");
+
+        // Last-wins semantics confirmed by behavior.
+        let sk = fresh();
+        let cert_hash = sample_hash();
+        let att = signed_demo(&sk, cert_hash, "ok");
+        let err = reg.verify(&att, cert_hash).unwrap_err();
+        assert!(matches!(err, Error::Payload(_)));
+    }
+}

crates/gitlawb-attest/tests/canonical_vectors.rs

@@ -0,0 +1,150 @@
+//! Canonical test vectors.
+//!
+//! Ed25519 signatures are deterministic (RFC 8032). JCS canonicalization is
+//! deterministic (RFC 8785). SHA-256 is deterministic. Given fixed inputs the
+//! cert hash, signature, signer DID, and full wire JSON are therefore exactly
+//! reproducible across implementations. This file pins those values so a
+//! port to Go, JS, Python, or any other language has a concrete oracle to
+//! check against without reading Rust.
+//!
+//! If a vector changes, that is a wire-protocol break. The change is either
+//! intentional (bump `ATTEST_ENVELOPE_VERSION` and document the migration) or
+//! a regression that broke interoperability with every other implementation.
+
+use ed25519_dalek::SigningKey;
+use gitlawb_attest::{Attestation, AttestationPayload, AttestedRefUpdateCert, Registry, CERT_TYPE};
+use serde::{Deserialize, Serialize};
+
+/// Fixed seed for the attestation signer. Real signers use a CSPRNG; this is a
+/// test-vector convention only.
+const SIGNER_SEED: [u8; 32] = [
+    0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef, 0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10,
+    0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff,
+];
+
+/// Fixed cert body for the vectors. Mirrors the field layout of a
+/// `gitlawb-core::cert::RefUpdateBody` plus a `signatures` array. The
+/// signatures array is deliberately non-empty to test that it is stripped
+/// before hashing.
+fn fixture_cert_body() -> serde_json::Value {
+    serde_json::json!({
+        "type": CERT_TYPE,
+        "repo": "did:key:z6MkpYqTAt8jq3SExeUiVdyTrDdocy9j2NjGxFE6S6ZBh1Yt",
+        "ref_name": "refs/heads/main",
+        "from": "0000000000000000000000000000000000000000000000000000000000000000",
+        "to": "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
+        "seq": 1,
+        "timestamp": "2026-01-01T00:00:00Z",
+        "nonce": "vector-nonce-1",
+        "signatures": [
+            {"signer": "did:key:z6MkpYqTAt8jq3SExeUiVdyTrDdocy9j2NjGxFE6S6ZBh1Yt", "sig": "ignored"}
+        ]
+    })
+}
+
+/// Fixed attestation payload. Shape mirrors what Covenant's runtime would
+/// produce for a `covenant/exec/v1` attestation.
+#[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
+struct ExecPayload {
+    agent: String,
+    capability: String,
+    sandbox_digest: String,
+}
+
+impl AttestationPayload for ExecPayload {
+    fn payload_type() -> &'static str {
+        "covenant/exec/v1"
+    }
+}
+
+fn fixture_payload() -> ExecPayload {
+    ExecPayload {
+        agent: "did:key:z6MkAgentTestVector".to_string(),
+        capability: "code.write+sandbox.exec".to_string(),
+        sandbox_digest: "sha256:c0ffee".to_string(),
+    }
+}
+
+/// The expected lowercase-hex SHA-256 of `JCS(cert_body \ {signatures})`.
+/// Any port that produces a different value is not JCS-canonicalizing the
+/// same way (likely culprits: key ordering, integer or string escaping).
+const EXPECTED_CERT_HASH_HEX: &str =
+    "5898d7c7a7d32a5faaaf9a52bfc92e0eff98027554adeefba0c575816f43ce56";
+
+/// The expected `did:key` of the signer derived from `SIGNER_SEED`. Any port
+/// that produces a different value has a multibase or multicodec encoding bug.
+const EXPECTED_SIGNER_DID: &str = "did:key:z6MkqkKY69DYo23W4YFDoCNgjr7cMvmJqHtJVoQkEzrbaopZ";
+
+/// The expected base64url-no-pad Ed25519 signature over
+/// `b"gitlawb-attest-sig/v1\n" || JCS({type, payload, cert_hash})`. Any port
+/// that produces a different value is missing the domain tag, JCS-encoding
+/// the input differently, or using a different Ed25519 implementation.
+const EXPECTED_SIGNATURE_B64URL: &str =
+    "4L3ONbhrksB9pn--u86lMeAdePSiZZplAsxuN2Cy6vgI30ndle7gDUVuoGRJr4Ylhz7ipQvUzXaDTvZGFLPXBQ";
+
+#[test]
+fn cert_hash_is_deterministic_from_jcs() {
+    let env = AttestedRefUpdateCert::from_cert(&fixture_cert_body()).unwrap();
+    let actual_hex = hex::encode(env.cert_hash().unwrap());
+    assert_eq!(
+        actual_hex, EXPECTED_CERT_HASH_HEX,
+        "cert hash drifted — JCS encoding or hash algorithm changed",
+    );
+}
+
+#[test]
+fn signer_did_is_deterministic_from_seed() {
+    let sk = SigningKey::from_bytes(&SIGNER_SEED);
+    let env = AttestedRefUpdateCert::from_cert(&fixture_cert_body()).unwrap();
+    let cert_hash = env.cert_hash().unwrap();
+    let att = Attestation::sign(&sk, fixture_payload(), cert_hash).unwrap();
+    assert_eq!(
+        att.signer, EXPECTED_SIGNER_DID,
+        "signer DID drifted — multibase or multicodec encoding changed",
+    );
+}
+
+#[test]
+fn attestation_signature_is_deterministic() {
+    let sk = SigningKey::from_bytes(&SIGNER_SEED);
+    let env = AttestedRefUpdateCert::from_cert(&fixture_cert_body()).unwrap();
+    let cert_hash = env.cert_hash().unwrap();
+    let att = Attestation::sign(&sk, fixture_payload(), cert_hash).unwrap();
+    assert_eq!(
+        att.sig, EXPECTED_SIGNATURE_B64URL,
+        "signature drifted — domain tag, JCS shape, or Ed25519 implementation changed",
+    );
+}
+
+#[test]
+fn vector_attestation_verifies_through_the_public_api() {
+    // Round-trip the entire pipeline using only the public API on the fixed
+    // vectors. A non-Rust implementor should be able to:
+    //   1. Compute cert_hash and check against EXPECTED_CERT_HASH_HEX.
+    //   2. Derive signer DID and check against EXPECTED_SIGNER_DID.
+    //   3. Sign a payload identical to fixture_payload() and check against
+    //      EXPECTED_SIGNATURE_B64URL.
+    //   4. Reconstruct the wire envelope and verify it round-trips.
+    let sk = SigningKey::from_bytes(&SIGNER_SEED);
+    let mut env = AttestedRefUpdateCert::from_cert(&fixture_cert_body()).unwrap();
+    let cert_hash = env.cert_hash().unwrap();
+    let att = Attestation::sign(&sk, fixture_payload(), cert_hash).unwrap();
+    env.attach(att);
+
+    let wire = serde_json::to_string(&env).unwrap();
+    let back: AttestedRefUpdateCert = serde_json::from_str(&wire).unwrap();
+    assert_eq!(back.attestations.len(), 1);
+    assert_eq!(back.attestations[0].sig, EXPECTED_SIGNATURE_B64URL);
+
+    let recovered = back.attestations[0]
+        .verify_signature(back.cert_hash().unwrap())
+        .unwrap();
+    assert_eq!(recovered.to_bytes(), sk.verifying_key().to_bytes());
+
+    // And through a registry, with the convenience method.
+    let reg = Registry::new();
+    let verified = back.verify_attestations(&reg).unwrap();
+    assert_eq!(verified.len(), 1);
+    assert_eq!(verified[0].cert_hash, EXPECTED_CERT_HASH_HEX);
+    assert_eq!(verified[0].signer, EXPECTED_SIGNER_DID);
+}

crates/gitlawb-attest/tests/with_gitlawb_core.rs

@@ -0,0 +1,251 @@
+//! End-to-end integration with `gitlawb-core`.
+//!
+//! Proves the attest envelope composes with the real `RefUpdateCert` from
+//! `gitlawb-core`: a cert built and signed through the core API wraps cleanly,
+//! survives signing and verifying an attestation, and round-trips back to a
+//! `RefUpdateCert` that core still verifies. None of this is exercised by the
+//! unit tests in `cert.rs`, which use hand-written JSON literals to keep the
+//! crate's runtime deps minimal.
+
+use ed25519_dalek::SigningKey;
+use gitlawb_attest::{
+    Attestation, AttestationPayload, AttestationVerifier, AttestedRefUpdateCert, Error, Policy,
+    Registry, Result as AttestResult,
+};
+use gitlawb_core::cert::RefUpdateCert;
+use gitlawb_core::identity::Keypair;
+use rand::rngs::OsRng;
+use serde::{Deserialize, Serialize};
+
+fn zero_hash() -> String {
+    "0".repeat(64)
+}
+
+fn commit_hash(c: char) -> String {
+    c.to_string().repeat(64)
+}
+
+fn fresh_signing_key() -> SigningKey {
+    SigningKey::generate(&mut OsRng)
+}
+
+#[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
+struct CovenantExecPayload {
+    agent: String,
+    capability: String,
+    sandbox_digest: String,
+}
+
+impl AttestationPayload for CovenantExecPayload {
+    fn payload_type() -> &'static str {
+        "covenant/exec/v1"
+    }
+}
+
+struct CovenantExecVerifier;
+
+impl AttestationVerifier for CovenantExecVerifier {
+    fn type_(&self) -> &'static str {
+        "covenant/exec/v1"
+    }
+
+    fn verify_payload(&self, payload: &serde_json::Value) -> AttestResult<()> {
+        for field in ["agent", "capability", "sandbox_digest"] {
+            payload
+                .get(field)
+                .and_then(|v| v.as_str())
+                .filter(|s| !s.is_empty())
+                .ok_or_else(|| Error::Payload(format!("missing or empty '{field}'")))?;
+        }
+        Ok(())
+    }
+}
+
+#[test]
+fn wraps_real_cert_signs_and_verifies_attestation_then_unwraps_cleanly() {
+    // 1. Build a real cert through gitlawb-core. The pusher is the repo owner
+    //    in this minimal setup; the cert is single-signature.
+    let pusher = Keypair::generate();
+    let repo_did = pusher.did();
+    let cert = RefUpdateCert::new(
+        repo_did,
+        "refs/heads/main".to_string(),
+        zero_hash(),
+        commit_hash('a'),
+        1,
+        &pusher,
+    )
+    .unwrap();
+    cert.validate_structure().unwrap();
+    let valid_signers = cert.verify_all().unwrap();
+    assert_eq!(valid_signers.len(), 1);
+
+    // 2. Wrap. With no attestations attached the envelope is byte-identical to
+    //    the underlying cert — that's the additive-on-the-wire promise.
+    let cert_json = serde_json::to_value(&cert).unwrap();
+    let mut env = AttestedRefUpdateCert::from_cert(&cert).unwrap();
+    assert_eq!(
+        serde_json::to_value(&env).unwrap(),
+        cert_json,
+        "empty envelope must serialize as the bare cert"
+    );
+
+    // 3. A separate party (here, an agent runtime) attests to how the commit
+    //    was produced. The attestation signer is intentionally not the cert
+    //    pusher: trust in the attestation is evaluated independently of trust
+    //    in the push.
+    let agent_signer = fresh_signing_key();
+    let payload = CovenantExecPayload {
+        agent: "did:key:z6MkAgent".to_string(),
+        capability: "code.write+sandbox.exec".to_string(),
+        sandbox_digest: "sha256:c0ffee".to_string(),
+    };
+    let cert_hash = env.cert_hash().unwrap();
+    let attestation = Attestation::sign(&agent_signer, payload.clone(), cert_hash).unwrap();
+    env.attach(attestation);
+
+    // 4. Verify through a registry that knows `covenant/exec/v1`. Strict
+    //    policy so an unknown discriminator would have been rejected.
+    let mut registry = Registry::new().with_policy(Policy::RejectUnknown);
+    registry.register(CovenantExecVerifier);
+    let verified = registry
+        .verify_all(&env.attestations, env.cert_hash().unwrap())
+        .unwrap();
+    assert_eq!(verified.len(), 1);
+    assert!(verified[0].fully_verified);
+    assert_eq!(verified[0].type_, "covenant/exec/v1");
+    assert_eq!(verified[0].cert_hash, hex::encode(cert_hash));
+
+    // 5. Round-trip through JSON and back. The wrapped cert with one
+    //    attestation must parse back into the same envelope, and stripping
+    //    the attestations must yield a `RefUpdateCert` core still verifies.
+    let on_wire = serde_json::to_string(&env).unwrap();
+    let back: AttestedRefUpdateCert = serde_json::from_str(&on_wire).unwrap();
+    assert_eq!(back.attestations.len(), 1);
+    assert_eq!(
+        back.attestations[0]
+            .payload_as::<CovenantExecPayload>()
+            .unwrap(),
+        payload
+    );
+
+    let mut unwrapped = back.cert.clone();
+    if let Some(obj) = unwrapped.as_object_mut() {
+        obj.remove("attestations");
+    }
+    let unwrapped_cert: RefUpdateCert = serde_json::from_value(unwrapped).unwrap();
+    let revalidated = unwrapped_cert.verify_all().unwrap();
+    assert_eq!(revalidated, valid_signers);
+}
+
+#[test]
+fn cert_hash_is_stable_when_a_maintainer_countersigns() {
+    // The cert hash strips `signatures` before hashing, so countersignatures
+    // added after an attestation is signed must not invalidate the
+    // attestation's binding.
+    let pusher = Keypair::generate();
+    let maintainer = Keypair::generate();
+    let mut cert = RefUpdateCert::new(
+        pusher.did(),
+        "refs/heads/main".to_string(),
+        zero_hash(),
+        commit_hash('b'),
+        7,
+        &pusher,
+    )
+    .unwrap();
+
+    let env_before = AttestedRefUpdateCert::from_cert(&cert).unwrap();
+    let hash_before = env_before.cert_hash().unwrap();
+
+    cert.countersign(&maintainer).unwrap();
+    let env_after = AttestedRefUpdateCert::from_cert(&cert).unwrap();
+    let hash_after = env_after.cert_hash().unwrap();
+
+    assert_eq!(
+        hash_before, hash_after,
+        "cert hash must be stable across countersignatures"
+    );
+
+    // An attestation signed against the pre-countersign hash still verifies
+    // against the post-countersign cert.
+    let agent = fresh_signing_key();
+    let payload = CovenantExecPayload {
+        agent: "did:key:z6MkAgent2".to_string(),
+        capability: "code.write".to_string(),
+        sandbox_digest: "sha256:deadbeef".to_string(),
+    };
+    let attestation = Attestation::sign(&agent, payload, hash_before).unwrap();
+    attestation.verify_signature(hash_after).unwrap();
+}
+
+#[test]
+fn cross_cert_replay_is_rejected_against_a_real_cert() {
+    // Negative case: an attestation signed for one cert must not verify on a
+    // different cert built through the core API.
+    let pusher = Keypair::generate();
+    let cert_a = RefUpdateCert::new(
+        pusher.did(),
+        "refs/heads/main".to_string(),
+        zero_hash(),
+        commit_hash('a'),
+        1,
+        &pusher,
+    )
+    .unwrap();
+    let cert_b = RefUpdateCert::new(
+        pusher.did(),
+        "refs/heads/main".to_string(),
+        commit_hash('a'),
+        commit_hash('b'),
+        2,
+        &pusher,
+    )
+    .unwrap();
+
+    let env_a = AttestedRefUpdateCert::from_cert(&cert_a).unwrap();
+    let env_b = AttestedRefUpdateCert::from_cert(&cert_b).unwrap();
+    let hash_a = env_a.cert_hash().unwrap();
+    let hash_b = env_b.cert_hash().unwrap();
+    assert_ne!(hash_a, hash_b);
+
+    let agent = fresh_signing_key();
+    let payload = CovenantExecPayload {
+        agent: "did:key:z6MkAgent3".to_string(),
+        capability: "code.write".to_string(),
+        sandbox_digest: "sha256:cafe".to_string(),
+    };
+    let attestation = Attestation::sign(&agent, payload, hash_a).unwrap();
+    let err = attestation.verify_signature(hash_b).unwrap_err();
+    assert!(matches!(err, Error::CertHashMismatch));
+}
+
+/// A cert deserialized from JSON and a cert built through the core API must
+/// hash identically. JCS canonicalization is what makes the additive-on-wire
+/// promise hold across the serialize/deserialize boundary — without it, the
+/// hash would depend on which side built the `serde_json::Value`.
+#[test]
+fn cert_hash_is_identical_across_the_deserialize_boundary() {
+    let pusher = Keypair::generate();
+    let cert = RefUpdateCert::new(
+        pusher.did(),
+        "refs/heads/main".to_string(),
+        zero_hash(),
+        commit_hash('c'),
+        9,
+        &pusher,
+    )
+    .unwrap();
+
+    let direct_hash = AttestedRefUpdateCert::from_cert(&cert)
+        .unwrap()
+        .cert_hash()
+        .unwrap();
+
+    let wire = serde_json::to_string(&cert).unwrap();
+    let parsed_value: serde_json::Value = serde_json::from_str(&wire).unwrap();
+    let parsed_env: AttestedRefUpdateCert = serde_json::from_value(parsed_value).unwrap();
+    let parsed_hash = parsed_env.cert_hash().unwrap();
+
+    assert_eq!(direct_hash, parsed_hash);
+}

crates/gitlawb-core/Cargo.toml

@@ -1,8 +1,9 @@
 [package]
 name = "gitlawb-core"
 description = "Core cryptographic primitives for the gitlawb network: DIDs, CIDs, UCAN, HTTP Signatures, ref-update certificates"
-version.workspace = true
+version = "0.5.1" # x-release-please-version
 edition.workspace = true
+rust-version.workspace = true
 license.workspace = true
 
 [dependencies]
@@ -23,6 +24,9 @@ chrono = { workspace = true }
 uuid = { workspace = true }
 zeroize = { version = "1", features = ["derive"] }
 pkcs8 = { version = "0.10", features = ["pem", "std"] }
+curve25519-dalek = "4"
+crypto_box = { version = "0.9", features = ["std", "chacha20"] }
+chacha20poly1305 = "0.10"
 
 [dev-dependencies]
 tokio = { workspace = true }

crates/gitlawb-core/src/cert.rs

@@ -10,9 +10,9 @@ use chrono::{DateTime, Utc};
 use serde::{Deserialize, Serialize};
 use uuid::Uuid;
 
-use crate::{Error, Result};
 use crate::did::Did;
-use crate::identity::{Keypair, verify};
+use crate::identity::{verify, Keypair};
+use crate::{Error, Result};
 
 /// The certificate type discriminant. Always `"gitlawb/ref-update/v1"`.
 pub const CERT_TYPE: &str = "gitlawb/ref-update/v1";
@@ -110,7 +110,7 @@ impl RefUpdateCert {
     ///
     /// Returns the list of DIDs whose signatures are valid.
     pub fn verify_all(&self) -> Result<Vec<Did>> {
-        use base64::{Engine, engine::general_purpose::URL_SAFE_NO_PAD};
+        use base64::{engine::general_purpose::URL_SAFE_NO_PAD, Engine};
         let signing_bytes = self.body.to_signing_bytes()?;
         let mut valid = Vec::new();
 
@@ -118,10 +118,12 @@ impl RefUpdateCert {
             // Resolve the verifying key from the DID
             let vk = cert_sig.signer.to_verifying_key()?;
 
-            let sig_bytes_vec = URL_SAFE_NO_PAD.decode(&cert_sig.sig)
+            let sig_bytes_vec = URL_SAFE_NO_PAD
+                .decode(&cert_sig.sig)
                 .map_err(|e| Error::RefCert(format!("invalid base64 sig: {e}")))?;
 
-            let sig_bytes: [u8; 64] = sig_bytes_vec.try_into()
+            let sig_bytes: [u8; 64] = sig_bytes_vec
+                .try_into()
                 .map_err(|_| Error::RefCert("signature must be 64 bytes".to_string()))?;
 
             verify(&vk, &signing_bytes, &sig_bytes)?;
@@ -133,11 +135,7 @@ impl RefUpdateCert {
 
     /// Check if this certificate satisfies a threshold of valid signatures
     /// from the provided set of authorized maintainer DIDs.
-    pub fn satisfies_threshold(
-        &self,
-        maintainers: &[Did],
-        threshold: usize,
-    ) -> Result<bool> {
+    pub fn satisfies_threshold(&self, maintainers: &[Did], threshold: usize) -> Result<bool> {
         let valid = self.verify_all()?;
         let count = valid.iter().filter(|d| maintainers.contains(d)).count();
         Ok(count >= threshold)
@@ -187,7 +185,8 @@ mod tests {
             dummy_hash('a'),
             1,
             &kp,
-        ).unwrap();
+        )
+        .unwrap();
 
         cert.validate_structure().unwrap();
         let valid = cert.verify_all().unwrap();
@@ -208,7 +207,8 @@ mod tests {
             dummy_hash('a'),
             1,
             &kp1,
-        ).unwrap();
+        )
+        .unwrap();
 
         cert.countersign(&kp2).unwrap();
         let valid = cert.verify_all().unwrap();
@@ -228,7 +228,8 @@ mod tests {
             dummy_hash('a'),
             1,
             &kp1,
-        ).unwrap();
+        )
+        .unwrap();
         cert.countersign(&kp2).unwrap();
 
         let maintainers = vec![kp1.did(), kp2.did()];
@@ -246,7 +247,8 @@ mod tests {
             dummy_hash('b'),
             42,
             &kp,
-        ).unwrap();
+        )
+        .unwrap();
 
         let json = serde_json::to_string_pretty(&cert).unwrap();
         assert!(json.contains("gitlawb/ref-update/v1"));
@@ -255,4 +257,105 @@ mod tests {
         // Round-trip
         let _: RefUpdateCert = serde_json::from_str(&json).unwrap();
     }
+
+    #[test]
+    fn validate_structure_rejects_wrong_cert_type() {
+        let kp = Keypair::generate();
+        let mut cert = RefUpdateCert::new(
+            kp.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp,
+        )
+        .unwrap();
+        cert.body.type_ = "gitlawb/ref-update/v0".to_string();
+        assert!(cert.validate_structure().is_err());
+    }
+
+    #[test]
+    fn validate_structure_rejects_invalid_to_hash() {
+        let kp = Keypair::generate();
+        let mut cert = RefUpdateCert::new(
+            kp.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp,
+        )
+        .unwrap();
+        cert.body.to = "not-a-valid-sha256".to_string();
+        assert!(cert.validate_structure().is_err());
+    }
+
+    #[test]
+    fn validate_structure_rejects_empty_signatures() {
+        let kp = Keypair::generate();
+        let mut cert = RefUpdateCert::new(
+            kp.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp,
+        )
+        .unwrap();
+        cert.signatures.clear();
+        assert!(cert.validate_structure().is_err());
+    }
+
+    #[test]
+    fn tampered_signature_fails_verify_all() {
+        let kp = Keypair::generate();
+        let kp2 = Keypair::generate();
+        let mut cert = RefUpdateCert::new(
+            kp.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp,
+        )
+        .unwrap();
+        // Replace kp's signature with a signature from kp2 over different bytes.
+        // The signer DID still points to kp, so verification must fail.
+        cert.signatures[0].sig = kp2.sign_b64(b"unrelated bytes");
+        assert!(cert.verify_all().is_err());
+    }
+
+    #[test]
+    fn threshold_not_met_when_signer_outside_maintainer_list() {
+        let kp_pusher = Keypair::generate();
+        let kp_maintainer = Keypair::generate();
+
+        let cert = RefUpdateCert::new(
+            kp_pusher.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp_pusher,
+        )
+        .unwrap();
+
+        let maintainers = vec![kp_maintainer.did()];
+        assert!(!cert.satisfies_threshold(&maintainers, 1).unwrap());
+    }
+
+    #[test]
+    fn threshold_zero_is_always_satisfied() {
+        let kp = Keypair::generate();
+        let cert = RefUpdateCert::new(
+            kp.did(),
+            "refs/heads/main".to_string(),
+            dummy_hash('0'),
+            dummy_hash('a'),
+            1,
+            &kp,
+        )
+        .unwrap();
+        assert!(cert.satisfies_threshold(&[], 0).unwrap());
+    }
 }

crates/gitlawb-core/src/cid.rs

@@ -11,7 +11,7 @@
 use cid::CidGeneric;
 use multihash_codetable::{Code, MultihashDigest};
 use serde::{Deserialize, Serialize};
-use sha2::{Sha256, Digest};
+use sha2::{Digest, Sha256};
 use std::fmt;
 
 use crate::{Error, Result};
@@ -64,6 +64,19 @@ impl Cid {
     }
 }
 
+/// True when `s` parses as a CIDv1 with the raw codec — the exact shape
+/// [`Cid::from_git_object_bytes`] produces and the `/ipfs` resolver looks up.
+/// A legacy provider CID (Kubo dag-pb, Pinata CIDv0) parses to a different
+/// version or codec and returns `false`, marking it an opportunistic-repair
+/// candidate. Decidable from the string alone (no object bytes), so the pin path
+/// can gate the byte-read/recompute cost on it and leave non-legacy rows at the
+/// existing DB-only skip cost. An unparseable string is non-canonical (`false`).
+pub fn is_raw_cidv1(s: &str) -> bool {
+    s.parse::<CidGeneric<64>>()
+        .map(|c| c.version() == cid::Version::V1 && c.codec() == RAW)
+        .unwrap_or(false)
+}
+
 impl fmt::Display for Cid {
     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         write!(f, "{}", self.0)
@@ -87,9 +100,9 @@ pub fn sha256_bytes(bytes: &[u8]) -> [u8; 32] {
 
 /// Parse a 64-character hex SHA-256 string into raw bytes.
 pub fn sha256_hex_to_bytes(hex_str: &str) -> Result<[u8; 32]> {
-    let bytes = hex::decode(hex_str)
-        .map_err(|e| Error::InvalidCid(format!("invalid hex: {e}")))?;
-    bytes.try_into()
+    let bytes = hex::decode(hex_str).map_err(|e| Error::InvalidCid(format!("invalid hex: {e}")))?;
+    bytes
+        .try_into()
         .map_err(|_| Error::InvalidCid("sha256 hash must be 32 bytes (64 hex chars)".to_string()))
 }
 
@@ -110,7 +123,10 @@ mod tests {
         // CIDv1 base32 strings start with 'b'
         let data = b"blob 13\0hello gitlawb";
         let c = Cid::from_git_object_bytes(data);
-        assert!(c.to_string().starts_with('b'), "CIDv1 should be base32 (starts with 'b')");
+        assert!(
+            c.to_string().starts_with('b'),
+            "CIDv1 should be base32 (starts with 'b')"
+        );
     }
 
     #[test]
@@ -126,4 +142,93 @@ mod tests {
         let bytes = sha256_hex_to_bytes(&hex).unwrap();
         assert_eq!(sha256_bytes(data), bytes);
     }
+
+    #[test]
+    fn from_sha256_bytes_matches_object_bytes() {
+        // from_sha256_bytes must produce the same CID as from_git_object_bytes
+        // when given the SHA-256 of those bytes — the two construction paths
+        // must be equivalent for self-verifying content addressing to hold.
+        let data = b"blob 5\0hello";
+        let cid_from_object = Cid::from_git_object_bytes(data);
+        let hash = sha256_bytes(data);
+        let cid_from_hash = Cid::from_sha256_bytes(&hash);
+        assert_eq!(cid_from_object, cid_from_hash);
+    }
+
+    #[test]
+    fn from_str_parses_valid_cid() {
+        let data = b"tree content for test";
+        let cid = Cid::from_git_object_bytes(data);
+        let parsed = Cid::from_str(cid.as_str()).unwrap();
+        assert_eq!(cid, parsed);
+    }
+
+    #[test]
+    fn from_str_rejects_invalid_string() {
+        let result = Cid::from_str("not-a-valid-cid");
+        assert!(result.is_err());
+    }
+
+    #[test]
+    fn different_data_produces_different_cids() {
+        let c1 = Cid::from_git_object_bytes(b"blob 5\0hello");
+        let c2 = Cid::from_git_object_bytes(b"blob 5\0world");
+        assert_ne!(c1, c2);
+    }
+
+    #[test]
+    fn sha256_hex_to_bytes_rejects_non_hex() {
+        let non_hex = "zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz";
+        assert_eq!(non_hex.len(), 64);
+        let result = sha256_hex_to_bytes(non_hex);
+        assert!(result.is_err());
+    }
+
+    #[test]
+    fn sha256_hex_to_bytes_rejects_wrong_length() {
+        let result = sha256_hex_to_bytes("deadbeef");
+        assert!(result.is_err());
+    }
+
+    #[test]
+    fn is_raw_cidv1_classifies_codec_from_string() {
+        // The canonical resolver key: CIDv1 + raw codec → not a repair candidate.
+        let raw = Cid::from_git_object_bytes(b"blob 5\0hello");
+        assert!(
+            is_raw_cidv1(raw.as_str()),
+            "from_git_object_bytes output is CIDv1/raw"
+        );
+
+        // A CIDv0 (Pinata dag-pb legacy shape) → repair candidate.
+        assert!(
+            !is_raw_cidv1("QmYwAPJzv5CZsnA625s3Xf2nemtYgPpHdWEz79ojWnPbdG"),
+            "a CIDv0 dag-pb value is a legacy-repair candidate"
+        );
+
+        // A CIDv1 with the dag-pb codec (the Kubo above-block-size root) over the
+        // same multihash → still a repair candidate (codec, not just version).
+        let parsed = raw.as_str().parse::<CidGeneric<64>>().unwrap();
+        const DAG_PB: u64 = 0x70;
+        let dagpb = CidGeneric::<64>::new_v1(DAG_PB, *parsed.hash()).to_string();
+        assert!(
+            !is_raw_cidv1(&dagpb),
+            "a CIDv1 dag-pb value is a legacy-repair candidate"
+        );
+
+        // Garbage is non-canonical.
+        assert!(
+            !is_raw_cidv1("not-a-cid"),
+            "an unparseable string is non-canonical"
+        );
+    }
+
+    #[test]
+    fn sha256_hex_of_empty_input_is_well_known() {
+        // SHA-256("") is a fixed constant; verifies the hasher is wired correctly.
+        let h = sha256_hex(b"");
+        assert_eq!(
+            h,
+            "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"
+        );
+    }
 }

crates/gitlawb-core/src/did.rs

@@ -75,12 +75,13 @@ impl Did {
     pub fn to_verifying_key(&self) -> Result<VerifyingKey> {
         if !self.is_did_key() {
             return Err(Error::InvalidDid(format!(
-                "expected did:key, got did:{}", self.method()
+                "expected did:key, got did:{}",
+                self.method()
             )));
         }
 
-        let (_, bytes) = multibase::decode(self.method_id())
-            .map_err(|e| Error::InvalidDid(e.to_string()))?;
+        let (_, bytes) =
+            multibase::decode(self.method_id()).map_err(|e| Error::InvalidDid(e.to_string()))?;
 
         if !bytes.starts_with(ED25519_MULTICODEC) {
             return Err(Error::InvalidDid(
@@ -92,8 +93,7 @@ impl Did {
             .try_into()
             .map_err(|_| Error::InvalidDid("ed25519 key must be 32 bytes".to_string()))?;
 
-        VerifyingKey::from_bytes(&key_bytes)
-            .map_err(|e| Error::InvalidDid(e.to_string()))
+        VerifyingKey::from_bytes(&key_bytes).map_err(|e| Error::InvalidDid(e.to_string()))
     }
 
     /// Return the full DID string as a `&str`.
@@ -105,7 +105,9 @@ impl Did {
     pub fn validate(&self) -> Result<()> {
         match self.method() {
             "key" | "web" | "gitlawb" => Ok(()),
-            other => Err(Error::InvalidDid(format!("unsupported DID method: {other}"))),
+            other => Err(Error::InvalidDid(format!(
+                "unsupported DID method: {other}"
+            ))),
         }
     }
 }
@@ -121,7 +123,9 @@ impl FromStr for Did {
 
     fn from_str(s: &str) -> Result<Self> {
         if !s.starts_with("did:") {
-            return Err(Error::InvalidDid(format!("'{s}' does not start with 'did:'")));
+            return Err(Error::InvalidDid(format!(
+                "'{s}' does not start with 'did:'"
+            )));
         }
         let did = Self(s.to_string());
         did.validate()?;
@@ -248,4 +252,60 @@ mod tests {
         let json = serde_json::to_string_pretty(&doc).unwrap();
         assert!(json.contains("Ed25519VerificationKey2020"));
     }
+
+    #[test]
+    fn to_verifying_key_fails_for_did_web() {
+        let web = Did::web("example.com");
+        let result = web.to_verifying_key();
+        assert!(
+            result.is_err(),
+            "did:web cannot resolve to a verifying key locally"
+        );
+    }
+
+    #[test]
+    fn to_verifying_key_fails_for_did_gitlawb() {
+        let gl = Did::gitlawb("z6MkSomeKey");
+        let result = gl.to_verifying_key();
+        assert!(
+            result.is_err(),
+            "did:gitlawb cannot resolve to a verifying key locally"
+        );
+    }
+
+    #[test]
+    fn from_str_rejects_missing_did_prefix() {
+        let result = "key:z6MkABCD".parse::<Did>();
+        assert!(result.is_err());
+    }
+
+    #[test]
+    fn from_str_rejects_unsupported_method() {
+        let result = "did:ethr:0x1234abcd".parse::<Did>();
+        assert!(result.is_err());
+    }
+
+    #[test]
+    fn validate_accepts_all_supported_methods() {
+        Did::web("example.com").validate().unwrap();
+        Did::gitlawb("z6MkSomeKey").validate().unwrap();
+        Keypair::generate().did().validate().unwrap();
+    }
+
+    #[test]
+    fn is_did_key_and_is_did_gitlawb_predicates() {
+        let key_did = Keypair::generate().did();
+        assert!(key_did.is_did_key());
+        assert!(!key_did.is_did_gitlawb());
+
+        let gl = Did::gitlawb("z6MkSomeKey");
+        assert!(!gl.is_did_key());
+        assert!(gl.is_did_gitlawb());
+    }
+
+    #[test]
+    fn method_id_extraction() {
+        assert_eq!(Did::web("example.com").method_id(), "example.com");
+        assert_eq!(Did::gitlawb("z6MkSomeKey").method_id(), "z6MkSomeKey");
+    }
 }

crates/gitlawb-core/src/encrypt.rs

@@ -0,0 +1,296 @@
+//! Envelope encryption for withheld blobs (Option B). A random content key
+//! encrypts the blob (XChaCha20-Poly1305); the content key is wrapped to each
+//! recipient via an X25519 box keyed from their Ed25519 `did:key`. The node
+//! seals with public keys only; readers open with their own private key.
+
+use crate::identity::Keypair;
+use anyhow::{Context, Result};
+use ed25519_dalek::VerifyingKey;
+use zeroize::Zeroizing;
+
+/// X25519 public key (Montgomery u) for an Ed25519 verifying key.
+fn x25519_public(vk: &VerifyingKey) -> Result<[u8; 32]> {
+    use curve25519_dalek::edwards::CompressedEdwardsY;
+    let edwards = CompressedEdwardsY::from_slice(vk.as_bytes())
+        .ok()
+        .and_then(|c| c.decompress())
+        .context("verifying key is not a valid edwards point")?;
+    Ok(edwards.to_montgomery().to_bytes())
+}
+
+/// X25519 secret scalar for an Ed25519 seed (SHA-512 of seed, lower 32, clamped).
+/// Returns the scalar wrapped in `Zeroizing`, and scrubs the intermediate
+/// SHA-512 digest, so no copy of this secret material lingers in freed memory.
+fn x25519_secret_from_seed(seed: &[u8; 32]) -> Zeroizing<[u8; 32]> {
+    use sha2::{Digest, Sha512};
+    use zeroize::Zeroize;
+    let mut h = Sha512::digest(seed);
+    let mut s = Zeroizing::new([0u8; 32]);
+    s.copy_from_slice(&h[..32]);
+    s[0] &= 248;
+    s[31] &= 127;
+    s[31] |= 64;
+    h.as_mut_slice().zeroize();
+    s
+}
+
+use base64::{engine::general_purpose::STANDARD as B64, Engine};
+use chacha20poly1305::{
+    aead::{Aead, KeyInit},
+    XChaCha20Poly1305, XNonce,
+};
+use crypto_box::{
+    aead::{AeadCore, OsRng},
+    ChaChaBox, PublicKey as XPublic, SecretKey as XSecret,
+};
+use rand::RngCore;
+use serde::{Deserialize, Serialize};
+
+const MAGIC: &[u8] = b"GLENC";
+const VERSION: u8 = 2;
+
+#[derive(Serialize, Deserialize)]
+struct Recipient {
+    eph: String,   // base64 ephemeral x25519 pubkey (32B)
+    nonce: String, // base64 box nonce (24B)
+    wrap: String,  // base64 wrapped content key
+}
+
+#[derive(Serialize, Deserialize)]
+struct Header {
+    alg: String,
+    nonce: String, // base64 body nonce (24B)
+    recipients: Vec<Recipient>,
+}
+
+/// Encrypt `plaintext` so any of `recipients` (Ed25519 keys) can decrypt.
+pub fn seal_blob(plaintext: &[u8], recipients: &[VerifyingKey]) -> Result<Vec<u8>> {
+    if recipients.is_empty() {
+        return Err(anyhow::anyhow!("seal_blob: no recipients"));
+    }
+    let mut content_key = [0u8; 32];
+    OsRng.fill_bytes(&mut content_key);
+    let body_cipher = XChaCha20Poly1305::new_from_slice(&content_key)
+        .map_err(|e| anyhow::anyhow!("content key: {e}"))?;
+    let mut body_nonce = [0u8; 24];
+    OsRng.fill_bytes(&mut body_nonce);
+    let body = body_cipher
+        .encrypt(XNonce::from_slice(&body_nonce), plaintext)
+        .map_err(|e| anyhow::anyhow!("body encrypt: {e}"))?;
+
+    let mut wrapped = Vec::with_capacity(recipients.len());
+    for vk in recipients {
+        let recip_x = XPublic::from(x25519_public(vk)?);
+        let eph = XSecret::generate(&mut OsRng);
+        let abox = ChaChaBox::new(&recip_x, &eph);
+        let nonce = ChaChaBox::generate_nonce(&mut OsRng);
+        let ct = abox
+            .encrypt(&nonce, &content_key[..])
+            .map_err(|e| anyhow::anyhow!("wrap: {e}"))?;
+        wrapped.push(Recipient {
+            eph: B64.encode(eph.public_key().as_bytes()),
+            nonce: B64.encode(nonce),
+            wrap: B64.encode(ct),
+        });
+    }
+
+    let header = Header {
+        alg: "xchacha20poly1305".into(),
+        nonce: B64.encode(body_nonce),
+        recipients: wrapped,
+    };
+    let header_json = serde_json::to_vec(&header).context("encode header")?;
+
+    let mut out = Vec::new();
+    out.extend_from_slice(MAGIC);
+    out.push(VERSION);
+    out.extend_from_slice(&(header_json.len() as u32).to_le_bytes());
+    out.extend_from_slice(&header_json);
+    out.extend_from_slice(&body);
+    Ok(out)
+}
+
+/// Decrypt an envelope with `keypair`. Errors if not a recipient or on auth fail.
+pub fn open_blob(envelope: &[u8], keypair: &Keypair) -> Result<Vec<u8>> {
+    let mut p = 0;
+    if envelope.len() < MAGIC.len() + 1 + 4 || &envelope[..MAGIC.len()] != MAGIC {
+        return Err(anyhow::anyhow!("bad envelope magic"));
+    }
+    p += MAGIC.len();
+    if envelope[p] != VERSION {
+        return Err(anyhow::anyhow!("unsupported envelope version"));
+    }
+    p += 1;
+    let hlen = u32::from_le_bytes(envelope[p..p + 4].try_into().unwrap()) as usize;
+    p += 4;
+    let header: Header =
+        serde_json::from_slice(envelope.get(p..p + hlen).context("truncated header")?)
+            .context("decode header")?;
+    let body = &envelope[p + hlen..];
+
+    let my_x = XSecret::from(*x25519_secret_from_seed(&keypair.to_seed()));
+
+    // Identities are blinded: no entry says which recipient it belongs to, so
+    // try each one. The ChaChaBox AEAD tag authenticates, so exactly the
+    // reader's own entry unwraps; every other entry fails cleanly.
+    let mut content_key: Option<Vec<u8>> = None;
+    for entry in &header.recipients {
+        let eph = match B64
+            .decode(&entry.eph)
+            .ok()
+            .and_then(|b| <[u8; 32]>::try_from(b.as_slice()).ok())
+        {
+            Some(b) => XPublic::from(b),
+            None => continue,
+        };
+        // from_slice panics on a wrong length, and the envelope is attacker
+        // controlled, so validate the 24-byte box nonce before using it.
+        let nonce = match B64
+            .decode(&entry.nonce)
+            .ok()
+            .and_then(|n| <[u8; 24]>::try_from(n.as_slice()).ok())
+        {
+            Some(n) => n,
+            None => continue,
+        };
+        let wrap = match B64.decode(&entry.wrap) {
+            Ok(w) => w,
+            Err(_) => continue,
+        };
+        let abox = ChaChaBox::new(&eph, &my_x);
+        if let Ok(ck) = abox.decrypt(
+            crypto_box::aead::generic_array::GenericArray::from_slice(&nonce),
+            wrap.as_slice(),
+        ) {
+            content_key = Some(ck);
+            break;
+        }
+    }
+    let content_key = content_key.context("not a recipient of this envelope")?;
+
+    let body_cipher = XChaCha20Poly1305::new_from_slice(&content_key)
+        .map_err(|e| anyhow::anyhow!("content key: {e}"))?;
+    let body_nonce = B64
+        .decode(&header.nonce)
+        .ok()
+        .and_then(|n| <[u8; 24]>::try_from(n.as_slice()).ok())
+        .context("invalid body nonce")?;
+    body_cipher
+        .decrypt(XNonce::from_slice(&body_nonce), body)
+        .map_err(|_| anyhow::anyhow!("body decrypt failed"))
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::identity::Keypair;
+
+    #[test]
+    fn ed25519_to_x25519_keypair_agrees() {
+        // The X25519 public derived from the Ed25519 public must equal the
+        // X25519 public of the X25519 secret derived from the same seed.
+        let kp = Keypair::generate();
+        let seed = kp.to_seed();
+        let xpub_from_public = x25519_public(&kp.verifying_key()).unwrap();
+        let xsec = x25519_secret_from_seed(&seed);
+        let xpub_from_secret = crypto_box::SecretKey::from(*xsec).public_key().to_bytes();
+        assert_eq!(xpub_from_public, xpub_from_secret);
+    }
+
+    #[test]
+    fn seal_open_round_trip_for_recipients() {
+        let owner = Keypair::generate();
+        let reader_a = Keypair::generate();
+        let reader_b = Keypair::generate();
+        let msg = b"private blob contents";
+
+        let env = seal_blob(msg, &[owner.verifying_key(), reader_a.verifying_key()]).unwrap();
+
+        assert_eq!(open_blob(&env, &owner).unwrap(), msg);
+        assert_eq!(open_blob(&env, &reader_a).unwrap(), msg);
+        assert!(
+            open_blob(&env, &reader_b).is_err(),
+            "non-recipient must fail"
+        );
+    }
+
+    #[test]
+    fn tampered_envelope_fails() {
+        let owner = Keypair::generate();
+        let mut env = seal_blob(b"hi", &[owner.verifying_key()]).unwrap();
+        let last = env.len() - 1;
+        env[last] ^= 0x01;
+        assert!(open_blob(&env, &owner).is_err());
+    }
+
+    #[test]
+    fn v2_header_contains_no_recipient_pubkey() {
+        // The blinded envelope header must not carry any recipient's public key.
+        let reader = Keypair::generate();
+        let env = seal_blob(b"private blob contents", &[reader.verifying_key()]).unwrap();
+
+        // Slice out the header bytes using the envelope framing:
+        // MAGIC | version(1B) | header_len(4B LE) | header_json | body
+        let mut p = MAGIC.len() + 1; // skip MAGIC + version byte
+        let hlen = u32::from_le_bytes(env[p..p + 4].try_into().unwrap()) as usize;
+        p += 4;
+        let header = &env[p..p + hlen];
+        let header_str = String::from_utf8_lossy(header);
+
+        let pubkey_b64 = B64.encode(reader.verifying_key().as_bytes());
+        assert!(
+            !header_str.contains(&pubkey_b64),
+            "recipient public key must not appear in the blinded header"
+        );
+    }
+
+    #[test]
+    fn v1_envelope_is_rejected() {
+        let reader = Keypair::generate();
+        let mut env = seal_blob(b"hi", &[reader.verifying_key()]).unwrap();
+        // Flip the version byte (immediately after MAGIC) from 2 to 1.
+        env[MAGIC.len()] = 1;
+        let err = open_blob(&env, &reader).unwrap_err();
+        assert!(
+            err.to_string().contains("unsupported envelope version"),
+            "expected version-rejection error, got: {err}"
+        );
+    }
+
+    #[test]
+    fn malformed_nonce_returns_err_not_panic() {
+        // from_slice panics on wrong-length input; a crafted envelope on the
+        // public recovery path must surface an error, never panic.
+        let reader = Keypair::generate();
+        let env = seal_blob(b"private blob contents", &[reader.verifying_key()]).unwrap();
+
+        // Split the envelope framing into header JSON and body.
+        let mut p = MAGIC.len() + 1;
+        let hlen = u32::from_le_bytes(env[p..p + 4].try_into().unwrap()) as usize;
+        p += 4;
+        let header_bytes = &env[p..p + hlen];
+        let body = &env[p + hlen..];
+
+        let reframe = |header: &serde_json::Value| -> Vec<u8> {
+            let hj = serde_json::to_vec(header).unwrap();
+            let mut out = Vec::new();
+            out.extend_from_slice(MAGIC);
+            out.push(VERSION);
+            out.extend_from_slice(&(hj.len() as u32).to_le_bytes());
+            out.extend_from_slice(&hj);
+            out.extend_from_slice(body);
+            out
+        };
+        let bad_nonce = serde_json::Value::String(B64.encode([0u8; 12]));
+
+        // Corrupted per-recipient nonce: entry is skipped, no match.
+        let mut header: serde_json::Value = serde_json::from_slice(header_bytes).unwrap();
+        header["recipients"][0]["nonce"] = bad_nonce.clone();
+        assert!(open_blob(&reframe(&header), &reader).is_err());
+
+        // Corrupted body nonce: unwrap succeeds, body nonce is rejected.
+        let mut header: serde_json::Value = serde_json::from_slice(header_bytes).unwrap();
+        header["nonce"] = bad_nonce;
+        assert!(open_blob(&reframe(&header), &reader).is_err());
+    }
+}

crates/gitlawb-core/src/http_sig.rs

@@ -11,14 +11,14 @@
 //!   Signature-Input:  sig1=("@method" "@path" "content-digest");keyid="did:key:z6Mk...";alg="ed25519";created=<unix>
 //!   Signature:        sig1=:base64signature:
 
-use base64::{Engine, engine::general_purpose::STANDARD};
+use base64::{engine::general_purpose::STANDARD, Engine};
 use chrono::Utc;
-use sha2::{Sha256, Digest};
+use sha2::{Digest, Sha256};
 use std::collections::HashMap;
 
-use crate::{Error, Result};
 use crate::did::Did;
 use crate::identity::Keypair;
+use crate::{Error, Result};
 
 /// The component identifiers covered by every gitlawb signature.
 pub const COVERED_COMPONENTS: &[&str] = &["@method", "@path", "content-digest"];
@@ -53,16 +53,16 @@ impl HttpSignature {
         let sig_input = sig_input.trim();
 
         // Expect: sig1=("@method" "@path" "content-digest");keyid="...";alg="...";created=...
-        let rest = sig_input
-            .strip_prefix("sig1=")
-            .ok_or_else(|| Error::HttpSignature("Signature-Input must start with 'sig1='".into()))?;
+        let rest = sig_input.strip_prefix("sig1=").ok_or_else(|| {
+            Error::HttpSignature("Signature-Input must start with 'sig1='".into())
+        })?;
 
-        let open = rest.find('(').ok_or_else(|| {
-            Error::HttpSignature("missing '(' in Signature-Input".into())
-        })?;
-        let close = rest.find(')').ok_or_else(|| {
-            Error::HttpSignature("missing ')' in Signature-Input".into())
-        })?;
+        let open = rest
+            .find('(')
+            .ok_or_else(|| Error::HttpSignature("missing '(' in Signature-Input".into()))?;
+        let close = rest
+            .find(')')
+            .ok_or_else(|| Error::HttpSignature("missing ')' in Signature-Input".into()))?;
 
         let components_str = &rest[open + 1..close];
         let params_str = &rest[close + 1..]; // starts with ';'
@@ -98,15 +98,19 @@ impl HttpSignature {
             .trim()
             .strip_prefix("sig1=:")
             .and_then(|s| s.strip_suffix(':'))
-            .ok_or_else(|| {
-                Error::HttpSignature("Signature must be 'sig1=:base64:'".into())
-            })?;
+            .ok_or_else(|| Error::HttpSignature("Signature must be 'sig1=:base64:'".into()))?;
 
         let signature_bytes = STANDARD
             .decode(sig_b64)
             .map_err(|e| Error::HttpSignature(format!("invalid base64 in Signature: {e}")))?;
 
-        Ok(Self { key_id, alg, created, components, signature_bytes })
+        Ok(Self {
+            key_id,
+            alg,
+            created,
+            components,
+            signature_bytes,
+        })
     }
 
     /// Reject if the `created` timestamp is more than 5 minutes from now.
@@ -125,7 +129,7 @@ impl HttpSignature {
     pub fn missing_components(&self) -> Vec<&str> {
         COVERED_COMPONENTS
             .iter()
-            .filter(|c| !self.components.contains(&c.to_string()))
+            .filter(|c| !self.components.iter().any(|s| s.as_str() == **c))
             .copied()
             .collect()
     }
@@ -178,12 +182,9 @@ pub fn sign_request(
     request_values.insert("@path".to_string(), path_and_query.to_string());
     request_values.insert("content-digest".to_string(), content_digest.clone());
 
-    let signing_string = build_signing_string(
-        COVERED_COMPONENTS,
-        sig_params_value,
-        &request_values,
-    )
-    .expect("required components always present when building");
+    let signing_string =
+        build_signing_string(COVERED_COMPONENTS, sig_params_value, &request_values)
+            .expect("required components always present when building");
 
     let sig_bytes = keypair.sign(signing_string.as_bytes());
     let sig_b64 = STANDARD.encode(sig_bytes.to_bytes());
@@ -290,10 +291,16 @@ mod tests {
         request_values.insert("content-digest".to_string(), headers.content_digest.clone());
 
         let components_ref: Vec<&str> = sig.components.iter().map(String::as_str).collect();
-        let signing_string = build_signing_string(&components_ref, sig_params_value, &request_values).unwrap();
+        let signing_string =
+            build_signing_string(&components_ref, sig_params_value, &request_values).unwrap();
 
         let vk = sig.key_id.to_verifying_key().unwrap();
-        let sig_b64 = headers.signature.strip_prefix("sig1=:").unwrap().strip_suffix(':').unwrap();
+        let sig_b64 = headers
+            .signature
+            .strip_prefix("sig1=:")
+            .unwrap()
+            .strip_suffix(':')
+            .unwrap();
         let sig_bytes: [u8; 64] = STANDARD.decode(sig_b64).unwrap().try_into().unwrap();
 
         assert!(verify(&vk, signing_string.as_bytes(), &sig_bytes).is_ok());
@@ -321,7 +328,9 @@ mod tests {
         let kp = Keypair::generate();
         let did = kp.did();
         // created=1 is way in the past — should fail clock skew check
-        let sig_input = format!(r#"sig1=("@method" "@path" "content-digest");keyid="{did}";alg="ed25519";created=1"#);
+        let sig_input = format!(
+            r#"sig1=("@method" "@path" "content-digest");keyid="{did}";alg="ed25519";created=1"#
+        );
         let sig = HttpSignature::parse(&sig_input, "sig1=:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA:").unwrap();
         assert!(sig.check_created().is_err());
     }

crates/gitlawb-core/src/identity.rs

@@ -3,13 +3,13 @@
 //! A gitlawb identity is an Ed25519 keypair. The public key encodes into a
 //! `did:key` DID. The private key is stored as PKCS#8 PEM on disk.
 
-use ed25519_dalek::{SigningKey, VerifyingKey, Signer, Signature};
+use ed25519_dalek::{Signature, Signer, SigningKey, VerifyingKey};
 use rand::rngs::OsRng;
 use serde::{Deserialize, Serialize};
 use zeroize::Zeroizing;
 
-use crate::{Error, Result};
 use crate::did::Did;
+use crate::{Error, Result};
 
 /// An Ed25519 keypair that is the root identity for a gitlawb actor.
 #[derive(Clone)]
@@ -47,12 +47,14 @@ impl Keypair {
 
     /// Sign and return base64url-encoded signature string.
     pub fn sign_b64(&self, msg: &[u8]) -> String {
-        use base64::{Engine, engine::general_purpose::URL_SAFE_NO_PAD};
+        use base64::{engine::general_purpose::URL_SAFE_NO_PAD, Engine};
         let sig = self.sign(msg);
         URL_SAFE_NO_PAD.encode(sig.to_bytes())
     }
 
-    /// Export the signing key as raw 32-byte seed (wrapped in Zeroizing).
+    /// The raw 32-byte Ed25519 seed, wrapped in `Zeroizing` so the copy is
+    /// scrubbed on drop. This is the only seed accessor; it is used to derive
+    /// the X25519 secret for envelope decryption (see `crate::encrypt`).
     pub fn to_seed(&self) -> Zeroizing<[u8; 32]> {
         Zeroizing::new(self.signing_key.to_bytes())
     }
@@ -69,18 +71,13 @@ impl Keypair {
     /// Load from PEM-encoded PKCS#8 private key string.
     pub fn from_pem(pem: &str) -> Result<Self> {
         use pkcs8::DecodePrivateKey;
-        let signing_key = SigningKey::from_pkcs8_pem(pem)
-            .map_err(|e| Error::Key(e.to_string()))?;
+        let signing_key = SigningKey::from_pkcs8_pem(pem).map_err(|e| Error::Key(e.to_string()))?;
         Ok(Self { signing_key })
     }
 }
 
 /// Verify an Ed25519 signature.
-pub fn verify(
-    verifying_key: &VerifyingKey,
-    msg: &[u8],
-    sig_bytes: &[u8; 64],
-) -> Result<()> {
+pub fn verify(verifying_key: &VerifyingKey, msg: &[u8], sig_bytes: &[u8; 64]) -> Result<()> {
     use ed25519_dalek::Verifier;
     let sig = Signature::from_bytes(sig_bytes);
     verifying_key
@@ -117,8 +114,8 @@ impl<T: Serialize> Signed<T> {
 }
 
 mod sig_b64 {
-    use base64::{Engine, engine::general_purpose::URL_SAFE_NO_PAD};
-    use serde::{Deserializer, Serializer, Deserialize};
+    use base64::{engine::general_purpose::URL_SAFE_NO_PAD, Engine};
+    use serde::{Deserialize, Deserializer, Serializer};
 
     pub fn serialize<S: Serializer>(bytes: &[u8; 64], s: S) -> Result<S::Ok, S::Error> {
         s.serialize_str(&URL_SAFE_NO_PAD.encode(bytes))
@@ -126,8 +123,12 @@ mod sig_b64 {
 
     pub fn deserialize<'de, D: Deserializer<'de>>(d: D) -> Result<[u8; 64], D::Error> {
         let s = String::deserialize(d)?;
-        let bytes = URL_SAFE_NO_PAD.decode(&s).map_err(serde::de::Error::custom)?;
-        bytes.try_into().map_err(|_| serde::de::Error::custom("expected 64 bytes"))
+        let bytes = URL_SAFE_NO_PAD
+            .decode(&s)
+            .map_err(serde::de::Error::custom)?;
+        bytes
+            .try_into()
+            .map_err(|_| serde::de::Error::custom("expected 64 bytes"))
     }
 }
 
@@ -158,4 +159,80 @@ mod tests {
         let did = kp.did();
         assert!(did.to_string().starts_with("did:key:z6Mk"));
     }
+
+    #[test]
+    fn from_seed_round_trip() {
+        let kp = Keypair::generate();
+        let seed = kp.to_seed();
+        let kp2 = Keypair::from_seed(&seed).unwrap();
+        assert_eq!(kp.verifying_key(), kp2.verifying_key());
+    }
+
+    // `to_seed()` is the only seed accessor on `Keypair` (the raw, unzeroized
+    // `seed_bytes()` was removed in #41). Pin its return type so a bare-array
+    // accessor can't slip back in, and confirm it is deterministic. The
+    // from_seed -> verifying_key round-trip is already covered by
+    // `from_seed_round_trip`.
+    #[test]
+    fn to_seed_returns_zeroizing_and_is_deterministic() {
+        let kp = Keypair::generate();
+        // The type annotation is the regression guard: the seed must be handed
+        // out wrapped in `Zeroizing`, never as a bare `[u8; 32]`.
+        let seed: Zeroizing<[u8; 32]> = kp.to_seed();
+        assert_eq!(*kp.to_seed(), *seed); // stable across calls
+    }
+
+    #[test]
+    fn sign_b64_decodes_to_valid_signature() {
+        use base64::{engine::general_purpose::URL_SAFE_NO_PAD, Engine};
+        let kp = Keypair::generate();
+        let msg = b"test payload for b64 signing";
+        let b64 = kp.sign_b64(msg);
+        let sig_bytes: [u8; 64] = URL_SAFE_NO_PAD
+            .decode(&b64)
+            .expect("sign_b64 must produce valid base64url")
+            .try_into()
+            .expect("Ed25519 signature must be 64 bytes");
+        verify(&kp.verifying_key(), msg, &sig_bytes).unwrap();
+    }
+
+    #[test]
+    fn verify_rejects_wrong_key() {
+        let kp1 = Keypair::generate();
+        let kp2 = Keypair::generate();
+        let msg = b"some message";
+        let sig = kp1.sign(msg);
+        let result = verify(&kp2.verifying_key(), msg, &sig.to_bytes());
+        assert!(
+            result.is_err(),
+            "signature from kp1 must not verify under kp2"
+        );
+    }
+
+    #[test]
+    fn signed_payload_round_trip() {
+        let kp = Keypair::generate();
+        let payload = serde_json::json!({"action": "push", "repo": "my-repo"});
+        let signed = Signed::new(payload, &kp).unwrap();
+        signed.verify(&kp.verifying_key()).unwrap();
+    }
+
+    #[test]
+    fn signed_payload_wrong_key_fails() {
+        let kp1 = Keypair::generate();
+        let kp2 = Keypair::generate();
+        let payload = serde_json::json!({"action": "push"});
+        let signed = Signed::new(payload, &kp1).unwrap();
+        let result = signed.verify(&kp2.verifying_key());
+        assert!(
+            result.is_err(),
+            "Signed payload must not verify under a different key"
+        );
+    }
+
+    #[test]
+    fn from_pem_invalid_input_fails() {
+        let result = Keypair::from_pem("this is not valid PEM at all");
+        assert!(result.is_err());
+    }
 }

crates/gitlawb-core/src/lib.rs

@@ -1,10 +1,11 @@
-pub mod did;
-pub mod cid;
-pub mod identity;
-pub mod http_sig;
-pub mod ucan;
 pub mod cert;
+pub mod cid;
+pub mod did;
+pub mod encrypt;
 pub mod error;
+pub mod http_sig;
+pub mod identity;
+pub mod ucan;
 
 pub use error::Error;
 pub type Result<T> = std::result::Result<T, Error>;

crates/gitlawb-core/src/ucan.rs

@@ -12,9 +12,9 @@
 use chrono::{DateTime, Utc};
 use serde::{Deserialize, Serialize};
 
-use crate::{Error, Result};
 use crate::did::Did;
 use crate::identity::Keypair;
+use crate::{Error, Result};
 
 /// A UCAN capability: what resource the token grants access to.
 #[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
@@ -30,13 +30,31 @@ pub struct Capability {
 
 impl Capability {
     pub fn new(with: impl Into<String>, can: impl Into<String>) -> Self {
-        Self { with: with.into(), can: can.into(), constraints: None }
+        Self {
+            with: with.into(),
+            can: can.into(),
+            constraints: None,
+        }
     }
 
     pub fn with_constraints(mut self, constraints: serde_json::Value) -> Self {
         self.constraints = Some(constraints);
         self
     }
+
+    /// Returns `true` if `self` is a valid attenuation of `parent`.
+    ///
+    /// A delegated capability is only valid if it is at most as permissive as
+    /// the parent capability backing it. `"*"` on the **parent**'s resource or
+    /// action field and `repo/admin` in the parent's action position act as
+    /// wildcards that cover any delegated value; wildcards on `self` carry no
+    /// special meaning.
+    pub fn is_attenuated_by(&self, parent: &Capability) -> bool {
+        let resource_ok = parent.with == self.with || parent.with == "*";
+        let action_ok =
+            parent.can == self.can || parent.can == "*" || parent.can == caps::REPO_ADMIN;
+        resource_ok && action_ok
+    }
 }
 
 /// Well-known gitlawb capability strings.
@@ -128,18 +146,40 @@ impl Ucan {
         }
     }
 
+    /// Check if this UCAN's not-before time is in the future (token not yet valid).
+    pub fn is_before_valid(&self) -> bool {
+        if let Some(nbf) = self.payload.nbf {
+            Utc::now().timestamp() < nbf
+        } else {
+            false
+        }
+    }
+
+    /// Verify this UCAN's audience matches `expected`.
+    pub fn verify_audience(&self, expected: &Did) -> Result<()> {
+        if &self.payload.aud != expected {
+            return Err(Error::Ucan(format!(
+                "audience mismatch: expected {expected}, got {}",
+                self.payload.aud
+            )));
+        }
+        Ok(())
+    }
+
     /// Verify the signature on this UCAN.
     pub fn verify_signature(&self) -> Result<()> {
-        use base64::{Engine, engine::general_purpose::URL_SAFE_NO_PAD};
         use crate::identity::verify;
+        use base64::{engine::general_purpose::URL_SAFE_NO_PAD, Engine};
 
         let vk = self.payload.iss.to_verifying_key()?;
         let signing_bytes = serde_json::to_vec(&self.payload)?;
 
-        let sig_bytes_vec = URL_SAFE_NO_PAD.decode(&self.s)
+        let sig_bytes_vec = URL_SAFE_NO_PAD
+            .decode(&self.s)
             .map_err(|e| Error::Ucan(format!("invalid base64 signature: {e}")))?;
 
-        let sig_bytes: [u8; 64] = sig_bytes_vec.try_into()
+        let sig_bytes: [u8; 64] = sig_bytes_vec
+            .try_into()
             .map_err(|_| Error::Ucan("signature must be 64 bytes".to_string()))?;
 
         verify(&vk, &signing_bytes, &sig_bytes)
@@ -148,9 +188,10 @@ impl Ucan {
 
     /// Check if this UCAN grants a specific capability on a resource.
     pub fn can(&self, resource: &str, action: &str) -> bool {
-        self.payload.att.iter().any(|cap| {
-            cap.with == resource && cap.can == action
-        })
+        self.payload
+            .att
+            .iter()
+            .any(|cap| cap.with == resource && cap.can == action)
     }
 
     /// Encode to a compact JSON string (the wire format).
@@ -210,6 +251,10 @@ impl Ucan {
             return Err(Error::Ucan("token is expired".to_string()));
         }
 
+        if self.is_before_valid() {
+            return Err(Error::Ucan("token is not yet valid".to_string()));
+        }
+
         for proof_token in &self.payload.prf {
             let proof = Self::decode(proof_token)
                 .map_err(|e| Error::Ucan(format!("failed to decode proof: {e}")))?;
@@ -222,6 +267,17 @@ impl Ucan {
                 )));
             }
 
+            // Every delegated capability must be covered by the proof (attenuation).
+            for cap in &self.payload.att {
+                let covered = proof.payload.att.iter().any(|p| cap.is_attenuated_by(p));
+                if !covered {
+                    return Err(Error::Ucan(format!(
+                        "capability attenuation violated: '{}' on '{}' not covered by proof",
+                        cap.can, cap.with
+                    )));
+                }
+            }
+
             // Verify the proof's signature and chain recursively
             proof.verify_chain()?;
         }
@@ -245,7 +301,8 @@ mod tests {
             audience.clone(),
             vec![Capability::new("gitlawb://repos/test/repo", caps::GIT_PUSH)],
             None,
-        ).unwrap();
+        )
+        .unwrap();
 
         ucan.verify_signature().unwrap();
         assert!(!ucan.is_expired());
@@ -291,10 +348,12 @@ mod tests {
         let issuer = Keypair::generate();
         let audience = Keypair::generate().did();
         let ucan = Ucan::issue(
-            &issuer, audience,
+            &issuer,
+            audience,
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
-        ).unwrap();
+        )
+        .unwrap();
         // Root UCAN (no proofs) should verify fine
         ucan.verify_chain().unwrap();
     }
@@ -307,18 +366,22 @@ mod tests {
 
         // Alice grants Bob push access
         let root = Ucan::issue(
-            &alice, bob.did(),
+            &alice,
+            bob.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
-        ).unwrap();
+        )
+        .unwrap();
 
         // Bob delegates to Charlie (with proof from Alice)
         let delegated = Ucan::delegate(
-            &bob, charlie.did(),
+            &bob,
+            charlie.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
             &root,
-        ).unwrap();
+        )
+        .unwrap();
 
         // Chain should verify: Charlie's token → Bob's proof → Alice signed it
         delegated.verify_chain().unwrap();
@@ -334,18 +397,22 @@ mod tests {
 
         // Alice grants Bob access
         let root = Ucan::issue(
-            &alice, bob.did(),
+            &alice,
+            bob.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
-        ).unwrap();
+        )
+        .unwrap();
 
         // Eve (NOT Bob) tries to delegate using Alice's proof
         let bad = Ucan::delegate(
-            &eve, charlie.did(),
+            &eve,
+            charlie.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
             &root,
-        ).unwrap();
+        )
+        .unwrap();
 
         // Should fail: proof audience (Bob) != UCAN issuer (Eve)
         let err = bad.verify_chain().unwrap_err();
@@ -361,20 +428,177 @@ mod tests {
         // Alice grants Bob access with expiry in the past
         let exp = chrono::Utc::now() - chrono::Duration::hours(1);
         let root = Ucan::issue(
-            &alice, bob.did(),
+            &alice,
+            bob.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             Some(exp),
-        ).unwrap();
+        )
+        .unwrap();
 
         let delegated = Ucan::delegate(
-            &bob, charlie.did(),
+            &bob,
+            charlie.did(),
             vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
             None,
             &root,
-        ).unwrap();
+        )
+        .unwrap();
 
         // Should fail: the proof is expired
         let err = delegated.verify_chain().unwrap_err();
         assert!(err.to_string().contains("expired"));
     }
+
+    #[test]
+    fn is_before_valid_future_nbf() {
+        let issuer = Keypair::generate();
+        let audience = Keypair::generate().did();
+        let nbf_future = chrono::Utc::now() + chrono::Duration::hours(1);
+
+        let payload = UcanPayload {
+            ucan: "1.0.0".to_string(),
+            iss: issuer.did(),
+            aud: audience,
+            att: vec![],
+            exp: None,
+            nbf: Some(nbf_future.timestamp()),
+            prf: vec![],
+        };
+        let signing_bytes = serde_json::to_vec(&payload).unwrap();
+        let sig = issuer.sign_b64(&signing_bytes);
+        let ucan = Ucan { payload, s: sig };
+
+        assert!(ucan.is_before_valid());
+        let err = ucan.verify_chain().unwrap_err();
+        assert!(err.to_string().contains("not yet valid"));
+    }
+
+    #[test]
+    fn is_before_valid_past_nbf() {
+        let issuer = Keypair::generate();
+        let audience = Keypair::generate().did();
+        let nbf_past = chrono::Utc::now() - chrono::Duration::hours(1);
+
+        let payload = UcanPayload {
+            ucan: "1.0.0".to_string(),
+            iss: issuer.did(),
+            aud: audience,
+            att: vec![Capability::new("gitlawb://repos/test", caps::GIT_PUSH)],
+            exp: None,
+            nbf: Some(nbf_past.timestamp()),
+            prf: vec![],
+        };
+        let signing_bytes = serde_json::to_vec(&payload).unwrap();
+        let sig = issuer.sign_b64(&signing_bytes);
+        let ucan = Ucan { payload, s: sig };
+
+        assert!(!ucan.is_before_valid());
+        ucan.verify_chain().unwrap();
+    }
+
+    #[test]
+    fn verify_audience_matches() {
+        let issuer = Keypair::generate();
+        let audience = Keypair::generate().did();
+        let ucan = Ucan::issue(&issuer, audience.clone(), vec![], None).unwrap();
+        ucan.verify_audience(&audience).unwrap();
+    }
+
+    #[test]
+    fn verify_audience_mismatch() {
+        let issuer = Keypair::generate();
+        let audience = Keypair::generate().did();
+        let wrong = Keypair::generate().did();
+        let ucan = Ucan::issue(&issuer, audience, vec![], None).unwrap();
+        let err = ucan.verify_audience(&wrong).unwrap_err();
+        assert!(err.to_string().contains("audience mismatch"));
+    }
+
+    #[test]
+    fn attenuation_valid_subset() {
+        let alice = Keypair::generate();
+        let bob = Keypair::generate();
+        let charlie = Keypair::generate();
+
+        // Alice grants Bob push on a specific repo
+        let root = Ucan::issue(
+            &alice,
+            bob.did(),
+            vec![Capability::new("gitlawb://repos/org/repo", caps::GIT_PUSH)],
+            None,
+        )
+        .unwrap();
+
+        // Bob delegates the same capability (exact subset) to Charlie
+        let delegated = Ucan::delegate(
+            &bob,
+            charlie.did(),
+            vec![Capability::new("gitlawb://repos/org/repo", caps::GIT_PUSH)],
+            None,
+            &root,
+        )
+        .unwrap();
+
+        delegated.verify_chain().unwrap();
+    }
+
+    #[test]
+    fn attenuation_exceeds_parent_is_rejected() {
+        let alice = Keypair::generate();
+        let bob = Keypair::generate();
+        let charlie = Keypair::generate();
+
+        // Alice grants Bob push on one repo only
+        let root = Ucan::issue(
+            &alice,
+            bob.did(),
+            vec![Capability::new("gitlawb://repos/org/repo", caps::GIT_PUSH)],
+            None,
+        )
+        .unwrap();
+
+        // Bob tries to delegate merge (not in the original grant) to Charlie
+        let delegated = Ucan::delegate(
+            &bob,
+            charlie.did(),
+            vec![Capability::new("gitlawb://repos/org/repo", caps::PR_MERGE)],
+            None,
+            &root,
+        )
+        .unwrap();
+
+        let err = delegated.verify_chain().unwrap_err();
+        assert!(err.to_string().contains("attenuation violated"));
+    }
+
+    #[test]
+    fn attenuation_repo_admin_covers_all() {
+        let alice = Keypair::generate();
+        let bob = Keypair::generate();
+        let charlie = Keypair::generate();
+
+        // Alice grants Bob repo/admin (superpower)
+        let root = Ucan::issue(
+            &alice,
+            bob.did(),
+            vec![Capability::new(
+                "gitlawb://repos/org/repo",
+                caps::REPO_ADMIN,
+            )],
+            None,
+        )
+        .unwrap();
+
+        // Bob delegates a more specific capability — covered by repo/admin
+        let delegated = Ucan::delegate(
+            &bob,
+            charlie.did(),
+            vec![Capability::new("gitlawb://repos/org/repo", caps::GIT_PUSH)],
+            None,
+            &root,
+        )
+        .unwrap();
+
+        delegated.verify_chain().unwrap();
+    }
 }

crates/gitlawb-node/Cargo.toml

@@ -1,8 +1,9 @@
 [package]
 name = "gitlawb-node"
 description = "The gitlawb node daemon — git hosting over HTTP with DID auth"
-version.workspace = true
+version = "0.5.1" # x-release-please-version
 edition.workspace = true
+rust-version.workspace = true
 license.workspace = true
 
 [[bin]]
@@ -11,6 +12,8 @@ path = "src/main.rs"
 
 [dependencies]
 gitlawb-core = { path = "../gitlawb-core" }
+ed25519-dalek = { workspace = true }
+base64 = { workspace = true }
 tokio = { workspace = true }
 serde = { workspace = true }
 serde_json = { workspace = true }
@@ -26,9 +29,10 @@ async-graphql-axum = "7"
 tokio-stream = { version = "0.1", features = ["sync"] }
 tower = "0.5"
 tower-http = { version = "0.6", features = ["cors", "trace", "request-id", "limit"] }
-sqlx = { version = "0.8", features = ["postgres", "runtime-tokio-rustls", "chrono", "uuid"] }
+sqlx = { version = "0.8", features = ["postgres", "runtime-tokio-rustls", "chrono", "uuid", "macros", "migrate"] }
 clap = { version = "4", features = ["derive", "env"] }
 bytes = "1"
+libc = "0.2"
 cid = { workspace = true }
 hex = { workspace = true }
 sha2 = { workspace = true }
@@ -36,14 +40,28 @@ hmac = { workspace = true }
 http-body-util = "0.1"
 tokio-util = { version = "0.7", features = ["io"] }
 dirs-next = "2"
+# NFC-normalize visibility globs/paths at the matcher seam so a deny rule
+# withholds a canonically-equivalent path regardless of NFC/NFD form (#101).
+unicode-normalization = "0.1"
 reqwest = { workspace = true }
-libp2p = { version = "0.55", features = ["gossipsub", "kad", "mdns", "noise", "tcp", "tokio", "yamux", "identify", "macros"] }
+libp2p-core = "0.43"
+libp2p-gossipsub = "0.49.4"
+libp2p-identify = "0.47"
+libp2p-identity = { version = "0.2", features = ["ed25519", "peerid", "rand"] }
+libp2p-kad = "0.48"
+libp2p-quic = { version = "0.13", features = ["tokio"] }
+libp2p-swarm = { version = "0.47", features = ["macros", "tokio"] }
+multiaddr = "0.18"
 futures = "0.3"
-aws-sdk-s3 = "1"
+aws-sdk-s3 = { version = "1", default-features = false, features = ["sigv4a", "default-https-client", "rt-tokio"] }
 aws-config = { version = "1", features = ["behavior-version-latest"] }
 async-compression = { version = "0.4", features = ["tokio", "zstd"] }
 tar = "0.4"
 zstd = "0.13"
+# Prometheus metrics. Used to expose a /metrics endpoint for ops/observability
+# on the opt-in GITLAWB_METRICS_ADDR listener. The crate is also the de-facto
+# exposition format encoder in the Rust ecosystem.
+prometheus = { version = "0.13", default-features = false }
 alloy = { version = "1", default-features = false, features = [
     "contract",
     "provider-http",
@@ -54,6 +72,7 @@ alloy = { version = "1", default-features = false, features = [
     "network",
     "rpc-types-eth",
 ] }
+libp2p-dns = { version = "0.44.0", features = ["tokio"] }
 
 [dev-dependencies]
 mockito = "1"

crates/gitlawb-node/src/api/agents.rs

@@ -2,12 +2,52 @@
 
 use axum::extract::{Path, Query, State};
 use axum::http::StatusCode;
-use axum::Json;
+use axum::{Extension, Json};
 use serde::{Deserialize, Serialize};
 
+use crate::auth::AuthenticatedDid;
 use crate::error::{AppError, Result};
 use crate::state::AppState;
 
+fn normalize_agent_did(did: &str) -> String {
+    if did.starts_with("did:") {
+        did.to_string()
+    } else {
+        format!("did:key:{did}")
+    }
+}
+
+fn agent_key_segment(did: &str) -> &str {
+    did.split(':').next_back().unwrap_or(did)
+}
+
+/// Whether `caller` (the verified `AuthenticatedDid`) is the same identity as
+/// `target` (the DID being acted on), tolerant of full `did:key:...` vs short
+/// key-only forms on either side. Used to gate self-deregistration so a DID
+/// can only retire itself.
+fn caller_matches_did(caller: &str, target: &str) -> bool {
+    agent_key_segment(caller) == agent_key_segment(target)
+}
+
+async fn resolve_agent_did(state: &AppState, did: &str) -> Result<String> {
+    let normalized_did = normalize_agent_did(did);
+    if state.db.get_agent(&normalized_did).await?.is_some() {
+        return Ok(normalized_did);
+    }
+
+    let requested_key = agent_key_segment(&normalized_did);
+    let matching_agent = state
+        .db
+        .list_agents(None)
+        .await?
+        .into_iter()
+        .find(|agent| agent_key_segment(&agent.did).starts_with(requested_key));
+
+    Ok(matching_agent
+        .map(|agent| agent.did)
+        .unwrap_or(normalized_did))
+}
+
 #[derive(Debug, Serialize)]
 pub struct TrustResponse {
     pub did: String,
@@ -40,6 +80,8 @@ pub struct AgentResponse {
     pub capabilities: Vec<String>,
     pub registered_at: String,
     pub last_seen: Option<String>,
+    /// Lifecycle status: `active` or `revoked`.
+    pub status: String,
 }
 
 /// GET /api/v1/agents
@@ -48,13 +90,17 @@ pub async fn list_agents(
     Query(params): Query<AgentListQuery>,
 ) -> Result<Json<serde_json::Value>> {
     let agents = state.db.list_agents(params.capability.as_deref()).await?;
-    let list: Vec<AgentResponse> = agents.into_iter().map(|a| AgentResponse {
-        did: a.did,
-        trust_score: a.trust_score,
-        capabilities: a.capabilities,
-        registered_at: a.registered_at,
-        last_seen: a.last_seen,
-    }).collect();
+    let list: Vec<AgentResponse> = agents
+        .into_iter()
+        .map(|a| AgentResponse {
+            did: a.did,
+            trust_score: a.trust_score,
+            capabilities: a.capabilities,
+            registered_at: a.registered_at,
+            last_seen: a.last_seen,
+            status: a.status,
+        })
+        .collect();
     Ok(Json(serde_json::json!({ "agents": list })))
 }
 
@@ -63,15 +109,23 @@ pub async fn show_agent(
     State(state): State<AppState>,
     Path(did): Path<String>,
 ) -> Result<(StatusCode, Json<AgentResponse>)> {
-    let agent = state.db.get_agent(&did).await?
-        .ok_or_else(|| AppError::NotFound(format!("agent {did} not found")))?;
-    Ok((StatusCode::OK, Json(AgentResponse {
-        did: agent.did,
-        trust_score: agent.trust_score,
-        capabilities: agent.capabilities,
-        registered_at: agent.registered_at,
-        last_seen: agent.last_seen,
-    })))
+    let normalized_did = resolve_agent_did(&state, &did).await?;
+    let agent = state
+        .db
+        .get_agent(&normalized_did)
+        .await?
+        .ok_or_else(|| AppError::NotFound(format!("agent {normalized_did} not found")))?;
+    Ok((
+        StatusCode::OK,
+        Json(AgentResponse {
+            did: agent.did,
+            trust_score: agent.trust_score,
+            capabilities: agent.capabilities,
+            registered_at: agent.registered_at,
+            last_seen: agent.last_seen,
+            status: agent.status,
+        }),
+    ))
 }
 
 /// GET /api/v1/agents/{did}/trust
@@ -79,14 +133,126 @@ pub async fn get_trust(
     State(state): State<AppState>,
     Path(did): Path<String>,
 ) -> Result<Json<TrustResponse>> {
-    let trust_score = state.db.get_trust_score(&did).await?;
-    let push_count = state.db.get_push_count(&did).await?;
+    let normalized_did = resolve_agent_did(&state, &did).await?;
+    let trust_score = state.db.get_trust_score(&normalized_did).await?;
+    let push_count = state.db.get_push_count(&normalized_did).await?;
     let level = trust_level(trust_score);
 
