docs(pinning): qualify pin admission, per-copy durability, and loop sizing

- the opening now names the admission gates: publish-durability
  confirmation plus root replication; private and non-replicating repos
  and withheld objects are out of "every push pins" wording
- warm-table and durability copy drop the Filecoin backing claim the v3
  API does not document
- the JWT-unset paragraph now says the permit and re-derivation walk
  only run when the push was admitted, and an empty IPFS_API can still
  briefly touch the pin pool on a non-empty list
- the semaphore section and README row state the two-loops-per-push
  fan-out so the default of eight reads as roughly four dual-tier
  pushes
- the backfill and running-both wording is conditional on object
  selection and per-sink success, naming the reconciliation sweep

README.md

@@ -411,7 +411,7 @@ Important node settings:
 | `GITLAWB_MAX_CONCURRENT_GIT_OPS` | Max concurrent served git READ ops (upload-pack and its `info/refs` advertisement) across all callers; over-cap sheds a 503 + Retry-After. Anonymous reads draw from this pool, so pair it with `GITLAWB_MAX_CONCURRENT_READS_PER_CALLER`. Pushes and the receive-pack advertisement have their own pools, so a read flood cannot shed an authenticated push. Default 128. |
 | `GITLAWB_MAX_CONCURRENT_GIT_PUSHES` | Max concurrent `git-receive-pack` POST operations, in a pool separate from the read pool. The anon receive-pack `info/refs` advertisement runs in a third pool of the same size, disjoint from both, so an advertisement flood cannot shed a push either. Two per-source push caps are derived from this value (`/8`, floor 1) and have no env var of their own. Over-cap sheds a 503 + Retry-After. Default 32. |
 | `GITLAWB_MAX_CONCURRENT_READS_PER_CALLER` | Max concurrent read ops a single caller may hold, so one caller cannot monopolize the read pool. Keyed on the resolved source IP, never the DID, and only as granular as `GITLAWB_TRUSTED_PROXY`: left unset, a node behind an edge or NAT keys every caller on the edge IP and this collapses to one global cap. Default 16. |
-| `GITLAWB_MAX_CONCURRENT_PIN_TASKS` | Max post-push pin loops (IPFS + Pinata) running concurrently across all repos. This caps how many loops RUN at once, not how much object-id list memory the node retains: on the local IPFS path a loop parked waiting for a permit still holds its full list. Do not size memory from this knob alone. A loop over cap waits, never drops a pin. Default 8. |
+| `GITLAWB_MAX_CONCURRENT_PIN_TASKS` | Max post-push pin loops (IPFS + Pinata) running concurrently across all repos. This caps how many loops RUN at once, not how much object-id list memory the node retains: on the local IPFS path a loop parked waiting for a permit still holds its full list. Do not size memory from this knob alone. A loop over cap waits, never drops a pin. Up to two loops run per push when both IPFS and Pinata are configured. See [docs/STORAGE-AND-PINNING.md](docs/STORAGE-AND-PINNING.md) for the two-tier model, dedup, and parked-list memory. Default 8. |
 | `GITLAWB_REPO_LEASE_MAX_WAITERS` | Max pushes parked at once waiting for the same repo's write lease. Each waiter pins its buffered pack body, so this bounds that memory for a hot repo; past the cap the newest push sheds a 503 + Retry-After instead of queueing. Pushes to other repos are unaffected, and the lease holder is not counted. Default 8. |
 | `GITLAWB_MAX_CONCURRENT_IPFS_WALKS` | Max concurrent `GET /ipfs/{cid}` visibility walks across all callers (own pool, disjoint from the served-git pools); over-cap sheds 503. Default 32. |
 | `GITLAWB_IPFS_WALK_PER_SOURCE` | Max concurrent `/ipfs` walks a single source IP may hold. Default 4. |
@@ -478,6 +478,7 @@ Read:
 
 - [`docs/RUN-A-NODE.md`](docs/RUN-A-NODE.md)
 - [`docs/ECONOMICS.md`](docs/ECONOMICS.md)
+- [`docs/STORAGE-AND-PINNING.md`](docs/STORAGE-AND-PINNING.md)
 
 Use a dedicated low-balance operator wallet. Do not use a treasury wallet as the heartbeat key.
 