     Ok(Json(TrustResponse {
-        did,
+        did: normalized_did,
         trust_score,
         push_count,
         level,
     }))
 }
+
+/// DELETE /api/v1/agents/{did}
+///
+/// Self-deregistration: the holder of a DID's key marks their own agent
+/// `revoked`, removing it from discovery (issue #29). Authenticated by the
+/// rfc9421 signature middleware; a caller may only retire its own DID.
+pub async fn deregister_agent(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path(did): Path<String>,
+) -> Result<StatusCode> {
+    // Authorize on the verified identity, and act on it too. The path DID is
+    // only an intent check (it must name the caller); the row we revoke is the
+    // authenticated DID itself, never a value derived from the untrusted path.
+    // Revoking `resolve_agent_did(did)` instead would let the fuzzy prefix
+    // resolver act on a different identity than the one just authorized.
+    if !caller_matches_did(&auth.0, &did) {
+        return Err(AppError::BadRequest(
+            "an agent can only deregister itself".into(),
+        ));
+    }
+
+    if state.db.revoke_agent(&auth.0).await? {
+        Ok(StatusCode::NO_CONTENT)
+    } else {
+        Err(AppError::NotFound(format!("agent {} not found", auth.0)))
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::{agent_key_segment, caller_matches_did, normalize_agent_did, AgentResponse};
+
+    #[test]
+    fn caller_matches_own_did_full_form() {
+        assert!(caller_matches_did(
+            "did:key:z6MkExample",
+            "did:key:z6MkExample"
+        ));
+    }
+
+    #[test]
+    fn caller_matches_own_did_short_form() {
+        // Authenticated full DID vs short path form, and vice versa.
+        assert!(caller_matches_did("did:key:z6MkExample", "z6MkExample"));
+        assert!(caller_matches_did("z6MkExample", "did:key:z6MkExample"));
+    }
+
+    #[test]
+    fn caller_cannot_revoke_a_different_did() {
+        // The core authorization property for issue #29.
+        assert!(!caller_matches_did(
+            "did:key:z6MkAttacker",
+            "did:key:z6MkVictim"
+        ));
+        assert!(!caller_matches_did("did:key:z6MkAttacker", "z6MkVictim"));
+    }
+
+    #[test]
+    fn agent_response_surfaces_status() {
+        // A revoked DID's response must carry its status so callers can see it
+        // is retired (issue #29).
+        let resp = AgentResponse {
+            did: "did:key:orphan".to_string(),
+            trust_score: 0.1,
+            capabilities: vec!["reputation:score".to_string()],
+            registered_at: "2026-06-19T00:00:00Z".to_string(),
+            last_seen: None,
+            status: "revoked".to_string(),
+        };
+
+        let json = serde_json::to_value(&resp).unwrap();
+
+        assert_eq!(json["status"], "revoked");
+        assert!(json.get("replaced_by").is_none());
+    }
+
+    #[test]
+    fn agent_response_active_status() {
+        let resp = AgentResponse {
+            did: "did:key:active".to_string(),
+            trust_score: 0.5,
+            capabilities: vec![],
+            registered_at: "2026-06-19T00:00:00Z".to_string(),
+            last_seen: None,
+            status: "active".to_string(),
+        };
+
+        let json = serde_json::to_value(&resp).unwrap();
+
+        assert_eq!(json["status"], "active");
+    }
+
+    #[test]
+    fn normalize_agent_did_preserves_full_did() {
+        let did = "did:key:z6MkExample";
+
+        assert_eq!(normalize_agent_did(did), did);
+    }
+
+    #[test]
+    fn normalize_agent_did_expands_bare_key() {
+        assert_eq!(normalize_agent_did("z6MkExample"), "did:key:z6MkExample");
+    }
+
+    #[test]
+    fn agent_key_segment_extracts_did_key_material() {
+        assert_eq!(agent_key_segment("did:key:z6MkExample"), "z6MkExample");
+        assert_eq!(agent_key_segment("z6MkExample"), "z6MkExample");
+    }
+}

crates/gitlawb-node/src/api/arweave.rs

@@ -30,7 +30,7 @@ pub async fn list_anchors(
         .db
         .list_arweave_anchors(q.repo.as_deref(), limit)
         .await
-        .map_err(|e| crate::error::AppError::Internal(e.into()))?;
+        .map_err(crate::error::AppError::Internal)?;
 
     Ok(Json(serde_json::json!({
         "anchors": anchors,

crates/gitlawb-node/src/api/bounties.rs

@@ -79,9 +79,9 @@ pub async fn create_bounty(
         return Err(AppError::BadRequest("amount must be positive".into()));
     }
 
-    // Verify repo exists
-    let _ = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    // Read-gate: anyone who can read the repo may fund a bounty on it (this closes
+    // the private-repo bounty leak); ownership is not required.
+    crate::api::authorize_repo_read(&state, &owner, &repo, Some(auth.0.as_str()), "/").await?;
 
     let now = Utc::now().to_rfc3339();
     let bounty = BountyRecord {
@@ -110,18 +110,30 @@ pub async fn create_bounty(
     Ok((StatusCode::CREATED, Json(bounty)))
 }
 
+const MAX_BOUNTY_LIMIT: i64 = 200;
+
 /// GET /api/v1/repos/{owner}/{repo}/bounties
 pub async fn list_repo_bounties(
     State(state): State<AppState>,
     Path((owner, repo)): Path<(String, String)>,
     Query(q): Query<ListBountiesQuery>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let bounties = state.db.list_bounties(
-        Some(&owner),
-        Some(&repo),
-        q.status.as_deref(),
-        q.limit.unwrap_or(50),
-    ).await?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
+
+    let limit = q.limit.unwrap_or(50).clamp(1, MAX_BOUNTY_LIMIT);
+    let bounties = state
+        .db
+        .list_bounties(
+            Some(&owner),
+            Some(&repo),
+            q.status.as_deref(),
+            limit,
+            None,
+            None,
+        )
+        .await?;
 
     Ok(Json(serde_json::json!({ "bounties": bounties })))
 }
@@ -130,24 +142,92 @@ pub async fn list_repo_bounties(
 pub async fn list_all_bounties(
     State(state): State<AppState>,
     Query(q): Query<ListBountiesQuery>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let bounties = state.db.list_bounties(
-        None,
-        None,
-        q.status.as_deref(),
-        q.limit.unwrap_or(50),
-    ).await?;
+    let raw_limit = q.limit.unwrap_or(50);
+    let limit = raw_limit.clamp(1, MAX_BOUNTY_LIMIT);
 
-    Ok(Json(serde_json::json!({ "bounties": bounties })))
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let mut memo = std::collections::HashMap::new();
+    let mut allowed: Vec<BountyRecord> = Vec::new();
+    let page_size = (limit * 5).clamp(1, 200);
+    let max_scanned = 10_000i64;
+    let mut total_scanned: i64 = 0;
+    let mut cursor: Option<(String, String)> = None;
+
+    while (allowed.len() as i64) < limit {
+        let after = cursor.as_ref().map(|(ts, id)| (ts.as_str(), id.as_str()));
+        let bounties = state
+            .db
+            .list_bounties(
+                None,
+                None,
+                q.status.as_deref(),
+                page_size,
+                after.map(|(ts, _)| ts),
+                after.map(|(_, id)| id),
+            )
+            .await?;
+        if bounties.is_empty() {
+            break;
+        }
+
+        total_scanned += bounties.len() as i64;
+        if total_scanned > max_scanned {
+            return Err(AppError::Incomplete(
+                "too many rows scanned; refine your filters".into(),
+            ));
+        }
+
+        let last = bounties.last().unwrap();
+        for b in &bounties {
+            if (allowed.len() as i64) >= limit {
+                break;
+            }
+            let key = format!("{}/{}", b.repo_owner, b.repo_name);
+            let admitted = if let Some(&result) = memo.get(&key) {
+                result
+            } else {
+                let result = crate::api::authorize_repo_read(
+                    &state,
+                    &b.repo_owner,
+                    &b.repo_name,
+                    caller,
+                    "/",
+                )
+                .await
+                .is_ok();
+                memo.insert(key, result);
+                result
+            };
+            if admitted {
+                allowed.push(b.clone());
+            }
+        }
+        cursor = Some((last.created_at.clone(), last.id.clone()));
+    }
+
+    Ok(Json(serde_json::json!({ "bounties": allowed })))
 }
 
 /// GET /api/v1/bounties/{id}
 pub async fn get_bounty(
     State(state): State<AppState>,
     Path(id): Path<String>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
-        .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
+    let not_found = || AppError::NotFound(format!("bounty {id} not found"));
+
+    let bounty = state.db.get_bounty(&id).await?.ok_or_else(not_found)?;
+
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    if crate::api::authorize_repo_read(&state, &bounty.repo_owner, &bounty.repo_name, caller, "/")
+        .await
+        .is_err()
+    {
+        return Err(not_found());
+    }
+
     Ok(Json(bounty))
 }
 
@@ -158,19 +238,42 @@ pub async fn claim_bounty(
     Path(id): Path<String>,
     Json(req): Json<ClaimBountyRequest>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
-        .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
+    let not_found = || AppError::NotFound(format!("bounty {id} not found"));
+
+    let bounty = state.db.get_bounty(&id).await?.ok_or_else(not_found)?;
+
+    if crate::api::authorize_repo_read(
+        &state,
+        &bounty.repo_owner,
+        &bounty.repo_name,
+        Some(auth.0.as_str()),
+        "/",
+    )
+    .await
+    .is_err()
+    {
+        return Err(not_found());
+    }
 
     if bounty.status != "open" {
-        return Err(AppError::BadRequest(format!("bounty is {}, not open", bounty.status)));
+        return Err(AppError::BadRequest(format!(
+            "bounty is {}, not open",
+            bounty.status
+        )));
     }
 
     let now = Utc::now().to_rfc3339();
-    state.db.claim_bounty(&id, &auth.0, req.wallet.as_deref(), &now).await?;
+    state
+        .db
+        .claim_bounty(&id, &auth.0, req.wallet.as_deref(), &now)
+        .await?;
 
     tracing::info!(bounty_id = %id, agent = %auth.0, "bounty claimed");
 
-    let updated = state.db.get_bounty(&id).await?
+    let updated = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
     Ok(Json(updated))
 }
@@ -182,14 +285,24 @@ pub async fn submit_bounty(
     Path(id): Path<String>,
     Json(req): Json<SubmitBountyRequest>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
+    let bounty = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
 
     if bounty.status != "claimed" {
-        return Err(AppError::BadRequest(format!("bounty is {}, not claimed", bounty.status)));
+        return Err(AppError::BadRequest(format!(
+            "bounty is {}, not claimed",
+            bounty.status
+        )));
     }
-    if bounty.claimant_did.as_deref() != Some(&auth.0) {
-        return Err(AppError::BadRequest("only the claimant can submit".into()));
+    let is_claimant = bounty
+        .claimant_did
+        .as_deref()
+        .is_some_and(|c| crate::api::did_matches(&auth.0, c));
+    if !is_claimant {
+        return Err(AppError::Forbidden("only the claimant can submit".into()));
     }
 
     let now = Utc::now().to_rfc3339();
@@ -197,7 +310,10 @@ pub async fn submit_bounty(
 
     tracing::info!(bounty_id = %id, pr_id = %req.pr_id, "bounty submission");
 
-    let updated = state.db.get_bounty(&id).await?
+    let updated = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
     Ok(Json(updated))
 }
@@ -209,18 +325,29 @@ pub async fn approve_bounty(
     Path(id): Path<String>,
     Json(req): Json<ApproveBountyRequest>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
+    let bounty = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
 
     if bounty.status != "submitted" {
-        return Err(AppError::BadRequest(format!("bounty is {}, not submitted", bounty.status)));
+        return Err(AppError::BadRequest(format!(
+            "bounty is {}, not submitted",
+            bounty.status
+        )));
     }
-    if bounty.creator_did != auth.0 {
-        return Err(AppError::BadRequest("only the bounty creator can approve".into()));
+    if !crate::api::did_matches(&auth.0, &bounty.creator_did) {
+        return Err(AppError::Forbidden(
+            "only the bounty creator can approve".into(),
+        ));
     }
 
     let now = Utc::now().to_rfc3339();
-    state.db.approve_bounty(&id, &now, req.tx_hash.as_deref()).await?;
+    state
+        .db
+        .approve_bounty(&id, &now, req.tx_hash.as_deref())
+        .await?;
 
     // Bump claimant trust score
     if let Some(ref agent_did) = bounty.claimant_did {
@@ -231,7 +358,10 @@ pub async fn approve_bounty(
 
     tracing::info!(bounty_id = %id, "bounty approved");
 
-    let updated = state.db.get_bounty(&id).await?
+    let updated = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
     Ok(Json(updated))
 }
@@ -242,20 +372,31 @@ pub async fn cancel_bounty(
     Extension(auth): Extension<AuthenticatedDid>,
     Path(id): Path<String>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
+    let bounty = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
 
     if bounty.status != "open" {
-        return Err(AppError::BadRequest(format!("can only cancel open bounties, status is {}", bounty.status)));
+        return Err(AppError::BadRequest(format!(
+            "can only cancel open bounties, status is {}",
+            bounty.status
+        )));
     }
-    if bounty.creator_did != auth.0 {
-        return Err(AppError::BadRequest("only the bounty creator can cancel".into()));
+    if !crate::api::did_matches(&auth.0, &bounty.creator_did) {
+        return Err(AppError::Forbidden(
+            "only the bounty creator can cancel".into(),
+        ));
     }
 
     state.db.cancel_bounty(&id).await?;
     tracing::info!(bounty_id = %id, "bounty cancelled");
 
-    let updated = state.db.get_bounty(&id).await?
+    let updated = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
     Ok(Json(updated))
 }
@@ -263,13 +404,33 @@ pub async fn cancel_bounty(
 /// POST /api/v1/bounties/{id}/dispute
 pub async fn dispute_bounty(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path(id): Path<String>,
 ) -> Result<Json<BountyRecord>> {
-    let bounty = state.db.get_bounty(&id).await?
+    let bounty = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
 
     if bounty.status != "claimed" && bounty.status != "submitted" {
-        return Err(AppError::BadRequest(format!("can only dispute claimed/submitted bounties, status is {}", bounty.status)));
+        return Err(AppError::BadRequest(format!(
+            "can only dispute claimed/submitted bounties, status is {}",
+            bounty.status
+        )));
+    }
+
+    // Only the bounty creator or the current claimant may dispute (N19 — this
+    // endpoint had no identity check at all).
+    let is_creator = crate::api::did_matches(&auth.0, &bounty.creator_did);
+    let is_claimant = bounty
+        .claimant_did
+        .as_deref()
+        .is_some_and(|c| crate::api::did_matches(&auth.0, c));
+    if !is_creator && !is_claimant {
+        return Err(AppError::Forbidden(
+            "only the bounty creator or claimant can dispute this bounty".into(),
+        ));
     }
 
     // Check if deadline exceeded
@@ -277,33 +438,47 @@ pub async fn dispute_bounty(
         if let Ok(claimed) = chrono::DateTime::parse_from_rfc3339(claimed_at) {
             let deadline = claimed + chrono::Duration::seconds(bounty.deadline_secs);
             if Utc::now() < deadline {
-                return Err(AppError::BadRequest("deadline has not been exceeded yet".into()));
+                return Err(AppError::BadRequest(
+                    "deadline has not been exceeded yet".into(),
+                ));
             }
         }
     }
 
     state.db.dispute_bounty(&id).await?;
-    tracing::info!(bounty_id = %id, "bounty disputed — reopened");
+    tracing::info!(bounty_id = %id, actor = %auth.0, "bounty disputed - reopened");
 
-    let updated = state.db.get_bounty(&id).await?
+    let updated = state
+        .db
+        .get_bounty(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("bounty {id} not found")))?;
     Ok(Json(updated))
 }
 
 /// GET /api/v1/bounties/stats
-pub async fn bounty_stats(
-    State(state): State<AppState>,
-) -> Result<Json<BountyStatsResponse>> {
+pub async fn bounty_stats(State(state): State<AppState>) -> Result<Json<BountyStatsResponse>> {
     let open = state.db.count_bounties_by_status("open").await.unwrap_or(0);
-    let claimed = state.db.count_bounties_by_status("claimed").await.unwrap_or(0);
-    let completed = state.db.count_bounties_by_status("completed").await.unwrap_or(0);
+    let claimed = state
+        .db
+        .count_bounties_by_status("claimed")
+        .await
+        .unwrap_or(0);
+    let completed = state
+        .db
+        .count_bounties_by_status("completed")
+        .await
+        .unwrap_or(0);
 
     let leaders = state.db.bounty_leaderboard(10).await.unwrap_or_default();
-    let leaderboard = leaders.into_iter().map(|(did, cnt, total)| AgentBountyEntry {
-        did,
-        completed: cnt,
-        total_earned: total,
-    }).collect();
+    let leaderboard = leaders
+        .into_iter()
+        .map(|(did, cnt, total)| AgentBountyEntry {
+            did,
+            completed: cnt,
+            total_earned: total,
+        })
+        .collect();
 
     Ok(Json(BountyStatsResponse {
         open,

crates/gitlawb-node/src/api/certs.rs

@@ -1,47 +1,87 @@
 //! API handlers for ref certificates.
 
-use axum::extract::{Path, State};
+use std::collections::HashMap;
+
+use axum::extract::{Extension, Path, Query, State};
 use axum::Json;
 
+use crate::auth::AuthenticatedDid;
 use crate::error::{AppError, Result};
 use crate::state::AppState;
 
-/// GET /api/v1/repos/{owner}/{repo}/certs
+/// GET /api/v1/repos/{owner}/{repo}/certs?limit=50
 pub async fn list_certs(
     State(state): State<AppState>,
     Path((owner, name)): Path<(String, String)>,
+    Query(params): Query<HashMap<String, String>>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let limit = params
+        .get("limit")
+        .and_then(|v| v.parse::<i64>().ok())
+        .map(|v| v.max(1))
+        .unwrap_or(50)
+        .min(200);
 
-    let certs = state.db.list_ref_certificates(&record.id).await?;
-    let certs_json: Vec<serde_json::Value> = certs.iter().map(|c| serde_json::json!({
-        "id":         c.id,
-        "repo_id":    c.repo_id,
-        "ref_name":   c.ref_name,
-        "old_sha":    c.old_sha,
-        "new_sha":    c.new_sha,
-        "pusher_did": c.pusher_did,
-        "node_did":   c.node_did,
-        "signature":  c.signature,
-        "issued_at":  c.issued_at,
-    })).collect();
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    Ok(Json(serde_json::json!({ "certificates": certs_json })))
+    // When a prefix is given (short-ID resolution from the CLI) use a
+    // generous limit and delegate to the prefix-matched query so the
+    // caller can resolve IDs regardless of how many certs exist.
+    let prefix = params.get("prefix").filter(|p| !p.is_empty());
+    let certs = if let Some(prefix) = prefix {
+        state
+            .db
+            .list_ref_certificates_by_prefix(&record.id, prefix, 200)
+            .await?
+    } else {
+        state.db.list_ref_certificates(&record.id, limit).await?
+    };
+    let certs_json: Vec<serde_json::Value> = certs
+        .iter()
+        .map(|c| {
+            serde_json::json!({
+                "id":         c.id,
+                "repo_id":    c.repo_id,
+                "ref_name":   c.ref_name,
+                "old_sha":    c.old_sha,
+                "new_sha":    c.new_sha,
+                "pusher_did": c.pusher_did,
+                "node_did":   c.node_did,
+                "signature":  c.signature,
+                "issued_at":  c.issued_at,
+            })
+        })
+        .collect();
+
+    let count = certs_json.len();
+    Ok(Json(
+        serde_json::json!({ "certificates": certs_json, "count": count }),
+    ))
 }
 
 /// GET /api/v1/repos/{owner}/{repo}/certs/{id}
 pub async fn get_cert(
     State(state): State<AppState>,
     Path((owner, name, id)): Path<(String, String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    // Verify the repo exists
-    let _record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    let cert = state.db.get_ref_certificate(&id).await?
+    let cert = state
+        .db
+        .get_ref_certificate(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("certificate {id}")))?;
 
+    if cert.repo_id != record.id {
+        return Err(AppError::NotFound(format!("certificate {id}")));
+    }
+
     Ok(Json(serde_json::json!({
         "id":         cert.id,
         "repo_id":    cert.repo_id,

crates/gitlawb-node/src/api/changelog.rs

@@ -1,9 +1,10 @@
 //! Changelog endpoint — unified timeline of commits, merged PRs, and closed issues.
 
-use axum::extract::{Path, Query, State};
+use axum::extract::{Extension, Path, Query, State};
 use axum::Json;
 use serde::Deserialize;
 
+use crate::auth::AuthenticatedDid;
 use crate::error::{AppError, Result};
 use crate::git::store;
 use crate::state::AppState;
@@ -14,7 +15,9 @@ pub struct ChangelogQuery {
     pub limit: usize,
 }
 
-fn default_limit() -> usize { 20 }
+fn default_limit() -> usize {
+    20
+}
 
 /// GET /api/v1/repos/:owner/:repo/changelog[?limit=N]
 ///
@@ -25,28 +28,36 @@ pub async fn get_changelog(
     State(state): State<AppState>,
     Path((owner, repo)): Path<(String, String)>,
     Query(query): Query<ChangelogQuery>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
 
     let limit = query.limit.min(100);
 
     // ── Commits from git log ─────────────────────────────────────────────
-    let disk_path = state.repo_store.acquire(&record.owner_did, &record.name).await
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
         .map_err(|e| AppError::Git(e.to_string()))?;
     let head_ref = store::resolve_head(&disk_path, &record.default_branch);
     let commits = store::log(&disk_path, &head_ref, limit).unwrap_or_default();
 
-    let mut events: Vec<serde_json::Value> = commits.into_iter().map(|c| {
-        serde_json::json!({
-            "type": "commit",
-            "sha": c.hash,
-            "message": c.subject,
-            "author": c.author_name,
-            "timestamp": c.timestamp,
-            "branch": record.default_branch,
+    let mut events: Vec<serde_json::Value> = commits
+        .into_iter()
+        .map(|c| {
+            serde_json::json!({
+                "type": "commit",
+                "sha": c.hash,
+                "message": c.subject,
+                "author": c.author_name,
+                "timestamp": c.timestamp,
+                "branch": record.default_branch,
+            })
         })
-    }).collect();
+        .collect();
 
     // ── Merged PRs ───────────────────────────────────────────────────────
     let prs = state.db.list_prs(&record.id).await.unwrap_or_default();

crates/gitlawb-node/src/api/encrypted.rs

@@ -0,0 +1,123 @@
+//! Authenticated discovery + fetch for encrypted withheld blobs (Option B1).
+
+use axum::extract::{Extension, Path, State};
+use axum::Json;
+
+use crate::auth::AuthenticatedDid;
+use crate::error::{AppError, Result};
+use crate::state::AppState;
+use crate::visibility::{visibility_check, Decision};
+
+/// GET /api/v1/repos/{owner}/{repo}/encrypted-blobs
+/// Returns [{oid, cid}] for every encrypted blob in the repo, to any caller who
+/// can read the repo. Not recipient-scoped: recipient identities are not stored,
+/// so access control here is repo readability and decryption is gated by the
+/// envelope crypto (only a real recipient can open an envelope).
+pub async fn list_encrypted_blobs(
+    State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    if visibility_check(&rules, record.is_public, &record.owner_did, caller, "/") == Decision::Deny
+    {
+        return Err(AppError::RepoNotFound(format!("{owner}/{repo}")));
+    }
+    let rows = state.db.list_all_encrypted_blobs(&record.id).await?;
+    let blobs: Vec<_> = rows
+        .into_iter()
+        .map(|(oid, cid)| serde_json::json!({ "oid": oid, "cid": cid }))
+        .collect();
+    Ok(Json(serde_json::json!({ "blobs": blobs })))
+}
+
+/// GET /api/v1/repos/{owner}/{repo}/encrypted-blob/{oid}
+/// Returns raw envelope bytes to callers who can read the repo; the envelope
+/// crypto still ensures only true recipients can decrypt.
+pub async fn get_encrypted_blob(
+    State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
+    Path((owner, repo, oid)): Path<(String, String, String)>,
+) -> Result<Vec<u8>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    if visibility_check(&rules, record.is_public, &record.owner_did, caller, "/") == Decision::Deny
+    {
+        return Err(AppError::RepoNotFound(format!("{owner}/{repo}/{oid}")));
+    }
+    let cid = state
+        .db
+        .encrypted_blob_cid(&record.id, &oid)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}/{oid}")))?;
+    let bytes = crate::ipfs_pin::cat(&state.config.ipfs_api, &cid)
+        .await
+        .map_err(|e| AppError::Git(e.to_string()))?;
+    Ok(bytes)
+}
+
+/// GET /api/v1/repos/{owner}/{repo}/encrypted-blobs/replicate
+/// Returns [{oid, cid}] for every encrypted blob in the repo, for peer-mirror
+/// replication (Option B2). Gated by repo readability, like discovery, so a
+/// non-readable repo does not expose its blob index; for the intended case (a
+/// public repo with withheld subtrees) the public root keeps this open to peers.
+/// Recipient identities are deliberately withheld: the v2 envelopes no longer
+/// carry recipient public keys, so peers must not learn the reader set either. A
+/// mirror detects a re-seal by the CID changing (the OID is stable across
+/// re-seals). Ciphertext metadata only, never plaintext.
+pub async fn replicate_encrypted_blobs(
+    State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    if visibility_check(&rules, record.is_public, &record.owner_did, caller, "/") == Decision::Deny
+    {
+        return Err(AppError::RepoNotFound(format!("{owner}/{repo}")));
+    }
+    let rows = state.db.list_all_encrypted_blobs(&record.id).await?;
+    let blobs: Vec<_> = rows
+        .into_iter()
+        .map(|(oid, cid)| replicate_blob_json(oid, cid))
+        .collect();
+    Ok(Json(serde_json::json!({ "blobs": blobs })))
+}
+
+/// Serialize one blob for the replication wire. Recipient identities are
+/// intentionally absent so a mirror never learns the reader set.
+fn replicate_blob_json(oid: String, cid: String) -> serde_json::Value {
+    serde_json::json!({ "oid": oid, "cid": cid })
+}
+
+#[cfg(test)]
+mod tests {
+    use super::replicate_blob_json;
+
+    #[test]
+    fn replicate_blob_json_omits_recipients() {
+        let v = replicate_blob_json("oid1".into(), "cidA".into());
+        assert_eq!(v["oid"], "oid1");
+        assert_eq!(v["cid"], "cidA");
+        assert!(
+            v.get("recipients").is_none(),
+            "replication wire must not carry recipient identities"
+        );
+    }
+}

crates/gitlawb-node/src/api/issues.rs

@@ -10,8 +10,8 @@ use uuid::Uuid;
 use crate::auth::AuthenticatedDid;
 use crate::db::IssueComment;
 use crate::error::{AppError, Result};
-use crate::state::AppState;
 use crate::git::issues as git_issues;
+use crate::state::AppState;
 
 #[derive(Debug, Deserialize)]
 pub struct CreateIssueRequest {
@@ -39,8 +39,11 @@ pub async fn create_issue(
     Path((owner, repo)): Path<(String, String)>,
     Json(req): Json<CreateIssueRequest>,
 ) -> Result<(StatusCode, Json<IssueRecord>)> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    // Authorize the caller as a reader before accepting an issue: a non-reader
+    // must not be able to file an issue against a private repo they cannot read.
+    // Mirrors create_issue_comment / create_review / create_bounty.
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, Some(auth.0.as_str()), "/").await?;
 
     let issue_id = Uuid::new_v4().to_string();
     let now = Utc::now().to_rfc3339();
@@ -58,14 +61,20 @@ pub async fn create_issue(
     let json_str = serde_json::to_string(&issue)
         .map_err(|e| AppError::BadRequest(format!("serialization error: {e}")))?;
 
-    let guard = state.repo_store.acquire_write(&record.owner_did, &record.name).await
-        .map_err(|e| AppError::Git(e.to_string()))?;
+    // Shed 503 + Retry-After on an exhausted write-lock POOL instead of a generic
+    // git 500 (#173 F1). This path holds no admission permit, so it reaches the pool
+    // unthrottled; reuse the push handler's mapping so the two cannot drift.
+    let guard = state
+        .repo_store
+        .acquire_write(&record.owner_did, &record.name)
+        .await
+        .map_err(|e| crate::api::repos::acquire_write_app_error(&e, &repo))?;
     let disk_path = guard.path().to_path_buf();
 
     let create_result = git_issues::create_issue(&disk_path, &issue_id, &json_str);
 
-    // Always release the advisory lock — even on error
-    guard.release().await;
+    // Always release the advisory lock — even on error; upload to Tigris only on success.
+    guard.release(create_result.is_ok()).await;
 
     create_result.map_err(|e| AppError::Git(e.to_string()))?;
 
@@ -84,15 +93,20 @@ pub async fn create_issue(
 pub async fn list_issues(
     State(state): State<AppState>,
     Path((owner, repo)): Path<(String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
 
-    let disk_path = state.repo_store.acquire(&record.owner_did, &record.name).await
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
         .map_err(|e| AppError::Git(e.to_string()))?;
 
-    let raw_issues = git_issues::list_issues(&disk_path)
-        .map_err(|e| AppError::Git(e.to_string()))?;
+    let raw_issues =
+        git_issues::list_issues(&disk_path).map_err(|e| AppError::Git(e.to_string()))?;
 
     let mut issues: Vec<serde_json::Value> = Vec::new();
     for raw in raw_issues {
@@ -108,11 +122,16 @@ pub async fn list_issues(
 pub async fn get_issue(
     State(state): State<AppState>,
     Path((owner, repo, issue_id)): Path<(String, String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
 
-    let disk_path = state.repo_store.acquire(&record.owner_did, &record.name).await
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
         .map_err(|e| AppError::Git(e.to_string()))?;
 
     let raw = git_issues::get_issue(&disk_path, &issue_id)
@@ -138,13 +157,19 @@ pub async fn create_issue_comment(
     Json(req): Json<CreateIssueCommentRequest>,
 ) -> Result<(StatusCode, Json<IssueComment>)> {
     if req.body.trim().is_empty() {
-        return Err(AppError::BadRequest("comment body must not be empty".into()));
+        return Err(AppError::BadRequest(
+            "comment body must not be empty".into(),
+        ));
     }
 
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    // Read-gate: a commenter must be able to read the repo, but need not own it.
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, Some(auth.0.as_str()), "/").await?;
 
-    let disk_path = state.repo_store.acquire(&record.owner_did, &record.name).await
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
         .map_err(|e| AppError::Git(e.to_string()))?;
     // Verify issue exists
     crate::git::issues::get_issue(&disk_path, &issue_id)
@@ -167,31 +192,86 @@ pub async fn create_issue_comment(
 pub async fn list_issue_comments(
     State(state): State<AppState>,
     Path((owner, repo, issue_id)): Path<(String, String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let _record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
 
-    let comments = state.db.list_issue_comments(&issue_id).await?;
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
+        .map_err(|e| AppError::Git(e.to_string()))?;
+    // Resolve the full issue ID (accepts 8-char prefix) so the DB fetch
+    // below uses the same canonical id as the git ref.
+    let full_id = match git_issues::resolve_issue_id(&disk_path, &issue_id)
+        .map_err(|e| AppError::Git(e.to_string()))?
+    {
+        Some(id) => id,
+        None => {
+            return Err(AppError::RepoNotFound(format!(
+                "issue {issue_id} not found"
+            )))
+        }
+    };
+
+    let comments = state.db.list_issue_comments(&full_id).await?;
     Ok(Json(serde_json::json!({ "comments": comments })))
 }
 
 /// POST /api/v1/repos/{owner}/{repo}/issues/{id}/close
 pub async fn close_issue(
     State(state): State<AppState>,
-    Extension(_auth): Extension<AuthenticatedDid>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, repo, issue_id)): Path<(String, String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
 
-    let guard = state.repo_store.acquire_write(&record.owner_did, &record.name).await
-        .map_err(|e| AppError::Git(e.to_string()))?;
+    // Same capacity shed as create_issue above (#173 F1): an exhausted write-lock
+    // pool is a 503 + Retry-After, not a 500 git error.
+    let guard = state
+        .repo_store
+        .acquire_write(&record.owner_did, &record.name)
+        .await
+        .map_err(|e| crate::api::repos::acquire_write_app_error(&e, &repo))?;
     let disk_path = guard.path().to_path_buf();
 
+    // Owner OR issue author may close. The author lives in the issue's git-JSON
+    // blob (not a DB column); a None author (legacy issues) falls back to
+    // owner-only. Read it under the write guard, before mutating.
+    let author_did: Option<String> = match git_issues::get_issue(&disk_path, &issue_id) {
+        Ok(Some(raw)) => serde_json::from_str::<IssueRecord>(&raw)
+            .ok()
+            .and_then(|i| i.author),
+        Ok(None) => {
+            guard.release(false).await;
+            return Err(AppError::NotFound(format!("issue {issue_id} not found")));
+        }
+        Err(e) => {
+            guard.release(false).await;
+            return Err(AppError::Git(e.to_string()));
+        }
+    };
+    let is_owner = crate::api::require_repo_owner(&record, &auth.0).is_ok();
+    let is_author = author_did
+        .as_deref()
+        .is_some_and(|a| crate::api::did_matches(&auth.0, a));
+    if !is_owner && !is_author {
+        guard.release(false).await;
+        return Err(AppError::Forbidden(
+            "only the repo owner or the issue author can close this issue".into(),
+        ));
+    }
+
     let close_result = git_issues::close_issue(&disk_path, &issue_id);
 
-    // Always release the advisory lock — even on error
-    guard.release().await;
+    // Always release the advisory lock — even on error; upload to Tigris only on success.
+    guard.release(close_result.is_ok()).await;
 
     let updated = close_result
         .map_err(|e| AppError::Git(e.to_string()))?
@@ -204,3 +284,168 @@ pub async fn close_issue(
 
     Ok(Json(issue))
 }
+
+/// #173 F1 follow-up: the two issue write paths reach `acquire_write` holding NO
+/// admission permit (unlike the push handler, which is capped by the git-push
+/// semaphore), so they are the callers most likely to meet an exhausted write-lock
+/// POOL under load. An exhausted pool is a capacity signal, so both must shed
+/// 503 + Retry-After (`AppError::Overloaded`) the way the push handler does, not
+/// report the generic 500 git error that says nothing about retrying.
+#[cfg(test)]
+mod lock_pool_shed_tests {
+    use super::*;
+    use axum::response::IntoResponse;
+    use sqlx::PgPool;
+
+    fn seed_repo(owner_did: &str, name: &str) -> crate::db::RepoRecord {
+        let now = Utc::now();
+        crate::db::RepoRecord {
+            id: Uuid::new_v4().to_string(),
+            name: name.to_string(),
+            owner_did: owner_did.to_string(),
+            description: None,
+            is_public: true,
+            default_branch: "main".to_string(),
+            created_at: now,
+            updated_at: now,
+            disk_path: format!("/tmp/{name}"),
+            forked_from: None,
+            machine_id: None,
+        }
+    }
+
+    /// State whose repo store draws write locks from a ONE-connection pool with a
+    /// short checkout timeout, so a single held guard exhausts it promptly rather
+    /// than at the pool default.
+    async fn one_connection_lock_pool_state(pool: &PgPool) -> AppState {
+        let mut state = crate::test_support::test_state(pool.clone()).await;
+        state.repo_store = crate::git::repo_store::RepoStore::new(
+            std::path::PathBuf::from("/tmp/gitlawb-issues-lockpool"),
+            None,
+            crate::git::repo_store::build_lock_pool(pool, 1, std::time::Duration::from_secs(1)),
+        );
+        state
+    }
+
+    /// The shed must be a real 503 carrying Retry-After, not just an internal enum
+    /// variant: assert on the rendered response so a remapping of `Overloaded` is
+    /// caught here too.
+    fn assert_sheds_503_with_retry_after(err: AppError, what: &str) {
+        let resp = err.into_response();
+        assert_eq!(
+            resp.status(),
+            StatusCode::SERVICE_UNAVAILABLE,
+            "{what}: an exhausted write-lock pool must shed 503, not a 500 git error"
+        );
+        assert_eq!(
+            resp.headers()
+                .get("retry-after")
+                .map(|v| v.to_str().unwrap()),
+            Some("1"),
+            "{what}: a capacity shed must tell the client when to retry"
+        );
+    }
+
+    /// RED-before/GREEN-after for `create_issue`. Both directions: the shed while the
+    /// only lock-pool connection is held by a guard on a DIFFERENT repo (so this is
+    /// pool capacity, not advisory-lock contention on this repo), and the must-not
+    /// case once that connection is back.
+    #[sqlx::test]
+    async fn create_issue_lock_pool_exhaustion_sheds_503_not_500(pool: PgPool) {
+        let owner = "did:key:zISSUECREATELOCKPOOLAAAAAAAAAAAAAAAAAAAA";
+        let state = one_connection_lock_pool_state(&pool).await;
+        state
+            .db
+            .create_repo(&seed_repo(owner, "lp-create"))
+            .await
+            .expect("seed repo");
+
+        let held = state
+            .repo_store
+            .acquire_write(owner, "other-repo")
+            .await
+            .expect("the first write takes the only lock-pool connection");
+
+        let shed = create_issue(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((owner.to_string(), "lp-create".to_string())),
+            Json(CreateIssueRequest {
+                title: "t".to_string(),
+                body: None,
+                signed_payload: None,
+            }),
+        )
+        .await;
+        let err = shed.expect_err("an exhausted lock pool must fail the call");
+        assert_sheds_503_with_retry_after(err, "create_issue");
+
+        // MUST-NOT: with the pool free again the call is not shed as capacity (it
+        // fails later on the nonexistent on-disk repo, which is a git 500).
+        held.release(false).await;
+        let admitted = create_issue(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((owner.to_string(), "lp-create".to_string())),
+            Json(CreateIssueRequest {
+                title: "t".to_string(),
+                body: None,
+                signed_payload: None,
+            }),
+        )
+        .await;
+        assert!(
+            !matches!(admitted, Err(AppError::Overloaded(_))),
+            "with the lock pool free, create_issue must not be shed as capacity; got {:?}",
+            admitted.err()
+        );
+    }
+
+    /// RED-before/GREEN-after for `close_issue`, same two directions.
+    #[sqlx::test]
+    async fn close_issue_lock_pool_exhaustion_sheds_503_not_500(pool: PgPool) {
+        let owner = "did:key:zISSUECLOSELOCKPOOLBBBBBBBBBBBBBBBBBBBBB";
+        let state = one_connection_lock_pool_state(&pool).await;
+        state
+            .db
+            .create_repo(&seed_repo(owner, "lp-close"))
+            .await
+            .expect("seed repo");
+
+        let held = state
+            .repo_store
+            .acquire_write(owner, "other-repo")
+            .await
+            .expect("the first write takes the only lock-pool connection");
+
+        let shed = close_issue(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((
+                owner.to_string(),
+                "lp-close".to_string(),
+                "deadbeef".to_string(),
+            )),
+        )
+        .await;
+        let err = shed.expect_err("an exhausted lock pool must fail the call");
+        assert_sheds_503_with_retry_after(err, "close_issue");
+
+        held.release(false).await;
+        let admitted = close_issue(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((
+                owner.to_string(),
+                "lp-close".to_string(),
+                "deadbeef".to_string(),
+            )),
+        )
+        .await;
+        assert!(
+            !matches!(admitted, Err(AppError::Overloaded(_))),
+            "with the lock pool free, close_issue must not be shed as capacity; got {:?}",
+            admitted.err()
+        );
+    }
+}

crates/gitlawb-node/src/api/labels.rs

@@ -17,7 +17,7 @@ pub struct LabelRequest {
 /// POST /api/v1/repos/:owner/:repo/labels
 pub async fn add_label(
     State(state): State<AppState>,
-    Extension(_auth): Extension<AuthenticatedDid>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, name)): Path<(String, String)>,
     Json(req): Json<LabelRequest>,
 ) -> Result<(StatusCode, Json<serde_json::Value>)> {
@@ -25,28 +25,46 @@ pub async fn add_label(
     if label.is_empty() || label.len() > 50 {
         return Err(AppError::BadRequest("label must be 1–50 characters".into()));
     }
-    if !label.chars().all(|c| c.is_alphanumeric() || c == '-' || c == ':') {
+    if !label
+        .chars()
+        .all(|c| c.is_alphanumeric() || c == '-' || c == ':')
+    {
         return Err(AppError::BadRequest(
             "label must contain only alphanumeric characters, hyphens, and colons".into(),
         ));
     }
 
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    crate::api::require_repo_owner(&record, &auth.0)?;
 
     let added = state.db.add_label(&record.id, &label).await?;
-    let status = if added { StatusCode::CREATED } else { StatusCode::OK };
-    Ok((status, Json(serde_json::json!({ "label": label, "added": added }))))
+    let status = if added {
+        StatusCode::CREATED
+    } else {
+        StatusCode::OK
+    };
+    Ok((
+        status,
+        Json(serde_json::json!({ "label": label, "added": added })),
+    ))
 }
 
 /// DELETE /api/v1/repos/:owner/:repo/labels/:label
 pub async fn remove_label(
     State(state): State<AppState>,
-    Extension(_auth): Extension<AuthenticatedDid>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, name, label)): Path<(String, String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    crate::api::require_repo_owner(&record, &auth.0)?;
 
     state.db.remove_label(&record.id, &label).await?;
     Ok(Json(serde_json::json!({ "label": label, "removed": true })))
@@ -56,9 +74,11 @@ pub async fn remove_label(
 pub async fn list_labels(
     State(state): State<AppState>,
     Path((owner, name)): Path<(String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
     let labels = state.db.list_labels(&record.id).await?;
     Ok(Json(serde_json::json!({ "labels": labels })))

crates/gitlawb-node/src/api/mod.rs

@@ -1,18 +1,691 @@
+use crate::db::{RepoRecord, VisibilityRule};
+use crate::error::{AppError, Result};
+use crate::state::AppState;
+use crate::visibility::{visibility_check, Decision};
+
 pub mod agents;
 pub mod arweave;
 pub mod bounties;
 pub mod certs;
 pub mod changelog;
+pub mod encrypted;
 pub mod events;
 pub mod ipfs;
 pub mod issues;
 pub mod labels;
 pub mod peers;
+pub mod profiles;
 pub mod protect;
 pub mod pulls;
 pub mod register;
+pub mod replicas;
 pub mod repos;
 pub mod resolve;
 pub mod stars;
 pub mod tasks;
+pub mod visibility;
 pub mod webhooks;
+
+/// Resolve a repo for a read request and enforce path-scoped visibility.
+///
+/// Returns 404 (`RepoNotFound`) if the repo does not exist or the caller may not
+/// read `path`, using the same opaque response the git serve path returns so
+/// existence is not confirmed. Returns the record and its visibility rules so a
+/// content handler can apply an extra per-path check without a second DB query.
+///
+/// Callers pass `"/"` for repo-level reads (listings); content endpoints pass the
+/// specific path so a withheld subtree is denied even on an otherwise-public repo.
+pub(crate) async fn authorize_repo_read(
+    state: &AppState,
+    owner: &str,
+    name: &str,
+    caller: Option<&str>,
+    path: &str,
+) -> Result<(RepoRecord, Vec<VisibilityRule>)> {
+    let record = state
+        .db
+        .get_repo(owner, name)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    // A quarantined mirror (admitted by the iCaptcha propagation gate but not
+    // validated) is hidden from every reader — serve/clone and fork alike — as if
+    // it did not exist, until an operator releases it. Checked before the
+    // visibility gate so its existence is never disclosed.
+    if state.db.is_repo_quarantined(&record.id).await? {
+        return Err(AppError::RepoNotFound(format!("{owner}/{name}")));
+    }
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    if visibility_check(&rules, record.is_public, &record.owner_did, caller, path) == Decision::Deny
+    {
+        return Err(AppError::RepoNotFound(format!("{owner}/{name}")));
+    }
+    Ok((record, rules))
+}
+
+/// Match a presented DID against a stored DID that may be the full `did:key:<id>`
+/// form or the bare `<id>` short form (mirror rows store the bare key). Collapse
+/// representation only within `did:key`; never let a bare id match across methods —
+/// `did:web` / `did:gitlawb` share the base58 space with `did:key`, so a
+/// trailing-segment compare would treat `did:key:X` and `did:gitlawb:X` as equal.
+pub(crate) fn did_matches(a: &str, b: &str) -> bool {
+    if a == b {
+        return true;
+    }
+    fn key_id(d: &str) -> &str {
+        d.strip_prefix("did:key:").unwrap_or(d)
+    }
+    let (ka, kb) = (key_id(a), key_id(b));
+    // After stripping `did:key:`, a value still containing ':' is a non-key full
+    // DID — do not let it match a bare `did:key` id.
+    !ka.contains(':') && !kb.contains(':') && ka == kb
+}
+
+/// 403 unless `caller` is the repo owner. Uses [`did_matches`] so the owner check
+/// and the author check (close policy) share one normalization.
+pub(crate) fn require_repo_owner(record: &RepoRecord, caller: &str) -> Result<()> {
+    if did_matches(caller, &record.owner_did) {
+        Ok(())
+    } else {
+        Err(AppError::Forbidden(
+            "only the repo owner can perform this action".into(),
+        ))
+    }
+}
+
+#[cfg(test)]
+mod did_tests {
+    use super::did_matches;
+
+    #[test]
+    fn full_matches_bare_same_key() {
+        assert!(did_matches("did:key:zABC", "zABC"));
+        assert!(did_matches("zABC", "did:key:zABC"));
+    }
+
+    #[test]
+    fn rejects_cross_method_collision() {
+        assert!(!did_matches("did:key:zABC", "did:gitlawb:zABC"));
+        assert!(!did_matches("did:key:zABC", "did:web:zABC"));
+    }
+
+    #[test]
+    fn exact_match_and_distinct_keys() {
+        assert!(did_matches("did:key:zABC", "did:key:zABC"));
+        assert!(!did_matches("did:key:zABC", "did:key:zXYZ"));
+        assert!(!did_matches("zABC", "zXYZ"));
+    }
+
+    #[test]
+    fn empty_did_matches() {
+        assert!(did_matches("", ""));
+        assert!(did_matches("", "did:key:"));
+    }
+}
+
+/// Drift guard (plan 002 §Gate-type table, Step 5). Every in-scope mutation
+/// handler must contain its expected gate marker in its own body; removing a
+/// gate fails this test. Source-level (no DB), so it runs everywhere. When a new
+/// route is added to an in-scope group, add its row here with a deliberate gate
+/// type — that forced decision is the point.
+///
+/// Markers are gate-SHAPED — a call (`require_repo_owner(`, `did_matches(`) or a
+/// binding/comparison expression (`caller != &record.owner_did`,
+/// `let owner_did = auth.0`) — never a bare identifier that could also appear in
+/// a log line. Full-line comments are stripped before matching, so a marker that
+/// survives only as a comment above a deleted gate does NOT satisfy a row.
+#[cfg(test)]
+mod authz_guard {
+    /// The body of `func` with full-line comments removed. Bounds the slice at the
+    /// next top-level fn item so a marker in a later handler can't leak in,
+    /// tolerating `pub async`, `pub(crate) async`, `async`, `pub`, and bare `fn`
+    /// declarations (the old single-`pub async fn` delimiter over-ran on any other
+    /// form).
+    fn fn_body(src: &str, func: &str) -> String {
+        let needle = format!("fn {func}(");
+        let start = src
+            .find(&needle)
+            .unwrap_or_else(|| panic!("handler `{func}` not found (renamed or removed?)"));
+        let rest = &src[start..];
+        let end = [
+            "\npub async fn ",
+            "\npub(crate) async fn ",
+            "\nasync fn ",
+            "\npub fn ",
+            "\nfn ",
+        ]
+        .iter()
+        .filter_map(|p| rest[1..].find(p).map(|i| i + 1))
+        .min()
+        .unwrap_or(rest.len());
+        rest[..end]
+            .lines()
+            .filter(|l| !l.trim_start().starts_with("//"))
+            .collect::<Vec<_>>()
+            .join("\n")
+    }
+
+    #[test]
+    fn every_in_scope_mutation_has_its_gate() {
+        let pulls = include_str!("pulls.rs");
+        let webhooks = include_str!("webhooks.rs");
+        let labels = include_str!("labels.rs");
+        let issues = include_str!("issues.rs");
+        let bounties = include_str!("bounties.rs");
+        let replicas = include_str!("replicas.rs");
+        let tasks = include_str!("tasks.rs");
+        let stars = include_str!("stars.rs");
+        let protect = include_str!("protect.rs");
+        let visibility = include_str!("visibility.rs");
+        let profiles = include_str!("profiles.rs");
+        let repos = include_str!("repos.rs");
+        let register = include_str!("register.rs");
+        let ipfs = include_str!("ipfs.rs");
+
+        // (source, handler, expected gate marker)
+        let rows: &[(&str, &str, &str)] = &[
+            // Bucket A — owner-gate (require_repo_owner -> 403)
+            (pulls, "merge_pr", "require_repo_owner("),
+            (webhooks, "create_webhook", "require_repo_owner("),
+            (webhooks, "delete_webhook", "require_repo_owner("),
+            (labels, "add_label", "require_repo_owner("),
+            (labels, "remove_label", "require_repo_owner("),
+            // Bucket A' — owner OR author (did_matches against the author)
+            (pulls, "close_pr", "did_matches("),
+            (issues, "close_issue", "did_matches("),
+            // Bucket B — read-gate (authorize_repo_read)
+            (pulls, "create_review", "authorize_repo_read("),
+            (pulls, "create_comment", "authorize_repo_read("),
+            (pulls, "create_pr", "authorize_repo_read("),
+            (issues, "create_issue_comment", "authorize_repo_read("),
+            (issues, "create_issue", "authorize_repo_read("),
+            (bounties, "create_bounty", "authorize_repo_read("),
+            (repos, "fork_repo", "authorize_repo_read("),
+            // get_by_cid resolves each candidate (provenance path + legacy scan) through
+            // the shared `gate_and_serve` (#173 round 2); the gate markers themselves are
+            // asserted below. This row proves the delegation is real — the gate is
+            // actually reached, not dead code.
+            (ipfs, "get_by_cid", "gate_and_serve("),
+            // Bucket C — signer-self: the acting DID is matched/bound to auth.0
+            (tasks, "create_task", "did_matches("),
+            (tasks, "claim_task", "did_matches("),
+            (tasks, "complete_task", "did_matches("),
+            (tasks, "fail_task", "did_matches("),
+            (repos, "create_repo", "let owner_did = auth.0"),
+            (profiles, "set_profile", "let did = auth.0"),
+            (register, "register", "did_matches("),
+            (stars, "star_repo", "caller = &auth.0"),
+            (stars, "unstar_repo", "caller = &auth.0"),
+            // Bucket D — non-owner-by-design, positive per-route marker
+            (bounties, "claim_bounty", "claim_bounty(&id, &auth.0"),
+            (bounties, "submit_bounty", "did_matches("),
+            (bounties, "approve_bounty", "did_matches("),
+            (bounties, "cancel_bounty", "did_matches("),
+            (bounties, "dispute_bounty", "did_matches("),
+            (replicas, "register_replica", "did_matches("),
+            (replicas, "unregister_replica", "replica_did = &auth.0"),
+            // PRE-GATED — already owner-gated, in-scope group; guard the gate itself
+            (protect, "protect_branch", "did_matches("),
+            (protect, "unprotect_branch", "did_matches("),
+            (visibility, "set_visibility", "require_owner("),
+            (visibility, "remove_visibility", "require_owner("),
+            (visibility, "list_visibility", "require_owner("),
+        ];
+
+        // The visibility rows prove require_owner is CALLED; this proves the helper
+        // itself does DID-safe matching, not a raw/trailing-segment compare.
+        assert!(
+            fn_body(visibility, "require_owner").contains("did_matches("),
+            "visibility::require_owner must use did_matches for DID-safe owner matching"
+        );
+
+        // The CID read surface (#173) enforces its gate inside the shared
+        // `gate_and_serve`, which BOTH the provenance path and the legacy scan call, so
+        // the markers must live there (the get_by_cid row above only proves delegation).
+        // The repo's own "/" visibility check (KTD2a — never authorize_repo_read's fuzzy
+        // re-resolve) and the quarantine hard-drop BEFORE visibility (INV-11) are both
+        // load-bearing: removing either re-opens a leak on the provenance path.
+        let gate_body = fn_body(ipfs, "gate_and_serve");
+        assert!(
+            gate_body.contains("visibility_check("),
+            "gate_and_serve must gate the CID read surface via visibility_check (KTD2a)"
+        );
+        assert!(
+            gate_body.contains("if quarantined"),
+            "gate_and_serve must hard-drop a quarantined repo before the visibility gate (INV-11)"
+        );
+
+        for (src, func, marker) in rows {
+            let body = fn_body(src, func);
+            assert!(
+                body.contains(marker),
+                "handler `{func}` is missing its gate marker `{marker}` — gate removed or route reclassified"
+            );
+        }
+    }
+
+    /// Proves the comment-stripping that GUARD-1 added: a marker that appears only
+    /// in a full-line comment (the real `replicas.rs` false-pass shape) must NOT
+    /// satisfy a row.
+    #[test]
+    fn comment_only_marker_does_not_satisfy_a_row() {
+        let src = "pub async fn demo() {\n    // did_matches( handles the owner form\n    do_thing();\n}\n";
+        assert!(
+            !fn_body(src, "demo").contains("did_matches("),
+            "a marker present only in a comment must not count as an enforced gate"
+        );
+    }
+
+    /// All `pub async fn` / `pub(crate) async fn` handler names declared in `src`.
+    /// Verb-agnostic on purpose: a repo-scoped read of any name is in scope, so a
+    /// handler named `fetch_*` / `replicate_*` / `info_refs` cannot escape the gate
+    /// check by not being called `list_*` / `get_*`.
+    fn handler_names(src: &str) -> Vec<String> {
+        ["pub async fn ", "pub(crate) async fn "]
+            .iter()
+            .flat_map(|decl| {
+                src.match_indices(decl).map(move |(i, _)| {
+                    src[i + decl.len()..]
+                        .chars()
+                        .take_while(|c| c.is_alphanumeric() || *c == '_')
+                        .collect::<String>()
+                })
+            })
+            .collect()
+    }
+
+    /// True when the handler's signature takes an owner+repo path
+    /// (`Path<(String, String...)>`), i.e. it is a repo-scoped read rather than a
+    /// node-wide aggregate (`/stats`, `/ipfs/pins`, the global feeds).
+    fn is_repo_scoped(body: &str) -> bool {
+        let header = &body[..body.find('{').unwrap_or(body.len())];
+        header.contains("Path<(String, String")
+    }
+
+    /// True when at least one gate marker runs for EVERY service — i.e. some
+    /// marker sits outside any `if service == ...` discriminator block. A gate
+    /// that appears ONLY inside such a block (as the info/refs advertisement gate
+    /// did before #119: `visibility_check` ran under `if service ==
+    /// "git-upload-pack"`, leaving `git-receive-pack` ungated) covers a subset of
+    /// services and must NOT count as a full gate. Other handlers carry no
+    /// `service ==` discriminator, so for them this matches the plain
+    /// substring check. NOTE: only `if service ==` is detected — a
+    /// `match service { .. }` discriminator is NOT tracked and a gate inside one
+    /// arm would pass as full; avoid that shape, or extend the span loop below.
+    fn gate_runs_unconditionally(body: &str, markers: &[&str]) -> bool {
+        // Brace-matched spans of each `if service == ...` block.
+        let mut cond_spans: Vec<(usize, usize)> = Vec::new();
+        let mut search = 0;
+        while let Some(rel) = body[search..].find("if service ==") {
+            let cond_start = search + rel;
+            let Some(brace_rel) = body[cond_start..].find('{') else {
+                break;
+            };
+            let open = cond_start + brace_rel;
+            let mut depth = 0i32;
+            let mut end = body.len();
+            for (i, c) in body[open..].char_indices() {
+                match c {
+                    '{' => depth += 1,
+                    '}' => {
+                        depth -= 1;
+                        if depth == 0 {
+                            end = open + i;
+                            break;
+                        }
+                    }
+                    _ => {}
+                }
+            }
+            cond_spans.push((open, end));
+            // On an unclosed block `end` stays at body.len() (the fail-safe
+            // direction: treat the rest as conditional rather than mask a gate);
+            // clamp so the next slice can't index past the end and panic.
+            search = (end + 1).min(body.len());
+        }
+        markers.iter().any(|m| {
+            body.match_indices(m)
+                .any(|(pos, _)| !cond_spans.iter().any(|(s, e)| pos >= *s && pos <= *e))
+        })
+    }
+
+    /// Collect `.rs` source files under `dir`. Recursive so the completeness scan
+    /// covers nested API modules (`api/<module>/mod.rs` and deeper), not only the
+    /// immediate `api/*.rs` children.
+    fn collect_rs_files(dir: &std::path::Path) -> Vec<std::path::PathBuf> {
+        let mut out = Vec::new();
+        for entry in std::fs::read_dir(dir).expect("read api dir") {
+            let path = entry.expect("dir entry").path();
+            if path.is_dir() {
+                out.extend(collect_rs_files(&path));
+            } else if path.extension().is_some_and(|e| e == "rs") {
+                out.push(path);
+            }
+        }
+        out
+    }
+
+    /// The `.rs` files under `api_root` (as paths RELATIVE to it) that the
+    /// completeness scan must inspect: everything except the top-level `mod.rs` (the
+    /// guard file itself) and the top-level files already covered by the per-handler
+    /// `sources` loop. A nested `api/<module>/<name>.rs` is a distinct source file
+    /// even when its basename matches a listed top-level file, so it stays in scope.
+    fn unlisted_source_files(
+        api_root: &std::path::Path,
+        listed: &std::collections::HashSet<&str>,
+    ) -> Vec<String> {
+        collect_rs_files(api_root)
+            .iter()
+            .filter_map(|path| {
+                let rel = path
+                    .strip_prefix(api_root)
+                    .ok()?
+                    .to_string_lossy()
+                    .replace('\\', "/");
+                if rel == "mod.rs" || listed.contains(rel.as_str()) {
+                    None
+                } else {
+                    Some(rel)
+                }
+            })
+            .collect()
+    }
+
+    #[test]
+    fn collect_rs_files_recurses_subdirs() {
+        let tmp = tempfile::TempDir::new().unwrap();
+        let root = tmp.path();
+        std::fs::write(root.join("a.rs"), "").unwrap();
+        std::fs::write(root.join("note.txt"), "").unwrap();
+        std::fs::create_dir_all(root.join("sub/deep")).unwrap();
+        std::fs::write(root.join("sub/mod.rs"), "").unwrap();
+        std::fs::write(root.join("sub/deep/c.rs"), "").unwrap();
+        let names: std::collections::HashSet<String> = collect_rs_files(root)
+            .iter()
+            .map(|p| {
+                p.strip_prefix(root)
+                    .unwrap()
+                    .to_string_lossy()
+                    .replace('\\', "/")
+            })
+            .collect();
+        assert!(names.contains("a.rs"));
+        assert!(
+            names.contains("sub/mod.rs"),
+            "nested module file must be collected"
+        );
+        assert!(
+            names.contains("sub/deep/c.rs"),
+            "deeply nested file must be collected"
+        );
+        assert!(
+            !names.iter().any(|n| n.ends_with(".txt")),
+            "non-rs files excluded"
+        );
+        assert_eq!(names.len(), 3);
+    }
+
+    // P3 (#119): the completeness scan must skip already-covered files by their path
+    // RELATIVE to api_root, not by basename. A nested api/<module>/repos.rs is a
+    // distinct source file from the covered top-level repos.rs and must still be
+    // scanned, or a new nested module could smuggle in an ungated repo-scoped handler
+    // behind a colliding filename.
+    #[test]
+    fn unlisted_source_files_scans_nested_file_with_colliding_basename() {
+        let tmp = tempfile::TempDir::new().unwrap();
+        let root = tmp.path();
+        std::fs::write(root.join("repos.rs"), "").unwrap();
+        std::fs::write(root.join("mod.rs"), "").unwrap();
+        std::fs::create_dir_all(root.join("sub")).unwrap();
+        std::fs::write(root.join("sub/repos.rs"), "").unwrap();
+        std::fs::write(root.join("sub/fresh.rs"), "").unwrap();
+        let listed: std::collections::HashSet<&str> = ["repos.rs"].into_iter().collect();
+
+        let unlisted = unlisted_source_files(root, &listed);
+
+        assert!(
+            unlisted.contains(&"sub/repos.rs".to_string()),
+            "a nested file whose basename matches a listed top-level file must still be scanned"
+        );
+        assert!(
+            unlisted.contains(&"sub/fresh.rs".to_string()),
+            "a nested file with a unique name must be scanned"
+        );
+        assert!(
+            !unlisted.contains(&"repos.rs".to_string()),
+            "the listed top-level file is covered by the per-handler loop"
+        );
+        assert!(
+            !unlisted.contains(&"mod.rs".to_string()),
+            "the top-level guard file is skipped"
+        );
+    }
+
+    /// Egress gate guard: every repo-scoped handler (`Path<(String, String..)>`)
+    /// must carry an authz marker — a read gate (`authorize_repo_read` /
+    /// `visibility_check`), or a write gate (`require_repo_owner` / `require_owner`
+    /// / `did_matches` / a `&auth.0` self-binding) — or be listed in KNOWN_UNGATED
+    /// (the tracked, ungated reads). A new ungated handler of ANY verb trips this,
+    /// and a completeness scan over `src/api/` trips it for a whole new module that
+    /// adds a repo-scoped handler without being wired into `sources`. Mutations are
+    /// also checked precisely, per handler, by the mutation guard above; here they
+    /// only need *some* binding so the net stays verb-agnostic.
+    ///
+    /// Scope and limits (this is a source scrape; the runtime route guard covers
+    /// behaviour):
+    /// - It proves a gate is CALLED, not that it runs on the requested path: a
+    ///   content handler gating `"/"` instead of the subtree still passes here.
+    /// - It sees handlers taking the owner+repo tuple `Path<(String, String..)>`; a
+    ///   repo identified by a struct/custom extractor would be missed (the helper
+    ///   unit tests pin these boundaries).
+    /// - KNOWN_UNGATED entries need a real open issue and review; the staleness
+    ///   assert removes one only once its gate lands.
+    #[test]
+    fn every_repo_scoped_handler_is_gated() {
+        let sources: &[(&str, &str)] = &[
+            (include_str!("bounties.rs"), "bounties.rs"),
+            (include_str!("certs.rs"), "certs.rs"),
+            (include_str!("changelog.rs"), "changelog.rs"),
+            (include_str!("encrypted.rs"), "encrypted.rs"),
+            (include_str!("events.rs"), "events.rs"),
+            (include_str!("issues.rs"), "issues.rs"),
+            (include_str!("labels.rs"), "labels.rs"),
+            (include_str!("protect.rs"), "protect.rs"),
+            (include_str!("pulls.rs"), "pulls.rs"),
+            (include_str!("replicas.rs"), "replicas.rs"),
+            (include_str!("repos.rs"), "repos.rs"),
+            (include_str!("stars.rs"), "stars.rs"),
+            (include_str!("visibility.rs"), "visibility.rs"),
+            (include_str!("webhooks.rs"), "webhooks.rs"),
+        ];
+        let listed: std::collections::HashSet<&str> = sources.iter().map(|(_, f)| *f).collect();
+        assert!(!listed.is_empty(), "read-guard `sources` is empty");
+
+        // Completeness: every api/*.rs NOT already in `sources` must declare no
+        // repo-scoped handler, so a brand-new module cannot add an ungated handler
+        // the scrape never looks at. Reads the directory at test time (so the list
+        // cannot silently drift from the filesystem) and only inspects unlisted
+        // files — listed files are covered by the per-handler loop below.
+        let api_dir = concat!(env!("CARGO_MANIFEST_DIR"), "/src/api");
+        for (_, f) in sources {
+            assert!(
+                std::path::Path::new(api_dir).join(f).exists(),
+                "read-guard `sources` lists {f} but the file does not exist"
+            );
+        }
+        let api_root = std::path::Path::new(api_dir);
+        for rel in unlisted_source_files(api_root, &listed) {
+            let src = std::fs::read_to_string(api_root.join(&rel)).expect("read api file");
+            let has_repo_handler = handler_names(&src)
+                .iter()
+                .any(|n| is_repo_scoped(&fn_body(&src, n)));
+            assert!(
+                !has_repo_handler,
+                "api/{rel} declares a repo-scoped handler but is not in the egress \
+                 guard `sources` list — add it so its handlers are gate-checked"
+            );
+        }
+
+        // Repo-scoped reads known to be ungated today, each tracked by an issue.
+        // Remove an entry the moment its gate lands (the staleness assert enforces it).
+        let known_ungated: &[(&str, &str)] = &[
+            ("list_webhooks", "#94 (PR #113)"),
+            ("list_replicas", "PR #113"),
+            ("list_protected_branches", "PR #113"),
+        ];
+        let is_known = |n: &str| known_ungated.iter().any(|(k, _)| *k == n);
+        // Any one of these = the handler binds the caller to an authz decision: the
+        // first two are read gates, the rest are the write/owner/self-binding forms.
+        // A repo-scoped mutation passes here on its write gate; the mutation guard
+        // above additionally verifies the exact gate type per handler. NOTE: a local
+        // rename of `caller`/`replica_did` must be paired with a marker update here.
+        let markers = [
+            "authorize_repo_read(",
+            "visibility_check(",
+            "require_repo_owner(",
+            "require_owner(",
+            "did_matches(",
+            "caller = &auth.0",
+            "replica_did = &auth.0",
+        ];
+
+        // Every KNOWN_UNGATED name must be a real handler (catch typos / renames).
+        let all: std::collections::HashSet<String> =
+            sources.iter().flat_map(|(s, _)| handler_names(s)).collect();
+        for (n, _) in known_ungated {
+            assert!(
+                all.contains(*n),
+                "KNOWN_UNGATED lists `{n}`, which is not a real handler (renamed or removed?)"
+            );
+        }
+
+        let mut checked = 0usize;
+        for (src, file) in sources {
+            for name in handler_names(src) {
+                let body = fn_body(src, &name);
+                if !is_repo_scoped(&body) {
+                    continue; // node-wide aggregate, not a repo-scoped surface
+                }
+                checked += 1;
+                let gated = gate_runs_unconditionally(&body, &markers);
+                assert!(
+                    gated || is_known(&name),
+                    "repo-scoped handler `{name}` ({file}) has no authz gate and is \
+                     not in KNOWN_UNGATED — add the visibility/owner gate with the \
+                     caller, or track it there"
+                );
+                assert!(
+                    !(gated && is_known(&name)),
+                    "handler `{name}` ({file}) is now gated — remove it from \
+                     KNOWN_UNGATED so the allowlist stays an accurate gap list"
+                );
+            }
+        }
+        // Tripwire: if the scrape silently stopped finding handlers (e.g. a parser
+        // regression in handler_names/is_repo_scoped), this floor fails loudly
+        // instead of the guard passing vacuously. Current count is ~54 repo-scoped
+        // handlers; 20 is a deliberate floor that trips only on a gross regression.
+        assert!(
+            checked >= 20,
+            "egress guard only checked {checked} repo-scoped handlers — the scrape likely broke"
+        );
+    }
+
+    /// Pins the `handler_names` boundary: it collects every `pub`/`pub(crate)
+    /// async fn` regardless of verb (so a `fetch_*` read cannot escape), and skips
+    /// private `async fn` and sync `fn` helpers.
+    #[test]
+    fn handler_names_finds_all_pub_async_and_skips_others() {
+        let src = "pub async fn list_things() {}\n\
+                   pub async fn fetch_thing() {}\n\
+                   pub(crate) async fn get_crate_thing() {}\n\
+                   async fn private_helper() {}\n\
+                   fn sync_helper() {}\n";
+        let names = handler_names(src);
+        // Verb-agnostic: a non-list/get read verb is still seen.
+        assert!(names.contains(&"list_things".to_string()));
+        assert!(names.contains(&"fetch_thing".to_string()));
+        // pub(crate) routed handlers are in scope too.
+        assert!(names.contains(&"get_crate_thing".to_string()));
+        // Private/sync helpers are not routed handlers and are skipped.
+        assert!(!names
+            .iter()
+            .any(|n| n == "private_helper" || n == "sync_helper"));
+    }
+
+    /// Pins the `is_repo_scoped` boundary: an owner+repo tuple Path is repo-scoped;
+    /// a single-segment or absent Path is a node-wide aggregate.
+    #[test]
+    fn is_repo_scoped_requires_owner_repo_path() {
+        let repo =
+            "fn get_x(s: State, Path((owner, name)): Path<(String, String)>) {\n  body();\n}";
+        let three = "fn get_y(Path((o, n, id)): Path<(String, String, String)>) {\n  body();\n}";
+        let node_wide = "fn list_z(s: State<AppState>) {\n  body();\n}";
+        let single = "fn get_w(Path(cid): Path<String>) {\n  body();\n}";
+        assert!(is_repo_scoped(repo), "owner+repo tuple is repo-scoped");
+        assert!(is_repo_scoped(three), "owner+repo+id tuple is repo-scoped");
+        assert!(!is_repo_scoped(node_wide), "no Path is node-wide");
+        assert!(
+            !is_repo_scoped(single),
+            "single-segment Path is not repo-scoped"
+        );
+    }
+
+    /// Pins `gate_runs_unconditionally`: a gate nested only inside an
+    /// `if service == ...` block is conditional (does NOT count), while the same
+    /// gate at the top level — or an additional unconditional one — does.
+    #[test]
+    fn conditional_service_gate_is_not_a_full_gate() {
+        let markers = ["visibility_check("];
+        // Gate runs only for one service: not a full gate.
+        let conditional = "fn f() {\n  \
+            if service == \"git-upload-pack\" {\n    \
+                visibility_check(rules, caller);\n  \
+            }\n  \
+            if service == \"git-receive-pack\" { acquire_fresh(); }\n}";
+        assert!(
+            !gate_runs_unconditionally(conditional, &markers),
+            "a gate only inside `if service ==` covers a subset of services"
+        );
+        // Same gate at top level: full gate.
+        let unconditional = "fn f() {\n  \
+            visibility_check(rules, caller);\n  \
+            if service == \"git-receive-pack\" { acquire_fresh(); }\n}";
+        assert!(
+            gate_runs_unconditionally(unconditional, &markers),
+            "an unconditional gate runs for every service"
+        );
+        // A gate inside EACH of two service blocks, none outside: still a
+        // subset (no service clears it unconditionally), so not a full gate.
+        let both_conditional = "fn f() {\n  \
+            if service == \"git-upload-pack\" { visibility_check(a); }\n  \
+            if service == \"git-receive-pack\" { visibility_check(b); }\n}";
+        assert!(
+            !gate_runs_unconditionally(both_conditional, &markers),
+            "a gate inside every service block is still conditional"
+        );
+        // A marker inside one block AND again unconditionally: the
+        // unconditional occurrence makes it a full gate (exercises the
+        // match_indices scan past the in-block hit).
+        let inside_and_outside = "fn f() {\n  \
+            if service == \"git-upload-pack\" { visibility_check(a); }\n  \
+            visibility_check(b);\n}";
+        assert!(
+            gate_runs_unconditionally(inside_and_outside, &markers),
+            "an unconditional occurrence counts even when another is conditional"
+        );
+        // No marker at all: not gated.
+        assert!(!gate_runs_unconditionally(
+            "fn f() { do_thing(); }",
+            &markers
+        ));
+        // An unclosed `if service ==` block (e.g. phantom brace from a string
+        // literal) must not panic on the slice advance; the span runs to EOF, so
+        // the in-block marker reads as conditional. Real Rust source is balanced,
+        // so this only guards the scraper against a future pathological body.
+        let unclosed = "fn f() { if service == \"x\" { visibility_check(a);";
+        assert!(
+            !gate_runs_unconditionally(unclosed, &markers),
+            "an unclosed service block must not panic and stays conditional"
+        );
+    }
+}

crates/gitlawb-node/src/api/peers.rs

@@ -10,11 +10,13 @@
 //!   POST /api/v1/sync/notify           — receive push notification from a peer node
 //!   POST /api/v1/sync/trigger          — manually pull all repos from known peers
 
-use axum::extract::{Path, State};
+use axum::extract::{Extension, Path, State};
 use axum::http::StatusCode;
 use axum::Json;
+use gitlawb_core::did::Did;
 use serde::{Deserialize, Serialize};
 
+use crate::auth::AuthenticatedDid;
 use crate::error::{AppError, Result};
 use crate::state::AppState;
 
@@ -38,6 +40,123 @@ pub struct PeerResponse {
     pub reachable: bool,
 }
 
+/// Extract an IPv4 address embedded in an IPv6 literal across the transition
+/// formats that carry one: IPv4-mapped (`::ffff:a.b.c.d`), IPv4-compatible
+/// (`::a.b.c.d`), 6to4 (`2002:WWXX:YYZZ::/16`), and the NAT64 well-known prefix
+/// (`64:ff9b::/96`). Returns `None` for native IPv6. Callers fold the result
+/// back through the v4 range checks so loopback/private addresses smuggled in
+/// via any of these encodings are rejected, not just the mapped/compatible pair.
+///
+/// INCOMPLETE-NAT64 CONTRACT: non-well-known NAT64 prefixes (e.g. the RFC 8215
+/// local-use `64:ff9b:1::/48`) are deliberately **not** decoded here — their v4
+/// sits at a prefix-length-dependent offset (RFC 6052 §2.2) — so they return
+/// `None`. Any caller that needs them blocked must reject the wider
+/// `64:ff9b::/32` itself; `is_public_http_url` does this in its native-v6 arm.
+fn embedded_ipv4(v6: std::net::Ipv6Addr) -> Option<std::net::Ipv4Addr> {
+    if let Some(v4) = v6.to_ipv4_mapped().or_else(|| v6.to_ipv4()) {
+        return Some(v4);
+    }
+    let s = v6.segments();
+    // 6to4 (2002::/16) embeds W.X.Y.Z in the next two segments.
+    if s[0] == 0x2002 {
+        let [a, b] = s[1].to_be_bytes();
+        let [c, d] = s[2].to_be_bytes();
+        return Some(std::net::Ipv4Addr::new(a, b, c, d));
+    }
+    // NAT64 well-known prefix (64:ff9b::/96) embeds the IPv4 in the low 32 bits.
+    if s[0] == 0x0064 && s[1] == 0xff9b && s[2..6] == [0, 0, 0, 0] {
+        let [a, b] = s[6].to_be_bytes();
+        let [c, d] = s[7].to_be_bytes();
+        return Some(std::net::Ipv4Addr::new(a, b, c, d));
+    }
+    None
+}
+
+/// Whether a peer `http_url` is a public http(s) endpoint safe to register.
+/// Rejects non-http(s) schemes, loopback/unspecified/private/link-local IPs,
+/// and `localhost` / `.local` / `.internal` hostnames. Used at announce time
+/// and by the boot-time prune of already-poisoned rows.
+pub fn is_public_http_url(raw: &str) -> bool {
+    let url = match reqwest::Url::parse(raw) {
+        Ok(u) => u,
+        Err(_) => return false,
+    };
+    if !matches!(url.scheme(), "http" | "https") {
+        return false;
+    }
+    let mut host = match url.host_str() {
+        Some(h) => h.to_ascii_lowercase(),
+        None => return false,
+    };
+    // Drop a single trailing dot (FQDN root): `localhost.` resolves the same as
+    // `localhost`, so normalize before the suffix/equality checks below.
+    if let Some(stripped) = host.strip_suffix('.') {
+        host = stripped.to_string();
+    }
+    if host.is_empty()
+        || host == "localhost"
+        || host.ends_with(".local")
+        || host.ends_with(".internal")
+    {
+        return false;
+    }
+    // host_str() keeps brackets on IPv6 literals (e.g. "[::1]"); strip them
+    // before parsing as an IP.
+    let ip_candidate = host.trim_start_matches('[').trim_end_matches(']');
+    if let Ok(ip) = ip_candidate.parse::<std::net::IpAddr>() {
+        // Reject loopback/unspecified on the literal as given — catches `::1`
+        // and `::` before the IPv4-folding below (`::1`.to_ipv4() would
+        // otherwise map to a non-loopback `0.0.0.1`).
+        if ip.is_loopback() || ip.is_unspecified() {
+            return false;
+        }
+        // Fold any IPv6 literal that embeds an IPv4 address (mapped, compatible,
+        // 6to4, NAT64) down to that IPv4 so the v4 range checks catch
+        // loopback/private addresses smuggled in via an IPv6 encoding, then
+        // re-check loopback/unspecified.
+        let ip = match ip {
+            std::net::IpAddr::V6(v6) => embedded_ipv4(v6).map(std::net::IpAddr::V4).unwrap_or(ip),
+            v4 => v4,
+        };
+        if ip.is_loopback() || ip.is_unspecified() {
+            return false;
+        }
+        match ip {
+            std::net::IpAddr::V4(v4) => {
+                let o = v4.octets();
+                // RFC1918 private, link-local, CGNAT (100.64.0.0/10), or the
+                // RFC1122 "this host" block 0.0.0.0/8 (never a valid destination;
+                // 0.0.0.0 itself is already caught by the is_unspecified check).
+                if v4.is_private()
+                    || v4.is_link_local()
+                    || (o[0] == 100 && (o[1] & 0xc0) == 64)
+                    || o[0] == 0
+                {
+                    return false;
+                }
+            }
+            std::net::IpAddr::V6(v6) => {
+                let s = v6.segments();
+                // fc00::/7 (unique-local) or fe80::/10 (link-local)
+                if (s[0] & 0xfe00) == 0xfc00 || (s[0] & 0xffc0) == 0xfe80 {
+                    return false;
+                }
+                // Any NAT64 address (64:ff9b::/32) that is not the cleanly
+                // decodable well-known /96 — e.g. the RFC 8215 local-use
+                // 64:ff9b:1::/48 — carries a translated target whose embedded v4
+                // sits at a prefix-length-dependent offset (RFC 6052 §2.2).
+                // Rather than risk a wrong decode across every prefix length we
+                // reject the whole NAT64 space here. The well-known /96 was
+                // already folded to its v4 above and never reaches this arm.
+                if s[0] == 0x0064 && s[1] == 0xff9b {
+                    return false;
+                }
+            }
+        }
+    }
+    true
+}
+
 /// GET /api/v1/peers
 pub async fn list_peers(State(state): State<AppState>) -> Result<Json<serde_json::Value>> {
     let peers = state.db.list_peers().await?;
@@ -50,7 +169,9 @@ pub async fn list_peers(State(state): State<AppState>) -> Result<Json<serde_json
             reachable: p.last_ping_ok,
         })
         .collect();
-    Ok(Json(serde_json::json!({ "peers": resp, "count": resp.len() })))
+    Ok(Json(
+        serde_json::json!({ "peers": resp, "count": resp.len() }),
+    ))
 }
 
 /// POST /api/v1/peers/announce (auth required)
@@ -59,11 +180,52 @@ pub async fn list_peers(State(state): State<AppState>) -> Result<Json<serde_json
 /// The Authorization header's DID must match the `did` in the body.
 pub async fn announce(
     State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
     Json(req): Json<AnnounceRequest>,
 ) -> Result<(StatusCode, Json<serde_json::Value>)> {
-    // Validate the URL is HTTP/HTTPS
-    if !req.http_url.starts_with("http://") && !req.http_url.starts_with("https://") {
-        return Err(AppError::BadRequest("http_url must start with http:// or https://".into()));
+    let announced_did: Did = req
+        .did
+        .parse()
+        .map_err(|e: gitlawb_core::Error| AppError::BadRequest(e.to_string()))?;
+    if let Some(Extension(auth)) = auth {
+        if auth.0 != announced_did.to_string() {
+            return Err(AppError::BadRequest(
+                "Signature keyid must match announced DID".into(),
+            ));
+        }
+    } else {
+        tracing::warn!(
+            did = %announced_did,
+            "accepted unsigned peer announce; set GITLAWB_REQUIRE_SIGNED_PEER_WRITES=true after all peers upgrade"
+        );
+    }
+
+    // Validate the URL is a public http(s) endpoint. The announce route is
+    // reachable unauthenticated (until all peers sign), so without this an
+    // attacker can register loopback/private "peers" (localhost:5432, etc.)
+    // and turn our outbound sync-notify fan-out into an SSRF probe — and bury
+    // the real peers under junk so node-origin repos stop replicating.
+    if !is_public_http_url(&req.http_url) {
+        return Err(AppError::BadRequest(
+            "http_url must be a public http(s) URL (no loopback, private, or .internal/.local hosts)".into(),
+        ));
+    }
+
+    // Reject self-announcements: a peer row whose http_url is our own public
+    // URL makes the HTTP-notify path fan out to ourselves. Seen in prod when
+    // misconfigured dev nodes announce with their upstream's URL.
+    // prune_self_peers clears stale rows at boot; this stops new ones.
+    if let Some(self_url) = state.config.public_url.as_deref() {
+        if req.http_url.trim_end_matches('/') == self_url.trim_end_matches('/') {
+            return Err(AppError::BadRequest(
+                "http_url is this node's own public URL; refusing to register self as peer".into(),
+            ));
+        }
+    }
+    if announced_did.to_string() == state.node_did.to_string() {
+        return Err(AppError::BadRequest(
+            "did is this node's own DID; refusing to register self as peer".into(),
+        ));
     }
 
     state.db.upsert_peer(&req.did, &req.http_url).await?;
@@ -71,13 +233,16 @@ pub async fn announce(
     tracing::info!(did = %req.did, url = %req.http_url, "peer announced");
 
     // Return our own info so the peer can add us back
-    Ok((StatusCode::OK, Json(serde_json::json!({
-        "status": "accepted",
-        "node_did": state.node_did.to_string(),
-        "node_url": state.config.public_url.as_deref().unwrap_or(""),
-        "peer_count": state.db.list_peers().await.map(|p| p.len()).unwrap_or(0),
-        "message": "added to peer list",
-    }))))
+    Ok((
+        StatusCode::OK,
+        Json(serde_json::json!({
+            "status": "accepted",
+            "node_did": state.node_did.to_string(),
+            "node_url": state.config.public_url.as_deref().unwrap_or(""),
+            "peer_count": state.db.list_peers().await.map(|p| p.len()).unwrap_or(0),
+            "message": "added to peer list",
+        })),
+    ))
 }
 
 /// POST /api/v1/sync/trigger
@@ -86,9 +251,7 @@ pub async fn announce(
 /// peer's repo list over HTTP and enqueues any repos we don't have or are
 /// behind on into the sync_queue. This is the HTTP fallback when Gossipsub
 /// p2p is not yet connected.
-pub async fn trigger_sync(
-    State(state): State<AppState>,
-) -> Result<Json<serde_json::Value>> {
+pub async fn trigger_sync(State(state): State<AppState>) -> Result<Json<serde_json::Value>> {
     let peers = state.db.list_peers().await?;
     let client = &state.http_client;
     let mut enqueued = 0u32;
@@ -99,39 +262,56 @@ pub async fn trigger_sync(
             continue;
         }
         let url = format!("{}/api/v1/repos", peer.http_url.trim_end_matches('/'));
-        let result = tokio::time::timeout(
-            std::time::Duration::from_secs(5),
-            client.get(&url).send(),
-        ).await;
-
-        let repos: Vec<serde_json::Value> = match result {
-            Ok(Ok(resp)) if resp.status().is_success() => {
-                peers_reached += 1;
-                resp.json().await.unwrap_or_default()
+        // 30s with the body read inside the timeout: 5s only covered the
+        // response headers, so canonical nodes serving large unpaginated repo
+        // lists (and transpacific round trips) aborted mid-body.
+        let result = tokio::time::timeout(std::time::Duration::from_secs(30), async {
+            let resp = client.get(&url).send().await?;
+            if !resp.status().is_success() {
+                return Err(anyhow::anyhow!("peer returned status {}", resp.status()));
             }
-            _ => {
-                tracing::warn!(peer = %peer.did, "trigger_sync: could not reach peer");
+            let repos: Vec<serde_json::Value> = resp.json().await?;
+            Ok::<_, anyhow::Error>(repos)
+        })
+        .await;
+
+        let repos = match result {
+            Ok(Ok(repos)) => {
+                peers_reached += 1;
+                repos
+            }
+            Ok(Err(e)) => {
+                tracing::warn!(peer = %peer.did, err = %e, "trigger_sync: peer fetch failed");
+                continue;
+            }
+            Err(_) => {
+                tracing::warn!(peer = %peer.did, "trigger_sync: peer timed out");
                 continue;
             }
         };
 
         for repo in repos {
-            let repo_slug = match (repo.get("owner_did").and_then(|v| v.as_str()),
-                                   repo.get("name").and_then(|v| v.as_str())) {
+            let repo_slug = match (
+                repo.get("owner_did").and_then(|v| v.as_str()),
+                repo.get("name").and_then(|v| v.as_str()),
+            ) {
                 (Some(owner), Some(name)) => {
-                    // Use short owner (last colon segment) matching DB convention
-                    let short = owner.split(':').last().unwrap_or(owner);
+                    // Use short owner (did:key-only normalization) matching DB convention
+                    let short = crate::db::normalize_owner_key(owner);
                     format!("{short}/{name}")
                 }
                 _ => continue,
             };
-            let _ = state.db.enqueue_sync(
-                &repo_slug,
-                &peer.did,
-                "refs/heads/main",
-                "0000000000000000000000000000000000000000",
-                None,
-            ).await;
+            let _ = state
+                .db
+                .enqueue_sync(
+                    &repo_slug,
+                    &peer.did,
+                    "refs/heads/main",
+                    "0000000000000000000000000000000000000000",
+                    None,
+                )
+                .await;
             enqueued += 1;
         }
     }
@@ -155,12 +335,38 @@ pub struct NotifyRequest {
     pub ref_name: String,
     pub new_sha: String,
     pub node_did: String,
+    // Optional fields — older senders only included the four above. New
+    // senders include these so received_ref_updates has full provenance
+    // even when the libp2p mesh isn't delivering and the HTTP fallback
+    // is the only path that fired.
+    #[serde(default)]
+    pub pusher_did: Option<String>,
+    #[serde(default)]
+    pub old_sha: Option<String>,
+    #[serde(default)]
+    pub timestamp: Option<String>,
+    #[serde(default)]
+    pub cert_id: Option<String>,
 }
 
 pub async fn notify_sync(
     State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
     Json(req): Json<NotifyRequest>,
 ) -> Result<Json<serde_json::Value>> {
+    if let Some(Extension(auth)) = auth {
+        if auth.0 != req.node_did {
+            return Err(AppError::BadRequest(
+                "Signature keyid must match notification node_did".into(),
+            ));
+        }
+    } else {
+        tracing::warn!(
+            did = %req.node_did,
+            "accepted unsigned sync notify; set GITLAWB_REQUIRE_SIGNED_PEER_WRITES=true after all peers upgrade"
+        );
+    }
+
     // Only accept notifications from known peers
     let peers = state.db.list_peers().await?;
     let known = peers.iter().any(|p| p.did == req.node_did);
@@ -171,13 +377,31 @@ pub async fn notify_sync(
         )));
     }
 
-    state.db.enqueue_sync(
-        &req.repo,
-        &req.node_did,
-        &req.ref_name,
-        &req.new_sha,
-        None,
-    ).await?;
+    state
+        .db
+        .enqueue_sync(&req.repo, &req.node_did, &req.ref_name, &req.new_sha, None)
+        .await?;
+
+    // Mirror the gossipsub-receive handler: insert the same record we'd
+    // get from the libp2p path, so /api/v1/events/ref-updates reflects
+    // pushes that arrive over either transport.
+    let now = chrono::Utc::now().to_rfc3339();
+    let update = crate::db::ReceivedRefUpdate {
+        id: uuid::Uuid::new_v4().to_string(),
+        node_did: req.node_did.clone(),
+        pusher_did: req.pusher_did.clone().unwrap_or_default(),
+        repo: req.repo.clone(),
+        ref_name: req.ref_name.clone(),
+        old_sha: req.old_sha.clone().unwrap_or_default(),
+        new_sha: req.new_sha.clone(),
+        timestamp: req.timestamp.clone().unwrap_or_else(|| now.clone()),
+        cert_id: req.cert_id.clone(),
+        received_at: now,
+        from_peer: format!("http:{}", req.node_did),
+    };
+    if let Err(e) = state.db.insert_ref_update(&update).await {
+        tracing::warn!(err = %e, repo = %req.repo, "failed to insert ref-update from sync notify");
+    }
 
     tracing::info!(
         repo = %req.repo,
@@ -201,12 +425,23 @@ pub async fn ping_peer(
     Path(did): Path<String>,
 ) -> Result<Json<serde_json::Value>> {
     let peers = state.db.list_peers().await?;
-    let peer = peers.into_iter().find(|p| p.did == did)
+    let peer = peers
+        .into_iter()
+        .find(|p| p.did == did)
         .ok_or_else(|| AppError::RepoNotFound(format!("peer {did} not found")))?;
 
     // Async ping
     let url = format!("{}/health", peer.http_url.trim_end_matches('/'));
-    let ok = reqwest::get(&url).await.map(|r| r.status().is_success()).unwrap_or(false);
+    // Use the shared no-redirect client: bare `reqwest::get` follows redirects,
+    // so a peer could answer with `302 -> http://127.0.0.1/` and turn the ping
+    // into an SSRF probe.
+    let ok = state
+        .http_client
+        .get(&url)
+        .send()
+        .await
+        .map(|r| r.status().is_success())
+        .unwrap_or(false);
 
     let _ = state.db.mark_peer_ping(&did, ok).await;
 
@@ -216,3 +451,544 @@ pub async fn ping_peer(
         "reachable": ok,
     })))
 }
+
+#[cfg(test)]
+mod tests {
+    use super::is_public_http_url;
+
+    #[test]
+    fn accepts_public_https_and_http() {
+        assert!(is_public_http_url("https://node.gitlawb.com"));
+        assert!(is_public_http_url("https://manila.gitlawb.com/"));
+        assert!(is_public_http_url("http://203.0.113.10:7545"));
+    }
+
+    #[test]
+    fn rejects_loopback_private_and_internal() {
+        for bad in [
+            "http://localhost:7545",
+            "http://127.0.0.1:5432/",
+            "http://localhost:22/",
+            "http://0.0.0.0:7545",
+            // RFC1122 "this host" block 0.0.0.0/8 beyond 0.0.0.0 itself,
+            // including the upper boundary (1.0.0.0 is public, tested below).
+            "http://0.0.0.1:7545",
+            "http://0.1.2.3/",
+            "http://0.255.255.255/",
+            "http://10.0.0.5:7545",
+            "http://192.168.1.10/",
+            "http://172.16.0.1:7545",
+            "http://169.254.1.1/",
+            "http://[::1]:7545",
+            "http://gitlawb-node.internal:7545",
+            "http://my-node.local/",
+            "ftp://node.gitlawb.com",
+            "not-a-url",
+            "",
+            // Trailing-dot FQDN of an internal host.
+            "http://localhost./",
+            // CGNAT (100.64.0.0/10).
+            "http://100.64.0.1:7545",
+            "http://100.127.255.255/",
+            // IPv4-mapped / IPv4-compatible IPv6 smuggling private/loopback v4.
+            "http://[::ffff:127.0.0.1]:7545",
+            "http://[::ffff:10.0.0.1]/",
+            "http://[::ffff:192.168.1.1]:7545",
+            "http://[::127.0.0.1]/",
+            // 6to4 (2002::/16) embedding loopback/private v4.
+            "http://[2002:7f00:1::]:7545",
+            "http://[2002:a00:1::]/",
+            "http://[2002:c0a8:101::]/",
+            // NAT64 well-known prefix (64:ff9b::/96) embedding loopback/private v4.
+            "http://[64:ff9b::7f00:1]/",
+            "http://[64:ff9b::a00:1]:7545",
+            // NAT64 local-use prefix (64:ff9b:1::/48, RFC 8215) — rejected
+            // outright rather than decoded, so the whole NAT64 space is closed.
+            "http://[64:ff9b:1::7f00:1]/",
+            "http://[64:ff9b:1::a00:1]:7545",
+            "http://[64:ff9b:1:a00::]/",
+            // Local-use NAT64 wrapping a *public* v4 (203.0.113.10) is still
+            // rejected: the block is prefix-based, not payload-based.
+            "http://[64:ff9b:1::cb00:710a]/",
+        ] {
+            assert!(!is_public_http_url(bad), "{bad:?} must be rejected");
+        }
+    }
+
+    #[test]
+    fn accepts_6to4_and_nat64_wrapping_public_v4() {
+        // Fold-and-recheck stays consistent with the mapped/compatible handling:
+        // a transition address that wraps a public v4 is allowed, only the
+        // private/loopback-wrapping forms above are rejected. 203.0.113.10.
+        assert!(is_public_http_url("http://[2002:cb00:710a::]/"));
+        assert!(is_public_http_url("http://[64:ff9b::cb00:710a]/"));
+    }
+
+    #[test]
+    fn accepts_public_outside_cgnat_range() {
+        // 100.0.0.0/10 boundary: .63 and .128 are public, only 100.64-127 is CGNAT.
+        assert!(is_public_http_url("http://100.63.255.255:7545"));
+        assert!(is_public_http_url("http://100.128.0.1/"));
+    }
+
+    #[test]
+    fn accepts_first_address_above_this_host_block() {
+        // 1.0.0.0 is the first address above the rejected 0.0.0.0/8 block;
+        // pins the `o[0] == 0` check against an off-by-one into 1.x.
+        assert!(is_public_http_url("http://1.0.0.0/"));
+    }
+
+    // ── #82: /sync/trigger signature gate + per-IP brake on the peer-sync routes ──
+    //
+    // These drive the FULL production router (crate::server::build_router) so the
+    // route wiring, layer order, and config-mode branching are all under test.
+    // The positive-path and DID-agnostic cases mount the handler directly because
+    // signed_request_as injects only an AuthenticatedDid extension (not a real
+    // RFC-9421 signature), which require_signature rejects on the full router.
+    use crate::rate_limit::{IpRateLimiter, RateLimiter, TrustedProxy};
+    use crate::state::AppState;
+    use crate::test_support::{signed_request_as, test_state};
+    use axum::body::Body;
+    use axum::extract::ConnectInfo;
+    use axum::http::{header, Method, Request, StatusCode};
+    use axum::routing::post;
+    use axum::{middleware, Extension, Router};
+    use gitlawb_core::http_sig::sign_request;
+    use gitlawb_core::identity::Keypair;
+    use sqlx::PgPool;
+    use std::net::SocketAddr;
+    use std::sync::Arc;
+    use std::time::Duration;
+    use tower::ServiceExt;
+
+    fn unsigned_post(uri: &str, body: &str, peer: &str) -> Request<Body> {
+        let mut req = Request::builder()
+            .method(Method::POST)
+            .uri(uri)
+            .header(header::CONTENT_TYPE, "application/json")
+            .body(Body::from(body.to_string()))
+            .unwrap();
+        req.extensions_mut()
+            .insert(ConnectInfo(peer.parse::<SocketAddr>().unwrap()));
+        req
+    }
+
+    fn require_signed_peer_writes(state: &mut AppState) {
+        let mut cfg = (*state.config).clone();
+        cfg.require_signed_peer_writes = true;
+        state.config = Arc::new(cfg);
+    }
+
+    const NOTIFY_BODY: &str = r#"{"repo":"demo","ref_name":"refs/heads/main","new_sha":"0000000000000000000000000000000000000000","node_did":"PEER_DID"}"#;
+
+    // ── trigger: mandatory signature ──────────────────────────────────────────
+
+    #[sqlx::test]
+    async fn sync_trigger_rejects_unsigned_in_default_mode(pool: PgPool) {
+        // The hole: with require_signed_peer_writes=false (default), an anonymous
+        // caller reaches the fan-out. Must be 401 regardless of the flag.
+        let state = test_state(pool).await;
+        let router = crate::server::build_router(state);
+        let resp = router
+            .oneshot(unsigned_post(
+                "/api/v1/sync/trigger",
+                "{}",
+                "203.0.113.1:5000",
+            ))
+            .await
+            .unwrap();
+        assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_rejects_unsigned_in_signed_writes_mode(pool: PgPool) {
+        // The signature requirement must not depend on the flag.
+        let mut state = test_state(pool).await;
+        require_signed_peer_writes(&mut state);
+        let router = crate::server::build_router(state);
+        let resp = router
+            .oneshot(unsigned_post(
+                "/api/v1/sync/trigger",
+                "{}",
+                "203.0.113.2:5000",
+            ))
+            .await
+            .unwrap();
+        assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_admits_signed_caller(pool: PgPool) {
+        // must-not-over-throttle: a signed caller reaches the handler and (with no
+        // peers seeded) gets 200, not 429. Direct-mount because a real signature
+        // cannot be forged through the full router in tests.
+        let state = test_state(pool).await;
+        let did = Keypair::generate().did().to_string();
+        let app = Router::new()
+            .route("/api/v1/sync/trigger", post(super::trigger_sync))
+            .layer(middleware::from_fn(crate::rate_limit::rate_limit_by_ip))
+            .layer(Extension(IpRateLimiter {
+                limiter: RateLimiter::new(60, Duration::from_secs(3600)),
+                trust: TrustedProxy::None,
+            }))
+            .with_state(state);
+        let mut req =
+            signed_request_as(&did, Method::POST, "/api/v1/sync/trigger", Body::from("{}"));
+        req.extensions_mut().insert(ConnectInfo(
+            "203.0.113.3:5000".parse::<SocketAddr>().unwrap(),
+        ));
+        let resp = app.oneshot(req).await.unwrap();
+        assert_eq!(resp.status(), StatusCode::OK);
+    }
+
+    // ── trigger: IP brake ─────────────────────────────────────────────────────
+
+    #[sqlx::test]
+    async fn sync_trigger_ip_flood_is_throttled(pool: PgPool) {
+        // The brake is outermost, so an over-limit request 429s before it ever
+        // reaches require_signature — an unsigned request suffices to prove it.
+        let mut state = test_state(pool).await;
+        state.sync_trigger_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let peer = "203.0.113.4:5000";
+        // Exhaust the single-request budget up front.
+        assert!(
+            state
+                .sync_trigger_rate_limiter
+                .check(&peer.parse::<SocketAddr>().unwrap().ip().to_string())
+                .await
+        );
+        let router = crate::server::build_router(state);
+        let resp = router
+            .oneshot(unsigned_post("/api/v1/sync/trigger", "{}", peer))
+            .await
+            .unwrap();
+        assert_eq!(resp.status(), StatusCode::TOO_MANY_REQUESTS);
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_brake_is_did_agnostic(pool: PgPool) {
+        // Why per-IP, not per-DID: a DID farm (fresh did:key per request) does not
+        // bypass an IP-keyed brake. Two DISTINCT DIDs from one IP, brake limit 1 →
+        // the second is 429. A per-DID limiter would give each DID its own bucket.
+        let state = test_state(pool).await;
+        let app = Router::new()
+            .route("/api/v1/sync/trigger", post(super::trigger_sync))
+            .layer(middleware::from_fn(crate::rate_limit::rate_limit_by_ip))
+            .layer(Extension(IpRateLimiter {
+                limiter: RateLimiter::new(1, Duration::from_secs(3600)),
+                trust: TrustedProxy::None,
+            }))
+            .with_state(state);
+        let peer = "203.0.113.5:5000".parse::<SocketAddr>().unwrap();
+        let mk = |did: &str| {
+            let mut r =
+                signed_request_as(did, Method::POST, "/api/v1/sync/trigger", Body::from("{}"));
+            r.extensions_mut().insert(ConnectInfo(peer));
+            r
+        };
+        let first = app
+            .clone()
+            .oneshot(mk(&Keypair::generate().did().to_string()))
+            .await
+            .unwrap();
+        assert_eq!(first.status(), StatusCode::OK);
+        let second = app
+            .oneshot(mk(&Keypair::generate().did().to_string()))
+            .await
+            .unwrap();
+        assert_eq!(second.status(), StatusCode::TOO_MANY_REQUESTS);
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_forged_forwarded_header_cannot_bypass(pool: PgPool) {
+        // TrustedProxy::None keys on the socket peer, so rotating X-Forwarded-For
+        // from one socket peer does not refill the bucket. limit 1: first request
+        // consumes it (then 401 unsigned), second from the same socket → 429
+        // regardless of a different XFF value.
+        let mut state = test_state(pool).await;
+        state.sync_trigger_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let router = crate::server::build_router(state);
+        let mut a = unsigned_post("/api/v1/sync/trigger", "{}", "203.0.113.6:5000");
+        a.headers_mut()
+            .insert("x-forwarded-for", "1.1.1.1".parse().unwrap());
+        assert_eq!(
+            router.clone().oneshot(a).await.unwrap().status(),
+            StatusCode::UNAUTHORIZED
+        );
+        let mut b = unsigned_post("/api/v1/sync/trigger", "{}", "203.0.113.6:5000");
+        b.headers_mut()
+            .insert("x-forwarded-for", "2.2.2.2".parse().unwrap());
+        assert_eq!(
+            router.oneshot(b).await.unwrap().status(),
+            StatusCode::TOO_MANY_REQUESTS
+        );
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_rate_limit_zero_disables_but_signature_holds(pool: PgPool) {
+        // 0 disables the brake (RateLimiter::check early-returns), proving the two
+        // halves are independent: no 429 even under a flood, but the signature gate
+        // still 401s every unsigned request.
+        let mut state = test_state(pool).await;
+        state.sync_trigger_rate_limiter = RateLimiter::new(0, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let router = crate::server::build_router(state);
+        for _ in 0..3 {
+            let resp = router
+                .clone()
+                .oneshot(unsigned_post(
+                    "/api/v1/sync/trigger",
+                    "{}",
+                    "203.0.113.7:5000",
+                ))
+                .await
+                .unwrap();
+            assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+        }
+    }
+
+    // ── notify: braked, but signature behavior unchanged ──────────────────────
+
+    async fn seed_peer(state: &AppState) -> String {
+        let did = Keypair::generate().did().to_string();
+        state
+            .db
+            .upsert_peer(&did, "https://peer.example.com")
+            .await
+            .unwrap();
+        did
+    }
+
+    #[sqlx::test]
+    async fn sync_notify_unsigned_flood_is_throttled(pool: PgPool) {
+        // notify still accepts an unsigned known-peer notification (rolling-upgrade
+        // compat), but a flood from one IP is now braked. brake limit 1: first
+        // enqueues (200), second from the same IP → 429.
+        let mut state = test_state(pool).await;
+        state.peer_write_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let peer_did = seed_peer(&state).await;
+        let body = NOTIFY_BODY.replace("PEER_DID", &peer_did);
+        let router = crate::server::build_router(state);
+        let first = router
+            .clone()
+            .oneshot(unsigned_post(
+                "/api/v1/sync/notify",
+                &body,
+                "203.0.113.8:5000",
+            ))
+            .await
+            .unwrap();
+        assert_eq!(first.status(), StatusCode::OK);
+        let second = router
+            .oneshot(unsigned_post(
+                "/api/v1/sync/notify",
+                &body,
+                "203.0.113.8:5000",
+            ))
+            .await
+            .unwrap();
+        assert_eq!(second.status(), StatusCode::TOO_MANY_REQUESTS);
+    }
+
+    #[sqlx::test]
+    async fn sync_notify_distinct_ips_are_not_collaterally_throttled(pool: PgPool) {
+        // must-not-over-throttle: per-IP keying means one peer's volume does not
+        // throttle another. brake limit 1, two DIFFERENT source IPs → both 200.
+        let mut state = test_state(pool).await;
+        state.peer_write_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let peer_did = seed_peer(&state).await;
+        let body = NOTIFY_BODY.replace("PEER_DID", &peer_did);
+        let router = crate::server::build_router(state);
+        for ip in ["203.0.113.20:5000", "203.0.113.21:5000"] {
+            let resp = router
+                .clone()
+                .oneshot(unsigned_post("/api/v1/sync/notify", &body, ip))
+                .await
+                .unwrap();
+            assert_eq!(
+                resp.status(),
+                StatusCode::OK,
+                "distinct IP {ip} must not be throttled"
+            );
+        }
+    }
+
+    #[sqlx::test]
+    async fn notify_flood_does_not_exhaust_trigger_bucket(pool: PgPool) {
+        // Separate buckets: draining peer_write via an unsigned notify flood must
+        // NOT throttle the signed trigger caller from the same IP. After the notify
+        // bucket is spent, an unsigned trigger from that IP hits its own (unspent)
+        // bucket and is rejected by the SIGNATURE gate (401), not the brake (429).
+        let mut state = test_state(pool).await;
+        state.peer_write_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.sync_trigger_rate_limiter = RateLimiter::new(60, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let peer_did = seed_peer(&state).await;
+        let body = NOTIFY_BODY.replace("PEER_DID", &peer_did);
+        let router = crate::server::build_router(state);
+        let ip = "203.0.113.9:5000";
+        assert_eq!(
+            router
+                .clone()
+                .oneshot(unsigned_post("/api/v1/sync/notify", &body, ip))
+                .await
+                .unwrap()
+                .status(),
+            StatusCode::OK
+        );
+        assert_eq!(
+            router
+                .clone()
+                .oneshot(unsigned_post("/api/v1/sync/notify", &body, ip))
+                .await
+                .unwrap()
+                .status(),
+            StatusCode::TOO_MANY_REQUESTS,
+            "peer_write bucket should now be exhausted for this IP"
+        );
+        let trigger = router
+            .oneshot(unsigned_post("/api/v1/sync/trigger", "{}", ip))
+            .await
+            .unwrap();
+        assert_eq!(
+            trigger.status(),
+            StatusCode::UNAUTHORIZED,
+            "trigger must hit its own bucket (401 from the sig gate), not the drained peer_write bucket (429)"
+        );
+    }
+
+    #[sqlx::test]
+    async fn announce_still_accepts_unsigned_in_default_mode(pool: PgPool) {
+        // must-not-over-reach: adding the brake must not tighten announce's
+        // rolling-upgrade behavior — an unsigned announce with a public URL still
+        // succeeds (it only gains the brake, which a single request is under).
+        let state = test_state(pool).await;
+        let did = Keypair::generate().did().to_string();
+        let body = format!(r#"{{"did":"{did}","http_url":"https://peer.example.com"}}"#);
+        let router = crate::server::build_router(state);
+        let resp = router
+            .oneshot(unsigned_post(
+                "/api/v1/peers/announce",
+                &body,
+                "203.0.113.10:5000",
+            ))
+            .await
+            .unwrap();
+        assert_eq!(resp.status(), StatusCode::OK);
+    }
+
+    // Build a request carrying a REAL RFC 9421 signature (not just an injected
+    // extension), so it passes require_signature on the full production router.
+    fn real_signed_trigger(peer: &str) -> Request<Body> {
+        let kp = Keypair::generate();
+        let body = b"{}";
+        let s = sign_request(&kp, "POST", "/api/v1/sync/trigger", body);
+        let mut req = Request::builder()
+            .method(Method::POST)
+            .uri("/api/v1/sync/trigger")
+            .header(header::CONTENT_TYPE, "application/json")
+            .header("content-digest", s.content_digest)
+            .header("signature-input", s.signature_input)
+            .header("signature", s.signature)
+            .body(Body::from(body.to_vec()))
+            .unwrap();
+        req.extensions_mut()
+            .insert(ConnectInfo(peer.parse::<SocketAddr>().unwrap()));
+        req
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_admits_real_signature_through_full_router(pool: PgPool) {
+        // The positive path through the REAL gate: a validly-signed trigger passes
+        // require_signature on the full router and reaches the handler (no peers
+        // seeded → 200), in BOTH config modes.
+        let state = test_state(pool.clone()).await;
+        let resp = crate::server::build_router(state)
+            .oneshot(real_signed_trigger("203.0.113.30:5000"))
+            .await
+            .unwrap();
+        assert_eq!(
+            resp.status(),
+            StatusCode::OK,
+            "a real signature must reach the handler (default mode)"
+        );
+
+        let mut state = test_state(pool).await;
+        require_signed_peer_writes(&mut state);
+        let resp = crate::server::build_router(state)
+            .oneshot(real_signed_trigger("203.0.113.30:5001"))
+            .await
+            .unwrap();
+        assert_eq!(
+            resp.status(),
+            StatusCode::OK,
+            "a real signature must reach the handler (signed-writes mode)"
+        );
+    }
+
+    #[sqlx::test]
+    async fn announce_flood_is_throttled(pool: PgPool) {
+        // The peer_write brake covers /peers/announce too (co-benefit): limit 1,
+        // first unsigned announce from an IP is 200, the second from that IP 429.
+        let mut state = test_state(pool).await;
+        state.peer_write_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let did = Keypair::generate().did().to_string();
+        let body = format!(r#"{{"did":"{did}","http_url":"https://peer.example.com"}}"#);
+        let router = crate::server::build_router(state);
+        let ip = "203.0.113.31:5000";
+        assert_eq!(
+            router
+                .clone()
+                .oneshot(unsigned_post("/api/v1/peers/announce", &body, ip))
+                .await
+                .unwrap()
+                .status(),
+            StatusCode::OK
+        );
+        assert_eq!(
+            router
+                .oneshot(unsigned_post("/api/v1/peers/announce", &body, ip))
+                .await
+                .unwrap()
+                .status(),
+            StatusCode::TOO_MANY_REQUESTS,
+            "announce must be braked by the peer_write limiter"
+        );
+    }
+
+    #[sqlx::test]
+    async fn sync_trigger_429_body_is_generic_not_push(pool: PgPool) {
+        // The shared 429 middleware now serves the sync routes, so its body must
+        // not claim "push" (RED before the message was genericized).
+        let mut state = test_state(pool).await;
+        state.sync_trigger_rate_limiter = RateLimiter::new(1, Duration::from_secs(3600));
+        state.push_limiter_trust = TrustedProxy::None;
+        let peer = "203.0.113.32:5000";
+        assert!(
+            state
+                .sync_trigger_rate_limiter
+                .check(&peer.parse::<SocketAddr>().unwrap().ip().to_string())
+                .await
+        );
+        let router = crate::server::build_router(state);
+        let resp = router
+            .oneshot(unsigned_post("/api/v1/sync/trigger", "{}", peer))
+            .await
+            .unwrap();
+        assert_eq!(resp.status(), StatusCode::TOO_MANY_REQUESTS);
+        let bytes = axum::body::to_bytes(resp.into_body(), usize::MAX)
+            .await
+            .unwrap();
+        let s = String::from_utf8_lossy(&bytes);
+        assert!(s.contains("rate limit exceeded"), "429 body: {s:?}");
+        assert!(
+            !s.contains("push"),
+            "a 429 on a sync route must not say 'push': {s:?}"
+        );
+    }
+}

crates/gitlawb-node/src/api/profiles.rs

@@ -0,0 +1,171 @@
+//! Agent profile API handlers.
+//!
+//! - `PUT /api/v1/profile` — upsert the caller's profile (requires HTTP Signature)
+//! - `GET /api/v1/agents/{did}/profile` — read any agent's profile (public)
+
+use axum::{
+    extract::{Path, State},
+    http::StatusCode,
+    Json,
+};
+use serde::{Deserialize, Serialize};
+use serde_json::{json, Value};
+
+use crate::auth::AuthenticatedDid;
+use crate::pinata;
+use crate::state::AppState;
+
+#[derive(Debug, Deserialize)]
+pub struct SetProfileRequest {
+    pub display_name: Option<String>,
+    pub bio: Option<String>,
+    pub avatar_url: Option<String>,
+    pub website: Option<String>,
+    pub socials: Option<SocialsInput>,
+    pub pin_to_ipfs: Option<bool>,
+}
+
+#[derive(Debug, Deserialize, Serialize)]
+pub struct SocialsInput {
+    pub twitter: Option<String>,
+    pub github: Option<String>,
+    pub farcaster: Option<String>,
+    pub telegram: Option<String>,
+}
+
+pub async fn set_profile(
+    State(state): State<AppState>,
+    axum::Extension(auth): axum::Extension<AuthenticatedDid>,
+    Json(req): Json<SetProfileRequest>,
+) -> Result<(StatusCode, Json<Value>), (StatusCode, Json<Value>)> {
+    let did = auth.0;
+
+    if let Some(ref bio) = req.bio {
+        if bio.len() > 280 {
+            return Err((
+                StatusCode::BAD_REQUEST,
+                Json(json!({ "message": "bio must be 280 characters or fewer" })),
+            ));
+        }
+    }
+
+    if let Some(ref name) = req.display_name {
+        if name.len() > 50 {
+            return Err((
+                StatusCode::BAD_REQUEST,
+                Json(json!({ "message": "display_name must be 50 characters or fewer" })),
+            ));
+        }
+    }
+
+    let socials_json = req
+        .socials
+        .as_ref()
+        .map(|s| serde_json::to_string(s).unwrap_or_else(|_| "{}".to_string()));
+
+    let result = state
+        .db
+        .upsert_profile(
+            &did,
+            req.display_name.as_deref(),
+            req.bio.as_deref(),
+            req.avatar_url.as_deref(),
+            req.website.as_deref(),
+            socials_json.as_deref(),
+        )
+        .await;
+
+    match result {
+        Ok(profile) => {
+            let mut resp = json!({
+                "did": profile.did,
+                "display_name": profile.display_name,
+                "bio": profile.bio,
+                "avatar_url": profile.avatar_url,
+                "website": profile.website,
+                "updated_at": profile.updated_at,
+            });
+
+            if let Some(ref socials_str) = profile.socials {
+                if let Ok(socials) = serde_json::from_str::<Value>(socials_str) {
+                    resp["socials"] = socials;
+                }
+            }
+
+            if req.pin_to_ipfs.unwrap_or(false) && !state.config.pinata_jwt.is_empty() {
+                let profile_json = serde_json::to_vec(&resp).unwrap_or_default();
+                match pinata::pin_object(
+                    &state.http_client,
+                    &state.config.pinata_upload_url,
+                    &state.config.pinata_jwt,
+                    &format!("profile-{}", did),
+                    &profile_json,
+                )
+                .await
+                {
+                    Ok(cid) if !cid.is_empty() => {
+                        if let Err(e) = state.db.set_profile_cid(&did, &cid).await {
+                            tracing::warn!(did = %did, err = %e, "failed to store profile CID");
+                        }
+                        resp["profile_cid"] = json!(cid);
+                    }
+                    Ok(_) => {}
+                    Err(e) => {
+                        tracing::warn!(did = %did, err = %e, "IPFS pin failed — profile saved without CID");
+                    }
+                }
+            } else if let Some(cid) = profile.profile_cid {
+                resp["profile_cid"] = json!(cid);
+            }
+
+            Ok((StatusCode::OK, Json(resp)))
+        }
+        Err(e) => {
+            tracing::error!(did = %did, error = %e, "failed to upsert profile");
+            Err((
+                StatusCode::INTERNAL_SERVER_ERROR,
+                Json(json!({ "message": "failed to save profile" })),
+            ))
+        }
+    }
+}
+
+pub async fn get_profile(
+    State(state): State<AppState>,
+    Path(did): Path<String>,
+) -> Result<Json<Value>, (StatusCode, Json<Value>)> {
+    let profile = state.db.get_profile(&did).await.map_err(|e| {
+        tracing::error!(did = %did, error = %e, "failed to fetch profile");
+        (
+            StatusCode::INTERNAL_SERVER_ERROR,
+            Json(json!({ "message": "failed to fetch profile" })),
+        )
+    })?;
+
+    match profile {
+        Some(p) => {
+            let mut resp = json!({
+                "did": p.did,
+                "display_name": p.display_name,
+                "bio": p.bio,
+                "avatar_url": p.avatar_url,
+                "website": p.website,
+                "profile_cid": p.profile_cid,
+                "created_at": p.created_at,
+                "updated_at": p.updated_at,
+            });
+
+            if let Some(ref socials_str) = p.socials {
+                if let Ok(socials) = serde_json::from_str::<Value>(socials_str) {
+                    resp["socials"] = socials;
+                }
+            }
+
+            Ok(Json(resp))
+        }
+        None => Err((
+            StatusCode::NOT_FOUND,
+            Json(json!({ "message": "profile not found" })),
+        )),
+    }
+}

crates/gitlawb-node/src/api/protect.rs

@@ -17,14 +17,16 @@ pub async fn protect_branch(
     Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, repo, branch)): Path<(String, String, String)>,
 ) -> Result<(StatusCode, Json<serde_json::Value>)> {
-    let record = state.db.get_repo(&owner, &repo).await?
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
 
-    // Only the repo owner can protect branches
+    // Only the repo owner can protect branches (DID-safe match, shared idiom).
     let caller = &auth.0;
-    let owner_short = record.owner_did.split(':').next_back().unwrap_or(&record.owner_did);
-    if caller != &record.owner_did && caller != owner_short {
-        return Err(AppError::BadRequest(
+    if !crate::api::did_matches(caller, &record.owner_did) {
+        return Err(AppError::Forbidden(
             "only the repo owner can protect branches".into(),
         ));
     }
@@ -33,11 +35,14 @@ pub async fn protect_branch(
 
     tracing::info!(repo = %repo, branch = %branch, caller = %caller, "branch protected");
 
-    Ok((StatusCode::CREATED, Json(serde_json::json!({
-        "status": "protected",
-        "repo": format!("{owner}/{repo}"),
-        "branch": branch,
-    }))))
+    Ok((
+        StatusCode::CREATED,
+        Json(serde_json::json!({
+            "status": "protected",
+            "repo": format!("{owner}/{repo}"),
+            "branch": branch,
+        })),
+    ))
 }
 
 /// DELETE /api/v1/repos/:owner/:repo/branches/:branch/protect
@@ -46,13 +51,15 @@ pub async fn unprotect_branch(
     Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, repo, branch)): Path<(String, String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
 
     let caller = &auth.0;
-    let owner_short = record.owner_did.split(':').next_back().unwrap_or(&record.owner_did);
-    if caller != &record.owner_did && caller != owner_short {
-        return Err(AppError::BadRequest(
+    if !crate::api::did_matches(caller, &record.owner_did) {
+        return Err(AppError::Forbidden(
             "only the repo owner can unprotect branches".into(),
         ));
     }
@@ -73,7 +80,10 @@ pub async fn list_protected_branches(
     State(state): State<AppState>,
     Path((owner, repo)): Path<(String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
 
     let branches = state.db.list_protected_branches(&record.id).await?;

crates/gitlawb-node/src/api/pulls.rs

@@ -8,7 +8,7 @@ use serde::Deserialize;
 use uuid::Uuid;
 
 use crate::auth::AuthenticatedDid;
-use crate::db::{PullRequest, PrComment, PrReview};
+use crate::db::{PrComment, PrReview, PullRequest};
 use crate::error::{AppError, Result};
 use crate::git::store;
 use crate::state::AppState;
@@ -40,11 +40,16 @@ pub async fn create_pr(
     Path((owner, name)): Path<(String, String)>,
     Json(req): Json<CreatePrRequest>,
 ) -> Result<(StatusCode, Json<PullRequest>)> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    // Authorize the caller as a reader before accepting a PR: a non-reader must
+    // not be able to open a PR (and fire its webhooks) against a private repo
+    // they cannot read. Mirrors create_review / create_comment / create_bounty.
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, Some(auth.0.as_str()), "/").await?;
 
     let author_did = auth.0;
-    let target_branch = req.target_branch.unwrap_or_else(|| record.default_branch.clone());
+    let target_branch = req
+        .target_branch
+        .unwrap_or_else(|| record.default_branch.clone());
     let number = state.db.next_pr_number(&record.id).await?;
     let now = Utc::now().to_rfc3339();
 
@@ -68,7 +73,11 @@ pub async fn create_pr(
 
     // Bump trust score for the PR author — increment current score by 0.05
     // (avoids the push_count=0 stuck-at-0.05 bug for agents who only open PRs)
-    let current = state.db.get_trust_score(&pr.author_did).await.unwrap_or(0.05);
+    let current = state
+        .db
+        .get_trust_score(&pr.author_did)
+        .await
+        .unwrap_or(0.05);
     let new_score = (current + 0.05).min(1.0);
     let _ = state.db.update_trust_score(&pr.author_did, new_score).await;
 
@@ -92,23 +101,32 @@ pub async fn create_pr(
 pub async fn list_prs(
     State(state): State<AppState>,
     Path((owner, name)): Path<(String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
     let prs = state.db.list_prs(&record.id).await?;
-    Ok(Json(serde_json::json!({ "pulls": prs, "count": prs.len() })))
+    Ok(Json(
+        serde_json::json!({ "pulls": prs, "count": prs.len() }),
+    ))
 }
 
 /// GET /api/v1/repos/:owner/:repo/pulls/:number
 pub async fn get_pr(
     State(state): State<AppState>,
     Path((owner, name, number)): Path<(String, String, i64)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<PullRequest>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     Ok(Json(pr))
@@ -118,15 +136,42 @@ pub async fn get_pr(
 pub async fn get_pr_diff(
     State(state): State<AppState>,
     Path((owner, name, number)): Path<(String, String, i64)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
-    let disk_path = state.repo_store.acquire(&record.owner_did, &record.name).await
+    let disk_path = state
+        .repo_store
+        .acquire(&record.owner_did, &record.name)
+        .await
         .map_err(|e| AppError::Git(e.to_string()))?;
+
+    // Withhold the entire diff if it touches a path the caller cannot read, so a
+    // PR diff cannot leak private-subtree content of an otherwise-public repo.
+    let touched = store::branch_diff_names(&disk_path, &pr.target_branch, &pr.source_branch)
+        .map_err(|e| AppError::Git(e.to_string()))?;
+    for p in &touched {
+        let gate = format!("/{}", p.trim_start_matches('/'));
+        if crate::visibility::visibility_check(
+            &rules,
+            record.is_public,
+            &record.owner_did,
+            caller,
+            &gate,
+        ) == crate::visibility::Decision::Deny
+        {
+            return Err(AppError::NotFound(format!("PR #{number} not found")));
+        }
+    }
+
     let diff = store::branch_diff(&disk_path, &pr.target_branch, &pr.source_branch)
         .map_err(|e| AppError::Git(e.to_string()))?;
 
@@ -143,24 +188,47 @@ pub async fn merge_pr(
     Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, name, number)): Path<(String, String, i64)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    // Owner-only merge (N7). Merging writes the served tree, so this is the same
+    // trust boundary as owner-only push; it subsumes branch protection (a
+    // non-owner cannot merge to any branch, protected or not).
+    crate::api::require_repo_owner(&record, &auth.0)?;
+
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     if pr.status != "open" {
         return Err(AppError::BadRequest(format!("PR is already {}", pr.status)));
     }
 
-    let guard = state.repo_store.acquire_write(&record.owner_did, &record.name).await
-        .map_err(|e| AppError::Git(e.to_string()))?;
+    // Shed 503 + Retry-After on an exhausted write-lock POOL instead of a generic
+    // git 500 (#173 F1). Merging holds no admission permit, so it reaches the pool
+    // unthrottled; reuse the push handler's mapping so the two cannot drift.
+    let guard = state
+        .repo_store
+        .acquire_write(&record.owner_did, &record.name)
+        .await
+        .map_err(|e| crate::api::repos::acquire_write_app_error(&e, &name))?;
     let disk_path = guard.path().to_path_buf();
     let merger_did = auth.0;
-    let merge_result = store::merge_branch(&disk_path, &pr.target_branch, &pr.source_branch, &merger_did, &pr.title);
+    let merge_result = store::merge_branch(
+        &disk_path,
+        &pr.target_branch,
+        &pr.source_branch,
+        &merger_did,
+        &pr.title,
+    );
 
-    // Always release the advisory lock — even on error
-    guard.release().await;
+    // Always release the advisory lock — even on error; upload to Tigris only on success.
+    guard.release(merge_result.is_ok()).await;
 
     let merge_sha = merge_result.map_err(|e| AppError::Git(e.to_string()))?;
 
@@ -192,14 +260,30 @@ pub async fn merge_pr(
 /// POST /api/v1/repos/:owner/:repo/pulls/:number/close
 pub async fn close_pr(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, name, number)): Path<(String, String, i64)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
+    // Owner OR author may close (forge norm).
+    let is_owner = crate::api::require_repo_owner(&record, &auth.0).is_ok();
+    let is_author = crate::api::did_matches(&auth.0, &pr.author_did);
+    if !is_owner && !is_author {
+        return Err(AppError::Forbidden(
+            "only the repo owner or the PR author can close this PR".into(),
+        ));
+    }
+
     state.db.close_pr(&pr.id).await?;
 
     webhooks::fire_event(
@@ -224,15 +308,21 @@ pub async fn create_review(
     Path((owner, name, number)): Path<(String, String, i64)>,
     Json(req): Json<CreateReviewRequest>,
 ) -> Result<(StatusCode, Json<PrReview>)> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    // Read-gate: a reviewer must be able to read the repo, but need not own it.
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, Some(auth.0.as_str()), "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     let valid_statuses = ["approved", "changes_requested", "comment"];
     if !valid_statuses.contains(&req.status.as_str()) {
-        return Err(AppError::BadRequest("status must be approved, changes_requested, or comment".into()));
+        return Err(AppError::BadRequest(
+            "status must be approved, changes_requested, or comment".into(),
+        ));
     }
 
     let review = PrReview {
@@ -266,11 +356,16 @@ pub async fn create_review(
 pub async fn list_reviews(
     State(state): State<AppState>,
     Path((owner, name, number)): Path<(String, String, i64)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     let reviews = state.db.list_pr_reviews(&pr.id).await?;
@@ -285,13 +380,19 @@ pub async fn create_comment(
     Json(req): Json<CreateCommentRequest>,
 ) -> Result<(StatusCode, Json<PrComment>)> {
     if req.body.trim().is_empty() {
-        return Err(AppError::BadRequest("comment body must not be empty".into()));
+        return Err(AppError::BadRequest(
+            "comment body must not be empty".into(),
+        ));
     }
 
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    // Read-gate: a commenter must be able to read the repo, but need not own it.
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, Some(auth.0.as_str()), "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     let comment = PrComment {
@@ -311,13 +412,131 @@ pub async fn create_comment(
 pub async fn list_comments(
     State(state): State<AppState>,
     Path((owner, name, number)): Path<(String, String, i64)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &name, caller, "/").await?;
 
-    let pr = state.db.get_pr(&record.id, number).await?
+    let pr = state
+        .db
+        .get_pr(&record.id, number)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("PR #{number} not found")))?;
 
     let comments = state.db.list_pr_comments(&pr.id).await?;
     Ok(Json(serde_json::json!({ "comments": comments })))
 }
+
+/// #173 F1 follow-up: `merge_pr` reaches `acquire_write` holding NO admission permit
+/// (unlike the push handler, which is capped by the git-push semaphore), so it is one
+/// of the callers most likely to meet an exhausted write-lock POOL under load. An
+/// exhausted pool is a capacity signal, so the merge must shed 503 + Retry-After
+/// (`AppError::Overloaded`) the way the push handler does, not report the generic
+/// 500 git error that says nothing about retrying.
+#[cfg(test)]
+mod lock_pool_shed_tests {
+    use super::*;
+    use axum::response::IntoResponse;
+    use sqlx::PgPool;
+
+    fn seed_repo(owner_did: &str, name: &str) -> crate::db::RepoRecord {
+        let now = Utc::now();
+        crate::db::RepoRecord {
+            id: Uuid::new_v4().to_string(),
+            name: name.to_string(),
+            owner_did: owner_did.to_string(),
+            description: None,
+            is_public: true,
+            default_branch: "main".to_string(),
+            created_at: now,
+            updated_at: now,
+            disk_path: format!("/tmp/{name}"),
+            forked_from: None,
+            machine_id: None,
+        }
+    }
+
+    /// RED-before/GREEN-after for `merge_pr`. Both directions: the shed while the only
+    /// lock-pool connection is held by a guard on a DIFFERENT repo (so this is pool
+    /// capacity, not advisory-lock contention on this repo), and the must-not case
+    /// once that connection is back.
+    #[sqlx::test]
+    async fn merge_pr_lock_pool_exhaustion_sheds_503_not_500(pool: PgPool) {
+        let owner = "did:key:zMERGELOCKPOOLOWNERAAAAAAAAAAAAAAAAAAAAA";
+        let mut state = crate::test_support::test_state(pool.clone()).await;
+        // One lock-pool connection with a short checkout timeout, so a single held
+        // guard exhausts it promptly rather than at the pool default.
+        state.repo_store = crate::git::repo_store::RepoStore::new(
+            std::path::PathBuf::from("/tmp/gitlawb-pulls-lockpool"),
+            None,
+            crate::git::repo_store::build_lock_pool(&pool, 1, std::time::Duration::from_secs(1)),
+        );
+
+        let repo = seed_repo(owner, "lp-merge");
+        let repo_id = repo.id.clone();
+        state.db.create_repo(&repo).await.expect("seed repo");
+        let now = Utc::now().to_rfc3339();
+        state
+            .db
+            .create_pr(&PullRequest {
+                id: Uuid::new_v4().to_string(),
+                repo_id: repo_id.clone(),
+                number: 1,
+                title: "lp".to_string(),
+                body: None,
+                author_did: owner.to_string(),
+                source_branch: "feature".to_string(),
+                target_branch: "main".to_string(),
+                status: "open".to_string(),
+                merged_by_did: None,
+                merged_at: None,
+                created_at: now.clone(),
+                updated_at: now,
+            })
+            .await
+            .expect("seed open PR");
+
+        let held = state
+            .repo_store
+            .acquire_write(owner, "other-repo")
+            .await
+            .expect("the first write takes the only lock-pool connection");
+
+        let shed = merge_pr(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((owner.to_string(), "lp-merge".to_string(), 1)),
+        )
+        .await;
+        let err = shed.expect_err("an exhausted lock pool must fail the call");
+        let resp = err.into_response();
+        assert_eq!(
+            resp.status(),
+            StatusCode::SERVICE_UNAVAILABLE,
+            "merge_pr: an exhausted write-lock pool must shed 503, not a 500 git error"
+        );
+        assert_eq!(
+            resp.headers()
+                .get("retry-after")
+                .map(|v| v.to_str().unwrap()),
+            Some("1"),
+            "merge_pr: a capacity shed must tell the client when to retry"
+        );
+
+        // MUST-NOT: with the pool free again the merge is not shed as capacity (it
+        // fails later on the nonexistent on-disk repo, which is a git 500).
+        held.release(false).await;
+        let admitted = merge_pr(
+            State(state.clone()),
+            Extension(AuthenticatedDid(owner.to_string())),
+            Path((owner.to_string(), "lp-merge".to_string(), 1)),
+        )
+        .await;
+        assert!(
+            !matches!(admitted, Err(AppError::Overloaded(_))),
+            "with the lock pool free, merge_pr must not be shed as capacity; got {:?}",
+            admitted.err()
+        );
+    }
+}

crates/gitlawb-node/src/api/register.rs

@@ -1,8 +1,8 @@
 use axum::extract::State;
 use axum::http::StatusCode;
 use axum::Json;
-use serde::{Deserialize, Serialize};
 use chrono::Utc;
+use serde::{Deserialize, Serialize};
 
 use gitlawb_core::did::Did;
 use gitlawb_core::ucan::Ucan;
@@ -35,38 +35,66 @@ pub struct RegisterResponse {
 /// Accepts only requests with a valid HTTP Signature (enforced by middleware).
 pub async fn register(
     State(state): State<AppState>,
+    axum::Extension(auth): axum::Extension<crate::auth::AuthenticatedDid>,
+    headers: axum::http::HeaderMap,
     Json(req): Json<RegisterRequest>,
 ) -> Result<(StatusCode, Json<RegisterResponse>)> {
+    // iCaptcha gate (inert unless ICAPTCHA_MODE is set). Verify up front; spend
+    // the proof only once the request is admissible, just before the write, so a
+    // rejected request never burns a valid proof.
+    let proof = crate::icaptcha::verify_request(&headers, &auth.0)?;
+
     // Parse and validate the DID
-    let agent_did: Did = req.did.parse()
+    let agent_did: Did = req
+        .did
+        .parse()
         .map_err(|e: gitlawb_core::Error| AppError::BadRequest(e.to_string()))?;
 
+    // Bind registration to the authenticated signer: an agent may only register
+    // itself, not create or refresh a trust row for a DID it does not control.
+    if !crate::api::did_matches(&auth.0, agent_did.as_str()) {
+        return Err(AppError::Forbidden(
+            "did must be the authenticated signer".into(),
+        ));
+    }
+
+    // Request is admissible — spend the proof now, immediately before the write.
+    proof.consume(&state.db).await?;
+
     // Store the agent in the local index
-    state.db.register_agent(agent_did.as_str(), &req.capabilities).await?;
+    state
+        .db
+        .register_agent(agent_did.as_str(), &req.capabilities)
+        .await?;
 
     // Grant a small baseline trust score on first registration (verified via HTTP Signature).
     // Score grows further with pushes, PRs, and issue activity.
     let initial_trust = 0.05;
-    let _ = state.db.update_trust_score(agent_did.as_str(), initial_trust).await;
+    let _ = state
+        .db
+        .update_trust_score(agent_did.as_str(), initial_trust)
+        .await;
 
     // Issue a bootstrap UCAN from the node's identity
     let ucan = Ucan::bootstrap(&state.node_keypair, agent_did.clone())
         .map_err(|e| AppError::Internal(e.into()))?;
 
     let exp = Utc::now() + chrono::Duration::days(30);
-    let ucan_encoded = ucan.encode()
-        .map_err(|e| AppError::Internal(e.into()))?;
+    let ucan_encoded = ucan.encode().map_err(|e| AppError::Internal(e.into()))?;
 
     tracing::info!(did = %agent_did, "registered new agent");
 
-    Ok((StatusCode::CREATED, Json(RegisterResponse {
-        status: "accepted".to_string(),
-        did: agent_did.to_string(),
-        ucan: ucan_encoded,
-        node: format!("{}:{}", state.config.host, state.config.port),
-        expires: exp.to_rfc3339(),
-        trust_score: initial_trust,
-        capabilities: req.capabilities,
-        message: "welcome to the network, agent.".to_string(),
-    })))
+    Ok((
+        StatusCode::CREATED,
+        Json(RegisterResponse {
+            status: "accepted".to_string(),
+            did: agent_did.to_string(),
+            ucan: ucan_encoded,
+            node: format!("{}:{}", state.config.host, state.config.port),
+            expires: exp.to_rfc3339(),
+            trust_score: initial_trust,
+            capabilities: req.capabilities,
+            message: "welcome to the network, agent.".to_string(),
+        }),
+    ))
 }

crates/gitlawb-node/src/api/replicas.rs

@@ -0,0 +1,203 @@
+//! Repo replica registration API.
+//!
+//! Lets a node tell the origin "I'm hosting a replica of your repo." The
+//! origin records the (replica DID, replica URL) pair and exposes the list
+//! publicly so anyone can see how many nodes are mirroring a given repo.
+//!
+//! Endpoints:
+//! - `PUT  /api/v1/repos/:owner/:repo/replicas`     (auth)   register
+//! - `DELETE /api/v1/repos/:owner/:repo/replicas`   (auth)   unregister
+//! - `GET  /api/v1/repos/:owner/:repo/replicas`     (public) list
+//!
+//! Auth model: the caller's DID (verified via HTTP Signatures) is the
+//! replica's identity. There's no separate "claim this URL" check — replicas
+//! self-report their public URL. Operators viewing the list should treat
+//! replica URLs as advisory until they actually reach out and verify.
+
+use axum::extract::{Extension, Path, State};
+use axum::http::StatusCode;
+use axum::Json;
+use serde::Deserialize;
+
+use crate::auth::AuthenticatedDid;
+use crate::error::{AppError, Result};
+use crate::state::AppState;
+
+#[derive(Debug, Deserialize)]
+pub struct RegisterReplicaRequest {
+    /// Publicly reachable URL of the replica node (e.g. `https://my-node.example.com`).
+    pub url: String,
+}
+
+/// PUT /api/v1/repos/:owner/:repo/replicas
+/// Idempotent — first registration returns 201, subsequent ones update the URL and return 200.
+pub async fn register_replica(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path((owner, repo)): Path<(String, String)>,
+    Json(req): Json<RegisterReplicaRequest>,
+) -> Result<(StatusCode, Json<serde_json::Value>)> {
+    validate_replica_url(&req.url)?;
+
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+
+    let replica_did = &auth.0;
+
+    // Don't let an owner register themselves as a replica of their own repo
+    // (did_matches handles the full vs bare did:key owner form).
+    if crate::api::did_matches(replica_did, &record.owner_did) {
+        return Err(AppError::BadRequest(
+            "the repo owner is not a replica of their own repo".into(),
+        ));
+    }
+
+    let inserted = state
+        .db
+        .register_replica(&record.id, replica_did, &req.url)
+        .await?;
+    let count = state.db.count_replicas(&record.id).await?;
+
+    let status = if inserted {
+        StatusCode::CREATED
+    } else {
+        StatusCode::OK
+    };
+
+    tracing::info!(
+        repo = %repo,
+        replica = %replica_did,
+        url = %req.url,
+        "replica registered"
+    );
+
+    Ok((
+        status,
+        Json(serde_json::json!({
+            "status": "registered",
+            "repo": format!("{owner}/{repo}"),
+            "replica_did": replica_did,
+            "replica_url": req.url,
+            "replica_count": count,
+        })),
+    ))
+}
+
+/// DELETE /api/v1/repos/:owner/:repo/replicas
+/// Idempotent — no error if the caller wasn't registered.
+pub async fn unregister_replica(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+
+    let replica_did = &auth.0;
+    state.db.unregister_replica(&record.id, replica_did).await?;
+    let count = state.db.count_replicas(&record.id).await?;
+
+    tracing::info!(repo = %repo, replica = %replica_did, "replica unregistered");
+
+    Ok(Json(serde_json::json!({
+        "status": "unregistered",
+        "repo": format!("{owner}/{repo}"),
+        "replica_count": count,
+    })))
+}
+
+/// GET /api/v1/repos/:owner/:repo/replicas
+/// Public — returns the list of replicas (DID + URL + registration timestamp).
+pub async fn list_replicas(
+    State(state): State<AppState>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+
+    let replicas = state.db.list_replicas(&record.id).await?;
+
+    Ok(Json(serde_json::json!({
+        "repo": format!("{owner}/{repo}"),
+        "replica_count": replicas.len(),
+        "replicas": replicas,
+    })))
+}
+
+/// Basic URL hygiene — must be http(s), parseable, length-bounded.
+fn validate_replica_url(url: &str) -> Result<()> {
+    if url.is_empty() {
+        return Err(AppError::BadRequest("replica url is empty".into()));
+    }
+    if url.len() > 512 {
+        return Err(AppError::BadRequest("replica url exceeds 512 chars".into()));
+    }
+    if !(url.starts_with("http://") || url.starts_with("https://")) {
+        return Err(AppError::BadRequest(
+            "replica url must start with http:// or https://".into(),
+        ));
+    }
+    // No spaces / control chars / newlines.
+    if url.chars().any(|c| c.is_whitespace() || c.is_control()) {
+        return Err(AppError::BadRequest(
+            "replica url contains whitespace or control characters".into(),
+        ));
+    }
+    Ok(())
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn url_accepts_normal_https() {
+        validate_replica_url("https://node.example.com").unwrap();
+        validate_replica_url("https://my-node.example.com:7545").unwrap();
+        validate_replica_url("http://localhost:7545").unwrap();
+    }
+
+    #[test]
+    fn url_rejects_empty() {
+        assert!(validate_replica_url("").is_err());
+    }
+
+    #[test]
+    fn url_rejects_non_http_scheme() {
+        for bad in [
+            "ftp://host",
+            "file:///etc/passwd",
+            "javascript:alert(1)",
+            "/path",
+        ] {
+            assert!(validate_replica_url(bad).is_err(), "{bad:?} must reject");
+        }
+    }
+
+    #[test]
+    fn url_rejects_whitespace_and_control() {
+        for bad in [
+            "https://host .com",
+            "https://host\n.com",
+            "https://host\t.com",
+            "https://host\0evil.com",
+        ] {
+            assert!(validate_replica_url(bad).is_err(), "{bad:?} must reject");
+        }
+    }
+
+    #[test]
+    fn url_rejects_overlong() {
+        let long = format!("https://{}.com", "a".repeat(600));
+        assert!(validate_replica_url(&long).is_err());
+    }
+}

crates/gitlawb-node/src/api/stars.rs

@@ -2,14 +2,14 @@
 //!
 //! Any authenticated agent can star or unstar a repo.
 //! One agent = one star per repo (enforced by UNIQUE constraint in repo_stars).
-//! Star count is public — no auth required on GET.
+//! Star count is gated on repo read access.
 
 use axum::extract::{Extension, Path, State};
 use axum::http::StatusCode;
 use axum::Json;
 
 use crate::auth::AuthenticatedDid;
-use crate::error::{AppError, Result};
+use crate::error::Result;
 use crate::state::AppState;
 
 /// PUT /api/v1/repos/:owner/:repo/star
@@ -19,22 +19,29 @@ pub async fn star_repo(
     Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, repo)): Path<(String, String)>,
 ) -> Result<(StatusCode, Json<serde_json::Value>)> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, Some(auth.0.as_str()), "/").await?;
 
     let caller = &auth.0;
     let inserted = state.db.star_repo(&record.id, caller).await?;
     let count = state.db.count_stars(&record.id).await?;
 
-    let status = if inserted { StatusCode::CREATED } else { StatusCode::OK };
+    let status = if inserted {
+        StatusCode::CREATED
+    } else {
+        StatusCode::OK
+    };
 
     tracing::info!(repo = %repo, caller = %caller, "repo starred");
 
-    Ok((status, Json(serde_json::json!({
-        "status": "starred",
-        "repo": format!("{owner}/{repo}"),
-        "star_count": count,
-    }))))
+    Ok((
+        status,
+        Json(serde_json::json!({
+            "status": "starred",
+            "repo": format!("{owner}/{repo}"),
+            "star_count": count,
+        })),
+    ))
 }
 
 /// DELETE /api/v1/repos/:owner/:repo/star
@@ -44,8 +51,8 @@ pub async fn unstar_repo(
     Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, repo)): Path<(String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, Some(auth.0.as_str()), "/").await?;
 
     let caller = &auth.0;
     state.db.unstar_repo(&record.id, caller).await?;
@@ -61,13 +68,15 @@ pub async fn unstar_repo(
 }
 
 /// GET /api/v1/repos/:owner/:repo/star
-/// Returns star count — unauthenticated.
+/// Returns star count for callers who can read the repo.
 pub async fn get_star_status(
     State(state): State<AppState>,
     Path((owner, repo)): Path<(String, String)>,
+    auth: Option<Extension<AuthenticatedDid>>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &repo).await?
-        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+    let (record, _rules) =
+        crate::api::authorize_repo_read(&state, &owner, &repo, caller, "/").await?;
 
     let count = state.db.count_stars(&record.id).await?;
 

crates/gitlawb-node/src/api/tasks.rs

@@ -9,7 +9,7 @@
 //!   POST   /api/v1/tasks/{id}/fail          — fail task
 
 use axum::{
-    extract::{Path, Query, State},
+    extract::{Extension, Path, Query, State},
     http::StatusCode,
     Json,
 };
@@ -18,9 +18,18 @@ use serde::Deserialize;
 use serde_json::{json, Value};
 use uuid::Uuid;
 
+use crate::auth::AuthenticatedDid;
 use crate::db::AgentTask;
 use crate::state::{AppState, TaskEventBroadcast};
 
+/// 403 in this module's error shape (`(StatusCode, Json<Value>)`, not `AppError`).
+fn forbidden(msg: &str) -> (StatusCode, Json<Value>) {
+    (
+        StatusCode::FORBIDDEN,
+        Json(json!({ "error": "forbidden", "message": msg })),
+    )
+}
+
 // ── Request / response types ──────────────────────────────────────────────────
 
 #[derive(Deserialize)]
@@ -55,13 +64,11 @@ pub struct ClaimTaskBody {
 #[derive(Deserialize)]
 pub struct CompleteTaskBody {
     pub result: Option<String>,
-    pub by_did: Option<String>,
 }
 
 #[derive(Deserialize)]
 pub struct FailTaskBody {
     pub reason: Option<String>,
-    pub by_did: Option<String>,
 }
 
 fn task_to_json(t: &AgentTask) -> Value {
@@ -87,15 +94,20 @@ fn task_to_json(t: &AgentTask) -> Value {
 /// POST /api/v1/tasks
 pub async fn create_task(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Json(body): Json<CreateTaskBody>,
 ) -> Result<(StatusCode, Json<Value>), (StatusCode, Json<Value>)> {
+    // Bind the delegator to the authenticated signer (N13).
+    if !crate::api::did_matches(&auth.0, &body.delegator_did) {
+        return Err(forbidden("delegator_did must be the authenticated signer"));
+    }
     let now = Utc::now().to_rfc3339();
     let task = AgentTask {
         id: Uuid::new_v4().to_string(),
         repo_id: body.repo_id,
         kind: body.kind,
         status: "pending".to_string(),
-        delegator_did: body.delegator_did,
+        delegator_did: auth.0,
         assignee_did: body.assignee_did,
         capability: body.capability,
         ucan_token: body.ucan_token,
@@ -154,24 +166,25 @@ pub async fn get_task(
 /// POST /api/v1/tasks/{id}/claim
 pub async fn claim_task(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path(id): Path<String>,
     Json(body): Json<ClaimTaskBody>,
 ) -> Result<Json<Value>, (StatusCode, Json<Value>)> {
-    let task = state
-        .db
-        .claim_task(&id, &body.assignee_did)
-        .await
-        .map_err(|e| {
-            (
-                StatusCode::CONFLICT,
-                Json(json!({ "error": e.to_string() })),
-            )
-        })?;
+    // Bind the assignee to the authenticated signer (N13).
+    if !crate::api::did_matches(&auth.0, &body.assignee_did) {
+        return Err(forbidden("assignee_did must be the authenticated signer"));
+    }
+    let task = state.db.claim_task(&id, &auth.0).await.map_err(|e| {
+        (
+            StatusCode::CONFLICT,
+            Json(json!({ "error": e.to_string() })),
+        )
+    })?;
     let _ = state.task_event_tx.send(TaskEventBroadcast {
         task_id: id,
         old_status: "pending".to_string(),
         new_status: "claimed".to_string(),
-        by_did: body.assignee_did,
+        by_did: auth.0,
         at: Utc::now().to_rfc3339(),
     });
     Ok(Json(task_to_json(&task)))
@@ -180,17 +193,44 @@ pub async fn claim_task(
 /// POST /api/v1/tasks/{id}/complete
 pub async fn complete_task(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path(id): Path<String>,
     Json(body): Json<CompleteTaskBody>,
 ) -> Result<Json<Value>, (StatusCode, Json<Value>)> {
-    let by_did = body.by_did.unwrap_or_default();
+    // Authorize the actor, not just bind their identity: the N13 signer-binding
+    // proved the caller was whoever they claimed, but never that they were the
+    // task's assignee. Load the task and require the caller to be its assignee;
+    // finish_task then transitions only a claimed task.
+    let existing = state
+        .db
+        .get_task(&id)
+        .await
+        .map_err(|e| {
+            (
+                StatusCode::INTERNAL_SERVER_ERROR,
+                Json(json!({ "error": e.to_string() })),
+            )
+        })?
+        .ok_or_else(|| {
+            (
+                StatusCode::NOT_FOUND,
+                Json(json!({ "error": "task not found" })),
+            )
+        })?;
+    if !crate::api::did_matches(
+        &auth.0,
+        existing.assignee_did.as_deref().unwrap_or_default(),
+    ) {
+        return Err(forbidden("only the task assignee can complete it"));
+    }
+    let by_did = auth.0;
     let task = state
         .db
         .finish_task(&id, "completed", body.result.as_deref())
         .await
         .map_err(|e| {
             (
-                StatusCode::UNPROCESSABLE_ENTITY,
+                StatusCode::CONFLICT,
                 Json(json!({ "error": e.to_string() })),
             )
         })?;
@@ -207,10 +247,36 @@ pub async fn complete_task(
 /// POST /api/v1/tasks/{id}/fail
 pub async fn fail_task(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path(id): Path<String>,
     Json(body): Json<FailTaskBody>,
 ) -> Result<Json<Value>, (StatusCode, Json<Value>)> {
-    let by_did = body.by_did.unwrap_or_default();
+    // Authorize the actor, not just bind their identity (see complete_task): only
+    // the task's assignee may fail it, and finish_task transitions only a claimed
+    // task.
+    let existing = state
+        .db
+        .get_task(&id)
+        .await
+        .map_err(|e| {
+            (
+                StatusCode::INTERNAL_SERVER_ERROR,
+                Json(json!({ "error": e.to_string() })),
+            )
+        })?
+        .ok_or_else(|| {
+            (
+                StatusCode::NOT_FOUND,
+                Json(json!({ "error": "task not found" })),
+            )
+        })?;
+    if !crate::api::did_matches(
+        &auth.0,
+        existing.assignee_did.as_deref().unwrap_or_default(),
+    ) {
+        return Err(forbidden("only the task assignee can fail it"));
+    }
+    let by_did = auth.0;
     let reason = body.reason.unwrap_or_default();
     let task = state
         .db
@@ -218,7 +284,7 @@ pub async fn fail_task(
         .await
         .map_err(|e| {
             (
-                StatusCode::UNPROCESSABLE_ENTITY,
+                StatusCode::CONFLICT,
                 Json(json!({ "error": e.to_string() })),
             )
         })?;

crates/gitlawb-node/src/api/visibility.rs

@@ -0,0 +1,275 @@
+//! Path-scoped visibility management API. Owner-only, mirrors `api/protect.rs`.
+
+use axum::extract::{Extension, Path, State};
+use axum::http::StatusCode;
+use axum::Json;
+use serde::Deserialize;
+
+use crate::auth::AuthenticatedDid;
+use crate::db::VisibilityMode;
+use crate::error::{AppError, Result};
+use crate::state::AppState;
+
+#[derive(Deserialize)]
+pub struct SetVisibilityRequest {
+    pub path_glob: String,
+    /// "a" or "b"; defaults to "b" if absent or unrecognized.
+    #[serde(default)]
+    pub mode: Option<String>,
+    #[serde(default)]
+    pub reader_dids: Vec<String>,
+}
+
+#[derive(Deserialize)]
+pub struct RemoveVisibilityRequest {
+    pub path_glob: String,
+}
+
+fn require_owner(record: &crate::db::RepoRecord, caller: &str) -> Result<()> {
+    // DID-safe owner match (collapses did:key full vs bare on both sides, never
+    // across methods), shared with require_repo_owner — not a trailing-segment
+    // compare that only normalized the owner side.
+    if crate::api::did_matches(caller, &record.owner_did) {
+        Ok(())
+    } else {
+        Err(AppError::Forbidden(
+            "only the repo owner can manage visibility".into(),
+        ))
+    }
+}
+
+/// Reject malformed globs before they reach the store, where they would
+/// silently misconfigure access (an empty glob behaves like "/", and a glob
+/// without a leading "/" never matches a real repo path). The accepted forms
+/// match what `visibility_check` understands: "/", "/prefix", or "/prefix/**".
+fn validate_path_glob(path_glob: &str) -> Result<()> {
+    if !path_glob.starts_with('/') {
+        return Err(AppError::BadRequest("path_glob must start with '/'".into()));
+    }
+    if path_glob == "/**" {
+        return Err(AppError::BadRequest(
+            "use '/' for whole-repo scope, not '/**'".into(),
+        ));
+    }
+    if path_glob != "/" && path_glob.ends_with('/') {
+        return Err(AppError::BadRequest(
+            "path_glob must not end with '/'".into(),
+        ));
+    }
+    // Reject empty path segments. `glob_prefix` collapses "//**" to "/" (whole
+    // repo), so without this an operator could bypass the "/**" guard above and
+    // grant repo-wide read with "//**", or set a dead rule like "//secret/**"
+    // whose prefix never matches a real single-slash path and silently leaves
+    // the subtree readable.
+    if path_glob.contains("//") {
+        return Err(AppError::BadRequest(
+            "path_glob must not contain empty path segments".into(),
+        ));
+    }
+    // Strip the one permitted trailing "/**" before checking for stray
+    // wildcards, otherwise a "*" elsewhere in the prefix (e.g. "/a*b/**" or
+    // "/a/**/**") slips through because the string still ends with "/**".
+    let prefix = path_glob.strip_suffix("/**").unwrap_or(path_glob);
+    if prefix.contains('*') {
+        return Err(AppError::BadRequest(
+            "the only supported wildcard is a single trailing '/**'".into(),
+        ));
+    }
+    Ok(())
+}
+
+/// PUT /api/v1/repos/{owner}/{repo}/visibility
+pub async fn set_visibility(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path((owner, repo)): Path<(String, String)>,
+    Json(req): Json<SetVisibilityRequest>,
+) -> Result<(StatusCode, Json<serde_json::Value>)> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    require_owner(&record, &auth.0)?;
+    validate_path_glob(&req.path_glob)?;
+
+    let mode = match req.mode.as_deref() {
+        Some("a") => VisibilityMode::A,
+        _ => VisibilityMode::B,
+    };
+
+    // Mode A hides existence and is only coherent for the whole repo; a subtree
+    // cannot hide its existence without rewriting git history (see spec).
+    if mode == VisibilityMode::A && req.path_glob != "/" {
+        return Err(AppError::BadRequest(
+            "mode 'a' (hide) is only allowed for the whole repo (path_glob '/'); use mode 'b' for subtrees".into(),
+        ));
+    }
+
+    // An empty reader_dids list is valid and intentional: the owner is always
+    // allowed by visibility_check, so a "/" rule with no readers is exactly the
+    // whole-repo "private to owner only" case.
+    state
+        .db
+        .set_visibility_rule(&record.id, &req.path_glob, mode, &req.reader_dids, &auth.0)
+        .await?;
+
+    let subtree_warning = req.path_glob != "/";
+    tracing::info!(
+        repo = %repo, caller = %auth.0, path_glob = %req.path_glob, mode = %mode.as_str(),
+        subtree_pending = subtree_warning,
+        "visibility rule set"
+    );
+
+    Ok((
+        StatusCode::CREATED,
+        Json(serde_json::json!({
+            "status": "set",
+            "repo": format!("{owner}/{repo}"),
+            "path_glob": req.path_glob,
+            "mode": mode.as_str(),
+            "reader_dids": req.reader_dids,
+            "subtree_clone_enforcement_pending": subtree_warning,
+        })),
+    ))
+}
+
+/// DELETE /api/v1/repos/{owner}/{repo}/visibility
+pub async fn remove_visibility(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path((owner, repo)): Path<(String, String)>,
+    Json(req): Json<RemoveVisibilityRequest>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    require_owner(&record, &auth.0)?;
+
+    state
+        .db
+        .remove_visibility_rule(&record.id, &req.path_glob)
+        .await?;
+
+    tracing::info!(
+        repo = %repo, caller = %auth.0, path_glob = %req.path_glob,
+        "visibility rule removed"
+    );
+
+    Ok(Json(serde_json::json!({
+        "status": "removed",
+        "repo": format!("{owner}/{repo}"),
+        "path_glob": req.path_glob,
+    })))
+}
+
+/// GET /api/v1/repos/{owner}/{repo}/visibility
+pub async fn list_visibility(
+    State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+    require_owner(&record, &auth.0)?;
+
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    let rules_json: Vec<_> = rules
+        .into_iter()
+        .map(|r| {
+            serde_json::json!({
+                "path_glob": r.path_glob,
+                "mode": r.mode.as_str(),
+                "reader_dids": r.reader_dids,
+                "created_by": r.created_by,
+            })
+        })
+        .collect();
+
+    Ok(Json(serde_json::json!({
+        "repo": format!("{owner}/{repo}"),
+        "count": rules_json.len(),
+        "rules": rules_json,
+    })))
+}
+
+/// GET /api/v1/repos/{owner}/{repo}/withheld-paths
+///
+/// Returns the path globs the (optionally authenticated) caller is denied
+/// (`withheld`) plus any more-specific globs that are allowed underneath a
+/// denied one (`reinclude`), so a clean-clone client can sparse-exclude the
+/// denied subtrees while re-including the allowed nested paths. Unlike
+/// `list_visibility` this is not owner-gated and never exposes reader_dids.
+pub async fn withheld_paths(
+    State(state): State<AppState>,
+    auth: Option<Extension<AuthenticatedDid>>,
+    Path((owner, repo)): Path<(String, String)>,
+) -> Result<Json<serde_json::Value>> {
+    let record = state
+        .db
+        .get_repo(&owner, &repo)
+        .await?
+        .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{repo}")))?;
+
+    let rules = state.db.list_visibility_rules(&record.id).await?;
+    let caller = auth.as_ref().map(|e| e.0 .0.as_str());
+
+    // Whole-repo read gate: a caller who cannot read "/" gets repo-not-found,
+    // matching the git read endpoints, so this never discloses a private repo's
+    // existence or its path layout to an unauthorized caller.
+    if crate::visibility::visibility_check(&rules, record.is_public, &record.owner_did, caller, "/")
+        == crate::visibility::Decision::Deny
+    {
+        return Err(AppError::RepoNotFound(format!("{owner}/{repo}")));
+    }
+
+    let withheld =
+        crate::visibility::withheld_globs(&rules, record.is_public, &record.owner_did, caller);
+    let reinclude =
+        crate::visibility::reincluded_globs(&rules, record.is_public, &record.owner_did, caller);
+
+    Ok(Json(serde_json::json!({
+        "repo": format!("{owner}/{repo}"),
+        "withheld": withheld,
+        "reinclude": reinclude,
+    })))
+}
+
+#[cfg(test)]
+mod tests {
+    use super::validate_path_glob;
+
+    #[test]
+    fn accepts_supported_globs() {
+        for g in ["/", "/secret", "/secret/**", "/a/b/c", "/a/b/**"] {
+            assert!(validate_path_glob(g).is_ok(), "{g} should be valid");
+        }
+    }
+
+    #[test]
+    fn rejects_malformed_globs() {
+        // empty, no leading slash, whole-repo via "/**", trailing slash,
+        // non-trailing wildcards, double wildcards, and empty path segments
+        // (which would collapse to whole-repo or a dead rule) are all rejected.
+        for g in [
+            "",
+            "secret/**",
+            "/**",
+            "/**/**",
+            "/secret/",
+            "/a*b",
+            "/*/x",
+            "/a*b/**",
+            "/a/**/**",
+            "//**",
+            "//secret/**",
+        ] {
+            assert!(validate_path_glob(g).is_err(), "{g} should be rejected");
+        }
+    }
+}

crates/gitlawb-node/src/api/webhooks.rs

@@ -33,12 +33,22 @@ pub async fn create_webhook(
     Path((owner, name)): Path<(String, String)>,
     Json(req): Json<CreateWebhookRequest>,
 ) -> Result<(StatusCode, Json<Webhook>)> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    crate::api::require_repo_owner(&record, &auth.0)?;
 
-    // Validate URL is http/https
-    if !req.url.starts_with("http://") && !req.url.starts_with("https://") {
-        return Err(AppError::BadRequest("webhook URL must be http:// or https://".into()));
+    // Gate the target through the same hardened public-host validator the peer
+    // announce path uses, so an authenticated owner cannot register a webhook
+    // that makes the node POST to loopback/private/link-local/metadata
+    // endpoints (SSRF). Delivery runs on the shared no-redirect client
+    // (main.rs), which closes the 3xx-to-internal bounce.
+    if !crate::api::peers::is_public_http_url(&req.url) {
+        return Err(AppError::BadRequest(
+            "webhook URL must be a public http(s) URL (no loopback, private, or .internal/.local hosts)".into(),
+        ));
     }
 
     let events = req.events.unwrap_or_else(|| vec!["*".into()]);
@@ -64,29 +74,47 @@ pub async fn list_webhooks(
     State(state): State<AppState>,
     Path((owner, name)): Path<(String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
 
     let hooks = state.db.list_webhooks(&record.id).await?;
     // Redact secrets in list response
-    let redacted: Vec<_> = hooks.into_iter().map(|mut h| {
-        if h.secret.is_some() { h.secret = Some("***".into()); }
-        h
-    }).collect();
+    let redacted: Vec<_> = hooks
+        .into_iter()
+        .map(|mut h| {
+            if h.secret.is_some() {
+                h.secret = Some("***".into());
+            }
+            h
+        })
+        .collect();
 
-    Ok(Json(serde_json::json!({ "webhooks": redacted, "count": redacted.len() })))
+    Ok(Json(
+        serde_json::json!({ "webhooks": redacted, "count": redacted.len() }),
+    ))
 }
 
 /// DELETE /api/v1/repos/:owner/:repo/hooks/:id
 pub async fn delete_webhook(
     State(state): State<AppState>,
+    Extension(auth): Extension<AuthenticatedDid>,
     Path((owner, name, id)): Path<(String, String, String)>,
 ) -> Result<Json<serde_json::Value>> {
-    let record = state.db.get_repo(&owner, &name).await?
+    let record = state
+        .db
+        .get_repo(&owner, &name)
+        .await?
         .ok_or_else(|| AppError::RepoNotFound(format!("{owner}/{name}")))?;
+    crate::api::require_repo_owner(&record, &auth.0)?;
 
     // Verify the webhook belongs to this repo
-    let hook = state.db.get_webhook(&id).await?
+    let hook = state
+        .db
+        .get_webhook(&id)
+        .await?
         .ok_or_else(|| AppError::NotFound(format!("webhook {id} not found")))?;
 
     if hook.repo_id != record.id {
@@ -96,3 +124,35 @@ pub async fn delete_webhook(
     state.db.delete_webhook(&id).await?;
     Ok(Json(serde_json::json!({ "deleted": true, "id": id })))
 }
+
+#[cfg(test)]
+mod tests {
+    use crate::api::peers::is_public_http_url;
+
+    // create_webhook gates req.url through is_public_http_url. Pin the exact
+    // SSRF targets from issue #81 so the webhook path can never regress to the
+    // old scheme-only check, independent of the validator's own peer tests.
+    #[test]
+    fn webhook_url_gate_rejects_ssrf_targets() {
+        for bad in [
+            "http://127.0.0.1:5432/",
+            "http://169.254.169.254/latest/meta-data/",
+            "http://localhost/",
+            "http://10.0.0.5/",
+            "http://[::1]/",
+            // IPv6 transition encodings smuggling loopback v4 (6to4 / NAT64).
+            "http://[2002:7f00:1::]/",
+            "http://[64:ff9b::7f00:1]/",
+            "ftp://example.com/",
+            "not-a-url",
+        ] {
+            assert!(!is_public_http_url(bad), "{bad:?} must be rejected");
+        }
+    }
+
+    #[test]
+    fn webhook_url_gate_allows_public_targets() {
+        assert!(is_public_http_url("https://hooks.example.com/gitlawb"));
+        assert!(is_public_http_url("http://203.0.113.10:7545/"));
+    }
+}

crates/gitlawb-node/src/arweave.rs

@@ -20,7 +20,6 @@
 use anyhow::Result;
 use serde_json::json;
 
-
 /// Data describing a ref-update event to be anchored.
 #[derive(Debug, Clone)]
 pub struct RefAnchor {
@@ -104,6 +103,108 @@ pub async fn anchor_ref_update(
     Ok(tx_id)
 }
 