docs/STORAGE-AND-PINNING.md

@@ -0,0 +1,118 @@
+# Storage and pinning
+
+How a gitlawb node's **optional post-push pinning tiers** work. This documents
+the behavior implemented in `crates/gitlawb-node/src/ipfs_pin.rs` and
+`crates/gitlawb-node/src/pinata.rs`; it does not change any behavior. Primary
+git storage for clone/fetch lives in bare repos under `GITLAWB_REPOS_DIR`
+(with optional `GITLAWB_TIGRIS_BUCKET` backing), covered in the README
+Configuration table.
+
+## Two-tier model
+
+After a push lands, eligible new git objects can be pinned to up to two
+independent sinks. Both are **opt-in and independent** — a node runs fine with
+neither, either, or both configured.
+
+Pinning does not run on every push. The post-push tail only reaches the pin
+steps when the push passed publish-durability confirmation and the repository
+replicates at root (`announce_at_root`): private repositories and other repos
+that are not anonymously readable at the root skip both public pin paths, and
+path-scoped rules exclude withheld objects. The warm path additionally requires
+this push's own withheld walk to have succeeded. A separate best-effort path can
+pin encrypted withheld blobs to Kubo for authorized readers; it is not a
+two-tier backup and is outside this page's scope.
+
+| Tier | Sink | Module | Enabled by | Purpose |
+|------|------|--------|-----------|---------|
+| Hot  | Local Kubo (IPFS) | `ipfs_pin.rs` | `GITLAWB_IPFS_API` set | Node-local availability; the node is an HTTP client of a co-located Kubo daemon |
+| Warm | Pinata (IPFS) | `pinata.rs` | `GITLAWB_PINATA_JWT` set | Off-node durability + public IPFS gateway reachability |
+
+If a sink's config value is empty, its **upload** step is a no-op — so leaving
+`GITLAWB_PINATA_JWT` unset disables warm-tier *uploads*. The tail's cost is
+conditional on the same admission gates above: only when the push was admitted
+to replication does the warm worker still take a global pin permit and run the
+full object-list re-derivation walk before the upload step returns empty,
+because its gate is the announce/walk state, not the JWT. On a push that was
+not admitted, no warm worker runs at all. Note the no-op applies to pinning
+only, not reads: the hot-tier read path (`ipfs_pin::cat`) returns an error rather
+than a no-op when `GITLAWB_IPFS_API` is unset, so a node that serves the
+encrypted-blob read endpoint needs Kubo configured. An empty `GITLAWB_IPFS_API`
+can still briefly touch the pin pool: the hot worker may take a permit when the
+built object list is non-empty even though the upload call returns immediately.
+
+## Configuration
+
+| Env var | Default | Meaning |
+|---------|---------|---------|
+| `GITLAWB_IPFS_API` | `""` (disabled) | Base URL of the local Kubo HTTP API, e.g. `http://127.0.0.1:5001` |
+| `GITLAWB_PINATA_JWT` | `""` (disabled) | Pinata bearer JWT enabling the warm tier |
+| `GITLAWB_PINATA_UPLOAD_URL` | `https://uploads.pinata.cloud/v3/files` | Pinata v3 upload endpoint |
+| `GITLAWB_MAX_CONCURRENT_PIN_TASKS` | `8` | Cap on concurrent post-push pin loops across all repos |
+
+## How pinning runs
+
+Pinning happens **after** a push is accepted, not on the push's critical path:
+
+- The **hot** tier pins inline in the post-push encrypt/pin task.
+- The **warm** (Pinata) tier runs in a spawned replication tail, so a slow or
+  unreachable Pinata never blocks the pusher.
+
+Both tiers share a single global **pin admission semaphore**
+(`max_concurrent_pin_tasks`). One admitted push with both backends configured
+can hold up to **two** loops on this pool at once, so the default of eight caps
+loops, not pushes: roughly four concurrent all-dual-tier pushes fit before new
+loops wait. The pool **defers rather than sheds**: when it is
+saturated, a pin loop waits for a slot instead of dropping the pin. Each batch is
+bounded by `PIN_BATCH_BUDGET` (120s) so the pin batch itself cannot hold a slot
+indefinitely. The Pinata tail re-derives its object list only *after* acquiring a
+slot, which bounds *its* outstanding memory to O(refs) rather than
+O(pushes × objects) — but that bound is the warm tail's alone. A **hot-tier** pin
+loop takes an owned object list materialized by its caller *before* it waits for
+a slot, so every hot loop parked on a saturated pool is holding its full list:
+the hot side of the parked-list memory is O(pushes × objects), capped per repo by
+`EncryptInflight` but not across repos. Do not size a node's memory from the
+semaphore knob (README says the same).
+Note the budget covers the pin batch, not the preceding object-list re-derivation
+walk: that walk holds the slot too, and bounds only each child git process
+individually (no aggregate deadline).
+
+De-duplication is per sink and best-effort, backed by the single `pinned_cids`
+table: the hot tier skips an object when `has_ipfs_cid` reports true, which is
+`local_ipfs_provenance = TRUE` — a row that records a real local Kubo CID — and
+the warm tier on the nullable `pinata_cid` column, so later pushes normally skip
+objects whose successful pin is already recorded for that sink. The isolation is
+one-directional: a hot-only pin does not suppress the warm tier (`pinata_cid`
+stays null), and a warm-tier pin does not suppress the hot tier either: a row
+with only `pinata_cid` set has `local_ipfs_provenance = FALSE`, so an object
+warm-pinned while `GITLAWB_IPFS_API` was unset can still enter the hot upload
+path once Kubo is configured — provided a later push selects it (the hot walk
+covers objects new to that push) or the enabled reconciliation sweep picks it
+up among eligible public objects — subject to visibility checks, budgets, and
+failure handling. The check-upload-record sequence is not atomic,
+so concurrent post-push tasks for the same object, or a failure to record after a
+successful upload, can still cause a repeat upload attempt.
+
+## Durability notes
+
+- With only the **hot** tier, availability depends on the node (and any IPFS
+  peers that have fetched the CIDs). If the node is down and no peer holds the
+  objects, they are unreachable until it returns.
+- The **warm** tier adds off-node durability via Pinata's Filecoin-backed
+  storage and makes objects reachable through the public IPFS gateway.
+- Running **both** can give a node-local hot copy plus an off-node warm copy:
+  each copy exists only when its own sink's pin succeeded, so a sink failure or
+  a truncated batch can leave an object single-copied (the enabled
+  reconciliation sweep can fill gaps for public objects later). An object
+  warm-pinned before Kubo was configured can still enter the hot path when a
+  later push or the sweep selects it (the dedup paragraph above).
+
+> The two sinks are currently invoked as separate call paths. Unifying them
+> behind a single pluggable backend interface (to add providers such as direct
+> Filecoin deals or self-hosted clusters without touching push logic) is tracked
+> separately.
+
+## See also
+
+- [RUN-A-NODE.md](RUN-A-NODE.md) — provisioning and running a node
+- `crates/gitlawb-node/src/ipfs_pin.rs` — hot-tier implementation
+- `crates/gitlawb-node/src/pinata.rs` — warm-tier implementation