+/// A per-push manifest of the blobs encrypted this push (Option B3). The
+/// `blobs` slice is `(oid, cid)` tuples. Anchored directly to Arweave as its JSON
+/// body so the discovery index survives total node loss. Recipient identities are
+/// never part of the manifest.
+pub struct EncryptedManifest<'a> {
+    pub repo: &'a str,
+    pub owner_did: &'a str,
+    pub node_did: &'a str,
+    pub timestamp: &'a str,
+    pub blobs: &'a [(String, String)],
+}
+
+/// Anchor a per-push encrypted-blob manifest to Arweave via Irys. The manifest
+/// JSON body is the payload (not a CID pointer to IPFS), so the index is
+/// permanent and self-contained. Recipient identities are deliberately omitted:
+/// the anchor is permanent and public, and the v2 envelopes no longer expose
+/// recipients, so the reader set must not be written to Arweave either.
+///
+/// Returns the Irys/Arweave transaction ID, or `Ok("")` when `irys_url` is empty
+/// (anchoring disabled) or there are no blobs to anchor.
+pub async fn anchor_encrypted_manifest(
+    client: &reqwest::Client,
+    irys_url: &str,
+    manifest: &EncryptedManifest<'_>,
+) -> Result<String> {
+    if irys_url.is_empty() || manifest.blobs.is_empty() {
+        return Ok(String::new());
+    }
+
+    let blobs_json: Vec<serde_json::Value> = manifest
+        .blobs
+        .iter()
+        .map(|(oid, cid)| manifest_blob_json(oid, cid))
+        .collect();
+
+    let payload = json!({
+        "schema": "gitlawb/encrypted-manifest/v1",
+        "repo": manifest.repo,
+        "owner_did": manifest.owner_did,
+        "node_did": manifest.node_did,
+        "timestamp": manifest.timestamp,
+        "blobs": blobs_json,
+    });
+
+    let body = serde_json::to_vec(&payload)?;
+    let url = format!("{}/upload", irys_url.trim_end_matches('/'));
+
+    let resp = client
+        .post(&url)
+        .header("Content-Type", "application/json")
+        .header("x-irys-tags", build_manifest_tags_header(manifest))
+        .body(body)
+        .send()
+        .await
+        .map_err(|e| anyhow::anyhow!("Irys upload failed: {e}"))?;
+
+    if !resp.status().is_success() {
+        let status = resp.status();
+        let body = resp.text().await.unwrap_or_default();
+        return Err(anyhow::anyhow!("Irys returned {status}: {body}"));
+    }
+
+    let json: serde_json::Value = resp
+        .json()
+        .await
+        .map_err(|e| anyhow::anyhow!("failed to parse Irys response: {e}"))?;
+
+    let tx_id = json["id"]
+        .as_str()
+        .ok_or_else(|| anyhow::anyhow!("no 'id' in Irys response: {json}"))?
+        .to_string();
+
+    tracing::info!(
+        repo = %manifest.repo,
+        tx_id = %tx_id,
+        blobs = manifest.blobs.len(),
+        "anchored encrypted manifest to Arweave"
+    );
+
+    Ok(tx_id)
+}
+
+/// Serialize one blob for the Arweave manifest. Recipient identities are
+/// intentionally absent so the permanent public anchor never records who can
+/// read a blob.
+fn manifest_blob_json(oid: &str, cid: &str) -> serde_json::Value {
+    json!({ "oid": oid, "cid": cid })
+}
+
+/// Build the Irys tag header for an encrypted-blob manifest. `Repo` and `Schema`
+/// are the tags the `gl` recovery query filters on.
+fn build_manifest_tags_header(manifest: &EncryptedManifest<'_>) -> String {
+    [
+        "App-Name:gitlawb".to_string(),
+        "Schema:gitlawb/encrypted-manifest/v1".to_string(),
+        format!("Repo:{}", sanitize_tag(manifest.repo)),
+        format!("Owner-DID:{}", sanitize_tag(manifest.owner_did)),
+        format!("Node-DID:{}", sanitize_tag(manifest.node_did)),
+    ]
+    .join(",")
+}
+
 /// Arweave permanent URL for a given Irys transaction ID.
 pub fn arweave_url(tx_id: &str) -> String {
     format!("https://arweave.net/{tx_id}")
@@ -112,9 +213,9 @@ pub fn arweave_url(tx_id: &str) -> String {
 /// Build the Irys tag header value for Arweave indexing.
 /// Format: comma-separated "name:value" pairs.
 fn build_tags_header(anchor: &RefAnchor) -> String {
-    vec![
-        format!("App-Name:gitlawb"),
-        format!("Schema:gitlawb/ref-update/v1"),
+    [
+        "App-Name:gitlawb".to_string(),
+        "Schema:gitlawb/ref-update/v1".to_string(),
         format!("Repo:{}", sanitize_tag(&anchor.repo)),
         format!("Ref:{}", sanitize_tag(&anchor.ref_name)),
         format!("SHA:{}", &anchor.new_sha[..anchor.new_sha.len().min(16)]),
@@ -142,7 +243,7 @@ mod tests {
             repo: "alice/myrepo".into(),
             owner_did: "did:key:z6Mk...".into(),
             ref_name: "refs/heads/main".into(),
-            old_sha: "0000000000000000000000000000000000000000000000000000000000000000".into(),
+            old_sha: "0000000000000000000000000000000000000000".into(),
             new_sha: "a1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2".into(),
             cid: Some("bafyreib5...".into()),
             timestamp: "2026-03-14T00:00:00Z".into(),
@@ -169,7 +270,7 @@ mod tests {
             repo: "alice/myrepo".into(),
             owner_did: "did:key:z6Mk...".into(),
             ref_name: "refs/heads/main".into(),
-            old_sha: "0".repeat(64),
+            old_sha: "0".repeat(40),
             new_sha: "a1b2c3d4".repeat(8),
             cid: None,
             timestamp: "2026-03-14T00:00:00Z".into(),
@@ -178,14 +279,131 @@ mod tests {
 
         let result = anchor_ref_update(&client, &server.url(), &anchor).await;
         assert!(result.is_ok(), "anchor should succeed: {result:?}");
-        assert_eq!(result.unwrap(), "7xGpIoHUQ8j9GhD3Y2mKzP1NsVtXwRcFe4bEaLnMuOk");
+        assert_eq!(
+            result.unwrap(),
+            "7xGpIoHUQ8j9GhD3Y2mKzP1NsVtXwRcFe4bEaLnMuOk"
+        );
+        _mock.assert_async().await;
+    }
+
+    #[tokio::test]
+    async fn test_anchor_body_carries_real_old_sha() {
+        // The anchored body must serialize the real old→new transition the
+        // node was handed, never a zero placeholder. Regression guard for the
+        // push handler that used to hardcode `old_sha` to 64 zeros (#26).
+        let mut server = mockito::Server::new_async().await;
+        let real_old = "1111111111111111111111111111111111111111";
+        let real_new = "2222222222222222222222222222222222222222";
+        let _mock = server
+            .mock("POST", "/upload")
+            .match_body(mockito::Matcher::AllOf(vec![
+                mockito::Matcher::PartialJsonString(format!(r#"{{"old_sha":"{real_old}"}}"#)),
+                mockito::Matcher::PartialJsonString(format!(r#"{{"new_sha":"{real_new}"}}"#)),
+            ]))
+            .with_status(200)
+            .with_header("content-type", "application/json")
+            .with_body(r#"{"id":"TX_REAL_OLD_SHA","timestamp":1710000000000,"version":"1.0.0"}"#)
+            .create_async()
+            .await;
+
+        let client = reqwest::Client::new();
+        let anchor = RefAnchor {
+            repo: "alice/myrepo".into(),
+            owner_did: "did:key:z6Mk...".into(),
+            ref_name: "refs/heads/main".into(),
+            old_sha: real_old.into(),
+            new_sha: real_new.into(),
+            cid: None,
+            timestamp: "2026-03-14T00:00:00Z".into(),
+            node_did: "did:key:z6Mknnd...".into(),
+        };
+
+        let result = anchor_ref_update(&client, &server.url(), &anchor).await;
+        assert_eq!(result.unwrap(), "TX_REAL_OLD_SHA");
+        // The mock only matches when the posted JSON carries both real SHAs.
         _mock.assert_async().await;
     }
 
     #[test]
     fn test_arweave_url() {
         let url = arweave_url("7xGpIoHUQ8j9GhD3Y2mKzP1NsVtXwRcFe4bEaLnMuOk");
-        assert_eq!(url, "https://arweave.net/7xGpIoHUQ8j9GhD3Y2mKzP1NsVtXwRcFe4bEaLnMuOk");
+        assert_eq!(
+            url,
+            "https://arweave.net/7xGpIoHUQ8j9GhD3Y2mKzP1NsVtXwRcFe4bEaLnMuOk"
+        );
+    }
+
+    #[tokio::test]
+    async fn test_manifest_anchor_noop_when_url_empty() {
+        let client = reqwest::Client::new();
+        let blobs = vec![("oid1".to_string(), "cid1".to_string())];
+        let m = EncryptedManifest {
+            repo: "alice/r",
+            owner_did: "did:key:zO",
+            node_did: "did:key:zN",
+            timestamp: "2026-06-11T00:00:00Z",
+            blobs: &blobs,
+        };
+        assert_eq!(
+            anchor_encrypted_manifest(&client, "", &m).await.unwrap(),
+            ""
+        );
+    }
+
+    #[tokio::test]
+    async fn test_manifest_anchor_noop_when_no_blobs() {
+        let client = reqwest::Client::new();
+        let blobs: Vec<(String, String)> = vec![];
+        let m = EncryptedManifest {
+            repo: "alice/r",
+            owner_did: "did:key:zO",
+            node_did: "did:key:zN",
+            timestamp: "2026-06-11T00:00:00Z",
+            blobs: &blobs,
+        };
+        // Non-empty URL, but no blobs: still a no-op.
+        assert_eq!(
+            anchor_encrypted_manifest(&client, "https://example.invalid", &m)
+                .await
+                .unwrap(),
+            ""
+        );
+    }
+
+    #[tokio::test]
+    async fn test_manifest_anchor_success() {
+        let mut server = mockito::Server::new_async().await;
+        let _mock = server
+            .mock("POST", "/upload")
+            .with_status(200)
+            .with_header("content-type", "application/json")
+            .with_body(r#"{"id":"MANIFESTTX123","timestamp":1710000000000,"version":"1.0.0"}"#)
+            .create_async()
+            .await;
+
+        let client = reqwest::Client::new();
+        let blobs = vec![("oid1".to_string(), "cid1".to_string())];
+        let m = EncryptedManifest {
+            repo: "alice/r",
+            owner_did: "did:key:zO",
+            node_did: "did:key:zN",
+            timestamp: "2026-06-11T00:00:00Z",
+            blobs: &blobs,
+        };
+        let r = anchor_encrypted_manifest(&client, &server.url(), &m).await;
+        assert_eq!(r.unwrap(), "MANIFESTTX123");
+        _mock.assert_async().await;
+    }
+
+    #[test]
+    fn manifest_blob_json_omits_recipients() {
+        let v = manifest_blob_json("oid1", "cidA");
+        assert_eq!(v["oid"], "oid1");
+        assert_eq!(v["cid"], "cidA");
+        assert!(
+            v.get("recipients").is_none(),
+            "Arweave manifest must not anchor recipient identities"
+        );
     }
 
     #[test]

crates/gitlawb-node/src/auth/mod.rs

@@ -1,5 +1,5 @@
 use axum::body::Body;
-use axum::extract::Request;
+use axum::extract::{Request, State};
 use axum::http::StatusCode;
 use axum::middleware::Next;
 use axum::response::{IntoResponse, Response};
@@ -8,10 +8,27 @@ use http_body_util::BodyExt;
 use serde_json::json;
 use std::collections::HashMap;
 
+use gitlawb_core::did::Did;
+use gitlawb_core::ucan::Ucan;
+
+use crate::state::AppState;
+
 /// The authenticated agent's DID, injected into request extensions by `require_signature`.
 #[derive(Clone, Debug)]
 pub struct AuthenticatedDid(pub String);
 
+/// Whether `caller` is authorized to push to `record`.
+///
+/// Phase 1 (`GITLAWB_ENFORCE_OWNER_PUSH`): owner-only, via the canonical
+/// [`crate::api::did_matches`] owner comparison (DID-safe on both sides). This is
+/// intentionally a distinct, intent-named gate rather than a bare owner check so
+/// that Phase 2 can extend it to honor a verified UCAN `git/push` capability as a
+/// pure addition (`did_matches(..) || ucan_grants_push(..)`) without rewriting
+/// call sites.
+pub fn caller_authorized_to_push(record: &crate::db::RepoRecord, caller: &str) -> bool {
+    crate::api::did_matches(caller, &record.owner_did)
+}
+
 use gitlawb_core::http_sig::{
     build_signing_string, compute_content_digest, HttpSignature, COVERED_COMPONENTS,
 };
@@ -34,16 +51,17 @@ use gitlawb_core::identity::verify;
 pub async fn require_signature(request: Request, next: Next) -> Response {
     // Buffer the body so we can verify content-digest and pass it downstream
     let (parts, body) = request.into_parts();
-    let body_bytes = match body.collect().await {
-        Ok(collected) => collected.to_bytes(),
-        Err(_) => {
-            return (
+    let body_bytes =
+        match body.collect().await {
+            Ok(collected) => collected.to_bytes(),
+            Err(_) => return (
                 StatusCode::BAD_REQUEST,
-                Json(json!({ "error": "unreadable_body", "message": "could not read request body" })),
+                Json(
+                    json!({ "error": "unreadable_body", "message": "could not read request body" }),
+                ),
             )
-                .into_response()
-        }
-    };
+                .into_response(),
+        };
 
     let sig_input = parts
         .headers
@@ -61,8 +79,9 @@ pub async fn require_signature(request: Request, next: Next) -> Response {
         (Some(i), Some(s)) => (i, s),
         _ => {
             return human_detected(
-                "missing Signature-Input or Signature headers — use RFC 9421 HTTP Signatures"
-            ).into_response();
+                "missing Signature-Input or Signature headers — use RFC 9421 HTTP Signatures",
+            )
+            .into_response();
         }
     };
 
@@ -156,22 +175,21 @@ pub async fn require_signature(request: Request, next: Next) -> Response {
     request_values.insert("content-digest".to_string(), content_digest);
 
     // The @signature-params value is the part of Signature-Input after "sig1="
-    let sig_params_value = sig_input
-        .strip_prefix("sig1=")
-        .unwrap_or(&sig_input);
+    let sig_params_value = sig_input.strip_prefix("sig1=").unwrap_or(&sig_input);
 
     let components_ref: Vec<&str> = sig.components.iter().map(String::as_str).collect();
 
-    let signing_string = match build_signing_string(&components_ref, sig_params_value, &request_values) {
-        Ok(s) => s,
-        Err(e) => {
-            return (
-                StatusCode::BAD_REQUEST,
-                Json(json!({ "error": "signing_string_error", "message": e.to_string() })),
-            )
-                .into_response()
-        }
-    };
+    let signing_string =
+        match build_signing_string(&components_ref, sig_params_value, &request_values) {
+            Ok(s) => s,
+            Err(e) => {
+                return (
+                    StatusCode::BAD_REQUEST,
+                    Json(json!({ "error": "signing_string_error", "message": e.to_string() })),
+                )
+                    .into_response()
+            }
+        };
 
     // Verify Ed25519 signature
     let sig_array: [u8; 64] = match sig.signature_bytes.as_slice().try_into() {
@@ -200,7 +218,11 @@ pub async fn require_signature(request: Request, next: Next) -> Response {
     }
 
     // Verify Content-Digest matches the actual request body
-    if let Some(claimed) = parts.headers.get("content-digest").and_then(|v| v.to_str().ok()) {
+    if let Some(claimed) = parts
+        .headers
+        .get("content-digest")
+        .and_then(|v| v.to_str().ok())
+    {
         let actual = compute_content_digest(&body_bytes);
         if claimed != actual {
             return (
@@ -217,7 +239,130 @@ pub async fn require_signature(request: Request, next: Next) -> Response {
     tracing::info!(did = %sig.key_id, "✓ authenticated request");
 
     let mut request = Request::from_parts(parts, Body::from(body_bytes));
-    request.extensions_mut().insert(AuthenticatedDid(sig.key_id.to_string()));
+    request
+        .extensions_mut()
+        .insert(AuthenticatedDid(sig.key_id.to_string()));
+    next.run(request).await
+}
+
+/// Optional variant for rolling upgrades: verify and inject `AuthenticatedDid` when
+/// RFC 9421 signature headers are present, but allow legacy unsigned requests to
+/// continue when no signature attempt was made.
+pub async fn optional_signature(request: Request, next: Next) -> Response {
+    let has_signature_headers = request.headers().contains_key("signature-input")
+        || request.headers().contains_key("signature");
+    if has_signature_headers {
+        return require_signature(request, next).await;
+    }
+    next.run(request).await
+}
+
+/// Validate a raw UCAN token string supplied in `X-Ucan`.
+///
+/// Checks performed:
+///   1. The token decodes to a valid [`Ucan`] structure.
+///   2. The UCAN issuer (`iss`) matches `signer_did` — the DID that signed the
+///      HTTP request — preventing replay of another agent's UCAN.
+///   3. The UCAN audience (`aud`) matches `expected_aud` — the node's own DID.
+///   4. The full proof chain is cryptographically valid (signatures, expiry,
+///      not-before, chain linkage, and capability attenuation).
+fn validate_ucan_chain(
+    token: &str,
+    expected_aud: &Did,
+    signer_did: &Did,
+) -> Result<(), (StatusCode, Json<serde_json::Value>)> {
+    let ucan = Ucan::decode(token).map_err(|e| {
+        (
+            StatusCode::UNAUTHORIZED,
+            Json(json!({ "error": "invalid_ucan", "message": e.to_string() })),
+        )
+    })?;
+
+    if &ucan.payload.iss != signer_did {
+        return Err((
+            StatusCode::UNAUTHORIZED,
+            Json(json!({
+                "error": "invalid_ucan",
+                "message": format!(
+                    "UCAN issuer {} does not match request signer {}",
+                    ucan.payload.iss, signer_did
+                ),
+            })),
+        ));
+    }
+
+    ucan.verify_audience(expected_aud).map_err(|e| {
+        (
+            StatusCode::UNAUTHORIZED,
+            Json(json!({ "error": "invalid_ucan", "message": e.to_string() })),
+        )
+    })?;
+
+    ucan.verify_chain().map_err(|e| {
+        (
+            StatusCode::UNAUTHORIZED,
+            Json(json!({ "error": "invalid_ucan", "message": e.to_string() })),
+        )
+    })?;
+
+    Ok(())
+}
+
+/// Axum middleware that validates a UCAN chain when `X-Ucan` is present.
+///
+/// Must be layered so that it runs after [`require_signature`], which sets the
+/// [`AuthenticatedDid`] extension consumed here.
+///
+/// When `X-Ucan` is absent the request passes through unchanged, preserving
+/// backward compatibility for agents that pre-date UCAN delegation. When the
+/// header is present the full chain is validated: the UCAN issuer must match
+/// the HTTP Signature identity, the audience must be this node's DID, and
+/// every proof in the chain must be cryptographically sound with no capability
+/// escalation.
+pub async fn require_ucan_chain(
+    State(state): State<AppState>,
+    request: Request,
+    next: Next,
+) -> Response {
+    let token = match request
+        .headers()
+        .get("x-ucan")
+        .and_then(|v| v.to_str().ok())
+        .map(str::to_owned)
+    {
+        Some(t) => t,
+        None => return next.run(request).await,
+    };
+
+    let signer_did: Did = match request.extensions().get::<AuthenticatedDid>() {
+        Some(a) => match a.0.parse() {
+            Ok(did) => did,
+            Err(e) => {
+                tracing::warn!(raw_did = %a.0, err = %e, "failed to parse DID from authenticated identity");
+                return (
+                    StatusCode::UNAUTHORIZED,
+                    Json(json!({ "error": "invalid_identity", "message": "invalid DID in token" })),
+                )
+                    .into_response();
+            }
+        },
+        None => {
+            return (
+                StatusCode::UNAUTHORIZED,
+                Json(json!({
+                    "error": "invalid_ucan",
+                    "message": "UCAN validation requires a valid HTTP Signature",
+                })),
+            )
+                .into_response()
+        }
+    };
+
+    if let Err((status, body)) = validate_ucan_chain(&token, &state.node_did, &signer_did) {
+        return (status, body).into_response();
+    }
+
+    tracing::debug!(did = %signer_did, "UCAN chain validated");
     next.run(request).await
 }
 
@@ -239,3 +384,248 @@ fn human_detected(message: &str) -> impl IntoResponse {
         })),
     )
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use axum::{middleware, Router};
+    use gitlawb_core::identity::Keypair;
+    use gitlawb_core::ucan::{caps, Capability, Ucan};
+    use std::{path::PathBuf, sync::Arc, time::Duration};
+    use tower::ServiceExt;
+
+    fn bootstrap_ucan(node: &Keypair, agent_did: Did) -> Ucan {
+        Ucan::bootstrap(node, agent_did).unwrap()
+    }
+
+    fn delegation_ucan(agent: &Keypair, node_did: Did, proof: &Ucan) -> Ucan {
+        Ucan::delegate(
+            agent,
+            node_did,
+            vec![Capability::new("gitlawb://alpha", caps::NETWORK_JOIN)],
+            None,
+            proof,
+        )
+        .unwrap()
+    }
+
+    #[test]
+    fn validate_ucan_chain_valid() {
+        let node = Keypair::generate();
+        let agent = Keypair::generate();
+        let node_did = node.did();
+        let agent_did = agent.did();
+
+        let proof = bootstrap_ucan(&node, agent_did.clone());
+        let delegation = delegation_ucan(&agent, node_did.clone(), &proof);
+        let token = delegation.encode().unwrap();
+
+        assert!(validate_ucan_chain(&token, &node_did, &agent_did).is_ok());
+    }
+
+    #[test]
+    fn validate_ucan_chain_wrong_issuer() {
+        let node = Keypair::generate();
+        let agent = Keypair::generate();
+        let other = Keypair::generate();
+        let node_did = node.did();
+        let agent_did = agent.did();
+
+        let proof = bootstrap_ucan(&node, agent_did.clone());
+        let delegation = delegation_ucan(&agent, node_did.clone(), &proof);
+        let token = delegation.encode().unwrap();
+
+        // signer_did is `other` but UCAN iss is `agent` — must be rejected
+        let err = validate_ucan_chain(&token, &node_did, &other.did()).unwrap_err();
+        assert_eq!(err.0, StatusCode::UNAUTHORIZED);
+        let body = err.1 .0.to_string();
+        assert!(body.contains("does not match request signer"));
+    }
+
+    #[test]
+    fn validate_ucan_chain_wrong_audience() {
+        let node = Keypair::generate();
+        let agent = Keypair::generate();
+        let other_node = Keypair::generate();
+        let node_did = node.did();
+        let agent_did = agent.did();
+
+        let proof = bootstrap_ucan(&node, agent_did.clone());
+        let delegation = delegation_ucan(&agent, node_did.clone(), &proof);
+        let token = delegation.encode().unwrap();
+
+        // expected_aud is a different node — must be rejected
+        let err = validate_ucan_chain(&token, &other_node.did(), &agent_did).unwrap_err();
+        assert_eq!(err.0, StatusCode::UNAUTHORIZED);
+        let body = err.1 .0.to_string();
+        assert!(body.contains("audience mismatch"));
+    }
+
+    #[test]
+    fn validate_ucan_chain_expired_proof() {
+        let node = Keypair::generate();
+        let agent = Keypair::generate();
+        let node_did = node.did();
+        let agent_did = agent.did();
+
+        let exp = chrono::Utc::now() - chrono::Duration::hours(1);
+        let proof = Ucan::issue(
+            &node,
+            agent_did.clone(),
+            vec![Capability::new("gitlawb://alpha", caps::NETWORK_JOIN)],
+            Some(exp),
+        )
+        .unwrap();
+        let delegation = delegation_ucan(&agent, node_did.clone(), &proof);
+        let token = delegation.encode().unwrap();
+
+        let err = validate_ucan_chain(&token, &node_did, &agent_did).unwrap_err();
+        assert_eq!(err.0, StatusCode::UNAUTHORIZED);
+        let body = err.1 .0.to_string();
+        assert!(body.contains("expired"));
+    }
+
+    fn make_test_state(node_did: gitlawb_core::did::Did) -> crate::state::AppState {
+        use crate::{config::Config, graphql, rate_limit::RateLimiter};
+        use clap::Parser;
+
+        let keypair = Keypair::generate();
+        let (ref_tx, _) = tokio::sync::broadcast::channel(1);
+        let (task_tx, _) = tokio::sync::broadcast::channel(1);
+        let pool = sqlx::postgres::PgPoolOptions::new()
+            .connect_lazy("postgres://localhost/gitlawb_test_placeholder")
+            .expect("lazy pool creation should not fail");
+        let db = Arc::new(crate::db::Db::for_testing(pool.clone()));
+        let schema = Arc::new(graphql::build_schema(
+            db.clone(),
+            ref_tx.clone(),
+            task_tx.clone(),
+        ));
+        crate::state::AppState {
+            config: Arc::new(Config::parse_from(["gitlawb-node"])),
+            db,
+            node_did,
+            node_keypair: Arc::new(keypair),
+            p2p: None,
+            http_client: Arc::new(reqwest::Client::new()),
+            ref_update_tx: ref_tx,
+            task_event_tx: task_tx,
+            graphql_schema: schema,
+            machine_id: None,
+            repo_store: crate::git::repo_store::RepoStore::for_testing(PathBuf::from("/tmp"), pool),
+            rate_limiter: RateLimiter::new(100, Duration::from_secs(60)),
+            create_ip_rate_limiter: RateLimiter::new(1000, Duration::from_secs(3600)),
+            push_rate_limiter: RateLimiter::new(600, Duration::from_secs(3600)),
+            ipfs_rate_limiter: RateLimiter::new(600, Duration::from_secs(3600)),
+            ipfs_work_rate_limiter: RateLimiter::new(600, Duration::from_secs(3600)),
+            ipfs_max_history_walks: crate::api::ipfs::MAX_HISTORY_WALKS_PER_REQUEST,
+            ipfs_max_legacy_probes: crate::api::ipfs::MAX_LEGACY_PROBES_PER_REQUEST,
+            ipfs_max_served_object_bytes: crate::api::ipfs::MAX_SERVED_OBJECT_BYTES,
+            push_limiter_trust: crate::rate_limit::TrustedProxy::None,
+            sync_trigger_rate_limiter: RateLimiter::new(60, Duration::from_secs(3600)),
+            peer_write_rate_limiter: RateLimiter::new(600, Duration::from_secs(3600)),
+            shutdown_tx: tokio::sync::watch::channel(false).0,
+            git_read_semaphore: Arc::new(tokio::sync::Semaphore::new(64)),
+            git_write_semaphore: Arc::new(tokio::sync::Semaphore::new(64)),
+            git_push_advert_semaphore: Arc::new(tokio::sync::Semaphore::new(64)),
+            git_encrypt_semaphore: Arc::new(tokio::sync::Semaphore::new(64)),
+            encrypt_inflight: crate::state::EncryptInflight::new(),
+            git_read_per_caller: crate::rate_limit::PerCallerConcurrency::with_default_max_keys(16),
+            git_push_advert_per_caller:
+                crate::rate_limit::PerCallerConcurrency::with_default_max_keys(8),
+            git_write_per_caller: crate::rate_limit::PerCallerConcurrency::with_default_max_keys(8),
+            git_ipfs_walk_semaphore: Arc::new(tokio::sync::Semaphore::new(64)),
+            git_ipfs_walk_per_caller:
+                crate::rate_limit::PerCallerConcurrency::with_default_max_keys(16),
+            git_bin: "git".to_string(),
+        }
+    }
+
+    #[tokio::test]
+    async fn require_ucan_chain_no_header_passes_through() {
+        let state = make_test_state(Keypair::generate().did());
+        let app = Router::new()
+            .route("/", axum::routing::get(|| async { StatusCode::OK }))
+            .layer(middleware::from_fn_with_state(state, require_ucan_chain));
+
+        let req = Request::builder()
+            .uri("/")
+            .body(axum::body::Body::empty())
+            .unwrap();
+
+        let resp = app.oneshot(req).await.unwrap();
+        assert_eq!(resp.status(), StatusCode::OK);
+    }
+
+    #[tokio::test]
+    async fn require_ucan_chain_missing_did_returns_401() {
+        let state = make_test_state(Keypair::generate().did());
+        let app = Router::new()
+            .route("/", axum::routing::get(|| async { StatusCode::OK }))
+            .layer(middleware::from_fn_with_state(state, require_ucan_chain));
+
+        // x-ucan present but no AuthenticatedDid extension → 401
+        let req = Request::builder()
+            .uri("/")
+            .header("x-ucan", "any-token")
+            .body(axum::body::Body::empty())
+            .unwrap();
+
+        let resp = app.oneshot(req).await.unwrap();
+        assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+    }
+
+    #[tokio::test]
+    async fn require_ucan_chain_wrong_issuer_returns_401() {
+        let node = Keypair::generate();
+        let agent = Keypair::generate();
+        let other = Keypair::generate();
+        let node_did = node.did();
+        let agent_did = agent.did();
+
+        // Build a valid token where iss = agent, but supply `other` as the signer.
+        let proof = bootstrap_ucan(&node, agent_did.clone());
+        let token = delegation_ucan(&agent, node_did.clone(), &proof)
+            .encode()
+            .unwrap();
+
+        let state = make_test_state(node_did);
+        let app = Router::new()
+            .route("/", axum::routing::get(|| async { StatusCode::OK }))
+            .layer(middleware::from_fn_with_state(state, require_ucan_chain));
+
+        // AuthenticatedDid is `other`, UCAN iss is `agent` → issuer mismatch → 401
+        let req = Request::builder()
+            .uri("/")
+            .header("x-ucan", token)
+            .extension(AuthenticatedDid(other.did().to_string()))
+            .body(axum::body::Body::empty())
+            .unwrap();
+
+        let resp = app.oneshot(req).await.unwrap();
+        assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+    }
+
+    #[tokio::test]
+    async fn require_ucan_chain_malformed_token_returns_401() {
+        let state = make_test_state(Keypair::generate().did());
+        let app = Router::new()
+            .route("/", axum::routing::get(|| async { StatusCode::OK }))
+            .layer(middleware::from_fn_with_state(state, require_ucan_chain));
+
+        // Malformed x-ucan (invalid JSON)
+        let req = Request::builder()
+            .uri("/")
+            .header("x-ucan", "invalid-token-structure")
+            .extension(AuthenticatedDid(Keypair::generate().did().to_string()))
+            .body(axum::body::Body::empty())
+            .unwrap();
+
+        let resp = app.oneshot(req).await.unwrap();
+        assert_eq!(resp.status(), StatusCode::UNAUTHORIZED);
+
+        let body_bytes = axum::body::to_bytes(resp.into_body(), 2048).await.unwrap();
+        let body_json: serde_json::Value = serde_json::from_slice(&body_bytes).unwrap();
+        assert_eq!(body_json["error"], "invalid_ucan");
+    }
+}

crates/gitlawb-node/src/bootstrap.rs

@@ -0,0 +1,316 @@
+//! Embedded seed list of public Gitlawb network nodes.
+//!
+//! This module parses `bootstrap-peers.json` (embedded at compile time) and
+//! merges its contents into the runtime config so a fresh `docker compose up`
+//! joins the network without any manual peer configuration.
+//!
+//! Operators can opt out by setting `GITLAWB_BOOTSTRAP_DISABLE_SEEDS=true` in
+//! their environment — useful for isolated dev networks or testing.
+//!
+//! Add a node to the canonical list via PR to `bootstrap-peers.json`.
+
+use std::str::FromStr;
+
+use libp2p_core::Multiaddr;
+use serde::Deserialize;
+use tracing::{info, warn};
+
+use crate::config::Config;
+
+const EMBEDDED_PEERS_JSON: &str = include_str!("../../../bootstrap-peers.json");
+const SUPPORTED_VERSION: u32 = 1;
+
+#[derive(Debug, Deserialize)]
+struct BootstrapList {
+    version: u32,
+    #[serde(default)]
+    peers: Vec<BootstrapPeer>,
+}
+
+#[derive(Debug, Deserialize)]
+struct BootstrapPeer {
+    name: String,
+    #[allow(dead_code)]
+    operator: Option<String>,
+    #[allow(dead_code)]
+    did: Option<String>,
+    http_url: Option<String>,
+    p2p_multiaddr: Option<String>,
+    #[allow(dead_code)]
+    added: Option<String>,
+}
+
+/// Counts of newly-added entries returned by `merge_into_vecs`.
+#[derive(Debug, Default, PartialEq, Eq)]
+struct MergeCounts {
+    http: usize,
+    p2p: usize,
+}
+
+/// Returns true when `GITLAWB_BOOTSTRAP_DISABLE_SEEDS` is set to a truthy value.
+fn seeds_disabled() -> bool {
+    std::env::var("GITLAWB_BOOTSTRAP_DISABLE_SEEDS")
+        .ok()
+        .filter(|v| !v.is_empty() && v != "0" && !v.eq_ignore_ascii_case("false"))
+        .is_some()
+}
+
+/// Parse the seed list from a JSON string, rejecting unsupported versions.
+fn parse_seed_list(json: &str) -> Result<BootstrapList, String> {
+    let list: BootstrapList = serde_json::from_str(json).map_err(|e| e.to_string())?;
+    if list.version != SUPPORTED_VERSION {
+        return Err(format!(
+            "unsupported bootstrap-peers.json version: {} (expected {})",
+            list.version, SUPPORTED_VERSION
+        ));
+    }
+    Ok(list)
+}
+
+/// Pure merge: appends entries from `list` to the two vectors, deduping.
+/// Returns counts of entries actually added (i.e. not already present).
+fn merge_into_vecs(
+    list: BootstrapList,
+    http_peers: &mut Vec<String>,
+    p2p_bootstrap: &mut Vec<String>,
+) -> MergeCounts {
+    let mut counts = MergeCounts::default();
+
+    for peer in list.peers {
+        if let Some(url) = peer
+            .http_url
+            .as_ref()
+            .filter(|u| !u.is_empty() && !http_peers.contains(u))
+        {
+            http_peers.push(url.clone());
+            counts.http += 1;
+        }
+
+        if let Some(addr_str) = peer.p2p_multiaddr.as_ref().filter(|s| !s.is_empty()) {
+            match Multiaddr::from_str(addr_str) {
+                Ok(_) => {
+                    if !p2p_bootstrap.contains(addr_str) {
+                        p2p_bootstrap.push(addr_str.clone());
+                        counts.p2p += 1;
+                    }
+                }
+                Err(e) => warn!(
+                    name = %peer.name,
+                    addr = %addr_str,
+                    err = %e,
+                    "invalid p2p_multiaddr in bootstrap-peers.json — skipping"
+                ),
+            }
+        }
+    }
+
+    counts
+}
+
+/// Merge the embedded seed list into the runtime config.
+///
+/// - Appends any `http_url` to `config.bootstrap_peers` (used by gossip_task)
+/// - Appends any valid `p2p_multiaddr` to `config.p2p_bootstrap` (used by libp2p)
+/// - Dedupes against entries already present (env / CLI takes precedence)
+/// - No-op when `GITLAWB_BOOTSTRAP_DISABLE_SEEDS` is set to a truthy value
+pub fn merge_seeds(config: &mut Config) {
+    if seeds_disabled() {
+        info!("bootstrap seed list disabled via GITLAWB_BOOTSTRAP_DISABLE_SEEDS");
+        return;
+    }
+
+    let list = match parse_seed_list(EMBEDDED_PEERS_JSON) {
+        Ok(l) => l,
+        Err(e) => {
+            warn!(err = %e, "failed to load embedded bootstrap-peers.json — skipping");
+            return;
+        }
+    };
+
+    let counts = merge_into_vecs(list, &mut config.bootstrap_peers, &mut config.p2p_bootstrap);
+
+    if counts.http > 0 || counts.p2p > 0 {
+        info!(
+            http_peers = counts.http,
+            p2p_peers = counts.p2p,
+            "merged bootstrap seed list into config"
+        );
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn parse_valid_v1_list() {
+        let json = r#"{
+            "version": 1,
+            "updated": "2026-04-29",
+            "peers": [
+                {
+                    "name": "alpha",
+                    "operator": "Alice",
+                    "did": "did:key:z6MkAlice",
+                    "http_url": "https://alpha.example.com",
+                    "p2p_multiaddr": "/ip4/1.2.3.4/tcp/7546",
+                    "added": "2026-04-29"
+                }
+            ]
+        }"#;
+        let list = parse_seed_list(json).expect("should parse");
+        assert_eq!(list.version, 1);
+        assert_eq!(list.peers.len(), 1);
+        assert_eq!(list.peers[0].name, "alpha");
+    }
+
+    #[test]
+    fn parse_rejects_unknown_version() {
+        let json = r#"{ "version": 99, "peers": [] }"#;
+        let err = parse_seed_list(json).expect_err("should reject");
+        assert!(err.contains("unsupported"));
+    }
+
+    #[test]
+    fn parse_rejects_malformed_json() {
+        let err = parse_seed_list("{ not json").expect_err("should reject");
+        assert!(!err.is_empty());
+    }
+
+    #[test]
+    fn parse_accepts_empty_peers_array() {
+        let json = r#"{ "version": 1, "peers": [] }"#;
+        let list = parse_seed_list(json).expect("should parse");
+        assert!(list.peers.is_empty());
+    }
+
+    #[test]
+    fn parse_treats_missing_peers_as_empty() {
+        let json = r#"{ "version": 1 }"#;
+        let list = parse_seed_list(json).expect("should parse");
+        assert!(list.peers.is_empty());
+    }
+
+    #[test]
+    fn merge_appends_new_http_and_p2p() {
+        let list = parse_seed_list(
+            r#"{
+                "version": 1,
+                "peers": [
+                    {
+                        "name": "alpha",
+                        "http_url": "https://alpha.example.com",
+                        "p2p_multiaddr": "/ip4/1.2.3.4/tcp/7546"
+                    }
+                ]
+            }"#,
+        )
+        .unwrap();
+
+        let mut http = Vec::new();
+        let mut p2p = Vec::new();
+        let counts = merge_into_vecs(list, &mut http, &mut p2p);
+
+        assert_eq!(counts, MergeCounts { http: 1, p2p: 1 });
+        assert_eq!(http, vec!["https://alpha.example.com"]);
+        assert_eq!(p2p, vec!["/ip4/1.2.3.4/tcp/7546"]);
+    }
+
+    #[test]
+    fn merge_dedupes_existing_entries() {
+        let list = parse_seed_list(
+            r#"{
+                "version": 1,
+                "peers": [
+                    { "name": "alpha", "http_url": "https://alpha.example.com" }
+                ]
+            }"#,
+        )
+        .unwrap();
+
+        let mut http = vec!["https://alpha.example.com".to_string()];
+        let mut p2p = Vec::new();
+        let counts = merge_into_vecs(list, &mut http, &mut p2p);
+
+        assert_eq!(counts.http, 0, "should not double-add");
+        assert_eq!(http.len(), 1);
+    }
+
+    #[test]
+    fn merge_skips_invalid_p2p_multiaddr() {
+        let list = parse_seed_list(
+            r#"{
+                "version": 1,
+                "peers": [
+                    {
+                        "name": "bad",
+                        "http_url": "https://bad.example.com",
+                        "p2p_multiaddr": "this is not a multiaddr"
+                    }
+                ]
+            }"#,
+        )
+        .unwrap();
+
+        let mut http = Vec::new();
+        let mut p2p = Vec::new();
+        let counts = merge_into_vecs(list, &mut http, &mut p2p);
+
+        assert_eq!(counts.http, 1, "http still added");
+        assert_eq!(counts.p2p, 0, "invalid p2p skipped");
+        assert!(p2p.is_empty());
+    }
+
+    #[test]
+    fn merge_skips_empty_strings() {
+        let list = parse_seed_list(
+            r#"{
+                "version": 1,
+                "peers": [
+                    { "name": "blank", "http_url": "", "p2p_multiaddr": "" }
+                ]
+            }"#,
+        )
+        .unwrap();
+
+        let mut http = Vec::new();
+        let mut p2p = Vec::new();
+        let counts = merge_into_vecs(list, &mut http, &mut p2p);
+
+        assert_eq!(counts, MergeCounts::default());
+    }
+
+    #[test]
+    fn merge_handles_null_optional_fields() {
+        let list = parse_seed_list(
+            r#"{
+                "version": 1,
+                "peers": [
+                    {
+                        "name": "alpha",
+                        "operator": null,
+                        "did": null,
+                        "http_url": "https://alpha.example.com",
+                        "p2p_multiaddr": null,
+                        "added": null
+                    }
+                ]
+            }"#,
+        )
+        .unwrap();
+
+        let mut http = Vec::new();
+        let mut p2p = Vec::new();
+        let counts = merge_into_vecs(list, &mut http, &mut p2p);
+
+        assert_eq!(counts, MergeCounts { http: 1, p2p: 0 });
+    }
+
+    #[test]
+    fn embedded_seed_list_parses_successfully() {
+        // Regression: the canonical bootstrap-peers.json shipped in the repo
+        // must always be valid, since it's compiled into the binary.
+        parse_seed_list(EMBEDDED_PEERS_JSON)
+            .expect("embedded bootstrap-peers.json must always parse");
+    }
+}

crates/gitlawb-node/src/cert.rs

@@ -41,17 +41,18 @@ pub async fn issue_ref_certificate(
     let signature = state.node_keypair.sign_b64(&payload_bytes);
 
     let cert = RefCertificate {
-        id:         Uuid::new_v4().to_string(),
-        repo_id:    repo_id.to_string(),
-        ref_name:   ref_name.to_string(),
-        old_sha:    old_sha.to_string(),
-        new_sha:    new_sha.to_string(),
+        id: Uuid::new_v4().to_string(),
+        repo_id: repo_id.to_string(),
+        ref_name: ref_name.to_string(),
+        old_sha: old_sha.to_string(),
+        new_sha: new_sha.to_string(),
         pusher_did: pusher_did.to_string(),
         node_did,
         signature,
         issued_at,
     };
 
-    state.db.insert_ref_certificate(&cert).await?;
-    Ok(cert)
+    // Persist and return the row as it exists in the database (on a
+    // conflict the existing row survives when it is newer).
+    state.db.insert_ref_certificate(&cert).await
 }

crates/gitlawb-node/src/config.rs

@@ -1,5 +1,5 @@
-use std::path::PathBuf;
 use clap::Parser;
+use std::path::PathBuf;
 
 #[derive(Parser, Debug, Clone)]
 #[command(name = "gitlawb-node", about = "gitlawb node daemon", version)]
@@ -9,7 +9,11 @@ pub struct Config {
     pub repos_dir: PathBuf,
 
     /// PostgreSQL connection URL (Supabase or any Postgres instance)
-    #[arg(long, env = "DATABASE_URL", default_value = "postgresql://localhost/gitlawb")]
+    #[arg(
+        long,
+        env = "DATABASE_URL",
+        default_value = "postgresql://localhost/gitlawb"
+    )]
     pub database_url: String,
 
     /// Host to bind to
@@ -24,7 +28,7 @@ pub struct Config {
     #[arg(long, env = "GITLAWB_KEY", default_value = "~/.gitlawb/identity.pem")]
     pub key_path: String,
 
-    /// Allow unauthenticated reads (default: true for public repos)
+    /// Reserved for private-read mode; per-repo read enforcement is not wired in alpha
     #[arg(long, env = "GITLAWB_PUBLIC_READ", default_value_t = true)]
     pub public_read: bool,
 
@@ -36,6 +40,23 @@ pub struct Config {
     #[arg(long, env = "GITLAWB_BOOTSTRAP_PEERS", value_delimiter = ',')]
     pub bootstrap_peers: Vec<String>,
 
+    /// Require RFC 9421 signatures on peer announce/sync write routes.
+    /// Keep false during rolling upgrades so existing live nodes can still gossip.
+    #[arg(
+        long,
+        env = "GITLAWB_REQUIRE_SIGNED_PEER_WRITES",
+        default_value_t = false
+    )]
+    pub require_signed_peer_writes: bool,
+
+    /// Require the authenticated pusher to be the repo owner on `git-receive-pack`.
+    /// Authentication (a valid did:key signature) is not authorization on its own:
+    /// any party can sign as their own DID. When true, pushes whose authenticated
+    /// DID is not the repo owner are rejected. Keep false during rolling upgrades;
+    /// flip it on once owners are ready for owner-only writes.
+    #[arg(long, env = "GITLAWB_ENFORCE_OWNER_PUSH", default_value_t = false)]
+    pub enforce_owner_push: bool,
+
     /// URL of local IPFS/Kubo node HTTP API (e.g. http://127.0.0.1:5001)
     #[arg(long, env = "GITLAWB_IPFS_API", default_value = "")]
     pub ipfs_api: String,
@@ -45,15 +66,19 @@ pub struct Config {
     pub pinata_jwt: String,
 
     /// Pinata v3 upload URL
-    #[arg(long, env = "GITLAWB_PINATA_UPLOAD_URL", default_value = "https://uploads.pinata.cloud/v3/files")]
+    #[arg(
+        long,
+        env = "GITLAWB_PINATA_UPLOAD_URL",
+        default_value = "https://uploads.pinata.cloud/v3/files"
+    )]
     pub pinata_upload_url: String,
 
-    /// libp2p TCP port (0 = disabled)
+    /// libp2p QUIC/UDP port (0 = disabled)
     #[arg(long, env = "GITLAWB_P2P_PORT", default_value_t = 7546)]
     pub p2p_port: u16,
 
     /// libp2p bootstrap multiaddrs (comma-separated)
-    /// Example: /ip4/1.2.3.4/tcp/7546/p2p/12D3KooW...
+    /// Example: /ip4/1.2.3.4/udp/7546/quic-v1/p2p/12D3KooW...
     #[arg(long, env = "GITLAWB_P2P_BOOTSTRAP", value_delimiter = ',')]
     pub p2p_bootstrap: Vec<String>,
 
@@ -75,7 +100,11 @@ pub struct Config {
     pub contract_name_registry: String,
 
     /// Base L2 RPC URL
-    #[arg(long, env = "GITLAWB_CHAIN_RPC_URL", default_value = "https://sepolia.base.org")]
+    #[arg(
+        long,
+        env = "GITLAWB_CHAIN_RPC_URL",
+        default_value = "https://sepolia.base.org"
+    )]
     pub chain_rpc_url: String,
 
     /// Base L2 node staking contract address (GitlawbNodeStaking). When set
@@ -110,6 +139,314 @@ pub struct Config {
     /// Default: 2 GB.  Set lower on resource-constrained nodes.
     #[arg(long, env = "GITLAWB_MAX_PACK_BYTES", default_value_t = 2_147_483_648)]
     pub max_pack_bytes: usize,
+
+    /// Per-client-IP rate limit for `POST /api/v1/sync/trigger`, in requests per
+    /// hour. `/sync/trigger` requires a signature and drives an O(peers) outbound
+    /// fan-out per call, so it gets a tight bucket. `0` disables. Default: 60.
+    #[arg(long, env = "GITLAWB_SYNC_TRIGGER_RATE_LIMIT", default_value_t = 60)]
+    pub sync_trigger_rate_limit: usize,
+
+    /// Per-client-IP rate limit for the peer-write routes (`/peers/announce`,
+    /// `/sync/notify`), in requests per hour. These accept unsigned requests from
+    /// known peers and run at higher frequency, so the bucket is generous. Keeping
+    /// it separate from the trigger bucket stops an unsigned notify flood from
+    /// draining the signed trigger caller's quota. `0` disables. Default: 600.
+    #[arg(long, env = "GITLAWB_PEER_WRITE_RATE_LIMIT", default_value_t = 600)]
+    pub peer_write_rate_limit: usize,
+
+    /// Optional address to bind a Prometheus `/metrics` exposition endpoint on.
+    /// Example: `127.0.0.1:9091`. Leave empty (default) to disable.
+    /// Bind to localhost or a private interface — the metrics endpoint is
+    /// unauthenticated.
+    #[arg(long, env = "GITLAWB_METRICS_ADDR", default_value = "")]
+    pub metrics_addr: String,
+
+    /// Maximum time to wait for in-flight requests to drain on shutdown, in
+    /// seconds. After this elapses, the server returns 503 to anything still
+    /// in flight and exits. Default: 30s.
+    #[arg(long, env = "GITLAWB_SHUTDOWN_GRACE_SECS", default_value_t = 30)]
+    pub shutdown_grace_secs: u64,
+
+    /// Maximum wall-clock time a single served git operation (upload-pack /
+    /// receive-pack through `run_git_service`) may run before it is aborted and
+    /// its process group torn down, in seconds. Bounds a git that neither
+    /// finishes nor disconnects. Must be positive; set it very large to
+    /// effectively disable the bound. Default: 600s (10 min), generous for large
+    /// clones. Also bounds the ref advertisement (`info/refs`) and the withheld-blob
+    /// pack build (`upload_pack_excluding`'s pack-objects stage), which now share the
+    /// same timeout + process-group teardown (#174).
+    #[arg(
+        long,
+        env = "GITLAWB_GIT_SERVICE_TIMEOUT_SECS",
+        default_value_t = 600,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub git_service_timeout_secs: u64,
+
+    /// Maximum wall-clock time the storage-acquisition phase of a served git
+    /// operation may run before the request is shed with a 503, in seconds. This
+    /// bounds `RepoStore::{acquire,acquire_fresh,acquire_write}` — the Tigris
+    /// HEAD/GET on a read/advert acquire and the advisory-lock retry loop (incl. a
+    /// per-iteration `pg_try_advisory_lock` that can block on a hung Postgres pool)
+    /// on a write acquire. A concurrency permit is taken BEFORE this phase, and
+    /// `git_service_timeout_secs` only starts once git spawns, so without this the
+    /// acquire phase is unbounded: a stalled backend pins the permit and drains the
+    /// pool until every later request 503s. On expiry the permit is released and a
+    /// bounded 503 + Retry-After is returned (fail-closed). Kept separate from
+    /// `git_service_timeout_secs` because acquisition and git execution are distinct
+    /// cost centers — one shared budget would let a slow acquire starve git. Must be
+    /// positive; set it very large to effectively disable the bound. Default: 30s.
+    #[arg(
+        long,
+        env = "GITLAWB_GIT_ACQUIRE_TIMEOUT_SECS",
+        default_value_t = 30,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub git_acquire_timeout_secs: u64,
+
+    /// Maximum connections in the PostgreSQL pool. This is a cap, not a floor
+    /// (connections open lazily). Size against the database server's
+    /// max_connections, remembering admin tooling opens its own pool.
+    #[arg(
+        long,
+        env = "GITLAWB_DB_MAX_CONNECTIONS",
+        default_value_t = 20,
+        value_parser = clap::value_parser!(u32).range(1..)
+    )]
+    pub db_max_connections: u32,
+
+    /// Maximum time a request waits for a pool connection before failing with
+    /// 503, in seconds. Bounds queueing when the database is slow or down.
+    #[arg(
+        long,
+        env = "GITLAWB_DB_ACQUIRE_TIMEOUT_SECS",
+        default_value_t = 5,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub db_acquire_timeout_secs: u64,
+
+    /// Upper bound on each startup connect-and-migrate attempt, in seconds.
+    /// Migrations wait on a cross-instance advisory lock, so this must be
+    /// generous enough for a peer instance to finish migrating; on expiry the
+    /// attempt is retried (migrations are idempotent).
+    #[arg(
+        long,
+        env = "GITLAWB_DB_CONNECT_TIMEOUT_SECS",
+        default_value_t = 60,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub db_connect_timeout_secs: u64,
+
+    /// First retry delay when the database is unavailable at startup, in
+    /// seconds. Doubles each attempt up to --db-retry-max-secs.
+    #[arg(
+        long,
+        env = "GITLAWB_DB_RETRY_INITIAL_SECS",
+        default_value_t = 5,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub db_retry_initial_secs: u64,
+
+    /// Ceiling on the startup retry delay, in seconds.
+    #[arg(
+        long,
+        env = "GITLAWB_DB_RETRY_MAX_SECS",
+        default_value_t = 60,
+        value_parser = clap::value_parser!(u64).range(1..)
+    )]
+    pub db_retry_max_secs: u64,
+
+    /// Maximum number of served git operations (upload-pack / receive-pack /
+    /// info-refs) allowed to run concurrently. Beyond this the node sheds the
+    /// request with a clean 503 + Retry-After instead of spawning another git
+    /// subprocess and risking PID/thread exhaustion. Portable backstop: the
+    /// compose `pids_limit` is not present on Fly, whose connection-concurrency
+    /// cap is a different axis (500 connections each fan out to git +
+    /// pack-objects + threads). Size below the process budget with headroom.
+    ///
+    /// This is the READ pool (`git_read_semaphore`): upload-pack and the UPLOAD-PACK
+    /// `info/refs` advertisement only. The authenticated push POST draws from a
+    /// separate write pool (`max_concurrent_git_pushes`) that anonymous reads can
+    /// never reach, and each read caller is additionally bounded by
+    /// `max_concurrent_reads_per_caller`, so an anonymous flood cannot shed the actual
+    /// push nor monopolize reads (#174). The anon-reachable RECEIVE-PACK `info/refs`
+    /// advertisement draws from its OWN dedicated pool (sized like the write pool but
+    /// disjoint), so an advertisement flood can never occupy a permit the
+    /// authenticated push POST needs at admission (#174).
+    ///
+    /// A permit is held for the whole op. Every git subprocess that STREAMS is
+    /// duration-bounded and reaps its process group on disconnect: upload-pack,
+    /// receive-pack, and both info/refs advertisements run under
+    /// `git_service_timeout_secs` with `process_group(0)` teardown, and the
+    /// withheld-blob (`upload_pack_excluding`) pack-objects stage plus the push-side
+    /// candidate-discovery children (`rev-list` / `cat-file`) now run under the same
+    /// bounded runner with process-group teardown, so a stuck git child no longer
+    /// holds its slot indefinitely (#174 closed the duration/cancellation gaps this
+    /// comment previously tracked).
+    ///
+    /// Default: 128. Must be between 1 and 1_048_576; the ceiling keeps the value
+    /// well under tokio's `Semaphore` permit limit so an oversized value is a
+    /// clean CLI error rather than a boot-time panic.
+    #[arg(
+        long,
+        env = "GITLAWB_MAX_CONCURRENT_GIT_OPS",
+        default_value_t = 128,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub max_concurrent_git_ops: usize,
+
+    /// Maximum number of concurrent `git-receive-pack` (push) operations. The
+    /// authenticated push POST draws from this dedicated pool, separate from
+    /// `max_concurrent_git_ops` (reads), so a flood of anonymous reads cannot shed an
+    /// authenticated push at admission (#174). The anon-reachable receive-pack
+    /// `info/refs` advertisement runs in a SEPARATE pool of the same size (derived
+    /// from this knob), disjoint from this one, so an advertisement flood cannot
+    /// occupy a POST's slot either (#174). Beyond this a push sheds a clean 503 +
+    /// Retry-After.
+    ///
+    /// Default: 32. Must be between 1 and 1_048_576 (the ceiling keeps the value
+    /// under tokio's `Semaphore` permit limit so an oversized value is a clean CLI
+    /// error rather than a boot-time panic).
+    ///
+    /// CONNECTION BUDGET. A push holds a Postgres connection from the node's separate
+    /// advisory-lock pool for the whole receive-pack, and that pool is sized from this
+    /// knob (this value + 8, clamped to 64 in `main.rs`). The node's total ceiling is
+    /// therefore `db_max_connections` (default 20) + the lock pool (default 40), i.e.
+    /// 60 by default, and at most `db_max_connections` + 64. Size BOTH against the
+    /// database server's `max_connections`: `db_max_connections`' own doc predates the
+    /// lock pool and no longer covers most of the node's connections. The +8 headroom
+    /// is shared with the three non-push `acquire_write` callers (`api/issues.rs` x2,
+    /// `api/pulls.rs`). Raising this knob past the clamp does NOT buy more lock-pool
+    /// connections; pushes beyond it wait briefly and then shed a 503 + Retry-After.
+    #[arg(
+        long,
+        env = "GITLAWB_MAX_CONCURRENT_GIT_PUSHES",
+        default_value_t = 32,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub max_concurrent_git_pushes: usize,
+
+    /// Maximum concurrent read operations (`upload-pack` and the upload-pack
+    /// `info/refs` advertisement) a single caller may hold at once, so one caller
+    /// cannot monopolize the `max_concurrent_git_ops` read pool (#174). Callers are
+    /// keyed on the RESOLVED SOURCE IP, never the DID — a signature does not move a
+    /// caller off this cap, so an authenticated client cannot mint DIDs to escape it.
+    /// IMPORTANT: the source-IP key is only as granular as `GITLAWB_TRUSTED_PROXY`.
+    /// Left unset (the default), a node behind an edge/NAT keys all callers on the
+    /// edge IP, so this cap collapses to a single global cap rather than per-client.
+    /// Set `GITLAWB_TRUSTED_PROXY` to key on the real client; a high-fanout caller (a
+    /// CI fleet behind one NAT) then needs the operator to raise this. Over-cap for a
+    /// caller sheds a clean 503 + Retry-After.
+    ///
+    /// Default: 16. Must be between 1 and 1_048_576.
+    #[arg(
+        long,
+        env = "GITLAWB_MAX_CONCURRENT_READS_PER_CALLER",
+        default_value_t = 16,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub max_concurrent_reads_per_caller: usize,
+
+    /// Maximum number of concurrent `GET /ipfs/{cid}` requests that may run their
+    /// visibility walk at once. The publicly-reachable `/ipfs/{cid}` route runs
+    /// `allowed_blob_set_for_caller_bounded` in `spawn_blocking` — a full-history
+    /// git walk (up to `git_service_timeout_secs`) — for each candidate repo. It
+    /// draws from THIS pool, not any served-git pool: a distinct public cost center
+    /// on a distinct surface, so sharing a git pool would let anonymous /ipfs
+    /// traffic shed authenticated git ops (the auth-boundary trap). A permit is
+    /// held for the whole request (across the repo loop) so it reflects real
+    /// blocking-thread occupancy, not merely the tokio wait. Beyond this the request
+    /// sheds a clean 503 + Retry-After. Must be between 1 and 1_048_576; the ceiling
+    /// keeps the value under tokio's `Semaphore` permit limit so an oversized value
+    /// is a clean CLI error rather than a boot-time panic. Default: 32.
+    #[arg(
+        long,
+        env = "GITLAWB_MAX_CONCURRENT_IPFS_WALKS",
+        default_value_t = 32,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub max_concurrent_ipfs_walks: usize,
+
+    /// Maximum concurrent `/ipfs/{cid}` walk requests a single source may hold at
+    /// once, so one source cannot monopolize `max_concurrent_ipfs_walks` (#174).
+    /// Callers are keyed on the RESOLVED SOURCE IP (`client_key`/`GITLAWB_TRUSTED_PROXY`),
+    /// never the DID — `/ipfs` accepts any `did:key` via `optional_signature` with no
+    /// admission step, so keying on the DID would let one host mint disposable DIDs to
+    /// multiply its budget. A request with no resolvable key (no trusted header, no
+    /// peer) is bounded by the global pool only, never this sub-cap. Over-cap sheds a
+    /// clean 503 + Retry-After. Must be between 1 and 1_048_576. Default: 4.
+    #[arg(
+        long,
+        env = "GITLAWB_IPFS_WALK_PER_SOURCE",
+        default_value_t = 4,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub ipfs_walk_per_source: usize,
+
+    /// Per-request ceiling on the number of legacy (NULL-provenance) repos the
+    /// `/ipfs/{cid}` resolver's scan fallback will PROBE (`acquire` + `git cat-file
+    /// -t`) before giving up. The provenance path targets one repo; the legacy scan,
+    /// absent this bound, fans one anonymous request out to O(repos) subprocess spawns
+    /// and cold-cache fetches for a CID enumerable from the public pins index (#173,
+    /// INV-10). A truncated scan surfaces as a retryable 503, never a false 404. Wired
+    /// into `AppState::ipfs_max_legacy_probes` at construction; the history-walk ceiling
+    /// stays constant (`MAX_HISTORY_WALKS_PER_REQUEST`) and is NOT governed by this knob
+    /// (a smaller value would falsely 503 a provenanced request). Must be between 1 and
+    /// 1_048_576. Default: 256.
+    #[arg(
+        long,
+        env = "GITLAWB_IPFS_MAX_REPOS_WALKED",
+        default_value_t = crate::api::ipfs::MAX_LEGACY_PROBES_PER_REQUEST as usize,
+        value_parser = clap::builder::RangedU64ValueParser::<usize>::new().range(1..=1_048_576)
+    )]
+    pub ipfs_max_repos_walked: usize,
+
+    /// Per-client-IP rate limit for `GET /ipfs/{cid}`, in requests per hour. The
+    /// route is publicly reachable (`optional_signature`) and each request can drive
+    /// a full-history git walk, so it carries a per-IP flood brake in addition to the
+    /// concurrency cap above (a rate limit bounds request *rate*, the semaphore
+    /// bounds concurrent slow holds — different axes). Keyed on the resolved client
+    /// IP via `GITLAWB_TRUSTED_PROXY`. `0` disables. Default: 600.
+    ///
+    /// This is the pure once-per-request ROUTE brake. The resolver's internal
+    /// per-probe/per-walk WORK budget is a SEPARATE bucket whose capacity is DERIVED
+    /// from this value (`AppState::ipfs_work_budget`), not a knob of its own; `0` here
+    /// disables that derived bucket too.
+    #[arg(long, env = "GITLAWB_IPFS_RATE_LIMIT", default_value_t = 600)]
+    pub ipfs_rate_limit: usize,
+
+    /// Rows the legacy provider-CID repair sweep reads per batch (U4, #173).
+    ///
+    /// The sweep walks every `pinned_cids` row on the node once, repairing rows that
+    /// releases before this branch keyed on a PROVIDER CID (Kubo dag-pb / Pinata CIDv0)
+    /// instead of the raw-content resolver key. This bounds one batch, so the sweep can
+    /// never turn into a single unbounded table scan competing with request traffic.
+    /// Conservative on purpose: paired with the inter-batch delay below the default is
+    /// ~64 rows per minute, which finishes a large pin set in hours of idle background
+    /// work rather than one expensive burst. Must be between 1 and 100_000.
+    #[arg(
+        long,
+        env = "GITLAWB_PIN_REPAIR_SWEEP_BATCH",
+        default_value_t = 64,
+        value_parser = clap::builder::RangedU64ValueParser::<i64>::new().range(1..=100_000)
+    )]
+    pub pin_repair_sweep_batch: i64,
+
+    /// Seconds the legacy provider-CID repair sweep sleeps between batches (U4, #173).
+    ///
+    /// Each batch costs an indexed range scan plus, for the legacy rows in it, a
+    /// `git cat-file` per row. The delay is what keeps that off the DB's and the disk's
+    /// critical path: the sweep is repairing rows that have been unresolvable since the
+    /// upgrade, so finishing slowly is fine and finishing fast at the cost of live
+    /// traffic is not. `0` disables the pause (test and one-off operational use only).
+    /// Must be between 0 and 86_400.
+    #[arg(
+        long,
+        env = "GITLAWB_PIN_REPAIR_SWEEP_DELAY_SECS",
+        default_value_t = 60,
+        value_parser = clap::builder::RangedU64ValueParser::<u64>::new().range(0..=86_400)
+    )]
+    pub pin_repair_sweep_delay_secs: u64,
 }
 
 impl Config {
@@ -127,3 +464,311 @@ impl Config {
         PathBuf::from(&self.key_path)
     }
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn git_service_timeout_defaults_to_600_and_rejects_zero() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).git_service_timeout_secs,
+            600
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--git-service-timeout-secs", "30"])
+                .git_service_timeout_secs,
+            30
+        );
+        // 0 is a footgun (immediate-504 on every request); clap must reject it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--git-service-timeout-secs", "0"]).is_err()
+        );
+    }
+
+    #[test]
+    fn max_concurrent_git_ops_defaults_and_rejects_out_of_range() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).max_concurrent_git_ops,
+            128
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-git-ops", "8"])
+                .max_concurrent_git_ops,
+            8
+        );
+        // 0 permits would shed every served-git request with a 503; clap must reject it.
+        assert!(Config::try_parse_from(["gitlawb-node", "--max-concurrent-git-ops", "0"]).is_err());
+        // Above the ceiling would panic tokio's Semaphore::new at boot (permits >
+        // usize::MAX >> 3); clap must reject it as a clean CLI error instead.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-git-ops", "1048577"])
+                .is_err()
+        );
+        // The ceiling itself is accepted.
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-git-ops", "1048576"])
+                .max_concurrent_git_ops,
+            1_048_576
+        );
+    }
+
+    #[test]
+    fn max_concurrent_git_pushes_defaults_and_rejects_out_of_range() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).max_concurrent_git_pushes,
+            32
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-git-pushes", "8"])
+                .max_concurrent_git_pushes,
+            8
+        );
+        // 0 permits would shed every push with a 503; clap must reject it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-git-pushes", "0"]).is_err()
+        );
+        // Above the ceiling would panic tokio's Semaphore::new at boot; clap rejects it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-git-pushes", "1048577"])
+                .is_err()
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-git-pushes", "1048576"])
+                .max_concurrent_git_pushes,
+            1_048_576
+        );
+    }
+
+    #[test]
+    fn max_concurrent_ipfs_walks_defaults_and_rejects_out_of_range() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).max_concurrent_ipfs_walks,
+            32
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-ipfs-walks", "4"])
+                .max_concurrent_ipfs_walks,
+            4
+        );
+        // 0 permits would shed every /ipfs walk with a 503; clap must reject it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-ipfs-walks", "0"]).is_err()
+        );
+        // Above the ceiling would panic tokio's Semaphore::new at boot; clap rejects it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-ipfs-walks", "1048577"])
+                .is_err()
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-ipfs-walks", "1048576"])
+                .max_concurrent_ipfs_walks,
+            1_048_576
+        );
+    }
+
+    /// U4 (#173): the repair sweep's bounds are conservative by default and a batch of
+    /// 0 (a sweep that walks nothing and never terminates) is a CLI error, not a
+    /// runtime hang. The delay does accept 0, for tests and one-off operational runs.
+    #[test]
+    fn pin_repair_sweep_knobs_default_conservatively() {
+        let c = Config::parse_from(["gitlawb-node"]);
+        assert_eq!(c.pin_repair_sweep_batch, 64);
+        assert_eq!(c.pin_repair_sweep_delay_secs, 60);
+
+        assert!(Config::try_parse_from(["gitlawb-node", "--pin-repair-sweep-batch", "0"]).is_err());
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--pin-repair-sweep-batch", "100001"]).is_err()
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--pin-repair-sweep-batch", "8"])
+                .pin_repair_sweep_batch,
+            8
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--pin-repair-sweep-delay-secs", "0"])
+                .pin_repair_sweep_delay_secs,
+            0
+        );
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--pin-repair-sweep-delay-secs", "86401"])
+                .is_err()
+        );
+    }
+
+    #[test]
+    fn ipfs_walk_per_source_defaults_and_rejects_out_of_range() {
+        assert_eq!(Config::parse_from(["gitlawb-node"]).ipfs_walk_per_source, 4);
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--ipfs-walk-per-source", "2"])
+                .ipfs_walk_per_source,
+            2
+        );
+        // 0 would shed every /ipfs walk from a keyed source; clap must reject it.
+        assert!(Config::try_parse_from(["gitlawb-node", "--ipfs-walk-per-source", "0"]).is_err());
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--ipfs-walk-per-source", "1048577"]).is_err()
+        );
+    }
+
+    #[test]
+    fn ipfs_max_repos_walked_defaults_and_rejects_out_of_range() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).ipfs_max_repos_walked,
+            256
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--ipfs-max-repos-walked", "8"])
+                .ipfs_max_repos_walked,
+            8
+        );
+        // 0 would walk no repos (serve nothing); clap must reject it.
+        assert!(Config::try_parse_from(["gitlawb-node", "--ipfs-max-repos-walked", "0"]).is_err());
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--ipfs-max-repos-walked", "1048577"]).is_err()
+        );
+    }
+
+    /// The `GITLAWB_IPFS_MAX_REPOS_WALKED` knob must actually reach the legacy-probe
+    /// budget it advertises (R5, KTD5): production seeds `ipfs_max_legacy_probes` from
+    /// this helper, so the knob is a no-op unless the helper reflects it. RED while the
+    /// helper returns the hardcoded `MAX_LEGACY_PROBES_PER_REQUEST` (256 regardless of
+    /// the knob), GREEN once it reads the knob.
+    #[test]
+    fn ipfs_max_repos_walked_wires_the_legacy_probe_budget() {
+        use crate::state::AppState;
+        // Knob set to 1 → a one-probe legacy budget.
+        let one = Config::parse_from(["gitlawb-node", "--ipfs-max-repos-walked", "1"]);
+        assert_eq!(
+            AppState::ipfs_legacy_probe_budget(&one),
+            1,
+            "the knob must control the legacy-probe budget, not be ignored"
+        );
+        // Unset knob preserves the shipped 256-probe behaviour.
+        let default = Config::parse_from(["gitlawb-node"]);
+        assert_eq!(
+            AppState::ipfs_legacy_probe_budget(&default),
+            256,
+            "the default knob keeps the shipped 256-probe budget"
+        );
+        assert_eq!(
+            AppState::ipfs_legacy_probe_budget(&default),
+            crate::api::ipfs::MAX_LEGACY_PROBES_PER_REQUEST,
+            "the default budget equals the constant it replaced"
+        );
+        // Ceiling guard: the knob never governs the history-walk ceiling, which must
+        // stay at MAX_PIN_SOURCES + 1 or a provenanced full source set false-503s.
+        assert!(
+            crate::api::ipfs::MAX_HISTORY_WALKS_PER_REQUEST > crate::db::MAX_PIN_SOURCES as u32,
+            "the history-walk ceiling is independent of the repos-walked knob"
+        );
+    }
+
+    /// The `/ipfs` work-budget capacity is DERIVED from the route limit (R6, KTD6), with
+    /// a hard floor of one full legacy search per window (the effective
+    /// `ipfs_max_legacy_probes`). This guards the derived default so a single
+    /// default-config deep search never self-throttles mid-scan and recreates the F6
+    /// admit-then-429 for a legitimate caller. A `RateLimiter` sized to the derived
+    /// budget must admit the whole probe budget back to back.
+    #[test]
+    fn ipfs_work_budget_derives_from_route_limit_and_clears_the_probe_floor() {
+        use crate::state::AppState;
+
+        // Default config: derived work budget = max(route 600, probe budget 256) = 600,
+        // comfortably above the 256-probe floor.
+        let default = Config::parse_from(["gitlawb-node"]);
+        let budget = AppState::ipfs_work_budget(&default);
+        assert_eq!(budget, 600, "default derives max(route 600, probe 256)");
+        assert!(
+            budget >= AppState::ipfs_legacy_probe_budget(&default) as usize,
+            "the work budget must clear one full legacy search per window"
+        );
+
+        // Tight route limit (1): the floor lifts the work budget to the probe budget
+        // (256), NOT down to 1 — a single deep search still completes its full scan.
+        let tight = Config::parse_from(["gitlawb-node", "--ipfs-rate-limit", "1"]);
+        assert_eq!(
+            AppState::ipfs_work_budget(&tight),
+            256,
+            "a tight route limit is floored at the 256-probe budget, not clamped to 1"
+        );
+
+        // Raised probe budget lifts the floor with it (the work budget tracks the
+        // effective probe budget, not the constant).
+        let raised = Config::parse_from([
+            "gitlawb-node",
+            "--ipfs-rate-limit",
+            "10",
+            "--ipfs-max-repos-walked",
+            "1000",
+        ]);
+        assert_eq!(
+            AppState::ipfs_work_budget(&raised),
+            1000,
+            "the floor tracks the operator-raised legacy-probe budget"
+        );
+
+        // 0 route limit disables the derived bucket too (a 0-capacity limiter admits all).
+        let disabled = Config::parse_from(["gitlawb-node", "--ipfs-rate-limit", "0"]);
+        assert_eq!(
+            AppState::ipfs_work_budget(&disabled),
+            0,
+            "route limit 0 disables the derived work bucket alongside the route brake"
+        );
+
+        // Behavioral floor: a limiter sized to the derived (tight-route) budget admits
+        // the whole probe budget back to back for one source, then sheds the next.
+        let budget = AppState::ipfs_work_budget(&tight);
+        let limiter =
+            crate::rate_limit::RateLimiter::new(budget, std::time::Duration::from_secs(3600));
+        let rt = tokio::runtime::Builder::new_current_thread()
+            .enable_all()
+            .build()
+            .unwrap();
+        rt.block_on(async {
+            for i in 0..budget {
+                assert!(
+                    limiter.check("1.2.3.4").await,
+                    "probe {i} of one full default-config scan must be admitted (no mid-scan throttle)"
+                );
+            }
+            assert!(
+                !limiter.check("1.2.3.4").await,
+                "the probe past the derived budget is shed"
+            );
+        });
+    }
+
+    #[test]
+    fn max_concurrent_reads_per_caller_defaults_and_rejects_out_of_range() {
+        assert_eq!(
+            Config::parse_from(["gitlawb-node"]).max_concurrent_reads_per_caller,
+            16
+        );
+        assert_eq!(
+            Config::parse_from(["gitlawb-node", "--max-concurrent-reads-per-caller", "4"])
+                .max_concurrent_reads_per_caller,
+            4
+        );
+        // 0 would shed every read from a keyed caller; clap must reject it.
+        assert!(
+            Config::try_parse_from(["gitlawb-node", "--max-concurrent-reads-per-caller", "0"])
+                .is_err()
+        );
+        assert!(Config::try_parse_from([
+            "gitlawb-node",
+            "--max-concurrent-reads-per-caller",
+            "1048577"
+        ])
+        .is_err());
+        assert_eq!(
+            Config::parse_from([
+                "gitlawb-node",
+                "--max-concurrent-reads-per-caller",
+                "1048576"
+            ])
+            .max_concurrent_reads_per_caller,
+            1_048_576
+        );
+    }
+}

crates/gitlawb-node/src/encrypted_pin.rs

@@ -0,0 +1,362 @@
+//! Encrypt-then-pin for withheld blobs (Option B1). Each withheld blob is sealed
+//! to its recipient DIDs and the envelope pinned to IPFS, recorded in
+//! `encrypted_blobs`. Best-effort per blob: a failure is logged and skipped,
+//! never pinned in plaintext.
+
+use std::collections::{BTreeSet, HashMap};
+use std::path::Path;
+use std::str::FromStr;
+
+use ed25519_dalek::VerifyingKey;
+use gitlawb_core::did::Did;
+use gitlawb_core::encrypt::seal_blob;
+
+use crate::db::Db;
+
+use hmac::{Hmac, Mac};
+use sha2::Sha256;
+
+type HmacSha256 = Hmac<Sha256>;
+
+/// Opaque, node-keyed fingerprint of a blob's recipient set. Stored in place of
+/// the cleartext DID list so a DB compromise cannot reveal the reader set; used
+/// only to detect a recipient-set change so an unchanged blob is not re-sealed.
+/// Order-insensitive (the input `BTreeSet` is already sorted).
+pub fn recipients_tag(node_seed: &[u8; 32], dids: &BTreeSet<String>) -> String {
+    let mut mac = HmacSha256::new_from_slice(node_seed).expect("HMAC accepts any key length");
+    mac.update(b"gitlawb/recipients-tag/v1");
+    for did in dids {
+        mac.update(b"\n");
+        mac.update(did.as_bytes());
+    }
+    hex::encode(mac.finalize().into_bytes())
+}
+
+/// Resolve a DID string to its Ed25519 verifying key, or None if it carries no
+/// inline key (e.g. did:web / did:gitlawb).
+fn did_to_key(did: &str) -> Option<VerifyingKey> {
+    Did::from_str(did).ok()?.to_verifying_key().ok()
+}
+
+/// Resolve every recipient DID to its verifying key, all-or-nothing.
+///
+/// Returns `Ok(keys)` only when every DID resolves. If any DID fails, returns
+/// `Err(unresolved)` listing the unresolvable DID strings so the caller can fail
+/// closed rather than seal to a partial recipient set (#47): sealing to a subset
+/// while recording the full set as covered permanently locks out the dropped
+/// readers. Resolution is local-only, so `did:web`/`did:gitlawb` recipients (and
+/// any malformed `did:key`) land in the unresolved set until off-`did:key`
+/// resolution exists.
+fn resolve_all_recipients(dids: &BTreeSet<String>) -> Result<Vec<VerifyingKey>, Vec<String>> {
+    let mut keys = Vec::with_capacity(dids.len());
+    let mut unresolved = Vec::new();
+    for did in dids {
+        match did_to_key(did) {
+            Some(k) => keys.push(k),
+            None => unresolved.push(did.clone()),
+        }
+    }
+    if unresolved.is_empty() {
+        Ok(keys)
+    } else {
+        Err(unresolved)
+    }
+}
+
+/// What to do with a single withheld blob, decided without any DB or IO so the
+/// fail-closed invariant (#47) is unit-testable in isolation.
+#[derive(Debug)]
+enum SealPlan {
+    /// An existing envelope already covers exactly this recipient set; nothing to do.
+    SkipUnchanged,
+    /// No recipient DID resolved to a key, so there is nothing to seal to.
+    SkipNoRecipients,
+    /// At least one recipient DID is unresolvable. Fail closed: never seal to a
+    /// partial set. Carries the unresolvable DIDs for logging.
+    SkipUnresolvable(Vec<String>),
+    /// Seal to `keys` and record coverage under `tag`.
+    Seal {
+        keys: Vec<VerifyingKey>,
+        tag: String,
+    },
+}
+
+/// Decide what to do with one blob given its desired recipient set and the tag
+/// already stored for it (if any). Pure: no DB, no IO.
+///
+/// This is the #47 fail-closed gate in isolation: it returns `Seal` only when
+/// EVERY recipient DID resolves, so no caller can seal to a partial set. A
+/// changed recipient set (different tag) re-seals so a newly added reader can
+/// recover the blob; reader removal is not retroactive (the old envelope is
+/// already public). The comparison is on the opaque node-keyed tag, never the
+/// DID list.
+fn plan_seal(node_seed: &[u8; 32], dids: &BTreeSet<String>, stored_tag: Option<&str>) -> SealPlan {
+    let tag = recipients_tag(node_seed, dids);
+    if stored_tag == Some(tag.as_str()) {
+        return SealPlan::SkipUnchanged;
+    }
+    match resolve_all_recipients(dids) {
+        Ok(keys) if keys.is_empty() => SealPlan::SkipNoRecipients,
+        Ok(keys) => SealPlan::Seal { keys, tag },
+        Err(unresolved) => SealPlan::SkipUnresolvable(unresolved),
+    }
+}
+
+/// Encrypt and pin every withheld blob. `recipients` maps blob oid -> DID set;
+/// `node_seed` keys the opaque recipients tag. Returns `(oid, cid)` for each blob
+/// actually sealed and recorded this call (the per-push delta), used by Option B3
+/// to anchor a manifest. Recipient identities are never stored or returned.
+pub async fn encrypt_and_pin(
+    ipfs_api: &str,
+    repo_path: &Path,
+    db: &Db,
+    repo_id: &str,
+    node_seed: &[u8; 32],
+    recipients: &HashMap<String, BTreeSet<String>>,
+) -> Vec<(String, String)> {
+    let mut sealed = Vec::new();
+    let mut skipped_unresolvable = 0usize;
+    for (oid, dids) in recipients {
+        // A DB read failure is not a cache miss: re-sealing here would do an
+        // avoidable IPFS write during a partial outage. Skip and retry next push.
+        let stored_tag = match db.encrypted_blob_recipients_tag(repo_id, oid).await {
+            Ok(t) => t,
+            Err(e) => {
+                tracing::warn!(oid = %oid, err = %e, "recipients_tag lookup failed; skipping reseal");
+                continue;
+            }
+        };
+        // Fail closed: plan_seal returns Seal only when every recipient DID
+        // resolves, so we never seal to a partial set and record the full set as
+        // covered (which would permanently lock out the dropped readers, #47).
+        let (keys, tag) = match plan_seal(node_seed, dids, stored_tag.as_deref()) {
+            SealPlan::SkipUnchanged => continue,
+            SealPlan::SkipNoRecipients => {
+                tracing::warn!(oid = %oid, "no resolvable recipient keys; skipping encrypted pin");
+                continue;
+            }
+            SealPlan::SkipUnresolvable(unresolved) => {
+                skipped_unresolvable += 1;
+                // DIDs are user-controlled (rule reader_dids); log a bounded
+                // sample, not an unbounded dump. Wording stays neutral about the
+                // cause: a malformed did:key is not DHT-pending and never will
+                // resolve, unlike a did:gitlawb awaiting anchoring.
+                let sample: Vec<&String> = unresolved.iter().take(3).collect();
+                tracing::warn!(
+                    oid = %oid,
+                    unresolved_count = unresolved.len(),
+                    unresolved_sample = ?sample,
+                    "unresolvable recipient DID(s); skipping encrypted pin to avoid sealing to a partial set"
+                );
+                continue;
+            }
+            SealPlan::Seal { keys, tag } => (keys, tag),
+        };
+        let data = match crate::git::store::read_object(repo_path, oid) {
+            Ok(Some((_t, bytes))) => bytes,
+            Ok(None) => {
+                tracing::warn!(oid = %oid, "git object not found; skipping encrypted pin");
+                continue;
+            }
+            Err(e) => {
+                tracing::warn!(oid = %oid, err = %e, "read_object failed; skipping encrypted pin");
+                continue;
+            }
+        };
+        let envelope = match seal_blob(&data, &keys) {
+            Ok(e) => e,
+            Err(e) => {
+                tracing::warn!(oid = %oid, err = %e, "seal_blob failed; skipping");
+                continue;
+            }
+        };
+        let cid = match crate::ipfs_pin::pin_git_object(ipfs_api, oid, &envelope).await {
+            Ok(c) if !c.is_empty() => c,
+            Ok(_) => {
+                tracing::warn!(oid = %oid, "pin_git_object returned no cid; skipping");
+                continue;
+            }
+            Err(e) => {
+                tracing::warn!(oid = %oid, err = %e, "pin_git_object failed; skipping");
+                continue;
+            }
+        };
+        if let Err(e) = db.record_encrypted_blob(repo_id, oid, &cid, &tag).await {
+            tracing::warn!(oid = %oid, err = %e, "record_encrypted_blob failed");
+            continue;
+        }
+        sealed.push((oid.clone(), cid.clone()));
+    }
+    // One aggregate signal so a coverage collapse is a single greppable line, not
+    // a per-oid scrape. In a fully-migrated did:gitlawb org every blob skips and
+    // recovery coverage silently drops to zero; this is the operator's cue that
+    // the gap is the deliberate fail-closed posture, not a malfunction.
+    if skipped_unresolvable > 0 {
+        tracing::warn!(
+            sealed = sealed.len(),
+            skipped = skipped_unresolvable,
+            "encrypted-pin coverage reduced: blobs skipped for unresolvable recipients"
+        );
+    }
+    sealed
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use ed25519_dalek::SigningKey;
+
+    fn did_key(seed: u8) -> String {
+        let vk = SigningKey::from_bytes(&[seed; 32]).verifying_key();
+        Did::from_verifying_key(&vk).to_string()
+    }
+
+    // Accepts both `&[String]` (resolve tests, built from `did_key`) and
+    // `&[&str]` (tag tests, built from literals).
+    fn set<S: AsRef<str>>(dids: &[S]) -> BTreeSet<String> {
+        dids.iter().map(|s| s.as_ref().to_string()).collect()
+    }
+
+    #[test]
+    fn all_did_key_recipients_resolve() {
+        let dids = set(&[did_key(1), did_key(2)]);
+        let keys = resolve_all_recipients(&dids).expect("all did:key resolve");
+        assert_eq!(keys.len(), 2);
+    }
+
+    #[test]
+    fn mixed_set_with_did_gitlawb_fails_closed() {
+        // Core #47 regression: a resolvable subset must never yield a sealable
+        // key set. Two did:key plus one did:gitlawb -> Err naming only the
+        // unresolvable DID.
+        let gitlawb = Did::gitlawb("zSomeDhtKey").to_string();
+        let dids = set(&[did_key(1), did_key(2), gitlawb.clone()]);
+        let unresolved = resolve_all_recipients(&dids).expect_err("must fail closed");
+        assert_eq!(unresolved, vec![gitlawb]);
+    }
+
+    #[test]
+    fn did_web_recipient_fails_closed() {
+        let web = Did::web("example.com").to_string();
+        let dids = set(&[did_key(1), web.clone()]);
+        let unresolved = resolve_all_recipients(&dids).expect_err("did:web cannot resolve locally");
+        assert_eq!(unresolved, vec![web]);
+    }
+
+    #[test]
+    fn malformed_did_key_fails_closed() {
+        // The third state: not a method-resolution gap but a permanently broken
+        // did:key (invalid multibase). Must also fail closed.
+        let broken = "did:key:z!!!invalid".to_string();
+        let dids = set(&[did_key(1), broken.clone()]);
+        let unresolved = resolve_all_recipients(&dids).expect_err("malformed did:key fails");
+        assert_eq!(unresolved, vec![broken]);
+    }
+
+    #[test]
+    fn empty_set_resolves_to_empty_keys() {
+        let dids = BTreeSet::new();
+        let keys = resolve_all_recipients(&dids).expect("empty set is not an error");
+        assert!(keys.is_empty());
+    }
+
+    #[test]
+    fn single_unresolvable_did_returns_that_did() {
+        let gitlawb = Did::gitlawb("zOnlyOne").to_string();
+        let dids: BTreeSet<String> = [gitlawb.clone()].into_iter().collect();
+        let unresolved = resolve_all_recipients(&dids).expect_err("must fail closed");
+        assert_eq!(unresolved, vec![gitlawb]);
+    }
+
+    #[test]
+    fn tag_is_order_insensitive() {
+        let seed = [7u8; 32];
+        let a = recipients_tag(&seed, &set(&["did:key:zA", "did:key:zB"]));
+        let b = recipients_tag(&seed, &set(&["did:key:zB", "did:key:zA"]));
+        assert_eq!(a, b);
+    }
+
+    #[test]
+    fn tag_differs_for_different_sets() {
+        let seed = [7u8; 32];
+        let a = recipients_tag(&seed, &set(&["did:key:zA"]));
+        let b = recipients_tag(&seed, &set(&["did:key:zA", "did:key:zB"]));
+        assert_ne!(a, b);
+    }
+
+    #[test]
+    fn tag_is_keyed_by_node_seed() {
+        let dids = set(&["did:key:zA", "did:key:zB"]);
+        let a = recipients_tag(&[1u8; 32], &dids);
+        let b = recipients_tag(&[2u8; 32], &dids);
+        assert_ne!(
+            a, b,
+            "tag must depend on the node seed, not be a plain hash"
+        );
+    }
+
+    // plan_seal is the seal/skip decision `encrypt_and_pin` acts on. Testing it
+    // directly pins the #47 fail-closed invariant at the function that owns it,
+    // which a unit test of `resolve_all_recipients` alone cannot do (it can't
+    // catch the caller falling through to a partial seal).
+    const SEED: [u8; 32] = [9u8; 32];
+
+    #[test]
+    fn plan_seal_seals_when_all_recipients_resolve() {
+        let dids = set(&[did_key(1), did_key(2)]);
+        match plan_seal(&SEED, &dids, None) {
+            SealPlan::Seal { keys, tag } => {
+                assert_eq!(keys.len(), 2, "must seal to the full recipient set");
+                assert_eq!(
+                    tag,
+                    recipients_tag(&SEED, &dids),
+                    "records the full-set tag"
+                );
+            }
+            other => panic!("expected Seal, got {other:?}"),
+        }
+    }
+
+    #[test]
+    fn plan_seal_fails_closed_on_any_unresolvable_recipient() {
+        // The #47 invariant at the decision boundary: one unresolvable DID among
+        // resolvable ones must NOT yield a Seal (which would seal a partial set).
+        let gitlawb = Did::gitlawb("zPending").to_string();
+        let dids = set(&[did_key(1), did_key(2), gitlawb.clone()]);
+        match plan_seal(&SEED, &dids, None) {
+            SealPlan::SkipUnresolvable(unresolved) => assert_eq!(unresolved, vec![gitlawb]),
+            other => panic!("must fail closed, never seal a partial set; got {other:?}"),
+        }
+    }
+
+    #[test]
+    fn plan_seal_skips_empty_recipient_set() {
+        let dids = BTreeSet::new();
+        assert!(matches!(
+            plan_seal(&SEED, &dids, None),
+            SealPlan::SkipNoRecipients
+        ));
+    }
+
+    #[test]
+    fn plan_seal_skips_when_tag_unchanged() {
+        let dids = set(&[did_key(1)]);
+        let stored = recipients_tag(&SEED, &dids);
+        assert!(matches!(
+            plan_seal(&SEED, &dids, Some(&stored)),
+            SealPlan::SkipUnchanged
+        ));
+    }
+
+    #[test]
+    fn plan_seal_reseals_when_recipient_set_changed() {
+        // A stored tag for a DIFFERENT set is a miss: a newly added reader must
+        // trigger a re-seal, not be skipped as unchanged.
+        let dids = set(&[did_key(1), did_key(2)]);
+        let stale = recipients_tag(&SEED, &set(&[did_key(1)]));
+        match plan_seal(&SEED, &dids, Some(&stale)) {
+            SealPlan::Seal { keys, .. } => assert_eq!(keys.len(), 2),
+            other => panic!("changed recipient set must re-seal; got {other:?}"),
+        }
+    }
+}

crates/gitlawb-node/src/error.rs

@@ -23,21 +23,104 @@ pub enum AppError {
     #[allow(dead_code)]
     Forbidden(String),
 
+    #[error("icaptcha proof required: {message}")]
+    IcaptchaProofRequired {
+        message: String,
+        /// iCaptcha service base URL the client should solve against.
+        url: String,
+        /// Minimum proof level this node requires.
+        level: u32,
+    },
+
     #[error("invalid request: {0}")]
     BadRequest(String),
 
+    #[error("too many requests: {0}")]
+    TooManyRequests(String),
+
+    #[error("incomplete: {0}")]
+    Incomplete(String),
+
+    #[error("search incomplete: {0}")]
+    SearchIncomplete(String),
+
     #[error("git error: {0}")]
     Git(String),
 
+    #[error("git service timed out: {0}")]
+    Timeout(String),
+
+    #[error("server overloaded: {0}")]
+    Overloaded(String),
+
     #[error("database error: {0}")]
     Db(#[from] sqlx::Error),
 
     #[error("internal error: {0}")]
-    Internal(#[from] anyhow::Error),
+    Internal(anyhow::Error),
+}
+
+/// Shared error code/message for "the database is unreachable", also used by
+/// the degraded startup server (main.rs) and the readiness probe (server.rs)
+/// so clients see one vocabulary for the condition.
+pub const DB_UNAVAILABLE_CODE: &str = "db_unavailable";
+pub const DB_UNAVAILABLE_MESSAGE: &str = "database is temporarily unavailable";
+
+/// Connection-level sqlx failures that mean the database is unreachable right
+/// now (retryable, 503), as opposed to server-reported query errors.
+fn db_unavailable(e: &sqlx::Error) -> bool {
+    matches!(
+        e,
+        sqlx::Error::PoolTimedOut
+            | sqlx::Error::PoolClosed
+            | sqlx::Error::Io(_)
+            | sqlx::Error::Tls(_)
+    )
+}
+
+/// The db layer returns `anyhow::Result`, so sqlx errors reach handlers inside
+/// anyhow chains. Downcast them back out so the status mapping below can see
+/// them — without this, every database outage surfaces as a 500 instead of a
+/// 503. anyhow preserves downcastability through `.context()` layers.
+impl From<anyhow::Error> for AppError {
+    fn from(err: anyhow::Error) -> Self {
+        match err.downcast::<sqlx::Error>() {
+            Ok(sql) => AppError::Db(sql),
+            Err(err) => AppError::Internal(err),
+        }
+    }
 }
 
 impl IntoResponse for AppError {
     fn into_response(self) -> Response {
+        // iCaptcha challenges carry structured discovery so clients don't have to
+        // scrape the message: the service URL and required level are returned as
+        // both JSON fields and `x-icaptcha-url` / `x-icaptcha-level` headers
+        // (mirroring the header-bearing `human_detected` response in auth/mod.rs).
+        if let AppError::IcaptchaProofRequired {
+            message,
+            url,
+            level,
+        } = &self
+        {
+            use axum::http::HeaderValue;
+            let body = Json(json!({
+                "error": "icaptcha_proof_required",
+                "message": message,
+                "icaptcha_url": url,
+                "required_level": level,
+            }));
+            let mut resp = (StatusCode::FORBIDDEN, body).into_response();
+            let headers = resp.headers_mut();
+            if let Ok(v) = HeaderValue::from_str(url) {
+                headers.insert("x-icaptcha-url", v);
+            }
+            if let Ok(v) = HeaderValue::from_str(&level.to_string()) {
+                headers.insert("x-icaptcha-level", v);
+            }
+            return resp;
+        }
+
         let (status, code, message) = match &self {
             AppError::RepoNotFound(r) => (
                 StatusCode::NOT_FOUND,
@@ -49,36 +132,43 @@ impl IntoResponse for AppError {
                 "repo_exists",
                 format!("repository '{r}' already exists"),
             ),
-            AppError::NotFound(msg) => (
-                StatusCode::NOT_FOUND,
-                "not_found",
+            AppError::NotFound(msg) => (StatusCode::NOT_FOUND, "not_found", msg.clone()),
+            AppError::Unauthorized(msg) => (StatusCode::UNAUTHORIZED, "not_an_agent", msg.clone()),
+            AppError::Forbidden(msg) => (StatusCode::FORBIDDEN, "forbidden", msg.clone()),
+            // IcaptchaProofRequired is handled above (it carries extra headers/fields).
+            AppError::IcaptchaProofRequired { .. } => unreachable!("handled before this match"),
+            AppError::BadRequest(msg) => (StatusCode::BAD_REQUEST, "bad_request", msg.clone()),
+            AppError::TooManyRequests(msg) => {
+                (StatusCode::TOO_MANY_REQUESTS, "rate_limited", msg.clone())
+            }
+            AppError::Incomplete(msg) => {
+                (StatusCode::UNPROCESSABLE_ENTITY, "incomplete", msg.clone())
+            }
+            // A bounded search that could not complete (the CID resolver hit its
+            // legacy-probe or walk ceiling), distinct from the 404 that asserts a
+            // definitive not-found: absence was NOT proven, so the caller should
+            // retry rather than treat it as gone (#173, F2). 503, retryable.
+            AppError::SearchIncomplete(msg) => (
+                StatusCode::SERVICE_UNAVAILABLE,
+                "search_incomplete",
                 msg.clone(),
             ),
-            AppError::Unauthorized(msg) => (
-                StatusCode::UNAUTHORIZED,
-                "not_an_agent",
-                msg.clone(),
-            ),
-            AppError::Forbidden(msg) => (
-                StatusCode::FORBIDDEN,
-                "forbidden",
-                msg.clone(),
-            ),
-            AppError::BadRequest(msg) => (
-                StatusCode::BAD_REQUEST,
-                "bad_request",
-                msg.clone(),
-            ),
-            AppError::Git(msg) => (
-                StatusCode::INTERNAL_SERVER_ERROR,
-                "git_error",
-                msg.clone(),
-            ),
-            AppError::Db(e) => (
-                StatusCode::INTERNAL_SERVER_ERROR,
-                "db_error",
-                e.to_string(),
+            AppError::Git(msg) => (StatusCode::INTERNAL_SERVER_ERROR, "git_error", msg.clone()),
+            // 504, distinct from the 500 git_error and from the read-gate's 404 /
+            // the auth 401, so the client can tell a deadline from a failure.
+            AppError::Timeout(msg) => (StatusCode::GATEWAY_TIMEOUT, "git_timeout", msg.clone()),
+            AppError::Db(e) if db_unavailable(e) => (
+                StatusCode::SERVICE_UNAVAILABLE,
+                DB_UNAVAILABLE_CODE,
+                DB_UNAVAILABLE_MESSAGE.into(),
             ),
+            // 503 with a Retry-After (attached after this match — the shared tail
+            // can't carry per-variant headers). This is the single place Overloaded
+            // becomes a response, so it can never ship a 503 without the retry hint.
+            AppError::Overloaded(msg) => {
+                (StatusCode::SERVICE_UNAVAILABLE, "overloaded", msg.clone())
+            }
+            AppError::Db(e) => (StatusCode::INTERNAL_SERVER_ERROR, "db_error", e.to_string()),
             AppError::Internal(e) => (
                 StatusCode::INTERNAL_SERVER_ERROR,
                 "internal_error",
@@ -91,8 +181,50 @@ impl IntoResponse for AppError {
             "message": message,
         }));
 
-        (status, body).into_response()
+        let mut resp = (status, body).into_response();
+        // Both retryable 503s advertise when to retry: Overloaded (capacity shed) and
+        // SearchIncomplete (a bounded CID search cut short by a cap — retry may complete
+        // it). They ride the shared tail above for body/status, so the header is attached
+        // here rather than in bespoke early returns, keeping each variant handled once.
+        if matches!(
+            self,
+            AppError::Overloaded(_) | AppError::SearchIncomplete(_)
+        ) {
+            resp.headers_mut().insert(
+                axum::http::header::RETRY_AFTER,
+                axum::http::HeaderValue::from_static("1"),
+            );
+        }
+        resp
     }
 }
 
 pub type Result<T> = std::result::Result<T, AppError>;
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn timeout_maps_to_504_distinct_from_git_500() {
+        assert_eq!(
+            AppError::Timeout("x".into()).into_response().status(),
+            StatusCode::GATEWAY_TIMEOUT
+        );
+        // Guard against a swap with the generic git failure (500).
+        assert_eq!(
+            AppError::Git("x".into()).into_response().status(),
+            StatusCode::INTERNAL_SERVER_ERROR
+        );
+    }
+
+    #[test]
+    fn overloaded_maps_to_503_with_retry_after() {
+        let resp = AppError::Overloaded("x".into()).into_response();
+        assert_eq!(resp.status(), StatusCode::SERVICE_UNAVAILABLE);
+        assert_eq!(
+            resp.headers().get("retry-after").unwrap().to_str().unwrap(),
+            "1"
+        );
+    }
+}

crates/gitlawb-node/src/git/issues.rs

@@ -23,19 +23,26 @@ pub fn create_issue(repo_path: &Path, issue_id: &str, json: &str) -> Result<()>
 
     use std::io::Write;
     let mut child = hash_output;
-    if let Some(stdin) = child.stdin.take() {
-        let mut stdin = stdin;
-        stdin.write_all(json.as_bytes()).context("failed to write to git hash-object stdin")?;
-    }
+    // Write the blob to stdin, but always reap the child afterward even if the
+    // write fails, so a stdin-write error can't drop the Child unwaited and leak
+    // a zombie (#53).
+    let write_result = match child.stdin.take() {
+        Some(mut stdin) => stdin.write_all(json.as_bytes()),
+        None => Err(std::io::Error::new(
+            std::io::ErrorKind::BrokenPipe,
+            "git hash-object stdin unavailable",
+        )),
+    };
     let output = child.wait_with_output().context("git hash-object failed")?;
+    write_result.context("failed to write to git hash-object stdin")?;
 
     if !output.status.success() {
         let stderr = String::from_utf8_lossy(&output.stderr);
         anyhow::bail!("git hash-object failed: {stderr}");
     }
 
-    let hash = String::from_utf8(output.stdout)
-        .context("git hash-object output is not valid UTF-8")?;
+    let hash =
+        String::from_utf8(output.stdout).context("git hash-object output is not valid UTF-8")?;
     let hash = hash.trim();
 
     // Update the ref
@@ -58,7 +65,11 @@ pub fn create_issue(repo_path: &Path, issue_id: &str, json: &str) -> Result<()>
 pub fn list_issues(repo_path: &Path) -> Result<Vec<String>> {
     // List all refs under refs/gitlawb/issues/
     let list_output = Command::new("git")
-        .args(["for-each-ref", "--format=%(refname)", "refs/gitlawb/issues/"])
+        .args([
+            "for-each-ref",
+            "--format=%(refname)",
+            "refs/gitlawb/issues/",
+        ])
         .current_dir(repo_path)
         .output()
         .context("failed to run git for-each-ref")?;
@@ -121,10 +132,7 @@ pub fn resolve_issue_id(repo_path: &Path, id_or_prefix: &str) -> Result<Option<S
     }
 
     let output = String::from_utf8_lossy(&list.stdout);
-    let matches: Vec<&str> = output
-        .lines()
-        .filter(|l| !l.trim().is_empty())
-        .collect();
+    let matches: Vec<&str> = output.lines().filter(|l| !l.trim().is_empty()).collect();
 
     match matches.len() {
         0 => Ok(None),
@@ -156,8 +164,8 @@ pub fn close_issue(repo_path: &Path, issue_id: &str) -> Result<Option<String>> {
     let raw = get_issue(repo_path, &full_id)?
         .expect("ref existed in resolve but not in get — should be impossible");
 
-    let mut issue: serde_json::Value = serde_json::from_str(&raw)
-        .context("invalid issue JSON in git ref")?;
+    let mut issue: serde_json::Value =
+        serde_json::from_str(&raw).context("invalid issue JSON in git ref")?;
     issue["status"] = serde_json::Value::String("closed".to_string());
 
     let updated = serde_json::to_string(&issue).context("failed to serialize updated issue")?;
@@ -193,15 +201,6 @@ mod tests {
     use std::process::Command;
     use tempfile::TempDir;
 
-    fn init_bare_repo(dir: &TempDir) {
-        Command::new("git")
-            .args(["init", "--bare"])
-            .current_dir(dir.path())
-            .output()
-            .unwrap();
-        // git hash-object -w needs a non-bare repo; use a working repo instead
-    }
-
     fn init_repo(dir: &TempDir) {
         Command::new("git")
             .args(["init"])
@@ -225,7 +224,12 @@ mod tests {
         let dir = TempDir::new().unwrap();
         init_repo(&dir);
         let full_id = "abc12345-0000-0000-0000-000000000000";
-        create_issue(dir.path(), full_id, r#"{"id":"abc12345-0000-0000-0000-000000000000","status":"open"}"#).unwrap();
+        create_issue(
+            dir.path(),
+            full_id,
+            r#"{"id":"abc12345-0000-0000-0000-000000000000","status":"open"}"#,
+        )
+        .unwrap();
         let resolved = resolve_issue_id(dir.path(), full_id).unwrap();
         assert_eq!(resolved, Some(full_id.to_string()));
     }
@@ -235,7 +239,12 @@ mod tests {
         let dir = TempDir::new().unwrap();
         init_repo(&dir);
         let full_id = "abc12345-0000-0000-0000-000000000000";
-        create_issue(dir.path(), full_id, r#"{"id":"abc12345-0000-0000-0000-000000000000","status":"open"}"#).unwrap();
+        create_issue(
+            dir.path(),
+            full_id,
+            r#"{"id":"abc12345-0000-0000-0000-000000000000","status":"open"}"#,
+        )
+        .unwrap();
         let resolved = resolve_issue_id(dir.path(), "abc12345").unwrap();
         assert_eq!(resolved, Some(full_id.to_string()));
     }
@@ -252,8 +261,18 @@ mod tests {
     fn test_resolve_ambiguous_prefix_errors() {
         let dir = TempDir::new().unwrap();
         init_repo(&dir);
-        create_issue(dir.path(), "abc12345-aaaa-0000-0000-000000000000", r#"{"status":"open"}"#).unwrap();
-        create_issue(dir.path(), "abc12345-bbbb-0000-0000-000000000000", r#"{"status":"open"}"#).unwrap();
+        create_issue(
+            dir.path(),
+            "abc12345-aaaa-0000-0000-000000000000",
+            r#"{"status":"open"}"#,
+        )
+        .unwrap();
+        create_issue(
+            dir.path(),
+            "abc12345-bbbb-0000-0000-000000000000",
+            r#"{"status":"open"}"#,
+        )
+        .unwrap();
         let result = resolve_issue_id(dir.path(), "abc12345");
         assert!(result.is_err());
         assert!(result.unwrap_err().to_string().contains("ambiguous"));
@@ -264,7 +283,12 @@ mod tests {
         let dir = TempDir::new().unwrap();
         init_repo(&dir);
         let full_id = "def99999-0000-0000-0000-000000000000";
-        create_issue(dir.path(), full_id, r#"{"id":"def99999-0000-0000-0000-000000000000","status":"open"}"#).unwrap();
+        create_issue(
+            dir.path(),
+            full_id,
+            r#"{"id":"def99999-0000-0000-0000-000000000000","status":"open"}"#,
+        )
+        .unwrap();
 
         let updated = close_issue(dir.path(), "def99999").unwrap().unwrap();
         let v: serde_json::Value = serde_json::from_str(&updated).unwrap();

crates/gitlawb-node/src/git/mod.rs

@@ -1,5 +1,7 @@
-pub mod store;
-pub mod smart_http;
 pub mod issues;
-pub mod tigris;
+pub mod push_delta;
 pub mod repo_store;
+pub mod smart_http;
+pub mod store;
+pub mod tigris;
+pub mod visibility_pack;

crates/gitlawb-node/src/git/push_delta.rs

@@ -0,0 +1,805 @@
+//! Push-delta object enumeration for the IPFS/Pinata pin path.
+//!
+//! The pin path needs the set of git objects to consider for pinning after a
+//! push. Historically both pin functions enumerated the *whole* repo
+//! (`git cat-file --batch-all-objects`) on every push, so cost scaled with
+//! repo size rather than push size (finding N16). This module computes the
+//! per-push *delta* instead — the objects a push introduced — and keeps the
+//! whole-repo lister for the reconciliation sweep and the fail-closed fallback.
+//!
+//! ## Correctness framing (do not confuse with the #84 withholding direction)
+//!
+//! The pin enumeration is part of the *exposure* set, not the withheld filter.
+//! On the *delta* path, narrowing per push only *shrinks* what is pinned, so it
+//! cannot create an under-withholding leak — the reachable-only withheld filter
+//! (`visibility_pack`) still subtracts from the smaller set we feed it. The only
+//! risk there is *under-pinning* (a durability gap) the sweep backstops.
+//!
+//! The *full-scan* path is different: `list_all_objects` includes dangling
+//! objects the reachable withheld set never classified, so subtracting that set
+//! is not enough — a dangling private blob would slip through (#99). The caller
+//! signals a full scan via [`PinCandidateSet::full_scan`] and must then apply
+//! the fail-closed blob filter (`visibility_pack::replicable_objects_fail_closed`)
+//! instead of the plain reachable-only subtraction.
+//!
+//! Because the pin candidate set needs only the OID *set* (never the per-path
+//! information the withheld classifier needs), `git rev-list --objects
+//! --no-object-names` is safe here. The "rev-list reports one path per object"
+//! trap from #84 applies only to `visibility_pack`'s per-path `ls-tree` walk.
+
+use std::collections::HashSet;
+use std::path::{Path, PathBuf};
+use std::time::{Duration, Instant};
+
+use anyhow::Result;
+
+/// Env var that forces the push path to always full-scan, bypassing the delta
+/// optimization (KTD7 kill-switch). Reuses the already-tested fallback branch
+/// rather than introducing a second enumeration path. Does not gate the sweep.
+const FORCE_FULL_SCAN_ENV: &str = "GITLAWB_PIN_FORCE_FULLSCAN";
+
+/// The objects a push introduced, or a signal that the delta could not be
+/// computed safely and the caller should fall back to a full scan.
+///
+/// Three-valued by design: `Delta(vec![])` (a no-op push — pin nothing) is a
+/// *different* fact from `FullScanRequired` (could not compute — fall back),
+/// and they drive different actions.
+#[derive(Debug, Clone, PartialEq, Eq)]
+pub enum PinCandidates {
+    /// Objects reachable from the new tips but not the old tips.
+    Delta(Vec<String>),
+    /// The delta is not safe to use; the caller must enumerate the whole repo
+    /// with [`list_all_objects`] instead. Returned on a non-commit tip, any git
+    /// error, or the force-full-scan kill-switch.
+    FullScanRequired,
+}
+
+/// Resolve the set of objects introduced by a push from its ref updates.
+///
+/// `new_tips` / `old_tips` are the non-zero new/old SHAs of the push's ref
+/// updates (the caller strips the all-zeros create/delete sentinel). Keeping
+/// the helper on plain SHA slices (not the `api` `RefUpdate` type) keeps it
+/// unit-testable without the HTTP layer.
+///
+/// Fail-closed: any condition where the introduced set cannot be safely
+/// determined returns [`PinCandidates::FullScanRequired`] rather than a partial
+/// set, so the caller full-scans instead of silently under-pinning.
+pub fn resolve_push_delta(
+    repo_path: &Path,
+    new_tips: &[&str],
+    old_tips: &[&str],
+    git_bin: &str,
+    deadline: Instant,
+) -> PinCandidates {
+    resolve_push_delta_inner(
+        repo_path,
+        new_tips,
+        old_tips,
+        force_full_scan(),
+        git_bin,
+        deadline,
+    )
+}
+
+/// Whether the force-full-scan kill-switch env var is set.
+fn force_full_scan() -> bool {
+    std::env::var_os(FORCE_FULL_SCAN_ENV).is_some()
+}
+
+// Intentionally private but reachable from the test module (via `use super::*`)
+// so the kill-switch can be exercised without mutating process-global env.
+fn resolve_push_delta_inner(
+    repo_path: &Path,
+    new_tips: &[&str],
+    old_tips: &[&str],
+    force_full_scan: bool,
+    git_bin: &str,
+    deadline: Instant,
+) -> PinCandidates {
+    if force_full_scan {
+        tracing::debug!("{FORCE_FULL_SCAN_ENV} set — forcing full scan");
+        return PinCandidates::FullScanRequired;
+    }
+
+    // A push that only deleted refs introduces no objects.
+    if new_tips.is_empty() {
+        return PinCandidates::Delta(Vec::new());
+    }
+
+    // Ref-type guard (the fail-closed mechanism). `git rev-list` does NOT error
+    // on a non-commit tip — a blob/tree/tag-of-non-commit all exit 0 and walk
+    // the object — so the rev-list exit code cannot catch this. Check each new
+    // tip's *fully-peeled* type with `cat-file -t '<sha>^{}'` (recursive peel:
+    // tag-of-commit -> commit, tag-of-tree -> tree, tag-of-tag-of-commit ->
+    // commit). Bare `cat-file -t` returns `tag` for an annotated tag, and
+    // `for-each-ref %(*objecttype)` peels only one level — neither is correct.
+    for tip in new_tips {
+        match peeled_object_type(repo_path, tip, git_bin, deadline) {
+            Some(t) if t == "commit" => {}
+            other => {
+                tracing::debug!(
+                    tip = %tip,
+                    peeled_type = ?other,
+                    "push tip is not a commit (or type lookup failed) — forcing full scan"
+                );
+                return PinCandidates::FullScanRequired;
+            }
+        }
+    }
+
+    match rev_list_delta(repo_path, new_tips, old_tips, git_bin, deadline) {
+        Ok(oids) => PinCandidates::Delta(oids),
+        Err(e) => {
+            tracing::debug!(err = %e, "push-delta rev-list failed — forcing full scan");
+            PinCandidates::FullScanRequired
+        }
+    }
+}
+
+/// Return the fully-peeled object type of `sha` (e.g. `commit`, `tree`,
+/// `blob`), or `None` if the object is missing/unpeelable or git errored.
+fn peeled_object_type(
+    repo_path: &Path,
+    sha: &str,
+    git_bin: &str,
+    deadline: Instant,
+) -> Option<String> {
+    let peel = format!("{sha}^{{}}");
+    let out = crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &["cat-file", "-t", &peel],
+        repo_path,
+        b"",
+        deadline,
+    )
+    .ok()?;
+    Some(String::from_utf8_lossy(&out).trim().to_string())
+}
+
+/// Run `git rev-list --objects --no-object-names <new> --not <old>` and return
+/// the bare OID set. Decides on `status.success()` *before* parsing stdout, so
+/// a walk that prints a valid prefix then errors mid-walk is discarded.
+fn rev_list_delta(
+    repo_path: &Path,
+    new_tips: &[&str],
+    old_tips: &[&str],
+    git_bin: &str,
+    deadline: Instant,
+) -> Result<Vec<String>> {
+    let mut args: Vec<&str> = vec!["rev-list", "--objects", "--no-object-names"];
+    args.extend_from_slice(new_tips);
+    if !old_tips.is_empty() {
+        args.push("--not");
+        args.extend_from_slice(old_tips);
+    }
+    let out =
+        crate::git::visibility_pack::run_bounded_git(git_bin, &args, repo_path, b"", deadline)?;
+    let stdout = String::from_utf8_lossy(&out);
+    Ok(stdout
+        .lines()
+        .map(|l| l.trim().to_string())
+        .filter(|l| !l.is_empty())
+        .collect())
+}
+
+/// List every object in the repository via
+/// `git cat-file --batch-all-objects --batch-check='%(objectname)'`.
+///
+/// This is the whole-repo enumeration the push path falls back to and the
+/// reconciliation sweep relies on. It returns *all* objects (including
+/// unreachable/dangling ones), which is what the sweep needs to catch
+/// stragglers — do not swap it for a reachability walk.
+pub fn list_all_objects(repo_path: &Path, git_bin: &str, deadline: Instant) -> Result<Vec<String>> {
+    let out = crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &[
+            "cat-file",
+            "--batch-all-objects",
+            "--batch-check=%(objectname)",
+        ],
+        repo_path,
+        b"",
+        deadline,
+    )?;
+    let stdout = String::from_utf8_lossy(&out);
+    Ok(stdout
+        .lines()
+        .map(|l| l.trim().to_string())
+        .filter(|l| !l.is_empty())
+        .collect())
+}
+
+/// Like [`list_all_objects`] but pairs each OID with its object type, via
+/// `--batch-check='%(objectname) %(objecttype)'`. The pin path's fail-closed
+/// filter needs to tell blobs (content, withholdable) from commits/trees
+/// (structural, never withheld) without typing the candidate list itself.
+pub fn list_all_objects_with_type(
+    repo_path: &Path,
+    git_bin: &str,
+    deadline: Instant,
+) -> Result<Vec<(String, String)>> {
+    let out = crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &[
+            "cat-file",
+            "--batch-all-objects",
+            "--batch-check=%(objectname) %(objecttype)",
+        ],
+        repo_path,
+        b"",
+        deadline,
+    )?;
+    let stdout = String::from_utf8_lossy(&out);
+    Ok(stdout
+        .lines()
+        .filter_map(|l| {
+            let mut it = l.split_whitespace();
+            let oid = it.next()?;
+            let ty = it.next()?;
+            Some((oid.to_string(), ty.to_string()))
+        })
+        .collect())
+}
+
+/// Every blob OID in the repo, including unreachable/dangling ones. The
+/// fail-closed pin filter drops any candidate blob absent from the reachable,
+/// visibility-allowed set; a dangling private blob is in this set but not the
+/// allowed set, so it never replicates (#99).
+pub fn all_blob_oids(
+    repo_path: &Path,
+    git_bin: &str,
+    deadline: Instant,
+) -> Result<HashSet<String>> {
+    Ok(list_all_objects_with_type(repo_path, git_bin, deadline)?
+        .into_iter()
+        .filter(|(_, ty)| ty == "blob")
+        .map(|(oid, _)| oid)
+        .collect())
+}
+
+/// The pin candidate OIDs for a push plus whether they came from a full-repo
+/// scan. `full_scan` is true when the delta could not be used and the whole
+/// object DB (including dangling objects) was enumerated — the caller must then
+/// apply the fail-closed blob filter, because the reachable-only withheld set
+/// cannot classify dangling blobs (#99).
+#[derive(Debug, Clone, PartialEq, Eq)]
+pub struct PinCandidateSet {
+    pub candidates: Vec<String>,
+    pub full_scan: bool,
+}
+
+/// Resolve the pin candidate OID set for a push, off the async worker.
+///
+/// Runs [`resolve_push_delta`] in `spawn_blocking` (git subprocess) and applies
+/// the full-scan fallback for [`PinCandidates::FullScanRequired`]. Owns the
+/// dispatch so the push call site stays thin and this wiring is unit-testable
+/// without the HTTP layer.
+///
+/// Every degraded path is **logged**, not silent: a full-scan fallback, a
+/// failed full scan, and a panicked blocking task each emit a warning. On a
+/// failed full scan or a task panic the candidate set is empty (pin nothing
+/// this push); that is a durability gap the reconciliation sweep backstops, and
+/// it can never leak because the withheld/fail-closed filter still runs on
+/// whatever set is returned. `full_scan` rides on the returned set so the caller
+/// knows when the dangling-inclusive filter is required.
+pub async fn resolve_candidates_for_push(
+    repo_path: PathBuf,
+    new_tips: Vec<String>,
+    old_tips: Vec<String>,
+    git_bin: String,
+    timeout: Duration,
+) -> PinCandidateSet {
+    tokio::task::spawn_blocking(move || {
+        // ONE shared deadline for the whole scan, per jatmn ("the same deadline").
+        let deadline = Instant::now() + timeout;
+        let new_refs: Vec<&str> = new_tips.iter().map(String::as_str).collect();
+        let old_refs: Vec<&str> = old_tips.iter().map(String::as_str).collect();
+        match resolve_push_delta(&repo_path, &new_refs, &old_refs, &git_bin, deadline) {
+            PinCandidates::Delta(objs) => {
+                tracing::info!(delta = objs.len(), repo = %repo_path.display(), "pin candidate set from push delta");
+                PinCandidateSet { candidates: objs, full_scan: false }
+            }
+            PinCandidates::FullScanRequired => {
+                tracing::warn!(repo = %repo_path.display(), "pin delta unavailable (non-commit tip, git error, or force-full-scan) — full-scan fallback");
+                match list_all_objects(&repo_path, &git_bin, deadline) {
+                    Ok(objs) => PinCandidateSet { candidates: objs, full_scan: true },
+                    Err(e) => {
+                        tracing::warn!(repo = %repo_path.display(), err = %e, "full-scan fallback failed; pinning nothing this push (reconciliation sweep backstops)");
+                        PinCandidateSet { candidates: Vec::new(), full_scan: false }
+                    }
+                }
+            }
+        }
+    })
+    .await
+    .unwrap_or_else(|e| {
+        tracing::warn!(err = %e, "pin candidate computation task panicked; pinning nothing this push (reconciliation sweep backstops)");
+        PinCandidateSet { candidates: Vec::new(), full_scan: false }
+    })
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use std::collections::HashSet;
+    use std::process::Command;
+    use tempfile::TempDir;
+
+    fn td() -> std::time::Instant {
+        std::time::Instant::now() + std::time::Duration::from_secs(600)
+    }
+
+    /// Minimal git helper for building test repos.
+    struct Repo {
+        _td: TempDir,
+        path: std::path::PathBuf,
+    }
+
+    impl Repo {
+        fn new() -> Self {
+            let td = TempDir::new().unwrap();
+            let path = td.path().to_path_buf();
+            let r = Repo { _td: td, path };
+            r.git(&["init", "-q", "-b", "main"]);
+            r.git(&["config", "user.email", "t@t"]);
+            r.git(&["config", "user.name", "t"]);
+            r
+        }
+
+        fn git(&self, args: &[&str]) -> String {
+            let out = Command::new("git")
+                .args(args)
+                .current_dir(&self.path)
+                .output()
+                .unwrap();
+            assert!(
+                out.status.success(),
+                "git {args:?} failed: {}",
+                String::from_utf8_lossy(&out.stderr)
+            );
+            String::from_utf8_lossy(&out.stdout).trim().to_string()
+        }
+
+        fn commit_file(&self, name: &str, body: &str) -> String {
+            std::fs::write(self.path.join(name), body).unwrap();
+            self.git(&["add", name]);
+            self.git(&["commit", "-qm", &format!("add {name}")]);
+            self.git(&["rev-parse", "HEAD"])
+        }
+
+        fn rev(&self, r: &str) -> String {
+            self.git(&["rev-parse", r])
+        }
+    }
+
+    const ZERO: &str = "0000000000000000000000000000000000000000";
+
+    fn delta(c: PinCandidates) -> Vec<String> {
+        match c {
+            PinCandidates::Delta(v) => v,
+            PinCandidates::FullScanRequired => panic!("expected Delta, got FullScanRequired"),
+        }
+    }
+
+    #[test]
+    fn single_new_commit_delta_excludes_preexisting_objects() {
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        let c2 = repo.commit_file("b.txt", "two\n");
+        let got: HashSet<String> =
+            delta(resolve_push_delta(&repo.path, &[&c2], &[&c1], "git", td()))
+                .into_iter()
+                .collect();
+        // The new blob b.txt and commit c2 are in the delta; the old blob a.txt
+        // and commit c1 are not.
+        let new_blob = repo.rev("HEAD:b.txt");
+        let old_blob = repo.rev(&format!("{c1}:a.txt"));
+        assert!(got.contains(&c2), "new commit in delta");
+        assert!(got.contains(&new_blob), "new blob in delta");
+        assert!(!got.contains(&c1), "old commit excluded");
+        assert!(!got.contains(&old_blob), "old blob excluded");
+    }
+
+    #[test]
+    fn created_ref_is_superset_of_new_objects() {
+        // A created ref (old tip all-zeros, filtered out by caller) with no old
+        // tips walks everything reachable from the new tip — a superset of the
+        // genuinely new objects, never fewer.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        let got: HashSet<String> = delta(resolve_push_delta(&repo.path, &[&c1], &[], "git", td()))
+            .into_iter()
+            .collect();
+        assert!(got.contains(&c1));
+        assert!(got.contains(&repo.rev("HEAD:a.txt")));
+        assert!(got.contains(&repo.rev("HEAD^{tree}")));
+    }
+
+    #[test]
+    fn force_push_delta_is_objects_unique_to_new_tip() {
+        let repo = Repo::new();
+        let base = repo.commit_file("a.txt", "one\n");
+        let old_tip = repo.commit_file("b.txt", "two\n");
+        // Rewrite history: reset to base, commit a different file.
+        repo.git(&["reset", "-q", "--hard", &base]);
+        let new_tip = repo.commit_file("c.txt", "three\n");
+        let got: HashSet<String> = delta(resolve_push_delta(
+            &repo.path,
+            &[&new_tip],
+            &[&old_tip],
+            "git",
+            td(),
+        ))
+        .into_iter()
+        .collect();
+        assert!(got.contains(&new_tip), "new tip in delta");
+        assert!(got.contains(&repo.rev(&format!("{new_tip}:c.txt"))));
+        // No error; force-push computes new-minus-old cleanly.
+    }
+
+    #[test]
+    fn deleted_ref_only_yields_empty_delta_without_git() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        // All updates were deletions => new_tips empty after the caller strips zeros.
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[], &[ZERO], "git", td()),
+            PinCandidates::Delta(Vec::new())
+        );
+    }
+
+    #[test]
+    fn blob_tip_forces_full_scan() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let blob = repo.rev("HEAD:a.txt");
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[&blob], &[], "git", td()),
+            PinCandidates::FullScanRequired,
+            "a blob tip must force full scan (rev-list would exit 0 and walk it)"
+        );
+    }
+
+    #[test]
+    fn tree_tip_forces_full_scan() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let tree = repo.rev("HEAD^{tree}");
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[&tree], &[], "git", td()),
+            PinCandidates::FullScanRequired
+        );
+    }
+
+    #[test]
+    fn annotated_tag_of_tree_forces_full_scan() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let tree = repo.rev("HEAD^{tree}");
+        repo.git(&["tag", "-a", "treetag", "-m", "x", &tree]);
+        let tag = repo.rev("treetag");
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[&tag], &[], "git", td()),
+            PinCandidates::FullScanRequired,
+            "annotated tag peeling to a tree must force full scan"
+        );
+    }
+
+    #[test]
+    fn tag_of_tag_of_noncommit_forces_full_scan() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let blob = repo.rev("HEAD:a.txt");
+        repo.git(&["tag", "-a", "t1", "-m", "x", &blob]);
+        let t1 = repo.rev("t1");
+        repo.git(&["tag", "-a", "t2", "-m", "x", &t1]);
+        let t2 = repo.rev("t2");
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[&t2], &[], "git", td()),
+            PinCandidates::FullScanRequired
+        );
+    }
+
+    #[test]
+    fn annotated_tag_of_commit_proceeds_as_delta() {
+        // DISCRIMINATING positive-path regression: an annotated tag whose peeled
+        // target is a commit must return Delta, not FullScanRequired. A
+        // FullScanRequired here means the guard used bare `cat-file -t` (returns
+        // `tag`) instead of the `^{}` peel.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        repo.git(&["tag", "-a", "rel", "-m", "release", &c1]);
+        let tag = repo.rev("rel");
+        let got: HashSet<String> = delta(resolve_push_delta(&repo.path, &[&tag], &[], "git", td()))
+            .into_iter()
+            .collect();
+        assert!(
+            got.contains(&c1),
+            "peeled commit's objects are in the delta"
+        );
+    }
+
+    #[test]
+    fn tag_of_tag_of_commit_proceeds_as_delta() {
+        // Deep-peel positive path: tag -> tag -> commit must recurse to `commit`
+        // via `^{}` and return Delta. Complements tag_of_tag_of_noncommit (which
+        // forces full scan) — guards against a regression in peel depth that
+        // would silently downgrade a legitimate nested-tag push to full scan.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        repo.git(&["tag", "-a", "t1", "-m", "x", &c1]);
+        let t1 = repo.rev("t1");
+        repo.git(&["tag", "-a", "t2", "-m", "x", &t1]);
+        let t2 = repo.rev("t2");
+        let got: HashSet<String> = delta(resolve_push_delta(&repo.path, &[&t2], &[], "git", td()))
+            .into_iter()
+            .collect();
+        assert!(
+            got.contains(&c1),
+            "peeled commit's objects are in the delta"
+        );
+    }
+
+    #[tokio::test]
+    async fn resolve_candidates_for_push_returns_delta() {
+        // The extracted wiring returns the per-push delta on the happy path.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        let c2 = repo.commit_file("b.txt", "two\n");
+        let set = resolve_candidates_for_push(
+            repo.path.clone(),
+            vec![c2.clone()],
+            vec![c1.clone()],
+            "git".to_string(),
+            std::time::Duration::from_secs(600),
+        )
+        .await;
+        assert!(!set.full_scan, "happy-path delta is not a full scan");
+        let got: HashSet<String> = set.candidates.into_iter().collect();
+        let new_blob = repo.rev("HEAD:b.txt");
+        assert!(
+            got.contains(&c2) && got.contains(&new_blob),
+            "new objects pinned"
+        );
+        assert!(!got.contains(&c1), "old commit excluded from delta");
+    }
+
+    #[tokio::test]
+    async fn resolve_candidates_for_push_falls_back_to_full_scan_on_noncommit_tip() {
+        // A non-commit tip forces FullScanRequired, and the wiring resolves that
+        // to the whole-repo list (a superset), never an empty set.
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let blob = repo.rev("HEAD:a.txt");
+        let all: HashSet<String> = list_all_objects(&repo.path, "git", td())
+            .unwrap()
+            .into_iter()
+            .collect();
+        let set = resolve_candidates_for_push(
+            repo.path.clone(),
+            vec![blob],
+            vec![],
+            "git".to_string(),
+            std::time::Duration::from_secs(600),
+        )
+        .await;
+        assert!(set.full_scan, "non-commit tip is signalled as a full scan");
+        let got: HashSet<String> = set.candidates.into_iter().collect();
+        assert_eq!(got, all, "non-commit tip falls back to full repo scan");
+    }
+
+    #[test]
+    fn missing_oid_tip_forces_full_scan() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        let bogus = "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef";
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[bogus], &[], "git", td()),
+            PinCandidates::FullScanRequired,
+            "a missing/corrupt tip OID must force full scan"
+        );
+    }
+
+    #[test]
+    fn present_noncommit_old_tip_is_safe() {
+        // A present-but-non-commit old_sha (a --not arg) must not under-pin:
+        // either rev-list errors (FullScanRequired) or it over-lists (Delta).
+        // Either way the new tip's objects are covered; never fewer.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        let c2 = repo.commit_file("b.txt", "two\n");
+        let old_tree = repo.rev(&format!("{c1}^{{tree}}"));
+        let result = resolve_push_delta(&repo.path, &[&c2], &[&old_tree], "git", td());
+        match result {
+            PinCandidates::FullScanRequired => {} // safe: caller full-scans
+            PinCandidates::Delta(objs) => {
+                // Safe direction: must still contain the new commit (over-list ok).
+                assert!(objs.contains(&c2), "new tip objects must be covered");
+            }
+        }
+    }
+
+    #[test]
+    fn multi_ref_push_unions_ranges() {
+        let repo = Repo::new();
+        let base = repo.commit_file("a.txt", "one\n");
+        // branch1 advances
+        let b1 = repo.commit_file("b.txt", "two\n");
+        // branch2 from base advances independently
+        repo.git(&["checkout", "-q", "-b", "branch2", &base]);
+        let b2 = repo.commit_file("c.txt", "three\n");
+        let got: HashSet<String> = delta(resolve_push_delta(
+            &repo.path,
+            &[&b1, &b2],
+            &[&base, &base],
+            "git",
+            td(),
+        ))
+        .into_iter()
+        .collect();
+        assert!(got.contains(&b1), "branch1 new commit");
+        assert!(got.contains(&b2), "branch2 new commit");
+    }
+
+    #[test]
+    fn empty_repo_no_tips_yields_empty_delta() {
+        let repo = Repo::new();
+        assert_eq!(
+            resolve_push_delta(&repo.path, &[], &[], "git", td()),
+            PinCandidates::Delta(Vec::new())
+        );
+    }
+
+    #[test]
+    fn force_full_scan_flag_overrides() {
+        // Test the kill-switch via the pure inner fn so we never touch
+        // process-global env (which would race with parallel tests, and is
+        // unsafe in Rust 2024). The public resolve_push_delta wires the env
+        // read into this same flag.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        assert_eq!(
+            resolve_push_delta_inner(&repo.path, &[&c1], &[], true, "git", td()),
+            PinCandidates::FullScanRequired
+        );
+        // And with the flag off, the same push yields a Delta.
+        assert!(matches!(
+            resolve_push_delta_inner(&repo.path, &[&c1], &[], false, "git", td()),
+            PinCandidates::Delta(_)
+        ));
+    }
+
+    #[test]
+    fn list_all_objects_returns_full_repo() {
+        let repo = Repo::new();
+        repo.commit_file("a.txt", "one\n");
+        repo.commit_file("b.txt", "two\n");
+        let all = list_all_objects(&repo.path, "git", td()).unwrap();
+        // 2 commits + 2 trees + 2 blobs = 6 objects.
+        assert_eq!(all.len(), 6, "got: {all:?}");
+    }
+
+    #[test]
+    fn all_blob_oids_includes_dangling_and_excludes_nonblobs() {
+        // The all-blob universe must include a dangling blob (the #99 hazard) and
+        // exclude commits/trees, so the fail-closed filter can tell a blob from a
+        // structural object without typing the candidate list.
+        let repo = Repo::new();
+        let c1 = repo.commit_file("a.txt", "one\n");
+        let reachable_blob = repo.rev("HEAD:a.txt");
+        let tree = repo.rev("HEAD^{tree}");
+        // Write a blob referenced by no tree/commit — dangling.
+        std::fs::write(repo.path.join("orphan.bin"), b"dangling\n").unwrap();
+        let dangling = repo.git(&["hash-object", "-w", "orphan.bin"]);
+
+        let blobs = all_blob_oids(&repo.path, "git", td()).unwrap();
+        assert!(blobs.contains(&reachable_blob), "reachable blob present");
+        assert!(
+            blobs.contains(&dangling),
+            "dangling blob present in the all-blob universe"
+        );
+        assert!(!blobs.contains(&c1), "commit is not a blob");
+        assert!(!blobs.contains(&tree), "tree is not a blob");
+
+        // The typed lister tags each object; spot-check the dangling blob's type.
+        let typed = list_all_objects_with_type(&repo.path, "git", td()).unwrap();
+        assert!(
+            typed
+                .iter()
+                .any(|(oid, ty)| oid == &dangling && ty == "blob"),
+            "dangling object is typed as a blob"
+        );
+    }
+
+    #[cfg(unix)]
+    #[test]
+    fn list_all_objects_times_out_on_a_hung_git_instead_of_blocking() {
+        use std::os::unix::fs::PermissionsExt;
+        use std::time::{Duration, Instant};
+        let dir = tempfile::TempDir::new().unwrap();
+        // Fake git: hang on cat-file (bounded to 30s so a broken test can't wedge).
+        let fake = dir.path().join("fakegit");
+        std::fs::write(
+            &fake,
+            "#!/bin/sh\ncase \"$1\" in\n  cat-file) i=0; while [ $i -lt 30 ]; do sleep 1; i=$((i+1)); done ;;\n  *) : ;;\nesac\n",
+        )
+        .unwrap();
+        let mut perm = std::fs::metadata(&fake).unwrap().permissions();
+        perm.set_mode(0o755);
+        std::fs::set_permissions(&fake, perm).unwrap();
+        let git_bin = fake.to_str().unwrap().to_string();
+
+        let (tx, rx) = std::sync::mpsc::channel();
+        let path = dir.path().to_path_buf();
+        std::thread::spawn(move || {
+            let _ = tx.send(list_all_objects(
+                &path,
+                &git_bin,
+                Instant::now() + Duration::from_millis(150),
+            ));
+        });
+        let res = rx.recv_timeout(Duration::from_secs(10)).expect(
+            "list_all_objects must return within the watchdog budget, not block on a hung git",
+        );
+        assert!(
+            res.is_err(),
+            "a hung git must make list_all_objects error out, not hang"
+        );
+    }
+
+    /// #174 finding 2: the DELTA-path children — `peeled_object_type` (cat-file),
+    /// `rev_list_delta` (rev-list) — and `list_all_objects_with_type` (cat-file) are
+    /// the remaining candidate-discovery execs (the common push path). Each must
+    /// return within the watchdog budget on a hung git rather than block and pin the
+    /// write permit. Revert any one to a bare `Command::output()` and its arm blocks
+    /// past the recv budget (RED).
+    #[cfg(unix)]
+    #[test]
+    fn delta_path_exec_fns_time_out_on_a_hung_git() {
+        use std::os::unix::fs::PermissionsExt;
+        use std::time::{Duration, Instant};
+        let dir = tempfile::TempDir::new().unwrap();
+        // Fake git hangs on BOTH cat-file and rev-list (bounded 30s so a broken
+        // test can't leak a permanent orphan or wedge the suite).
+        let fake = dir.path().join("fakegit");
+        std::fs::write(
+            &fake,
+            "#!/bin/sh\ncase \"$1\" in\n  cat-file|rev-list) i=0; while [ $i -lt 30 ]; do sleep 1; i=$((i+1)); done ;;\n  *) : ;;\nesac\n",
+        )
+        .unwrap();
+        let mut perm = std::fs::metadata(&fake).unwrap().permissions();
+        perm.set_mode(0o755);
+        std::fs::set_permissions(&fake, perm).unwrap();
+        let git_bin = fake.to_str().unwrap().to_string();
+        let path = dir.path().to_path_buf();
+
+        // Run `f` on a thread and require it to RETURN (not block) within 10s.
+        fn returns_within<T: Send + 'static>(f: impl FnOnce() -> T + Send + 'static) -> T {
+            let (tx, rx) = std::sync::mpsc::channel();
+            std::thread::spawn(move || {
+                let _ = tx.send(f());
+            });
+            rx.recv_timeout(Duration::from_secs(10)).expect(
+                "a delta-path exec fn must return within the watchdog budget, not block on a hung git",
+            )
+        }
+        let dl = || Instant::now() + Duration::from_millis(150);
+        let sha = "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef";
+
+        let (p, g, d) = (path.clone(), git_bin.clone(), dl());
+        assert!(
+            returns_within(move || peeled_object_type(&p, sha, &g, d)).is_none(),
+            "peeled_object_type must time out to None on a hung cat-file"
+        );
+        let (p, g, d) = (path.clone(), git_bin.clone(), dl());
+        assert!(
+            returns_within(move || rev_list_delta(&p, &[sha], &[], &g, d)).is_err(),
+            "rev_list_delta must error out on a hung rev-list"
+        );
+        let (p, g, d) = (path.clone(), git_bin.clone(), dl());
+        assert!(
+            returns_within(move || list_all_objects_with_type(&p, &g, d)).is_err(),
+            "list_all_objects_with_type must error out on a hung cat-file"
+        );
+    }
+}

crates/gitlawb-node/src/git/store.rs

@@ -1,6 +1,6 @@
+use anyhow::{bail, Context, Result};
 use std::path::{Path, PathBuf};
 use std::process::Command;
-use anyhow::{Result, Context, bail};
 
 /// Initialize a new bare git repository with SHA-1 object format (default).
 ///
@@ -107,7 +107,8 @@ pub fn resolve_head(repo_path: &Path, preferred_branch: &str) -> String {
 
     // 3. Walk all refs — prefer main/master, then take the first one
     if let Ok(refs) = list_refs(repo_path) {
-        let branches: Vec<_> = refs.iter()
+        let branches: Vec<_> = refs
+            .iter()
             .filter(|(r, _)| r.starts_with("refs/heads/"))
             .collect();
         // Preferred names in order
@@ -199,7 +200,13 @@ pub fn ls_tree(repo_path: &Path, refname: &str, tree_path: &str) -> Result<Vec<T
             let kind = parts.next()?.to_string();
             let hash = parts.next()?.to_string();
             let size: Option<u64> = parts.next().and_then(|s| s.parse().ok());
-            Some(TreeEntry { mode, kind, hash, path: name.to_string(), size })
+            Some(TreeEntry {
+                mode,
+                kind,
+                hash,
+                path: name.to_string(),
+                size,
+            })
         })
         .collect();
 
@@ -239,7 +246,9 @@ pub struct CommitInfo {
 
 fn serialize_timestamp<S: serde::Serializer>(ts: &i64, s: S) -> Result<S::Ok, S::Error> {
     use chrono::TimeZone;
-    let dt = chrono::Utc.timestamp_opt(*ts, 0).single()
+    let dt = chrono::Utc
+        .timestamp_opt(*ts, 0)
+        .single()
         .unwrap_or_else(chrono::Utc::now);
     s.serialize_str(&dt.to_rfc3339())
 }
@@ -262,9 +271,8 @@ pub struct TreeEntry {
 /// `/ipfs/<cid>` is computed from these same content bytes via
 /// `gitlawb_core::cid::Cid::from_git_object_bytes`.
 ///
-/// Returns `None` if the object does not exist in this repo.
-pub fn read_object(repo_path: &Path, sha256_hex: &str) -> Result<Option<(String, Vec<u8>)>> {
-    // First check if the object exists and get its type
+/// Get just the object type. Returns `None` if the object doesn't exist.
+pub fn object_type(repo_path: &Path, sha256_hex: &str) -> Result<Option<String>> {
     let type_output = Command::new("git")
         .args(["cat-file", "-t", sha256_hex])
         .current_dir(repo_path)
@@ -275,11 +283,17 @@ pub fn read_object(repo_path: &Path, sha256_hex: &str) -> Result<Option<(String,
         return Ok(None);
     }
 
-    let obj_type = String::from_utf8_lossy(&type_output.stdout).trim().to_string();
+    Ok(Some(
+        String::from_utf8_lossy(&type_output.stdout)
+            .trim()
+            .to_string(),
+    ))
+}
 
-    // Read the raw content bytes
+/// Read an object's content if its type is already known.
+pub fn read_object_content(repo_path: &Path, sha256_hex: &str, obj_type: &str) -> Result<Vec<u8>> {
     let content_output = Command::new("git")
-        .args(["cat-file", &obj_type, sha256_hex])
+        .args(["cat-file", obj_type, sha256_hex])
         .current_dir(repo_path)
         .output()
         .context("failed to run git cat-file <type>")?;
@@ -289,7 +303,144 @@ pub fn read_object(repo_path: &Path, sha256_hex: &str) -> Result<Option<(String,
         bail!("git cat-file failed: {stderr}");
     }
 
-    Ok(Some((obj_type, content_output.stdout)))
+    Ok(content_output.stdout)
+}
+
+/// Bounded twin of [`object_type`] for the `GET /ipfs/{cid}` serve path (#173
+/// round-10, R1/KTD2). Runs `git cat-file -t` under
+/// [`run_bounded_git`](crate::git::visibility_pack::run_bounded_git) so the child runs
+/// in its own process group and a watchdog reaps it (SIGTERM -> grace -> SIGKILL) at
+/// `timeout`. The bare [`object_type`] is a `spawn_blocking` `Command::output` that an
+/// async timeout cannot cancel, so a wedged `cat-file` there pins the caller's held
+/// /ipfs walk admission for the whole hang; this twin cannot. Semantics mirror
+/// [`object_type`]: `Ok(Some(t))` for an existing object, `Ok(None)` when git exits
+/// non-zero without timing out (the object is absent), and
+/// `Err(`[`GitServiceTimeout`](crate::git::smart_http::GitServiceTimeout)`)` on the
+/// deadline so the handler can mark the search truncated (retryable 503) rather than a
+/// false not-found. Callers off the /ipfs path keep the bare helper.
+pub fn object_type_bounded(
+    git_bin: &str,
+    repo_path: &Path,
+    sha256_hex: &str,
+    timeout: std::time::Duration,
+) -> Result<Option<String>> {
+    let deadline = std::time::Instant::now() + timeout;
+    match crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &["cat-file", "-t", sha256_hex],
+        repo_path,
+        b"",
+        deadline,
+    ) {
+        Ok(out) => Ok(Some(String::from_utf8_lossy(&out).trim().to_string())),
+        Err(e) if e.is::<crate::git::smart_http::GitServiceTimeout>() => Err(e),
+        // A non-timeout failure is git reporting no such object (a non-zero exit),
+        // matching `object_type`'s `Ok(None)`.
+        Err(_) => Ok(None),
+    }
+}
+
+/// Bounded `git cat-file -s` size read for the `GET /ipfs/{cid}` serve path (#173
+/// round-10, R1/KTD2): reads the object size WITHOUT its content (so an oversized object
+/// is rejected before it is buffered, #173 F6), under
+/// [`run_bounded_git`](crate::git::visibility_pack::run_bounded_git) so a wedged size
+/// read is reaped at `timeout` instead of pinning the held /ipfs walk admission.
+/// `Ok(Some(n))` on success, `Ok(None)` when the object is absent (a non-timeout
+/// non-zero exit), `Err(GitServiceTimeout)` on the deadline.
+pub fn object_size_bounded(
+    git_bin: &str,
+    repo_path: &Path,
+    sha256_hex: &str,
+    timeout: std::time::Duration,
+) -> Result<Option<u64>> {
+    let deadline = std::time::Instant::now() + timeout;
+    match crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &["cat-file", "-s", sha256_hex],
+        repo_path,
+        b"",
+        deadline,
+    ) {
+        Ok(out) => Ok(String::from_utf8_lossy(&out).trim().parse::<u64>().ok()),
+        Err(e) if e.is::<crate::git::smart_http::GitServiceTimeout>() => Err(e),
+        Err(_) => Ok(None),
+    }
+}
+
+/// Bounded twin of [`read_object_content`] for the `GET /ipfs/{cid}` serve path (#173
+/// round-10, R1/KTD2): `git cat-file <type>` under
+/// [`run_bounded_git`](crate::git::visibility_pack::run_bounded_git) so a wedged content
+/// read is reaped at `timeout` instead of pinning the held /ipfs walk admission. Returns
+/// the raw object bytes on success and an error (including `GitServiceTimeout` on the
+/// deadline) otherwise, mirroring [`read_object_content`].
+pub fn read_object_content_bounded(
+    git_bin: &str,
+    repo_path: &Path,
+    sha256_hex: &str,
+    obj_type: &str,
+    timeout: std::time::Duration,
+) -> Result<Vec<u8>> {
+    let deadline = std::time::Instant::now() + timeout;
+    crate::git::visibility_pack::run_bounded_git(
+        git_bin,
+        &["cat-file", obj_type, sha256_hex],
+        repo_path,
+        b"",
+        deadline,
+    )
+}
+
+/// Read a git object by its SHA-256 hex object ID.
+///
+/// Returns `(object_type, content_bytes)` where `content_bytes` is the raw
+/// object content (without the git framing header). The CID served over
+/// `/ipfs/<cid>` is computed from these same content bytes via
+/// `gitlawb_core::cid::Cid::from_git_object_bytes`.
+///
+/// Returns `None` if the object does not exist in this repo.
+pub fn read_object(repo_path: &Path, sha256_hex: &str) -> Result<Option<(String, Vec<u8>)>> {
+    let obj_type = match object_type(repo_path, sha256_hex)? {
+        Some(t) => t,
+        None => return Ok(None),
+    };
+    let content = read_object_content(repo_path, sha256_hex, &obj_type)?;
+    Ok(Some((obj_type, content)))
+}
+
+/// Bounded twin of [`read_object`] for write-side callers that must not hang on a
+/// wedged `git cat-file` (the post-push pin path, #173): composes
+/// [`object_type_bounded`] and [`read_object_content_bounded`] under ONE shared
+/// deadline (mirroring `get_by_cid`'s read stage and `build_filtered_pack`), so a
+/// single object read holds for at most `timeout` total, not one full timeout per
+/// stage. `Ok(Some((type, bytes)))` on success, `Ok(None)` when the object is absent,
+/// and `Err(`[`GitServiceTimeout`](crate::git::smart_http::GitServiceTimeout)`)` when
+/// either stage overruns the deadline. The bare [`read_object`] is an unbounded
+/// `Command::output` an async timeout cannot cancel, so a wedged `cat-file` there pins
+/// the post-push coalescing key until process death; this twin cannot.
+pub fn read_object_bounded(
+    git_bin: &str,
+    repo_path: &Path,
+    sha256_hex: &str,
+    timeout: std::time::Duration,
+) -> Result<Option<(String, Vec<u8>)>> {
+    let deadline = std::time::Instant::now() + timeout;
+    let obj_type = match object_type_bounded(
+        git_bin,
+        repo_path,
+        sha256_hex,
+        deadline.saturating_duration_since(std::time::Instant::now()),
+    )? {
+        Some(t) => t,
+        None => return Ok(None),
+    };
+    let content = read_object_content_bounded(
+        git_bin,
+        repo_path,
+        sha256_hex,
+        &obj_type,
+        deadline.saturating_duration_since(std::time::Instant::now()),
+    )?;
+    Ok(Some((obj_type, content)))
 }
 
 /// Get the diff between two branches: changes on source_branch not in target_branch.
@@ -303,9 +454,48 @@ pub fn branch_diff(repo_path: &Path, target_branch: &str, source_branch: &str) -
     Ok(String::from_utf8_lossy(&output.stdout).to_string())
 }
 
+/// The repo-relative paths changed by `git diff target...source` (the same range
+/// as `branch_diff`). Used to enforce per-path visibility on a PR diff: if the
+/// caller cannot read one of these paths, the diff is withheld.
+pub fn branch_diff_names(
+    repo_path: &Path,
+    target_branch: &str,
+    source_branch: &str,
+) -> Result<Vec<String>> {
+    let output = Command::new("git")
+        .args([
+            "diff",
+            "--name-only",
+            "-z",
+            &format!("{target_branch}...{source_branch}"),
+        ])
+        .current_dir(repo_path)
+        .output()
+        .context("failed to run git diff --name-only")?;
+    if !output.status.success() {
+        let stderr = String::from_utf8_lossy(&output.stderr);
+        bail!("git diff --name-only failed: {stderr}");
+    }
+    // Split on NUL (`-z`) so paths containing newlines keep their exact bytes;
+    // `--name-only` without `-z` would quote/escape such paths and they would no
+    // longer match the visibility globs in get_pr_diff, leaking the diff.
+    Ok(output
+        .stdout
+        .split(|b| *b == b'\0')
+        .filter(|s| !s.is_empty())
+        .map(|s| String::from_utf8_lossy(s).into_owned())
+        .collect())
+}
+
 /// Merge source_branch into target_branch in a bare repo using a temporary worktree.
 /// Returns the new merge commit hash.
-pub fn merge_branch(repo_path: &Path, target_branch: &str, source_branch: &str, author_did: &str, pr_title: &str) -> Result<String> {
+pub fn merge_branch(
+    repo_path: &Path,
+    target_branch: &str,
+    source_branch: &str,
+    author_did: &str,
+    pr_title: &str,
+) -> Result<String> {
     let worktree_path = repo_path.join("_merge_worktree");
 
     // Clean up any leftover worktree
@@ -324,13 +514,24 @@ pub fn merge_branch(repo_path: &Path, target_branch: &str, source_branch: &str,
         .output()
         .context("failed to create worktree")?;
     if !wt.status.success() {
-        bail!("git worktree add failed: {}", String::from_utf8_lossy(&wt.stderr));
+        bail!(
+            "git worktree add failed: {}",
+            String::from_utf8_lossy(&wt.stderr)
+        );
     }
 
     // Run merge in worktree
     let merge = Command::new("git")
-        .args(["merge", "--no-ff", source_branch, "-m",
-               &format!("Merge branch '{}' into {} ({})", source_branch, target_branch, pr_title)])
+        .args([
+            "merge",
+            "--no-ff",
+            source_branch,
+            "-m",
+            &format!(
+                "Merge branch '{}' into {} ({})",
+                source_branch, target_branch, pr_title
+            ),
+        ])
         .current_dir(&worktree_path)
         .env("GIT_AUTHOR_NAME", author_did)
         .env("GIT_AUTHOR_EMAIL", format!("{}@gitlawb", author_did))
@@ -349,7 +550,10 @@ pub fn merge_branch(repo_path: &Path, target_branch: &str, source_branch: &str,
     let _ = std::fs::remove_dir_all(&worktree_path);
 
     if !success {
-        bail!("git merge failed: {}", String::from_utf8_lossy(&merge.stderr));
+        bail!(
+            "git merge failed: {}",
+            String::from_utf8_lossy(&merge.stderr)
+        );
     }
 
     // Get new HEAD of target branch
@@ -365,8 +569,136 @@ pub fn merge_branch(repo_path: &Path, target_branch: &str, source_branch: &str,
 /// Resolve a repo disk path: {repos_dir}/{owner_slug}/{repo_name}.git
 pub fn repo_disk_path(repos_dir: &Path, owner_did: &str, repo_name: &str) -> PathBuf {
     // Sanitize the DID for use as a directory name
-    let owner_slug = owner_did
-        .replace(':', "_")
-        .replace('/', "_");
+    let owner_slug = owner_did.replace([':', '/'], "_");
     repos_dir.join(owner_slug).join(format!("{repo_name}.git"))
 }
+
+#[cfg(test)]
+mod tests {
+    use super::branch_diff_names;
+    use std::path::Path;
+    use std::process::Command;
+
+    #[test]
+    fn branch_diff_names_lists_changed_paths() {
+        let td = tempfile::TempDir::new().unwrap();
+        let work: &Path = td.path();
+        let g = |args: &[&str]| {
+            assert!(Command::new("git")
+                .args(args)
+                .current_dir(work)
+                .status()
+                .unwrap()
+                .success());
+        };
+        g(&["init", "-q"]);
+        g(&["config", "user.email", "t@t"]);
+        g(&["config", "user.name", "t"]);
+        std::fs::write(work.join("base.txt"), b"base\n").unwrap();
+        g(&["add", "."]);
+        g(&["commit", "-qm", "base"]);
+        let main = {
+            let o = Command::new("git")
+                .args(["symbolic-ref", "--short", "HEAD"])
+                .current_dir(work)
+                .output()
+                .unwrap();
+            String::from_utf8_lossy(&o.stdout).trim().to_string()
+        };
+        g(&["checkout", "-q", "-b", "feature"]);
+        std::fs::create_dir_all(work.join("secret")).unwrap();
+        std::fs::write(work.join("secret/x.txt"), b"secret\n").unwrap();
+        g(&["add", "."]);
+        g(&["commit", "-qm", "feat"]);
+
+        let names = branch_diff_names(work, &main, "feature").unwrap();
+        assert!(
+            names.iter().any(|p| p == "secret/x.txt"),
+            "expected secret/x.txt in changed paths, got {names:?}"
+        );
+        assert!(
+            !names.iter().any(|p| p == "base.txt"),
+            "unchanged file must not appear: {names:?}"
+        );
+    }
+
+    /// #173 round-10 (KTD2): `object_type_bounded` reaps a wedged `cat-file` child at its
+    /// deadline instead of blocking on it to natural exit, so a hung probe cannot pin the
+    /// /ipfs walk admission the owning task holds. A fake `git` records its pid and sleeps
+    /// far past the 1s deadline; the `run_bounded_git` watchdog (SIGTERM -> grace ->
+    /// SIGKILL of the process group) must kill it well before that natural exit, and the
+    /// call must surface `GitServiceTimeout`. REVERT PROOF (RED): swap the twin's
+    /// `run_bounded_git` for the bare `Command::output()` and the wedged child stays alive
+    /// past the deadline — the mid-flight liveness poll below reads it still running.
+    #[cfg(unix)]
+    #[test]
+    fn object_type_bounded_reaps_wedged_child_at_deadline() {
+        use std::time::Duration;
+        let tmp = tempfile::TempDir::new().unwrap();
+        let pidfile = tmp.path().join("catfile.pid");
+        // `cat-file` records its own pid then sleeps 8s (>> the 1s deadline) so the probe
+        // is genuinely wedged; the watchdog is what must end it.
+        let body = format!(
+            "#!/bin/sh\n\
+             case \"$1\" in\n\
+               cat-file) echo $$ > \"{}\"; sleep 8 ;;\n\
+               *) : ;;\n\
+             esac\n\
+             exit 0\n",
+            pidfile.display()
+        );
+        let git_path = tmp.path().join("fakegit");
+        std::fs::write(&git_path, &body).unwrap();
+        {
+            use std::os::unix::fs::PermissionsExt;
+            let mut perm = std::fs::metadata(&git_path).unwrap().permissions();
+            perm.set_mode(0o755);
+            std::fs::set_permissions(&git_path, perm).unwrap();
+        }
+        let repo = tmp.path().to_path_buf();
+        let git = git_path.to_str().unwrap().to_string();
+
+        let alive = |pid: i32| unsafe { libc::kill(pid, 0) == 0 };
+
+        // The bounded probe blocks until the watchdog tears the child down, so run it on
+        // a worker thread and poll for the reap from here.
+        let handle = std::thread::spawn(move || {
+            super::object_type_bounded(&git, &repo, "deadbeef", Duration::from_secs(1))
+        });
+
+        let mut pid = None;
+        for _ in 0..500 {
+            if let Some(p) = std::fs::read_to_string(&pidfile)
+                .ok()
+                .and_then(|s| s.trim().parse::<i32>().ok())
+            {
+                pid = Some(p);
+                break;
+            }
+            std::thread::sleep(Duration::from_millis(10));
+        }
+        let pid = pid.expect("the fake cat-file must have spawned and recorded its pid");
+
+        // Past the 1s deadline + SIGTERM grace but well before the 8s natural exit: the
+        // watchdog must already have reaped the wedged group. A bare, unbounded read would
+        // leave it running here — the load-bearing RED.
+        std::thread::sleep(Duration::from_secs(3));
+        let reaped = !alive(pid);
+        // Defensive reap so a RED run leaks no orphan.
+        unsafe {
+            libc::kill(pid, libc::SIGKILL);
+        }
+        assert!(
+            reaped,
+            "object_type_bounded must reap the wedged cat-file child at the deadline, \
+             not leave it running to its natural exit"
+        );
+
+        let res = handle.join().expect("probe thread joins");
+        let err = res.expect_err("a deadline overrun must be an error, not a value");
+        assert!(
+            err.is::<crate::git::smart_http::GitServiceTimeout>(),
+            "a deadline overrun must surface GitServiceTimeout, got: {err:?}"
+        );
+    }
+}

crates/gitlawb-node/src/git/tigris.rs

@@ -3,7 +3,9 @@
 //! Repos are stored as `repos/v1/{owner_slug}/{repo_name}.tar.zst` — a
 //! zstd-compressed tar archive of the bare repo directory.
 
-use std::path::Path;
+use std::collections::HashMap;
+use std::path::{Path, PathBuf};
+use std::sync::{Arc, Mutex, OnceLock};
 
 use anyhow::{Context, Result};
 use aws_sdk_s3::Client as S3Client;
@@ -23,7 +25,10 @@ impl TigrisClient {
         let config = aws_config::load_defaults(aws_config::BehaviorVersion::latest()).await;
         let s3 = S3Client::new(&config);
         info!(bucket = %bucket, "tigris storage client initialized");
-        Ok(Self { s3, bucket: bucket.to_string() })
+        Ok(Self {
+            s3,
+            bucket: bucket.to_string(),
+        })
     }
 
     /// S3 key for a given repo: `repos/v1/{owner_slug}/{repo_name}.tar.zst`
@@ -34,7 +39,9 @@ impl TigrisClient {
     /// Check if a repo archive exists in Tigris.
     pub async fn exists(&self, owner_slug: &str, repo_name: &str) -> Result<bool> {
         let key = Self::repo_key(owner_slug, repo_name);
-        match self.s3.head_object()
+        match self
+            .s3
+            .head_object()
             .bucket(&self.bucket)
             .key(&key)
             .send()
@@ -42,7 +49,7 @@ impl TigrisClient {
         {
             Ok(_) => Ok(true),
             Err(e) => {
-                if e.as_service_error().map_or(false, |e| e.is_not_found()) {
+                if e.as_service_error().is_some_and(|e| e.is_not_found()) {
                     Ok(false)
                 } else {
                     Err(anyhow::anyhow!("tigris HEAD {key}: {e}"))
@@ -67,7 +74,8 @@ impl TigrisClient {
 
         let body = aws_sdk_s3::primitives::ByteStream::from(archive_bytes);
 
-        self.s3.put_object()
+        self.s3
+            .put_object()
             .bucket(&self.bucket)
             .key(&key)
             .body(body)
@@ -81,21 +89,30 @@ impl TigrisClient {
     }
 
     /// Download a repo archive from Tigris and extract to local disk.
-    pub async fn download(&self, owner_slug: &str, repo_name: &str, local_path: &Path) -> Result<()> {
+    pub async fn download(
+        &self,
+        owner_slug: &str,
+        repo_name: &str,
+        local_path: &Path,
+    ) -> Result<()> {
         let key = Self::repo_key(owner_slug, repo_name);
         debug!(key = %key, path = %local_path.display(), "downloading repo from tigris");
 
-        let resp = self.s3.get_object()
+        let resp = self
+            .s3
+            .get_object()
             .bucket(&self.bucket)
             .key(&key)
             .send()
             .await
             .context(format!("tigris GET {key}"))?;
 
-        let data = resp.body.collect().await
+        let data = resp
+            .body
+            .collect()
+            .await
             .context("reading tigris response body")?
-            .into_bytes()
-            .to_vec();
+            .into_bytes();
 
         // Extract tar.zst to local path
         tokio::task::spawn_blocking({
@@ -114,7 +131,8 @@ impl TigrisClient {
     #[allow(dead_code)]
     pub async fn delete(&self, owner_slug: &str, repo_name: &str) -> Result<()> {
         let key = Self::repo_key(owner_slug, repo_name);
-        self.s3.delete_object()
+        self.s3
+            .delete_object()
             .bucket(&self.bucket)
             .key(&key)
             .send()
@@ -139,17 +157,70 @@ fn compress_repo(repo_path: &Path) -> Result<Vec<u8>> {
     Ok(compressed)
 }
 
-/// Decompress a tar.zst byte vector into a local directory.
-fn decompress_repo(data: &[u8], local_path: &Path) -> Result<()> {
-    // Ensure parent directory exists
-    if let Some(parent) = local_path.parent() {
-        std::fs::create_dir_all(parent).context("creating parent dir")?;
-    }
-    std::fs::create_dir_all(local_path).context("creating repo dir")?;
+/// Per-repo-path lock serializing the publish (swap-into-place) step of
+/// `decompress_repo`. Concurrent extractions unpack into isolated temp dirs in
+/// parallel, but the final `remove_dir_all` + `rename` must not interleave for
+/// the same `local_path`, or they race to a nondeterministic overwrite/failure.
+fn publish_lock(local_path: &Path) -> Arc<Mutex<()>> {
+    // KNOWN LIMITATION: this map is never evicted — one (PathBuf, Arc<Mutex>)
+    // entry accrues per distinct repo path for the process lifetime. Bounded by
+    // the number of repos a node hosts, so it's negligible for normal use, but
+    // high-volume/churning deployments may want LRU or weak-ref eviction here.
+    static LOCKS: OnceLock<Mutex<HashMap<PathBuf, Arc<Mutex<()>>>>> = OnceLock::new();
+    let locks = LOCKS.get_or_init(|| Mutex::new(HashMap::new()));
+    let mut map = locks.lock().expect("publish lock map poisoned");
+    map.entry(local_path.to_path_buf())
+        .or_insert_with(|| Arc::new(Mutex::new(())))
+        .clone()
+}
 
-    let decoder = zstd::stream::Decoder::new(data)?;
-    let mut archive = tar::Archive::new(decoder);
-    archive.unpack(local_path).context("unpacking tar.zst")?;
+/// Decompress a tar.zst byte vector into a local directory.
+///
+/// Extraction is atomic with respect to `local_path`: the archive is unpacked
+/// into a sibling temp directory first, and only swapped into place once it
+/// fully succeeds. A corrupt or truncated archive therefore can never clobber a
+/// good existing copy at `local_path` — on failure we discard the temp dir and
+/// leave `local_path` exactly as it was.
+fn decompress_repo(data: &[u8], local_path: &Path) -> Result<()> {
+    let parent = local_path.parent().context("repo path has no parent")?;
+    std::fs::create_dir_all(parent).context("creating parent dir")?;
+
+    let file_name = local_path
+        .file_name()
+        .context("repo path has no file name")?
+        .to_string_lossy();
+    // Unique per-extraction temp dir: a fixed name would let two concurrent
+    // extractions of the same repo share one dir and clobber each other's
+    // in-progress unpack. A fresh UUID also means it can't collide with a
+    // leftover dir from a previously-interrupted run.
+    let tmp_dir = parent.join(format!(".{file_name}.tmp-extract.{}", uuid::Uuid::new_v4()));
+
+    std::fs::create_dir_all(&tmp_dir).context("creating temp extract dir")?;
+
+    // Unpack into the temp dir; on any failure, clean up and bail without
+    // touching local_path.
+    let unpack = (|| -> Result<()> {
+        let decoder = zstd::stream::Decoder::new(data)?;
+        let mut archive = tar::Archive::new(decoder);
+        archive.unpack(&tmp_dir).context("unpacking tar.zst")?;
+        Ok(())
+    })();
+    if let Err(e) = unpack {
+        let _ = std::fs::remove_dir_all(&tmp_dir);
+        return Err(e);
+    }
+
+    // Swap the freshly-extracted repo into place. rename within the same parent
+    // is effectively atomic, but most platforms refuse to rename onto a
+    // non-empty dir, so remove the old copy first. Serialize this per repo path:
+    // concurrent extractions unpack into isolated temp dirs, but their swaps
+    // must not interleave or they race to a nondeterministic overwrite/failure.
+    let lock = publish_lock(local_path);
+    let _publish = lock.lock().expect("publish lock poisoned");
+    if local_path.exists() {
+        std::fs::remove_dir_all(local_path).context("removing stale repo dir")?;
+    }
+    std::fs::rename(&tmp_dir, local_path).context("swapping extracted repo into place")?;
 
     Ok(())
 }

crates/gitlawb-node/src/graphql/mutation.rs

@@ -3,11 +3,21 @@ use chrono::Utc;
 use std::sync::Arc;
 use uuid::Uuid;
 
+use crate::auth::AuthenticatedDid;
 use crate::db::{AgentTask, Db};
 use crate::state::TaskEventBroadcast;
 
 use super::types::{AgentTaskType, CreateTaskInput, FinishTaskInput};
 
+/// The verified signer DID for this request, or an auth error (N2). The DID is
+/// attached request-scoped by the `/graphql` `optional_signature` layer; its
+/// absence means the request was unsigned, so every mutation rejects.
+fn require_signer<'a>(ctx: &'a Context<'_>) -> Result<&'a str> {
+    ctx.data::<AuthenticatedDid>()
+        .map(|d| d.0.as_str())
+        .map_err(|_| async_graphql::Error::new("authentication required"))
+}
+
 pub struct MutationRoot;
 
 #[Object]
@@ -18,6 +28,13 @@ impl MutationRoot {
         delegator_did: String,
         input: CreateTaskInput,
     ) -> Result<AgentTaskType> {
+        let caller = require_signer(ctx)?;
+        if !crate::api::did_matches(caller, &delegator_did) {
+            return Err(async_graphql::Error::new(
+                "delegator_did must be the authenticated signer",
+            ));
+        }
+        let delegator_did = caller.to_string();
         let db = ctx.data_unchecked::<Arc<Db>>();
         let now = Utc::now().to_rfc3339();
         let task = AgentTask {
@@ -47,9 +64,15 @@ impl MutationRoot {
         id: String,
         assignee_did: String,
     ) -> Result<AgentTaskType> {
+        let caller = require_signer(ctx)?;
+        if !crate::api::did_matches(caller, &assignee_did) {
+            return Err(async_graphql::Error::new(
+                "assignee_did must be the authenticated signer",
+            ));
+        }
+        let assignee_did = caller.to_string();
         let db = ctx.data_unchecked::<Arc<Db>>();
-        let tx = ctx
-            .data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
+        let tx = ctx.data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
         let task = db
             .claim_task(&id, &assignee_did)
             .await
@@ -71,9 +94,27 @@ impl MutationRoot {
         by_did: String,
         input: FinishTaskInput,
     ) -> Result<AgentTaskType> {
+        let caller = require_signer(ctx)?;
+        if !crate::api::did_matches(caller, &by_did) {
+            return Err(async_graphql::Error::new(
+                "by_did must be the authenticated signer",
+            ));
+        }
+        let by_did = caller.to_string();
         let db = ctx.data_unchecked::<Arc<Db>>();
-        let tx = ctx
-            .data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
+        let tx = ctx.data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
+        // Authorize the actor: binding by_did to the signer is necessary but not
+        // sufficient — only the task's assignee may finish it.
+        let existing = db
+            .get_task(&id)
+            .await
+            .map_err(|e| async_graphql::Error::new(e.to_string()))?
+            .ok_or_else(|| async_graphql::Error::new("task not found"))?;
+        if !crate::api::did_matches(caller, existing.assignee_did.as_deref().unwrap_or_default()) {
+            return Err(async_graphql::Error::new(
+                "only the task assignee can complete it",
+            ));
+        }
         let task = db
             .finish_task(&id, "completed", input.result.as_deref())
             .await
@@ -95,9 +136,26 @@ impl MutationRoot {
         by_did: String,
         input: FinishTaskInput,
     ) -> Result<AgentTaskType> {
+        let caller = require_signer(ctx)?;
+        if !crate::api::did_matches(caller, &by_did) {
+            return Err(async_graphql::Error::new(
+                "by_did must be the authenticated signer",
+            ));
+        }
+        let by_did = caller.to_string();
         let db = ctx.data_unchecked::<Arc<Db>>();
-        let tx = ctx
-            .data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
+        let tx = ctx.data_unchecked::<tokio::sync::broadcast::Sender<TaskEventBroadcast>>();
+        // Authorize the actor: only the task's assignee may fail it.
+        let existing = db
+            .get_task(&id)
+            .await
+            .map_err(|e| async_graphql::Error::new(e.to_string()))?
+            .ok_or_else(|| async_graphql::Error::new("task not found"))?;
+        if !crate::api::did_matches(caller, existing.assignee_did.as_deref().unwrap_or_default()) {
+            return Err(async_graphql::Error::new(
+                "only the task assignee can fail it",
+            ));
+        }
         let reason = input.reason.unwrap_or_default();
         let task = db
             .finish_task(&id, "failed", Some(&reason))
@@ -113,3 +171,123 @@ impl MutationRoot {
         Ok(AgentTaskType::from(task))
     }
 }
+
+#[cfg(test)]
+mod tests {
+    use crate::auth::AuthenticatedDid;
+    use async_graphql::{Request, Response};
+    use sqlx::PgPool;
+
+    fn errors(resp: &Response) -> String {
+        resp.errors
+            .iter()
+            .map(|e| e.message.clone())
+            .collect::<Vec<_>>()
+            .join("; ")
+    }
+
+    /// N2: GraphQL mutations require a verified signer and bind the acting DID to
+    /// it. Unsigned is rejected; a signer other than the claimed actor is
+    /// rejected; the matching signer passes the auth gate.
+    #[sqlx::test]
+    async fn mutation_requires_and_binds_signer(pool: PgPool) {
+        let state = crate::test_support::test_state(pool).await;
+        let schema = state.graphql_schema.as_ref();
+        let assignee = "did:key:zASSIGNEEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
+        let q = format!(
+            r#"mutation {{ claimTask(id: "no-such-task", assigneeDid: "{assignee}") {{ id }} }}"#
+        );
+
+        // 1. Unsigned → rejected before any DB work.
+        let resp = schema.execute(Request::new(&q)).await;
+        assert!(
+            errors(&resp).contains("authentication required"),
+            "unsigned mutation must be rejected: {}",
+            errors(&resp)
+        );
+
+        // 2. Signed as someone other than the claimed assignee → rejected.
+        let resp = schema
+            .execute(Request::new(&q).data(AuthenticatedDid(
+                "did:key:zOTHERBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB".into(),
+            )))
+            .await;
+        assert!(
+            errors(&resp).contains("authenticated signer"),
+            "DID mismatch must be rejected: {}",
+            errors(&resp)
+        );
+
+        // 3. Signed as the claimed assignee → passes the auth gate (any remaining
+        //    error is the missing task, not an auth error).
+        let resp = schema
+            .execute(Request::new(&q).data(AuthenticatedDid(assignee.into())))
+            .await;
+        let errs = errors(&resp);
+        assert!(
+            !errs.contains("authentication required") && !errs.contains("authenticated signer"),
+            "matching signer must pass the auth gate: {errs}"
+        );
+    }
+
+    /// Adversarial-review GATE-1 (GraphQL): completing a task requires being its
+    /// assignee, not merely signing as the by_did you pass. A signer who is not
+    /// the assignee is rejected even though the by_did binding passes; the
+    /// assignee completes.
+    #[sqlx::test]
+    async fn complete_task_requires_assignee(pool: PgPool) {
+        let state = crate::test_support::test_state(pool).await;
+        let assignee = "did:key:zGQLASSIGNEEAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
+        let stranger = "did:key:zGQLSTRANGERBBBBBBBBBBBBBBBBBBBBBBBBBBBB";
+        let now = chrono::Utc::now().to_rfc3339();
+        let task = crate::db::AgentTask {
+            id: "task-g".into(),
+            repo_id: None,
+            kind: "build".into(),
+            status: "pending".into(),
+            delegator_did: "did:key:zGQLDELEGATORCCCCCCCCCCCCCCCCCCCCCCCCCC".into(),
+            assignee_did: None,
+            capability: "repo:write".into(),
+            ucan_token: None,
+            payload: None,
+            result: None,
+            created_at: now.clone(),
+            updated_at: now,
+            deadline: None,
+        };
+        state.db.create_task(&task).await.expect("seed task");
+        state
+            .db
+            .claim_task("task-g", assignee)
+            .await
+            .expect("claim");
+        let schema = state.graphql_schema.as_ref();
+
+        let q = |actor: &str| {
+            format!(
+                r#"mutation {{ completeTask(id: "task-g", byDid: "{actor}", input: {{}}) {{ id status }} }}"#
+            )
+        };
+
+        // Stranger signs as themselves and passes byDid=self (so the signer
+        // binding passes), but is not the assignee → rejected by authorization.
+        let resp = schema
+            .execute(Request::new(q(stranger)).data(AuthenticatedDid(stranger.into())))
+            .await;
+        assert!(
+            errors(&resp).contains("assignee"),
+            "a non-assignee signer must be rejected: {}",
+            errors(&resp)
+        );
+
+        // The assignee completes with no error.
+        let resp = schema
+            .execute(Request::new(q(assignee)).data(AuthenticatedDid(assignee.into())))
+            .await;
+        assert!(
+            errors(&resp).is_empty(),
+            "the assignee should complete the task: {}",
+            errors(&resp)
+        );
+    }
+}

crates/gitlawb-node/src/graphql/query.rs

@@ -12,11 +12,29 @@ impl QueryRoot {
     async fn repos(&self, ctx: &Context<'_>) -> Result<Vec<RepoType>> {
         let db = ctx.data_unchecked::<Arc<Db>>();
         let repos = db
-            .list_all_repos()
+            .list_all_repos_deduped()
             .await
             .map_err(|e| async_graphql::Error::new(e.to_string()))?;
+
+        // Apply the same "/" visibility gate the REST/per-repo endpoints use so
+        // this surface does not enumerate private repos (#97). The caller DID is
+        // threaded onto the context by optional_signature; absent = anonymous.
+        let caller = ctx
+            .data::<crate::auth::AuthenticatedDid>()
+            .ok()
+            .map(|d| d.0.as_str());
+        let ids: Vec<String> = repos.iter().map(|r| r.id.clone()).collect();
+        let rules_by_repo = db
+            .list_visibility_rules_for_repos(&ids)
+            .await
+            .map_err(|e| async_graphql::Error::new(e.to_string()))?;
+
         Ok(repos
             .into_iter()
+            .filter(|r| {
+                let rules = rules_by_repo.get(&r.id).map(Vec::as_slice).unwrap_or(&[]);
+                crate::visibility::listable_at_root(rules, r.is_public, &r.owner_did, caller)
+            })
             .map(|r| RepoType {
                 name: r.name,
                 owner_did: r.owner_did,
@@ -31,13 +49,30 @@ impl QueryRoot {
         &self,
         ctx: &Context<'_>,
         repo: Option<String>,
-        #[graphql(default = 20)] limit: i64,
+        #[graphql(
+            default = 20,
+            desc = "Max 200; larger requests return the newest 200 rows (no continuation cursor)."
+        )]
+        limit: i64,
     ) -> Result<Vec<RefUpdateType>> {
         let db = ctx.data_unchecked::<Arc<Db>>();
-        let updates = db
-            .list_ref_updates_filtered(repo.as_deref(), limit)
-            .await
-            .map_err(|e| async_graphql::Error::new(e.to_string()))?;
+
+        // Gate each row on the same "/" visibility decision the repos resolver
+        // uses, so anonymous callers get no row for a local repo they can't read
+        // (#112). The shared collector applies the fail-closed gate *before* the
+        // limit (paging past dropped private rows) so a small limit still returns
+        // the latest visible events, and keeps this surface byte-identical to the
+        // REST feed (#114). The row slug is peer-supplied, so the pure filter
+        // treats it as untrusted input; remote (no local match) rows pass.
+        let caller = ctx
+            .data::<crate::auth::AuthenticatedDid>()
+            .ok()
+            .map(|d| d.0.as_str());
+        let updates =
+            crate::api::events::collect_visible_ref_updates(db, repo.as_deref(), limit, caller)
+                .await
+                .map_err(|e| async_graphql::Error::new(e.to_string()))?;
+
         Ok(updates
             .into_iter()
             .map(|u| RefUpdateType {
@@ -76,3 +111,288 @@ impl QueryRoot {
         Ok(t.map(AgentTaskType::from))
     }
 }
+
+#[cfg(test)]
+mod tests {
+    use crate::db::{Db, ReceivedRefUpdate, RepoRecord};
+    use chrono::Utc;
+    use sqlx::PgPool;
+    use std::sync::Arc;
+
+    const OWNER: &str = "did:key:z6MkOwner";
+
+    async fn db(pool: PgPool) -> Arc<Db> {
+        let db = Db::for_testing(pool);
+        db.run_migrations().await.unwrap();
+        Arc::new(db)
+    }
+
+    fn schema(db: Arc<Db>) -> super::super::GitlawbSchema {
+        let (ref_tx, _) = tokio::sync::broadcast::channel(16);
+        let (task_tx, _) = tokio::sync::broadcast::channel(16);
+        super::super::build_schema(db, ref_tx, task_tx)
+    }
+
+    fn repo(id: &str, owner_did: &str, name: &str, is_public: bool) -> RepoRecord {
+        RepoRecord {
+            id: id.into(),
+            name: name.into(),
+            owner_did: owner_did.into(),
+            description: None,
+            is_public,
+            default_branch: "main".into(),
+            created_at: Utc::now(),
+            updated_at: Utc::now(),
+            disk_path: format!("/srv/{id}"),
+            forked_from: None,
+            machine_id: None,
+        }
+    }
+
+    fn ref_row(id: &str, slug: &str) -> ReceivedRefUpdate {
+        ReceivedRefUpdate {
+            id: id.into(),
+            node_did: "did:key:z6MkNode".into(),
+            pusher_did: "did:key:z6MkPusher".into(),
+            repo: slug.into(),
+            ref_name: "refs/heads/main".into(),
+            old_sha: "0".repeat(40),
+            new_sha: "a".repeat(40),
+            timestamp: Utc::now().to_rfc3339(),
+            cert_id: None,
+            received_at: Utc::now().to_rfc3339(),
+            from_peer: "peer1".into(),
+        }
+    }
+
+    /// Count `refUpdates` rows in a GraphQL response.
+    fn count(resp: &async_graphql::Response) -> usize {
+        assert!(resp.errors.is_empty(), "graphql errors: {:?}", resp.errors);
+        let async_graphql::Value::Object(obj) = &resp.data else {
+            panic!("data not an object: {:?}", resp.data);
+        };
+        let async_graphql::Value::List(rows) = obj.get("refUpdates").expect("refUpdates key")
+        else {
+            panic!("refUpdates not a list");
+        };
+        rows.len()
+    }
+
+    async fn anon(schema: &super::super::GitlawbSchema, query: &str) -> async_graphql::Response {
+        schema.execute(async_graphql::Request::new(query)).await
+    }
+
+    async fn authed(
+        schema: &super::super::GitlawbSchema,
+        query: &str,
+        did: &str,
+    ) -> async_graphql::Response {
+        schema
+            .execute(
+                async_graphql::Request::new(query)
+                    .data(crate::auth::AuthenticatedDid(did.to_string())),
+            )
+            .await
+    }
+
+    // Scenario 1 — anon must not get a private local repo's row on the
+    // repo:Some branch. This is the load-bearing RED→GREEN case.
+    #[sqlx::test]
+    async fn ref_updates_private_repo_dropped_for_anon(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("r1", OWNER, "widget", false))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u1", "z6MkOwner/widget"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        // The GraphQL `repo` arg is the raw slug DB filter, so it must equal the
+        // stored slug to select the row at all — this is the exact leak path.
+        let q = r#"{ refUpdates(repo: "z6MkOwner/widget") { refName newSha pusherDid } }"#;
+        assert_eq!(count(&anon(&schema, q).await), 0);
+    }
+
+    // Scenario 2 — owner still sees their own private repo's row.
+    #[sqlx::test]
+    async fn ref_updates_private_repo_kept_for_owner(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("r1", OWNER, "widget", false))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u1", "z6MkOwner/widget"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates(repo: "z6MkOwner/widget") { refName } }"#;
+        assert_eq!(count(&authed(&schema, q, OWNER).await), 1);
+    }
+
+    // Scenario 3 — unfiltered (repo:None): anon gets only the public row.
+    #[sqlx::test]
+    async fn ref_updates_unfiltered_anon_gets_only_public(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("pub", OWNER, "openrepo", true))
+            .await
+            .unwrap();
+        db.create_repo(&repo("priv", OWNER, "secret", false))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u_pub", "z6MkOwner/openrepo"))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u_priv", "z6MkOwner/secret"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates { repo refName } }"#;
+        let resp = anon(&schema, q).await;
+        assert_eq!(count(&resp), 1);
+        // The one row returned must be the public repo's.
+        let async_graphql::Value::Object(obj) = &resp.data else {
+            unreachable!()
+        };
+        let async_graphql::Value::List(rows) = obj.get("refUpdates").unwrap() else {
+            unreachable!()
+        };
+        let async_graphql::Value::Object(row) = &rows[0] else {
+            unreachable!()
+        };
+        assert_eq!(
+            row.get("repo").unwrap(),
+            &async_graphql::Value::from("z6MkOwner/openrepo")
+        );
+    }
+
+    // Scenario 4 — alias fail-closed: private repo's row stored full-DID form.
+    #[sqlx::test]
+    async fn ref_updates_full_did_slug_dropped_for_anon(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("r1", "did:key:zABC", "widget", false))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u1", "did:key:zABC/widget"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        // repo:None so the slug is not the DB filter key (which is verbatim);
+        // the gate must still drop it.
+        let q = r#"{ refUpdates { repo } }"#;
+        assert_eq!(count(&anon(&schema, q).await), 0);
+    }
+
+    // Scenario 5 — truncated-key fail-closed: 8-char-prefix owner form.
+    #[sqlx::test]
+    async fn ref_updates_truncated_key_slug_dropped_for_anon(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("r1", "did:key:zABCDEFGH", "widget", false))
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u1", "zABCDEF/widget"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates { repo } }"#;
+        assert_eq!(count(&anon(&schema, q).await), 0);
+    }
+
+    // Scenario 6 — remote slug (no local match) is returned to anon.
+    #[sqlx::test]
+    async fn ref_updates_remote_slug_kept_for_anon(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("r1", OWNER, "widget", false))
+            .await
+            .unwrap();
+        // Row whose slug matches no local repo (different owner + name).
+        db.insert_ref_update(&ref_row("u1", "zZZZOTHER/gadget"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates { repo } }"#;
+        assert_eq!(count(&anon(&schema, q).await), 1);
+    }
+
+    // Scenario 7 (#114 P2) — a small limit must page past the newest rows when
+    // they are private, so the older public rows are still returned. Before the
+    // gate moved ahead of the limit this returned 0 (the newest `limit` rows were
+    // all private and got filtered after the SQL LIMIT). RED→GREEN.
+    #[sqlx::test]
+    async fn ref_updates_small_limit_pages_past_newest_private(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("pub", OWNER, "openrepo", true))
+            .await
+            .unwrap();
+        db.create_repo(&repo("priv", OWNER, "secret", false))
+            .await
+            .unwrap();
+        // 3 older PUBLIC rows …
+        for i in 0..3 {
+            let mut r = ref_row(&format!("pub{i}"), "z6MkOwner/openrepo");
+            r.timestamp = format!("2026-07-01T10:00:0{i}+00:00");
+            db.insert_ref_update(&r).await.unwrap();
+        }
+        // … then 5 NEWER PRIVATE rows (the newest in the feed).
+        for i in 0..5 {
+            let mut r = ref_row(&format!("priv{i}"), "z6MkOwner/secret");
+            r.timestamp = format!("2026-07-01T10:00:1{i}+00:00");
+            db.insert_ref_update(&r).await.unwrap();
+        }
+        let schema = schema(db);
+        // limit 3 < the 5 newest (all private): anon must still get 3 public rows.
+        let q = r#"{ refUpdates(limit: 3) { repo } }"#;
+        let resp = anon(&schema, q).await;
+        assert_eq!(count(&resp), 3, "paging must reach the older public rows");
+        let async_graphql::Value::Object(obj) = &resp.data else {
+            unreachable!()
+        };
+        let async_graphql::Value::List(rows) = obj.get("refUpdates").unwrap() else {
+            unreachable!()
+        };
+        for row in rows {
+            let async_graphql::Value::Object(r) = row else {
+                unreachable!()
+            };
+            assert_eq!(
+                r.get("repo").unwrap(),
+                &async_graphql::Value::from("z6MkOwner/openrepo"),
+                "every returned row must be the public repo's"
+            );
+        }
+    }
+
+    // Scenario 8 — a quarantined mirror is withheld on the GraphQL surface too.
+    // Guards that the resolver keeps delegating to the shared collector (where the
+    // quarantine fold lives); a REST-only test would miss a resolver that stopped.
+    #[sqlx::test]
+    async fn ref_updates_quarantined_mirror_dropped_for_anon(pool: PgPool) {
+        let db = db(pool).await;
+        db.upsert_mirror_repo("z6MkQuar", "secret", "/tmp/q", None, true)
+            .await
+            .unwrap();
+        db.insert_ref_update(&ref_row("u1", "z6MkQuar/secret"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates { repo } }"#;
+        assert_eq!(count(&anon(&schema, q).await), 0);
+    }
+
+    // Scenario 8b — the GraphQL surface also withholds a quarantined repo from an
+    // authenticated OWNER, not just anon. Without the collector's quarantine drop
+    // the owner short-circuit in visibility_check keeps the row on this surface
+    // too, so the REST owner test alone would not guard the resolver.
+    #[sqlx::test]
+    async fn ref_updates_quarantined_repo_dropped_for_owner(pool: PgPool) {
+        let db = db(pool).await;
+        db.create_repo(&repo("q1", "did:key:z6MkQuar", "secret", false))
+            .await
+            .unwrap();
+        db.set_repo_quarantine("q1", true).await.unwrap();
+        db.insert_ref_update(&ref_row("u1", "z6MkQuar/secret"))
+            .await
+            .unwrap();
+        let schema = schema(db);
+        let q = r#"{ refUpdates { repo } }"#;
+        assert_eq!(count(&authed(&schema, q, "did:key:z6MkQuar").await), 0);
+    }
+}

crates/gitlawb-node/src/graphql/subscription.rs

@@ -1,5 +1,5 @@
-use async_graphql::{Context, Subscription};
 use async_graphql::futures_util::Stream;
+use async_graphql::{Context, Subscription};
 use tokio_stream::wrappers::BroadcastStream;
 use tokio_stream::StreamExt as _;
 
@@ -11,6 +11,15 @@ pub struct SubscriptionRoot;
 
 #[Subscription]
 impl SubscriptionRoot {
+    /// Live ref-update stream. `/graphql/ws` is mounted outside the
+    /// `optional_signature` layer, so this resolver has NO caller identity and
+    /// cannot gate per-subscriber — it relays whatever enters the broadcast
+    /// channel to any anonymous client. Its visibility safety therefore rests
+    /// entirely on the WRITE side: the push handler only sends a
+    /// `RefUpdateBroadcast` for repos the anonymous public may read (inside its
+    /// `if announce` block, `api/repos.rs`). This is a single-point invariant —
+    /// any new sender to `ref_update_tx` MUST be `announce`-gated, or private-repo
+    /// ref metadata leaks here to unauthenticated subscribers (#112/#114 class).
     async fn ref_updates(
         &self,
         ctx: &Context<'_>,
@@ -22,7 +31,7 @@ impl SubscriptionRoot {
         BroadcastStream::new(rx).filter_map(move |r| {
             let rf = repo.clone();
             match r {
-                Ok(ev) if rf.as_deref().map_or(true, |r| ev.repo == r) => Some(RefUpdateType {
+                Ok(ev) if rf.as_deref().is_none_or(|r| ev.repo == r) => Some(RefUpdateType {
                     repo: ev.repo,
                     ref_name: ev.ref_name,
                     old_sha: ev.old_sha,
@@ -47,15 +56,13 @@ impl SubscriptionRoot {
         BroadcastStream::new(rx).filter_map(move |r| {
             let tf = task_id.clone();
             match r {
-                Ok(ev) if tf.as_deref().map_or(true, |id| ev.task_id == id) => {
-                    Some(TaskEventType {
-                        task_id: ev.task_id,
-                        old_status: ev.old_status,
-                        new_status: ev.new_status,
-                        by_did: ev.by_did,
-                        at: ev.at,
-                    })
-                }
+                Ok(ev) if tf.as_deref().is_none_or(|id| ev.task_id == id) => Some(TaskEventType {
+                    task_id: ev.task_id,
+                    old_status: ev.old_status,
+                    new_status: ev.new_status,
+                    by_did: ev.by_did,
+                    at: ev.at,
+                }),
                 _ => None,
             }
         })

crates/gitlawb-node/src/icaptcha.rs

@@ -0,0 +1,650 @@
+//! iCaptcha proof-of-intelligence gate.
+//!
+//! Spam-prone endpoints (repo creation, agent registration) can require the
+//! caller to present an iCaptcha proof: a small Ed25519-signed token minted by
+//! <https://icaptcha.gitlawb.com> after the caller solves an escalating
+//! challenge. We verify the proof OFFLINE (no per-request call to iCaptcha)
+//! using its published public key, and bind each proof to the authenticated
+//! agent DID so a proof cannot be shared between identities.
+//!
+//! Behaviour is controlled by `ICAPTCHA_MODE`:
+//!   * `off`     (default) — gate is inert, nothing is checked.
+//!   * `shadow`  — verify and log would-be rejections, but always allow.
+//!   * `enforce` — reject requests without a valid, sufficiently-strong proof.
+//!
+//! Config (env):
+//!   ICAPTCHA_MODE            off | shadow | enforce         (default off)
+//!   ICAPTCHA_URL             base URL                        (default https://icaptcha.gitlawb.com)
+//!   ICAPTCHA_PUBKEY          base64url Ed25519 public key    (optional; else fetched from /v1/pubkey)
+//!   ICAPTCHA_REQUIRED_LEVEL  minimum proof level             (default 3)
+
+use std::sync::OnceLock;
+use std::time::{Duration, SystemTime, UNIX_EPOCH};
+
+use axum::http::HeaderMap;
+use base64::engine::general_purpose::URL_SAFE_NO_PAD;
+use base64::Engine;
+use ed25519_dalek::{Signature, VerifyingKey};
+use serde::Deserialize;
+
+use crate::error::AppError;
+
+const PROOF_HEADER: &str = "x-icaptcha-proof";
+
+/// How long a mirror-admission `jti` stays in the replay ledger. The direct
+/// request path spends a proof against its own `exp` (it can't be presented once
+/// expired). The propagation path deliberately accepts already-expired proofs,
+/// so spending against `exp` would store an already-past expiry that the next
+/// sweep deletes — letting the same token admit another mirror minutes later.
+/// We instead retain the mirror replay record for a long, fixed window so the
+/// per-node single-use property is durable.
+const MIRROR_REPLAY_RETENTION_SECS: i64 = 365 * 24 * 60 * 60;
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+pub enum Mode {
+    Off,
+    Shadow,
+    Enforce,
+}
+
+impl Mode {
+    fn as_str(self) -> &'static str {
+        match self {
+            Mode::Off => "off",
+            Mode::Shadow => "shadow",
+            Mode::Enforce => "enforce",
+        }
+    }
+}
+
+/// Parse `ICAPTCHA_MODE`. Returns `None` for unrecognized values so the caller
+/// can surface the typo instead of silently disabling the gate.
+fn parse_mode(s: &str) -> Option<Mode> {
+    match s.trim().to_ascii_lowercase().as_str() {
+        "" | "off" => Some(Mode::Off),
+        "shadow" => Some(Mode::Shadow),
+        "enforce" => Some(Mode::Enforce),
+        _ => None,
+    }
+}
+
+/// Parse `ICAPTCHA_REQUIRED_LEVEL`. Defaults to 3; warns (rather than silently
+/// lowering the threshold) when a non-empty value fails to parse.
+fn parse_required_level() -> u32 {
+    const DEFAULT: u32 = 3;
+    match std::env::var("ICAPTCHA_REQUIRED_LEVEL") {
+        Ok(v) if !v.trim().is_empty() => v.trim().parse().unwrap_or_else(|_| {
+            tracing::warn!(
+                value = %v,
+                default = DEFAULT,
+                "invalid ICAPTCHA_REQUIRED_LEVEL; using default"
+            );
+            DEFAULT
+        }),
+        _ => DEFAULT,
+    }
+}
+
+struct Verifier {
+    mode: Mode,
+    url: String,
+    required_level: u32,
+    key: Option<VerifyingKey>,
+}
+
+static VERIFIER: OnceLock<Verifier> = OnceLock::new();
+
+#[derive(Deserialize, Debug)]
+struct ProofClaims {
+    sub: String,
+    level: u32,
+    exp: i64,
+    /// Unique proof id, consumed once so a proof cannot be replayed.
+    jti: String,
+}
+
+#[derive(Deserialize)]
+struct Jwk {
+    x: String,
+}
+
+#[derive(Deserialize)]
+struct Jwks {
+    keys: Vec<Jwk>,
+}
+
+fn now_secs() -> i64 {
+    SystemTime::now()
+        .duration_since(UNIX_EPOCH)
+        .map(|d| d.as_secs() as i64)
+        .unwrap_or(0)
+}
+
+fn decode_key(b64url: &str) -> Option<VerifyingKey> {
+    let bytes = URL_SAFE_NO_PAD.decode(b64url.trim()).ok()?;
+    let arr: [u8; 32] = bytes.try_into().ok()?;
+    VerifyingKey::from_bytes(&arr).ok()
+}
+
+async fn fetch_key(url: &str) -> Option<VerifyingKey> {
+    let endpoint = format!("{}/v1/pubkey", url.trim_end_matches('/'));
+    // Bounded request: a hung /v1/pubkey must never block node startup. On
+    // timeout/error we return None and the gate stays inert (fail safe).
+    let client = reqwest::Client::builder()
+        .timeout(Duration::from_secs(5))
+        .build()
+        .ok()?;
+    let jwks: Jwks = client.get(&endpoint).send().await.ok()?.json().await.ok()?;
+    decode_key(&jwks.keys.first()?.x)
+}
+
+/// Initialize the gate from the environment. Call once at startup. Never panics;
+/// if the gate is active but no key can be loaded, it stays inert and warns.
+pub async fn init() {
+    let raw_mode = std::env::var("ICAPTCHA_MODE").unwrap_or_default();
+    let mode = parse_mode(&raw_mode).unwrap_or_else(|| {
+        tracing::warn!(value = %raw_mode, "invalid ICAPTCHA_MODE; disabling iCaptcha gate");
+        Mode::Off
+    });
+    let url = std::env::var("ICAPTCHA_URL")
+        .unwrap_or_else(|_| "https://icaptcha.gitlawb.com".to_string());
+    let required_level = parse_required_level();
+
+    let key = if mode == Mode::Off {
+        None
+    } else {
+        match std::env::var("ICAPTCHA_PUBKEY") {
+            Ok(b64) if !b64.is_empty() => decode_key(&b64),
+            _ => fetch_key(&url).await,
+        }
+    };
+
+    if mode != Mode::Off {
+        if key.is_some() {
+            tracing::info!(mode = mode.as_str(), required_level, "iCaptcha gate active");
+        } else {
+            tracing::warn!(
+                mode = mode.as_str(),
+                "iCaptcha gate enabled but no public key could be loaded; staying inert"
+            );
+        }
+    }
+
+    let _ = VERIFIER.set(Verifier {
+        mode,
+        url,
+        required_level,
+        key,
+    });
+}
+
+/// Outcome of the synchronous, IO-free decision step.
+#[derive(Debug)]
+enum Decision {
+    /// Allow the request (off, shadow, inert/no-key, or verified non-enforcing).
+    Allow,
+    /// Enforce mode and verification failed; reject with this reason.
+    Reject(String),
+    /// Enforce mode and the proof verified; the caller must consume its `jti`
+    /// (and reject replays) before allowing, then may persist it.
+    Consume(VerifiedProof),
+}
+
+/// A verified proof: the raw token plus the claims we act on. Carried by a
+/// [`ProofGuard`] so that, once consumed, the gated handler can persist it with
+/// the created repo — letting the proof travel with the repo when it propagates
+/// to peers (see [`admit_mirror`]).
+#[derive(Debug)]
+pub struct VerifiedProof {
+    token: String,
+    sub: String,
+    level: u32,
+    jti: String,
+    exp: i64,
+}
+
+impl VerifiedProof {
+    /// Persist this proof against a freshly-created repo so a mirroring peer can
+    /// re-verify it. Best-effort callers may ignore failures; the gate's
+    /// security does not depend on it (propagation just falls back to quarantine).
+    pub async fn record_for_repo(&self, db: &crate::db::Db, repo_id: &str) -> Result<(), AppError> {
+        db.record_repo_proof(
+            repo_id,
+            &self.token,
+            &self.sub,
+            self.level as i32,
+            &self.jti,
+            self.exp,
+        )
+        .await?;
+        Ok(())
+    }
+}
+
+/// A verified proof awaiting consumption. Verification (which rejects invalid or
+/// missing proofs) is separated from consumption (which spends the single-use
+/// `jti`) so a request rejected by later validation never burns a valid proof.
+/// The caller must `consume()` this guard immediately before the gated write.
+/// For off/shadow/inert there is nothing to consume.
+#[must_use = "a verified iCaptcha proof must be consumed before the gated action"]
+pub struct ProofGuard(Option<VerifiedProof>);
+
+impl ProofGuard {
+    /// Spend the proof's `jti` (single-use) and return the verified proof so the
+    /// caller can persist it. A replay is rejected. Returns `None` when there is
+    /// nothing to consume (off/shadow/inert).
+    pub async fn consume(self, db: &crate::db::Db) -> Result<Option<VerifiedProof>, AppError> {
+        match self.0 {
+            Some(p) => {
+                if !db.consume_proof_jti(&p.jti, p.exp).await? {
+                    let (url, level) = url_and_level();
+                    return Err(AppError::IcaptchaProofRequired {
+                        message: "iCaptcha proof already used (replay); solve a fresh challenge"
+                            .to_string(),
+                        url,
+                        level,
+                    });
+                }
+                Ok(Some(p))
+            }
+            None => Ok(None),
+        }
+    }
+}
+
+/// Verify the proof in `headers` belongs to `did`. Rejects missing/invalid
+/// proofs early (enforce mode); off/shadow never reject. Returns a [`ProofGuard`]
+/// the caller must `consume()` right before the gated write. Off/shadow/inert
+/// yield a no-op guard that consumes nothing.
+pub fn verify_request(headers: &HeaderMap, did: &str) -> Result<ProofGuard, AppError> {
+    let v = match VERIFIER.get() {
+        Some(v) => v,
+        None => return Ok(ProofGuard(None)), // not initialized -> inert
+    };
+    match decide(v, headers, did, now_secs()) {
+        Decision::Allow => Ok(ProofGuard(None)),
+        Decision::Reject(reason) => Err(reject_error(v, &reason)),
+        Decision::Consume(proof) => Ok(ProofGuard(Some(proof))),
+    }
+}
+
+fn reject_error(v: &Verifier, reason: &str) -> AppError {
+    AppError::IcaptchaProofRequired {
+        message: format!(
+            "iCaptcha proof required ({reason}). Solve a challenge at {} for level >= {} and resend with the {} header.",
+            v.url, v.required_level, PROOF_HEADER
+        ),
+        url: v.url.clone(),
+        level: v.required_level,
+    }
+}
+
+/// iCaptcha service url + required level for error responses, read from the
+/// initialized verifier (falls back to defaults if somehow uninitialized).
+fn url_and_level() -> (String, u32) {
+    VERIFIER
+        .get()
+        .map(|v| (v.url.clone(), v.required_level))
+        .unwrap_or_else(|| ("https://icaptcha.gitlawb.com".to_string(), 3))
+}
+
+/// Mode-aware decision. Pure and IO-free (no DB; clock injected via `now`) so it
+/// is fully unit-testable. The caller performs jti consumption for `Consume`.
+fn decide(v: &Verifier, headers: &HeaderMap, did: &str, now: i64) -> Decision {
+    if v.mode == Mode::Off {
+        return Decision::Allow;
+    }
+
+    // Fail safe: if no public key could be loaded (e.g. iCaptcha was unreachable
+    // at startup), stay inert rather than rejecting every request. The operator
+    // already saw a startup warning. An iCaptcha hiccup must never break repo
+    // creation or registration.
+    if v.key.is_none() {
+        return Decision::Allow;
+    }
+
+    let token = headers.get(PROOF_HEADER).and_then(|h| h.to_str().ok());
+    let result = match token {
+        Some(t) => verify_token(v, t, did, now, true).map(|claims| (t, claims)),
+        None => Err("missing proof header".to_string()),
+    };
+
+    match result {
+        Ok((token, claims)) => match v.mode {
+            Mode::Enforce => Decision::Consume(VerifiedProof {
+                token: token.to_string(),
+                sub: claims.sub,
+                level: claims.level,
+                jti: claims.jti,
+                exp: claims.exp,
+            }),
+            // Shadow/Off: never reject, and do not consume (observational only).
+            _ => Decision::Allow,
+        },
+        Err(reason) => match v.mode {
+            Mode::Shadow => {
+                tracing::warn!(did = %did, reason, "iCaptcha (shadow) would reject");
+                Decision::Allow
+            }
+            Mode::Enforce => Decision::Reject(reason),
+            Mode::Off => Decision::Allow,
+        },
+    }
+}
+
+/// Header-extracting wrapper over [`verify_token`] (enforces expiry). The
+/// production path inlines this in [`decide`]; retained as the unit-test entry
+/// point that also exercises header extraction.
+#[cfg(test)]
+fn verify(v: &Verifier, headers: &HeaderMap, did: &str, now: i64) -> Result<ProofClaims, String> {
+    let proof = headers
+        .get(PROOF_HEADER)
+        .and_then(|h| h.to_str().ok())
+        .ok_or("missing proof header")?;
+    verify_token(v, proof, did, now, true)
+}
+
+/// Core verification of a raw proof token, separated for testability and reuse.
+/// Checks the Ed25519 signature, the required level, and the DID binding. `exp`
+/// is only enforced when `check_exp` is true: the direct request path enforces
+/// freshness, but the propagation path ([`admit_mirror`]) does not — a proof has
+/// usually expired by the time a repo mirrors, and the origin enforced freshness
+/// at creation. `now` is unix seconds.
+fn verify_token(
+    v: &Verifier,
+    token: &str,
+    did: &str,
+    now: i64,
+    check_exp: bool,
+) -> Result<ProofClaims, String> {
+    let key = v.key.as_ref().ok_or("verifier has no public key")?;
+
+    let (payload, sig_b64) = token.split_once('.').ok_or("malformed proof")?;
+    let sig_bytes = URL_SAFE_NO_PAD
+        .decode(sig_b64)
+        .map_err(|_| "bad signature encoding")?;
+    let sig = Signature::from_slice(&sig_bytes).map_err(|_| "bad signature length")?;
+    key.verify_strict(payload.as_bytes(), &sig)
+        .map_err(|_| "signature verification failed")?;
+
+    let claims_bytes = URL_SAFE_NO_PAD
+        .decode(payload)
+        .map_err(|_| "bad payload encoding")?;
+    let claims: ProofClaims = serde_json::from_slice(&claims_bytes).map_err(|_| "bad claims")?;
+
+    if check_exp && claims.exp < now {
+        return Err("proof expired".to_string());
+    }
+    if claims.level < v.required_level {
+        return Err(format!(
+            "level {} below required {}",
+            claims.level, v.required_level
+        ));
+    }
+    if !crate::api::did_matches(did, &claims.sub) {
+        return Err("proof subject does not match authenticated DID".to_string());
+    }
+    Ok(claims)
+}
+
+/// Outcome of admitting a repo mirrored from a peer.
+#[derive(Debug, PartialEq, Eq)]
+pub enum MirrorAdmission {
+    /// Admit the mirror normally (off/shadow/inert, or a valid proof in enforce).
+    Admit,
+    /// Enforce mode and the mirror's proof is missing/invalid/replayed — mirror
+    /// it but quarantine until an operator releases it. Carries the reason.
+    Quarantine(String),
+}
+
+/// Decide whether to admit a repo being mirrored from a peer, given the proof
+/// token the origin served (`None` if it had none or the fetch failed) and the
+/// mirrored repo's owner DID.
+///
+/// Off/shadow/inert always admit (shadow logs the would-be quarantine and writes
+/// nothing). In enforce mode the proof is re-verified offline against the local
+/// public key — signature, level, and owner-DID binding, but NOT expiry — and
+/// its `jti` is consumed in the local ledger, so one solved challenge admits at
+/// most one mirror per node (a malicious origin cannot reuse one proof to bless
+/// many spam repos here).
+///
+/// LIMITATION (proof is not repo-bound): an iCaptcha proof commits only to the
+/// solver's DID (`sub`), never to a repo — the proof is minted before the repo
+/// exists. So the guarantee enforced here is "a level≥N challenge was solved by
+/// this repo's owner DID", not "the owner intended THIS repo". A malicious origin
+/// that harvests a victim's public proof (served by `get_icaptcha_proof`) can use
+/// it to get ONE spam repo nominally owned by that victim admitted per node — the
+/// per-node `jti` single-use caps the amplification at one repo per distinct
+/// harvested proof, but does not eliminate it. Fully binding a proof to a repo
+/// would require the iCaptcha service to embed a repo/target identifier in the
+/// signed challenge (a protocol change, tracked as future work).
+pub async fn admit_mirror(
+    db: &crate::db::Db,
+    token: Option<&str>,
+    owner_did: &str,
+) -> MirrorAdmission {
+    let v = match VERIFIER.get() {
+        Some(v) => v,
+        None => return MirrorAdmission::Admit, // not initialized -> inert
+    };
+    // Off, or inert because no key could be loaded: admit unconditionally.
+    if v.mode == Mode::Off || v.key.is_none() {
+        return MirrorAdmission::Admit;
+    }
+    let shadow = v.mode == Mode::Shadow;
+
+    // Quarantine in enforce; in shadow just log and admit (observational, no IO).
+    let quarantine = |reason: String| -> MirrorAdmission {
+        if shadow {
+            tracing::warn!(owner = %owner_did, reason, "iCaptcha (shadow) would quarantine mirror");
+            MirrorAdmission::Admit
+        } else {
+            MirrorAdmission::Quarantine(reason)
+        }
+    };
+
+    let token = match token {
+        Some(t) => t,
+        None => return quarantine("origin served no iCaptcha proof".to_string()),
+    };
+
+    match verify_token(v, token, owner_did, now_secs(), false) {
+        Ok(claims) => {
+            if shadow {
+                // Observational: a valid proof would admit. Do not consume, so a
+                // later switch to enforce still sees the jti as fresh.
+                return MirrorAdmission::Admit;
+            }
+            // Retain the replay record on a fixed forward window, NOT the proof's
+            // own (already-past) exp — otherwise the next sweep frees the jti and
+            // the same token could admit another mirror here.
+            let retain_until = now_secs().saturating_add(MIRROR_REPLAY_RETENTION_SECS);
+            match db.consume_proof_jti(&claims.jti, retain_until).await {
+                Ok(true) => MirrorAdmission::Admit,
+                Ok(false) => MirrorAdmission::Quarantine(
+                    "iCaptcha proof already used to admit another mirror".to_string(),
+                ),
+                Err(e) => {
+                    tracing::warn!(owner = %owner_did, err = %e, "iCaptcha mirror ledger error; quarantining");
+                    MirrorAdmission::Quarantine("iCaptcha proof ledger unavailable".to_string())
+                }
+            }
+        }
+        Err(reason) => quarantine(reason),
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    // Real values captured from https://icaptcha.gitlawb.com (a live proof).
+    const PUBKEY_X: &str = "xjyPNqIbvc9U-kwXW6u9mDqRJ7E2UUMOaJdUWhpEXq8";
+    const PROOF: &str = "eyJzdWIiOiJkaWQ6a2V5Onp0ZXN0IiwibGV2ZWwiOjMsImlzcyI6ImljYXB0Y2hhIiwiaWF0IjoxNzgyNTcyODUxLCJleHAiOjE3ODI1NzMxNTEsImp0aSI6IjRiNTIyOGE1YmVkNzEyMmRlZTlmNDdmZiJ9.5UXVPZ8Eo91VnlcvgDXtW-Fx7J2jr7h535SAstQEpigxBr7FF7V6R0XB4PBDgdoBPnhdH_kVEfRPfdHPSdB0CA";
+    const SUB: &str = "did:key:ztest";
+    const IAT: i64 = 1782572851; // within the proof's validity window
+
+    fn verifier(level: u32) -> Verifier {
+        Verifier {
+            mode: Mode::Enforce,
+            url: "https://icaptcha.gitlawb.com".to_string(),
+            required_level: level,
+            key: decode_key(PUBKEY_X),
+        }
+    }
+
+    fn headers_with(proof: &str) -> HeaderMap {
+        let mut h = HeaderMap::new();
+        h.insert(PROOF_HEADER, proof.parse().unwrap());
+        h
+    }
+
+    #[test]
+    fn accepts_a_real_proof() {
+        let v = verifier(3);
+        assert!(verify(&v, &headers_with(PROOF), SUB, IAT).is_ok());
+    }
+
+    #[test]
+    fn rejects_expired_proof() {
+        let v = verifier(3);
+        let err = verify(&v, &headers_with(PROOF), SUB, 9_999_999_999).unwrap_err();
+        assert!(err.contains("expired"), "{err}");
+    }
+
+    #[test]
+    fn rejects_wrong_did() {
+        let v = verifier(3);
+        let err = verify(&v, &headers_with(PROOF), "did:key:zsomeoneelse", IAT).unwrap_err();
+        assert!(err.contains("subject"), "{err}");
+    }
+
+    #[test]
+    fn rejects_insufficient_level() {
+        let v = verifier(5); // proof is level 3
+        let err = verify(&v, &headers_with(PROOF), SUB, IAT).unwrap_err();
+        assert!(err.contains("below required"), "{err}");
+    }
+
+    #[test]
+    fn rejects_tampered_signature() {
+        let v = verifier(3);
+        // Flip one base64url char in the signature so it is guaranteed different.
+        let (payload, sig) = PROOF.split_once('.').unwrap();
+        let mut chars: Vec<char> = sig.chars().collect();
+        chars[0] = if chars[0] == 'A' { 'B' } else { 'A' };
+        let tampered = format!("{}.{}", payload, chars.into_iter().collect::<String>());
+        assert!(verify(&v, &headers_with(&tampered), SUB, IAT).is_err());
+    }
+
+    #[test]
+    fn rejects_missing_header() {
+        let v = verifier(3);
+        let err = verify(&v, &HeaderMap::new(), SUB, IAT).unwrap_err();
+        assert!(err.contains("missing"), "{err}");
+    }
+
+    #[test]
+    fn parse_mode_accepts_documented_values_and_rejects_junk() {
+        assert_eq!(parse_mode(""), Some(Mode::Off));
+        assert_eq!(parse_mode("off"), Some(Mode::Off));
+        assert_eq!(parse_mode("  Shadow "), Some(Mode::Shadow));
+        assert_eq!(parse_mode("ENFORCE"), Some(Mode::Enforce));
+        // Typos must NOT silently disable the gate.
+        assert_eq!(parse_mode("enforced"), None);
+        assert_eq!(parse_mode("on"), None);
+    }
+
+    #[test]
+    fn off_mode_allows_everything() {
+        let mut v = verifier(3);
+        v.mode = Mode::Off;
+        assert!(matches!(
+            decide(&v, &HeaderMap::new(), SUB, IAT),
+            Decision::Allow
+        ));
+    }
+
+    #[test]
+    fn enforce_without_key_stays_inert() {
+        // iCaptcha unreachable at startup -> no key -> must not reject.
+        let v = Verifier {
+            mode: Mode::Enforce,
+            url: "https://icaptcha.gitlawb.com".to_string(),
+            required_level: 3,
+            key: None,
+        };
+        assert!(matches!(
+            decide(&v, &HeaderMap::new(), SUB, IAT),
+            Decision::Allow
+        ));
+    }
+
+    #[test]
+    fn enforce_with_key_rejects_missing_proof() {
+        let v = verifier(3);
+        assert!(matches!(
+            decide(&v, &HeaderMap::new(), SUB, IAT),
+            Decision::Reject(_)
+        ));
+    }
+
+    #[test]
+    fn shadow_allows_despite_bad_proof() {
+        let mut v = verifier(3);
+        v.mode = Mode::Shadow;
+        assert!(matches!(
+            decide(&v, &HeaderMap::new(), SUB, IAT),
+            Decision::Allow
+        ));
+    }
+
+    #[test]
+    fn enforce_valid_proof_requires_consuming_its_jti() {
+        // A verified proof under enforce must yield Consume carrying the jti, so
+        // the caller can spend it once and reject replays.
+        let v = verifier(3);
+        match decide(&v, &headers_with(PROOF), SUB, IAT) {
+            Decision::Consume(p) => {
+                assert_eq!(p.jti, "4b5228a5bed7122dee9f47ff");
+                assert_eq!(p.exp, 1782573151);
+                assert_eq!(p.token, PROOF, "the raw token is retained for persistence");
+                assert_eq!(p.sub, SUB);
+            }
+            other => panic!("expected Consume, got {other:?}"),
+        }
+    }
+
+    #[test]
+    fn propagation_accepts_an_expired_proof() {
+        // The mirror-admission path verifies sig/level/DID but NOT expiry, since a
+        // proof has usually expired by the time a repo propagates. The same proof
+        // that the direct path rejects as expired must verify here.
+        let v = verifier(3);
+        let now = 9_999_999_999; // far past the proof's exp
+        assert!(
+            verify_token(&v, PROOF, SUB, now, true).is_err(),
+            "direct path (check_exp=true) rejects the expired proof"
+        );
+        assert!(
+            verify_token(&v, PROOF, SUB, now, false).is_ok(),
+            "propagation path (check_exp=false) accepts it"
+        );
+    }
+
+    #[test]
+    fn propagation_still_enforces_signature_level_and_did() {
+        let v = verifier(3);
+        // wrong owner DID
+        assert!(verify_token(&v, PROOF, "did:key:zother", IAT, false).is_err());
+        // insufficient level
+        let v5 = verifier(5);
+        assert!(verify_token(&v5, PROOF, SUB, IAT, false).is_err());
+        // tampered signature
+        let (payload, sig) = PROOF.split_once('.').unwrap();
+        let mut chars: Vec<char> = sig.chars().collect();
+        chars[0] = if chars[0] == 'A' { 'B' } else { 'A' };
+        let tampered = format!("{}.{}", payload, chars.into_iter().collect::<String>());
+        assert!(verify_token(&v, &tampered, SUB, IAT, false).is_err());
+    }
+}

crates/gitlawb-node/src/ipfs_pin.rs

@@ -9,6 +9,372 @@
 
 use anyhow::Result;
 use gitlawb_core::cid::Cid;
+use std::time::Duration;
+
+/// Attempts (including the first) for a transient DB-record retry.
+const PIN_RECORD_ATTEMPTS: u32 = 3;
+/// Backoff between DB-record retry attempts.
+const PIN_RECORD_BACKOFF: Duration = Duration::from_millis(50);
+
+/// Run an idempotent DB-record operation with a bounded retry so a sub-second
+/// transient error does not silently leave the pin-source set permanently
+/// incomplete. The resolver treats a nonempty below-cap source set as complete,
+/// so a dropped `record_pin_source`/`record_pinned_cid` makes `GET /ipfs/{cid}`
+/// 404 a valid public copy. Every wrapped insert is idempotent (`ON CONFLICT DO
+/// NOTHING` / provenance-preserving upsert), so re-running is safe. On exhausted
+/// attempts the last error is returned and the caller records the durable
+/// `pin_sources_incomplete` marker (U3, #173), which is what keeps the resolver's
+/// bounded scan fallback available for that object instead of 404ing a public copy.
+/// Shared with the `pinata.rs` twin so both pin paths retry identically. Runs
+/// inside the already-detached post-push task, so the backoff adds no push latency.
+pub(crate) async fn retry_db_record<F, Fut>(mut op: F) -> Result<()>
+where
+    F: FnMut() -> Fut,
+    Fut: std::future::Future<Output = Result<()>>,
+{
+    let mut attempt = 1;
+    loop {
+        match op().await {
+            Ok(()) => return Ok(()),
+            Err(e) => {
+                if attempt >= PIN_RECORD_ATTEMPTS {
+                    return Err(e);
+                }
+                tokio::time::sleep(PIN_RECORD_BACKOFF).await;
+                attempt += 1;
+            }
+        }
+    }
+}
+
+/// Opportunistically repair a legacy provider-CID row on the already-pinned skip
+/// path (#173 R8, KTD8). Releases before this branch stored the PROVIDER CID
+/// (Kubo dag-pb / Pinata CIDv0) in `pinned_cids.cid`; the `/ipfs` resolver
+/// recomputes the raw CID from object bytes and 404s any row whose key does not
+/// match, yet `list_pinned_cids` still advertises the stored key — so a client
+/// gets a CID the resolver deliberately withholds. When a re-push carries the
+/// object again, rewrite the key to the raw CID and stash the old provider value
+/// in `legacy_provider_cid`.
+///
+/// COST GATE: candidacy is decided from the stored key's codec alone — a
+/// CIDv1/raw key is already the resolver key and reads NO bytes, keeping the
+/// steady-state skip cost DB-only. Only a legacy-codec row reads the object to
+/// recompute. A row whose bytes are gone stays withheld (no destructive rewrite).
+async fn repair_legacy_provider_cid(
+    repo_path: &std::path::Path,
+    git_bin: &str,
+    git_timeout: Duration,
+    sha: &str,
+    db: &crate::db::Db,
+) -> Result<RepairOutcome> {
+    let stored = match db.cid_for_oid(sha).await? {
+        Some(c) => c,
+        None => return Ok(RepairOutcome::Settled),
+    };
+    // Cost gate: a canonical raw CIDv1 key is already correct — never read bytes.
+    if gitlawb_core::cid::is_raw_cidv1(&stored) {
+        return Ok(RepairOutcome::Settled);
+    }
+    // Legacy-codec row: read the object to recompute. Counted so a test can prove
+    // the gate above spares non-legacy rows this read.
+    #[cfg(test)]
+    note_legacy_repair_read();
+    // `read_object_bounded` is SYNCHRONOUS `git cat-file`, and its budget is
+    // `git_service_timeout_secs` (600 by default), so running it inline parks a tokio
+    // worker for as long as git takes: one wedged read on the sweep's first pass at boot
+    // holds a worker for ten minutes, per legacy row. Push it to the blocking pool, the
+    // same shape `replication_withheld_set` uses in api/repos.rs (#173 round 11, F4).
+    // Both callers of this function are async, so neither changes shape. The read-counter
+    // increment above stays on THIS thread so the thread_local cost-gate assertion holds.
+    let read = {
+        let repo_path = repo_path.to_path_buf();
+        let git_bin = git_bin.to_string();
+        let sha = sha.to_string();
+        tokio::task::spawn_blocking(move || {
+            crate::git::store::read_object_bounded(&git_bin, &repo_path, &sha, git_timeout)
+        })
+        .await
+    };
+    let data = match read {
+        Ok(Ok(Some((_ty, bytes)))) => bytes,
+        // Bytes gone: the row stays withheld, never destructively rewritten. Nothing a
+        // later pass changes, so this is a TERMINAL outcome for the sweep's re-walk gate.
+        Ok(Ok(None)) => return Ok(RepairOutcome::Settled),
+        // A wedged/D-state `git cat-file` (timeout/infra): the repair is opportunistic
+        // and best-effort, so skip it and return Ok so the pin task PROCEEDS to
+        // requeue_or_release rather than hanging the coalescing key until process death
+        // (grok F2, #173). A later re-push or the deferred sweep retries the repair.
+        Ok(Err(e)) => {
+            tracing::warn!(sha = %sha, err = %e, "skipping legacy provider-CID repair: bounded object read failed");
+            return Ok(RepairOutcome::Retryable);
+        }
+        // The blocking task panicked or was cancelled: same best-effort treatment, and
+        // worth another walk because it says nothing about the row itself.
+        Err(e) => {
+            tracing::warn!(sha = %sha, err = %e, "skipping legacy provider-CID repair: object read task failed");
+            return Ok(RepairOutcome::Retryable);
+        }
+    };
+    let raw = Cid::from_git_object_bytes(&data).to_string();
+    if raw == stored {
+        return Ok(RepairOutcome::Settled);
+    }
+    db.repair_legacy_provider_cid(sha, &raw, &stored).await?;
+    Ok(RepairOutcome::Repaired)
+}
+
+/// What one opportunistic repair did with a row, so the sweep can tell a skip a later
+/// run could fix from one nothing will (U4 re-walk, #173 round 11). The push skip path
+/// ignores the value: it repairs whatever the push happens to carry and a failure there
+/// is already warn-only.
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub(crate) enum RepairOutcome {
+    /// Nothing to do, or nothing a re-walk would change: the stored key is already the
+    /// raw resolver key, the recomputed key matches it, or the object's bytes are gone.
+    Settled,
+    /// The bounded object read failed (a wedged `git cat-file`, an unreadable repo).
+    /// The bytes may be readable later, so the row is worth walking again.
+    Retryable,
+    /// The row's key was rewritten to the raw-content CID.
+    Repaired,
+}
+
+/// What one sweep pass (or a whole sweep run) did. `scanned` counts `pinned_cids`
+/// rows READ, which is the quantity the batch size bounds; `repaired` counts rows
+/// whose key was actually rewritten to the raw CID.
+#[derive(Debug, Default, PartialEq, Eq)]
+pub(crate) struct SweepStats {
+    pub scanned: usize,
+    pub repaired: usize,
+    pub passes: usize,
+    /// Rows left unrepaired for a reason a LATER run could fix (the source repo is not
+    /// on this node's local disk, a DB read failed, a bounded object read failed). A
+    /// nonzero count is what makes the run rewind its cursor instead of parking it at
+    /// the end of the table forever. Rows that are unrepairable in principle (no
+    /// provenance, the repo row is gone, the bytes are gone) are NOT counted here.
+    pub retryable_skips: usize,
+}
+
+/// One bounded pass of the U4 sweep: read at most `batch` `pinned_cids` rows after
+/// the persisted cursor, repair the legacy ones, and persist the new cursor.
+///
+/// The batch is what bounds the pass. It caps rows READ, not rows repaired, because
+/// the legacy predicate is a codec decode SQL cannot express; a table of raw rows
+/// therefore costs one indexed range scan per pass and nothing else.
+///
+/// The cursor advances to the LAST row read whatever happened to each row, including
+/// rows that were skipped as unrepairable. A cursor that only advanced on success
+/// would re-read the same unrepairable row on every pass and the sweep would never
+/// reach the rows behind it.
+async fn sweep_pass(
+    repos_dir: &std::path::Path,
+    git_bin: &str,
+    git_timeout: Duration,
+    batch: i64,
+    db: &crate::db::Db,
+) -> Result<SweepStats> {
+    let cursor = db.pin_repair_cursor().await?;
+    let rows = db.pinned_cids_after(&cursor, batch).await?;
+    let scanned = rows.len();
+    let mut repaired = 0usize;
+    let mut retryable_skips = 0usize;
+    let mut last = cursor;
+
+    for (sha, stored) in rows {
+        // Advance FIRST: every path below this line may skip the row, and none of them
+        // may wedge the walk (scenario 7).
+        last = sha.clone();
+        // Same cost gate as the skip-path repair: a canonical raw CIDv1 key is already
+        // the resolver key, so it reads no bytes and resolves no repo.
+        if gitlawb_core::cid::is_raw_cidv1(&stored) {
+            continue;
+        }
+        // Resolve the row's repo from its recorded provenance (first-pinner plus the
+        // bounded additional source set). An empty set is a pin recorded before
+        // provenance existed: nothing to read the bytes from, so skip it.
+        let sources = match db.pin_sources_for_oid(&sha).await {
+            Ok(s) => s,
+            Err(e) => {
+                tracing::warn!(sha = %sha, err = %e, "sweep: failed to read pin sources");
+                // A DB read error says nothing about the row, so a later run retries it.
+                retryable_skips += 1;
+                continue;
+            }
+        };
+        // Whether this row ended the source walk repaired, and whether anything it hit
+        // along the way was a transient obstacle rather than a permanent one.
+        let mut row_repaired = false;
+        let mut row_retryable = false;
+        for repo_id in sources {
+            let repo = match db.get_repo_by_id(&repo_id).await {
+                Ok(Some(r)) => r,
+                // The repo row is gone: a later source may still hold the bytes. A
+                // deleted repo does not come back, so this is not a retryable skip.
+                Ok(None) => continue,
+                Err(e) => {
+                    tracing::warn!(repo_id = %repo_id, err = %e, "sweep: failed to read repo");
+                    row_retryable = true;
+                    continue;
+                }
+            };
+            // Derive the LOCAL disk path rather than going through `repo_store.acquire`.
+            // The sweep is opportunistic background maintenance over every pinned row on
+            // the node, so it must never pull a cold repo back from remote storage: that
+            // would turn a repair pass into a bulk restore. A repo that is not on local
+            // disk simply reads no bytes here and stays withheld, but it IS a retryable
+            // skip: on a Tigris-backed node the repo is cold now and warm later, and
+            // without the re-walk that row would never be repaired by anything.
+            // The path goes through the repo store's VALIDATED resolver (allowlisted
+            // components, rooted at repos_dir, no ParentDir/CurDir segment), not the raw
+            // join: the sweep is a second caller of that path logic and gets the same
+            // barrier the acquire path has (#173 round 11, F3). It is the non-fetching
+            // variant, so the no-cold-pull property above is untouched.
+            let repo_path = match crate::git::repo_store::validated_repo_disk_path(
+                repos_dir,
+                &repo.owner_did,
+                &repo.name,
+            ) {
+                Ok(p) => p,
+                // An unsafe name is not something a later run fixes, so it is terminal.
+                Err(e) => {
+                    tracing::warn!(repo_id = %repo_id, err = %e, "sweep: rejected unsafe repo path");
+                    continue;
+                }
+            };
+            if !repo_path.is_dir() {
+                row_retryable = true;
+                continue;
+            }
+            match repair_legacy_provider_cid(&repo_path, git_bin, git_timeout, &sha, db).await {
+                Ok(RepairOutcome::Repaired) => {
+                    repaired += 1;
+                    row_repaired = true;
+                    break;
+                }
+                // The bytes could not be read from this source right now: try the next
+                // source, and if none of them works, walk the row again on a later run.
+                Ok(RepairOutcome::Retryable) => row_retryable = true,
+                // Nothing to repair from this source and nothing a re-walk changes.
+                Ok(RepairOutcome::Settled) => {}
+                Err(e) => {
+                    tracing::warn!(sha = %sha, err = %e, "sweep: legacy provider-CID repair failed");
+                    row_retryable = true;
+                }
+            }
+        }
+        if !row_repaired && row_retryable {
+            retryable_skips += 1;
+        }
+    }
+
+    db.set_pin_repair_cursor(&last).await?;
+    Ok(SweepStats {
+        scanned,
+        repaired,
+        passes: 1,
+        retryable_skips,
+    })
+}
+
+/// Test seam for a single bounded pass (scenarios 4 and 5 drive passes by hand to
+/// observe the batch bound and the restart-resumes-from-cursor behavior).
+#[cfg_attr(not(test), allow(dead_code))]
+pub(crate) async fn sweep_legacy_provider_cids_once(
+    repos_dir: &std::path::Path,
+    git_bin: &str,
+    git_timeout: Duration,
+    batch: i64,
+    db: &crate::db::Db,
+) -> Result<SweepStats> {
+    sweep_pass(repos_dir, git_bin, git_timeout, batch, db).await
+}
+
+/// U4 (#173): the one-shot legacy provider-CID migration sweep.
+///
+/// Releases before this branch stored the PROVIDER CID (Kubo dag-pb / Pinata CIDv0)
+/// in `pinned_cids.cid`. This branch's `/ipfs/{cid}` resolver recomputes the raw
+/// content CID and withholds any row whose key does not match, so those rows are
+/// unresolvable. The opportunistic repair on the already-pinned skip path only fires
+/// when a later push re-carries the object, and normal git negotiation omits objects
+/// the node already has, so on an upgraded node that push generally never comes. This
+/// walks the table instead.
+///
+/// Runs until a pass comes back short of a full batch, which is the end of the table.
+/// Sleeps `delay` between full batches so it cannot monopolize the DB, and persists
+/// its cursor every pass so a restart continues instead of rewinding. Errors reading
+/// or repairing an individual row are warn-and-skip; only a failure of the batch query
+/// or the cursor write ends the run, and a later run picks up from the stored cursor.
+///
+/// A run that skipped at least one RETRYABLE row rewinds the cursor to the start of the
+/// table on its way out (#173 round 11). Without that the cursor parked at the maximum
+/// `sha256_hex` for good: every later boot read zero rows, so a row skipped for a
+/// transient reason (its repo cold on a Tigris-backed node, a DB or object read error)
+/// was skipped permanently, unadvertised and unresolvable with nothing left to fix it.
+/// The rewind is a per-RUN decision made after the walk has already finished, never
+/// mid-walk, so it cannot spin: the cost is one extra ordered scan on the next run, and
+/// a row that is unrepairable in principle (bytes gone, provenance gone) does not count
+/// as retryable, so a node holding one does not re-walk on every boot forever.
+pub(crate) async fn sweep_legacy_provider_cids(
+    repos_dir: &std::path::Path,
+    git_bin: &str,
+    git_timeout: Duration,
+    batch: i64,
+    delay: Duration,
+    db: &crate::db::Db,
+) -> SweepStats {
+    let mut totals = SweepStats::default();
+    loop {
+        let pass = match sweep_pass(repos_dir, git_bin, git_timeout, batch, db).await {
+            Ok(p) => p,
+            Err(e) => {
+                tracing::warn!(err = %e, "legacy provider-CID sweep pass failed; stopping");
+                break;
+            }
+        };
+        totals.scanned += pass.scanned;
+        totals.repaired += pass.repaired;
+        totals.retryable_skips += pass.retryable_skips;
+        totals.passes += 1;
+        // A short batch means the ordered walk reached the end of the table. Stop here
+        // rather than after an extra empty pass, and do NOT sleep on the way out.
+        if (pass.scanned as i64) < batch {
+            break;
+        }
+        tokio::time::sleep(delay).await;
+    }
+    if totals.retryable_skips > 0 {
+        if let Err(e) = db.set_pin_repair_cursor("").await {
+            tracing::warn!(err = %e, "failed to rewind the legacy provider-CID sweep cursor");
+        }
+    }
+    totals
+}
+
+// Test-only cost-gate counter (R8, U7): how many times the opportunistic repair
+// read an object's bytes on the skip path. The codec gate must spare a CIDv1/raw
+// row this read; the counter is the both-ways guard (removing the gate reads the
+// raw row and increments it). Same thread_local discipline as the serve-path
+// oversize counter — the pin tests await `pin_new_objects` on a current-thread
+// runtime, so the increment and the assertion share one thread.
+#[cfg(test)]
+thread_local! {
+    static LEGACY_REPAIR_READS: std::cell::Cell<usize> = const { std::cell::Cell::new(0) };
+}
+
+#[cfg(test)]
+pub(crate) fn reset_legacy_repair_reads() {
+    LEGACY_REPAIR_READS.with(|c| c.set(0));
+}
+
+#[cfg(test)]
+pub(crate) fn legacy_repair_reads() -> usize {
+    LEGACY_REPAIR_READS.with(|c| c.get())
+}
+
+#[cfg(test)]
+fn note_legacy_repair_read() {
+    LEGACY_REPAIR_READS.with(|c| c.set(c.get() + 1));
+}
 
 /// Pin a single git object to the local IPFS/Kubo node.
 ///
@@ -63,41 +429,102 @@ pub async fn pin_git_object(ipfs_api: &str, sha256_hex: &str, data: &[u8]) -> Re
             let v: serde_json::Value = serde_json::from_str(line).ok()?;
             v["Hash"].as_str().map(|s| s.to_string())
         })
-        .last()
+        .next_back()
         .unwrap_or(expected_cid.clone());
 
     tracing::debug!(sha256 = %sha256_hex, %cid, "pinned git object to IPFS");
     Ok(cid)
 }
 
-/// List all git objects in the given bare repo and pin any that are not yet
-/// recorded in `pinned_cids`.
+/// Fetch raw bytes for a CID from the local Kubo node (`/api/v0/cat`).
+pub async fn cat(ipfs_api: &str, cid: &str) -> Result<Vec<u8>> {
+    if ipfs_api.is_empty() {
+        return Err(anyhow::anyhow!("IPFS not configured"));
+    }
+    let url = format!("{}/api/v0/cat?arg={}", ipfs_api.trim_end_matches('/'), cid);
+    let resp = reqwest::Client::new().post(&url).send().await?;
+    if !resp.status().is_success() {
+        return Err(anyhow::anyhow!("ipfs cat {cid}: {}", resp.status()));
+    }
+    Ok(resp.bytes().await?.to_vec())
+}
+
+/// Pin any of the given candidate git objects that are not yet recorded in
+/// `pinned_cids`.
+///
+/// `object_list` is the already-withheld-filtered OID set to pin: the caller
+/// applies `visibility_pack::replicable_objects` on the delta path or the
+/// `..._fail_closed` filter on the full-scan path before calling, so this
+/// function never sees a withheld blob. `repo_path` is still needed to read each
+/// object's bytes. The twin in `pinata.rs` mirrors this shape — change both in
+/// lockstep. `repo_id` records the pin's provenance so `GET /ipfs/{cid}` resolves
+/// straight to this repo instead of scanning every repo (#173).
 ///
 /// Returns a list of `(sha256_hex, cid)` pairs for objects pinned this call.
 pub async fn pin_new_objects(
     ipfs_api: &str,
     repo_path: &std::path::Path,
+    git_bin: &str,
+    git_timeout: Duration,
+    object_list: Vec<String>,
     db: &crate::db::Db,
+    repo_id: &str,
 ) -> Vec<(String, String)> {
     if ipfs_api.is_empty() {
         return vec![];
     }
 
-    // Enumerate all objects in the repo
-    let object_list = match list_all_objects(repo_path) {
-        Ok(v) => v,
-        Err(e) => {
-            tracing::warn!(repo = %repo_path.display(), err = %e, "failed to list git objects for IPFS pinning");
-            return vec![];
-        }
-    };
-
     let mut pinned = Vec::new();
 
     for sha in object_list {
-        // Skip if already pinned
+        // Skip if already pinned — but first backfill provenance if the existing
+        // pin has none. A legacy pin (recorded before repo_id existed, #173, jatmn)
+        // is skipped here before record_pinned_cid ever runs, so its NULL provenance
+        // would never resolve to one repo and known CIDs keep hitting the scan. The
+        // backfill only sets repo_id (AND repo_id IS NULL guard preserves
+        // first-pinner-owns) and never re-pins the bytes — the object is already on IPFS.
         match db.is_pinned(&sha).await {
-            Ok(true) => continue,
+            Ok(true) => {
+                match db.provenance_for_oid(&sha).await {
+                    Ok(None) => {
+                        if let Err(e) = db.backfill_pin_provenance(&sha, repo_id).await {
+                            tracing::warn!(sha = %sha, err = %e, "failed to backfill pin provenance");
+                        }
+                    }
+                    Ok(Some(_)) => {}
+                    Err(e) => {
+                        tracing::warn!(sha = %sha, err = %e, "DB error reading pin provenance");
+                    }
+                }
+                // F1 (#173 round 8): record this repo as an ADDITIONAL source for the
+                // already-pinned object. This is the load-bearing skip-branch insert —
+                // a later repo pushing a shared object hits this path (already pinned),
+                // and without it `GET /ipfs/{cid}` only ever knows the first pinner, so a
+                // shared object first pinned from a private/quarantined repo 404s even
+                // when this repo would serve it. Bounded per object (MAX_PIN_SOURCES).
+                if let Err(e) = retry_db_record(|| db.record_pin_source(&sha, repo_id)).await {
+                    tracing::warn!(sha = %sha, err = %e, "failed to record pin source");
+                    // U3 (#173): the retries are spent and this repo is NOT in the source
+                    // set, so the set is known incomplete. Persist that, or the resolver
+                    // reads a non-empty below-cap set as COMPLETE and 404s an object this
+                    // repo would serve. Warn-only in turn: if the marker write also fails
+                    // the object degrades to the pre-U3 behavior, never worse.
+                    if let Err(e) = db.mark_pin_sources_incomplete(&sha).await {
+                        tracing::warn!(sha = %sha, err = %e, "failed to mark pin sources incomplete");
+                    }
+                }
+                // R8 (#173 round 10): opportunistically repair a legacy provider-CID
+                // row (Kubo dag-pb / Pinata) to the raw-content resolver key on this
+                // re-push. Cost-gated on the stored key's codec — a non-legacy row
+                // reads no bytes. Warn-only: a failure leaves the row as-is for a
+                // later re-push or the deferred one-shot sweep.
+                if let Err(e) =
+                    repair_legacy_provider_cid(repo_path, git_bin, git_timeout, &sha, db).await
+                {
+                    tracing::warn!(sha = %sha, err = %e, "failed to repair legacy provider CID");
+                }
+                continue;
+            }
             Ok(false) => {}
             Err(e) => {
                 tracing::warn!(sha = %sha, err = %e, "DB error checking pinned status");
@@ -105,22 +532,49 @@ pub async fn pin_new_objects(
             }
         }
 
-        // Read raw object content
-        let data = match crate::git::store::read_object(repo_path, &sha) {
-            Ok(Some((_obj_type, bytes))) => bytes,
-            Ok(None) => continue,
-            Err(e) => {
-                tracing::warn!(sha = %sha, err = %e, "failed to read git object for pinning");
-                continue;
-            }
-        };
+        // Read raw object content under a bounded read so a wedged/D-state `git
+        // cat-file` (stuck NFS/Tigris backend) is reaped at `git_timeout` instead of
+        // hanging pin_new_objects forever — which would pin the post-push coalescing
+        // key until process death (grok F2, #173). On Err the object is simply not
+        // pinned this pass; a later pass/push retries.
+        let data =
+            match crate::git::store::read_object_bounded(git_bin, repo_path, &sha, git_timeout) {
+                Ok(Some((_obj_type, bytes))) => bytes,
+                Ok(None) => continue,
+                Err(e) => {
+                    tracing::warn!(sha = %sha, err = %e, "failed to read git object for pinning");
+                    continue;
+                }
+            };
 
         // Pin to IPFS
         match pin_git_object(ipfs_api, &sha, &data).await {
             Ok(cid) if !cid.is_empty() => {
-                if let Err(e) = db.record_pinned_cid(&sha, &cid).await {
+                // The resolver key (`pinned_cids.cid`) must be the locally-computed
+                // raw-content CID, never the provider Hash: Kubo returns a dag-pb/UnixFS
+                // root for objects above its block size, which does not hash the raw
+                // content, so `GET /ipfs/{provider_cid}` would resolve then fail the F2
+                // integrity check (list-then-404). The serve path reads bytes from git and
+                // verifies them against the requested CID, so the raw CID is the correct
+                // key. Mirrors the pinata twin, which already records the raw CID.
+                let raw_cid = gitlawb_core::cid::Cid::from_git_object_bytes(&data).to_string();
+                // F1 (#173 round 8): the first pinner is recorded in pin_repo_sources too,
+                // so every source (first and subsequent) is tried uniformly by the
+                // resolver. U3 (#173): the pin and its source go down in ONE transaction.
+                // As two independent best-effort calls this path could land the pin while
+                // dropping its own source, producing a source set silently missing its
+                // first pinner; atomically there is no such window, and a total failure
+                // leaves the object unpinned so the next push retries the whole thing.
+                if let Err(e) =
+                    retry_db_record(|| db.record_pinned_cid_with_source(&sha, &raw_cid, repo_id))
+                        .await
+                {
                     tracing::warn!(sha = %sha, err = %e, "failed to record pinned CID in DB");
                 }
+                // Return the provider Hash (not the resolver key), mirroring the pinata
+                // twin's contract: the DB `cid` is the raw resolver key (recorded above),
+                // the returned value is the provider CID. Here the return is consumed only
+                // for logging, but keeping the twins structurally identical avoids drift.
                 pinned.push((sha, cid));
             }
             Ok(_) => {}
@@ -133,30 +587,91 @@ pub async fn pin_new_objects(
     pinned
 }
 
-/// Run `git cat-file --batch-all-objects --batch-check='%(objectname)'`
-/// to get all object SHA-256 hashes in the repository.
-fn list_all_objects(repo_path: &std::path::Path) -> Result<Vec<String>> {
-    let output = std::process::Command::new("git")
-        .args([
-            "cat-file",
-            "--batch-all-objects",
-            "--batch-check=%(objectname)",
-        ])
-        .current_dir(repo_path)
-        .output()
-        .map_err(|e| anyhow::anyhow!("failed to run git cat-file: {e}"))?;
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use std::cell::Cell;
 
-    if !output.status.success() {
-        let stderr = String::from_utf8_lossy(&output.stderr);
-        return Err(anyhow::anyhow!("git cat-file failed: {stderr}"));
+    // The retry helper is the load-bearing unit: it converts a sub-second
+    // transient DB error at the three warn-only record sites into a landed row,
+    // instead of a permanently incomplete pin-source set. These drive the helper
+    // directly against a controlled closure (the record sites take a concrete
+    // `&Db` over a `PgPool`, so a failing-first wrapper cannot slot in without
+    // changing signatures — see U6 seam note).
+
+    #[tokio::test]
+    async fn retry_lands_after_transient_failures() {
+        let calls = Cell::new(0u32);
+        let result = retry_db_record(|| {
+            let n = calls.get() + 1;
+            calls.set(n);
+            async move {
+                if n < PIN_RECORD_ATTEMPTS {
+                    Err(anyhow::anyhow!("transient failure on attempt {n}"))
+                } else {
+                    Ok(())
+                }
+            }
+        })
+        .await;
+
+        assert!(
+            result.is_ok(),
+            "retry lands the row after transient failures"
+        );
+        assert_eq!(
+            calls.get(),
+            PIN_RECORD_ATTEMPTS,
+            "op is retried until it succeeds"
+        );
     }
 
-    let stdout = String::from_utf8_lossy(&output.stdout);
-    let hashes = stdout
-        .lines()
-        .map(|l| l.trim().to_string())
-        .filter(|l| !l.is_empty())
-        .collect();
+    #[tokio::test]
+    async fn retry_returns_last_err_after_exhaustion() {
+        let calls = Cell::new(0u32);
+        let result = retry_db_record(|| {
+            let n = calls.get() + 1;
+            calls.set(n);
+            async move { Err::<(), _>(anyhow::anyhow!("attempt {n} failed")) }
+        })
+        .await;
 
-    Ok(hashes)
+        let err = result.expect_err("all attempts fail so the last error surfaces");
+        assert_eq!(
+            calls.get(),
+            PIN_RECORD_ATTEMPTS,
+            "attempts are bounded to the cap"
+        );
+        assert_eq!(
+            err.to_string(),
+            "attempt 3 failed",
+            "the LAST error is returned, not the first"
+        );
+    }
+
+    // Happy path against a real DB: a single-attempt success lands the row, and a
+    // redundant call is idempotent (`ON CONFLICT DO NOTHING`), so the source set
+    // holds exactly one row.
+    #[sqlx::test]
+    async fn retry_records_pin_source_once(pool: sqlx::PgPool) {
+        let db = crate::db::Db::for_testing(pool);
+        db.run_migrations().await.unwrap();
+
+        let sha = "a".repeat(64);
+        let repo_id = "repo-retry-1";
+
+        retry_db_record(|| db.record_pin_source(&sha, repo_id))
+            .await
+            .expect("happy-path record succeeds in one attempt");
+        retry_db_record(|| db.record_pin_source(&sha, repo_id))
+            .await
+            .expect("a redundant record is idempotent");
+
+        let sources = db.pin_sources_for_oid(&sha).await.unwrap();
+        assert_eq!(
+            sources,
+            vec![repo_id.to_string()],
+            "exactly one source row lands under ON CONFLICT DO NOTHING"
+        );
+    }
 }

crates/gitlawb-node/src/metrics.rs

@@ -0,0 +1,352 @@
+//! Prometheus metrics for the gitlawb node.
+//!
+//! Exposes a small, deliberately conservative set of counters and histograms
+//! that cover the questions an operator actually asks of a live node:
+//!
+//!   * is push traffic flowing? — `gitlawb_pushes_total`
+//!   * is fetch traffic flowing? — `gitlawb_fetches_total`
+//!   * are signature checks passing or failing? —
+//!     `gitlawb_auth_successes_total` / `gitlawb_auth_failures_total`
+//!   * is the sync worker making progress? —
+//!     `gitlawb_sync_queue_processed_total{status}`
+//!   * are webhooks reaching their endpoints? —
+//!     `gitlawb_webhook_deliveries_total{result}`
+//!   * how big are the packs we're sending and receiving? —
+//!     `gitlawb_pack_size_bytes`
+//!   * a single `gitlawb_info{version, did}` gauge = 1, for joins/dashboards
+//!   * currently-connected peer count — `gitlawb_peers_connected`
+//!
+//! All metrics live in a single process-wide registry initialized by
+//! [`init`]. Increment helpers (`record_push`, `record_auth_failure`, ...)
+//! are no-ops until [`init`] has been called, so unit tests and benchmarks
+//! that don't go through `main()` don't need to do anything special.
+//!
+//! The endpoint is opt-in via `GITLAWB_METRICS_ADDR`; if unset, no listener
+//! is bound and no exposition happens. Increments are atomic and effectively
+//! free.
+//!
+//! Follow-ups (not in this module):
+//!   * per-route latency histograms (TraceLayer already gives us spans)
+//!   * per-peer p2p counters
+//!   * ipfs / pinata counters
+
+use std::sync::OnceLock;
+
+use prometheus::{
+    Encoder, Histogram, HistogramOpts, IntCounterVec, IntGauge, IntGaugeVec, Opts, Registry,
+    TextEncoder,
+};
+
+/// The single, process-wide metrics registry. Initialized by [`init`].
+/// Wrapped in `OnceLock` so unit tests can run without going through
+/// `main()` — the public `record_*` helpers treat an uninitialized
+/// registry as a silent no-op.
+static REGISTRY: OnceLock<Registry> = OnceLock::new();
+static INFO: OnceLock<IntGaugeVec> = OnceLock::new();
+static PUSHES: OnceLock<IntCounterVec> = OnceLock::new();
+static FETCHES: OnceLock<IntCounterVec> = OnceLock::new();
+static AUTH_SUCCESSES: OnceLock<IntCounterVec> = OnceLock::new();
+static AUTH_FAILURES: OnceLock<IntCounterVec> = OnceLock::new();
+static SYNC_PROCESSED: OnceLock<IntCounterVec> = OnceLock::new();
+static WEBHOOK_DELIVERIES: OnceLock<IntCounterVec> = OnceLock::new();
+static PACK_SIZE: OnceLock<Histogram> = OnceLock::new();
+static PEERS_CONNECTED: OnceLock<IntGauge> = OnceLock::new();
+
+/// One-time initializer. Builds the registry, registers every metric,
+/// and sets the constant `gitlawb_info` gauge. Idempotent — calling
+/// more than once is a silent no-op. MUST be called from `main()` after
+/// the node DID is known.
+pub fn init(version: &str, node_did: &str) {
+    if REGISTRY.get().is_some() {
+        return;
+    }
+
+    let registry = Registry::new();
+
+    let info = IntGaugeVec::new(
+        Opts::new(
+            "gitlawb_info",
+            "Constant 1 labelled with version and node DID",
+        ),
+        &["version", "did"],
+    )
+    .expect("gitlawb_info metric definition");
+    registry
+        .register(Box::new(info.clone()))
+        .expect("register gitlawb_info");
+    info.with_label_values(&[version, node_did]).set(1);
+    INFO.set(info).expect("set INFO once");
+
+    let pushes = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_pushes_total",
+            "Total successful git push (receive-pack) completions",
+        ),
+        &["repo"],
+    )
+    .expect("gitlawb_pushes_total definition");
+    registry
+        .register(Box::new(pushes.clone()))
+        .expect("register gitlawb_pushes_total");
+    PUSHES.set(pushes).expect("set PUSHES once");
+
+    let fetches = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_fetches_total",
+            "Total successful git fetch (upload-pack) completions",
+        ),
+        &["repo"],
+    )
+    .expect("gitlawb_fetches_total definition");
+    registry
+        .register(Box::new(fetches.clone()))
+        .expect("register gitlawb_fetches_total");
+    FETCHES.set(fetches).expect("set FETCHES once");
+
+    let auth_successes = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_auth_successes_total",
+            "Total HTTP signature checks that passed",
+        ),
+        &["route"],
+    )
+    .expect("gitlawb_auth_successes_total definition");
+    registry
+        .register(Box::new(auth_successes.clone()))
+        .expect("register gitlawb_auth_successes_total");
+    AUTH_SUCCESSES
+        .set(auth_successes)
+        .expect("set AUTH_SUCCESSES once");
+
+    let auth_failures = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_auth_failures_total",
+            "Total HTTP signature checks that failed",
+        ),
+        &["route", "reason"],
+    )
+    .expect("gitlawb_auth_failures_total definition");
+    registry
+        .register(Box::new(auth_failures.clone()))
+        .expect("register gitlawb_auth_failures_total");
+    AUTH_FAILURES
+        .set(auth_failures)
+        .expect("set AUTH_FAILURES once");
+
+    let sync_processed = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_sync_queue_processed_total",
+            "Total sync_queue items the worker has processed",
+        ),
+        &["status"],
+    )
+    .expect("gitlawb_sync_queue_processed_total definition");
+    registry
+        .register(Box::new(sync_processed.clone()))
+        .expect("register gitlawb_sync_queue_processed_total");
+    SYNC_PROCESSED
+        .set(sync_processed)
+        .expect("set SYNC_PROCESSED once");
+
+    let webhook_deliveries = IntCounterVec::new(
+        Opts::new(
+            "gitlawb_webhook_deliveries_total",
+            "Total webhook delivery attempts and their outcomes",
+        ),
+        &["result"],
+    )
+    .expect("gitlawb_webhook_deliveries_total definition");
+    registry
+        .register(Box::new(webhook_deliveries.clone()))
+        .expect("register gitlawb_webhook_deliveries_total");
+    WEBHOOK_DELIVERIES
+        .set(webhook_deliveries)
+        .expect("set WEBHOOK_DELIVERIES once");
+
+    let pack_size = Histogram::with_opts(
+        HistogramOpts::new(
+            "gitlawb_pack_size_bytes",
+            "Distribution of git pack body sizes processed (bytes)",
+        )
+        .buckets(vec![
+            1_024.0,         // 1 KB
+            64_000.0,        // ~64 KB
+            1_000_000.0,     // 1 MB
+            16_000_000.0,    // 16 MB
+            64_000_000.0,    // 64 MB
+            256_000_000.0,   // 256 MB
+            1_073_741_824.0, // 1 GiB
+            2_147_483_648.0, // 2 GiB (current cap)
+        ]),
+    )
+    .expect("gitlawb_pack_size_bytes definition");
+    registry
+        .register(Box::new(pack_size.clone()))
+        .expect("register gitlawb_pack_size_bytes");
+    PACK_SIZE.set(pack_size).expect("set PACK_SIZE once");
+
+    let peers_connected = IntGauge::with_opts(Opts::new(
+        "gitlawb_peers_connected",
+        "Currently connected libp2p peers",
+    ))
+    .expect("gitlawb_peers_connected definition");
+    registry
+        .register(Box::new(peers_connected.clone()))
+        .expect("register gitlawb_peers_connected");
+    PEERS_CONNECTED
+        .set(peers_connected)
+        .expect("set PEERS_CONNECTED once");
+
+    REGISTRY
+        .set(registry)
+        .expect("set REGISTRY once (init must be called exactly once)");
+}
+
+/// Record one successful push (receive-pack completion). Labelled with
+/// the repo in the form `owner_short/repo_name`. No-op if `init` was
+/// never called (e.g. inside a unit test that doesn't go through main).
+pub fn record_push(repo: &str) {
+    if let Some(c) = PUSHES.get() {
+        c.with_label_values(&[repo]).inc();
+    }
+}
+
+/// Record one successful fetch (upload-pack completion).
+pub fn record_fetch(repo: &str) {
+    if let Some(c) = FETCHES.get() {
+        c.with_label_values(&[repo]).inc();
+    }
+}
+
+/// Record one HTTP signature check that passed.
+#[allow(dead_code)] // wired in a follow-up; helpers are part of the public metrics surface
+pub fn record_auth_success(route: &str) {
+    if let Some(c) = AUTH_SUCCESSES.get() {
+        c.with_label_values(&[route]).inc();
+    }
+}
+
+/// Record one HTTP signature check that failed. `reason` is a short,
+/// machine-friendly token (e.g. `expired`, `bad_signature`, `missing_header`).
+#[allow(dead_code)] // wired in a follow-up; helpers are part of the public metrics surface
+pub fn record_auth_failure(route: &str, reason: &str) {
+    if let Some(c) = AUTH_FAILURES.get() {
+        c.with_label_values(&[route, reason]).inc();
+    }
+}
+
+/// Record one sync_queue item outcome. `status` ∈ {done, failed, skipped}.
+pub fn record_sync_processed(status: &str) {
+    if let Some(c) = SYNC_PROCESSED.get() {
+        c.with_label_values(&[status]).inc();
+    }
+}
+
+/// Record one webhook delivery attempt outcome. `result` ∈
+/// {ok, http_error, network_error, skipped}.
+pub fn record_webhook_delivery(result: &str) {
+    if let Some(c) = WEBHOOK_DELIVERIES.get() {
+        c.with_label_values(&[result]).inc();
+    }
+}
+
+/// Record a pack body size observation (bytes).
+pub fn observe_pack_size(bytes: f64) {
+    if let Some(h) = PACK_SIZE.get() {
+        h.observe(bytes);
+    }
+}
+
+/// Update the currently-connected peer count gauge.
+pub fn set_peers_connected(count: i64) {
+    if let Some(g) = PEERS_CONNECTED.get() {
+        g.set(count);
+    }
+}
+
+/// Encode the registry as the standard Prometheus text exposition format.
+/// Returns an error if `init` was never called.
+pub fn encode() -> Result<String, prometheus::Error> {
+    let registry = REGISTRY
+        .get()
+        .ok_or_else(|| prometheus::Error::Msg("metrics::init() was never called".into()))?;
+    let metric_families = registry.gather();
+    let mut buf = Vec::new();
+    let encoder = TextEncoder::new();
+    encoder.encode(&metric_families, &mut buf)?;
+    String::from_utf8(buf)
+        .map_err(|e| prometheus::Error::Msg(format!("non-UTF8 in metric buffer: {e}")))
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    // Note: these tests are not run in parallel by default (cargo runs
+    // tests in a binary in parallel via threads but the OnceLock guard
+    // means only the first init() call succeeds; subsequent ones are
+    // no-ops). The encode test below is structured so it's safe to run
+    // alongside other tests in the same binary.
+
+    #[test]
+    fn encode_after_init_returns_prometheus_text() {
+        // Reset is not supported by OnceLock, so this test relies on
+        // either being the first to run, or `init` being a no-op on
+        // second call. Both paths are exercised: if init() was already
+        // called by another test, the no-op branch still leaves the
+        // registry usable.
+        init("0.0.0-test", "did:key:test");
+        PUSHES
+            .get()
+            .expect("PUSHES set after init")
+            .with_label_values(&["alice/repo"])
+            .inc();
+
+        let body = encode().expect("encode should succeed after init");
+        assert!(
+            body.contains("# HELP gitlawb_info"),
+            "expected gitlawb_info HELP line in: {body}"
+        );
+        assert!(
+            body.contains("# TYPE gitlawb_pushes_total counter"),
+            "expected gitlawb_pushes_total TYPE line in: {body}"
+        );
+        assert!(
+            body.contains("gitlawb_pushes_total{repo=\"alice/repo\"} 1"),
+            "expected the incremented counter to be visible in: {body}"
+        );
+    }
+
+    #[test]
+    fn record_helpers_are_noops_before_init() {
+        // These don't panic. They also don't show up in encode() output
+        // because the registry doesn't exist yet.
+        record_push("test/repo");
+        record_fetch("test/repo");
+        record_auth_success("test/route");
+        record_auth_failure("test/route", "test_reason");
+        record_sync_processed("done");
+        record_webhook_delivery("ok");
+        observe_pack_size(1024.0);
+        set_peers_connected(0);
+    }
+
+    #[test]
+    fn encode_before_init_returns_error() {
+        // encode() must error rather than panic if init() was never called.
+        // This test is meaningful only if NO other test in this binary
+        // ran first. cargo runs tests on multiple threads within a
+        // single binary, so this is racy — but worst case the assertion
+        // below is "encode succeeded with a non-empty body", which is
+        // still a valid state.
+        let result = encode();
+        match result {
+            Err(_) => { /* expected when init wasn't called */ }
+            Ok(body) => {
+                // Some other test ran init() first; that's fine, the
+                // body should still be a valid exposition payload.
+                assert!(!body.is_empty(), "non-empty exposition body");
+            }
+        }
+    }
+}

crates/gitlawb-node/src/operator.rs

@@ -129,9 +129,7 @@ impl OperatorClient {
             .rpc_url
             .parse()
             .with_context(|| format!("invalid RPC URL: {}", self.cfg.rpc_url))?;
-        let provider = ProviderBuilder::new()
-            .wallet(wallet)
-            .connect_http(rpc_url);
+        let provider = ProviderBuilder::new().wallet(wallet).connect_http(rpc_url);
         let contract = IGitlawbNodeStaking::new(self.cfg.contract_address, provider);
 
         let pending = contract
@@ -147,8 +145,12 @@ impl OperatorClient {
     }
 
     /// Spawn a background task that posts a heartbeat on `heartbeat_interval` cadence.
-    /// Errors are logged and retried on the next tick.
-    pub fn spawn_heartbeat_loop(self: Arc<Self>) {
+    /// Errors are logged and retried on the next tick. The task exits cleanly
+    /// when `shutdown_rx` flips to `true`.
+    pub fn spawn_heartbeat_loop(
+        self: Arc<Self>,
+        mut shutdown_rx: tokio::sync::watch::Receiver<bool>,
+    ) {
         let interval_secs = self.cfg.heartbeat_interval.as_secs();
         info!(
             interval_hours = interval_secs / 3600,
@@ -160,11 +162,20 @@ impl OperatorClient {
             // First tick fires immediately — use it to send an initial heartbeat
             interval.tick().await;
             loop {
-                match self.send_heartbeat().await {
-                    Ok(tx) => info!(tx = %tx, "operator heartbeat sent"),
-                    Err(e) => warn!(err = %e, "operator heartbeat failed — will retry"),
+                tokio::select! {
+                    _ = interval.tick() => {
+                        match self.send_heartbeat().await {
+                            Ok(tx) => info!(tx = %tx, "operator heartbeat sent"),
+                            Err(e) => warn!(err = %e, "operator heartbeat failed — will retry"),
+                        }
+                    }
+                    _ = shutdown_rx.changed() => {
+                        if *shutdown_rx.borrow() {
+                            info!("operator heartbeat loop: shutdown signal received, exiting");
+                            return;
+                        }
+                    }
                 }
-                interval.tick().await;
             }
         });
     }

crates/gitlawb-node/src/p2p/mod.rs

@@ -3,26 +3,24 @@
 //! Provides:
 //!   - Peer discovery via Kademlia DHT (DID → multiaddr mapping)
 //!   - Real-time ref-update events via Gossipsub
-//!   - Local network discovery via mDNS
 //!
 //! The node's PeerId is derived from its Ed25519 identity keypair,
 //! so the gitlawb DID and libp2p PeerId share the same key.
 
-use std::collections::{HashMap, hash_map::DefaultHasher};
+use std::collections::{hash_map::DefaultHasher, HashMap};
 use std::hash::{Hash, Hasher};
 use std::sync::Arc;
 use std::time::Duration;
 
 use anyhow::Result;
 use chrono::Utc;
-use libp2p::futures::StreamExt;
-use libp2p::{
-    gossipsub, identify, kad,
-    mdns,
-    noise, tcp, yamux,
-    swarm::{NetworkBehaviour, SwarmEvent},
-    Multiaddr, PeerId,
-};
+use futures::StreamExt;
+use libp2p_core::{muxing::StreamMuxerBox, Multiaddr, PeerId, Transport};
+use libp2p_gossipsub as gossipsub;
+use libp2p_identify as identify;
+use libp2p_identity as identity;
+use libp2p_kad as kad;
+use libp2p_swarm::{NetworkBehaviour, Swarm, SwarmEvent};
 use tokio::sync::{mpsc, oneshot};
 use tracing::{debug, info, warn};
 use uuid::Uuid;
@@ -65,6 +63,15 @@ pub struct DidRecord {
     pub timestamp: String,
 }
 
+/// Snapshot of the libp2p swarm state for observability.
+#[derive(Debug, Clone, serde::Serialize)]
+pub struct SwarmStatus {
+    pub connected_peers: usize,
+    pub gossipsub_mesh_peers: usize,
+    pub gossipsub_all_peers: usize,
+    pub listen_addrs: Vec<String>,
+}
+
 /// Commands sent to the swarm task from the rest of the node.
 #[derive(Debug)]
 pub enum P2pCommand {
@@ -79,7 +86,12 @@ pub enum P2pCommand {
     /// Store a DID record in the Kademlia DHT (fire-and-forget)
     PutDid(DidRecord),
     /// Look up a DID in the Kademlia DHT; reply on the oneshot sender
-    GetDid { did: String, reply: oneshot::Sender<Option<DidRecord>> },
+    GetDid {
+        did: String,
+        reply: oneshot::Sender<Option<DidRecord>>,
+    },
+    /// Get a snapshot of the swarm status
+    GetStatus { reply: oneshot::Sender<SwarmStatus> },
 }
 
 /// Handle returned to the rest of the node for sending commands to the swarm.
@@ -96,7 +108,10 @@ impl P2pHandle {
 
     #[allow(dead_code)]
     pub async fn add_peer(&self, peer_id: PeerId, addr: Multiaddr) {
-        let _ = self.tx.send(P2pCommand::AddKnownPeer { peer_id, addr }).await;
+        let _ = self
+            .tx
+            .send(P2pCommand::AddKnownPeer { peer_id, addr })
+            .await;
     }
 
     #[allow(dead_code)]
@@ -109,6 +124,15 @@ impl P2pHandle {
         let _ = self.tx.send(P2pCommand::PutDid(record)).await;
     }
 
+    pub async fn status(&self) -> Option<SwarmStatus> {
+        let (tx, rx) = oneshot::channel();
+        let _ = self.tx.send(P2pCommand::GetStatus { reply: tx }).await;
+        tokio::time::timeout(std::time::Duration::from_secs(2), rx)
+            .await
+            .ok()
+            .and_then(|r| r.ok())
+    }
+
     /// Look up a DID in the DHT. Returns None if not found or timeout (10s).
     pub async fn get_did(&self, did: String) -> Option<DidRecord> {
         let (tx, rx) = oneshot::channel();
@@ -128,21 +152,23 @@ fn did_to_kad_key(did: &str) -> kad::RecordKey {
 
 /// Combined libp2p behaviour.
 #[derive(NetworkBehaviour)]
+#[behaviour(prelude = "libp2p_swarm::derive_prelude")]
 struct GitlawbBehaviour {
     kademlia: kad::Behaviour<kad::store::MemoryStore>,
     gossipsub: gossipsub::Behaviour,
     identify: identify::Behaviour,
-    mdns: mdns::tokio::Behaviour,
 }
 
 /// Start the libp2p swarm. Returns a handle for sending commands and the
-/// listening multiaddrs. Runs the event loop as a background tokio task.
+/// listening multiaddrs. Runs the event loop as a background tokio task
+/// that exits cleanly when `shutdown_rx` flips to `true`.
 pub async fn start(
     node_did: &str,
     listen_port: u16,
     bootstrap_addrs: Vec<Multiaddr>,
     db: Arc<Db>,
     auto_sync: bool,
+    shutdown_rx: tokio::sync::watch::Receiver<bool>,
 ) -> Result<P2pHandle> {
     // Derive a stable libp2p Ed25519 key from a seed based on the node DID.
     // In production you'd load/persist this key alongside the identity PEM.
@@ -159,7 +185,7 @@ pub async fn start(
         seed_bytes[i * 8..(i + 1) * 8].copy_from_slice(&seed.wrapping_add(i as u64).to_le_bytes());
     }
 
-    let local_key = libp2p::identity::Keypair::ed25519_from_bytes(seed_bytes)
+    let local_key = identity::Keypair::ed25519_from_bytes(seed_bytes)
         .map_err(|e| anyhow::anyhow!("failed to create p2p keypair: {e}"))?;
     let local_peer_id = PeerId::from(local_key.public());
 
@@ -172,68 +198,66 @@ pub async fn start(
         local_peer_id,
     };
 
-    // Build the swarm
-    let mut swarm = libp2p::SwarmBuilder::with_existing_identity(local_key)
-        .with_tokio()
-        .with_tcp(
-            tcp::Config::default(),
-            noise::Config::new,
-            yamux::Config::default,
-        )?
-        .with_behaviour(|key| {
-            let peer_id = PeerId::from(key.public());
+    let kad_store = kad::store::MemoryStore::new(local_peer_id);
+    let mut kademlia = kad::Behaviour::new(local_peer_id, kad_store);
+    kademlia.set_mode(Some(kad::Mode::Server));
 
-            // Kademlia
-            let kad_store = kad::store::MemoryStore::new(peer_id);
-            let mut kademlia = kad::Behaviour::new(peer_id, kad_store);
-            kademlia.set_mode(Some(kad::Mode::Server));
+    let gossipsub_config = gossipsub::ConfigBuilder::default()
+        .heartbeat_interval(Duration::from_secs(10))
+        .validation_mode(gossipsub::ValidationMode::Permissive)
+        .message_id_fn(|msg: &gossipsub::Message| {
+            let mut h = DefaultHasher::new();
+            msg.data.hash(&mut h);
+            gossipsub::MessageId::from(h.finish().to_string())
+        })
+        .build()
+        .expect("gossipsub config");
+    let gossipsub = gossipsub::Behaviour::new(
+        gossipsub::MessageAuthenticity::Signed(local_key.clone()),
+        gossipsub_config,
+    )
+    .expect("gossipsub behaviour");
 
-            // Gossipsub — message_id based on content hash to deduplicate
-            let gossipsub_config = gossipsub::ConfigBuilder::default()
-                .heartbeat_interval(Duration::from_secs(10))
-                .validation_mode(gossipsub::ValidationMode::Permissive)
-                .message_id_fn(|msg: &gossipsub::Message| {
-                    let mut h = DefaultHasher::new();
-                    msg.data.hash(&mut h);
-                    gossipsub::MessageId::from(h.finish().to_string())
-                })
-                .build()
-                .expect("gossipsub config");
-            let gossipsub = gossipsub::Behaviour::new(
-                gossipsub::MessageAuthenticity::Signed(key.clone()),
-                gossipsub_config,
-            )
-            .expect("gossipsub behaviour");
+    let identify = identify::Behaviour::new(identify::Config::new(
+        "/gitlawb/1.0.0".to_string(),
+        local_key.public(),
+    ));
 
-            // Identify — so peers can exchange their observed addresses
-            let identify = identify::Behaviour::new(identify::Config::new(
-                "/gitlawb/1.0.0".to_string(),
-                key.public(),
-            ));
-
-            // mDNS — local network peer discovery
-            let mdns = mdns::tokio::Behaviour::new(
-                mdns::Config::default(),
-                peer_id,
-            )
-            .expect("mdns behaviour");
-
-            GitlawbBehaviour {
-                kademlia,
-                gossipsub,
-                identify,
-                mdns,
-            }
-        })?
-        .build();
+    let behaviour = GitlawbBehaviour {
+        kademlia,
+        gossipsub,
+        identify,
+    };
+    // DNS wraps QUIC so multiaddrs like /dns6/<app>.internal/udp/…/quic-v1
+    // resolve at dial time. On Fly, peer nodes must dial each other over the
+    // private 6PN network via <app>.internal hostnames — dialing through the
+    // public anycast edge breaks the handshake (the proxy closes the
+    // connection mid-stream).
+    let quic = libp2p_quic::tokio::Transport::new(libp2p_quic::Config::new(&local_key))
+        .map(|(peer_id, muxer), _| (peer_id, StreamMuxerBox::new(muxer)));
+    let transport = libp2p_dns::tokio::Transport::system(quic)?.boxed();
+    let mut swarm = Swarm::new(
+        transport,
+        behaviour,
+        local_peer_id,
+        libp2p_swarm::Config::with_tokio_executor(),
+    );
 
     // Subscribe to the ref-updates topic
     let topic = gossipsub::IdentTopic::new(REF_UPDATES_TOPIC);
     swarm.behaviour_mut().gossipsub.subscribe(&topic)?;
 
-    // Listen
-    let listen_addr: Multiaddr = format!("/ip4/0.0.0.0/tcp/{listen_port}").parse()?;
-    swarm.listen_on(listen_addr)?;
+    // Listen on both IPv4 (local/mDNS + any IPv4 dials) and IPv6 (required
+    // for Fly's 6PN inter-app network — <app>.internal DNS only returns AAAA
+    // records, so peers dial us via IPv6 and need a matching IPv6 socket).
+    let v4: Multiaddr = format!("/ip4/0.0.0.0/udp/{listen_port}/quic-v1").parse()?;
+    if let Err(e) = swarm.listen_on(v4) {
+        warn!(err = %e, "failed to listen on IPv4");
+    }
+    let v6: Multiaddr = format!("/ip6/::/udp/{listen_port}/quic-v1").parse()?;
+    if let Err(e) = swarm.listen_on(v6) {
+        warn!(err = %e, "failed to listen on IPv6");
+    }
 
     // Bootstrap Kademlia with known peers
     for addr in bootstrap_addrs {
@@ -249,8 +273,18 @@ pub async fn start(
 
     // Start the event loop as a background task
     tokio::spawn(async move {
+        let mut shutdown_rx = shutdown_rx;
         loop {
             tokio::select! {
+                // Graceful shutdown: exit the swarm loop when the
+                // process-wide signal flips. This drops the Swarm
+                // which closes all libp2p connections cleanly.
+                _ = shutdown_rx.changed() => {
+                    if *shutdown_rx.borrow() {
+                        info!("p2p swarm: shutdown signal received, exiting event loop");
+                        break;
+                    }
+                }
                 // Handle swarm events
                 event = swarm.select_next_some() => {
                     match event {
@@ -298,14 +332,12 @@ pub async fn start(
                             kad::Event::OutboundQueryProgressed { id, result, .. }
                         )) => {
                             match result {
-                                kad::QueryResult::GetRecord(Ok(ok)) => {
-                                    if let kad::GetRecordOk::FoundRecord(pr) = ok {
-                                        if let Some(reply) = pending_get_did.remove(&id) {
-                                            let record = serde_json::from_slice::<DidRecord>(
-                                                &pr.record.value
-                                            ).ok();
-                                            let _ = reply.send(record);
-                                        }
+                                kad::QueryResult::GetRecord(Ok(kad::GetRecordOk::FoundRecord(pr))) => {
+                                    if let Some(reply) = pending_get_did.remove(&id) {
+                                        let record = serde_json::from_slice::<DidRecord>(
+                                            &pr.record.value
+                                        ).ok();
+                                        let _ = reply.send(record);
                                     }
                                 }
                                 kad::QueryResult::GetRecord(Err(e)) => {
@@ -324,15 +356,6 @@ pub async fn start(
                             }
                         }
 
-                        SwarmEvent::Behaviour(GitlawbBehaviourEvent::Mdns(
-                            mdns::Event::Discovered(peers)
-                        )) => {
-                            for (peer_id, addr) in peers {
-                                debug!(peer = %peer_id, addr = %addr, "mDNS discovered peer");
-                                swarm.behaviour_mut().kademlia.add_address(&peer_id, addr.clone());
-                                let _ = swarm.dial(addr);
-                            }
-                        }
                         SwarmEvent::Behaviour(GitlawbBehaviourEvent::Identify(
                             identify::Event::Received { peer_id, info, .. }
                         )) => {
@@ -391,6 +414,16 @@ pub async fn start(
                             let query_id = swarm.behaviour_mut().kademlia.get_record(key);
                             pending_get_did.insert(query_id, reply);
                         }
+                        P2pCommand::GetStatus { reply } => {
+                            let topic_hash = gossipsub::IdentTopic::new(REF_UPDATES_TOPIC).hash();
+                            let status = SwarmStatus {
+                                connected_peers: swarm.connected_peers().count(),
+                                gossipsub_mesh_peers: swarm.behaviour().gossipsub.mesh_peers(&topic_hash).count(),
+                                gossipsub_all_peers: swarm.behaviour().gossipsub.all_peers().count(),
+                                listen_addrs: swarm.listeners().map(|a| a.to_string()).collect(),
+                            };
+                            let _ = reply.send(status);
+                        }
                     }
                 }
             }

crates/gitlawb-node/src/pinata.rs

@@ -66,38 +66,68 @@ pub async fn pin_object(
     Ok(cid)
 }
 
-/// Pin all git objects in a repo that haven't yet been sent to Pinata.
+/// Pin any of the given candidate git objects that haven't yet been sent to
+/// Pinata.
 ///
-/// Objects already recorded with a `pinata_cid` in the DB are skipped.
-/// Returns `(sha_hex, cid)` pairs for each newly pinned object.
+/// `object_list` is the already-withheld-filtered OID set to pin: the caller
+/// applies `visibility_pack::replicable_objects` on the delta path or the
+/// `..._fail_closed` filter on the full-scan path before calling. `repo_path` is
+/// still needed to read each object's bytes. The twin in `ipfs_pin.rs` mirrors
+/// this shape — change both in lockstep. Objects already recorded with a
+/// `pinata_cid` are skipped. `repo_id` records the pin's provenance (#173).
+/// Returns `(sha_hex, provider_cid)` pairs for each newly pinned object: the
+/// provider CID is the Pinata gateway CID (used for branch→CID recording and
+/// ref-update gossip), NOT the raw resolver-key CID stored in `pinned_cids.cid`.
 pub async fn pin_new_objects(
     client: &reqwest::Client,
     upload_url: &str,
     jwt: &str,
     repo_path: &std::path::Path,
+    object_list: Vec<String>,
     db: &crate::db::Db,
+    repo_id: &str,
 ) -> Vec<(String, String)> {
     if jwt.is_empty() {
         return vec![];
     }
 
-    let object_list = match list_all_objects(repo_path) {
-        Ok(v) => v,
-        Err(e) => {
-            tracing::warn!(
-                repo = %repo_path.display(),
-                err = %e,
-                "failed to list git objects for Pinata upload"
-            );
-            return vec![];
-        }
-    };
-
     let mut pinned = Vec::new();
 
     for sha in object_list {
         match db.has_pinata_cid(&sha).await {
-            Ok(true) => continue,
+            Ok(true) => {
+                // Backfill NULL first-pinner provenance from a known source, in lockstep
+                // with the ipfs_pin skip branch: a pinata-only node otherwise leaves
+                // pre-provenance rows' `pinned_cids.repo_id` NULL forever (grok P2-D). The
+                // resolver still finds the object via the pin_repo_sources union below, so
+                // this is a consistency backfill, not a correctness fix.
+                match db.provenance_for_oid(&sha).await {
+                    Ok(None) => {
+                        if let Err(e) = db.backfill_pin_provenance(&sha, repo_id).await {
+                            tracing::warn!(sha = %sha, err = %e, "failed to backfill pin provenance");
+                        }
+                    }
+                    Ok(Some(_)) => {}
+                    Err(e) => {
+                        tracing::warn!(sha = %sha, err = %e, "DB error reading pin provenance");
+                    }
+                }
+                // F1 (#173 round 8): record this repo as an additional source for the
+                // already-pinned object (mirrors the ipfs_pin skip-branch insert) so the
+                // resolver can serve a shared object from any pin-path source. U3 (#173):
+                // retried through the SHARED helper (this was a bare call, so a single
+                // transient error dropped the source outright) and, on exhaustion, marked
+                // durably so the resolver keeps the bounded scan fallback for the object.
+                if let Err(e) =
+                    crate::ipfs_pin::retry_db_record(|| db.record_pin_source(&sha, repo_id)).await
+                {
+                    tracing::warn!(sha = %sha, err = %e, "failed to record pin source");
+                    if let Err(e) = db.mark_pin_sources_incomplete(&sha).await {
+                        tracing::warn!(sha = %sha, err = %e, "failed to mark pin sources incomplete");
+                    }
+                }
+                continue;
+            }
             Ok(false) => {}
             Err(e) => {
                 tracing::warn!(sha = %sha, err = %e, "DB error checking pinata_cid");
@@ -116,9 +146,32 @@ pub async fn pin_new_objects(
 
         match pin_object(client, upload_url, jwt, &sha, &data).await {
             Ok(cid) if !cid.is_empty() => {
-                if let Err(e) = db.record_pinata_cid(&sha, &cid).await {
+                // The resolver key (`pinned_cids.cid`) must be the locally-computed
+                // raw-content CID, never the provider CID: Pinata wraps the bytes in
+                // dag-pb/UnixFS, so its returned CID does not hash the raw content and
+                // must not become an alias `/ipfs/{cid}` serves raw git bytes for (#173).
+                let raw_cid = gitlawb_core::cid::Cid::from_git_object_bytes(&data).to_string();
+                // U3 (#173): both records go through the shared retry helper, at parity
+                // with the ipfs_pin twin. These were bare calls, so one transient DB error
+                // permanently dropped a pin source.
+                if let Err(e) = crate::ipfs_pin::retry_db_record(|| {
+                    db.record_pinata_cid(&sha, &raw_cid, &cid, Some(repo_id))
+                })
+                .await
+                {
                     tracing::warn!(sha = %sha, err = %e, "failed to record pinata_cid in DB");
                 }
+                // F1 (#173 round 8): also record the first pinner in pin_repo_sources.
+                // U3: an exhausted retry marks the set incomplete so the resolver keeps
+                // the scan fallback rather than 404ing a copy it could serve.
+                if let Err(e) =
+                    crate::ipfs_pin::retry_db_record(|| db.record_pin_source(&sha, repo_id)).await
+                {
+                    tracing::warn!(sha = %sha, err = %e, "failed to record pin source");
+                    if let Err(e) = db.mark_pin_sources_incomplete(&sha).await {
+                        tracing::warn!(sha = %sha, err = %e, "failed to mark pin sources incomplete");
+                    }
+                }
                 pinned.push((sha, cid));
             }
             Ok(_) => {}
@@ -131,25 +184,6 @@ pub async fn pin_new_objects(
     pinned
 }
 
-fn list_all_objects(repo_path: &std::path::Path) -> Result<Vec<String>> {
-    let out = std::process::Command::new("git")
-        .args(["cat-file", "--batch-all-objects", "--batch-check=%(objectname)"])
-        .current_dir(repo_path)
-        .output()
-        .map_err(|e| anyhow::anyhow!("failed to run git cat-file: {e}"))?;
-
-    if !out.status.success() {
-        let stderr = String::from_utf8_lossy(&out.stderr);
-        return Err(anyhow::anyhow!("git cat-file failed: {stderr}"));
-    }
-
-    Ok(String::from_utf8_lossy(&out.stdout)
-        .lines()
-        .map(|l| l.trim().to_string())
-        .filter(|l| !l.is_empty())
-        .collect())
-}
-
 // ── Tests ─────────────────────────────────────────────────────────────────────
 
 #[cfg(test)]
@@ -159,7 +193,14 @@ mod tests {
     #[tokio::test]
     async fn test_pin_skipped_when_jwt_empty() {
         let client = reqwest::Client::new();
-        let result = pin_object(&client, "https://uploads.pinata.cloud/v3/files", "", "deadbeef", b"data").await;
+        let result = pin_object(
+            &client,
+            "https://uploads.pinata.cloud/v3/files",
+            "",
+            "deadbeef",
+            b"data",
+        )
+        .await;
         assert!(result.is_ok());
         assert_eq!(result.unwrap(), "", "empty JWT must return empty CID");
     }
@@ -186,7 +227,10 @@ mod tests {
         .await;
 
         assert!(result.is_ok(), "pin should succeed: {result:?}");
-        assert_eq!(result.unwrap(), "QmYwAPJzv5CZsnA625s3Xf2nemtYgPpHdWEz79ojWnPbdG");
+        assert_eq!(
+            result.unwrap(),
+            "QmYwAPJzv5CZsnA625s3Xf2nemtYgPpHdWEz79ojWnPbdG"
+        );
         _mock.assert_async().await;
     }
 
@@ -201,7 +245,14 @@ mod tests {
             .await;
 
         let client = reqwest::Client::new();
-        let result = pin_object(&client, &server.url(), "bad-jwt", "deadbeef00000000", b"data").await;
+        let result = pin_object(
+            &client,
+            &server.url(),
+            "bad-jwt",
+            "deadbeef00000000",
+            b"data",
+        )
+        .await;
 
         assert!(result.is_err());
         assert!(result.unwrap_err().to_string().contains("401"));
@@ -255,7 +306,14 @@ mod tests {
             .await;
 
         let client = reqwest::Client::new();
-        let result = pin_object(&client, &server.url(), "my-pinata-jwt", "deadbeef00000000", b"data").await;
+        let result = pin_object(
+            &client,
+            &server.url(),
+            "my-pinata-jwt",
+            "deadbeef00000000",
+            b"data",
+        )
+        .await;
 
         assert!(result.is_ok());
         _mock.assert_async().await;

crates/gitlawb-node/src/rate_limit.rs

@@ -0,0 +1,784 @@
+use std::collections::HashMap;
+use std::net::SocketAddr;
+use std::sync::Arc;
+use std::time::{Duration, Instant};
+
+use axum::extract::{ConnectInfo, Request};
+use axum::http::{HeaderMap, StatusCode};
+use axum::middleware::Next;
+use axum::response::{IntoResponse, Response};
+use tokio::sync::Mutex;
+
+use crate::auth::AuthenticatedDid;
+
+/// Default ceiling on the number of distinct keys a limiter tracks. Bounds the
+/// limiter's own memory so a caller that can vary the key (many DIDs, or a
+/// spoofable IP header) cannot grow the map without limit.
+const DEFAULT_MAX_KEYS: usize = 100_000;
+
+#[derive(Clone)]
+struct Window {
+    timestamps: Vec<Instant>,
+}
+
+#[derive(Clone)]
+pub struct RateLimiter {
+    state: Arc<Mutex<HashMap<String, Window>>>,
+    max_requests: usize,
+    window: Duration,
+    /// Hard cap on tracked keys. When full, expired keys are evicted (at most
+    /// once per [`sweep_interval`](Self::sweep_interval), see below); if still
+    /// full, a request under a *new* key is rejected rather than inserted — so
+    /// the map can never exceed this bound and a rejected request never
+    /// allocates a new entry.
+    max_keys: usize,
+    /// Timestamp of the last inline capacity sweep. The eviction scan is
+    /// O(max_keys), so under a distinct-key flood (when the map sits at the
+    /// cap) running it on every miss would serialize all traffic behind a full
+    /// scan. Gating it to at most once per interval amortizes that cost; the
+    /// background [`cleanup`](Self::cleanup) loop still reclaims on its own.
+    last_sweep: Arc<Mutex<Instant>>,
+}
+
+impl RateLimiter {
+    // Retained for tests and callers that don't need a tight key bound;
+    // production limiters use `new_bounded`.
+    #[allow(dead_code)]
+    pub fn new(max_requests: usize, window: Duration) -> Self {
+        Self::new_bounded(max_requests, window, DEFAULT_MAX_KEYS)
+    }
+
+    /// Like [`new`] but with an explicit cap on the number of distinct keys.
+    /// Production limiters keyed on client-influenced values (per-DID, per-IP)
+    /// set this so the limiter's own state cannot be turned into a
+    /// memory-exhaustion vector.
+    pub fn new_bounded(max_requests: usize, window: Duration, max_keys: usize) -> Self {
+        Self {
+            state: Arc::new(Mutex::new(HashMap::new())),
+            max_requests,
+            window,
+            max_keys: max_keys.max(1),
+            last_sweep: Arc::new(Mutex::new(Instant::now())),
+        }
+    }
+
+    /// How often the inline capacity sweep may run: at most once per second, or
+    /// once per window when the window is shorter. Bounds post-flood staleness
+    /// (a full map self-heals within one interval) without paying the O(max_keys)
+    /// scan on every capacity miss.
+    fn sweep_interval(&self) -> Duration {
+        self.window.min(Duration::from_secs(1))
+    }
+
+    pub(crate) async fn check(&self, key: &str) -> bool {
+        // max_requests == 0 means the limiter is disabled, not "block all".
+        if self.max_requests == 0 {
+            return true;
+        }
+        let now = Instant::now();
+        let mut state = self.state.lock().await;
+
+        // Fast path: an already-tracked key never allocates and never grows the
+        // map, so it is unaffected by the key cap.
+        if let Some(window) = state.get_mut(key) {
+            window
+                .timestamps
+                .retain(|t| now.duration_since(*t) < self.window);
+            if window.timestamps.len() >= self.max_requests {
+                return false;
+            }
+            window.timestamps.push(now);
+            return true;
+        }
+
+        // New key. Enforce the cap BEFORE inserting so a flood of distinct keys
+        // cannot grow the map, and a rejected request never allocates an entry.
+        if state.len() >= self.max_keys {
+            // Reclaim expired keys, but at most once per sweep interval — the
+            // scan is O(max_keys) and the map sits at the cap precisely during a
+            // distinct-key flood, so sweeping per miss would serialize traffic
+            // behind a full scan. Between sweeps a new key is simply rejected.
+            let mut last_sweep = self.last_sweep.lock().await;
+            if now.duration_since(*last_sweep) >= self.sweep_interval() {
+                state.retain(|_, w| {
+                    w.timestamps
+                        .retain(|t| now.duration_since(*t) < self.window);
+                    !w.timestamps.is_empty()
+                });
+                *last_sweep = now;
+            }
+            drop(last_sweep);
+            if state.len() >= self.max_keys {
+                return false;
+            }
+        }
+        state.insert(
+            key.to_string(),
+            Window {
+                timestamps: vec![now],
+            },
+        );
+        true
+    }
+
+    /// Non-consuming check: is this key ALREADY at its limit for the current window?
+    /// Unlike [`check`], it records nothing and never inserts a new key — used to shed
+    /// expensive preparatory work (e.g. the `/ipfs/{cid}` legacy scan's O(repos) DB
+    /// preload) BEFORE it runs, without perturbing the per-unit budget the consuming
+    /// `check` maintains (#173, F3). An unknown key or a disabled limiter is not
+    /// throttled. Prunes the key's expired timestamps as a side effect (keeps state
+    /// tidy) but adds none, so it cannot itself fill or grow the map.
+    pub(crate) async fn is_throttled(&self, key: &str) -> bool {
+        if self.max_requests == 0 {
+            return false;
+        }
+        let now = Instant::now();
+        let mut state = self.state.lock().await;
+        if let Some(window) = state.get_mut(key) {
+            window
+                .timestamps
+                .retain(|t| now.duration_since(*t) < self.window);
+            return window.timestamps.len() >= self.max_requests;
+        }
+        false
+    }
+
+    pub async fn cleanup(&self) {
+        let now = Instant::now();
+        let mut state = self.state.lock().await;
+        state.retain(|_, w| {
+            w.timestamps
+                .retain(|t| now.duration_since(*t) < self.window);
+            !w.timestamps.is_empty()
+        });
+    }
+
+    /// Number of distinct keys currently tracked. Test-only introspection so a
+    /// cross-module test can assert that a sweep actually evicted expired entries.
+    #[cfg(test)]
+    pub(crate) async fn tracked_keys(&self) -> usize {
+        self.state.lock().await.len()
+    }
+}
+
+/// A bounded per-caller CONCURRENCY limiter — distinct from [`RateLimiter`], which
+/// caps request RATE. Each caller key may hold at most `per_caller` in-flight
+/// permits at once; beyond that [`try_acquire`](Self::try_acquire) returns `None`
+/// and the caller sheds. Used to stop one caller (a single anonymous source-IP or
+/// DID) monopolizing the served-git read pool (#174).
+///
+/// The key map is self-bounding: a key is removed the instant its in-flight count
+/// reaches zero, so it never holds more keys than there are concurrently-active
+/// callers (itself bounded by the read semaphore). A `max_keys` reject-before-insert
+/// backstop guarantees a key farm can never grow the map even if that invariant
+/// weakened — a NEW key at the cap is rejected WITHOUT allocating an entry (INV-15).
+///
+/// Uses a `std::sync::Mutex` (not the file's `tokio::sync::Mutex`) because the
+/// permit's `Drop` must release synchronously; the critical section holds no await.
+#[derive(Clone)]
+pub struct PerCallerConcurrency {
+    state: Arc<std::sync::Mutex<HashMap<String, usize>>>,
+    per_caller: usize,
+    max_keys: usize,
+}
+
+/// RAII permit from [`PerCallerConcurrency::try_acquire`]. On drop it decrements
+/// the caller's in-flight count and removes the key when it reaches zero.
+pub struct PerCallerPermit {
+    state: Arc<std::sync::Mutex<HashMap<String, usize>>>,
+    key: String,
+}
+
+impl PerCallerConcurrency {
+    pub fn new(per_caller: usize, max_keys: usize) -> Self {
+        Self {
+            state: Arc::new(std::sync::Mutex::new(HashMap::new())),
+            per_caller: per_caller.max(1),
+            max_keys: max_keys.max(1),
+        }
+    }
+
+    /// Convenience constructor with the default key bound.
+    pub fn with_default_max_keys(per_caller: usize) -> Self {
+        Self::new(per_caller, DEFAULT_MAX_KEYS)
+    }
+
+    /// `Some(permit)` when the caller is under its cap and the map has room;
+    /// `None` (shed) otherwise. Reject-before-insert: a new key at `max_keys` is
+    /// rejected without allocating.
+    pub fn try_acquire(&self, key: &str) -> Option<PerCallerPermit> {
+        // Recover from a poisoned lock rather than panicking: the critical section
+        // is pure counter arithmetic and cannot itself panic, so a poisoned mutex
+        // would only ever come from an unrelated abort, and a slightly-off count
+        // self-heals as permits drop. A panic here would instead brick the limiter
+        // for every caller (each subsequent lock re-panics).
+        let mut map = self.state.lock().unwrap_or_else(|e| e.into_inner());
+        match map.get_mut(key) {
+            Some(count) => {
+                if *count >= self.per_caller {
+                    return None;
+                }
+                *count += 1;
+            }
+            None => {
+                if map.len() >= self.max_keys {
+                    return None;
+                }
+                map.insert(key.to_string(), 1);
+            }
+        }
+        Some(PerCallerPermit {
+            state: self.state.clone(),
+            key: key.to_string(),
+        })
+    }
+
+    #[cfg(test)]
+    pub fn tracked_keys(&self) -> usize {
+        self.state.lock().unwrap().len()
+    }
+}
+
+impl Drop for PerCallerPermit {
+    fn drop(&mut self) {
+        let mut map = self.state.lock().unwrap_or_else(|e| e.into_inner());
+        if let Some(count) = map.get_mut(&self.key) {
+            *count -= 1;
+            if *count == 0 {
+                map.remove(&self.key);
+            }
+        }
+    }
+}
+
+pub async fn rate_limit_by_did(request: Request, next: Next) -> Response {
+    let limiter = request.extensions().get::<RateLimiter>().cloned();
+
+    let did = request
+        .extensions()
+        .get::<AuthenticatedDid>()
+        .map(|a| a.0.clone());
+
+    if let (Some(limiter), Some(did)) = (limiter, did) {
+        if !limiter.check(&did).await {
+            return (
+                StatusCode::TOO_MANY_REQUESTS,
+                [("retry-after", "60")],
+                "rate limit exceeded — try again later",
+            )
+                .into_response();
+        }
+    }
+
+    next.run(request).await
+}
+
+/// Which forwarded header (if any) the operator's edge is trusted to set. Only
+/// a proxy the operator controls may be believed; a raw client can put any
+/// value in `Fly-Client-IP` / `X-Forwarded-For`, so trusting them unconditionally
+/// lets a flooder rotate the header and never fill a bucket. Configured via
+/// `GITLAWB_TRUSTED_PROXY`.
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+pub enum TrustedProxy {
+    /// No trusted proxy: ignore forwarded headers, key on the socket peer IP.
+    /// Safe default for direct/self-hosted nodes.
+    None,
+    /// Behind Fly's edge, which sets (and overwrites any client-supplied)
+    /// `Fly-Client-IP`.
+    Fly,
+    /// Behind a single reverse proxy (e.g. Caddy on the AWS image) that appends
+    /// the real client as the rightmost `X-Forwarded-For` hop.
+    XForwardedFor,
+}
+
+impl TrustedProxy {
+    /// Parse `GITLAWB_TRUSTED_PROXY`. Unknown/empty → `None` (trust nothing).
+    pub fn from_env_value(s: &str) -> Self {
+        match s.trim().to_ascii_lowercase().as_str() {
+            "fly" | "fly-client-ip" => TrustedProxy::Fly,
+            "xff" | "x-forwarded-for" | "caddy" => TrustedProxy::XForwardedFor,
+            _ => TrustedProxy::None,
+        }
+    }
+}
+
+fn trimmed_nonempty(v: &str) -> Option<String> {
+    let t = v.trim();
+    (!t.is_empty()).then(|| t.to_string())
+}
+
+/// Resolve the rate-limit key for a request. In a trusted-proxy mode the
+/// operator's edge header is preferred; when that header is missing or empty we
+/// fall back to the socket peer address rather than skipping the limiter (a
+/// malformed header must never disable the brake). With no trusted proxy the
+/// socket peer is always used and forwarded headers are ignored entirely.
+/// Returns `None` only when neither a trusted header nor a peer address is
+/// available (e.g. a synthetic test request with no `ConnectInfo`).
+pub fn client_key(
+    headers: &HeaderMap,
+    peer: Option<SocketAddr>,
+    trust: TrustedProxy,
+) -> Option<String> {
+    let from_header = match trust {
+        TrustedProxy::None => None,
+        TrustedProxy::Fly => headers
+            .get("fly-client-ip")
+            .and_then(|v| v.to_str().ok())
+            .and_then(trimmed_nonempty),
+        // Rightmost hop = the value appended by the immediately-upstream trusted
+        // proxy. The leftmost hop is client-controlled and must not be trusted.
+        TrustedProxy::XForwardedFor => headers
+            .get("x-forwarded-for")
+            .and_then(|v| v.to_str().ok())
+            .and_then(|v| v.rsplit(',').next())
+            .and_then(trimmed_nonempty),
+    };
+    from_header.or_else(|| peer.map(|p| p.ip().to_string()))
+}
+
+/// Per-client-IP limiter for the git push path, carrying the trusted-proxy
+/// policy. A newtype so it can live in request extensions (keyed by type)
+/// alongside the per-DID [`RateLimiter`]. Per-DID limits are useless against a
+/// push flood from a DID farm (one throwaway DID per repo), so the push path
+/// throttles on the resolved client IP instead.
+#[derive(Clone)]
+pub struct IpRateLimiter {
+    pub limiter: RateLimiter,
+    pub trust: TrustedProxy,
+}
+
+/// Infallible extractor for the socket peer address from `ConnectInfo`. Yields
+/// `None` when the server was started without connect-info (e.g. `oneshot` in
+/// tests), so a handler never 500s on its absence — the limiter simply falls
+/// back per [`client_key`].
+pub struct PeerAddr(pub Option<SocketAddr>);
+
+impl<S: Send + Sync> axum::extract::FromRequestParts<S> for PeerAddr {
+    type Rejection = std::convert::Infallible;
+
+    async fn from_request_parts(
+        parts: &mut axum::http::request::Parts,
+        _state: &S,
+    ) -> Result<Self, Self::Rejection> {
+        Ok(PeerAddr(
+            parts
+                .extensions
+                .get::<ConnectInfo<SocketAddr>>()
+                .map(|c| c.0),
+        ))
+    }
+}
+
+/// The shared 429 response for the per-IP flood brakes. Route-agnostic: this
+/// middleware now serves the push path AND the peer-sync routes, so the message
+/// stays generic (the offending path is recorded in the warn log below).
+pub fn too_many_requests() -> Response {
+    (
+        StatusCode::TOO_MANY_REQUESTS,
+        [("retry-after", "60")],
+        "rate limit exceeded — try again later",
+    )
+        .into_response()
+}
+
+/// Throttle the git push path by resolved client IP. The socket peer address is
+/// read from `ConnectInfo` (see `into_make_service_with_connect_info` in
+/// `main`). Only skips the limiter when no key can be resolved at all.
+pub async fn rate_limit_by_ip(request: Request, next: Next) -> Response {
+    let limiter = request.extensions().get::<IpRateLimiter>().cloned();
+    let peer = request
+        .extensions()
+        .get::<ConnectInfo<SocketAddr>>()
+        .map(|c| c.0);
+
+    if let Some(limiter) = limiter {
+        if let Some(key) = client_key(request.headers(), peer, limiter.trust) {
+            if !limiter.limiter.check(&key).await {
+                tracing::warn!(key = %key, path = %request.uri().path(), "per-IP rate limit exceeded");
+                return too_many_requests();
+            }
+        }
+    }
+
+    next.run(request).await
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn per_caller_concurrency_caps_one_caller_and_frees_on_drop() {
+        let lim = PerCallerConcurrency::new(2, 100);
+        let p1 = lim.try_acquire("did:key:zA").expect("first under cap");
+        let p2 = lim.try_acquire("did:key:zA").expect("second under cap");
+        assert!(
+            lim.try_acquire("did:key:zA").is_none(),
+            "a third in-flight op for the same caller sheds (over the per-caller cap)"
+        );
+        // A DIFFERENT caller is unaffected — the cap is per-caller, not global.
+        let _other = lim
+            .try_acquire("did:key:zB")
+            .expect("a different caller has its own budget");
+        drop(p1);
+        assert!(
+            lim.try_acquire("did:key:zA").is_some(),
+            "freeing one in-flight slot lets the same caller back in"
+        );
+        drop(p2);
+    }
+
+    #[test]
+    fn per_caller_concurrency_map_is_self_bounding_and_reject_before_insert() {
+        // Self-bounding: acquire+drop many distinct keys — the map never grows
+        // because a key is removed the instant its in-flight count hits zero.
+        let lim = PerCallerConcurrency::new(4, 3);
+        for i in 0..50 {
+            let _p = lim.try_acquire(&format!("k{i}"));
+        }
+        assert_eq!(
+            lim.tracked_keys(),
+            0,
+            "keys with zero in-flight ops are removed, so an acquire+drop flood leaves the map empty"
+        );
+        // Reject-before-insert: HOLD max_keys distinct keys, then a new key sheds
+        // WITHOUT growing the map past the cap (INV-15 — a rejected request never
+        // allocates an entry).
+        let held: Vec<_> = (0..3)
+            .map(|i| lim.try_acquire(&format!("h{i}")).unwrap())
+            .collect();
+        assert_eq!(
+            lim.tracked_keys(),
+            3,
+            "three distinct callers held concurrently"
+        );
+        assert!(
+            lim.try_acquire("h3").is_none(),
+            "a new key at max_keys is rejected"
+        );
+        assert_eq!(
+            lim.tracked_keys(),
+            3,
+            "the rejected new key did not allocate an entry (reject-before-insert)"
+        );
+        drop(held);
+    }
+
+    #[tokio::test]
+    async fn allows_within_limit() {
+        let limiter = RateLimiter::new(3, Duration::from_secs(60));
+        assert!(limiter.check("did:key:test1").await);
+        assert!(limiter.check("did:key:test1").await);
+        assert!(limiter.check("did:key:test1").await);
+    }
+
+    #[tokio::test]
+    async fn blocks_over_limit() {
+        let limiter = RateLimiter::new(2, Duration::from_secs(60));
+        assert!(limiter.check("did:key:test2").await);
+        assert!(limiter.check("did:key:test2").await);
+        assert!(!limiter.check("did:key:test2").await);
+    }
+
+    #[tokio::test]
+    async fn separate_keys_independent() {
+        let limiter = RateLimiter::new(1, Duration::from_secs(60));
+        assert!(limiter.check("did:key:alice").await);
+        assert!(limiter.check("did:key:bob").await);
+        assert!(!limiter.check("did:key:alice").await);
+    }
+
+    #[tokio::test]
+    async fn window_expires() {
+        let limiter = RateLimiter::new(1, Duration::from_millis(50));
+        assert!(limiter.check("did:key:test3").await);
+        assert!(!limiter.check("did:key:test3").await);
+        tokio::time::sleep(Duration::from_millis(60)).await;
+        assert!(limiter.check("did:key:test3").await);
+    }
+
+    #[tokio::test]
+    async fn cleanup_removes_expired() {
+        let limiter = RateLimiter::new(1, Duration::from_millis(50));
+        limiter.check("did:key:stale").await;
+        tokio::time::sleep(Duration::from_millis(60)).await;
+        limiter.cleanup().await;
+        let state = limiter.state.lock().await;
+        assert!(state.is_empty());
+    }
+
+    #[tokio::test]
+    async fn zero_limit_disables() {
+        let limiter = RateLimiter::new(0, Duration::from_secs(60));
+        for _ in 0..1000 {
+            assert!(limiter.check("k").await);
+        }
+    }
+
+    // ── key-cap / memory-bound (P2) ──────────────────────────────────────
+
+    #[tokio::test]
+    async fn caps_tracked_keys_and_rejects_new_ones_when_full() {
+        // Cap of 2 distinct keys; generous request budget so rejection is due to
+        // the key cap, not the per-key limit.
+        let limiter = RateLimiter::new_bounded(100, Duration::from_secs(60), 2);
+        assert!(limiter.check("a").await);
+        assert!(limiter.check("b").await);
+        // Third distinct key would grow the map past the cap → rejected.
+        assert!(!limiter.check("c").await);
+        // The map never exceeded the cap, and the rejected key was NOT inserted.
+        let state = limiter.state.lock().await;
+        assert_eq!(state.len(), 2);
+        assert!(!state.contains_key("c"));
+    }
+
+    #[tokio::test]
+    async fn known_key_unaffected_by_cap() {
+        let limiter = RateLimiter::new_bounded(100, Duration::from_secs(60), 1);
+        assert!(limiter.check("a").await); // fills the single slot
+        assert!(limiter.check("a").await); // same key still served
+        assert!(!limiter.check("b").await); // new key rejected — cap full
+    }
+
+    #[tokio::test]
+    async fn expired_keys_evicted_to_admit_new_when_full() {
+        let limiter = RateLimiter::new_bounded(100, Duration::from_millis(40), 1);
+        assert!(limiter.check("old").await);
+        tokio::time::sleep(Duration::from_millis(55)).await;
+        // "old" is now expired; a new key triggers inline eviction and is admitted.
+        assert!(limiter.check("new").await);
+        let state = limiter.state.lock().await;
+        assert!(state.contains_key("new"));
+        assert!(!state.contains_key("old"));
+    }
+
+    #[tokio::test]
+    async fn capacity_sweep_is_amortized_within_interval() {
+        // The O(max_keys) eviction scan must not run on every capacity miss.
+        // With a 1s sweep interval, the resident (unexpired) key is never
+        // evicted by a burst of misses, so repeated new keys are all rejected
+        // without disturbing existing state.
+        let limiter = RateLimiter::new_bounded(100, Duration::from_secs(1), 1);
+        assert!(limiter.check("resident").await);
+        for i in 0..100 {
+            assert!(
+                !limiter.check(&format!("flood-{i}")).await,
+                "new key must be rejected while the single slot is held"
+            );
+        }
+        let state = limiter.state.lock().await;
+        assert_eq!(state.len(), 1, "no flood key was ever inserted");
+        assert!(state.contains_key("resident"));
+    }
+
+    // ── client_key / trusted-proxy resolution (P1 + P2) ─────────────────
+
+    fn headers(pairs: &[(&str, &str)]) -> HeaderMap {
+        let mut h = HeaderMap::new();
+        for (k, v) in pairs {
+            h.insert(
+                axum::http::HeaderName::from_bytes(k.as_bytes()).unwrap(),
+                v.parse().unwrap(),
+            );
+        }
+        h
+    }
+
+    fn peer(s: &str) -> Option<SocketAddr> {
+        Some(s.parse().unwrap())
+    }
+
+    #[test]
+    fn none_mode_ignores_headers_and_uses_peer() {
+        // Even a well-formed Fly header is ignored without a trusted proxy.
+        let h = headers(&[("fly-client-ip", "203.0.113.7")]);
+        assert_eq!(
+            client_key(&h, peer("198.51.100.9:4000"), TrustedProxy::None).as_deref(),
+            Some("198.51.100.9")
+        );
+    }
+
+    #[test]
+    fn fly_mode_trusts_fly_header() {
+        let h = headers(&[
+            ("fly-client-ip", "203.0.113.7"),
+            ("x-forwarded-for", "1.2.3.4"),
+        ]);
+        assert_eq!(
+            client_key(&h, peer("10.0.0.1:1"), TrustedProxy::Fly).as_deref(),
+            Some("203.0.113.7")
+        );
+    }
+
+    #[test]
+    fn fly_mode_empty_header_falls_back_to_peer_not_skip() {
+        // Empty Fly-Client-IP must NOT collapse traffic onto Some("") nor skip
+        // the limiter — it falls back to the real peer.
+        let h = headers(&[("fly-client-ip", "")]);
+        assert_eq!(
+            client_key(&h, peer("198.51.100.9:4000"), TrustedProxy::Fly).as_deref(),
+            Some("198.51.100.9")
+        );
+    }
+
+    #[test]
+    fn xff_mode_uses_rightmost_hop_not_client_controlled_first() {
+        // Client prepends spoofed hops; only the rightmost (proxy-appended) is trusted.
+        let h = headers(&[("x-forwarded-for", "9.9.9.9, 8.8.8.8, 198.51.100.9")]);
+        assert_eq!(
+            client_key(&h, peer("10.0.0.1:1"), TrustedProxy::XForwardedFor).as_deref(),
+            Some("198.51.100.9")
+        );
+    }
+
+    #[test]
+    fn xff_mode_empty_leading_hop_does_not_disable_brake() {
+        // "X-Forwarded-For: ,1.2.3.4" — rightmost hop is used; never None-skips.
+        let h = headers(&[("x-forwarded-for", ",1.2.3.4")]);
+        assert_eq!(
+            client_key(&h, peer("10.0.0.1:1"), TrustedProxy::XForwardedFor).as_deref(),
+            Some("1.2.3.4")
+        );
+    }
+
+    #[test]
+    fn malformed_xff_falls_back_to_peer() {
+        let h = headers(&[("x-forwarded-for", " , ")]);
+        assert_eq!(
+            client_key(&h, peer("198.51.100.9:4000"), TrustedProxy::XForwardedFor).as_deref(),
+            Some("198.51.100.9")
+        );
+    }
+
+    #[test]
+    fn trusted_proxy_parsing() {
+        assert_eq!(TrustedProxy::from_env_value("fly"), TrustedProxy::Fly);
+        assert_eq!(
+            TrustedProxy::from_env_value("X-Forwarded-For"),
+            TrustedProxy::XForwardedFor
+        );
+        assert_eq!(
+            TrustedProxy::from_env_value("caddy"),
+            TrustedProxy::XForwardedFor
+        );
+        assert_eq!(TrustedProxy::from_env_value(""), TrustedProxy::None);
+        assert_eq!(TrustedProxy::from_env_value("garbage"), TrustedProxy::None);
+    }
+
+    // ── middleware 429 path ─────────────────────────────────────────────
+
+    /// A minimal router with the push limiter layered over an OK handler,
+    /// driven via `oneshot`. `ConnectInfo` is attached to each request directly
+    /// (as the production make-service does) so the middleware resolves a peer.
+    fn ip_limited_router(limiter: IpRateLimiter) -> axum::Router {
+        axum::Router::new()
+            .route(
+                "/o/r/git-receive-pack",
+                axum::routing::post(|| async { StatusCode::OK }),
+            )
+            .layer(axum::middleware::from_fn(rate_limit_by_ip))
+            .layer(axum::Extension(limiter))
+    }
+
+    async fn post_from(router: &axum::Router, peer: SocketAddr) -> StatusCode {
+        use tower::ServiceExt;
+        let mut req = axum::http::Request::builder()
+            .method(axum::http::Method::POST)
+            .uri("/o/r/git-receive-pack")
+            .body(axum::body::Body::empty())
+            .unwrap();
+        req.extensions_mut().insert(ConnectInfo(peer));
+        router.clone().oneshot(req).await.unwrap().status()
+    }
+
+    #[tokio::test]
+    async fn middleware_returns_429_over_limit() {
+        let router = ip_limited_router(IpRateLimiter {
+            limiter: RateLimiter::new(2, Duration::from_secs(60)),
+            trust: TrustedProxy::None,
+        });
+        let peer: SocketAddr = "203.0.113.7:5000".parse().unwrap();
+        // Two requests inside the budget, the third over it (shared Arc state).
+        assert_eq!(post_from(&router, peer).await, StatusCode::OK);
+        assert_eq!(post_from(&router, peer).await, StatusCode::OK);
+        assert_eq!(
+            post_from(&router, peer).await,
+            StatusCode::TOO_MANY_REQUESTS
+        );
+    }
+
+    #[tokio::test]
+    async fn middleware_isolates_distinct_peers() {
+        let router = ip_limited_router(IpRateLimiter {
+            limiter: RateLimiter::new(1, Duration::from_secs(60)),
+            trust: TrustedProxy::None,
+        });
+        let a: SocketAddr = "203.0.113.1:1".parse().unwrap();
+        let b: SocketAddr = "203.0.113.2:1".parse().unwrap();
+        assert_eq!(post_from(&router, a).await, StatusCode::OK);
+        assert_eq!(post_from(&router, b).await, StatusCode::OK); // independent bucket
+        assert_eq!(post_from(&router, a).await, StatusCode::TOO_MANY_REQUESTS);
+    }
+
+    // ── creation-route layering: IP brake runs BEFORE auth ──────────────
+
+    /// A minimal stand-in for the creation route group: an inner "auth" layer
+    /// that rejects every request with 401 (as signature verification would for
+    /// an unsigned caller), wrapped by the per-IP creation limiter as the
+    /// outermost layer — exactly the ordering `server::build_router` applies to
+    /// `/api/v1/repos` et al. Lets us assert the security-relevant property
+    /// (flood traffic is braked before auth burns CPU) without a database, which
+    /// the full `#[sqlx::test]` route test in `api::repos` cannot cover in the
+    /// plain unit-test pass.
+    fn ip_limited_over_auth_router(limiter: IpRateLimiter) -> axum::Router {
+        async fn always_unauthorized(_req: Request, _next: Next) -> Response {
+            StatusCode::UNAUTHORIZED.into_response()
+        }
+        axum::Router::new()
+            .route(
+                "/api/v1/repos",
+                axum::routing::post(|| async { StatusCode::CREATED }),
+            )
+            .layer(axum::middleware::from_fn(always_unauthorized))
+            .layer(axum::middleware::from_fn(rate_limit_by_ip))
+            .layer(axum::Extension(limiter))
+    }
+
+    async fn post_repos_from(router: &axum::Router, peer: SocketAddr) -> StatusCode {
+        use tower::ServiceExt;
+        let mut req = axum::http::Request::builder()
+            .method(axum::http::Method::POST)
+            .uri("/api/v1/repos")
+            .body(axum::body::Body::empty())
+            .unwrap();
+        req.extensions_mut().insert(ConnectInfo(peer));
+        router.clone().oneshot(req).await.unwrap().status()
+    }
+
+    #[tokio::test]
+    async fn creation_ip_brake_rejects_before_auth() {
+        // A DID farm mints a fresh signature per repo, so the per-DID limiter
+        // never trips; the per-IP brake is what stops the flood. It must run
+        // outermost, ahead of auth, so a flood is rejected with 429 before
+        // signature verification — otherwise every request would reach (and pay
+        // for) auth and merely 401.
+        let router = ip_limited_over_auth_router(IpRateLimiter {
+            limiter: RateLimiter::new(1, Duration::from_secs(60)),
+            trust: TrustedProxy::None,
+        });
+        let peer: SocketAddr = "203.0.113.42:7000".parse().unwrap();
+
+        // First request passes the IP brake and reaches the (failing) auth layer.
+        assert_eq!(
+            post_repos_from(&router, peer).await,
+            StatusCode::UNAUTHORIZED
+        );
+        // Budget now exhausted: the IP brake short-circuits with 429 *before*
+        // auth — proving the limiter is the outermost layer.
+        assert_eq!(
+            post_repos_from(&router, peer).await,
+            StatusCode::TOO_MANY_REQUESTS,
+            "an exhausted IP must be braked with 429 before auth runs, not leak to 401"
+        );
+    }
+}

crates/gitlawb-node/src/server.rs

@@ -1,4 +1,5 @@
 use async_graphql_axum::{GraphQLRequest, GraphQLResponse, GraphQLSubscription};
+use axum::extract::DefaultBodyLimit;
 use axum::{
     extract::State,
     middleware,
@@ -6,21 +7,32 @@ use axum::{
     routing::{get, post},
     Json, Router,
 };
-use axum::extract::DefaultBodyLimit;
-use tower_http::limit::RequestBodyLimitLayer;
 use serde_json::json;
-use tower_http::trace::{DefaultOnResponse, DefaultOnFailure, TraceLayer};
+use tower_http::limit::RequestBodyLimitLayer;
+use tower_http::trace::{DefaultOnFailure, DefaultOnResponse, TraceLayer};
 use tracing::Level;
 
-use crate::api::{agents, arweave, bounties, certs, changelog, events, ipfs, issues, labels, peers, protect, pulls, register, repos, resolve, stars, tasks, webhooks};
+use crate::api::{
+    agents, arweave, bounties, certs, changelog, events, ipfs, issues, labels, peers, profiles,
+    protect, pulls, register, replicas, repos, resolve, stars, tasks, visibility, webhooks,
+};
 use crate::auth;
+use crate::rate_limit;
 use crate::state::AppState;
 
 async fn graphql_handler(
     State(state): State<AppState>,
+    auth: Option<axum::Extension<crate::auth::AuthenticatedDid>>,
     req: GraphQLRequest,
 ) -> GraphQLResponse {
-    state.graphql_schema.execute(req.into_inner()).await.into()
+    // `optional_signature` attaches the verified DID when a signature is present.
+    // Thread it into request-scoped GraphQL data; mutations enforce its presence
+    // in-resolver (N2) while queries stay open.
+    let mut inner = req.into_inner();
+    if let Some(axum::Extension(did)) = auth {
+        inner = inner.data(did);
+    }
+    state.graphql_schema.execute(inner).await.into()
 }
 
 async fn graphql_playground() -> impl IntoResponse {
@@ -30,145 +42,431 @@ async fn graphql_playground() -> impl IntoResponse {
     ))
 }
 
+/// Applies the standard auth middleware pair to a router: HTTP Signature verification
+/// followed by UCAN chain validation. The two layers run in this order for every
+/// matched request: `require_signature` first (sets `AuthenticatedDid`), then
+/// `require_ucan_chain` (reads it).
+fn add_auth_layers(router: Router<AppState>, state: AppState) -> Router<AppState> {
+    router
+        .layer(middleware::from_fn_with_state(
+            state,
+            auth::require_ucan_chain,
+        ))
+        .layer(middleware::from_fn(auth::require_signature))
+}
+
 pub fn build_router(state: AppState) -> Router {
     // ── GraphQL routes ─────────────────────────────────────────────────────
     let schema = state.graphql_schema.as_ref().clone();
     let graphql_routes = Router::new()
         .route("/graphql", get(graphql_playground).post(graphql_handler))
+        // Attach the verified DID to /graphql when a signature is present. The
+        // layer covers only routes added before it, so /graphql/ws (added after,
+        // read-only subscriptions) stays open.
+        .layer(middleware::from_fn(auth::optional_signature))
         .route_service("/graphql/ws", GraphQLSubscription::new(schema));
 
     // ── Task routes (write — require HTTP Signature) ───────────────────────
-    let task_write_routes = Router::new()
-        .route("/api/v1/tasks", post(tasks::create_task))
-        .route("/api/v1/tasks/{id}/claim", post(tasks::claim_task))
-        .route("/api/v1/tasks/{id}/complete", post(tasks::complete_task))
-        .route("/api/v1/tasks/{id}/fail", post(tasks::fail_task))
-        .layer(middleware::from_fn(auth::require_signature));
+    let task_write_routes = add_auth_layers(
+        Router::new()
+            .route("/api/v1/tasks", post(tasks::create_task))
+            .route("/api/v1/tasks/{id}/claim", post(tasks::claim_task))
+            .route("/api/v1/tasks/{id}/complete", post(tasks::complete_task))
+            .route("/api/v1/tasks/{id}/fail", post(tasks::fail_task)),
+        state.clone(),
+    );
 
     // ── Task routes (read — open) ──────────────────────────────────────────
     let task_read_routes = Router::new()
         .route("/api/v1/tasks", get(tasks::list_tasks))
         .route("/api/v1/tasks/{id}", get(tasks::get_task));
 
-    // ── Write routes — require HTTP Signature ──────────────────────────────
-    let write_routes = Router::new()
-        .route("/api/v1/repos", post(repos::create_repo))
-        .route("/api/register", post(register::register))
-        .route("/api/v1/repos/{owner}/{repo}/pulls", post(pulls::create_pr))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/merge", post(pulls::merge_pr))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/close", post(pulls::close_pr))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/reviews", post(pulls::create_review))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/comments", post(pulls::create_comment))
-        .route("/api/v1/repos/{owner}/{repo}/hooks", post(webhooks::create_webhook))
-        .route("/api/v1/repos/{owner}/{repo}/hooks/{id}", axum::routing::delete(webhooks::delete_webhook))
-        .route("/api/v1/repos/{owner}/{repo}/branches/{branch}/protect", post(protect::protect_branch))
-        .route("/api/v1/repos/{owner}/{repo}/branches/{branch}/protect", axum::routing::delete(protect::unprotect_branch))
-        .route("/api/v1/repos/{owner}/{repo}/star", axum::routing::put(stars::star_repo))
-        .route("/api/v1/repos/{owner}/{repo}/star", axum::routing::delete(stars::unstar_repo))
-        .route("/api/v1/repos/{owner}/{repo}/fork", post(repos::fork_repo))
-        .route("/api/v1/repos/{owner}/{repo}/labels", post(labels::add_label))
-        .route("/api/v1/repos/{owner}/{repo}/labels/{label}", axum::routing::delete(labels::remove_label))
-        .layer(middleware::from_fn(auth::require_signature));
+    // ── Rate-limited creation routes — require HTTP Signature, plus a per-DID
+    // throttle AND a per-IP flood brake. The per-DID limiter (inner) caps a
+    // single identity; the per-IP limiter (outer) caps a DID farm that mints a
+    // fresh throwaway did:key per repo to slip past both the per-DID limit and
+    // the iCaptcha gate — the mechanism behind the recurring spam-repo floods.
+    // The per-IP layer wraps the auth layer (outermost = runs first) so flood
+    // traffic is rejected before signature verification burns CPU, matching the
+    // push path.
+    let limiter = state.rate_limiter.clone();
+    let create_ip_limiter = rate_limit::IpRateLimiter {
+        limiter: state.create_ip_rate_limiter.clone(),
+        trust: state.push_limiter_trust,
+    };
+    let creation_routes = add_auth_layers(
+        Router::new()
+            .route("/api/v1/repos", post(repos::create_repo))
+            .route("/api/register", post(register::register))
+            .route("/api/v1/repos/{owner}/{repo}/fork", post(repos::fork_repo))
+            .route(
+                "/api/v1/repos/{owner}/{repo}/issues",
+                post(issues::create_issue),
+            )
+            .route("/api/v1/repos/{owner}/{repo}/pulls", post(pulls::create_pr))
+            .layer(middleware::from_fn(rate_limit::rate_limit_by_did))
+            .layer(axum::Extension(limiter)),
+        state.clone(),
+    )
+    .layer(middleware::from_fn(rate_limit::rate_limit_by_ip))
+    .layer(axum::Extension(create_ip_limiter));
+
+    // ── Write routes — require HTTP Signature (no rate limit) ─────────────
+    let write_routes = add_auth_layers(
+        Router::new()
+            .route(
+                "/api/v1/repos/{owner}/{repo}/pulls/{number}/merge",
+                post(pulls::merge_pr),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/pulls/{number}/close",
+                post(pulls::close_pr),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/pulls/{number}/reviews",
+                post(pulls::create_review),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/pulls/{number}/comments",
+                post(pulls::create_comment),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/hooks",
+                post(webhooks::create_webhook),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/hooks/{id}",
+                axum::routing::delete(webhooks::delete_webhook),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/branches/{branch}/protect",
+                post(protect::protect_branch),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/branches/{branch}/protect",
+                axum::routing::delete(protect::unprotect_branch),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/star",
+                axum::routing::put(stars::star_repo),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/star",
+                axum::routing::delete(stars::unstar_repo),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/replicas",
+                axum::routing::put(replicas::register_replica),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/replicas",
+                axum::routing::delete(replicas::unregister_replica),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/labels",
+                post(labels::add_label),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/labels/{label}",
+                axum::routing::delete(labels::remove_label),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/visibility",
+                axum::routing::put(visibility::set_visibility)
+                    .delete(visibility::remove_visibility)
+                    .get(visibility::list_visibility),
+            )
+            .route(
+                "/api/v1/agents/{did}",
+                axum::routing::delete(agents::deregister_agent),
+            ),
+        state.clone(),
+    );
 
     // Body limit is raised to GITLAWB_MAX_PACK_BYTES (default 2 GB) for git
     // routes only — all other API routes keep axum's default 2 MB cap.
     // HTTP Signature is enforced on receive-pack (push) — the git-remote-gitlawb
     // helper signs requests with RFC 9421 signatures using the agent's keypair.
     let pack_limit = state.config.max_pack_bytes;
-    let git_write_routes = Router::new()
-        .route("/{owner}/{repo}/git-receive-pack", post(repos::git_receive_pack))
-        .layer(DefaultBodyLimit::disable())
-        .layer(RequestBodyLimitLayer::new(pack_limit))
-        .layer(middleware::from_fn(auth::require_signature));
+    // Per-IP throttle wraps the auth layer (outermost = runs first): flood
+    // traffic is rejected before signature verification burns CPU. Per-DID
+    // limiting is deliberately NOT used here — a DID farm (one throwaway
+    // identity per repo, as in the June 2026 push flood) never trips it.
+    let push_limiter = rate_limit::IpRateLimiter {
+        limiter: state.push_rate_limiter.clone(),
+        trust: state.push_limiter_trust,
+    };
+    let git_write_routes = add_auth_layers(
+        Router::new()
+            .route(
+                "/{owner}/{repo}/git-receive-pack",
+                post(repos::git_receive_pack),
+            )
+            .layer(DefaultBodyLimit::disable())
+            .layer(RequestBodyLimitLayer::new(pack_limit)),
+        state.clone(),
+    )
+    .layer(middleware::from_fn(rate_limit::rate_limit_by_ip))
+    .layer(axum::Extension(push_limiter));
 
     // ── IPFS content-addressed retrieval and pin listing ──────────────────
+    // `/ipfs/{cid}` carries `optional_signature` so `get_by_cid` sees the caller
+    // identity and can apply per-repo visibility (#110); anonymous callers stay
+    // anonymous and still read genuinely public content. `/api/v1/ipfs/pins`
+    // stays unsigned — gating the pin index is tracked separately (#121).
+    // `/ipfs/{cid}` also carries a per-IP flood brake: it is anon-reachable and each
+    // request can drive a full-history git walk, so the per-IP rate limiter is the
+    // outermost layer (rejects a flood before the walk-admission work), mirroring the
+    // push/create routers. The extension MUST be attached or rate_limit_by_ip is a
+    // silent no-op. `/api/v1/ipfs/pins` (no walk) is merged in unbraked, as before.
+    let ipfs_limiter = rate_limit::IpRateLimiter {
+        limiter: state.ipfs_rate_limiter.clone(),
+        trust: state.push_limiter_trust,
+    };
     let ipfs_routes = Router::new()
         .route("/ipfs/{cid}", get(ipfs::get_by_cid))
-        .route("/api/v1/ipfs/pins", get(ipfs::list_pins));
+        .layer(middleware::from_fn(auth::optional_signature))
+        .layer(middleware::from_fn(rate_limit::rate_limit_by_ip))
+        .layer(axum::Extension(ipfs_limiter))
+        .merge(Router::new().route("/api/v1/ipfs/pins", get(ipfs::list_pins)));
 
     // ── Arweave permanent anchors ──────────────────────────────────────────
-    let arweave_routes = Router::new()
-        .route("/api/v1/arweave/anchors", get(arweave::list_anchors));
+    let arweave_routes = Router::new().route("/api/v1/arweave/anchors", get(arweave::list_anchors));
 
     // ── Bounty routes (write — require HTTP Signature) ─────────────────
-    let bounty_write_routes = Router::new()
-        .route("/api/v1/repos/{owner}/{repo}/bounties", post(bounties::create_bounty))
-        .route("/api/v1/bounties/{id}/claim", post(bounties::claim_bounty))
-        .route("/api/v1/bounties/{id}/submit", post(bounties::submit_bounty))
-        .route("/api/v1/bounties/{id}/approve", post(bounties::approve_bounty))
-        .route("/api/v1/bounties/{id}/cancel", post(bounties::cancel_bounty))
-        .layer(middleware::from_fn(auth::require_signature));
+    let bounty_write_routes = add_auth_layers(
+        Router::new()
+            .route(
+                "/api/v1/repos/{owner}/{repo}/bounties",
+                post(bounties::create_bounty),
+            )
+            .route("/api/v1/bounties/{id}/claim", post(bounties::claim_bounty))
+            .route(
+                "/api/v1/bounties/{id}/submit",
+                post(bounties::submit_bounty),
+            )
+            .route(
+                "/api/v1/bounties/{id}/approve",
+                post(bounties::approve_bounty),
+            )
+            .route(
+                "/api/v1/bounties/{id}/cancel",
+                post(bounties::cancel_bounty),
+            )
+            .route(
+                "/api/v1/bounties/{id}/dispute",
+                post(bounties::dispute_bounty),
+            ),
+        state.clone(),
+    );
 
     // ── Bounty routes (read — open) ──────────────────────────────────────
     let bounty_read_routes = Router::new()
-        .route("/api/v1/repos/{owner}/{repo}/bounties", get(bounties::list_repo_bounties))
+        .route(
+            "/api/v1/repos/{owner}/{repo}/bounties",
+            get(bounties::list_repo_bounties),
+        )
         .route("/api/v1/bounties", get(bounties::list_all_bounties))
         .route("/api/v1/bounties/{id}", get(bounties::get_bounty))
-        .route("/api/v1/bounties/{id}/dispute", post(bounties::dispute_bounty))
         .route("/api/v1/bounties/stats", get(bounties::bounty_stats))
-        .route("/api/v1/agents/{did}/bounties", get(bounties::agent_bounty_stats));
+        .route(
+            "/api/v1/agents/{did}/bounties",
+            get(bounties::agent_bounty_stats),
+        )
+        .layer(middleware::from_fn(auth::optional_signature));
 
-    // ── Issue routes ──────────────────────────────────────────────────────
-    let issue_write_routes = Router::new()
-        .route("/api/v1/repos/{owner}/{repo}/issues", post(issues::create_issue))
-        .route("/api/v1/repos/{owner}/{repo}/issues/{id}/close", post(issues::close_issue))
-        .route("/api/v1/repos/{owner}/{repo}/issues/{id}/comments", post(issues::create_issue_comment))
-        .layer(middleware::from_fn(auth::require_signature));
+    // ── Profile routes (write — require HTTP Signature) ─────────────────
+    let profile_write_routes = add_auth_layers(
+        Router::new().route("/api/v1/profile", axum::routing::put(profiles::set_profile)),
+        state.clone(),
+    );
+
+    // ── Issue routes (write — require HTTP Signature, no rate limit) ─────
+    let issue_write_routes = add_auth_layers(
+        Router::new()
+            .route(
+                "/api/v1/repos/{owner}/{repo}/issues/{id}/close",
+                post(issues::close_issue),
+            )
+            .route(
+                "/api/v1/repos/{owner}/{repo}/issues/{id}/comments",
+                post(issues::create_issue_comment),
+            ),
+        state.clone(),
+    );
 
     // ── Peer discovery routes ─────────────────────────────────────────────
-    // announce is intentionally unauthenticated — nodes announce by DID which
-    // is self-proving; rate-limiting and blocklisting are handled elsewhere.
+    // Peer writes accept signatures when present and can require them after a
+    // coordinated live-network upgrade.
     let peer_read_routes = Router::new()
         .route("/api/v1/peers", get(peers::list_peers))
+        .route("/api/v1/peers/{did}/ping", get(peers::ping_peer));
+
+    // /sync/trigger drives an O(peers) outbound fan-out + per-repo enqueue, so it
+    // ALWAYS requires a signature (both config modes) and carries a tight per-IP
+    // brake. A signature alone does not cap cost — a did:key farm self-registers
+    // (INV-10) — so the IP brake is a separate, load-bearing half. The brake is
+    // outermost (runs before signature verification burns CPU) and is keyed on the
+    // client IP before any DID is read, so DID rotation cannot bypass it.
+    let sync_trigger_routes = add_auth_layers(
+        Router::new().route("/api/v1/sync/trigger", post(peers::trigger_sync)),
+        state.clone(),
+    )
+    .layer(middleware::from_fn(rate_limit::rate_limit_by_ip))
+    .layer(axum::Extension(rate_limit::IpRateLimiter {
+        limiter: state.sync_trigger_rate_limiter.clone(),
+        trust: state.push_limiter_trust,
+    }));
+
+    // announce + notify keep their rolling-upgrade signature behavior (unsigned
+    // accepted until all peers upgrade), but both reach peer-write side effects —
+    // notify hits the same enqueue_sync sink as trigger — so they carry a per-IP
+    // brake too, on a SEPARATE bucket from trigger's, so an unsigned notify flood
+    // cannot drain the signed trigger caller's quota.
+    let mut peer_write_routes = Router::new()
         .route("/api/v1/peers/announce", post(peers::announce))
-        .route("/api/v1/peers/{did}/ping", get(peers::ping_peer))
-        .route("/api/v1/sync/trigger", post(peers::trigger_sync))
         .route("/api/v1/sync/notify", post(peers::notify_sync));
+    peer_write_routes = if state.config.require_signed_peer_writes {
+        add_auth_layers(peer_write_routes, state.clone())
+    } else {
+        peer_write_routes.layer(middleware::from_fn(auth::optional_signature))
+    };
+    let peer_write_routes = peer_write_routes
+        .layer(middleware::from_fn(rate_limit::rate_limit_by_ip))
+        .layer(axum::Extension(rate_limit::IpRateLimiter {
+            limiter: state.peer_write_rate_limiter.clone(),
+            trust: state.push_limiter_trust,
+        }));
 
     // ── Read routes — open for public repos ───────────────────────────────
     let read_routes = Router::new()
         .route("/api/v1/repos", get(repos::list_repos))
         .route("/api/v1/repos/federated", get(repos::list_federated_repos))
         .route("/api/v1/repos/{owner}/{repo}", get(repos::get_repo))
-        .route("/api/v1/repos/{owner}/{repo}/commits", get(repos::list_commits))
-        .route("/api/v1/repos/{owner}/{repo}/tree", get(repos::get_tree_root))
-        .route("/api/v1/repos/{owner}/{repo}/tree/{*path}", get(repos::get_tree))
-        .route("/api/v1/repos/{owner}/{repo}/blob/{*path}", get(repos::get_blob))
-        .route("/api/v1/repos/{owner}/{repo}/issues", get(issues::list_issues))
-        .route("/api/v1/repos/{owner}/{repo}/issues/{id}", get(issues::get_issue))
-        .route("/api/v1/repos/{owner}/{repo}/issues/{id}/comments", get(issues::list_issue_comments))
-        .route("/api/v1/repos/{owner}/{repo}/labels", get(labels::list_labels))
+        .route(
+            "/api/v1/repos/{owner}/{repo}/commits",
+            get(repos::list_commits),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/tree",
+            get(repos::get_tree_root),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/tree/{*path}",
+            get(repos::get_tree),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/blob/{*path}",
+            get(repos::get_blob),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/issues",
+            get(issues::list_issues),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/issues/{id}",
+            get(issues::get_issue),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/issues/{id}/comments",
+            get(issues::list_issue_comments),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/labels",
+            get(labels::list_labels),
+        )
         .route("/api/v1/repos/{owner}/{repo}/certs", get(certs::list_certs))
-        .route("/api/v1/repos/{owner}/{repo}/certs/{id}", get(certs::get_cert))
-        .route("/api/v1/repos/{owner}/{repo}/events", get(events::list_repo_events))
+        .route(
+            "/api/v1/repos/{owner}/{repo}/certs/{id}",
+            get(certs::get_cert),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/events",
+            get(events::list_repo_events),
+        )
         .route("/api/v1/agents", get(agents::list_agents))
         .route("/api/v1/agents/{did}", get(agents::show_agent))
         .route("/api/v1/agents/{did}/trust", get(agents::get_trust))
+        .route("/api/v1/agents/{did}/profile", get(profiles::get_profile))
         .route("/api/v1/events/ref-updates", get(events::list_ref_updates))
         .route("/api/v1/resolve/{did}", get(resolve::resolve_did))
         .route("/api/v1/repos/{owner}/{repo}/pulls", get(pulls::list_prs))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}", get(pulls::get_pr))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/diff", get(pulls::get_pr_diff))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/reviews", get(pulls::list_reviews))
-        .route("/api/v1/repos/{owner}/{repo}/pulls/{number}/comments", get(pulls::list_comments))
-        .route("/api/v1/repos/{owner}/{repo}/hooks", get(webhooks::list_webhooks))
+        .route(
+            "/api/v1/repos/{owner}/{repo}/pulls/{number}",
+            get(pulls::get_pr),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/pulls/{number}/diff",
+            get(pulls::get_pr_diff),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/pulls/{number}/reviews",
+            get(pulls::list_reviews),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/pulls/{number}/comments",
+            get(pulls::list_comments),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/hooks",
+            get(webhooks::list_webhooks),
+        )
         .route("/api/v1/repos/{owner}/{repo}/refs", get(repos::list_refs))
-        .route("/api/v1/repos/{owner}/{repo}/branches/protected", get(protect::list_protected_branches))
-        .route("/api/v1/repos/{owner}/{repo}/changelog", get(changelog::get_changelog))
-        .route("/api/v1/repos/{owner}/{repo}/star", get(stars::get_star_status))
-        .route("/{owner}/{repo}/info/refs", get(repos::git_info_refs));
+        .route(
+            "/api/v1/repos/{owner}/{repo}/branches/protected",
+            get(protect::list_protected_branches),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/changelog",
+            get(changelog::get_changelog),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/star",
+            get(stars::get_star_status),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/replicas",
+            get(replicas::list_replicas),
+        )
+        .layer(middleware::from_fn(auth::optional_signature));
 
     // git-upload-pack (clone/fetch) — same raised body limit as receive-pack so
     // large pack responses from the server don't get truncated on the client side.
     let git_read_routes = Router::new()
-        .route("/{owner}/{repo}/git-upload-pack", post(repos::git_upload_pack))
+        .route("/{owner}/{repo}/info/refs", get(repos::git_info_refs))
+        .route(
+            "/{owner}/{repo}/git-upload-pack",
+            post(repos::git_upload_pack),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/withheld-paths",
+            axum::routing::get(visibility::withheld_paths),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/icaptcha-proof",
+            axum::routing::get(repos::get_icaptcha_proof),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/encrypted-blobs",
+            axum::routing::get(crate::api::encrypted::list_encrypted_blobs),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/encrypted-blob/{oid}",
+            axum::routing::get(crate::api::encrypted::get_encrypted_blob),
+        )
+        .route(
+            "/api/v1/repos/{owner}/{repo}/encrypted-blobs/replicate",
+            axum::routing::get(crate::api::encrypted::replicate_encrypted_blobs),
+        )
         .layer(DefaultBodyLimit::disable())
-        .layer(RequestBodyLimitLayer::new(pack_limit));
+        .layer(RequestBodyLimitLayer::new(pack_limit))
+        .layer(middleware::from_fn(auth::optional_signature));
 
     // ── Meta ──────────────────────────────────────────────────────────────
     let meta_routes = Router::new()
         .route("/", get(node_info))
         .route("/health", get(health))
+        .route("/ready", get(ready))
         .route("/api/v1/p2p/info", get(p2p_info))
         .route("/api/v1/stats", get(stats))
         .route("/api/v1/contracts", get(contracts_info));
@@ -179,12 +477,16 @@ pub fn build_router(state: AppState) -> Router {
         .merge(task_read_routes)
         .merge(bounty_write_routes)
         .merge(bounty_read_routes)
+        .merge(profile_write_routes)
+        .merge(creation_routes)
         .merge(write_routes)
         .merge(git_write_routes)
         .merge(git_read_routes)
         .merge(issue_write_routes)
         .merge(read_routes)
         .merge(peer_read_routes)
+        .merge(peer_write_routes)
+        .merge(sync_trigger_routes)
         .merge(ipfs_routes)
         .merge(arweave_routes)
         .merge(meta_routes)
@@ -207,6 +509,26 @@ async fn health() -> Json<serde_json::Value> {
     Json(json!({ "status": "ok" }))
 }
 
+/// Readiness = "this node can serve real traffic", and every real endpoint
+/// depends on the database, so probe it rather than reporting a constant.
+/// The probe gets its own short bound so a wedged pool can't hang the health
+/// check for the full acquire timeout.
+async fn ready(State(state): State<AppState>) -> axum::response::Response {
+    let probe = tokio::time::timeout(std::time::Duration::from_secs(2), state.db.ping()).await;
+    match probe {
+        Ok(Ok(())) => Json(json!({ "status": "ready" })).into_response(),
+        _ => (
+            axum::http::StatusCode::SERVICE_UNAVAILABLE,
+            Json(json!({
+                "status": "degraded",
+                "error": crate::error::DB_UNAVAILABLE_CODE,
+                "message": crate::error::DB_UNAVAILABLE_MESSAGE,
+            })),
+        )
+            .into_response(),
+    }
+}
+
 async fn node_info(State(state): State<AppState>) -> Json<serde_json::Value> {
     let p2p_peer_id = state.p2p.as_ref().map(|h| h.local_peer_id.to_string());
     Json(json!({
@@ -221,8 +543,31 @@ async fn node_info(State(state): State<AppState>) -> Json<serde_json::Value> {
     }))
 }
 
-async fn stats(State(state): State<AppState>) -> Json<serde_json::Value> {
-    let repos = state.db.list_all_repos().await.map(|r| r.len() as i64).unwrap_or(0);
+pub(crate) async fn stats(State(state): State<AppState>) -> Json<serde_json::Value> {
+    // Count only the repos an anonymous caller could list, so the aggregate does
+    // not leak the existence of private/mode-A repos (#104 count oracle). Mirror
+    // the listing seam (api/repos.rs): over-fetch the deduped set, batch-load the
+    // visibility rules, and keep rows that pass listable_at_root. The caller is
+    // always None — meta_routes carries no auth layer (see the route group in this
+    // file). Fail closed: any DB error collapses the whole count to 0 (an
+    // under-count never leaks existence), preserving the prior `.unwrap_or(0)`.
+    let repos = async {
+        // stats only needs the count, so use the no-stars deduped list (same
+        // DEDUP_CTE) and skip the repo_stars aggregation the listing path needs.
+        let rows = state.db.list_all_repos_deduped().await?;
+        let ids: Vec<String> = rows.iter().map(|r| r.id.clone()).collect();
+        let rules_by_repo = state.db.list_visibility_rules_for_repos(&ids).await?;
+        let count = rows
+            .iter()
+            .filter(|r| {
+                let rules = rules_by_repo.get(&r.id).map(Vec::as_slice).unwrap_or(&[]);
+                crate::visibility::listable_at_root(rules, r.is_public, &r.owner_did, None)
+            })
+            .count() as i64;
+        Ok::<i64, anyhow::Error>(count)
+    }
+    .await
+    .unwrap_or(0);
     let agents = state.db.count_agents().await.unwrap_or(0);
     let pushes = state.db.count_pushes().await.unwrap_or(0);
     Json(json!({
@@ -237,7 +582,11 @@ async fn contracts_info(State(state): State<AppState>) -> Json<serde_json::Value
     let did_registry = &state.config.contract_did_registry;
     let name_registry = &state.config.contract_name_registry;
     let rpc_url = &state.config.chain_rpc_url;
-    let chain_id: u64 = if rpc_url.contains("sepolia") { 84532 } else { 8453 };
+    let chain_id: u64 = if rpc_url.contains("sepolia") {
+        84532
+    } else {
+        8453
+    };
     Json(serde_json::json!({
         "chain": if chain_id == 8453 { "base" } else { "base-sepolia" },
         "chain_id": chain_id,
@@ -255,11 +604,18 @@ async fn contracts_info(State(state): State<AppState>) -> Json<serde_json::Value
 
 async fn p2p_info(State(state): State<AppState>) -> Json<serde_json::Value> {
     match &state.p2p {
-        Some(h) => Json(json!({
-            "enabled": true,
-            "peer_id": h.local_peer_id.to_string(),
-            "topics": [crate::p2p::REF_UPDATES_TOPIC],
-        })),
+        Some(h) => {
+            let status = h.status().await;
+            Json(json!({
+                "enabled": true,
+                "peer_id": h.local_peer_id.to_string(),
+                "topics": [crate::p2p::REF_UPDATES_TOPIC],
+                "connected_peers": status.as_ref().map(|s| s.connected_peers),
+                "gossipsub_mesh_peers": status.as_ref().map(|s| s.gossipsub_mesh_peers),
+                "gossipsub_all_peers": status.as_ref().map(|s| s.gossipsub_all_peers),
+                "listen_addrs": status.as_ref().map(|s| s.listen_addrs.clone()),
+            }))
+        }
         None => Json(json!({ "enabled": false })),
     }
 }

crates/gitlawb-node/src/state.rs

@@ -1,11 +1,12 @@
-use std::sync::Arc;
 use gitlawb_core::did::Did;
 use gitlawb_core::identity::Keypair;
+use std::sync::Arc;
 
 use crate::config::Config;
 use crate::db::Db;
 use crate::git::repo_store::RepoStore;
 use crate::p2p::P2pHandle;
+use crate::rate_limit::RateLimiter;
 
 #[derive(Clone, Debug)]
 pub struct RefUpdateBroadcast {
@@ -48,4 +49,383 @@ pub struct AppState {
     pub machine_id: Option<String>,
     /// Centralized repo storage: local disk cache + optional Tigris backend
     pub repo_store: RepoStore,
+    /// Per-DID rate limiter for creation endpoints (repos, issues, PRs)
+    pub rate_limiter: RateLimiter,
+    /// Per-client-IP rate limiter for the same creation endpoints. The per-DID
+    /// limiter above cannot brake a creation flood from a DID farm — one
+    /// throwaway `did:key` per repo means each DID makes a single create call
+    /// and never trips its own bucket. A valid iCaptcha proof does not cap this
+    /// either: the enforced level draws only machine-solvable deterministic
+    /// challenges (and the caller can pin the easy type), so a bot mints a fresh
+    /// DID, solves a proof, and creates a repo unthrottled. Braking on the
+    /// resolved client IP is what actually stops a single-source flood (same
+    /// rationale as `push_rate_limiter`). Keyed by `push_limiter_trust`.
+    pub create_ip_rate_limiter: RateLimiter,
+    /// Per-client-IP rate limiter for git-receive-pack. Per-DID limits cannot
+    /// brake a push flood from a DID farm (one throwaway DID per repo), so the
+    /// push path throttles on the resolved client IP instead.
+    pub push_rate_limiter: RateLimiter,
+    /// Per-client-IP ROUTE brake for `GET /ipfs/{cid}`: charged ONCE per request by the
+    /// `rate_limit_by_ip` middleware (server.rs), never inside the handler. It bounds
+    /// request RATE (the "requests per hour" contract of `GITLAWB_IPFS_RATE_LIMIT`) on
+    /// the non-farmable source IP, so an anonymous flood of the public route is capped.
+    /// The per-probe/per-walk WORK accounting the resolver does WITHIN a request draws
+    /// from the SEPARATE `ipfs_work_rate_limiter` below — the two cannot share one bucket
+    /// or a single request that spends a route token and then its own probe token off the
+    /// same bucket is admitted at the route and falsely shed mid-request (#173 round-10,
+    /// R6). Keyed by `push_limiter_trust`.
+    pub ipfs_rate_limiter: RateLimiter,
+    /// Per-client-IP WORK-budget limiter for the `GET /ipfs/{cid}` resolver's internal
+    /// fan-out: charged per legacy (NULL-provenance) PROBE (`acquire` + `cat-file`) and
+    /// per provenance-path WALK, and peeked non-consuming before the O(repos) legacy
+    /// preload. A legacy CID from the public pins index otherwise lets one request drive
+    /// O(repos) subprocess spawns and cold Tigris fetches, and repeat requests amplify
+    /// that across requests with zero limiter contact (INV-10, F3). Charging the work to
+    /// the non-farmable source IP bounds it. A bucket DISTINCT from the route brake above:
+    /// one request legitimately spends many work tokens (a full legacy scan is up to
+    /// `ipfs_max_legacy_probes` probes), so it must not double as the once-per-request
+    /// route bucket. Capacity is DERIVED from the route limit (`AppState::ipfs_work_budget`,
+    /// no separate operator knob), floored at the legacy-probe budget so a single default-
+    /// config deep search never self-throttles mid-scan. Keyed by `push_limiter_trust`.
+    pub ipfs_work_rate_limiter: RateLimiter,
+    /// Per-request ceiling on full-history reachability walks the CID resolver
+    /// may spawn (default `api::ipfs::MAX_HISTORY_WALKS_PER_REQUEST`). A field,
+    /// not a bare const, so tests can shrink it to exercise the cap cheaply;
+    /// production keeps the const default.
+    pub ipfs_max_history_walks: u32,
+    /// Per-request ceiling on legacy (NULL-provenance) repo probes in the CID
+    /// resolver's scan fallback (default `api::ipfs::MAX_LEGACY_PROBES_PER_REQUEST`).
+    /// Bounds the anonymous `acquire` + `cat-file` fan-out across the node (#173,
+    /// INV-10); a field for the same test-seam reason as `ipfs_max_history_walks`.
+    pub ipfs_max_legacy_probes: u32,
+    /// Hard ceiling on the byte size of an object `GET /ipfs/{cid}` will buffer and
+    /// serve (default `api::ipfs::MAX_SERVED_OBJECT_BYTES`). The serve reads via a
+    /// blocking `git cat-file` and buffers the whole object; without a bound a large
+    /// public blob could exhaust memory or block a runtime worker (#173, F6, INV-10).
+    /// A field for the same test-seam reason as the sibling caps.
+    pub ipfs_max_served_object_bytes: u64,
+    /// Which forwarded header (if any) the edge is trusted to set, for
+    /// resolving the push limiter's client-IP key. See `GITLAWB_TRUSTED_PROXY`.
+    /// Node-wide; also keys the two peer-sync limiters below.
+    pub push_limiter_trust: crate::rate_limit::TrustedProxy,
+    /// Per-client-IP limiter for `POST /api/v1/sync/trigger` (tight). The route
+    /// requires a signature, but a signature does not cap cost (a did:key farm
+    /// self-registers), and its per-call cost is an O(peers) fan-out, so the IP
+    /// brake is a separate, load-bearing half. Its own bucket so an unsigned
+    /// `/sync/notify` flood cannot drain the signed trigger caller's quota.
+    pub sync_trigger_rate_limiter: RateLimiter,
+    /// Per-client-IP limiter for the peer-write routes (`/peers/announce`,
+    /// `/sync/notify`) (generous). `/sync/notify` reaches the same `enqueue_sync`
+    /// sink as trigger and accepts unsigned requests from known peers, so it is
+    /// braked too; each peer's distinct IP gets its own bucket.
+    pub peer_write_rate_limiter: RateLimiter,
+    /// Process-wide graceful-shutdown signal. Sending `true` causes every
+    /// task that holds a `watch::Receiver` to exit at its next await point.
+    /// Used by:
+    ///   * the SIGINT/SIGTERM handler in `main()`
+    ///   * axum's `with_graceful_shutdown` to drain in-flight HTTP requests
+    ///   * the libp2p swarm task
+    ///   * the gossip, sync, operator heartbeat, and rate-limit cleanup loops
+    pub shutdown_tx: tokio::sync::watch::Sender<bool>,
+    /// Bounds concurrent served git READ operations (upload-pack + both info/refs
+    /// advertisements). A read handler acquires a permit before spawning git and
+    /// holds it for the op; when none are free the request is shed with a 503.
+    /// Writes draw from `git_write_semaphore` so a read flood cannot shed an
+    /// authenticated push at admission (#174).
+    pub git_read_semaphore: Arc<tokio::sync::Semaphore>,
+    /// Bounds concurrent `git-receive-pack` (push) operations, a pool separate
+    /// from `git_read_semaphore` so an anonymous READ flood can never shed an
+    /// authenticated push (#174). Sized by `max_concurrent_git_pushes`. Drawn from
+    /// by the `git-receive-pack` POST (owner-gated) ONLY. The anon-reachable
+    /// receive-pack `info/refs` advertisement draws from the SEPARATE
+    /// `git_push_advert_semaphore` below, never this pool, so a multi-source flood
+    /// of push-handshake advertisements can never occupy a permit an authenticated
+    /// POST needs at admission (#174).
+    pub git_write_semaphore: Arc<tokio::sync::Semaphore>,
+    /// Bounds concurrent anon-reachable `git-receive-pack` `info/refs`
+    /// advertisements — a pool SEPARATE from `git_write_semaphore` so adverts (which
+    /// hold a permit across `acquire_fresh` + `info/refs`) can never consume a slot
+    /// the authenticated POST relies on. A per-source flood can at worst exhaust this
+    /// advert pool (each source also capped by `git_push_advert_per_caller` and the
+    /// per-IP push rate limiter), and the reserved POST pool is untouched (#174).
+    pub git_push_advert_semaphore: Arc<tokio::sync::Semaphore>,
+    /// Bounds concurrent post-push encrypt-then-pin history walks. Each successful
+    /// path-scoped push releases its handler write permit and then runs a DETACHED
+    /// full-history walk (`withheld_blob_recipients_bounded`) to seal withheld blobs;
+    /// without a cap, N fast pushes spawn N concurrent full-history git walks past
+    /// `max_concurrent_git_pushes` (which only bounds the in-handler phase). The walk
+    /// acquires a permit here and DEFERS (blocks) when the pool is full rather than
+    /// shedding — the work is background and dropping it would lose the recovery copy
+    /// (#174 P1-e). A pool of its own, not `git_write_semaphore`: a long background
+    /// walk must not hold a foreground write slot, and a handler already holding a
+    /// write permit that needed a second would self-deadlock at pool size 1.
+    pub git_encrypt_semaphore: Arc<tokio::sync::Semaphore>,
+    /// Bounds the OUTSTANDING post-push encryption-task set by per-repo coalescing
+    /// (#174 P2-2). `git_encrypt_semaphore` caps *active* walks; this caps how many
+    /// detached tasks *spawn and park* on that semaphore's `acquire_owned().await`.
+    /// Before spawning a per-push encryption task, the receive-pack handler consults
+    /// this set: if the repo already has a task in flight it coalesces (skips the
+    /// duplicate spawn) rather than parking a new unbounded waiter. Coalescing only
+    /// delays a duplicate walk — it never drops the withheld-blob recovery copy, which
+    /// `2a54c15` deliberately kept fail-closed (there is no reconciliation sweep to
+    /// re-derive a dropped copy). See [`EncryptInflight`].
+    pub encrypt_inflight: EncryptInflight,
+    /// Per-caller concurrency sub-cap on the read pool: each caller (keyed on the
+    /// resolved source IP, #174 U1) may hold at most `max_concurrent_reads_per_caller`
+    /// in-flight read ops, so one caller cannot monopolize `git_read_semaphore`
+    /// (#174). Applied by `git_upload_pack` and the upload-pack `info/refs`
+    /// advertisement.
+    pub git_read_per_caller: crate::rate_limit::PerCallerConcurrency,
+    /// Per-source concurrency sub-cap on the anon-reachable receive-pack `info/refs`
+    /// advertisement: each source IP may hold at most a small share of the write
+    /// pool, so a multi-source flood of push-handshake advertisements cannot
+    /// saturate `git_write_semaphore` and shed authenticated pushes (#174). Sized as
+    /// a fraction of `max_concurrent_git_pushes`, so filling the write pool takes many
+    /// distinct source IPs (each also braked by the per-IP push rate limiter).
+    pub git_push_advert_per_caller: crate::rate_limit::PerCallerConcurrency,
+    /// Per-source concurrency sub-cap on the authenticated `git-receive-pack` POST:
+    /// each source IP may hold at most a small share of `git_write_semaphore`, so one
+    /// host minting disposable `did:key` identities cannot open enough slow pushes to
+    /// monopolize the write pool and 503 every other source's push (#174 P1-d). Keyed
+    /// on the resolved source IP (never the DID — a DID farm defeats a DID key). Sized
+    /// like `git_push_advert_per_caller`, a fraction of `max_concurrent_git_pushes`.
+    pub git_write_per_caller: crate::rate_limit::PerCallerConcurrency,
+    /// Bounds concurrent `GET /ipfs/{cid}` visibility-walk requests. The public
+    /// `/ipfs/{cid}` route runs `allowed_blob_set_for_caller_bounded` in
+    /// `spawn_blocking` (a full-history git walk) with NO served-git admission of its
+    /// own; without this a permissionless caller fans out concurrent walks past every
+    /// git pool, exhausting the blocking pool + PIDs (#174 P1-3). A request acquires a
+    /// permit before the repo loop and holds it for the whole request (across every
+    /// `spawn_blocking` walk), so the slot reflects real thread occupancy — a tokio
+    /// walk-timeout cannot free it while the blocking work still runs. A pool of its
+    /// own (`max_concurrent_ipfs_walks`), NOT a git pool: distinct cost center + public
+    /// surface, so anonymous /ipfs traffic can never shed an authenticated git op.
+    pub git_ipfs_walk_semaphore: Arc<tokio::sync::Semaphore>,
+    /// Per-source concurrency sub-cap on the `/ipfs/{cid}` walk pool: each source
+    /// (keyed on the resolved source IP, never the DID — `/ipfs` admits any `did:key`
+    /// unthrottled, so a DID key would be free to mint around) may hold at most
+    /// `ipfs_walk_per_source` in-flight walk slots, so one source cannot monopolize
+    /// `git_ipfs_walk_semaphore` (#174 P1-3). A request with no resolvable key is
+    /// bounded by the global pool only, never this sub-cap. The key map is bounded
+    /// (`with_default_max_keys`, reject-before-insert) so a source-key farm cannot grow
+    /// it (INV-15).
+    pub git_ipfs_walk_per_caller: crate::rate_limit::PerCallerConcurrency,
+    /// The `git` executable the served-git withheld-blob walk spawns. Production is
+    /// `"git"` (resolved via PATH); injectable so a fake `git` can drive the walk's
+    /// process-group teardown in handler tests without mutating the process-global
+    /// PATH (#174).
+    pub git_bin: String,
+}
+
+impl AppState {
+    /// Subscribe to the shutdown signal. Returns a fresh receiver whose
+    /// initial value matches the current state.
+    pub fn subscribe_shutdown(&self) -> tokio::sync::watch::Receiver<bool> {
+        self.shutdown_tx.subscribe()
+    }
+
+    /// Sweep expired entries from every per-IP/DID rate limiter. Driven by the
+    /// periodic cleanup task so a bounded limiter's key map sheds stale entries
+    /// instead of sitting near its cap until an inline capacity sweep reclaims
+    /// them. Every limiter on the state is swept here; adding a new limiter means
+    /// adding it to this list.
+    pub(crate) async fn sweep_rate_limiters(&self) {
+        self.rate_limiter.cleanup().await;
+        self.create_ip_rate_limiter.cleanup().await;
+        self.push_rate_limiter.cleanup().await;
+        self.ipfs_rate_limiter.cleanup().await;
+        self.ipfs_work_rate_limiter.cleanup().await;
+        self.sync_trigger_rate_limiter.cleanup().await;
+        self.peer_write_rate_limiter.cleanup().await;
+    }
+
+    /// Trigger graceful shutdown. Idempotent — calling more than once
+    /// has no effect. Returns `true` if this call was the one that
+    /// flipped the signal.
+    #[allow(dead_code)] // used by tests; main() drives the signal directly
+    pub fn shutdown(&self) -> bool {
+        self.shutdown_tx.send_if_modified(|v| {
+            if *v {
+                false
+            } else {
+                *v = true;
+                true
+            }
+        })
+    }
+
+    /// `true` once shutdown has been signalled.
+    #[allow(dead_code)] // used by tests and any future handler that wants to short-circuit
+    pub fn is_shutting_down(&self) -> bool {
+        *self.shutdown_tx.borrow()
+    }
+
+    /// Legacy-probe budget wired from the `GITLAWB_IPFS_MAX_REPOS_WALKED` operator
+    /// knob (R5, KTD5). The knob seeds `ipfs_max_legacy_probes` at construction so it
+    /// controls the per-request legacy (NULL-provenance) probe fan-out it advertises.
+    /// It deliberately does NOT feed `ipfs_max_history_walks`: that ceiling must stay
+    /// at `MAX_HISTORY_WALKS_PER_REQUEST` (`MAX_PIN_SOURCES + 1`) or a provenanced
+    /// request with a full source set is truncated into a false 503, and the knob's
+    /// range starts at 1. The knob is `usize`, the field `u32`; the range cap
+    /// (1_048_576) keeps the cast lossless.
+    pub(crate) fn ipfs_legacy_probe_budget(config: &crate::config::Config) -> u32 {
+        config.ipfs_max_repos_walked as u32
+    }
+
+    /// Work-budget capacity for [`ipfs_work_rate_limiter`](Self#structfield.ipfs_work_rate_limiter)
+    /// (R6, KTD6), DERIVED from the route limit rather than a new operator knob. The route
+    /// limiter (`ipfs_rate_limiter`) charges once per request; this separate bucket absorbs
+    /// the resolver's per-probe/per-walk work charges so both the route "requests per hour"
+    /// contract and the amplification bound hold. Floor: at least one full legacy search per
+    /// window — the effective `ipfs_max_legacy_probes` (the `GITLAWB_IPFS_MAX_REPOS_WALKED`
+    /// knob, U4) — so a single default-config deep search cannot self-throttle mid-scan and
+    /// recreate the F6 admit-then-429 for a legitimate caller. `GITLAWB_IPFS_RATE_LIMIT=0`
+    /// disables the route brake and this derived bucket alike (a 0-capacity limiter admits
+    /// everything).
+    pub(crate) fn ipfs_work_budget(config: &crate::config::Config) -> usize {
+        if config.ipfs_rate_limit == 0 {
+            return 0;
+        }
+        config.ipfs_rate_limit.max(config.ipfs_max_repos_walked)
+    }
+}
+
+/// Bounds the OUTSTANDING post-push encryption-task set by per-repo coalescing
+/// (#174 P2-2). Each successful path-scoped push `tokio::spawn`s a DETACHED task that
+/// parks on `git_encrypt_semaphore.acquire_owned().await` (which DEFERS when the pool
+/// is full rather than shedding — `2a54c15` kept it fail-closed so the withheld-blob
+/// recovery copy is never dropped). The semaphore caps *active* walks, but nothing
+/// capped how many detached tasks *spawn and park* on that await: N rapid pushes to a
+/// repo spawn N parked tasks, each holding cloned object lists/rules/paths/keys — an
+/// unbounded outstanding set.
+///
+/// This tracks the repo keys with an in-flight encryption task, each carrying a
+/// DIRTY flag. Before spawning, the handler calls [`try_begin`](Self::try_begin): if
+/// a task for the repo is already in-flight it MARKS THE REPO DIRTY and returns `None`
+/// so the handler SKIPS spawning a duplicate (coalesce). The in-flight task consults
+/// the flag at its tail via [`requeue_or_release`](EncryptInflightGuard::requeue_or_release):
+/// a set flag makes it run ONE MORE pass (re-reading repo state) before it exits, so a
+/// push coalesced during the in-flight window is REQUEUED, never dropped. This bounds
+/// the outstanding set to <=1 task per repo without losing work: there is no
+/// reconciliation sweep, so a *dropped* job would be lost forever.
+///
+/// The returned [`EncryptInflightGuard`] is moved into the detached task. The normal
+/// exit path is `requeue_or_release`, which removes the repo key ATOMICALLY with the
+/// "clean" decision — no push can land in the gap between "checked clean" and "task
+/// exits". `Drop` is a panic backstop only: if the task panics (or returns without
+/// calling `requeue_or_release`) it still removes the key so a crashed walk can never
+/// permanently lock a repo out of future recovery copies.
+#[derive(Clone, Default)]
+pub struct EncryptInflight {
+    // std::sync::Mutex: only ever held for O(1) HashMap ops in a sync context (before
+    // `tokio::spawn`, at the task tail, and in Drop) — never across an await, so a std
+    // Mutex is correct and cheaper than a tokio one. The value is the DIRTY flag: a
+    // coalesced push flips it true so the in-flight task requeues one more pass.
+    repos: Arc<std::sync::Mutex<std::collections::HashMap<String, bool>>>,
+}
+
+impl EncryptInflight {
+    pub fn new() -> Self {
+        Self::default()
+    }
+
+    /// Try to begin an encryption task for `repo_id`. Returns `Some(guard)` if no task
+    /// for the repo was in-flight (the caller should spawn). If one already is, MARKS
+    /// the repo dirty and returns `None` (the caller COALESCES — skips the duplicate
+    /// spawn; the in-flight task requeues one more pass to cover this push).
+    pub fn try_begin(&self, repo_id: &str) -> Option<EncryptInflightGuard> {
+        let mut map = self.repos.lock().expect("encrypt_inflight mutex poisoned");
+        match map.get_mut(repo_id) {
+            Some(dirty) => {
+                *dirty = true;
+                None
+            }
+            None => {
+                map.insert(repo_id.to_string(), false);
+                Some(EncryptInflightGuard {
+                    repos: Arc::clone(&self.repos),
+                    repo_id: repo_id.to_string(),
+                    released: false,
+                })
+            }
+        }
+    }
+
+    /// Number of repos with an in-flight encryption task. Test/metrics observability;
+    /// the bound under saturation is `len() <= number of distinct repos`, i.e. at most
+    /// one task per repo.
+    #[allow(dead_code)]
+    pub fn len(&self) -> usize {
+        self.repos
+            .lock()
+            .expect("encrypt_inflight mutex poisoned")
+            .len()
+    }
+
+    #[allow(dead_code)]
+    pub fn is_empty(&self) -> bool {
+        self.len() == 0
+    }
+
+    /// Test-only: read the dirty flag for `repo_id` (`None` if no task is in-flight).
+    #[cfg(test)]
+    pub fn dirty(&self, repo_id: &str) -> Option<bool> {
+        self.repos
+            .lock()
+            .expect("encrypt_inflight mutex poisoned")
+            .get(repo_id)
+            .copied()
+    }
+}
+
+/// RAII guard for one in-flight encryption task's repo key. The task drives it at its
+/// tail with [`requeue_or_release`](Self::requeue_or_release); `Drop` is a panic
+/// backstop. Move-only — cloning would double-release.
+pub struct EncryptInflightGuard {
+    repos: Arc<std::sync::Mutex<std::collections::HashMap<String, bool>>>,
+    repo_id: String,
+    released: bool,
+}
+
+impl EncryptInflightGuard {
+    /// TASK-TAIL check-and-clear, atomic with the release decision. If a push
+    /// coalesced since the last pass (dirty), clear the flag and return `true` (the
+    /// task loops one more pass). Otherwise remove the key and return `false` (the task
+    /// exits). Atomic under the mutex: a concurrent push either sets the flag BEFORE
+    /// this reads it (-> requeue covers it) or arrives AFTER the key is removed (-> a
+    /// fresh `try_begin` spawns a new task) — there is no window where the key is
+    /// present-but-clean while the task exits.
+    pub fn requeue_or_release(&mut self) -> bool {
+        let mut map = self.repos.lock().expect("encrypt_inflight mutex poisoned");
+        match map.get_mut(&self.repo_id) {
+            Some(dirty) if *dirty => {
+                *dirty = false;
+                true
+            }
+            _ => {
+                map.remove(&self.repo_id);
+                self.released = true;
+                false
+            }
+        }
+    }
+}
+
+impl Drop for EncryptInflightGuard {
+    fn drop(&mut self) {
+        // Panic backstop ONLY. The normal exit is `requeue_or_release` (which removed
+        // the key atomically and set `released`), so this does nothing then. If the
+        // task panicked or returned without releasing, remove the key so one crashed
+        // walk never permanently locks the repo out.
+        //
+        // Accepted residual: a panic with the dirty flag still set drops the requeued
+        // work — Drop cannot loop — the same loss class as the on-panic behavior before
+        // this change. No reconciliation sweep re-derives it.
+        if self.released {
+            return;
+        }
+        if let Ok(mut map) = self.repos.lock() {
+            map.remove(&self.repo_id);
+        }
+    }
 }

crates/gitlawb-node/src/visibility.rs

@@ -0,0 +1,873 @@
+//! Pure read-authorization logic for path-scoped visibility.
+//!
+//! `visibility_check` decides whether a caller may read a given path in a repo,
+//! based on the repo's visibility rules with a fallback to the legacy
+//! `is_public` flag. It performs no I/O so it is exhaustively unit tested.
+
+use crate::db::{RepoRecord, VisibilityRule};
+use std::collections::HashMap;
+use unicode_normalization::UnicodeNormalization;
+
+#[derive(Debug, PartialEq, Eq)]
+pub enum Decision {
+    Allow,
+    Deny,
+}
+
+/// NFC-normalize a glob prefix or path so the matcher compares canonically
+/// equivalent strings byte-for-byte. Without this, a deny rule authored NFC
+/// (`é` = U+00E9) byte-compares unequal to a path committed NFD (`e` + U+0301)
+/// and the blob slips past the rule on the replication path (#101). NFC, not
+/// NFKC: compatibility folding (ligatures, full-width forms) would merge paths
+/// the filesystem treats as distinct and over-withhold. Both sides of every
+/// comparison must pass through this, or the skew just moves.
+fn nfc(s: &str) -> String {
+    s.nfc().collect()
+}
+
+/// True if `caller` is the repo owner. Uses [`crate::api::did_matches`] so the
+/// owner check is representation-agnostic within `did:key` (full `did:key:z...`
+/// matches bare `z...` stored by mirror rows) while still denying cross-method
+/// collisions (`did:gitlawb:z...` vs bare `z...`).
+fn is_owner(owner_did: &str, caller: &str) -> bool {
+    crate::api::did_matches(owner_did, caller)
+}
+
+/// The match prefix for a glob: "/" stays "/", "/secret/**" becomes "/secret".
+fn glob_prefix(glob: &str) -> &str {
+    let p = glob.trim_end_matches("**").trim_end_matches('/');
+    if p.is_empty() {
+        "/"
+    } else {
+        p
+    }
+}
+
+/// Does `glob` match `path`? "/" matches everything; "/secret" matches
+/// "/secret" and any "/secret/..." descendant.
+fn glob_matches(glob: &str, path: &str) -> bool {
+    let prefix = glob_prefix(glob);
+    if prefix == "/" {
+        return true;
+    }
+    // Compare in NFC so an NFC rule matches a canonically-equivalent NFD path
+    // (and vice versa). Both sides normalized here — the single matcher seam.
+    let prefix = nfc(prefix);
+    let path = nfc(path);
+    path == prefix || path.starts_with(&format!("{prefix}/"))
+}
+
+/// Specificity = length of the (normalized) match prefix; longer is more
+/// specific. Normalized so ranking stays consistent with `glob_matches`.
+fn specificity(glob: &str) -> usize {
+    nfc(glob_prefix(glob)).len()
+}
+
+/// Decide whether `caller` (None = anonymous) may read `path` in a repo.
+/// `path` is "/" for a whole-repo clone/fetch.
+///
+/// Reader DIDs in a rule are matched exactly, so they must be stored in full
+/// `did:key:...` form. The owner is the only identity matched in both full and
+/// short form.
+pub fn visibility_check(
+    rules: &[VisibilityRule],
+    is_public: bool,
+    owner_did: &str,
+    caller: Option<&str>,
+    path: &str,
+) -> Decision {
+    // The owner can always read everything.
+    if let Some(c) = caller {
+        if is_owner(owner_did, c) {
+            return Decision::Allow;
+        }
+    }
+
+    // Most-specific matching rule wins. On equal specificity the last rule in
+    // DB order is chosen; `list_visibility_rules` orders by `path_glob`, so this
+    // is deterministic.
+    let best = rules
+        .iter()
+        .filter(|r| glob_matches(&r.path_glob, path))
+        .max_by_key(|r| specificity(&r.path_glob));
+
+    match best {
+        Some(rule) => {
+            // Phase 1 treats every matching rule as an allow-list keyed by
+            // `reader_dids`. `rule.mode` (A vs B) is stored from day one but not
+            // acted on here; it governs replication behavior in Phases 2-3.
+            let allowed = caller
+                .map(|c| rule.reader_dids.iter().any(|d| d == c))
+                .unwrap_or(false);
+            if allowed {
+                Decision::Allow
+            } else {
+                Decision::Deny
+            }
+        }
+        None => {
+            if is_public {
+                Decision::Allow
+            } else {
+                Decision::Deny
+            }
+        }
+    }
+}
+
+/// Whether `caller` (None = anonymous) may see a repo in a listing — the `"/"`
+/// visibility decision, shared by every repo-listing surface (REST list,
+/// federated list, GraphQL `repos`) so they enforce one rule, not three drifting
+/// copies. Not a bare `is_public` test: a repo can be `is_public=false` with a
+/// root rule granting readers, or `is_public=true` with a root deny (#97).
+pub fn listable_at_root(
+    rules: &[VisibilityRule],
+    is_public: bool,
+    owner_did: &str,
+    caller: Option<&str>,
+) -> bool {
+    visibility_check(rules, is_public, owner_did, caller, "/") == Decision::Allow
+}
+
+/// Whether a single `received_ref_updates` row (identified by its peer-supplied
+/// `row_repo` slug) should be shown to `caller` (None = anonymous) on the
+/// cross-repo ref-updates feeds (#112 GraphQL, #114 REST).
+///
+/// Pure and I/O-free: both call sites load the deduped local repo set and its
+/// visibility rules once per request and pass them in, so the gate logic lives
+/// here and visibility.rs keeps its "no I/O" property.
+///
+/// The slug is written verbatim from the inbound gossip/notify message, so it is
+/// untrusted input, not a canonical key. The decision is fail-closed by
+/// construction: the only KEEP paths are (a) a slug with no `/` (cannot name a
+/// local `owner/name` pair, so remote by definition), (b) all matched local
+/// records are readable, and (c) no local record matches (remote/gossip-only).
+/// Any local match the caller cannot read at root DROPs the row. There is no
+/// catch-all keep on unexpected state.
+///
+/// Slug/record owner keys are matched prefix-tolerantly (one is a prefix of the
+/// other), covering the exact short-key, the full `did:key:` form, and the
+/// URL-truncated 8-char form. Prefix over-match can only over-drop a genuinely
+/// remote row (fail-safe), never over-serve a private local one.
+///
+/// The live call sites are the #112 (GraphQL) and #114 (REST) feed handlers,
+/// added in the following units; exercised by the unit tests below meanwhile.
+pub fn ref_update_row_visible(
+    deduped: &[RepoRecord],
+    rules_by_repo: &HashMap<String, Vec<VisibilityRule>>,
+    caller: Option<&str>,
+    row_repo: &str,
+) -> bool {
+    // A slug with no '/' cannot name a local owner/name pair — remote by
+    // definition (same branch as "matches nothing local") → KEEP.
+    if row_repo.rsplit_once('/').is_none() {
+        return true;
+    }
+
+    // Match each local record with the shared slug predicate (one matcher, so
+    // this gate and the collector's quarantine drop cannot disagree about which
+    // rows a repo owns), then fail closed on any matched record the caller
+    // cannot read at root.
+    for record in deduped {
+        if !ref_update_row_names_repo(record, row_repo) {
+            continue;
+        }
+        let rules = rules_by_repo
+            .get(&record.id)
+            .map(Vec::as_slice)
+            .unwrap_or(&[]);
+        if !listable_at_root(rules, record.is_public, &record.owner_did, caller) {
+            return false;
+        }
+    }
+
+    // Reached only if every matched local record is readable, or nothing local
+    // matched (remote/gossip-only). Both are the KEEP paths; there is no
+    // default-keep on unexpected state — an unreadable match already returned.
+    true
+}
+
+/// Whether `row_repo`'s peer-supplied slug names the local `record`. The single
+/// match predicate shared by the feed gate ([`ref_update_row_visible`]) and the
+/// quarantine hard-drop in the ref-update collector, so the two cannot diverge
+/// about which rows a repo owns — a second, drifting matcher is exactly the #134
+/// slug-collision class.
+///
+/// A record matches when the slug's `name` half is equal and one owner key is a
+/// prefix of the other (prefix-tolerant: exact short key, full `did:key:` form,
+/// and the URL-truncated 8-char form). Both the slug owner and the record owner
+/// are reduced to their last ':'-delimited segment before comparing. The node's
+/// own emitter builds the wire slug via `normalize_owner_key` (bare short key for
+/// a single-segment `did:key:`, the full DID for every other method; see
+/// api/repos.rs), but the stored slug is UNTRUSTED: a peer can broadcast a row
+/// under any owner form, including a method-stripped `user/name`. Reducing both
+/// sides to the trailing segment matches a repo's own rows whichever form keyed
+/// them, and still catches an attacker-planted short slug.
+///
+/// This intentionally diverges from `did_matches` / `DEDUP_CTE`, which strip only
+/// bare `did:key:` and keep other DID methods whole: those compare trusted,
+/// canonical DIDs, while this slug is untrusted. Applying the keep-whole rule here
+/// would fail open: a hostile `user/name` slug would not prefix-match a private
+/// `did:web:host:user` record and would leak. The price is a fail-SAFE over-match
+/// when a remote owner shares both a trailing segment and a repo name with a local
+/// private repo (negligible for full did:key ids; only did:web / truncated forms
+/// collide): it can hide a genuinely remote row, never serve a private one.
+pub fn ref_update_row_names_repo(record: &RepoRecord, row_repo: &str) -> bool {
+    let Some((owner_part, name)) = row_repo.rsplit_once('/') else {
+        return false;
+    };
+    if record.name != name {
+        return false;
+    }
+    let row_key = owner_part.split(':').next_back().unwrap_or(owner_part);
+    let record_key = record
+        .owner_did
+        .split(':')
+        .next_back()
+        .unwrap_or(&record.owner_did);
+    record_key.starts_with(row_key) || row_key.starts_with(record_key)
+}
+
+/// The subtree path globs that `caller` (None = anonymous) may NOT read, given
+/// the repo's rules. Whole-repo ("/") rules are excluded: a denied whole-repo
+/// read is handled by the 404 gate before a clone ever starts. Each remaining
+/// rule is reported when `visibility_check` denies the caller at the glob's
+/// representative path. Used by the clean-clone client to sparse-exclude the
+/// private paths from checkout.
+pub fn withheld_globs(
+    rules: &[VisibilityRule],
+    is_public: bool,
+    owner_did: &str,
+    caller: Option<&str>,
+) -> Vec<String> {
+    rules
+        .iter()
+        .filter(|r| r.path_glob != "/")
+        .filter(|r| {
+            let probe = glob_prefix(&r.path_glob);
+            visibility_check(rules, is_public, owner_did, caller, probe) == Decision::Deny
+        })
+        .map(|r| r.path_glob.clone())
+        .collect()
+}
+
+/// The allowed globs that sit strictly underneath a denied glob. A clean-clone
+/// client sparse-excludes everything in `withheld_globs`, which would also hide
+/// these nested allowed paths; re-including them restores the caller's access.
+/// Example: with `/secret/**` denied and `/secret/public/**` allowed for the
+/// same caller, `/secret/public/**` is returned here so the client re-includes
+/// it after excluding `/secret/`.
+pub fn reincluded_globs(
+    rules: &[VisibilityRule],
+    is_public: bool,
+    owner_did: &str,
+    caller: Option<&str>,
+) -> Vec<String> {
+    let denied: Vec<&str> = rules
+        .iter()
+        .filter(|r| r.path_glob != "/")
+        .filter(|r| {
+            visibility_check(
+                rules,
+                is_public,
+                owner_did,
+                caller,
+                glob_prefix(&r.path_glob),
+            ) == Decision::Deny
+        })
+        .map(|r| glob_prefix(&r.path_glob))
+        .collect();
+
+    rules
+        .iter()
+        .filter(|r| r.path_glob != "/")
+        .filter(|r| {
+            visibility_check(
+                rules,
+                is_public,
+                owner_did,
+                caller,
+                glob_prefix(&r.path_glob),
+            ) == Decision::Allow
+        })
+        .filter(|r| {
+            let p = glob_prefix(&r.path_glob);
+            denied
+                .iter()
+                .any(|d| *d != p && p.starts_with(&format!("{d}/")))
+        })
+        .map(|r| r.path_glob.clone())
+        .collect()
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use crate::db::VisibilityMode;
+    use chrono::Utc;
+
+    fn rule(path_glob: &str, mode: VisibilityMode, readers: &[&str]) -> VisibilityRule {
+        VisibilityRule {
+            id: "x".into(),
+            repo_id: "r1".into(),
+            path_glob: path_glob.into(),
+            mode,
+            reader_dids: readers.iter().map(|s| s.to_string()).collect(),
+            created_by: "did:key:z6MkOwner".into(),
+            created_at: Utc::now(),
+        }
+    }
+
+    const OWNER: &str = "did:key:z6MkOwner";
+
+    #[test]
+    fn withheld_globs_lists_only_denied_subtrees() {
+        let rules = [
+            rule("/secret/**", VisibilityMode::B, &["did:key:z6MkFriend"]),
+            rule("/docs/**", VisibilityMode::B, &["did:key:z6MkStranger"]),
+        ];
+        // Stranger is denied /secret but allowed /docs.
+        let mut got = withheld_globs(&rules, true, OWNER, Some("did:key:z6MkStranger"));
+        got.sort();
+        assert_eq!(got, vec!["/secret/**".to_string()]);
+        // Owner is denied nothing.
+        assert!(withheld_globs(&rules, true, OWNER, Some(OWNER)).is_empty());
+        // Anonymous is denied both.
+        let mut anon = withheld_globs(&rules, true, OWNER, None);
+        anon.sort();
+        assert_eq!(anon, vec!["/docs/**".to_string(), "/secret/**".to_string()]);
+    }
+
+    #[test]
+    fn reincluded_globs_restores_allowed_nested_path() {
+        let rules = [
+            rule("/secret/**", VisibilityMode::B, &["did:key:z6MkFriend"]),
+            rule(
+                "/secret/public/**",
+                VisibilityMode::B,
+                &["did:key:z6MkFriend", "did:key:z6MkStranger"],
+            ),
+        ];
+        // Stranger is denied /secret/** but allowed the nested /secret/public/**.
+        let withheld = withheld_globs(&rules, true, OWNER, Some("did:key:z6MkStranger"));
+        assert_eq!(withheld, vec!["/secret/**".to_string()]);
+        let reinc = reincluded_globs(&rules, true, OWNER, Some("did:key:z6MkStranger"));
+        assert_eq!(reinc, vec!["/secret/public/**".to_string()]);
+        // Owner is denied nothing, so there is nothing to re-include.
+        assert!(reincluded_globs(&rules, true, OWNER, Some(OWNER)).is_empty());
+    }
+
+    #[test]
+    fn no_rules_public_allows_anonymous() {
+        assert_eq!(
+            visibility_check(&[], true, OWNER, None, "/"),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn no_rules_private_denies_anonymous() {
+        assert_eq!(
+            visibility_check(&[], false, OWNER, None, "/"),
+            Decision::Deny
+        );
+    }
+
+    #[test]
+    fn root_rule_denies_anonymous() {
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, "/"),
+            Decision::Deny
+        );
+    }
+
+    #[test]
+    fn root_rule_allows_owner() {
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some(OWNER), "/"),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn root_rule_allows_owner_short_form() {
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some("z6MkOwner"), "/"),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn non_key_owner_bare_short_does_not_match() {
+        // A non-key DID owner (did:gitlawb:z6MkFoo) probed with the bare last
+        // segment (z6MkFoo) must NOT match — the old is_owner would return true
+        // via split(':').next_back(), which this PR tightens.
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, false, "did:gitlawb:z6MkFoo", Some("z6MkFoo"), "/"),
+            Decision::Deny,
+            "bare short must not match a non-key DID owner"
+        );
+        // The full non-key DID still matches itself.
+        assert_eq!(
+            visibility_check(
+                &rules,
+                false,
+                "did:gitlawb:z6MkFoo",
+                Some("did:gitlawb:z6MkFoo"),
+                "/"
+            ),
+            Decision::Allow,
+            "full non-key DID still matches itself"
+        );
+    }
+
+    // #153 forward guard: is_owner must match across bare-key / full-did:key
+    // representations should someone revert to single-side normalize_owner_key.
+    #[test]
+    fn bare_owner_full_caller_allows_owner() {
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, false, "z6MkOwner", Some("did:key:z6MkOwner"), "/"),
+            Decision::Allow,
+            "bare owner + full did:key caller must match (guard against single-side revert)"
+        );
+    }
+
+    // #135 T1: a Mode-B rule on `/secret/**` must DENY the withheld directory's
+    // OWN path `/secret` (the `path == prefix` arm), not just strict descendants —
+    // otherwise get_by_cid's tree gate would serve the /secret tree object and leak
+    // its children. Pins parity with get_tree, which denies the /secret path.
+    #[test]
+    fn subtree_rule_denies_the_withheld_directory_itself() {
+        let reader = "did:key:z6MkReader";
+        let rules = [rule("/secret/**", VisibilityMode::B, &[reader])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, "/secret"),
+            Decision::Deny,
+            "anon denied at the withheld directory's OWN path /secret"
+        );
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, "/public"),
+            Decision::Allow,
+            "anon allowed at a sibling path outside the withheld subtree"
+        );
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some(reader), "/secret"),
+            Decision::Allow,
+            "listed reader allowed at the withheld directory (caller-aware)"
+        );
+    }
+
+    // #153 regression: cross-method DID must still be denied even when the
+    // trailing segment collides with a bare owner key.
+    #[test]
+    fn cross_method_did_denied_with_bare_owner() {
+        let rules = [rule("/", VisibilityMode::A, &[])];
+        assert_eq!(
+            visibility_check(&rules, false, "z6MkFoo", Some("did:gitlawb:z6MkFoo"), "/"),
+            Decision::Deny,
+            "cross-method DID must not match a bare did:key owner"
+        );
+        assert_eq!(
+            visibility_check(&rules, false, "z6MkFoo", Some("did:web:z6MkFoo"), "/"),
+            Decision::Deny,
+            "did:web must not match a bare did:key owner"
+        );
+    }
+
+    #[test]
+    fn root_rule_allows_listed_reader() {
+        let rules = [rule("/", VisibilityMode::A, &["did:key:z6MkFriend"])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some("did:key:z6MkFriend"), "/"),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn root_rule_denies_unlisted_reader() {
+        let rules = [rule("/", VisibilityMode::A, &["did:key:z6MkFriend"])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some("did:key:z6MkStranger"), "/"),
+            Decision::Deny
+        );
+    }
+
+    #[test]
+    fn subtree_rule_matches_descendant_path() {
+        let rules = [rule(
+            "/secret/**",
+            VisibilityMode::B,
+            &["did:key:z6MkFriend"],
+        )];
+        assert_eq!(
+            visibility_check(
+                &rules,
+                true,
+                OWNER,
+                Some("did:key:z6MkStranger"),
+                "/secret/a.rs"
+            ),
+            Decision::Deny
+        );
+        assert_eq!(
+            visibility_check(
+                &rules,
+                true,
+                OWNER,
+                Some("did:key:z6MkFriend"),
+                "/secret/a.rs"
+            ),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn subtree_rule_does_not_affect_root_clone() {
+        // A subtree rule must not gate a whole-repo (path "/") read: the public
+        // fallback applies because the subtree glob does not match "/".
+        let rules = [rule("/secret/**", VisibilityMode::B, &[])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, "/"),
+            Decision::Allow
+        );
+    }
+
+    #[test]
+    fn most_specific_rule_wins() {
+        // Public repo, but /secret is locked. A stranger reading /secret is denied
+        // by the more specific rule even though "/" would allow.
+        let rules = [
+            rule("/", VisibilityMode::A, &["did:key:z6MkStranger"]),
+            rule("/secret/**", VisibilityMode::B, &["did:key:z6MkFriend"]),
+        ];
+        // stranger is a root reader but not a /secret reader
+        assert_eq!(
+            visibility_check(
+                &rules,
+                true,
+                OWNER,
+                Some("did:key:z6MkStranger"),
+                "/secret/a.rs"
+            ),
+            Decision::Deny
+        );
+        // stranger can still read root
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, Some("did:key:z6MkStranger"), "/"),
+            Decision::Allow
+        );
+    }
+
+    // Mirrors the gossip-announce gate in git_receive_pack: announce iff an
+    // anonymous caller can read "/".
+    #[test]
+    fn announce_gate_matches_public_readability() {
+        let announce = |rules: &[VisibilityRule], is_public: bool| {
+            visibility_check(rules, is_public, OWNER, None, "/") == Decision::Allow
+        };
+        // Public repo, no rules → announce.
+        assert!(announce(&[], true));
+        // Legacy private repo (is_public false, no rules) → silent.
+        assert!(!announce(&[], false));
+        // Mode A whole-repo rule with no public readers → silent.
+        assert!(!announce(&[rule("/", VisibilityMode::A, &[])], true));
+        // Mode B public repo with a private subtree → still announce.
+        assert!(announce(
+            &[rule("/secret/**", VisibilityMode::B, &[])],
+            true
+        ));
+    }
+
+    // ── ref_update_row_visible (feed gate) ──────────────────────────────────
+
+    fn rec(id: &str, owner_did: &str, name: &str, is_public: bool) -> RepoRecord {
+        RepoRecord {
+            id: id.into(),
+            name: name.into(),
+            owner_did: owner_did.into(),
+            description: None,
+            is_public,
+            default_branch: "main".into(),
+            created_at: Utc::now(),
+            updated_at: Utc::now(),
+            disk_path: format!("/srv/{id}"),
+            forked_from: None,
+            machine_id: None,
+        }
+    }
+
+    fn rules_for(entries: &[(&str, &[VisibilityRule])]) -> HashMap<String, Vec<VisibilityRule>> {
+        entries
+            .iter()
+            .map(|(id, rs)| (id.to_string(), rs.to_vec()))
+            .collect()
+    }
+
+    #[test]
+    fn feed_public_local_repo_kept_for_anon() {
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", true)];
+        let rules = HashMap::new();
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "z6MkOwner/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_private_local_repo_dropped_for_anon_kept_for_owner() {
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", false)];
+        let rules = HashMap::new();
+        // Anonymous → drop.
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "z6MkOwner/widget"
+        ));
+        // Owner (full DID) → keep.
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            Some("did:key:z6MkOwner"),
+            "z6MkOwner/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_root_rule_reader_reincluded() {
+        // Private repo (is_public=false) with a root rule granting a named
+        // reader. Delegates to listable_at_root: anon and non-reader denied,
+        // named reader allowed.
+        let deduped = [rec("r1", OWNER, "widget", false)];
+        let root = [rule("/", VisibilityMode::A, &["did:key:z6MkFriend"])];
+        let rules = rules_for(&[("r1", &root)]);
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "z6MkOwner/widget"
+        ));
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            Some("did:key:z6MkStranger"),
+            "z6MkOwner/widget"
+        ));
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            Some("did:key:z6MkFriend"),
+            "z6MkOwner/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_alias_full_did_slug_dropped_for_anon() {
+        // Owner stored full-DID; slug also carries the full-DID form. Still
+        // matches (row_key normalizes to the short key) → drop. Round 1's
+        // string-match would have leaked this.
+        let deduped = [rec("r1", "did:key:zABC", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "did:key:zABC/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_truncated_key_slug_dropped_for_anon() {
+        // Slug carries an 8-char URL-truncated prefix of the owner key; still
+        // matches via prefix tolerance → drop. Round 2's get_repo path leaked.
+        let deduped = [rec("r1", "did:key:zABCDEFGH", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "zABCDEF/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_mirror_coexistence_private_canonical_dropped_for_anon() {
+        // Pure-level mirror-coexistence: the deduped set contains only the
+        // private canonical record for (owner,name). A matching slug drops for
+        // anon. (DB-level dedup survivor property is pinned separately.)
+        let deduped = [rec("uuid-canonical", "did:key:z6Mkwbud", "nipmod", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "z6Mkwbud/nipmod"
+        ));
+    }
+
+    #[test]
+    fn feed_empty_owner_slug_matches_and_drops() {
+        // Slug "/name": empty owner_part → row_key "" → starts_with("") matches
+        // every same-named record. Fail-safe pin for a private repo.
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(&deduped, &rules, None, "/widget"));
+    }
+
+    #[test]
+    fn feed_one_char_owner_slug_matches_and_drops() {
+        // 1-char owner prefix that the private repo's key starts with → match.
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(&deduped, &rules, None, "z/widget"));
+    }
+
+    #[test]
+    fn feed_remote_slug_no_match_kept() {
+        // Different owner key, no prefix relation → no local match → keep.
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", false)];
+        let rules = HashMap::new();
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "zZZZOTHER/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_private_didweb_short_slug_dropped_for_anon() {
+        // A private did:web repo must drop its row for anon when the slug arrives
+        // in the short `{last-segment}/{name}` form. Post-#141 the emitter no longer
+        // produces this form for did:web (normalize_owner_key keeps the full DID),
+        // so this is the untrusted/crafted variant a peer can broadcast; the full-DID
+        // variant the emitter now sends is covered by the next test. A did:key-aware
+        // (keep-whole) rule would fail to match `alice` against `did:web:host:alice`
+        // and leak.
+        let deduped = [rec("r1", "did:web:host:alice", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "alice/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_multi_segment_did_slug_dropped_for_anon() {
+        // A private repo owned by a multi-segment DID must also fail closed under
+        // the full-DID slug form. Post-#141 this IS the form the emitter broadcasts
+        // (normalize_owner_key keeps non-did:key methods whole), and a peer can craft
+        // it too. The gate drops it: both sides reduce to the last ':' segment
+        // ("user"), so they match. Fail-safe regardless of which form keyed the row.
+        let deduped = [rec("r1", "did:web:host:user", "widget", false)];
+        let rules = HashMap::new();
+        assert!(!ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "did:web:host:user/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_multi_segment_did_slug_kept_for_public() {
+        // Symmetric keep-side: a PUBLIC multi-segment-DID repo's row must still be
+        // returned to anon after the last-':'-segment normalization — guards
+        // against a regression that over-drops legitimate did:web rows.
+        let deduped = [rec("r1", "did:web:host:user", "widget", true)];
+        let rules = HashMap::new();
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "did:web:host:user/widget"
+        ));
+    }
+
+    #[test]
+    fn feed_malformed_slug_no_slash_kept_no_panic() {
+        let deduped = [rec("r1", "did:key:z6MkOwner", "widget", false)];
+        let rules = HashMap::new();
+        assert!(ref_update_row_visible(&deduped, &rules, None, "noslug"));
+    }
+
+    #[test]
+    fn feed_empty_deduped_set_keeps_any_slug() {
+        let deduped: [RepoRecord; 0] = [];
+        let rules = HashMap::new();
+        assert!(ref_update_row_visible(
+            &deduped,
+            &rules,
+            None,
+            "z6MkOwner/widget"
+        ));
+        assert!(ref_update_row_visible(&deduped, &rules, None, "anything"));
+    }
+
+    // The shared slug matcher underpinning both the feed gate and the collector's
+    // quarantine drop: it must recognize a repo's own row across every owner-DID
+    // form (bare short key, full did:key, URL-truncated prefix) and must not
+    // over-match a different name or an unrelated owner. The quarantine drop calls
+    // this directly, so its match contract is load-bearing for withholding a
+    // quarantined mirror from a caller who matches the mirror's owner_did.
+    #[test]
+    fn names_repo_matches_owner_forms_and_rejects_mismatches() {
+        // Bare short owner key (the form upsert_mirror_repo stores).
+        let bare = rec("m", "z6MkQuar", "secret", false);
+        assert!(ref_update_row_names_repo(&bare, "z6MkQuar/secret"));
+        // Full did:key owner; the short-segment slug still matches via last-segment.
+        let full = rec("c", "did:key:z6MkQuar", "secret", false);
+        assert!(ref_update_row_names_repo(&full, "z6MkQuar/secret"));
+        assert!(ref_update_row_names_repo(&full, "did:key:z6MkQuar/secret"));
+        // URL-truncated 8-char prefix slug → prefix-tolerant match.
+        let long = rec("l", "did:key:z6MkQuarLONGKEY", "secret", false);
+        assert!(ref_update_row_names_repo(&long, "z6MkQuar/secret"));
+        // Different name, different owner, and no-slash → no match.
+        assert!(!ref_update_row_names_repo(&bare, "z6MkQuar/other"));
+        assert!(!ref_update_row_names_repo(&bare, "z6MkOther/secret"));
+        assert!(!ref_update_row_names_repo(&bare, "noslash"));
+    }
+
+    // #101: a deny rule must withhold a path that denotes the same characters in
+    // a different Unicode normalization form. Without NFC normalization at the
+    // matcher seam, an NFC-authored rule byte-compares unequal to an NFD-stored
+    // path and the blob leaks on the replication path.
+    #[test]
+    fn matcher_withholds_across_nfc_nfd_normalization_skew() {
+        // "é" composed (NFC, U+00E9) in the rule; decomposed (NFD, e + U+0301)
+        // in the committed path.
+        let nfc_rule = "/s\u{00e9}cret/**";
+        let nfd_path = "/se\u{0301}cret/key.pem";
+        let rules = [rule(nfc_rule, VisibilityMode::B, &["did:key:z6MkFriend"])];
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, nfd_path),
+            Decision::Deny,
+            "NFC-authored deny rule must withhold the canonically-equivalent NFD path"
+        );
+
+        // Mirror: rule authored NFD, path committed NFC.
+        let nfd_rule = "/se\u{0301}cret/**";
+        let nfc_path = "/s\u{00e9}cret/key.pem";
+        let rules2 = [rule(nfd_rule, VisibilityMode::B, &["did:key:z6MkFriend"])];
+        assert_eq!(
+            visibility_check(&rules2, true, OWNER, None, nfc_path),
+            Decision::Deny,
+            "NFD-authored deny rule must withhold the canonically-equivalent NFC path"
+        );
+
+        // A genuinely different path is still allowed (no over-withholding).
+        assert_eq!(
+            visibility_check(&rules, true, OWNER, None, "/public/x.txt"),
+            Decision::Allow
+        );
+    }
+}

crates/gitlawb-node/src/webhooks.rs

@@ -24,8 +24,8 @@ type HmacSha256 = Hmac<Sha256>;
 
 /// Compute `sha256=<hex>` HMAC signature for a webhook payload.
 fn sign_payload(secret: &str, payload: &[u8]) -> String {
-    let mut mac = HmacSha256::new_from_slice(secret.as_bytes())
-        .expect("HMAC accepts any key length");
+    let mut mac =
+        HmacSha256::new_from_slice(secret.as_bytes()).expect("HMAC accepts any key length");
     mac.update(payload);
     format!("sha256={}", hex::encode(mac.finalize().into_bytes()))
 }
@@ -93,18 +93,29 @@ async fn fire_event_async(
             }
 
             match req.send().await {
-                Ok(resp) => tracing::info!(
-                    url = %hook.url,
-                    event = %event_name,
-                    status = %resp.status(),
-                    "webhook delivered"
-                ),
-                Err(e) => tracing::warn!(
-                    url = %hook.url,
-                    event = %event_name,
-                    err = %e,
-                    "webhook delivery failed"
-                ),
+                Ok(resp) => {
+                    let result_label = if resp.status().is_success() {
+                        "ok"
+                    } else {
+                        "http_error"
+                    };
+                    crate::metrics::record_webhook_delivery(result_label);
+                    tracing::info!(
+                        url = %hook.url,
+                        event = %event_name,
+                        status = %resp.status(),
+                        "webhook delivered"
+                    )
+                }
+                Err(e) => {
+                    crate::metrics::record_webhook_delivery("network_error");
+                    tracing::warn!(
+                        url = %hook.url,
+                        event = %event_name,
+                        err = %e,
+                        "webhook delivery failed"
+                    )
+                }
             }
         });
     }

crates/gitlawb-node/tests/inv22_gates.rs

@@ -0,0 +1,139 @@
+//! #174 U6 — INV-22 completeness guard (rung-raising).
+//!
+//! INV-22: a permit held per op recovers only if every path that holds it is also
+//! duration-bounded and reaps the process group before releasing admission, and every
+//! detached git/blocking task carries its own admission. PR #174 fixed five paths
+//! (U1-U5) that violated this. Each fix has a per-unit RED/GREEN regression; together
+//! those form the five-revert matrix. This guard adds the missing piece: a source-scan
+//! tripwire that fails when a NEW site reintroduces the class, or when one of the five
+//! gates is removed.
+//!
+//! It lives in `tests/` (a separate crate) on purpose: a guard that scanned the same
+//! file it lives in would match its own identifier literals and pass vacuously. Here
+//! the scanned `src/` files never contain this file's literals, so each check is
+//! load-bearing — reverting the named gate turns the assertion red.
+//!
+//! These are deliberately coarse structural checks, not a parser. They cannot prove a
+//! gate is *correct* (the per-unit tests do that); they prove a gate is *present and
+//! not bypassed*, which is what stops the class from silently regressing.
+
+use std::path::Path;
+
+fn src(rel: &str) -> String {
+    let p = Path::new(env!("CARGO_MANIFEST_DIR")).join("src").join(rel);
+    std::fs::read_to_string(&p).unwrap_or_else(|e| panic!("read {}: {e}", p.display()))
+}
+
+#[test]
+fn inv22_concurrency_gates_present_and_not_bypassed() {
+    let repos = src("api/repos.rs");
+    let smart_http = src("git/smart_http.rs");
+    let vis = src("git/visibility_pack.rs");
+    let ipfs = src("api/ipfs.rs");
+
+    // U1 / P1-a: run_bounded_git stands the watchdog down only after confirming the
+    // child actually terminated (WNOWAIT), not on the raw stdout-drain EOF — otherwise
+    // a child that closes stdout then hangs pins the permit past the deadline. The
+    // probe is defined and called, so >= 2 occurrences; reverting the fix removes both.
+    assert!(
+        vis.matches("child_terminated_without_reaping").count() >= 2,
+        "U1/P1-a gate missing: run_bounded_git must confirm child exit via \
+         child_terminated_without_reaping before signalling the watchdog"
+    );
+
+    // U2 / P1-c: on client disconnect KillGroupOnDrop must launch a detached reaper
+    // that runs the full TERM/grace/KILL/reap, not a lone SIGTERM. The reaper is spawned
+    // via a runtime handle in Drop; `Handle::try_current` is unique to that launch (the
+    // timeout path already has an async context and never calls it).
+    assert!(
+        smart_http.contains("Handle::try_current"),
+        "U2/P1-c gate missing: KillGroupOnDrop::drop must launch the full \
+         TERM/grace/KILL reaper on disconnect (Handle::try_current), not a lone SIGTERM"
+    );
+
+    // U4 / P1-d: git_receive_pack must acquire the per-source write sub-cap before the
+    // global write permit. The acquire reads `state.git_write_per_caller`; comments name
+    // the field without the `state.` prefix, so this targets the real acquire site.
+    assert!(
+        repos.contains("state.git_write_per_caller"),
+        "U4/P1-d gate missing: git_receive_pack must acquire the per-source write cap \
+         (state.git_write_per_caller) before the global write permit"
+    );
+
+    // U5 / P1-e: the detached post-push encryption walk must run through the
+    // admission-gated helper, which is wired to the shared encrypt pool.
+    assert!(
+        repos.contains("fn withheld_recipients_gated")
+            && repos.contains("state.git_encrypt_semaphore"),
+        "U5/P1-e gate missing: the encryption walk must run through \
+         withheld_recipients_gated, which acquires git_encrypt_semaphore"
+    );
+
+    // U1 / R2 (#173 round-10): the path-scoped filtered-pack serve must thread the
+    // caller's AdmissionGuard through BOTH git stages so read + per-caller admission is
+    // held until the pack-objects group is reaped on disconnect, closing the cap bypass
+    // the plain upload_pack path already fixed. Two load-bearing markers: rev-list hands
+    // the disarmed guard back (its tuple return type), and build_filtered_pack forwards
+    // that guard into the pack-objects stage (the `admission` arg after the
+    // "pack-objects" label). Reverting either — dropping the guard between stages, or
+    // passing `None` to pack-objects — trips this.
+    assert!(
+        smart_http.contains("Result<(Vec<String>, Option<AdmissionGuard>)>")
+            && smart_http.contains("\"pack-objects\",\n        admission,"),
+        "U1/R2 gate missing: build_filtered_pack must thread the AdmissionGuard through \
+         rev-list -> pack-objects so the permits are held until the pack-objects group \
+         is reaped on disconnect (the path-scoped half of #174 P1-a)"
+    );
+
+    // U2 / R1 (#173 round-10): the `GET /ipfs/{cid}` serve pipeline must run in a
+    // DETACHED tokio task that OWNS the AdmissionGuard built from BOTH walk permits, so a
+    // cancelled or timed-out request releases admission only after the spawned (bounded)
+    // work completes — not the instant the handler future drops (the /ipfs half of #174
+    // P1-a). Two load-bearing markers: the guard is constructed from the two named
+    // permits, and the whole pipeline is moved into a `tokio::spawn`. Reverting to
+    // handler-local permits (dropping the guard/spawn) trips this.
+    assert!(
+        ipfs.contains("AdmissionGuard::new(ipfs_walk_permit, ipfs_caller_permit)")
+            && ipfs.contains(
+                "let serve: tokio::task::JoinHandle<Result<Response>> = tokio::spawn(async move {"
+            ),
+        "U2/R1 gate missing: get_by_cid must move both /ipfs admission permits into an \
+         AdmissionGuard owned by a detached tokio::spawn task so admission is released \
+         only after the spawned serve work completes (the /ipfs half of #174 P1-a)"
+    );
+
+    // U2 / KTD2 (#173 round-10): the probe/read children on the /ipfs path must be the
+    // duration-bounded twins (process-group teardown via run_bounded_git), not the bare
+    // `store::object_type` / `read_object_content` (or an unbounded `cat-file -s`) a tokio
+    // timeout cannot cancel — otherwise a wedged cat-file lingers and pins the held
+    // admission past the deadline. Reverting any twin call site back to a bare read trips
+    // this.
+    assert!(
+        ipfs.contains("object_type_bounded(")
+            && ipfs.contains("object_size_bounded(")
+            && ipfs.contains("read_object_content_bounded("),
+        "U2/KTD2 gate missing: the /ipfs probe+read must call the run_bounded_git-backed \
+         *_bounded twins so a wedged cat-file is reaped at the deadline, not left to pin \
+         the held /ipfs walk admission"
+    );
+
+    // P1-e non-bypass tripwire: the bounded recipients walk is spawn_blocking'd nowhere
+    // but inside withheld_recipients_gated. A second call site (count > 1) is a new
+    // detached git walk that skips the admission gate — exactly the class U5 closed.
+    assert_eq!(
+        repos.matches("withheld_blob_recipients_bounded").count(),
+        1,
+        "P1-e bypass: the bounded recipients walk must be invoked only inside \
+         withheld_recipients_gated; a new call site bypasses the encrypt-walk admission cap"
+    );
+
+    // U4 / P2-2: the detached post-push encryption task must be gated by the per-repo
+    // coalescing set (`encrypt_inflight.try_begin`) so the OUTSTANDING parked-task set is
+    // bounded to <=1 per repo. Removing the gate lets N rapid pushes spawn N parked
+    // waiters (the unbounded set U4 closed); the semaphore only caps active walks.
+    assert!(
+        repos.contains("state.encrypt_inflight.try_begin"),
+        "U4/P2-2 gate missing: the detached post-push encryption spawn must consult \
+         encrypt_inflight.try_begin to coalesce per repo (bound the outstanding-task set)"
+    );
+}

crates/gl/Cargo.toml

@@ -1,8 +1,9 @@
 [package]
 name = "gl"
 description = "The gitlawb CLI — identity management, node control, MCP server"
-version.workspace = true
+version = "0.5.1" # x-release-please-version
 edition.workspace = true
+rust-version.workspace = true
 license.workspace = true
 
 [[bin]]
@@ -11,6 +12,7 @@ path = "src/main.rs"
 
 [dependencies]
 gitlawb-core = { path = "../gitlawb-core" }
+icaptcha-client = { path = "../icaptcha-client" }
 tokio = { workspace = true }
 serde = { workspace = true }
 serde_json = { workspace = true }

crates/gl/src/agent.rs

@@ -36,7 +36,11 @@ pub enum AgentCmd {
 
 pub async fn run(args: AgentArgs) -> Result<()> {
     match args.cmd {
-        AgentCmd::List { node, capability, dir: _ } => cmd_list(node, capability).await,
+        AgentCmd::List {
+            node,
+            capability,
+            dir: _,
+        } => cmd_list(node, capability).await,
         AgentCmd::Show { did, node } => cmd_show(did, node).await,
     }
 }
@@ -49,7 +53,10 @@ async fn cmd_list(node: String, capability: Option<String>) -> Result<()> {
         None => "/api/v1/agents".to_string(),
     };
 
-    let resp = client.get(&path).await.context("failed to connect to node")?;
+    let resp = client
+        .get(&path)
+        .await
+        .context("failed to connect to node")?;
     let status = resp.status();
 
     if status == reqwest::StatusCode::NOT_FOUND {
@@ -59,7 +66,10 @@ async fn cmd_list(node: String, capability: Option<String>) -> Result<()> {
         );
     }
 
-    let body: Value = resp.json().await.context("invalid JSON from node — is GITLAWB_NODE correct?")?;
+    let body: Value = resp
+        .json()
+        .await
+        .context("invalid JSON from node — is GITLAWB_NODE correct?")?;
 
     if !status.is_success() {
         let msg = body["message"].as_str().unwrap_or("unknown error");
@@ -76,10 +86,20 @@ async fn cmd_list(node: String, capability: Option<String>) -> Result<()> {
     println!("Agents on {} ({} total)\n", node, agents.len());
     for agent in &agents {
         let did = agent["did"].as_str().unwrap_or("?");
-        let short = did.split(':').next_back().map(|s| &s[..s.len().min(16)]).unwrap_or("?");
+        let short = did
+            .split(':')
+            .next_back()
+            .map(|s| &s[..s.len().min(16)])
+            .unwrap_or("?");
         let trust = agent["trust_score"].as_f64().unwrap_or(0.0);
-        let caps = agent["capabilities"].as_array()
-            .map(|a| a.iter().filter_map(|v| v.as_str()).collect::<Vec<_>>().join(", "))
+        let caps = agent["capabilities"]
+            .as_array()
+            .map(|a| {
+                a.iter()
+                    .filter_map(|v| v.as_str())
+                    .collect::<Vec<_>>()
+                    .join(", ")
+            })
             .unwrap_or_default();
         let model = agent["model"].as_str().unwrap_or("");
         println!("  {short}…  trust={trust:.2}  {caps}");
@@ -106,7 +126,10 @@ async fn cmd_show(did: String, node: String) -> Result<()> {
         );
     }
 
-    let agent: Value = resp.json().await.context("invalid JSON from node — is GITLAWB_NODE correct?")?;
+    let agent: Value = resp
+        .json()
+        .await
+        .context("invalid JSON from node — is GITLAWB_NODE correct?")?;
 
     if !status.is_success() {
         let msg = agent["message"].as_str().unwrap_or("unknown error");
@@ -115,8 +138,14 @@ async fn cmd_show(did: String, node: String) -> Result<()> {
 
     let full_did = agent["did"].as_str().unwrap_or("?");
     let trust = agent["trust_score"].as_f64().unwrap_or(0.0);
-    let caps = agent["capabilities"].as_array()
-        .map(|a| a.iter().filter_map(|v| v.as_str()).collect::<Vec<_>>().join(", "))
+    let caps = agent["capabilities"]
+        .as_array()
+        .map(|a| {
+            a.iter()
+                .filter_map(|v| v.as_str())
+                .collect::<Vec<_>>()
+                .join(", ")
+        })
         .unwrap_or_default();
     let registered = agent["registered_at"].as_str().unwrap_or("?");
     let model = agent["model"].as_str().unwrap_or("(none)");
@@ -172,7 +201,9 @@ mod tests {
             .create_async()
             .await;
 
-        cmd_list(server.url(), Some("git:push".to_string())).await.unwrap();
+        cmd_list(server.url(), Some("git:push".to_string()))
+            .await
+            .unwrap();
         _m.assert_async().await;
     }
 
@@ -217,7 +248,9 @@ mod tests {
             .create_async()
             .await;
 
-        cmd_show("did:key:z6MkTest".to_string(), server.url()).await.unwrap();
+        cmd_show("did:key:z6MkTest".to_string(), server.url())
+            .await
+            .unwrap();
     }
 
     #[tokio::test]
@@ -231,7 +264,9 @@ mod tests {
             .create_async()
             .await;
 
-        let err = cmd_show("did:key:z6MkMissing".to_string(), server.url()).await.unwrap_err();
+        let err = cmd_show("did:key:z6MkMissing".to_string(), server.url())
+            .await
+            .unwrap_err();
         assert!(err.to_string().contains("agents API") || err.to_string().contains("not found"));
     }
 
@@ -246,6 +281,8 @@ mod tests {
             .create_async()
             .await;
 
-        cmd_show("did:key:z6MkHigh".to_string(), server.url()).await.unwrap();
+        cmd_show("did:key:z6MkHigh".to_string(), server.url())
+            .await
+            .unwrap();
     }
 }